Dukane Projector 8766 User Manual

Liquid Crystal Projector

Model 8766

USER'S MANUAL

Download from Www.Somanuals.com. All Manuals Search And Download.

Fire and Shock Precautions

What's in the Box?

Make sure your box contains everything listed. If any pieces are miss-

ing, contact your dealer.

1. Ensure that there is sufficient ventilation and that vents are unob-

structed to prevent the build-up of heat inside your projector. Allow

at least 3 inches (10 cm) of space between your projector and a

wall.

Please save the original box and packing materials if you ever need to

ship your Dukane 8766 Projector.

2. Prevent foreign objects such as paper clips and bits of paper from

falling into your projector.

Do not attempt to retrieve any objects that might fall into your pro-

jector. Do not insert any metal objects such as a wire or screwdriver

into your projector. If something should fall into your projector, dis-

connect it immediately and have the object removed by a qualified

NEC service personnel.

Lens cap

3. Do not place any liquids on top of your projector.

4. Do not look into the lens while the projector is on. Serious damage

to your eyes could result.

Projector

5. Keep any items such as magnifying glass out of the light path of the

projector. The light being projected from the lens is extensive, there-

fore any kind of abnormal objects that can redirect light coming out

of the lens, can cause unpredictable outcome such as fire or injury

to the eyes.

-V

SELECT

PIC

-M

6. Do not cover the lens with the supplied lens cap or equivalent while

the projector is on. Doing so can lead to melting of the cap and

possibly burning your hands due to the heat emitted from the light

output.

Remote control

String and rivet

7. The projector is designed to operate on a power supply of 100-120

or 200-240 V 50/60 Hz AC. Ensure that your power supply fits this

requirement before attempting to use your projector.

8. Handle the power cable carefully and avoid excessive bending.

A damaged cord can cause electric shock or fire.

9. If the projector is not to be used for an extended period of time,

disconnect the plug from the power outlet.

10. Do not touch the power plug during a thunderstorm. Doing so can

cause electrical shock or fire.

Power cable

USB cable

RGB signal cable

CAUTION

1. Do not try to touch the ventilation outlet on the front as it can be-

come heated while the projector is turned on.

2. Do no use the tilt-foot for purposes other than originally intended.

Misuses such as gripping the tilt-foot or hanging on the wall can

cause damage to the projector.

3. When carrying the projector by the carrying handle, make sure the

two screws that attach the carrying handle to the projector cabinet

are tight.

Insufficient tightening of the two screws could result in the projector

falling and causing injury.

Soft carrying case

Carrying handle, Screw (M4

4. Enable High-Speed Fan mode if you continue to use the projector

for consecutive days. (From the menu, select [Advanced] → [High

Speed Fan Mode].)

Flathead screwdriver

5. Do not unplug the power cable from the wall outlet under any one of

the following circumstances.

Doing so can cause damage to the projector:

While the Hour Glass icon appears.

While the cooling fans are running. (The cooling fans continue

to work for 60 seconds after the projector is turned off).

Lamp Replacement

User's Manual

•

To replace the lamp, follow all instructions provided on page E-30.

•

Be sure to replace the lamp when the message "The lamp has

reached the end of its usable life. Please replace the lamp."

appears. If you continue to use the lamp after the lamp has reached

the end of its usable life, the lamp bulb may shatter, and pieces of

glass may be scattered in the lamp case. Do not touch them as the

pieces of glass may cause injury.

If this happens, contact your dealer for lamp replacement.

•

Allow a minimum of 60 seconds to elapse after turning off the pro-

jector. Then turn off the main power switch, disconnect the power

cable and allow 60 minutes to cool the projector before replacing

the lamp.

E-3

Download from Www.Somanuals.com. All Manuals Search And Download.

TABLE OF CONTENTS

Important Information ..................................................... E-2

Safety Cautions ............................................................................................................... E-2

What's in the Box? .......................................................................................................... E-3

TROUBLESHOOTING ........................................................ E-32

Power Indicator ............................................................................................................. E-32

Status Indicator ............................................................................................................. E-32

Lamp Indicator .............................................................................................................. E-32

Common Problems & Solutions .................................................................................... E-33

INTRODUCTION .............................................................. E-5

Introduction to the Projector ........................................................................................... E-5

Part Names of the Projector ............................................................................................ E-6

Attaching the lens cap ................................................................................................. E-6

Attaching the supplied carrying handle ........................................................................ E-6

Top Features ................................................................................................................ E-7

Terminal Panel Features ............................................................................................... E-8

Part Names of the Remote Control .............................................................................. E-9

Battery Installation ................................................................................................. E-10

Remote Control Precautions .................................................................................. E-10

Operating Range for Wireless Remote Control ...................................................... E-10

SPECIFICATIONS ........................................................... E-34

APPENDIX ................................................................... E-35

Cabinet Dimensions ...................................................................................................... E-35

Pin Assignments of D-Sub RGB Input Connector .......................................................... E-35

Compatible Input Signal List ......................................................................................... E-36

INSTALLATION AND CONNECTIONS ....................................... E-11

Setting Up the Screen and the Projector ....................................................................... E-11

Selecting a Location .................................................................................................. E-11

Throw Distance and Screen Size ............................................................................... E-12

Making Connections ...................................................................................................... E-13

Connecting Your PC or Macintosh Computer ............................................................ E-13

To connect SCART output (RGB) ............................................................................... E-14

Connecting an External Monitor ................................................................................ E-14

Connecting Your DVD Player ..................................................................................... E-15

Connecting Your VCR or Laser Disc Player ............................................................... E-16

Connecting the Supplied Power Cable ....................................................................... E-16

PROJECTING AN IMAGE (BASIC OPERATION) ........................... E-17

Turning on the Projector ................................................................................................ E-17

Selecting a Source ......................................................................................................... E-18

Adjusting the Picture Size and Position ......................................................................... E-18

Correcting the Vertical Keystone Distortion ................................................................... E-19

Optimizing RGB Picture Automatically .......................................................................... E-20

Turning Up or Down Volume ......................................................................................... E-20

Turning off the Projector ............................................................................................... E-20

CONVENIENT FEATURES ................................................... E-21

Using the Remote Mouse Function ............................................................................... E-21

Connecting to your computer for the remote mouse function ................................... E-21

When using the USB Port .......................................................................................... E-21

Switching operation mode between computer and projector ..................................... E-21

Turning Off the Image and Sound .................................................................................. E-22

Freezing a Picture .......................................................................................................... E-22

Enlarging and Moving a Picture ..................................................................................... E-22

Getting the Information ................................................................................................. E-22

USING ON-SCREEN MENU ................................................. E-23

Basic Menu Operation ................................................................................................... E-23

Using the Menus ....................................................................................................... E-23

List of Menu Items ........................................................................................................ E-24

Menu Elements ............................................................................................................. E-25

Menu Descriptions & Functions .................................................................................... E-26

Picture ....................................................................................................................... E-26

Brightness/Contrast/Sharpness/Color/Hue ............................................................ E-26

Picture Management .............................................................................................. E-26

Image ........................................................................................................................ E-26

Enabling Auto Keystone <Auto Keystone> ............................................................. E-26

Correcting Vertical Keystone Distortion Manually <Keystone> .............................. E-26

Saving Vertical Keystone Correction <Keystone Save> .......................................... E-26

Selecting Aspect Ratio [Aspect Ratio] ................................................................... E-27

Adjusting the Vertical Position of Image [Cinema Position](for Cinema only) ....... E-27

Setup ......................................................................................................................... E-27

Selecting Lamp Mode [Lamp Mode] ...................................................................... E-27

Selecting Menu Language [Language] ................................................................... E-27

Selecting Menu Color [Menu Color Select] ............................................................ E-27

Selecting Menu Display Time [Menu Display Time] ............................................... E-27

Selecting a Color or Logo for Background [Background] ...................................... E-27

Selecting Projector Orientation [Orientation] ......................................................... E-27

Advanced ................................................................................................................... E-27

Disabling the Cabinet Buttons [Control Panel Key Lock] ........................................ E-27

Enabling Power Management [Power Management] ............................................. E-27

Enabling High Speed Fan Mode [High Speed Fan Mode] ....................................... E-27

Selecting Signal Format [Signal Select] ................................................................. E-28

Page2 .................................................................................................................... E-28

Selecting Noise Reduction Level (not available for RGB) ....................................... E-28

Enabling Auto Adjust [Auto Adjust] ....................................................................... E-28

Adjusting Position/Clock (when Auto Adjust is off) ............................................... E-28

Information ................................................................................................................ E-28

Default ....................................................................................................................... E-29

MAINTENANCE ............................................................. E-30

Replacing the Lamp ...................................................................................................... E-30

Cleaning ........................................................................................................................ E-31

Cleaning or Replacing the Filter ................................................................................. E-31

Cleaning the Cabinet and the Lens ............................................................................. E-31

E-4

Download from Www.Somanuals.com. All Manuals Search And Download.

