LCD Projector
Model 8914
USER’S MANUAL
401-8914-00
Download from Www.Somanuals.com. All Manuals Search And Download.
Projector
8914
User's Manual – Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read this Manual and
related manuals to ensure the proper use of this product.
After reading them, store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
Trademark acknowledgment
• VGA and XGA are registered trademarks of International Business Machines Corporation.
• Apple and Mac are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the properties of their respective owners.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Content
Content
EASY Menu
23
Aspect, Mode, Brightness, Contrast,
Color, Tint, Sharpness, Whisper, Mirror,
Reset, Filter time, Language,
Go to advanced menu
About contents of package
3
PICTURE Menu
25
3
Brightness, Contrast, Gamma,
Color temp, Color, Tint, Sharpness,
Progressive, My memory
Projector
Control buttons
Remote control
4
5
5
IMAGE Menu
28
Aspect, Over scan, V. position, H. position,
H. phase, H. size, Auto adjust execute
Arrangement
Adjusting the projector's elevator 8
7
INPUT Menu
30
Color space, Component, Video format,
Information
About the filter cover for bottom-up use
9
Connecting your devices
13
10
SETUP Menu
Whisper, Mirror, Volume, Audio
32
SCREEN Menu
Language, Menu position, OSD bright.,
Blank, Start up, MyScreen,
33
Loading batteries
14
15
Using the remote control
MyScreen lock, Message
OPTION Menu
36
Turning on the power
Turning off the power
16
16
search, Auto off, Lamp time,
Filter time, Service
Auto
Adjusting the volume
17
17
17
17
18
Lamp
38
40
41
Temporarily muting the sound
Selecting an input signal
Searcting an input signal
Selecting an aspect ratio
Air filter
Other care
18
Using the automatic adjustment feature 19
Related messages
42
44
Regarding the indicator lamps
Phenomena that may easily be
Adjusting the position
19
Correcting the keystone distortions 20
Using the magnify feature . . . . . . . 20
Freezing the screen. . . . . . . . . . . . 21
Temporarily blanking the screen . . 21
mistaken for machine defects . . . . 46
Warranty and after-service. . . 48
Specifications . . . . . . . . . . . . 48
Technical Guide . . . . . . . . . 1-14
Multifunctional settings . . . . 22
Using the menu function
22
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Projector features / Preparations
Projector features
This projector is used to project various computer signals as well as NTSC/PAL/
SECAM video signals onto a screen. It requires a small space for installation
and produces a large image from a short distance.
High Brightness
Newly developed 230W UHB (Ultra High Brightness) lamp gives you a
bright image on a screen. The image is bright enough for use in lighted
rooms.
Low Noise
WHISPER mode is available for quieter operation. It is perfect for
use in low luminance rooms where low noise is more
important than brightness.
Compact Body
Even with its many features, this projector is extremely compact and slim.
Preparations
Fastening the lens cover
To avoid losing the lens cover, please fasten it the lens cap to the projector using
the strap.
Strap ring
Strap
Strap hole
Bottom side
Fix the strap to the strap ring of the lens cover.
Put the strap into the groove on the rivet.
Push the rivet into the strap hole.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
Part names
Projector
Remote sensor ( 15)
Zoom knob ( 18)
Focus ring ( 18)
Elevator button ( 8)
Vent ( 6)
Front-Right side
Elevator foot ( 8)
Lens ( 16)
Filter cover ( 9,40)
Lamp cover ( 39)
(Air filter and intake vent
are inside.)
(Lamp unit is inside.)
B
Speaker
Control buttons ( 5)
(See the following page.)
Elevator button ( 8)
Ports (See below.)
Elevator foot ( 8)
AC inlet ( 13)
Power switch ( 16)
Vent ( 6)
Rear-Left side
Restart switch (*) ( 46)
RGB IN1 port ( 11)
RGB IN1
RGB IN2
AUDIO 1-IN
AUDIO-OUT
RGB IN2 port ( 11)
COMPONENT
VIDEO ports ( 12)
RGB OUT
CONTROL
AUDIO-OUT port ( 11)
COMPONENT VIDEO
Y
CB/PB
CR/PR
AUDIO 1-IN port ( 11)
C
R/PR
Y
C
B/PB
R-AUDIO 2-L
VIDEO
S-VIDEO
AUDIO 2 L/R port ( 12)
CONTROL port ( 11)
Ports
VIDEO port ( 12)
RGB OUT port ( 11)
S-VIDEO port ( 12)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
LAMP indicator ( 44,45)
TEMP indicator ( 44,45)
Cursor buttons
POWER indicator ( 16)
▲,▼,◄,► ( 22)
RESET button ( 22)
KEYSTONE button ( 20)
STANDBY/ON button
INPUT button ( 17)
(
16)
SEARCH button ( 18)
STANDBY/ON button ( 16)
RGB button ( 17)
AUTO button ( 19)
SEARCH
AUTO
VIDEO
RGB
VIDEO button ( 17)
BLANK button ( 21)
BLANK
ASPECT
ASPECT button ( 18)
MAGNIFY
VOLUME
MUTE
ON
VOLUME button ( 17)
MAGNIFY
ON button ( 20)
OFF
MUTE button ( 17)
FREEZE
KEYSTONE
OFF button ( 20)
KEYSTONE button ( 20)
FREEZE button ( 21)
MENU
POSITION
MENU button ( 22)
POSITION button ( 19)
ENTER
Cursor buttons
ESC button ( 22)
RESET
ESC
▲,▼,◄,► ( 22)
ENTER button ( 22)
RESET button ( 22)
Battery cover ( 14)
(on the back)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Setting up
►Place the projector in a stable position horizontally. A fall or
a turnover could cause an injury and/or damage to the projector. Then using
damaged projector could result in a fire and/or an electric shock.
• Do not place the projector on an unstable, slant or vibrant surface such as a
wobbly or inclined stand.
• Do not place the projector in the side/front/rear-up position, except cleaning
the air filter.
• For the projector installed bottom-up, use the accessory filter cover for bottom-
up use. And in the case of a ceiling installation or the like, contact your dealer
before installation.
►Place the projection in a cool place, and pay attention enough to ventilation.
The high temperature of the projector could cause a fire, a burn and/or
malfunction to the projector.
• Do not stop up, block and cover the projector's vents.
• Keep a space of 30 cm or more between the sides and other objects such as
walls.
• Do not place the projector on a metallic thing or anything weak in heat.
• Do not place the projector on a carpet, cushion or bedding.
• Do not place the projector in direct sunlight or near a hot object such as a
heater.
• Put nothing about lens and vents of the projector. Put nothing on the projector.
• Put nothing that is sucked or sticks to the bottom of projector. This projector
has some intake vents also on the bottom.
►Do not place the projector on the place that gets wet. Damping the projector
or inserting liquid in the projector could cause a fire, an electric shock and/or
malfunction to the projector.
• Do not place the projector in a bathroom or the outdoors.
• Put nothing containing the liquid near the projector.
►Avoid a smoky, humid or dusty place. Placing the projector
in such place could cause a fire, an electric shock and/or malfunction to the
projector.
• Do not place the projector near a humidifier, a smoking space or a kitchen.
►Adjust the direction of the projector to keep the light from directly hitting the
projector's remote sensor.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Arrangement
Refer to the illustrations and tables below to determine the screen size and projection distance.
The values shown in the table are calculated for a full size screen: 1024 x 768
(a) The screen size (diagonal)
(b)
(b) Distance from the projector to the screen (±10%)
(c) The height of the screen (±10%)
(c) up
4:3
(a)
16:9
(a)
(c) down
For the model 8914/8915
4 : 3 screen
16 : 9 screen
(a) Screen
(b) Projection distance
(c) Screen height
[cm (inch)]
down
(b) Projection distance
[m (inch)]
min. max.
(c) Screen height
size
[m (inch)]
[cm (inch)]
[inch (m)]
min.
max.
up
down
-1 (0)
up
30 (0.8) 0.9 (35) 1.1 (42)
40 (1.0) 1.2 (47) 1.4 (57)
50 (1.3) 1.5 (59) 1.8 (71)
60 (1.5) 1.8 (71) 2.2 (86)
1.0 (38) 1.2 (46)
5
6
8
9
(2)
(2)
(3)
(4)
41 (16)
36 (14)
55 (22) 1.3 (51) 1.6 (62) -2 (-1) 48 (19)
69 (27) 1.6 (65) 2.0 (78) -2 (-1) 60 (24)
82 (32) 2.0 (78) 2.4 (94) -2 (-1) 72 (28)
96 (38) 2.3 (91) 2.8 (110) -3 (-1) 84 (33)
70 (1.8) 2.1 (83) 2.6 (100) 11 (4)
80 (2.0) 2.4 (96) 2.9 (115) 12 (5) 110 (43) 2.6 (104) 3.2 (126) -3 (-1) 97 (38)
90 (2.3) 2.7 (108) 3.3 (130) 14 (5) 123 (49) 3.0 (117) 3.6 (141) -4 (-1) 109 (43)
100 (2.5) 3.0 (120) 3.7 (144) 15 (6) 137 (54) 3.3 (131) 4.0 (157) -4 (-2) 121 (47)
120 (3.0) 3.7 (144) 4.4 (174) 18 (7) 165 (65) 4.0 (157) 4.8 (189) -5 (-2) 145 (57)
150 (3.8) 4.6 (181) 5.5 (217) 23 (9) 206 (81) 5.0 (197) 6.0 (237) -6 (-2) 181 (71)
200 (5.1) 6.1 (241) 7.4 (291) 30 (12) 274 (108) 6.7 (263) 8.0 (317) -8 (-3) 241 (95)
250 (6.4) 7.7 (302) 9.2 (364) 38 (15) 343 (135) 8.4 (329) 10.1 (396) -10 (-4) 302 (119)
300 (7.6) 9.2 (363) 11.1 (437) 46 (18) 411 (162) 10.0 (395) 12.1 (476) -12 (-5) 362 (142)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Adjusting the projector's elevator
►Do not adjust the projector’s elevator during use or
immediately after use. Handling while the projector is in a high temperature
could cause a burn and/or malfunction to the projector.
►If you press the elevator button without holding the projector,
the projector might crash down, overturn, smash your fingers and possibly
result in malfunction. To prevent damaging the projector and injuring yourself,
always hold the projector whenever using the elevator buttons to adjust the
elevator feet.
►Do not incline the projector rightward or leftward. Also do not incline it
backward or forward exceeding 9 degrees. Exceeding these range could cause
malfunction, and could shorten the lifetime of the consumables.
►Except for inclining by the elevator feet adjustment, place the projector
horizontally.
You can use the elevator feet to make adjustments if the surface on which you
need to set the projector is uneven or if you otherwise need to adjust the angle of
projection. The adjustment range of the elevator feet is 0 to 9 degrees.
Elevator feet
Elevator button
After making sure that the projector is cool adequately, press and hold in the
elevator buttons while holding the projector.
The elevator buttons and the elevator feet are on the both sides.
Raise or lower the projector to the desired height and release the elevator
buttons.
When you release the elevator buttons, the elevator feet will lock into position.
If necessary, you can also finely adjust the height of the projector by twisting
the elevator feet by hand.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
About the filter cover for bottom-up use
►Do not replace the filter cover during use or immediately after
use. While the projector is connected with a power supply, or the projector is in
a high temperature state, handling could cause an electric shock, a fire, a burn
and/or malfunction to the projector. Before handling the projector, make sure
the power switch is off and the power cord is not plugged in, then wait at least
45 minutes.
When the projector is installed bottom up, please use the accessory filter cover
for bottom-up use. It is higher than usual filter cover, to keep the space for intake
ventilation. Please change the filter cover in the following procedure.
Filter cover’s claws
Filter cover’s claws
To set
To remove
Filter cover
Filter cover for bottom-up use
After making sure that the projector is cool adequately, slowly turn the
projector so that the lens-side is facing up. Please be careful for the projector
not to fall. While the projector is placed lens-side up, hold the projector.
Unhooking the filter cover’s claws, pull the filter cover in the direction of the
arrow to remove it.
Replace the filter cover for bottom-up use and snap it back into place.
Slowly turn the projector so that the top is facing up.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Connecting your devices
►Turn off all devices prior to connecting them to the projector.
Attempting to connect a live device to the projector may generate extremely
loud noises or other abnormalities that may result in malfunction and/or damage
to the device and/or projector
►Use the accessory cable or a designated-type cable for the connection.
Some cables have to be used with core set. A too long cable may cause a
certain picture degradation. Please consult with your dealer for details. For
cables that have a core only at one end, connect the core to the projector.
►Make sure that you connect devices to the correct port. Incorrect connection
may result in malfunction and/or damage to the device and/or projector.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Examples of connection with a computer
* For the audio input, please refer to
the AUDIO item in the SETUP menu.
Audio out
RGB IN1
RGB IN2
RGB out
RS-232C
AUDO 1-IN
AUDIO-OUT
RGB IN2
CONTROL
COMPONENT VIDEO
C
R/PR
Y
C
B/PB
R-AUDIO 2-L
VIDEO
S-VIDEO
RGB cable
RS-232C cable
Connecting to a monitor (output)
RGB IN1
RGB IN2
AUDIO 1-IN
AUDIO-OUT
RGB in
RGB OUT
CONTROL
COMPONENT VIDEO
C
R/PR
C
B/PB
R-AUDIO 2-L
VIDEO
S-VIDEO
RGB cable
Connecting to a speaker with amplifier (output)
RGB IN1
RGB IN2
AUDIO 1-IN
AUDIO-OUT
Audio in
RGB OUT
CONTROL
COMPONENT VIDEO
C
R/PR
Y
C
B/PB
R-AUDIO 2-L
VIDEO
S-VIDEO
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Examples of connection with a VCR/DVD player
Audio/Video cable
RGB IN1
RGB IN2
AUDIO 1-IN
AUDIO-OUT
Video out
RGB OUT
CONTROL
COMPOT VIDE
Audio (L) out
Audio (R) out
C
R/PR
Y
CB/PB
R-AUDIO 2-L
VIDEO
S-VIDEO
S-Video cable
Audio cable
RGB IN1
RGB IN2
AUDIO 1-IN
AUDIO-OUT
S-Video out
Audio (L) out
RGB
CONTROL
COMPOT VIDEO
C
R/PR
Y
CB/PB
Audio (R) out
VIDEO
R-AUDIO 2-L
S-VIDEO
Component video cable
Component video out
RGB IN1
RGB IN2
AUDIO 1-IN
AUDIO-OUT
BB
RR
RGB OUT
CONTROL
COMPT VIDE
C
R/PR
Y
CB/PB
R-AUDIO 2-L
VIDEO
S-VIDEO
Audio (L) out
Audio (R) out
Audio cable
RGB IN1
RGB IN2
RGB out
AUDIO 1-IN
AUDIO-OUT
RGB OUT
CONTROL
COMPONENT VIDEO
C
R/PR
Y
CB/PB
R-AUDIO 2-L
VIDEO
S-VIDEO
RGB cable
Component video out
CB/PB
CR/PR
Component video cable
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Connecting power supply
►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the power cord's
specified voltage range.
• Never modify the power cord. Never attempt to defeat the ground connection
of the three-pronged plug.
Connector
of the power cord
AC inlet
Connect the connector of the power cord to the AC inlet of the projector.
Firmly plug the power cord's plug into the outlet.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
Remote control
Putting batteries
►Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
•
Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
•
Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.
If you observe a leakage of a battery, wipe out the flower and then replace a battery.
If the liquid adheres to your body or clothes, rinse well with water immediately.
Remove the battery cover.
Slide back and remove the battery cover in the direction of the arrow.
Insert the batteries.
Align and insert the two AA batteries according to their plus and minus
terminals as indicated in the remote control.
Close the battery cover.
Replace the battery cover in the direction of the arrow and snap it back into place.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
Using the remote control
►Be careful in handling the remote control.
• Do not drop or expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects. It may result in
malfunction.
• Remove the batteries from the remote control and store them in a safe place if
you won’t be using the remote control for an extended period.
• Replace the batteries whenever the remote control starts malfunctioning.
• When strong lights (such as direct sunlight) or light from an extremely close
range (such as from an inverter fluorescent lamp), hit the projector’s remote
sensor, the remote control may cause to function. Adjust the direction of the
projector to keep the light from directly hitting the projector’s remote sensor.
The remote control works with the projector’s remote sensor.
approx. 3 meters
30º
30º
• The range of the remote sensor is 3 meters with a 60 degree range (30 degrees
to the left and right of the remote sensor).
• Also a remote signal reflected in the screen etc. may be available. If it is difficult
to send a remote signal to the sensor directly, please try to use the reflected signal.
• Since the remote control uses infrared light to send signals to the projector
(Class1 LED), be sure to use the remote control in an area free from obstacles
that could block the remote control’s output signal to the projector.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Power on/off
Power on/off
►When the power is on, a strong light is emitted. Do not look into
the lens of projector. Also do not peep at the inside of projector through a hole.
SEARCH
AUTO
VIDEO
RGB
ASPECT
BLANK
POWER
indicator
MAGNIFY
VOLUME
MUTE
ON
STANDBY/ON
button
OFF
FREEZE
KEYSTONE
POSITION
MENU
ENTER
ESC
RESET
Power switch
Turning on the power
POWER
Make sure that the power cord is firmly and correctly
(Steady orange)
POWER
connected to the projector and the outlet.
Remove the lens cover, and set the power switch to
the ON position.
(Blinking in green)
The power indicator will light up in steady orange. Then
wait several seconds because the buttons may not
function for these several seconds.
POWER
(Steady green)
Press the STANDBY/ON button on the projector or the remote control.
The projector lamp will light up and the POWER indicator will begin blinking
in green. When the power is completely on, the indicator will stop blinking and
light in green.
To display the picture, select an input signal according to the section "Selecting an
(
17)
input signal"
Turning off the power
Press the STANDBY/ON button on the projector or the
remote control.
The message "Power off?" will appear on the screen for
approximately 5 seconds.
POWER
Press the STANDBY/ON button on the projector or the
remote control again while the message appears.
The projector lamp will go off, and the POWER indicator
will begin blinking in orange.
(Blinking in orange)
POWER
(Steady orange)
Then the POWER indicator will stop blinking and light in
steady orange when the lamp cooling is complete.
Make sure that the power indicator lights in steady orange, and set the power
switch to the OFF position. The POWER indicator will go off. Attach the lens cover.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Operating
Adjusting the volume
SEARCH
AUTO
VIDEO
RGB
Press the VOLUME button on the remote control.
BLANK
ASPECT
A dialog will appear on the screen to aid you in adjusting the
volume.
MAGNIFY
VOLUME
ON
MU
OFF
Use the cursor buttons ▲/▼ to adjust the volume.
To close the dialog and complete the operation, press the VOLUME button
again. Even if you don’t do anything, the dialog will automatically disappear
after a few seconds.
BLANK
ASPECT
AUTO
Temporarily muting the sound
MAGNIFY
VOLUME
MUTE
ON
Press the MUTE button on the remote control.
OFF
A dialog will appear on the screen indicating that you have
muted the sound.
FREEZE
KEYS
To restore the sound, press the MUTE or VOLUME button. Even if you don’t do
anything, the dialog will automatically disappear after a few seconds.
Selecting an input signal
Press the INPUT button on the projector.
Each time you press the button, the projector switches its input
port as below.
Press the RGB button on the remote control to select an input
port for the RGB signal.
Each time you press the button, the projector switches its RGB
input port as below.
SEARCH
AUTO
VIDEO
RGB
BLANK
ASPECT
RGB IN1
RGB IN2
● When the TURN ON is selected to the AUTO SEARCH item in the OPTION
(
36)
menu
, the projector checks the RGB IN1 port first. If no input is detected
at the port, the projector will check the RGB IN2 port.
Press the VIDEO button on the remote control to select an
input for video signal.
Each time you press the button, the projector switches its video
input port as below.
SEARCH
AUTO
VIDEO
RGB
BLANK
ASP
COMPONENT VIDEO
S-VIDEO
VIDEO
● When the TURN ON is selected to the item AUTO SEARCH of OPTION menu
(
36)
, the projector checks the COMPONENT VIDEO port first. If no input is
detected at the port, projector will begin to check other ports in above order.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Searching an input signal
Press the SEARCH button on the remote control.
The projector will start to check its input ports in order to
SEARCH
A
VIDEO
RGB
find any input signals.
BLANK
ASPECT
Then when an input is found, the projector will stop
searching and display the image. If no signal is found,
the projector will return to the state selected before the
operation.
RGB IN 1
RGB IN 2
COMPONENT VIDEO
S-VIDEO
VIDEO
Selecting an aspect ratio
Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect
ratio in turn.
For an RGB signal
NORMAL 4:3
16:9
SEARCH
AUTO
VIDEO
RGB
BLANK
VOLUME
ASPECT
For a video signal/no signal
4:3 16:9 SMALL
MAG
● The NORMAL mode keeps the original aspect ratio of the signal.
● For an HDTV signal of 1125i (1080i) or 750p (720p) as the COMPONENT
VIDEO input, only 16:9 mode can be selected.
● Performing the automatic adjustment initializes the aspect ratio setting.
Adjusting the zoom and focus
Use the zoom knob to adjust the screen size.
Zoom knob
Focus ring
Use the focus ring to focus the picture.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Using the automatic adjustment feature
Press the AUTO button on the remote control.
SEARCH
AUTO
VIDEO
RGB
For an RGB signal
BLANK
VOLUME
ASPECT
The vertical position, the horizontal position, the clock phase
and the horizontal size will be automatically adjusted.
MAGNIFY
ON
And the aspect ratio will be automatically selected. Make sure that the
application window is set to its maximum size prior to attempting to use this
feature. A dark picture may still be incorrectly adjusted. Use a bright picture
when adjusting.
For a video signal or s-video signal
The video format best suited for the respective input signal and the aspect
ratio will be selected automatically.
This function is available only when the AUTO mode is selected to the
(
30)
VIDEO FORMAT item in the INPUT menu
. For a component video
signal, the signal type is identified automatically independently of this
function.
For a video signal, s-video signal or component video signal
The vertical position and horizontal position will be automatically adjusted.
For a component video signal
The aspect ratio will be automatically selected.
The clock phase will be automatically adjusted.
● The automatic adjustment operation requires approximately 10 seconds. Also
please note that it may not function correctly with some input.
Adjusting the position
FREEZE
KEYSTONE
Press the POSITION button on the remote control.
The “POSITION” indication will appear on the screen.
MENU
POSITION
Use the cursor buttons ▲/▼/◄/► to adjust the picture
position.
ENTER
When you want to reset the operation, press the RESET button on the remote
control during the operation.
To complete this operation, press the POSITION button again. Even if you don’t
do anything, the dialog will automatically disappear after a few seconds.
● When this function is performed at a video signal, a certain extra such as a line
may appear outside a picture.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Correcting the keystone distortions
MUTE
Press the KEYSTONE button on the projector or the remote
OFF
control. A dialog will appear on the screen to aid you in
correcting the distortion.
FREEZE
KEYSTONE
Use the cursor buttons ▲/▼ to correct the distortion.
To close the dialog and complete this operation, press the
KEYSTONE button again. Even if you don’t do anything, the
dialog will automatically disappear after a few seconds.
● The adjustable range for correction will vary among inputs. For
some input, this function may not work well.
● When V:INVERT or H&V:INVERT is selected to the MIRROR
item in the SETUP menu, if the projector screen is inclined or
angled downward, this function may not work correctly.
● When the zoom adjustment is set to the TELE (telephoto focus), this correction
may be excessive. This function should be used when the zoom adjustment is
set to the WIDE (wide-angle focus) whenever possible.
Using the magnify feature
SEARCH
AUTO
VIDEO
RGB
Press the ON button of MAGNIFY on the remote control.