INTRODUCTION

About this user's manual

Introduction to the Projector

This section introduces you to your new Dukane 8766 Projector

and describes the features and controls.

The fastest way to get started is to take your time and do ev-

erything right the first time. Take a few minutes now to review

the user's manual. This may save you time later on. At the

beginning of each section of the manual you'll find an over-

view. If the section doesn't apply, you can skip it.

Congratulations on Your Purchase of The Projector

The Dukane 8766 is one of the very best projectors available

today. The Dukane 8766 enables you to project precise images

up to 300 inches across (measured diagonally) from your PC or

Macintosh computer (desktop or notebook), VCR, DVD player, docu-

ment camera, or a laser disc player.

You can use the projector on a tabletop or cart, you can use the projec-

tor to project images from behind the screen, and the projector can be

permanently mounted on a ceiling*¹. The remote control can be used

wirelessly.

•

IBM is a trademark or registered trademark of International Business

Machines Corporation.

Mac and PowerBook are trademarks of Apple Computer, Inc., regis-

tered in the U.S. and other countries.

Windows, Windows 98, Windows Me, Windows XP or Windows 2000

are trademarks or registered trademarks of Microsoft Corporation.

Other product and company names mentioned in this user’s manual

may be the trademarks or registered trademarks of their respective

holders.

Do not attempt to mount the projector on a ceiling yourself.

The projector must be installed by qualified technicians in order

to ensure proper operation and reduce the risk of bodily injury.

In addition, the ceiling must be strong enough to support the pro-

jector and the installation must be in accordance with any local

building codes. Please consult your dealer for more information.

Features you'll enjoy:

•

Auto vertical keystone correction up to +/- 30 degrees

Low level noise

Short focal length lens

200W lamp (160W Eco mode)

Direct keys for source selection

New Color Management system

New menu design improves operability

Advanced intelligent pixel blending technology-

an extremely accurate image compression technology - of-

fers a crisp image with UXGA (1600

1200) resolution.

•

Supports most IBM VGA, SVGA, XGA, SXGA/UXGA

Macintosh, component signal (YCbCr/ YPbPr) or any

other RGB signals within a horizontal frequency range of 24 to 100

kHz and a vertical frequency range of 50 to 120 Hz. This includes

NTSC, PAL, PAL-N, PAL-M, PAL60, SECAM and NTSC4.43 stan-

dard video signals.

NOTE: Composite video standards are as follows:

NTSC: U.S. TV standard for video in U.S. and Canada.

PAL: TV standard used in Western Europe.

PAL-N: TV standard used in Argentine, Paraguay and Uruguay.

PAL-M: TV standard used in Brazil.

PAL60: TV standard used for NTSC playback on PAL TVs.

SECAM: TV standard used in France and Eastern Europe.

NTSC4.43: TV standard used in Middle East countries.

•

The supplied remote control can be used without a cable, and you

can even use the remote control to operate your PC's mouse

wirelessly from across the room with the built-in remote mouse func-

tion.

•

You can control the projector with a PC using the PC Control port.

The contemporary cabinet design is light, compact, easy to carry,

and complements any office, boardroom or auditorium.

E-5

Download from Www.Somanuals.com. All Manuals Search And Download.

Part Names of the Projector

Controls (See page E-7)

Monaural Speaker (1W)

Zoom Lever

Lamp Cover (See page E-30)

Lamp Cover Screw

Focus Ring

Lens

Ventilation (outlet)

Heated air is exhausted from here

Adjustable Tilt Foot Lever

(See page E-18)

Adjustable Tilt Foot

(See page E-18)

Adjustable Tilt Foot Lever

(See page E-18)

Lens Cap

Adjustable Tilt Foot (See page E-18)

Remote Sensor (See page E-10)

Remote Sensor

(See page E-10)

Ventilation (inlet) / Filter Cover (inlet)

Built-in Security Slot ( )*

AC Input

Connect the supplied power cable's two-

pin plug here, and plug the other end into

an active wall outlet. (See page E-16)

Main Power Switch

When you plug the supplied power cable into

an active wall outlet and turn on the Main

Power switch, the POWER indicator turns

orange and the projector is in standby mode.

(See page E-17)

This security slot supports the MicroSaver^®Security System. MicroSaver^®is a registered trademark of Kensington Microware Inc. The logo is

trademarked and owned by Kensington Microware Inc.

Attaching the lens cap

Attaching the supplied carrying handle

To attach the lens cap to the bottom with the supplied string and rivet:

You can carry the projector by attaching the supplied carrying handle

securely to the projector.

1. Thread the string through the hole on the lens cap and then tie a knot

in the string.

To attach the supplied carrying handle, use the supplied flathead screw-

driver and two screws.

2. Use the rivet to attach the

string to the bottom of the

projector.

CAUTION:

When carrying the projector by the carrying handle, make sure the

two screws that attach the carrying handle to the projector cabinet

are tight.

E-6

Download from Www.Somanuals.com. All Manuals Search And Download.

12. ENTER Button

Executes your menu selection and activates items selected from the

menu.

Top Features

6 7 8

2 3 4

13. CANCEL Button

Pressing this button will return to the previous menu.

While you are in the main menu, pressing this button will close the

menu.

1. POWER Button (ON / STAND BY)(

)

Use this button to turn the power on and off when the main power is

supplied and the projector is in standby mode.

To turn on the projector, press and hold this button for a minimum of

two seconds. To turn off the projector, press this button twice.

2. POWER Indicator

When this indicator is green, the projector is on; when this indicator

is orange, it is in standby mode. See the Power Indicator section on

page E-32 for more details.

3. STATUS Indicator

If this light blinks red rapidly, it indicates that an error has occurred,

the lamp cover is not attached properly or the projector has over-

heated. If this light remains orange, it indicates that you have pressed

a cabinet key while the Control Panel Key Lock is enabled. See the

Status Indicator section on page E-32 for more details.

4. LAMP Indicator

If this light blinks red rapidly, it's warning you that the lamp has reached

the end of its usable life. After this light appears, replace the lamp as

soon as possible (See page E-30). If this is lit green continually, it

indicates that the lamp mode is set to Eco. See the Lamp Indicator

section on page E-32 for more details.

5. VIDEO Button

Press this button to select a video source from a VCR, DVD player,

laser disc player or document camera.

6. S-VIDEO Button

Press this button to select an S-Video source from a VCR.

7. RGB Button

Press this button to select an RGB source from computer or compo-

nent equipment connected to your RGB port.

8. AUTO ADJ. Button

Use this button to adjust Position-H/V and Pixel Clock/Phase for an

optimal picture (See page E-20).

9. Source Indicators

When one of the RGB, VIDEO or S-VIDEO input is selected, the

corresponding source indicator lights.

10. MENU Button

Displays the menu.

11. SELECT GHFE / Volume Buttons

GH : Use these buttons to select the menu of the item you wish to

adjust.

FE : Use these buttons to change the level of a selected menu item.

A press of the Ebutton executes the selection. When no menus

appear, these buttons work as a volume control.

When an image is magnified, the SELECT GHFE button moves the

image.

E-7

Download from Www.Somanuals.com. All Manuals Search And Download.

Terminal Panel Features

1. RGB IN / Component Input Connector (Mini D-Sub 15 Pin)

Connect your computer or other analog RGB equipment such as IBM

compatible or Macintosh computers. Use the supplied RGB cable to

connect to your computer. This also serves as a component input

connector that allows you to connect a component video output of

component equipment such as a DVD player. This connector also

supports SCART output signal. See page E-14 for more details.

2. RGB AUDIO Input Mini Jack (Stereo Mini)

This is where you connect the audio output from your computer or

DVD player when connected to the RGB input. A commercially avail-

able audio cable is required.

3. RGB OUT Connector (Mini D-Sub 15 Pin)

You can use this connector to loop your computer image to an exter-

nal monitor from the RGB input source.

This connector outputs RGB signal in standby mode.

4. AUDIO OUT Mini Jack (Stereo Mini)

You can use this jack to output sound from the currently selected

source (RGB, VIDEO or S-VIDEO). Output sound level can be ad-

justed in accordance with the sound level of the internal speaker.

5. S-VIDEO IN Connector (Mini DIN 4 Pin)

Here is where you connect the S-Video input from an external source

like a VCR.

NOTE: S-Video provides more vivid color and higher resolution than the tra-

ditional composite video format.