The “MAGNIFY” indication will appear on the screen
BLANK
ASPECT
MAGNIFY
(although the indication will disappear in several seconds with
no operation), and the projector will enter the MAGNIFY mode.
VOLUME
MUTE
ON
F
Use the cursor buttons ▲/▼ to adjust the zoom level.
To move the zoom area, press the POSITION button in the MAGNIFY mode,
then use the cursor buttons ▲/▼/◄/► to move the area. And to finalize the
zoom area, press the POSITION button again.
To exit the MAGNIFY mode and restore the screen to normal, press the OFF
button of MAGNIFY on the remote control.
● The projector automatically exits the MAGNIFY mode when the input signal is
changed, or when the display condition is changed.
● Although in the MAGNIFY mode, the keystone distortion condition may vary, it
will be restored when the projector exits the MAGNIFY mode.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Freezing the screen
MAGNIFY
VOLUME
ON
Press the FREEZE button on the remote control.
MUTE
The “FREEZE” indication will appear on the screen, and the
projector will enter the FREEZE mode.
OFF
FREEZE
KEYSTONE
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
● The projector automatically exits the FREEZE mode when the input signal
changes, or when one of the projector’s buttons or the remote control buttons
except buttons of MAGNIFY, FREEZE, ESC and RESET is pressed.
● If the projector continues projecting a still image for long time, the LCD panel
might possibly be printed. Do not leave the projector in the FREEZE mode for
too long.
Temporarily blanking the screen
Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen of
input signal. Please refer to the BLANK item in the SCREEN
SEARCH
AUTO
VIDEO
RGB
BLANK
VOLU
ASPECT
MAGNIFY
ON
(
33).
menu
To exit the blank screen and return to the input signal screen, press the
BLANK button again.
● The projector automatically returns to the input signal screen when the input
signal is changed, or when one of the projector’s buttons or the remote control
buttons is pressed.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Multifunctional settings
Using the menu function
This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN,
OPTION, and EASY MENU. Each of these menus is operated using the same methods.
The basic operations of these menus are as follows.
VIDEO
RGB
SEARCH
ENTER button
Cursor buttons
MENU button
RESET button
ASPECT
AUTO
BLANK
MAGNIFY
VOLUME
MUTE
POSITION
MENU
ON
OFF
FREEZE
KEYSTONE
ENTER
POSITION
MENU
ESC
RESET
ENTER
ESC
RESET
Press the MENU button on the remote control or one of
the cursor buttons on the projector.
The Advanced MENU or EASY MENU will appear.
ꢀMENUꢀ[RGB]
ꢀꢀꢀ:SELECT
ꢀPICTURE
ꢀIMAGE
ꢀINPUT
ꢀBRIGHTNESSꢀꢀꢀꢀꢀ＋0
ꢀCONTRASTꢀꢀꢀꢀꢀꢀꢀ＋0
ꢀGAMMAꢀꢀꢀꢀꢀꢀꢀꢀDEFAULTꢀ1
ꢀCOLORꢀTEMPꢀꢀꢀ6500K
ꢀCOLORꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ+0
ꢀTINTꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ+0
ꢀSHARPNESSꢀꢀꢀꢀꢀꢀꢀ+0
ꢀPROGRESSIVEꢀꢀTURNꢀOFF
ꢀMYꢀMEMORYꢀꢀꢀꢀSAVEꢀ1
ꢀSETUP
ꢀSCREEN
ꢀOPTION
ꢀEASYꢀMENU
In the EASY MENU
If you want to change it to the Advanced MENU, select the
"Go to Advanced Menu".
ꢀEASYꢀMENU
ꢀASPECTꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ4:3
ꢀMODEꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀNORMAL
ꢀBRIGHTNESS
Use the cursor buttons ▲/▼ to select an item to operate.
+0
+0
+0
+0
+3
ꢀCONTRAST
ꢀCOLOR
Use the cursor buttons◄/► to operate the item.
ꢀTINT
ꢀSHARPNESS
In the Advanced MENU
ꢀWHISPERꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀNORMAL
ꢀMIRRORꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀNORMAL
ꢀRESETꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
ꢀFILTERꢀTIMEꢀꢀꢀꢀꢀꢀꢀꢀꢀ0
Use the cursor buttons ▲/▼ to select a menu.
If you want to change it to the EASY MENU, select the
ꢀLANGUAGEꢀꢀꢀꢀꢀꢀꢀꢀꢀENGLISH
ꢀGoꢀToꢀAdvanceꢀMenu...
EASY MENU.
Then press the cursor button ► on the projector or remote
control, or the ENTER button on the remote control to select an item. The
display of the selected menu will be active.
Use the cursor buttons ▲/▼ to select an item to operate.
Then press the cursor button
►
on the projector or remote control, or the ENTER button
on the remote control to progress. The operation menu of the selected item will appear.
Use the cursor buttons▲/▼ to operate the item.
●
When you want to reset the operation, press the RESET button on the remote
control during the operation. Note that items whose functions are performed
simultaneously with operation (ex. LANGUAGE, H PHASE etc.) cannot be reset.
●
In the advanced menu, when you want to return to the previous display, press the cursor
◄
on the projector or remote control, or the ESC button on the remote control.
Press the MENU button on the remote control again to close the menu
and complete this operation. Even if you don't do anything, the dialog will
automatically disappear after about 10 seconds.
● Some functions cannot be performed when a certain input port is selected, or
when a certain input signal is displayed.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
ꢀEASYꢀMENU
EASY Menu
ꢀASPECTꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ4:3
ꢀMODEꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀNORMAL
ꢀBRIGHTNESS
+0
+0
+0
+0
+3
With the EASY MENU, items shown in the table below can
be performed.
ꢀCONTRAST
ꢀCOLOR
ꢀTINT
ꢀSHARPNESS
Select an item using the cursor buttons ▲/▼ on the
projector or remote control. Then perform it referring to the
following table.
ꢀWHISPERꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀNORMAL
ꢀMIRRORꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀNORMAL
ꢀRESETꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
ꢀFILTERꢀTIMEꢀꢀꢀꢀꢀꢀꢀꢀꢀ0
ꢀLANGUAGEꢀꢀꢀꢀꢀꢀꢀꢀꢀENGLISH
ꢀGoꢀToꢀAdvanceꢀMenu...
Item
Description
Using the buttons ◄/► switches the mode for aspect ratio.
ASPECT
See the ASPECT item in the IMAGE menu ( 28)
Using the buttons ◄/► switches the mode of picture type. The
modes of picture type are combinations of a mode of GAMMA and
a mode of COLOR TEMP Choose a suitable mode according to the
projected source.
NORMAL
CINEMA
DYNAMIC
NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)
CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)
DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)
MODE
• When the combination of GAMMA and COLOR TEMP differs from
pre-assigned modes above, the display on the menu for the MODE
is “CUSTOM”. Please refer to the GAMMA ( 25) and COLOR
TEMP ( 26) items in the PICTURE menu.
• When this function is performed, a certain extra such as a line
may appear
Using the buttons ◄/► adjusts the brightness.
See the item BRIGHTNESS in the PICTURE menu ( 25).
BRIGHTNESS
CONTRAST
COLOR
Using the buttons ◄/► adjusts the contrast.
See the item CONTRAST of section PICTURE menu
(
25).
Using the buttons ◄/► adjusts the strength of whole color.
See the COLOR item in the PICTURE menu ( 26).
Using the buttons ◄/► adjusts the tint.
See the TINT item in the PICTURE menu ( 26).
TINT
Using the buttons ◄/► adjusts the sharpness.
See the SHARPNESS item in the PICTURE menu
SHRPNESS
WHISPER
(
26).
Using the buttons ◄/► turns off/on the whisper mode.
See the WHISPER item in the SETUP menu ( 32)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
EASY Menu (continued)
Item
Description
Using the buttons ◄/► switches the mode for mirror status.
MIRROR
See the MIRROR item in the SETUP menu ( 32).
Performing this item resets all of the items of EASY MENU except
FILTER TIME and LANGUAGE.
A dialog is displayed for confirmation. Selecting RESET using the
button ▲ performs resetting.
RESET
Performing this item resets the filter timer which counts usage time
of the air filter.
A dialog is displayed for confirmation. Selecting RESET using the
button ▲ performs resetting.
FILTER TIME
See the FILTER TIME item in the OPTION menu ( 36).
Select the LANGUAGE item to toggle the menu language. Refer to
LANGUAGE
Go To
description of LANGUAGE in the SCREEN menu ( 33)
Select “Go To Advanced Menu” to use the menu of PICTURE,
Advanced Menu IMAGE, INPUT, SETUP, SCREEN or OPTION.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
PICTURE Menu
ꢀMENUꢀ[RGB]
ꢀꢀꢀ:SELECT
ꢀBRIGHTNESSꢀꢀꢀꢀꢀ＋0
With the PICTURE menu, the items shown in the table
below can be performed.
ꢀPICTURE
ꢀIMAGE
ꢀINPUT
ꢀCONTRASTꢀꢀꢀꢀꢀꢀꢀ＋0
ꢀGAMMAꢀꢀꢀꢀꢀꢀꢀꢀDEFAULTꢀ1
ꢀCOLORꢀTEMPꢀꢀꢀ6500K
ꢀCOLORꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ+0
ꢀTINTꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ+0
ꢀSHARPNESSꢀꢀꢀꢀꢀꢀꢀ+0
ꢀPROGRESSIVEꢀꢀTURNꢀOFF
ꢀMYꢀMEMORYꢀꢀꢀꢀSAVEꢀ1
ꢀSETUP
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
ꢀSCREEN
ꢀOPTION
ꢀEASYꢀMENU
Item
Description
BRIGHTNESS
CONTRAST
Using the buttons ▲/▼ adjusts the brightness. : Light
Using the buttons ▲/▼ adjusts the contrast. : Strong
Using the buttons ▲/▼ switches the GAMMA mode.
Dark
Weak
#1 DEFAULT
#1 CUSTOM
#2 DEFAULT
#3 CUSTOM
#3 DEFAULT
#2 CUSTOM
To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM
Selecting a mode of CUSTOM and then
pressing the button ► or the ENTER button
ENTER :
1
2
3
4
5
6
7
8
displays a dialog to aid you in adjusting the
mode.
This function is useful when you want to
change the brightness of particular tones
+0 +0 +0 +0 +0 +0 +0 +0
[
]
GAMMA CUSTOM 1
Choose an item using the buttons ◄/►, and
adjust the level using the buttons ▲/▼.
GAMMA
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button
Each time you press the ENTER button, the pattern changes as
below.
No pattern Gray scale of 9 steps
Ramp Gray scale of 15 steps
The eight equalizing bars correspond to eight tone levels of the
test pattern except the darkest in the left end. If you want to adjust
the 2nd tone from left end on the test pattern, use the equalizing
adjustment bar “1”. The darkest tone at the left end of the test
pattern cannot be controlled with any of equalizing adjustment bar.
• When this function is performed, a certain extra such as a line
may appear
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
PICTURE Menu (continued)
Item
Description
Using the buttons ▲/▼ switches the mode of color temperature
HIGH MIDDLE LOW CUSTOM
To adjust CUSTOM
ENTER
:
Selecting the CUSTOM and then pressing the
button ► or the ENTER button displays a dialog
to aid you in adjusting the OFFSET and/or GAIN
of the CUSTOM mode.
OFFSET
G
GAIN
G
R
B
R
B
OFFSET adjustments change the color intensity
on the whole tones of the test pattern.
+0 +0 +0
+0 +0 +0
COLOR TEMP
GAIN adjustments mainly affect color intensity
on the brighter tones of the test pattern.
COLOR TEMP
Choose an item using the buttons ◄/►, and adjust the level using
the buttons ▲/▼.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern Gray scale of 9 steps
Ramp Gray scale of 15 steps
• When this function is performed, a certain extra such as a line
may appear
Using the buttons ▲/▼ adjusts the strength of whole color.
COLOR
Strong
Weak
• This item can be selected only for a video signal
Using the buttons ▲/▼ adjusts the tint.
TINT
Green
Red
• This item can be selected only for a video signal
Using the buttons ▲/▼ adjusts the sharpness
SHARPNESS
Strong
Weak
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
PICTURE Menu (continued)
Item
Description
Using the buttons ▲/▼ switches the progress mode.
TV FILM TURN OFF
• This function is performed only for an interlaced signal of a VIDEO
input, an S-VIDEO input or CONPONENT VODEO input of 525i
(480i) or 625i (576i) signal.
PROGRESSIVE
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select TURN OFF,
even though the screen image may lose the sharpness.
Selecting a mode of MY MEMORY using the buttons ▲/▼ and then
pressing the button ► or the ENTER button performs each function.
LOAD1
LOAD2
LOAD3
LOAD4
SAVE4 SAVE3
SAVE2
SAVE1
This projector has 4 numbered memories for adjustment data.
Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on
the memory whose number corresponds to the command’s number,
and adjusts the picture automatically depending on the data.
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 saves the current
adjustment data on the memory whose number corresponds to the
command’s number.
MY MEMORY
• The current adjustment data of the items in the PICTURE menu is
stored, except for the adjustment data in the CUSTOM modes for
the GAMMA and COLOR TEMP items.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
IMAGE Menu
ꢀMENUꢀ[RGB]
ꢀꢀꢀ:SELECT
ꢀASPECTꢀꢀꢀꢀꢀꢀꢀꢀꢀ4:3
With the IMAGE menu, items shown in the table below can
be performed.
ꢀPICTURE
ꢀIMAGE
ꢀOVERꢀSCANꢀꢀꢀꢀꢀꢀ5
ꢀVꢀPOSITIONꢀꢀꢀꢀꢀ25
ꢀHꢀPOSITIONꢀꢀꢀꢀꢀ142
ꢀHꢀPHASEꢀꢀꢀꢀꢀꢀꢀꢀ16
ꢀHꢀSIZEꢀꢀꢀꢀꢀꢀꢀꢀꢀ1344
ꢀAUTOꢀADJUSTꢀEXECUTE
ꢀINPUT
ꢀSETUP
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
ꢀSCREEN
ꢀOPTION
ꢀEASYꢀMENU
Item
Description
Using the buttons ▲/▼ switches the mode for aspect ratio
For an RGB signal
4:3
16:9 NORMAL
For a video signal / no signal
4:3 16:9 SMALL
ASPECT
• The NORMAL mode keeps the original aspect ratio of the signal.
• For an HDTV signal of 1125i (1080i) or 750p (720p) as the
COMPONENT VIDEO input, this item can't be selected.
• Performing the automatic adjustment initializes the aspect ratio
setting.
Using the buttons ▲/▼ adjusts the over-scan ratio
Large (It reduces picture)
Small (It magnifies picture)
OVER SCAN
• This item can be selected only for a video signal
• When this adjustment is too large, certain degradation may appear
at the frame area of the picture. In such a case, please adjust small.
Using the buttons ▲/▼ adjusts the vertical position.
V POSITION
H POSITION
Up
Down
Using the buttons ▲/▼ adjusts the horizontal position.
Left Right
Using the buttons ▲/▼ adjusts the horizontal phase to eliminate
flicker.
Right
Left
H PHASE
• This item can be selected only for an RGB signal or a component
video signal. Note that this does not work with the input signal of
525i(480i)/625i(576i) from the component video port
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
IMAGE Menu (continued)
Item
Description
Using the buttons ▲/▼ adjusts the horizontal size.
Large Small
• This item can be selected only for an RGB signal
H SIZE
• When this adjustment is excessive, the picture may not be
displayed correctly. In such a case, please reset the adjustment
by pressing the RESET button on the remote control during this
operation.
Selecting this item performs the automatic adjustment feature.
For an RGB signal
The vertical position, the horizontal position, the clock phase and
the horizontal size will be automatically adjusted. And the aspect
ratio will be automatically selected.
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
For a video signal or s-video signal
The video format best suited for the respective input signal will be
selected automatically.
This function is available only when the AUTO mode is selected to
the VIDEO FORMAT item in the INPUT menu. For a component
video signal, the signal type is identified automatically independently
of this function.
AUTO ADJUST
EXECUTE
For a video signal, s-video signal or component video signal
The vertical position and horizontal position will be automatically
adjusted.
For a component video signal
The aspect ratio will be automatically selected.
The clock phase will be automatically adjusted.
• The automatic adjustment operation requires approximately 10
seconds. Also please note that it may not function correctly with
some input.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
INPUT Menu
ꢀMENUꢀ[RGB]
ꢀꢀꢀ:SELECT
ꢀCOLORꢀSPACEꢀꢀAUTO
ꢀCOMPONENTꢀꢀꢀꢀCOMPONENT
ꢀVIDEOꢀFORMATꢀAUTO
ꢀINFORMATION
With the INPUT menu, the items shown in the table below
can be performed.
ꢀPICTURE
ꢀIMAGE
ꢀINPUT
ꢀSETUP
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
ꢀSCREEN
ꢀOPTION
ꢀEASYꢀMENU
Item
Description
Using the buttons ▲/▼ switches the mode for color space
AUTO RGB SMPTE240 REC709 REC601
• This item can be selected only for an RGB signal or a component
COLOR SPACE video signal (except signals of 525i(480i)/625i(576i) from the
component video port)
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
Using the buttons ▲/▼ switches the function of COMPONENT
VIDEO port
COMPONENT
SCART RGB
COMPONENT
When the SCART RGB is selected, the COMPONENT VIDEO port
function as a port for a SCART RGB signal input. A SCART adapter
and SCART cable realize a SCART RGB input to the projector. For
details, contact your dealer.
Using the buttons ▲/▼ switches the mode for video format
AUTO
NTSC
PAL SECAM
N-PAL
M-PAL NTSC4.43
• This item is performed only for a video signal from the VIDEO port
or the S-VIDEO port. For a component video signal, the signal type
is identified automatically independently of this function.
VIDEO FORMAT
• The AUTO mode automatically selects the optimum mode
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (ex. an irregular picture, a color lack),
please select the mode depending on the input signal.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
INPUT Menu (continued)
Item
Description
Selecting this item displays a dialog titled “INPUT INFORMATION”.
It shows the information about the current input.
INPUT-INFORMATION
RGB
1024x768 @60.0
FRAME LOCK
INPUT-INFORMATION
S-VIDEO
INPUT-INFORMATION
COMPONENT
576i @50
SECAM
AUTO
SCART RGB
• The “FRAME LOCK” message on the dialog means the frame lock
function is working This function automatically works when a RGB
signal with vertical frequency of 50 to 60 Hz is input, and it displays
a moving picture more smoothly.
INFORMATION
• The “SCART RGB” message means the COMPONENT VIDEO
port is working as a SCART RGB input port. Please refer to the
COMPONENT item in this menu. ( 30)
• This item can't be selected for no signal and sync out.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
SETUP Menu
ꢀMENUꢀ[RGB]
ꢀꢀꢀ:SELECT
ꢀWHISPERꢀꢀꢀꢀꢀꢀNORMAL
With the SETUP menu, the items shown in the table below
can be performed.
ꢀPICTURE
ꢀIMAGE
ꢀINPUT
ꢀMIRRORꢀꢀꢀꢀꢀꢀꢀNORMAL
ꢀVOLUMEꢀꢀꢀꢀꢀꢀꢀ16
ꢀAUDIOꢀ
ꢀSETUP
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
ꢀSCREEN
ꢀOPTION
ꢀEASYꢀMENU
Item
Description
Using the buttons ▲/▼ turns off/on the whisper mode
NORMAL WHISPER
WHISPER
• When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
Using the buttons ▲/▼ switches the mode for mirror status
MIRROR
VOLUME
NORMAL
H:INVERT
V:INVERT H&V:INVERT
Using the buttons ▲/▼ adjusts the volume.
High Low
ꢀAUDIO
Choose an input port using the buttons ▲/▼
(1), then select the audio port to be interlocked
with the input port using the buttons ◄/► (2).
When off is selected, both of two audio ports
do not work for the input port.
ꢀꢀꢀQUIT
ꢀꢀ
ꢀRGB1
1ꢀꢀꢀ2
ꢀRGB2
ꢀCOMPONENT
ꢀS‑VIDEO
ꢀVIDEO
AUDIO
(1) RGB1
RGB2
COMPONENT
S-VIDEO
VIDEO
(2) 1
2
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
SCREEN Menu
ꢀMENUꢀ[RGB]
ꢀꢀꢀ:SELECT
With the SCREEN menu, the items shown in the table
below can be performed.
ꢀPICTURE
ꢀIMAGE
ꢀINPUT
ꢀSETUP
ꢀLANGUAGEꢀꢀꢀꢀꢀꢀENGLISH
ꢀMENUꢀPOSITION
ꢀOSDꢀBRIGHT.ꢀꢀꢀ5
ꢀBLANKꢀꢀꢀꢀꢀꢀꢀꢀꢀBLACK
ꢀSTARTꢀUPꢀꢀꢀꢀꢀꢀORIGINAL
ꢀMyScreen
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
ꢀSCREEN
ꢀOPTION
ꢀEASYꢀMENU
ꢀMyScreenꢀLockꢀTURNꢀOFF
ꢀMESSAGEꢀꢀꢀꢀꢀꢀꢀTURNꢀON
Item
Description
Using the buttons ▲/▼ switches the OSD (On Screen Display)
language
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO
NORSK NEDERLANDS PORTUGUÊS 日本語
LANGUAGE
SVENSKA
SUOMI POLSKI TÜRKÇE
Using the buttons ◄/►/▲/▼ adjusts the menu position
MENU POSITION To quit the operation, press the MENU button on the remote control
or keep no operation for 10 seconds.
Using the buttons ▲/▼ switches the brightness level of the OSD (On
Screen Display)
OSD BRIGHT.
BRIGHT DARK
Using the buttons ▲/▼ switches the mode for the blank screen
The blank screen is a screen for the temporarily blanking feature
(
21) It is displayed by pressing the BLANK button on the remote
control
MyScreen
ORIGINAL
BLUE
WHITE
BLACK
BLANK
MyScreen is a screen you can register as a desired screen. The
ORIGINAL screen is the existing standard screen. BLUE, WHITE
and BLACK are non-patterned (plain) screens in each color.
To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLACK screen after several
minutes.
• For the MyScreen, please refer to the MyScreen item ( 34).
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
SCREEN Menu (continued)
Item
Description
Using the buttons ▲/▼ switches the mode for the start-up screen
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen
ORIGINAL
TURN OFF
MyScreen is a screen you can register as a desired screen.The
ORIGINAL screen is the existing standard screen. When TURN
OFF is selected, the BLACK screen is used.
START UP
To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLANK screen after several
minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it
will change to the BLACK screen.
• For the MyScreen, please refer to the item MyScreen
For
below
the BLANK screen, please refer to the BLANK item ( 33)
This item functions for capturing the MyScreen of the blank screen
and the start-up screen. Please execute displaying the input
including the picture you want to capture.
1. Selecting this item displays a dialog titled “MyScreen”. It will ask
you if you start capturing the picture from the current screen.
Please wait for the target picture to be displayed, and press
the ENTER button on the remote control when the picture is
displayed. The picture will freeze and the frame for capturing
appears.
To stop performing, press the RESET or ESC button on the
remote control.
MyScreen
2. Using the buttons ◄/►/▲/▼ adjusts the frame position. Please
move the frame to the position of the picture which you want to
use.
To start registration, press the ENTER button on the remote
control.
To restore the screen and return to the previous dialog, press the
RESET or ESC button on the remote control.
Registration takes several minutes. When the registration is
completed, the registered screen and the message “MyScreen
registration is finished.” are displayed for several seconds. If the
registration failed, the message “A capturing error has occurred.
Please try again.” is displayed.
Using the buttons ▲/▼ turns on/off the MyScreen lock function
TURN ON
TURN OFF
MyScreen Lock
When the TURN ON is selected, the item MyScreen is locked. Use
this function for protecting the current MyScreen.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
SCREEN Menu (continued)
Item
Description
Using the buttons ▲/▼ turns on/off the message function
TURN ON TURN OFF
When the TURN ON is selected, the following message function
works.