S-VIDEO AUDIO Input Jacks R/L (RCA)

These are your left and right channel audio inputs for stereo sound

from an S-Video source.

6. VIDEO IN Connector (RCA)

Connect a VCR, DVD player, laser disc player, or document camera

here to project video.

VIDEO AUDIO Input Jacks R/L (RCA)

These are your left and right channel audio inputs for stereo sound

from a Video source.

7. USB (PC) Port (Type B)

Connect this port to the USB port (type A) of your PC using the sup-

plied USB cable. You can operate your computer's mouse functions

from the remote control.

8. PC CONTROL Port (DIN 8 Pin)

For service personnel only.

E-8

Download from Www.Somanuals.com. All Manuals Search And Download.

9. MENU Button

Displays the menu for various settings and adjustments.

Part Names of the Remote Control

NOTE: If you are using a Macintosh computer, you can click either the CANCEL

(right-click) or ENTER (left-click) button to activate the mouse.

10. SELECT GHFE (Mouse) Button

When you are in the Computer mode, these buttons work as a com-

puter mouse.

When you are in the Projector mode, which is indicated by lighting

the PJ button. See page E-21.

GH : Use these buttons to select the menu of the item you wish

to adjust.

OFF

POWER

FE : Use these buttons to change the level of a selected menu

item. A press of the E button executes the selection. When

no menus appear, these buttons work as a volume control.

When an image is magnified, the SELECT GHFE button moves the

image.

VIDEO

AUTO ADJ.

S-VIDEO RGB

11. ENTER (Left Click) Button

When you are in the Computer mode, this button works as the mouse

left button. When this button is pressed and held for a minimum of 2

seconds, the drag mode is set. When you are in the Projector mode,

which is indicated by lighting the PJ button: Use this button to enter

your menu selection. It works the same way as the ENTER button on

the cabinet. See page E-7.

SELECT

12. CANCEL (Right Click) Button

When you are in the Computer mode, this button works as the mouse

right button. When you are in the Projector mode, which is indicated

by lighting the PJ button: It works the same way as the CANCEL

button on the cabinet. See page E-7.

PICTURE

ASPECT

HELP

FREEZE PIC-MUTE

MAGNIFY

13. PJ Button

Press this button to switch the SELECT, CANCEL, and ENTER but-

tons between the Projector mode (lit red) and the Computer mode.

Press this button or any one of the POWER ON/OFF, MENU, AS-

PECT, HELP, MAGNIFY, buttons to switch to the Projector mode and

the PJ button lights red. To switch back to the Computer mode, press

the PJ button again. See page E-21.

VOLUME

14. PICTURE Button

Press this button to display the Picture adjustement screen such as

Brightness, Contrast, Sharpness, Color and Hue. See page E-26.

15. ASPECT Button

Press this button to display theAspect Ratio select screen. See page

E-27.

1. Infrared Transmitter

Direct the remote control toward the remote sensor on the projector

cabinet.

16. HELP Button

Provides the set information.

2. LED

Flashes when any button is pressed.

17. FREEZE Button

This button will freeze a picture. Press again to resume motion.

3. POWER ON Button

When the main power is on, you can use this button to turn your

projector on.

18. PIC-MUTE Button

This button turns off the image and sound for a short period of time.

Press again to restore the image and sound.

NOTE: To turn on the projector, press and hold the POWER ON button for a

minimum of two seconds.

4. POWER OFF Button

You can use this button to turn your projector off.

19. MAGNIFY (+)(–) Button

Use this button to adjust the image size up to 400%.

NOTE: To turn off the projector, press the POWER OFF button twice.

The image is magnified about the center of the screen. See page E-

22.

5. VIDEO Button

Press this button to select a video source from a VCR, DVD player,

laser disc player or document camera.

20. VOLUME (+)(–) Button

Press (+) to increase the volume and (–) to decrease it.

6. S-VIDEO Button

Press this button to select an S-Video source from a VCR.

NOTE: The default is the Computer mode, which allows you to use the SELECT,

CANCEL, and ENTER buttons as your computer mouse. When the POWER ON/

OFF, MENU, ASPECT, HELP, or MAGNIFY button is pressed, the PJ button lights

red to indicate that you are in the Projector mode. If no buttons are pressed

within 60 seconds, the light goes out and the Projector mode is canceled.

7. RGB Button

Press this button to select RGB input.

8. AUTO ADJ. Button

Use this button to adjust an RGB source for an optimal picture.

See page E-20.

E-9

Download from Www.Somanuals.com. All Manuals Search And Download.

Battery Installation

Remote Control Precautions

1. Press firmly and slide the battery cover off.

•

Handle the remote control carefully.

If the remote control gets wet, wipe it dry immediately.

Avoid excessive heat and humidity.

If you will not be using the remote control for a long time, remove the

batteries.

•

Do not place the batteries upside down.

Do not use new and old batteries together, or use different types of

batteries together

2. Remove both old batteries and install new ones (AA). Ensure that

you have the batteries' polarity (+/-) aligned correctly.

Operating Range for Wireless Remote Control

7m/22 feet

30˚

3. Slip the cover back over the batteries until it snaps into place. Do not

mix different types of batteries or new and old batteries.

Remote sensor on

projector cabinet

Remote control

•

The infrared signal operates by line-of-sight up to a distance of about

22 feet/7 m and within a 60-degree angle of the remote sensor on the

projector cabinet.

The projector will not respond if there are objects between the re-

mote control and the sensor, or if strong light falls on the sensor.

Weak batteries will also prevent the remote control from properly

operating the projector.

Note on Remote Control Operation:

If you press and hold the SELECT GHFE button while installing new

batteries, the remote control may fail to work properly.

Should this happen, remove the batteries and then install them again

without touching the SELECT button.

E-10

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION AND CONNECTIONS

This section describes how to set up your projector and how to connect video and audio sources.

Your projector is simple to set up and use.

But before you get started, you must first:

1Set up a screen and the projector.

2Connect your computer or video equip-

ment to the projector. See page

E-13 – 16.

3Connect the supplied power cable. See

page E-16.

NOTE: Ensure that the power cable and any

other cables are disconnected before moving

the projector. When moving the projector or

when it is not in use, cover the lens with the

lens cap.

To the wall outlet.

Setting Up the Screen and the Projector

Selecting a Location

The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 21" (0.53 m)

measured diagonally when the projector is roughly 27.6 inches (0.7 m) from the wall or screen. The largest the image can be is 300" (7.6 m) when

the projector is about 393.7 inches (10 m) from the wall or screen. Use the drawing below as a guide.

Screen size (Unit: cm/inch)

609.6(W)X457.2(H)/240(W)X180(H)

487.7(W)X365.8(H)/192(W)X144(H)

406.4(W)X304.8(H)/160(W)X120(H)

Screen Size

365.8(W)X274.3(H)/144(W)X108(H)

300"

240"

304.8(W)X228.6(H)/120(W)X90(H)

200"

243.8(W)X182.9(H)/96(W)X72(H)

180"

203.2(W)X152.4(H)/80(W)X60(H)

150"

162.6(W)X121.9(H)/64(W)X48(H)

120"

121.9(W)X91.4(H)/48(W)X36(H)

100"

81.3(W)X61.0(H)/32(W)X24(H)

61.0(W)X45.7(H)/24(W)X18(H)

50.8(W)X38.1(H)/20(W)X15(H)

80"

60"

42.7(W)X32(H)/17(W)X13(H)

40"

30"

25"

21"

Lens center

0.7/27.6"

0.8/31.5"

1.0/39.4"

1.3/51.2"

2.0/78.7"

2.7/106.3"

3.4/133.9"

6.1/240.2"

4.0/157.5"

5.1/200.8"

6.7/263.8"

8.1/318.9"

10.1/397.6"

Distance (Unit: m/inch)

E-11

Download from Www.Somanuals.com. All Manuals Search And Download.

Throw Distance and Screen Size

The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation.

Distance Chart

Screen Width

B = Vertical distance between lens center and screen center

C = Throw distance

D = Vertical distance between lens center and top of screen (bottom of

screen for desktop)

α = Throw angle

Screen Diagonal

NOTE: Distances may vary +/-5%.