“AUTO IN PROGRESS” while automatically adjusting
”NO INPUT IS DETECTED”
”SYNC IS OUT OF RANGE”
MESSAGE
"Searching….” while searching for the input
”Detecting….” while an input signal is detected
The indication of the input signal displayed by changing
The indication of the aspect ration displayed by changing
The indication of "FREEZE" and "II" while freezing the screen by
pressing the FREEZE button.
• When the TURN OFF is selected, please remember if the picture
is freezing. Do not mistake freezing for a malfurction ( 21)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
OPTION Menu
ꢀMENUꢀ[RGB]
ꢀꢀꢀ:SELECT
With the OPTION menu, the items shown in the table below can
be performed.
Select an item using the cursor buttons ▲/▼ on the projector or
remote control, and press the cursor button ► on the projector
or remote control, or the ENTER button on the remote control to
execute the item, except for the items LAMP TIME and FILTER
TIME. Then perform it referring to the following table.
ꢀPICTURE
ꢀIMAGE
ꢀINPUT
ꢀAUTOꢀSEARCHꢀꢀTURNꢀOFF
ꢀAUTOꢀOFFꢀꢀꢀꢀꢀꢀ0
ꢀLAMPꢀTIMEꢀꢀꢀꢀꢀ0
ꢀFILTERꢀTIMEꢀꢀꢀ0
ꢀSERVICE
ꢀSETUP
ꢀSCREEN
ꢀOPTION
ꢀEASYꢀMENU
Item
Description
Using the buttons ▲/▼ turns on/off the automatic signal search function
TURN ON TURN OFF
This function works with INPUT, RGB, and VIDEO buttons.
When the TURN ON is selected, detecting no signal automatically
cycles through input ports in the following order. The search is
started from the current port. Then when an input is found, the
projector will stop searching and display the image
AUTO SEARCH
Using the buttons ▲/▼ adjusts the time to count down to
automatically turn the projector off
Long (max. 99 minutes)
Short (min. 0 minute = DISABLE)
AUTO OFF
ENABLE
AUTO OFF
DISABLE
1
0
AUTO OFF
When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector
lamp will go off and the power indicator begins blinking. Please
refer to the section “Turning off the power” ( 16)
The lamp time is the time counted after the last resetting. It is
shown in the OPTION menu as the usage time of the lamp.
Pressing the RESET button on the remote control or the button ►
of the projector displays a dialog To reset the lamp time select the
RESET using the button ▲.
LAMP TIME
RESET CANCEL
• Please reset the lamp time only when you have replaced the lamp
for a corresponding message about the lamp
• For the lamp replacement, see the section "Lamp" ( 38, 39)
The filter time is the time counted after the last resetting. It is shown
in the OPTION menu as the usage time of the air filter
Pressing the RESET button on the remote control or the button ►
of the projector displays a dialog. To reset the filter time, select the
RESET using the button ▲.
FILTER TIME
RESET CANCEL
Please reset the filter time only when you have cleaned or replaced
the air filter, for a corresponding message about the air filter
• For the air filter cleaning see the section "Air filter" ( 40)
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional settings
OPTION Menu (continued)
Item
Description
Selecting this item displays the SERVICE menu
Select an item using the buttons ▲/▼, and press the button ► or
the ENTER button on the remote control to execute the item
FAN SPEED
Using the buttons ▲/▼ switches the rotation speed of the cooling
fans. The HIGH is the mode for use at highlands etc. Note that the
projector is noisier when the HIGH is selected.
HIGH
NORMAL
AUTO ADJUST
Using the buttons ▲/▼ enables/disables the automatic adjustment
When DISABLE is selected, the automatic adjustment feature is
disabled, although rough adjustment is automatically performed
depending on the basic setting.
ENABLE
DISABLE
Depending on conditions, such as input image, signal cable to the
projector, environment around the projector, etc., the automatic adjustment
may not work correctly. In such a case, please choose DISABLE to
disable the automatic adjustment, and make adjustment manually.
GHOST
1. Select a color element of ghost using the buttons ◄/►
2. Adjust the selected element using the buttons ▲/▼ to disappear ghost.
KEY LOCK
Using the buttons ▲/▼ turns on/off the key lock feature. When TURN ON is
selected, the buttons on the projector except the STANDBY/ON button are locked.
SERVICE
TURN ON
TURN OFF
• Please use to avoid a mischief and touching accidentally. This
function does not have any effect on the remote control.
FILTER MESSAGE
Use the ▲/▼ button to set the timer for the interval to show the
message for cleaning up the air filter.
100h
200h
300h
TURN OFF
50h
After selecting “50h”, 100h”, “200h”, or “300” , the message “CLEAN
THE AIR FILTER” will appear after the timer reaches the interval
time set by the menu. Please refer to the “FILTER TIME” item (
36) and the table “Related message” ( 42)
When the “TURN OFF” is chosen, the air-filter cleaning message will not appear.
• Please check and clean the air filter periodically, even if there is
no message. If the air filter becomes blocked by dust or others, the
internal temperature will rise, which could cause malfunction, or
reduce the lifetime of the projector.
It is recommended to choose “100h” in general. Please be careful
with the operating environment of the projector and the condition of air
filter, especially when the “200h”, “300h” or “TURN OFF” is chosen.
FACTORY RESET
Selecting RESET using the button ▲ performs this function. By this function
that the items LAMP TIME, FILTER TIME and LANGUAGE are not reset.
RESET CANCEL
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Maintenance
Lamp
HIGH VOLTAGE
HIGH TEMPERATURE
HIGH PRESSURE
►The projector uses a high-pressure mercury glass lamp. The lamp can break
with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn
over time. Note that each lamp has a different lifetime, and some may burst or
burn out soon after you start using them. In addition, when the bulb bursts, it is
possible for shards of glass to fly into the lamp housing, and for gas containing
mercury to escape from the projector’s vent holes.
►About disposal of a lamp • This product contains a mercury lamp; do not
put it in a trash. Dispose of it in accordance with environmental laws.
For more information, call your dealer.
• If the lamp should break (it will make a loud bang when it does), unplug
the power cord from the outlet, and make sure to request a replacement
lamp from your local dealer. Note that shards of glass could damage the
inside of the projector, or cause injury during handling, so please do not
try to clean the projector or replace the lamp yourself.
Disconnect
the plug
from the
power
• If the lamp should break (it will make a loud bang when it does),
ventilate the room well, and make sure not to breathe the gas that
comes out of the projector vents, or get it in your eyes or mouth.
• Before replacing the lamp, turn the projector off and unplug the power
outlet
cord, then wait at least 45 minutes for the lamp to cool sufficiently.
Handling the lamp while hot can cause burns, as well as damaging the
lamp.
• Never unscrew except the appointed (marked by an arrow) screws.
• Do not open the lamp cover while the projector is suspended from
the ceiling. This is dangerous, since if the lamp’s bulb has broken, the
shards will fall out when the cover is opened. In addition, working in
high places is dangerous, so ask your local dealer to have the lamp
replaced even if the bulb is not broken.
• Do not use the projector with the lamp cover removed. To replace the
lamp, make sure that the screws are tightened firmly. Loose screws
could result in damage or injury.
• Use only the lamp of the specified type.
• If the lamp breaks soon after the first time it is used, it is possible
that there are electrical problems elsewhere besides the lamp. If this
happens, contact your local dealer or a service representative.
•
Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
• If the indicators or a message prompt you to replace the lamp (see
the section "Related Messages" and "Regarding the indicator Lamps"),
replace the lamp as soon as possible. Using the lamp for long periods
of time, or passing the replacement date, could cause it to burst. Do not
use old (used) lamps; this is a cause of breakage.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Lamp (continued)
When the indicators or a message prompt you to replace the lamp, replace the
lamp as soon as possible.
Turn the projector off, and unplug the power cord. Allow the lamp to cool for
at least 45 minutes.
To prepare a new lamp, contact your dealer and tell the lamp type number
456-8915. If the projector is mounted on the ceiling, or if the lamp has
broken, also ask the dealer to replace the lamp
Lamp cover
In the case of replacement by yourself,
After making sure that the projector has
cooled adequately, slowly turn over the
projector, so that the bottom is facing up.
Claws
Please unhook the claws of the lamp cover
and remove the lamp cover.
Loosen the 2 screws (marked by arrow) of
the lamp, and slowly pick up the lamp by the
handles.
Insert the new lamp, and retighten firmly the
Screws marked
by arrow
two screws that are loosened in the previous
process to lock it in place.
While interlocking the 2 tabs of the lamp
cover to the projector, position the lamp cover
on the projector. Then push the center point of
the two claws to fix the lamp cover.
Tabs
Slowly turn the projector so that the top is
facing up.
Center point
of claws
Turn the projector on, and reset the lamp
time using the LAMP TIME function in the
(
36)
OPTION menu
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
►Before caring, make sure the power switch is off and the
power cable is not plugged in, then allow the projector to cool sufficiently The
care in a high temperature state of the projector could cause a burn and/or
malfunction to the projector
►Use only the air filter of the specified type. Do not use the projector with the
air filter and the filter cover removed.
►Avoid wetting the projector or inserting liquids in the projector. It could result
in a fire, an electric shock, and/or malfunction to the projector
►Please replace the air filter when it is damaged or too soiled,
and also when you replace the lamp.
When the indicators or a message prompts you to clean the air filter, clean the air filter
as soon as possible. Please check and clean the air filter periodically, even if there is no
message. If the air filter becomes clogged by dust or the like, internal temperatures rise
and the power may be automatically turned off for malfunction prevention.
Turn the projector off, and unplug the power cord.
Allow the projector to cool for at least 45 minutes. And
prepare a vacuum cleaner.
Filter cover’s claws
After making sure that the projector is cool adequately,
slowly turn the projector so that the lens-side is facing
up. Please be careful for the projector not to fall. While
the projector is placed lens-side up, hold the projector.
Unhooking the filter cover’s claws, and pull the filter
cover in the direction of the arrow to remove it.
Filter cover
Air filter’s knob
Hold the air filter’s knob, and pull the air filter off.
Apply a vacuum cleaner to the vent of the projector for the
air filter. And then slowly turn the projector bottom up.
Apply a vacuum cleaner to the air filter and the filter cover.
Please replace the air filter when it is damaged or too soiled.
To prepare a new air filter, contact your dealer and tell the air
filter type number =
Air filter
An air filter of specified type will come even with a replacement lamp for this projector.
Position the cleaned air filter or a new air filter into place, and push the
"PUSH" mark with claws to fix the air filter.
Replace the filter cover and snap it back into place.
Slowly turn the projector so that the top is facing up.
Turn the projector on, and reset the filter time using the FILTER TIME
(
36)
function of the OPTION menu
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
►Before caring, make sure the power switch is off and the
power cable is not plugged in, and then allow the projector to cool sufficiently.
The care in a high temperature state of the projector could cause a burn and/or
malfunction to the projector.
►Never try to care for the inside of the projector personally. Doing is so
dangerous.
►Avoid wetting the projector or inserting liquids in the projector. It could result
in a fire, an electric shock, and/or malfunction to the projector.
• Do not put a container containing water, cleaner or chemicals near the
projector.
• Do not use aerosols or sprays.
►Please take right care of the projector according to the
following. Incorrect care could cause not only an injury but adverse influence
such as discoloration, peeling paint, etc.
►Do not use cleaner or chemicals other than those listed below.
►Do not polish or wipe with hard objects.
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and
inspected by your dealer about once every year.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display
quality. Please take care of the lens, being cautious of handling.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufficiently.
After making sure that the projector is cool adequately, lightly wipe the lens
with a commercially available lens-cleaning wipe. Do not touch the lens
directly with your hand.
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint,
etc.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufficiently.
After making sure that the projector is cool adequately, lightly wipe with gauze
or a soft cloth.