Screen Height

Screen center

(

)

Screen Bottom

Lens Center

Throw Angle (α)

(

)

Throw Distance

Screen Size

Diagonal

inch

Width

inch

Height

inch

Wide – Tele

inch

Wide – Tele

degree

Diagonal

Width

Height

Wide – Tele

degree

inch

130

150

180

–––

––– - 10.0

533

427

320

–––

740

880

––– - 10.0

11.8

11.7

11.6

11.5

11.4

11.3

9.9

9.8

9.7

9.6

9.5

635

762

508

610

813

381

11.8

11.7

11.6

11.5

11.4

11.3

9.9

9.8

9.7

9.6

9.5

457

890 - 1070

1016

1524

1829

2032

2134

2286

2540

3048

3810

4572

5080

5334

6096

6858

7620

610

250 1200 - 1440

370 1810 - 2180

440 2180 - 2620

490 2430 - 2920

520 2550 - 3060

550 2740 - 3290

610 3050 - 3660

740 3660 - 4400

920 4590 - 5510

1110 5510 - 6610

1230 6130 - 7350

1290 6440 - 7720

1470 7360 - 8830

1660 8290 - 9940

1840 9210 -11050

1219

1463

1626

1707

1829

2032

2438

3048

3658

4064

4267

4877

5486

6096

914

103

115

121

129

144

173

217

260

290

304

348

391

400

1097

1219

1280

1372

1524

1829

2286

2743

3048

3200

3658

4115

4572

110

120

130

150

180

220

270

300

310

350

400

440

101

108

120

144

181

217

241

253

290

326

363

100

120

150

180

200

210

240

270

300

120

144

160

168

192

216

240

108

120

126

144

162

180

WARNING

Reflecting the Image

Installing your projector on the ceiling must be done by a quali-

fied technician. Contact your dealer for more information.

Using a mirror to reflect your projector's image enables you to enjoy a

much larger image. Contact your dealer if you need a mirror. If

you're using a mirror and your image is inverted, use the MENU and

SELECT buttons on your projector cabinet or your remote control to

correct the orientation. (See page E-27.)

Do not attempt to install the projector yourself.

•

Only use your projector on a solid, level surface. If the projector falls

to the ground, you can be injured and the projector severely dam-

aged.

•

Do not use the projector where temperatures vary greatly. The pro-

jector must be used at temperatures between 32˚F (0˚C) and 95˚F

(35˚C).

•

Do not expose the projector to moisture, dust, or smoke. This will

harm the screen image.

Ensure that you have adequate ventilation around your projector so

heat can dissipate. Do not cover the vents on the side or the front of

the projector.

E-12

Download from Www.Somanuals.com. All Manuals Search And Download.

Making Connections

NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most

cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.

* If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management software.

* If you accidentally hit the POWER button on the remote control, wait 60 seconds and then press the POWER button again to resume.

Connecting Your PC or Macintosh Computer

RGB signal cable (supplied)

To mini D-Sub 15-pin connector on the pro-

jector. It is recommended that you use a

commercially available distribution amplifier

Audio cable (not supplied)

if connecting a signal cable longer than the

supplied one.

IBM PC or Compatibles (Desktop type)

or Macintosh (Desktop type)

PHONE

NOTE: For older Macintosh,

use a commercially available

pin adapter (not supplied) to

connect to your Mac's video

port.

IBM VGAor Compatibles (Notebook type)

or Macintosh (Notebook type)

Connecting your PC or Macintosh computer to your projector will en-

able you to project your computer's screen image for an impressive pre-

sentation.

To connect to a PC or Macintosh, simply:

1. Turn off the power to your projector and computer.

2. Use the supplied signal cable to connect your PC or Macintosh to the

projector.

3. Turn on the projector and the computer.

4. If the projector goes blank after a period of inactivity, it may be caused

by a screen saver installed on the computer you've connected to the

projector.

E-13

Download from Www.Somanuals.com. All Manuals Search And Download.

To connect SCART output (RGB)

Before connections: An exclusive SCART adapter (ADP-SC1) and a

commercially available SCART cable are required for this connection.

1. Turn off the power to the projector and your video equipment.

2. Use the NEC ADP-SC1 SCART adapter and a commercially avail-

able SCART cable to connect the RGB input of your projector and a

SCART output (RGB) of your video equipment.

NOTE: Audio signal is not available for this connection.

3. Turn on the power to the projector and your video equipment.

4. Use the RGB button on the remote control to select the RGB input.

5. Press the MENU button on the remote control to display the menu.

Projector

RGB IN

Video equipment

such as DVD player

6. From the menu, select [Advanced] → [Signal Select RGB] → [Scart].

SCART is a standard European audio-visual connector for TVs, VCRs

and DVD players. It is also referred to as Euro-connector.

NOTE: The ADP-SC1 SCART adapter is obtainable from your dealer in Eu-

rope. Contact your dealer in Europe for more information.

To RGB IN

Commercially available Female

SCART cable

ADP-SC1

Connecting an External Monitor

Audio cable (not supplied)

LINE IN

PHONE

RGB signal cable (supplied)

RGB signal cable (not supplied)

You can connect a separate, external monitor to your projector to simul-

taneously view on a monitor the RGB analog image you're projecting.

To do so:

NOTE:

•

The RGB OUT connector outputs RGB signal during standby mode. When the

projector goes into standby mode, the image on an external monitor disap-

pears for a moment.

1. Turn off the power to your projector, monitor and computer.

•

When the projector is in the standby mode, the image may not be correctly

displayed while the cooling fans are running immediately after turning on or

off the power.

2. Use a 15-pin cable to connect your monitor to the RGB OUT (Mini D-

Sub 15 pin) connector on your projector.

•

Daisy chain connection is not possible.

3. Turn on the projector, monitor and the computer.

E-14

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Your DVD Player

RGB IN

Optional 15-pin-to-RCA

(female)

3 cable (ADP-CV1)

Component video RCA

3 cable

(not supplied)

Audio Equipment

DVD player

AUDIO IN

AUDIO OUT

Component

Cb Cr

Audio cable

(not supplied)

You can connect your projector to a DVD player with component output

or Video output. To do so, simply:

For a DVD player without component video (Y,Cb,Cr) output, use

common RCA cables (not provided) to connect a composite VIDEO

output of the DVD player to the Video Input of the projector.

1. Turn off the power to your projector and DVD player.

3. Turn on the projector and DVD player.

2. If your DVD player has the component video (Y,Cb,Cr) output, use a

commercially available component video cable (RCAX3) and the op-

tional 15-pin-to-RCA (female)

3 cable to connect your DVD player

to the RGB IN connector on the projector.

NOTE: Refer to your DVD player's owner's manual for more information about

your DVD player's video output requirements,

E-15

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Your VCR or Laser Disc Player

S-Video cable (not supplied)

Video cable (not supplied)

Audio equipment

VCR/ Laser disc player

AUDIO IN

AUDIO OUT

Audio cable

(not supplied)

S-VIDEO OUT

VIDEO OUT

Use common RCA cables (not provided) to connect your VCR, laser

disc player or document camera to your projector.

To make these connections, simply:

NOTE: Refer to your VCR or laser disc player owner's manual for more informa-

tion about your equipment's video output requirements.

NOTE: An image may not be displayed correctly when a Video or S-Video source

is played back in fast-forward or fast-rewind via a scan converter.

1. Turn off the power to the projector and VCR, laser disc player or

document camera.

2. Connect one end of your RCA cable to the video output connector on

the back of your VCR or laser disc player, connect the other end to

the Video input on your projector. Use an audio cable (not supplied)

to connect the audio from your VCR or laser disc player to your audio

equipment (if your VCR or laser disc player has this capability). Be

careful to keep your right and left channel connections correct for

stereo sound.

3. Turn on the projector and the VCR or laser disc player.

Connecting the Supplied Power Cable

Connect the supplied power cable to the projector.

First connect the supplied power cable's two-pin plug to

the AC IN of the projector, and then connect the other

plug of the supplied power cable in the wall outlet.

E-16

Download from Www.Somanuals.com. All Manuals Search And Download.

PROJECTING AN IMAGE (BASIC OPERATION)

This section describes how to turn on the projector and to project a

picture onto the screen.

2. Press the ENTER button to execute the selection.

Turning on the Projector

NOTE:

• The projector has two power switches: main power switch and POWER button

(POWER ON and OFF on the remote control)

• When plugging in or unplugging the supplied power cable, make sure that the

main power switch is pushed to the off[O] position. Failure to do so may cause

damage to the projector.

To turn on the main power to the projector, press the Main Power switch

to the ON position ( I ).

After this has been done, you can proceed to the menu operation.

If you want, you can select the menu language later. See "Language"

on page E-27.

NOTE: Immediately after turning on the projector, screen flicker may occur. This

is not a fault. Wait 3 to 5 minutes until the lamp lighting is stabilized.

When the Lamp mode is set to Eco, the Lamp indicator will light green.

If one of the following things happens, the projector will not turn on.

Before you turn on your projector, ensure that the computer or video

source is turned on and that your lens cap is removed.

Only after you press the ON/STAND BY button on the projector cabinet

or POWER ON button on the remote control for a minimum of 2 sec-

onds will the power indicator turn to green and the projector become

ready to use.