If soiling is severe, dip soft cloth in water or a neutral cleaner diluted in water,
and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting
Related messages
When the unit's power is on, messages such as those shown below may be
displayed. When any such message is displayed on the screen, please follow the
instructions described below. If the same message is displayed after the remedy,
or if a message other than the following appears, please contact your dealer or
service company.
Although these messages will be automatically disappeared around several
minutes, it will be reappeared every time the power is turned on.
Message
Description
The time the lamp timer has counted is approaching
2000 hours.
CHANGE THE LAMP.
Preparation of a new lamp and an early lamp change are
recommended. After you have changed the lamp, please be
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
sure to reset the lamp timer( 36)
The time the lamp timer has counted is approaching
2000 hours, so a lamp change within ** hours is
recommended.
When lamp usage reaches 2000 hours, the power will
automatically be turned off. Please change the lamp by
referring to the section “Lamp”. After you have changed the
CHANGE THE LAMP.
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
THE POWER WILL BE
TURNED OFF ** hrs later.
lamp, please be sure to reset the lamp timer( 36)
CHANGE THE LAMP.
As the time the lamp timer has counted has reached
2000 hours, the power will soon be automatically
turned off.
Please immediately turn the power off, and change the lamp
by referring to the section “Lamp”. After changing the lamp,
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
THE POWER WILL BE
TURNED OFF 0 hrs later.
please be sure to reset the lamp timer( 36)
There is no input signal.
Please confirm the signal input connection, and the status
of the signal source.
The horizontal or vertical wavelength of the input signal
is out of the response parameter range of this unit.
Please confirm the specs for your projector or the signal
source specs.
fH *****kHz fV
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Related messages (continued)
Message
Description
The internal temperature is rising.
Please turn the power off, and allow the projector to cool
down at least 20 minutes. After having confirmed the
following items, please turn the power ON again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
CHECK THE AIR FLOW
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy, please
set FAN SPEED of the SERVICE item in the OPTION menu
to HIGH.
REMINDER
*** HRS PASSED AFTER THE
LAST FILTER CHECK.
FILTER MAINTENANCE IS ESSENTIAL
TO REMOVE WARNING MESSAGE,
RESET FILTER TIMER.
A note of precaution when cleaning the air filter.
Please immediately turn the power off, and clean or change
the air filter referring to the “Air Filter” section of this manual.
After you have cleaned or changed the air filter, please be
sure to reset the filter timer( 40)
SEE MANUAL FURTHER INFO.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Regarding the indicator lamps
Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP
indicator have the meanings as described in the table below. Please follow the
instructions within the table. If the same indication is displayed after the remedy,
or if an indication other than the following is displayed, please contact your dealer
or service company.
POWER
indicator indicator indicator
LAMP
TEMP
Description
Lighting
In Orange
Turned
off
Turned
off
The projector is in a standby state.
Please refer to the section “Power On/Off”.
Blinking
In Green
Turned
off
Turned
off
The projector is warming up.
Please wait.
Lighting
In Green
Turned
off
Turned
off
The projector is in an on state.
Ordinary operations may be performed.
Blinking
In Orange
Turned
off
Turned
off
The projector is cooling down.
Please wait.
The projector is cooling down. A certain error
has been detected.
Please wait until the POWER indicator finishes
blinking, and then perform the proper measure using
the item descriptions below.
Blinking
In Red
(discre- (discre-
tionary) tionary)
The lamp does not light, and there is a
possibility that interior portion has become
heated.
Please turn the power off, and allow the projector to
cool down at least 20 minutes. After the projector has
Lighting Turned sufficiently cooled down, please make confirmation of
Blinking
In Red
or
Lighting
In Red
In Red
off
the following items, and then turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy,
please change the lamp referring to the section “Lamp”.
The lamp cover has not been properly fixed.
Please turn the power off, and allow the projector to
cool down at least 45 minutes. After the projector has
sufficiently cooled down, please make confirmation
of the attachment state of the lamp cover. After
performing any needed maintenance, turn the power
on again. If the same indication is displayed after
the remedy, please contact your dealer or service
company.
Blinking
In Red
or
Lighting
In Red
Blinking Turned
In Red off
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Regarding the indicator lamps (continued)
POWER
indicator indicator indicator
LAMP
TEMP
Description
The cooling fan is not operating.
Please turn the power off, and allow the projector to
cool down at least 20 minutes. After the projector has
Turned Blinking sufficiently cooled down, please make confirmation
Blinking
In Red
or
Lighting
In Red
off
In Red that no foreign matter has become caught in the fan,
etc., and then turn the power on again.
If the same indication is displayed after the remedy,
please contact your dealer or service company.
There is a possibility that the interior portion
has become heated.
Please turn the power off, and allow the projector to
cool down at least 20 minutes. After the projector has
sufficiently cooled down, please make confirmation of
Blinking
In Red
or
Lighting
In Red
Turned Lighting the following items, and then turn the power on again.
off
In Red • Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy,
please set FAN SPEED of the SERVICE item in the
OPTION menu to HIGH.
There is a possibility that the interior portion
has become overcooled.
Please use the projector within the usage temperature
parameters (5°C to 35°C). After the remedy, reset the
power to ON.
Lighting
In Green
Alternative
blinking in Red
It is time to clean the air filter
Please immediately turn the power off, and clean or
change the air filter referring to the section “Air Filter”.
After cleaning or changing the air filter, please be sure
to reset the filter timer. After the remedy, reset the
power to ON.
Lighting
In Green
Simultaneous
blinking in Red
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
►Never use the projector if abnormal operations such as
smoke, strange odor, excessive sound, damaged casing or elements or cables,
penetration of liquids or foreign matter, etc. should occur. In such cases,
immediately turn off the power switch and then disconnect the power plug from
the power outlet. After making sure that the smoke or odor has stopped, contact
your dealer or service company.
Before requesting repair, please check in accordance with the following chart.
This operation sometimes resolves your problem.
If the situation cannot be corrected,
The projector’s microprocessor may need to be reset. Please push the
Restart switch by using a cocktail stick or similar and the projector will restart.
Some setting may be wrong. Please use the FACTORY RESET function of the
(
37)
to reset all settings to factory default.
SERVICE item in the OPTION menu
Then, if the problem is not removed after the remedy, please contact your dealer
or service company.
page
Phenomenon
Cases not involving a machine defect
The electrical power cord is not plugged in.
Correctly connect the power cord.
13
The power switch is not set to the on position.
Set the power switch to [ | ] (On).
16
The main power source has been interrupted during
operation such as by a power outage (blackout), etc.
Please turn the power off, and allow the projector to cool
down at least 20 minutes. After the projector has sufficiently
cooled down, please turn the power on again.
16
Power does not
come on.
Either there is no lamp and/or lamp cover, or either
of these has not been properly fixed.
Please turn the power off, and allow the projector to cool down
at least 45 minutes. After the projector has sufficiently cooled
down, please make confirmation of the attachment state of the
lamp and lamp cover, and then turn the power on again.
38, 39
The signal cables are not correctly connected.
11,12
17
Correctly connect the audio cables.
The MUTE function is working.
Restore the sound pressing the MUTE or VOLUME button
on the remote control.
Sound does not
come out.
The volume is adjusted to an extremely low level.
Adjust the volume to a higher level using the menu function
or the remote control.
17
34
The AUDIO setting is not correct.
Correctly set the AUDIO item in the SETUP menu.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
page
Phenomenon
Cases not involving a machine defect
The lens cap is attached.
Remove the lens cap
4, 16
10, 11,
12
The signal cables are not correctly connected.
Correctly connect the connection cables.
The brightness is adjusted to an extremely low level.
Adjust BRIGHTNESS to a higher level using the menu
function or the remote control
No pictures are
displayed.
23, 25
The computer cannot detect the projector as a plug
and play monitor.
Make sure that the computer can detect a plug and play
monitor using another plug and play monitor.
10,11,
12
Video screen
The FREEZE function is working.
21
display freezes. Press the FREEZE button to restore the screen to normal.
Color settings are not correctly adjusted.
Perform picture adjustments by changing the COLOR
TEMP, COLOR TINT and/or COLOR SPACE settings,
using the menu functions.
23, 26,
30
Colors have a
faded- out
appearance, or
Color tone is
poor.
COLOR SPACE setting is not suitable.
Change the COLOR SPACE setting to AUTO, RGB,
SMPTE240, REC709 or REC601.
30
The brightness and/or contrast are adjusted to an
extremely low level.
Adjust BRIGHTNESS and/or CONTRAST settings to a
higher level using the menu function.
23, 25
Pictures appear
dark.
The WHISPER function is working.
Select NORMAL for the WHISPER item in the SETUP
menu.
23, 32
38, 39
The lamp is approaching the end of its product
lifetime.
Replace the lamp.
Either the focus and/or horizontal phase settings are
not properly adjusted.
Adjust the focus using the focus ring, and/or H PHASE
using the menu function.
18, 28
41
Pictures appear
blurry.
The lens is dirty or misty.
Clean the lens referring to the section “Caring for the lens”.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty And After-Service
Warranty and after-service
If a problem occurs with the equipment, first refer to the “Troubleshooting” and run
through the suggested checks. If this does not resolve the problem, please contact your
dealer or service company. They will tell you what warranty condition is applied.
Specifications
Specifications
Item
Specification
Product name
Liquid crystal projector
2.0 cm (0.79 type)
Panel size
Liquid
Crystal
panel
Drive system TFT active matrix
Pixels
786 432 pixels (1024 horizontal x 768 vertical)
Zoom lens F=1.7 2 1 f=24.4 29.3 mm
Lens
Lamp
230W UHB
Speaker
1W x 1
Power Supply
AC100-120V/4 0A, AC220-240V/2 0A
370W
Power Consumption
Temperature range
5 ~ 35°C (Operating)
336 (W) x 95 (H) x 265 (D) mm
(Not including protruding parts)
• Please refer to the following figure.
Size
3 7 kg, 8.2 lb.
Weight (mass)
RGB input:
Video input:
RGB IN1 D-sub 15pin mini x1 COMPONENT VIDEO
RGB IN2 D-sub 15pin mini x1
(Y, CB/PB, CR/PR)
S-Video
Video
RCA x3
1
1
RGB output:
RGB OUT D-sub 15pin mini x1
Ports
Communication port:
Audio input:
AUDIO 1
AUDIO 2
CONTROL
D-sub 9pin x1
Stereo mini x1
RCA x2
Audio output:
AUDIO OUT
Stereo mini x1
Lamp
456-8915
Optional
Air filter
parts
NJ20642
Others
• Please consult your dealer.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications (continued)
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Projector
8914
User's Manual – Operating Guide
Example of computer signal
Resolution (H x V) H. frequency (kHz) V. frequency (Hz)
Rating
Signal mode
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
1280 x 1024
1280 x 1024
1600 x 1200
37.9
31.5
37.9
37.5
43.3
35.2
37.9
48.1
46.9
53.7
49.7
48.4
56.5
60.0
68.7
67.5
60.0
64.0
80.0
91.1
75.0
85.0
59.9
72.8
75.0
85.0
56.3
60.3
72.2
75.0
85.1
74.5
60.0
70.1
75.0
85.0
75.0
60.0
60.0
75.0
85.0
60.0
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
TEXT
VGA (60Hz)
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 16” mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
SXGA (75Hz)
SXGA (60Hz)
SXGA (60Hz)
SXGA (75Hz)
SXGA (85Hz)
UXGA (60Hz)
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Example of computer signal
Initial set signals
The following signals are used for the initial settings. The signal timing of some
computer models may be different. In such case, adjust the items V POSITION
and H POSITION in the IMAGE menu.