If the internal temperature of the projector is too high, the projector

detects abnormal high temperature. In this condition the projector

will not turn on to protect the internal system. If this happens, wait for

the projector's internal components to cool down.

When the lamp reaches its end of usable life, the projector will not

turn on. If this happens, replace the lamp.

If the lamp fails to light, and if the STATUS indicator flashes on and

off in a cycle of six times, wait a full minute and then turn on the

power.

Note on Startup screen (Menu Language Select screen)

When you first turn on the projector, you will get the Startup screen. This

screen gives you the opportunity to select one of the seven menu lan-

guages: English, German, French, Italian, Spanish, Swedish and Japa-

nese.

To select a menu language, follow these steps:

1. Use the SELECT G or H button to select one of the seven languages

for the menu.

E-17

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting a Source

Adjusting the Picture Size and Position

Place your projector on a flat level surface and ensure that the projector

is square to the screen.

Selecting the computer or video source

Using the Remote Control

Lift the front edge of the projector to center the image vertically.

If the projected image does not appear square to the screen then

use the Keystone feature for proper adjustment. See page E-19.

OFF

POWER

VIDEO

AUTO ADJ.

S-VIDEO RGB

Press any one of the RGB, VIDEO or

S-VIDEO buttons.

SELECT

PICTURE

ASPECT

HELP

FREEZE PIC-MUTE

MAGNIFY

VOLUME

Move the projector left to center the image horizontally on the screen.

Using the cabinet buttons

Press any one of the RGB,

VIDEO or S-VIDEO buttons.

NOTE: If no input signal is available, the projector will display a blue background

(factory preset).

Adjust the Tilt Foot

1. Lift the front edge of the projector.

Adjustable Tilt Foot Lever

Adjustable Tilt Foot

2. Push up the Adjustable Tilt Foot Levers on the right and left sides of

the projector to extend the adjustable tilt feet (maximum height).

3. Push down the Adjustable Tilt Foot Levers.

4. Lower the front of the projector to the desired height (max. 40mm/

1.6”) and release the Adjustable Tilt Foot Lever to lock the Adjust-

able tilt foot. There is approximately 10 degrees of up and down ad-

justment for the front of the projector.

E-18

Download from Www.Somanuals.com. All Manuals Search And Download.

CAUTION:

2. Turn off the Auto Keystone function.

Do not use the tilt-foot for purposes other than originally intended.

Misuses such as gripping the tilt-foot or hanging on the wall can

cause damage to the projector.

Zoom

Use the ZOOM lever to finely adjust the image size on the screen.

Use the SELECT H button to select “Image” and then press the

SELECT E button. The “Auto Keystone” will be displayed. Press the

SELECT E to select “Off”.

You can use the ZOOM lever to enlarge or reduce an image size.

Focus

Use the FOCUS ring to obtain the best focus.

3. Select the Keystone function.

Correcting the Vertical Keystone Distortion

Use the SELECT H button to select “Keystone”.

Auto Keystone Correction

The Auto Keystone correction feature will correct the vertical distortion

of a projected image on the screen. No special operation required. Just

put the projector on a flat surface.

Note that the vertical keystone angle can be corrected between 30 de-

grees upward and 30 degrees downward of projector tilt from level.

4. Correct the vertical distortion.

NOTE: Keystone correction angle could be less than 30 degrees for some sig-

Use the SELECT F or E button to correct the vertical keystone dis-

nals that have a high resolution or frequency such as UXGA.

tortion.

Manual Keystone Correction

You can also correct the vertical keystone distortion manually.

To do so:

1. Press the MENU button.

The menu will be displayed.

5. Press the MENU button to close the menu.

NOTE: You can save the changes using the Keystone Save feature when you turn

off the projector.

E-19

Download from Www.Somanuals.com. All Manuals Search And Download.

Optimizing RGB Picture Automatically

Turning off the Projector

OFF

POWER

VIDEO

AUTO ADJ.

Adjusting the Image Using Auto Adjust

To turn off the projector:

S-VIDEO RGB

Optimizing RGB image automatically

Press the Auto Adjust button to optimize an RGB image automatically.

First, press the POWER (ON/STAND BY) but-

ton on the projector cabinet or the POWER OFF

button on the remote control. The “Power Off /

Are you sure?” message will appear.

[Poor picture]

SELECT

PICTURE

ASPECT

HELP

FREEZE PIC-MUTE

MAGNIFY

AUTO ADJ.

VOLUME

Secondly, press the ENTER button or press

the POWER (ON/STAND BY) or the POWER

OFF button again.

The power indicator will glow orange.After the

projector turns off, the cooling fans keep op-

erating for 60 seconds (Cooling-off time).

Lastly, turn off the Main Power switch. The

power indicator will go out. Last unplug the

power cable.

[Normal picture]

CAUTION

Do not unplug the power cable from the

wall outlet or do not turn off the main power

under any one of the following circum-

stances. Doing so can cause damage to

the projector:

Press the Auto Adjust button to fine-tune the computer image or to re-

move any vertical banding that might appear and to reduce video noise,

dot interference or cross talk (this is evident when part of your image

appears to be shimmering). This function adjusts the clock frequencies

that eliminate the horizontal banding in the image. This function also

adjusts the clock phase to reduce video noise, dot interference or cross

talk. (This is evident when part of your image appears to be shimmer-

ing.)

•

While the Hour Glass icon appears.

•

While the cooling fans are running. (The

cooling fans continue to work for 60 sec-

onds after the projector is turned off).

This adjustment may be necessary when you connect your computer

for the first time.

NOTE:

• Some signals may not be displayed correctly or take time.

• The Auto Adjust function does not work for component and video signal.

• If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Clock

and Phase manually. See page E-28.

Turning Up or Down Volume

Sound level from the speaker and the AUDIO OUT jack (Stereo mini)

on the projector can be adjusted.

VOLUME

increase volume

decrease volume

E-20

Download from Www.Somanuals.com. All Manuals Search And Download.

CONVENIENT FEATURES

When using the USB Port

Using the Remote Mouse Function

The remote mouse function can only be used with a Windows 98, Win-

dows Me, Windows XP, Windows 2000 or Mac OS operating system.

The built-in remote mouse function enables you to operate your

computer's mouse functions from the remote control (Computer mode).

It is a great convenience for clicking through your computer-generated

presentations. To return to the projector operation mode (Projector mode),

press the PJ button (lit red).

USB port (PC)

Connecting to your computer for the remote mouse

function

If you wish to use the remote mouse function, use the supplied USB

cable to connect the USB port (PC) of the projector and the USB port

(type A) of your computer.

USB cable

(supplied)

USB port

NOTE: Depending on the type of connection or OS installed on your computer,

(Type A)

you may have to restart your computer or change your computer settings.

NOTE: Wait at least 5 seconds after disconnecting the USB cable before recon-

necting it and vice versa. The computer may not identify the built-in mouse re-

ceiver if it is repeatedly connected and disconnected in rapid intervals.

Switching operation mode between computer and projector

The three shaded buttons shown on the drawing work as a computer mouse in the Computer mode.

In the Computer mode the PJ button is not lit.

Works as a mouse for your computer.

Works as the SELECT button on the projector.

OFF

POWER

VIDEO

AUTO ADJ.

VIDEO

AUTO ADJ.

S-VIDEO RGB

Works as a right-click button

for your computer.

Works as the CANCEL

button on the projector.

SELECT

Not lit

Lit red

PICTURE

ASPECT

PICTURE

ASPECT

HELP

FREEZE PIC-MUTE

MAGNIFY

HELP

FREEZE PIC-MUTE

MAGNIFY

Works as the ENTER

button on the projector.

Works as a left-click

button for your com-

puter.

VOLUME

•

When the MENU button is pressed, the PJ button lights red to indicate that you are in the Projector mode, which allows the projector menu

operation using the three buttons.

If no buttons are pressed within 60 seconds, the PJ button's light goes out to indicate that you are in the Computer mode. To enable the projector

menu operation again, press the PJ button to light red.

When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode (not lit).

During Computer mode:

In Computer mode, by pressing the ENTER button for 2 seconds or more then releasing, the drag mode is set and the drag operation can be

performed simply by pressing the SELECT GHFE (mouse) button. To drop the item, press the ENTER (left click) button again or press the

CANCEL (right click) button.

E-21

Download from Www.Somanuals.com. All Manuals Search And Download.

Turning Off the Image and Sound

Getting the Information

Press the PIC-MUTE button to turn off the image and sound for a short

period of time. Press again to restore the image and sound.

You get the information about the signal and projector settings.

HELP

PIC-MUTE

SELECT

Display Information

Freezing a Picture

Press the FREEZE button to freeze a picture. Press again to resume

motion.