Back porch (B)
Front porch (D)
Back porch (b)
Front porch (d)
)
Data
Data
V. S
H. Sync.
Sync (A)
Sync (a)
Horizontal signal timing (μs)
Vertical signal timing (lines)
Computer/
Computer/
Signal
Signal
(A)
2.0
3.8
1.3
2.0
1.6
(B)
(C)
(D)
(a)
3
2
3
3
3
2
4
6
3
3
3
6
6
3
3
(b)
42
33
28
16
25
22
23
23
21
27
39
29
29
28
36
(c)
(d)
1
10
9
1
1
1
1
37
1
1
TEXT
3.0 20.3 1.0
1.9 25.4 0.6
3.8 20.3 1.0
3.8 20.3 0.5
2.2 17.8 1.6
3.6 22.2 0.7
2.2 20.0 1.0
1.3 16.0 1.1
3.2 16.2 0.3
2.7 14.2 0.6
3.9 14.5 0.6
2.5 15.8 0.4
1.9 13.7 0.3
2.2 13.0 0.2
2.2 10.8 0.5
TEXT
400
480
480
480
480
600
600
600
600
600
624
768
768
768
768
VGA (60Hz)
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
VGA (60Hz)
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 16" mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
SVGA (56Hz) 2.0
SVGA (60Hz) 3.2
SVGA (72Hz) 2.4
SVGA (75Hz) 1.6
SVGA (85Hz) 1.1
Mac 16" mode 1.1
1
3
3
1
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
2.1
1.8
1.2
1.0
1
1152 x 864
(75Hz)
1280 x 960
(60Hz)
1280 x 1024
(60Hz)
1280 x 1024
(75Hz)
1280 x 1024
(85Hz)
1600 x 1200
(60Hz)
1152 x 864
(75Hz)
1280 x 960
(60Hz)
1280 x 1024
(60Hz)
1280 x 1024
(75Hz)
1280 x 1024
(85Hz)
1600 x 1200
(60Hz)
1.2
1.0
1.0
1.1
1.0
1.2
2.4 10.7 0.6
3
3
3
3
3
3
32
36
864
960
1
1
1
2
1
1
2.9
2.3
1.8
1.4
1.9
11.9
11.9
9.5
0.9
0.4
0.2
0.4
0.4
38 1024
37 1024
44 1024
46 1200
8.1
9.9
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to the ports
Connection to the ports
A
B
RGB IN1
RGB IN2
AUDIO 1-IN
AUDIO-OUT
K
C
L
E
RGB OUT
CONTRROOL
COMPONENT VIDEO
D
F
Y
C
R/PR
C
B/PB
R-AUDIO 2
VIDEO
S-VIDEO
G
I
H
A
B
C
RGB IN 1, RGB IN 2, RGB OUT
5
4
3
2
1
D-sub 15pin mini shrink jack
10
9
8
7
6
15 14 13 12 11
• Video signal: RGB separate, Analog, 0.7Vp-p,
75Ω terminated (positive)
• H/V. sync. Signal: TTL level (positive/negative)
• Composite sync. Signal: TTL level
At RGB signal
At component video signal
Pin
1
Signal
Pin
1
Signal
CR/PR
Video Red
2
3
Video Green
Video Blue
2
3
Y
CB/PB
4
5
(No connection)
Ground
4
5
(No connection)
Ground
6
7
8
9
Ground Red
Ground Green
Ground Blue
(No connection)
6
7
8
9
10
11
CR/PR Ground
Y Ground
CB/PB Ground
(No connection)
Ground
10 Ground
11 (No connection)
12
B C
(No connection)
: SDA (DDC data),
/
: (No connection)
B C
: (No connection)
15
13 H. sync / Composite sync.
14 V. sync.
* except for RGB OUT.
15
: SCL (DDC clock),
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to the ports
D
E
F
COMPONENT VIDEO , CB/PB
CR/PR
RCA jack x3
• System: 525i(480i), 525p(480p), 625i(576i), 750p(720p), 1125i(1080i)
Port
Y
Signal
Component video Y, 1.0±0.1Vp-p, 75Ω terminator with composite
B
CB/P Component video CB/PB, 0.7±0.1Vp-p, 75Ω terminator
R
R
C /P Component video CR/PR, 0.7±0.1Vp-p, 75Ω terminator
G
S-VIDEO
1
2
Mini DIN 4pin jack
3
4
Pin
Signal
Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator
Color signal 0.300Vp-p (PAL/SECAM, burst) 75Ω terminator
Brightness signal, 1.0Vp-p, 75Ω terminator
Ground
Ground
1
2
3
4
H
VIDEO
RCA jack
• System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL60
• 1.0±0.1Vp-p, 75Ω terminator
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to the ports
K
I J
Ø3.5 stereo mini jack),
AUDIO 1-IN (
AUDIO 2 L/R (RCA jack)
• 200mVrms(max.) 50kΩ termination
L
Ø3.5 stereo mini jack)
AUDIO OUT (
• 200mVrms(max.) 1kΩ output impedance
M
CONTROL
2
3
4
5
D-sub 9pin plug
6
7
8
9
• About the details of RS-232C communication, please refer to the following page.
Pin
1
Signal
(No connection)
Pin
4
Signal
(No connection)
Ground
Pin
7
Signal
RTS
CTS
2
3
RD
TD
5
6
8
9
(No connection)
(No connection)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C Communication
RS-232C Communication
1
2
3
4
5
1
2
3
4
5
6
6
8
8
7
9
7
9
CONTROL port
of the projector
RS-232C cable (Cross)
RS-232C port
of the computer
- (1)
RD (2)
- (4)
(1) CD
(2) RD
(3) TD
(4) DTR
(5) GND
(6) DSR
(7) RTS
(8) DTS
(9) RI
- (6)
RTS (7)
- (9)
Connecting the cable
Turn off the projector and the computer.
Connect the CONTROL port of the projector with a RS-232C port of
the computer by a RS-232C cable (cross). Use the cable that fulfills the
specification shown in the previous page.
Turn the computer on, and after the computer has started up turn the
projector on.
Communications setting
19200bps, 8N1
Consist of header (7 bytes) + command data (6 bytes).
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high
CRC_low : Lower byte of CRC flag for command data
CRC_high : Upper byte of CRC flag for command data
Command data chart
byte_0
byte_1
byte_2
byte_3
high
byte_4
Setting code
low
byte_5
high
Action
Type
low
high
low
Action (byte_0 - 1)
Action
Classification
Content
1
2
4
5
6
SET
GET
Change setting to desired value.
Read projector internal setup value.
INCREMENT Increment setup value by 1.
DECREMENT Decrement setup value by 1.
EXECUTE
Run a command.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C Communication (continued)
Requesting projector status (Get command)
(1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)+
‘00H’ +‘00H’) from the computer to the projector.
(2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.
Changing the projector settings (Set command)
(1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) +
setting code (2 bytes)) from the computer to the projector.
(2) The projector changes the setting based on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
Using the projector default settings (Reset Command)
(1) The computer sends the default setting code Header + Command data (‘06H’+
‘00H’ + type (2 bytes) +‘00H’+‘00H’) to the projector.
(2) The projector changes the specified setting to the default value.
(3) The projector returns the response code ‘06H’ to the computer.
Increasing the projector setting value (Increment command)
(1) The computer sends the increment code Header + Command data (‘04H’+
‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.
(2) The projector in creases the setting value on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
Decreasing the projector setting value (Decrement command)
(1) The computer sends the decrement code Header + Command data (‘05H’+
‘00H’+ type (2 bytes) +‘00H’ + ‘00H’) to the projector.
(2) The projector decreases the setting value on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
When the projector cannot understand the received command
When the projector cannot understand the received command, the error code ‘15H’
is sent back to the computer.
Sometimes the projector cannot properly receive the command. In such a
case, the command is not executed and the error code ‘15H’ is sent back to the
computer. If this error code is returned, send the same command again.
When the projector cannot execute the received command.
When the projector cannot execute the received command, the error code ‘1cH’
+ ‘xxxxH’ is sent back to the computer. When the data length is greater than
indicated by the data length code, the projector ignore the excess data code.
Conversely when the data length is shorter than indicated by the data length
code, an error code will be returned to the computer.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C Communication (continued)
Command Data
Names
Power
Operation Type
Header
CRC
Action
Type
Setting Code
Set
Set
Turn off
Turn on
Get
BE EF
BE EF
BE EF
03
03
03
06 00
06 00
06 00
2A D3
BA D2
19 D3
01 00
01 00
02 00
00 60
00 60
00 60
00 00
01 00
00 00
(Example return)
00 00
01 00
(On)
06 00
02 00
(Cool down)
(Off)
Input Source
Error Status
RGB IN 1
RGB IN 2
VIDEO
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
FE D2
3E D0
6E D3
9E D3
AE D1
CD D2
D9 D8
01 00
01 00
01 00
01 00
01 00
02 00
02 00
00 20
00 20
00 20
00 20
00 20
00 20
20 60
00 00
04 00
01 00
02 00
05 00
00 00
00 00
06 00
06 00
06 00
06 00
06 00
06 00
S-VIDEO
COMPONENT
Get
Get
(Example return)
00 00
01 00
(Cover error)
05 00
02 00
(Fan error)
06 00
03 00
(Lamp error)
07 00
(Normal)
04 00
(Temp error)
08 00
(Air flow error)
09 00
(Lamp time error)
10 00
(Cool error)
(Filter error) (Filter missing error)(Inner Sencer error)
BRIGHTNESS
Get
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
89 D2
EF D2
3E D3
58 D3
FD D3
9B D3
4A D2
A4 D2
23 F6
B3 F7
E3 F4
10 F6
02 00
04 00
05 00
06 00
02 00
04 00
05 00
06 00
01 00
01 00
01 00
02 00
03 20
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
01 00
04 00
00 00
Increment
Decrement
Execute
Get
03 20
03 20
00 70
04 20
04 20
04 20
01 70
BA 30
BA 30
BA 30
BA 30
BRIGHTNESS Reset
CONTRAST
Increment
Decrement
Execute
NORMAL
CINEMA
DYNAMIC
Get
CONTRAST Reset
MODE
Set
Set
(Example return)
00 00
01 00
04 00
10 00
(Normal)
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
(Cinema) (Dynamic) (Custom)
GAMMA
#1 DEFAULT
#1 CUSTOM
#2 DEFAULT
#2 CUSTOM
#3 DEFAULT
#3 CUSTOM
Get
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
07 E9
07 FD
97 E8
97 FC
67 E8
67 FC
F4 F0
01 00
01 00
01 00
01 00
01 00
01 00
02 00
A1 30
A1 30
A1 30
A1 30
A1 30
A1 30
A1 30
20 00
10 00
21 00
11 00
22 00
12 00
00 00
8
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C Communication (continued)
Command Data
Names
Operation Type
Header
CRC
Action
Type
Setting Code
User Gamma Pattern Set
Off
9 step gray scale