Exit Information

FREEZE

Enlarging and Moving a Picture

You can enlarge the picture up to 400 percent.

To do so:

1. Press the MAGNIFY (+) button to magnify the picture.

To move the magnified image, use the SELECT button.

MAGNIFY

SELECT

2. Return the image to the original size.

MAGNIFY

E-22

Download from Www.Somanuals.com. All Manuals Search And Download.

USING ON-SCREEN MENU

6. Repeat steps 2-5 to adjust an additional item, or press the MENU

button to close the menu.

Basic Menu Operation

Using the Menus

NOTE: The on-screen menu may not be displayed correctly while interlaced mo-

tion video image is projected.

1. Press the MENU button on the remote control or projector cabinet to

display the Menu.

2. Press the SELECT GH buttons on the remote control or the projec-

tor cabinet to highlight the menu for the item you want to adjust or

set.

3. Press the SELECT E button or the ENTER button on the remote

control or the projector cabinet to select a submenu or item.

4. Adjust the level or turn the selected item on or off by using SELECT

F or E buttons on the remote control or the projector cabinet.

The on-screen slide bar will show you the amount of increase or

decrease.

5. Changes are stored until you adjust it again.

CANCEL ........ Return to the previous screen.

E-23

Download from Www.Somanuals.com. All Manuals Search And Download.

List of Menu Items

Picture

Brightness

Contrast

Sharpness

Color

Hue

Picture Management

Presentation, Video, Movie, Graphic, sRGB

User

Base Setting

Presentation, Video, Movie, Graphic, sRGB

Brightness R,G,B Contrast R,G,B

White Balance

Gamma Correction Dynamic, Black Detail, Natural

Image

Auto Keystone

On, Off

Keystone

Keystone Save

Aspect Ratio

Cinema Position

On, Off

Normal, Wide Zoom, Cinema, Native

Setup

Lamp Mode

Normal, Eco

Language

English, German, French, Italian, Spanish, Swedish, Japanese

Color, Monochrome

Menu Color Select

Menu Display Time

Background

Manual, Auto 5 sec, Auto 15sec, Auto 45 sec

Blue, Black, Logo

Orientation

Desktop Front, Ceiling Rear, Desktop Rear, Ceiling Front

Advanced

Control Panel Key Lock

Power Management

High Speed Fan Mode

Signal Select RGB

Video

Enable, Disable

On, Off

RGB/Component, RGB, Component, Scart

Auto, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM

S-Video

Page2

Noise reduction

Auto Adjust

Vertical

Off, Low, High

On, Off

Horizontal

Clock

Phase

Information

Information (page1)

Information (page2)

Information (page3)

Source Index, Horizontal Frequency, Vertical Frequency, Sync Polarity

Signal Type, Video Type, Sync Type, Interlace

Remaining Lamp Time, Lamp Hour Meter, Filter Usage, Projector Usage

Default

Factory Default

Clear Filter Usage

Clear Lamp Hour Meter

Current Signal

All Data

NOTE: Some menu items are not available depending on the input source.

Download from Www.Somanuals.com. All Manuals Search And Download.

E-24

Menu Elements

Title

Slide bar

Radio button

Source

Highlight

Check mark

Solid triangle

Tab

Key symbol

Thermometer symbol

Menu windows or dialog boxes typically have the following elements:

Title .................... Indicates the menu title.

Highlight ............. Indicates the selected menu or item.

Source................ Indicates the currently selected source.

Solid triangle ...... Indicates further choices are available. A highlighted

triangle indicates the item is active.

Tab ..................... Indicates a group of features in a dialog box. Select-

ing on any tab brings its page to the front.

Radio button ....... Use this round button to select an option in a dialog

box.

Check mark ........ Indicates the item is selected.

Slide bar ............. Indicates settings or the direction of adjustment.

Key symbol ........ Indicates the Control Panel Key Lock is enabled.

Thermometer symbol ... Indicates the lamp mode is forcibly set to Eco mode

because the internal temperature is too high.

E-25

Download from Www.Somanuals.com. All Manuals Search And Download.

User Adjust (when using User )

When selecting user adjustable presetting (User), the submenu will

Menu Descriptions & Functions

be displayed.

You can customize each gamma or color. To do so, first select “User”

and press the ENTER button, and then proceed the following steps.

Picture

Selecting Base Setting

This feature allows you to use white balance or gamma values as

reference data to optimize for various types of images. You can se-

lect one of the following five settings.

• Presentation

• Video

• Movie

• Graphic

• sRGB

Adjusting White Balance <White Balance>

Adjusting Brightness, Contrast, Sharpness, Color, Hue and Picture

Management.

This allows you to adjust the white balance. Brightness for each color

(RGB) is used to adjust the black level of the screen; Contrast for

each color (RGB) to adjust the white level of the screen.

Brightness ...... Adjusts the brightness level or the back raster inten-

sity.

Selecting Gamma Correction Mode <Gamma>

Each mode is recommended for :

Dynamic ......... For true color reproduction of natural tones

Contrast ......... Adjusts the intensity of the image according to the

incoming signal.

Black Detail .... For dark portions of a picture

Natural ........... Normal settings

Sharpness ..... Controls the detail of the image for Video.

Color .............. Increases or decreases the color saturation level (not

valid for RGB).

Hue ................ Varies the color level from +/- green to +/-blue. The

red level is used as reference. This adjustment is only

valid for Video and Component inputs (not valid for

RGB).

Image

Picture Management

Enabling Auto Keystone <Auto Keystone>

This feature allows the projector to detect its tilt and correct vertical

distortion automatically.

To turn on the Auto Keystone feature, select “On”.

This option allows you to adjust neutral tint for yellow, cyan or ma-

genta.

There are 5 factory presets optimized for various types of images, or

you can set user adjustable settings.

Correcting Vertical Keystone Distortion Manually <Keystone>

You can correct vertical distortion manually from the menu.

You can save the changes using the Keystone Save feature when

you turn off the projector.

Presentation .. Recommended for making a presentation using a

PowerPoint file

Saving Vertical Keystone Correction <Keystone Save>

This option enables you to save your current keystone settings.

Saving your change once affects all sources. The changes are saved

when the projector is off.

Video ............. Recommended for regular picture such as TV pro-

gram

Movie ............. Recommended for movie

Graphic .......... Recommended for graphics

sRGB ............. Standard color values

User ............... User adjustable

NOTE: When “sRGB”, “Graphic”, “Video” or “Movie” is selected, the bright-

ness decreases slightly when compared to “Presentation”. This is not a mal-

function.

E-26

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting Aspect Ratio [ Aspect Ratio]

Selecting Lamp Mode [Lamp Mode]

Aspect Ratio allows you to select the best Aspect mode to display

your source image. You can also display the Aspect Ratio window by

pressing the “ASPECT” button on the remote control. (See page E-9).

When 4:3 is selected from the source (i.e. DVD player), the following

selections will display:

This feature enables you to select two brightness modes of the lamp:

Normal and Eco modes. The lamp life can be extended by using the

Eco mode.

Normal Mode ... This is the default setting (100% Brightness).

Eco Mode ...... Select this mode to increase the lamp life (80% Bright-

ness).

Normal

Wide Zoom

Cinema

Native

NOTE: Thermometer symbol indicates the lamp mode is forcibly set to Eco

mode because the internal temperature is too high.

Selecting Menu Language [Language]

Standard

4:3 Aspect

Left and right

stretched

Left and right

stretched

You can choose one of seven languages for on-screen instructions.

The options are: English, German, French, Italian, Spanish, Swed-

ish and Japanese.

When 16:9 is selected from the source (i.e. DVD player), the follow-

ing selections will display:

Selecting Menu Color [Menu Color Select]

You can choose between two color modes for menu color: color and

monochrome.

Normal

Wide Zoom

Cinema

Native

Selecting Menu Display Time [Menu Display Time]

This option allows you to select how long the projector waits after the

last touch of a button to turn off the menu.

The preset choices are “Manual”, “Auto 5 sec”, “Auto 15 sec”, and

“Auto 45 sec”. The “Auto 45 sec” is the factory preset.

16:9 image

displayed in

4:3 mode

Left and right

stretched

Left and right

stretched to

display the true

aspect

Selecting a Color or Logo for Background [Background]

Use this feature to display a black/ blue screen or logo when no sig-

nal is available.

Native (RGB only): Turns off the Advanced AccuBlend feature. The

projector displays the current image in its true resolution.

Selecting Projector Orientation [Orientation]

This reorients your image for your type of projection. The options

are:

desktop front projection, ceiling rear projection, desktop rear projec-

tion, and ceiling front projection.

NOTE:

* While you are displaying an image with higher resolution than the projector’s

native resolution, “Native” is not available.

* You can adjust image positions for Cinema. See “Cinema Position” for set-

ting image positions.

Please note that using this projector for the purpose of commercial gain or

the attraction of public attention in a venue such as a coffee shop or hotel and

employing compression or expansion of the screen image with a "Aspect

Ratio" setting may raise concern about the infringement of copyrights which

are protected by copyright law.

Advanced

Adjusting the Vertical Position of Image [Cinema Position] (for Cin-

ema only)

This feature adjusts the vertical position of the image when viewing

video with an aspect ratio selected.

When “Cinema” is selected in “Aspect Ratio”, the image is displayed

with black borders on the top and bottom.

You can adjust the vertical position between top and bottom.

NOTE: This option is available only when “Cinema” is selected in Aspect Ra-

tio.

Disabling the Cabinet Buttons [Control Panel Key Lock]

This option turns on or off the Control Panel Key Lock function.

Setup

NOTE:

* This Control Panel Key Lock does not affect the remote control and the PC

Control functions.

* When the cabinet buttons are disabled, pressing and holding the CANCEL

button for about 10 seconds will change the setting to enable.

* Key symbol

indicates the Control Key Lock is enabled.

Enabling Power Management [Power Management]

When this option is on and there is no input for five minutes or more,

the projector will automatically turn itself off.

Enabling High Speed Fan Mode [High Speed Fan Mode]

This option allows you to select two modes for fan speed: high-speed

mode and normal speed mode.

When you wish to cool down the temperature inside the projector

quickly, select “On”.

NOTE: Enable High Speed Fan mode if you continue to use the projector for

consecutive days.

E-27

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting Signal Format [Signal Select]

<RGB>

Adjusting Position/Clock (when Auto Adjust is off)

This allows you to manually adjust the image horizontally and verti-

cally, and adjust Clock and Phase.

Allows you to choose “RGB” for an RGB source such as a computer,

or “Component” for a component video source such as a DVD player.

Normally select “RGB/Component” and the projector automatically

detects a component signal. However there may be some compo-

nent signals that the projector is unable to detect. If this is the case,

select “Component”. Select “Scart” for the European Scart.

Adjusts the image location horizontally and vertically.

This adjustment is made automatically when theAutoAdjust is turned

on.

This feature enables you to select composite video standards manu-

ally. Normally select “Auto”.

When you select the video standard for Video and S-Video, select

the video standard from the pull-down menu.

This must be done for Video and S-Video respectively.

<Clock>

Use this item with the “Auto Adjust off” to fine tune the computer

image or to remove any vertical banding that might appear. This func-

tion adjusts the clock frequencies that eliminate the horizontal band-

ing in the image. This adjustment may be necessary when you con-

nect your computer for the first time. This adjustment is made auto-

matically when the Auto Adjust is turned on.

Page2

<Phase>

Use this item to adjust the clock phase or to reduce video noise, dot

interference or cross talk. (This is evident when part of your image

appears to be shimmering.)

Use “Phase” only after the “Clock” is complete.

This adjustment is made automatically when theAutoAdjust is turned

on.

Information

Selecting Noise Reduction Level

Select one of the three levels for reducing video noise: Off, Low, or

High.

NOTE: The lower the Noise Reduction level, the better the image quality by

way of higher video bandwidth.

Enabling Auto Adjust [Auto Adjust]

When “Auto Adjust” is set to “On”, the projector automatically deter-

mines the best resolution for the current RGB input signal to project

an image using NEC’s Advanced AccuBlend Intelligent Pixel Blend-

ing Technology.

Displays the status of the current signal and lamp usage. This item has

three pages. The information included is as follows:

[Page 1]

Source Index

Horizontal Frequency

Vertical Frequency

Sync Polarity

[Page 3]

The image can be automatically adjusted for position and stability;

“Horizontal Position”, “Vertical Position”, “Clock” and “Phase”.

On .................. Automatically adjusts image “Horizontal Position”,

“Vertical Position”, “Clock” and “Phase”.

Remaining Lamp Time (%)*

Lamp Hour Meter (H)

Filter Usage

Projector Usage

Off .................. User can adjust the image display functions (“Hori-

zontal Position”, “Vertical Position”, “Clock” and

“Phase”) manually.

* The progress indicator shows the

percentage of remaining bulb life.

The value informs you of the

amount of lamp usage. When the

remaining lamp time reaches 0,

the Remaining Lamp Time bar in-

dicator changes from 0% to 100

Hours and starts counting down.

If the remaining lamp time reaches

0 hours, the projector will not turn

on regardless of whether the lamp

mode is set to Normal or Eco.

[Page 2]

Signal Type

Video Type

Sync Type

Interlace

E-28

Download from Www.Somanuals.com. All Manuals Search And Download.

Default

Returning to Factory Default

The Factory Default feature allows you to change adjustments and set-

ting to the factory preset for source except the following:

Resets the adjustments for the current signal to the factory preset lev-

els.

The items that can be reset are: Brightness, Contrast, Color, Hue, Sharp-

ness, Aspect, Horizontal Position, Vertical Position, Clock, Phase and

Color Correction.

Reset all the adjustments and settings for all the signals to the factory

preset.

The items can be reset except Language, Lamp Remaining Time, Lamp

Hour Meter and Filter Usage. To reset the lamp usage time, see “Clear

Lamp Hour Meter” and “Clear Filter Usage”.

Resets the filter usage back to zero. Selecting this option displays

submenu for a confirmation.

Resets the lamp clock back to zero. Selecting this option displays

submenu for a confirmation.

NOTE: The projector will turn off and go into standby mode after 2100 hours (up

to 3100 hours in Eco mode) of service. If this happens, press the “Help” button

on the remote control for ten seconds to reset the lamp clock back to zero. Do

this only after replacing the lamp.

E-29

Download from Www.Somanuals.com. All Manuals Search And Download.

MAINTENANCE

This section describes the simple maintenance procedures you should

follow to replace the lamp and clean the filter.

3. Insert a new lamp housing until the lamp housing is plugged into the

socket.

CAUTION

Replacing the Lamp

Do not use a lamp other than the replacement lamp.

Order this from your dealer.

After your lamp has been operating for 2000 hours (up to 3000 hours in

Eco mode) or longer, the LAMP indicator in the cabinet will blink red

and the message will appear. Even though the lamp may still be work-

ing, replace it at 2000 (up to 3000 hours in Eco mode) hours to maintain

optimal projector performance.

Secure it in place with the two screws.

Be sure to tighten the screws.

CAUTION

•

DO NOT TOUCH THE LAMP immediately after it has been used.

It will be extremely hot. Turn the projector off, wait 60 seconds,

turn off the main power switch and then disconnect the power

cable. Allow at least one hour for the lamp to cool before han-

dling.

•

DO NOT REMOVE ANY SCREWS except the lamp cover screw

and two lamp case screws. You could receive an electric shock.

The projector will turn off and go into stand by mode after 2100

(up to 3100 hours in Eco mode) hours of service. If this hap-

pens, be sure to replace the lamp. If you continue to use the

lamp after 2000 hours (up to 3000 hours in Eco mode) of use,

the lamp bulb may shatter, and pieces of glass may be scat-

tered in the lamp case. Do not touch them as the pieces of glass

may cause injury. If this happens, contact your dealer for

lamp replacement.

4. Reattach the lamp cover.

Tighten the lamp cover screw.

Be sure to tighten the screw.

To replace the lamp:

1. Loosen the lamp cover screw until the screwdriver goes into a free-

wheeling condition and remove the lamp cover. The lamp cover screw

is not removable.

Catch

5. After you install a new lamp, select the menu → [Default] → [Clear

Lamp Hour Meter] to reset the lamp usage hours.

NOTE: When the lamp exceeds 2100 hours (up to 3100 hours in Eco mode)

of service, the projector cannot turn on and the menu is not displayed. If this

happens, press the Help button on the remote control for a minimum of 10

seconds while in standby mode. When the lamp time clock is reset to zero,

the LAMP indicator goes out.

2. Loosen the two screws securing the lamp housing until the screw-

driver goes into a freewheeling condition. The two screws are not

removable.

Remove the lamp housing by holding it.

NOTE: There is an interlock on this case to prevent the risk of electrical shock.

Do not attempt to circumvent this interlock.

Catch

Interlock

E-30

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Reinstall the new filter cover.

Cleaning

Cleaning or Replacing the Filter

The air-filter sponge keeps the inside of the projector from dust or dirt

and should be cleaned after every 100 hours of operation (more often in

dusty conditions). If the filter is dirty or clogged, your projector may over-

heat.

CAUTION

•

Turn off the projector, turn off the main power switch and un-

plug the projector before replacing the filter.