15 steps gray scale
Ramp
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
FB FA
6B FB
9B FB
0B FA
C8 FA
08 FE
6E FE
BF FF
F4 FF
92 FF
43 FE
B0 FF
D6 FF
07 FE
4C FE
2A FE
FB FF
38 FF
5E FF
8F FE
C4 FE
A2 FE
73 FF
80 FE
E6 FE
37 FF
7C FF
1A FF
CB FE
01 00
01 00
01 00
01 00
02 00
02 00
04 00
05 00
02 00
04 00
05 00
02 00
04 00
05 00
02 00
04 00
05 00
02 00
04 00
05 00
02 00
04 00
05 00
02 00
04 00
05 00
02 00
04 00
05 00
80 30
80 30
80 30
80 30
80 30
90 30
90 30
90 30
91 30
91 30
91 30
92 30
92 30
92 30
93 30
93 30
93 30
94 30
94 30
94 30
95 30
95 30
95 30
96 30
96 30
96 30
97 30
97 30
97 30
00 00
01 00
02 00
03 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
Get
User Gamma Point 1
User Gamma Point 2
User Gamma Point 3
User Gamma Point 4
User Gamma Point 5
User Gamma Point 6
User Gamma Point 7
User Gamma Point 8
Get
Increment
Decrement
Get
Increment
Decrement
Get
Increment
Decrement
Get
Increment
Decrement
Get
Increment
Decrement
Get
Increment
Decrement
Get
Increment
Decrement
Get
Increment
Decrement
COLOR TEMP
Set
LOW
MIDDLE
HIGH
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
6B F4
9B F4
0B F5
3B F8
C8 F5
34 F4
52 F4
83 F5
01 00
01 00
01 00
01 00
02 00
02 00
04 00
05 00
B0 30
B0 30
B0 30
B0 30
B0 30
B1 30
B1 30
B1 30
01 00
02 00
03 00
10 00
00 00
00 00
00 00
00 00
CUSTOM
Get
COLOR TEMP GAIN R
Get
Increment
Decrement
9
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C Communication (continued)
Command Data
Names
Operation Type
Header
CRC
Action
Type
Setting Code
COLOR TEMP GAIN G
Get
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
70 F4
16 F4
C7 F5
8C F5
EA F5
3B F4
04 F5
62 F5
B3 F4
40 F5
26 F5
F7 F4
BC F4
DA F4
0B F5
02 00
04 00
05 00
02 00
04 00
05 00
02 00
04 00
05 00
02 00
04 00
05 00
02 00
04 00
05 00
B2 30
B2 30
B2 30
B3 30
B3 30
B3 30
B5 30
B5 30
B5 30
B6 30
B6 30
B6 30
B7 30
B7 30
B7 30
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
Increment
Decrement
Get
COLOR TEMP GAIN B
Increment
Decrement
Get
COLOR TEMP
OFFSET R
Increment
Decrement
Get
COLOR TEMP
OFFSET G
Increment
Decrement
Get
COLOR TEMP
OFFSET B
Increment
Decrement
COLOR
Get
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
B5 72
D3 72
02 73
80 D0
49 73
2F 73
FE 72
7C D1
F1 72
97 72
46 73
C4 D0
4A 72
DA 73
2A 73
79 72
0E D7
9E D6
6E D6
FE D7
F2 D6
62 D7
92 D7
02 D6
02 00
04 00
05 00
06 00
02 00
04 00
05 00
06 00
02 00
04 00
05 00
06 00
01 00
01 00
01 00
02 00
01 00
01 00
01 00
01 00
01 00
01 00
01 00
01 00
02 22
02 22
02 22
0A 70
03 22
03 22
03 22
0B 70
01 22
01 22
01 22
09 70
07 22
07 22
07 22
07 22
14 20
14 20
14 20
14 20
15 20
15 20
15 20
15 20
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
01 00
02 00
00 00
00 00
01 00
02 00
03 00
00 00
01 00
02 00
03 00
Increment
Decrement
COLOR Reset
TINT
Execute
Get
Increment
Decrement
TINT Reset
Execute
SHARPNESS
Get
Increment
Decrement
SHARPNESS Reset
PROGRESSIVE
Execute
Set
TURN OFF
TV
FILM
Get
1
MY MEMORY Load Set
MY MEMORY Save Set
2
3
4
1
2
3
4
10
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C Communication (continued)
Command Data
Names
Operation Type
Header
CRC
Action
Type
Setting Code
ASPECT
Set
4:3
16:9
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
9E D0
0E D1
FE D1
5E DD
AD D0
91 70
F7 70
26 71
EC D9
0D 83
6B 83
BA 82
E0 D2
F1 82
97 82
46 83
1C D3
49 83
2F 83
FE 82
B5 82
D3 82
02 83
68 D2
91 D0
0E 72
01 00
01 00
01 00
01 00
02 00
02 00
04 00
05 00
06 00
02 00
04 00
05 00
06 00
02 00
04 00
05 00
06 00
02 00
04 00
05 00
02 00
04 00
05 00
06 00
06 00
01 00
01 00
01 00
01 00
01 00
02 00
01 00
01 00
02 00
01 00
01 00
01 00
01 00
01 00
01 00
01 00
02 00
08 20
08 20
08 20
08 20
08 20
09 22
09 22
09 22
27 70
00 21
00 21
00 21
02 70
01 21
01 21
01 21
03 70
03 21
03 21
03 21
02 21
02 21
02 21
04 70
0A 20
04 22
04 22
04 22
04 22
04 22
04 22
17 20
17 20
17 20
00 22
00 22
00 22
00 22
00 22
00 22
00 22
00 22
00 00
01 00
02 00
10 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
01 00
02 00
03 00
04 00
00 00
00 00
01 00
00 00
0A 00
04 00
05 00
09 00
02 00
08 00
07 00
00 00
SMALL
NORMAL
Get
OVER SCAN
Get
Increment
Decrement
Execute
Get
OVER SCAN Reset
V POSITION
Increment
Decrement
Execute
Get
V POSITION Reset
H POSITION
Increment
Decrement
Execute
Get
H POSITION Reset
H PHASE
Increment
Decrement
Get
H SIZE
Increment
Decrement
Execute
Execute
AUTO
H SIZE Reset
AUTO ADJUST
COLOR SPACE
Set
RGB
9E 73
6E 73
FE 72
CE 70
3D 72
4A D7
DA D6
79 D7
9E 75
FE 71
6E 70
6E 75
5E 72
FE 74
0E 71
0D 73
SMPTE240
REC709
REC601
Get
COMPONENT
Set
Set
COMPONENT
SCART RGB
Get
VIDEO FORMAT
AUTO
NTSC
PAL
SECAM
NTSC4.43
M-PAL
N-PAL
Get
11
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C Communication (continued)
Command Data
Names
Operation Type
Header
CRC
Action
Type
Setting Code
KEYSTONE V
Get
Increment
Decrement
Execute
NORMAL
WHISPER
Get
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
B9 D3
DF D3
0E D2
08 D0
3B 23
AB 22
08 23
C7 D2
57 D3
A7 D3
37 D2
F4 D2
31 D3
57 D3
86 D2
FE DD
6E DC
9E DC
CD DD
CE DC
5E DD
AE DD
FD DC
02 DC
92 DD
62 DD
31 DC
46 DC
D6 DD
26 DD
75 DC
32 DD
A2 DC
52 DC
01 DD
02 00
04 00
05 00
06 00
01 00
01 00
02 00
01 00
01 00
01 00
01 00
02 00
02 00
04 00
05 00
01 00
01 00
01 00
02 00
01 00
01 00
01 00
02 00
01 00
01 00
01 00
02 00
01 00
01 00
01 00
02 00
01 00
01 00
01 00
02 00
07 20
07 20
07 20
0C 70
00 33
00 33
00 33
01 30
01 30
01 30
01 30
01 30
01 20
01 20
01 20
30 20
30 20
30 20
30 20
34 20
34 20
30 20
34 20
31 20
31 20
30 20
31 20
32 20
32 20
30 20
32 20
35 20
35 20
30 20
35 20
00 00
00 00
00 00
00 00
00 00
01 00
00 00
00 00
01 00
02 00
03 00
00 00
00 00
00 00
00 00
00 00
01 00
02 00
00 00
00 00
01 00
02 00
00 00
00 00
01 00
02 00
00 00
00 00
01 00
02 00
00 00
00 00
01 00
02 00
00 00
KEYSTONE V Reset
WHISPER
Set
Set
MIRROR
NORMAL
H:INVERT
V:INVERT
H&V:INVERT
Get
VOLUME
Get
Increment
Decrement
TURN OFF
Audio1
AUDIO - RGB1
Set
Set
Set
Set
Audio2
Get
AUDIO - RGB2
AUDIO - Video
AUDIO - S-Video
TURN OFF
Audio1
Audio2
Get
TURN OFF
Audio1
Audio2
Get
TURN OFF
Audio1
Audio2
Get
AUDIO - Component Set
TURN OFF
Audio1
Audio2
Get
12
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C Communication (continued)
Command Data
Names
MUTE
Operation Type
Header
CRC
Action
Type
Setting Code
Set
Set
TURN OFF
TURN ON
Get
BE EF
BE EF
BE EF
03
03
03
06 00
06 00
06 00
46 D3
D6 D2
75 D3
01 00
01 00
02 00
02 20
02 20
02 20
00 00
01 00
00 00
LANGUAGE
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
F7 D3
67 D2
97 D2
07 D3
37 D1
A7 D0
57 D0
C7 D1
37 D4
A7 D5
37 DE
57 D5
C7 D4
F7 D6
67 D7
97 D7
07 D6
C4 D3
04 D7
62 D7
B3 D6
DC C6
01 00
01 00
01 00
01 00
01 00
01 00
01 00
01 00
01 00
01 00
01 00
01 00
01 00
01 00
01 00
01 00
01 00
02 00
02 00
04 00
05 00
06 00
05 30
05 30
05 30
05 30
05 30
05 30
05 30
05 30
05 30
05 30
05 30
05 30
05 30
05 30
05 30
05 30
05 30
05 30
15 30
15 30
15 30
43 70
00 00
01 00
02 00
03 00
04 00
05 00
06 00
07 00
08 00
09 00
10 00
0A 00
0B 00
0C 00
0D 00
0E 00
0F 00
00 00
00 00
00 00
00 00
00 00
ITALIANO
NORSK
NEDERLANDS
PORTUGUÊS
SVENSKA
PУCCKИЙ
SUOMI
POLSKI
TÜRKÇE
Get
MENU POSITION H
Get
Increment
Decrement
Execute
MENU POSITION H
Reset
MENU POSITION V
Get
BE EF
BE EF
BE EF
BE EF
03
03
03
03
06 00
06 00
06 00
06 00
40 D7
26 D7
F7 D6
A8 C7
02 00
04 00
05 00
06 00
16 30
16 30
16 30
44 70
00 00
00 00
00 00
00 00
Increment
Decrement
Execute
MENU POSITION V
Reset
13
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C Communication (continued)
Command Data
Names
Operation Type
Header
CRC
Action
Type
Setting Code
OSD BRIGHT.
Get
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
A8 D5
CE D5
1F D4
FB CA
FB E2
CB D3
6B D0
9B D0
08 D3
FB D8
6B D9
C8 D8
CB CB
0B D2
9B D3
38 D2
3B EF
AB EE
08 EF
8F D6
1F D7
BC D6
02 00
04 00
05 00
01 00
01 00
01 00
01 00
01 00
02 00
01 00
01 00
02 00
01 00
01 00
01 00
02 00
01 00
01 00
02 00
01 00
01 00
02 00
18 30
18 30
18 30
00 30
00 30
00 30
00 30
00 30
00 30
20 30
20 30
20 30
04 30
04 30
04 30
04 30
C0 30
C0 30
C0 30
17 30
17 30
17 30
00 00
00 00
00 00
20 00
40 00
03 00
05 00
06 00
00 00
00 00
01 00
00 00
20 00
00 00
01 00
00 00
00 00
01 00
00 00
00 00
01 00
00 00
Increment
Decrement
My Screen
ORIGINAL
BLUE
BLANK
Set
WHITE
BLACK
Get
BLANK On/Off
START UP
Set
Set
TURN OFF
TURN ON
Get
My Screen
ORIGINAL
TURN OFF
Get
My Screen LOCK
Message
Set
Set
TURN OFF
TURN ON
Get
TURN OFF
TURN ON
Get
AUTO SEARCH
Set
TURN OFF
TURN ON
Get
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
B6 D6
26 D7
85 D6
08 86
6E 86
BF 87
C2 FF
58 DC
C2 F0
98 C6
7C D2
1A D2
CB D3
83 D2
13 D3
B0 D2
01 00
01 00
02 00
02 00
04 00
05 00
02 00
06 00
02 00
06 00
02 00
04 00
05 00
01 00
01 00
02 00
16 20
16 20
16 20
10 31
10 31
10 31
90 10
30 70
A0 10
40 70
07 30
07 30
07 30
02 30
02 30
02 30
00 00
01 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
01 00
00 00
AUTO POWER OFF
Get
Increment
Decrement
Get
LAMP TIME
LAMP TIME Reset
FILTER TIME
Execute
Get
FILER TIME Reset
MAGNIFY
Execute
Get
Increment
Decrement
NORMAL
FREEZE
Get
FREEZE
Set
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Visual Products
2900 Dukane Drive
St. Charles, Illinois 60174
Toll-free: 800-676-2487
Fax: 630-584-5156
e-mail: [email protected]
#401-8914-00
Download from Www.Somanuals.com. All Manuals Search And Download.
|