•

Only clean the outside of the filter cover with a vacuum cleaner.

Do not attempt to operate the projector without the filter cover.

NOTE: Do not wash the filter with soap and water. Soap and water will damage

the filter membrane. Before replacing the filter, remove dust and dirt from the

projector cabinet. Keep out dust and during filter replacement.

To clean the air-filter:

NOTE: When you replace the lamp, it is also wise to replace the filter. The filter

comes in the same package with your replacement lamp.

Vacuum the filter-through the filter cover.

Cleaning the Cabinet and the Lens

To reset the filter usage time, from the menu, select [Default] → [Clear

Filter Usage].

See also page E-29 for resetting the filter usage time.

To replace the filter (sponge):

1. Remove the filter cover by pushing up on the catch of the cover until

you feel it detach.

1. Turn off the projector before cleaning.

2. Clean the cabinet periodically with a damp cloth. If heavily soiled,

use a mild detergent. Never use strong detergents or solvents such

as alcohol or thinner.

Catch

3. Use a blower or lens paper to clean the lens, and be careful not to

scratch or mar the lens.

2. Gently peel off the filter (sponge) and replace it with the new one.

E-31

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

This section helps you resolve problems you may encounter while setting up or using the projector.

Power Indicator

Indicator Condition

Off

Projector Condition

Note

The main power is off

–

Blinking light

Steady light

Green blinking

0.5 sec ON,

0.5 sec OFF

0.5 sec ON,

0.5 sec OFF

The projector is getting ready Wait for a moment.

to turn on.

Orange blinking

The projector is cooling down. Wait for a moment.

Green

The projector is turned on.

The projector is in Standby.

–

Orange

Status Indicator

Indicator Condition

Off

Red blinking

Projector Condition

Note

Normal

–

Blinking light

1 cycle (0.5 sec ON, Lamp cover error or lamp Replace the lamp cover or

2.5 sec OFF)

housing error

lamp housing correctly.

The projector is overheated.

Move the projector to a cooler

location.

2 cycle (0.5 sec ON, Temperature error

0.5 sec OFF)

4 cycle (0.5 sec ON, Fan error

0.5 sec OFF)

Fans will not work correctly.

6 cycle (0.5 sec ON, Lamp error

0.5 sec OFF)

Lamp fails to light. Wait a full

minute and then turn on again.

The projector is re-firing.

Green blinking

Orange

Re-firing the lamp

Steady light

Control key locked

You have pressed control

panel key when Control Key

Lock is enabled.

Lamp Indicator

Indicator Condition

Projector Condition

Normal

Note

Off

–

Blinking light

Steady light

Red

Lamp has reached its end of Replace the lamp.

life. Lamp replacement mes-

sage will be displayed.

Red

Lamp has been used beyond Replace the lamp.

its limit. The projector will not

turn on until the lamp is re-

placed.

Green

Lamp mode is set to Eco mode

–

E-32

Download from Www.Somanuals.com. All Manuals Search And Download.

Common Problems & Solutions

Problem

Check These Items

Does not turn on

•

Check that the power cable is plugged in and that the power button on the projector cabinet or the remote

control is on. See pages E-16 and 17.

•

Ensure that the lamp cover or lamp housing is installed correctly. See page E-30.

Check to see if the projector has overheated or the lamp has reached the end of its usable life. If there is

insufficient ventilation around the projector or if the room where you’re presenting is particularly warm, move

the projector to a cooler location.

No picture

•

Use the RGB, Video or S-Video button on the remote control or the cabinet to select your source (RGB, Video

or S-Video). See page E-18.

•

Ensure your cables are connected properly.

Use menus to adjust the brightness and contrast. See page E-26.

Remove the lens cap.

Reset the settings or adjustments to factory preset levels using “Factory Default” in the menu. See page E-29.

Image isn’t square to the

screen

•

Reposition the projector to improve its angle to the screen. See page E-18.

Use the Keystone correction function to correct the trapezoid distortion. See page E-19.

Picture is blurred

•

Adjust the focus. See page E-19.

Reposition the projector to improve its angle to the screen. See page E-18.

Ensure that the distance between the projector and screen is within the adjustment range of the lens. See

pages E-11 and 12.

•

Condensation may form on the lens if the projector is cold, brought into a warm place and is then turned on.

Should this happen, let the projector stand until there is no condensation on the lens.

Image is scrolling verti-

cally, horizontally or

both

Use the RGB, VIDEO or S-VIDEO button on the remote control or the cabinet to select the source you want to

input.

Remote control does

not work

•

Install new batteries. See page E-10.

Make sure there are no obstacles between you and the projector.

Stand within 22 feet (7 m) of the projector. See page E-10.

Make sure that you are in the Projector mode and the PJ button lights in red. If not, press the PJ button. See

page E-21.

Indicator is lit or blink-

ing

•

See the Power/Status/Lamp Indicator on page E-32.

Cross color in RGB

mode

If Auto Adjust is off, turn it on or adjust the image manually with Horizontal / Vertical / Clock / Phase in the

Advanced menu. See page E-28.

E-33

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

This section provides technical information about the 8766 Projector's performance

Model Number

8766

Optical

LCD Panel

0.7" p-Si TFT active-matrix with Micro Lens Array

Resolution

Lens

1024

768 pixels native, up to UXGA

Manual zoom and focus:

F1.7 - 2.0 f=21.6 - 25.9mm

Lamp

200 W (160 W Eco mode)

Image Size

21 - 300 inches (0.5 - 7.6 m) diagonal

2.38 - 35.8 ft / 7.3 (Tele) - 10.9 m (Tele)

Tele : 9.5° - 10.0° Wide : 11.3° - 11.8°

+/- 30 degrees electronic (auto)

Projection Distance

Projection Angle

Keystone Correction

Electrical

Inputs

1 RGB/Component (D-Sub 15 Pin), 1 S-Video (DIN 4 Pin), 1 Video (RCA),

1 Stereo Mini Audio, 2 (L/R) RCA Audio, 1 PC Control (DIN 8 Pin)

Outputs

1 RGB (D-Sub 15 Pin), 1 Stereo Mini Audio

USB Port

1 B Type

Video Compatibility

NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, HDTV: 1080i, 1080i/50Hz, 720p, 576p, 480p, 480i/

60Hz

Scan Rate

Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 50 Hz to 120 Hz

RGB: 80 MHz (-3dB)

Video Bandwidth

Color Reproduction

Horizontal Resolution

16.7 million colors simultaneously, Full color

NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60: 550 TV lines

SECAM: 350 TV lines

YCbCr: 800 TV lines

RGB: dots (H)

768 dots (V)

External Control

Sync Compatibility

Built-in Speaker

Power Requirement

Input Current

RS232, IR

Separate Sync / Composite Sync / Sync on G

1W (monaural)

100 - 120V AC / 200 - 240V AC, 50 / 60 Hz

2.9A (100 - 120V AC) / 1.4A (200 - 240V AC)

7.5W in Standby mode / 260 W in Lamp Normal mode / 220 W in Lamp Eco mode

Power Consumption

Mechanical

Installation Orientation

Dimensions

Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear

12.2" (W)

3.5" (H)

9.1" (D)

310mm (W)

89mm (H)

230mm (D)

(not including protrusions)

Net Weight

6.5 lbs / 2.9 kg

Environmental Considerations

Operational Temperatures : 32° to 95°F (0° to 35°C), 20% to 80% humidity (non-condensing)

Storage Temperatures : 14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)

UL Approved (UL 60950, CSA 60950)

Regulations

Meets DOC Canada Class B requirements

Meets FCC Class B requirements

Meets AS/NZS3548 Class B

Meets EMC Directive (EN55022:1998, EN55024-1998, EN61000-3-2, EN61000-3-3)

Meets Low Voltage Directive (EN60950, TUV GS Approved)

For additional information visit:

http://www.dukcorp.com/av

The specifications are subject to change without notice.

E-34

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX

Cabinet Dimensions

89(3.5")

310(12.2")

Lens center

73.5(2.9")

Lens center

Unit = mm (inch)

Pin Assignments of D-Sub RGB Input Connector

Mini D-Sub 15 Pin Connector

Pin No.

RGB Signal (Analog)

YCbCr Signal

Red

15 14 13 12 11

Green or Sync on Green

Blue

Signal Level

Video signal : 0.7Vp-p (Analog)

Sync signal : TTL level

Ground

Red Ground

Cr Ground

Y Ground

Cb Ground

Green Ground

Blue Ground

No Connection

Sync Signal Ground

SCART Sync

Sync

Bi-directional DATA (SDA)

Horizontal Sync or Composite Sync

Vertical Sync

Data Clock

E-35

Download from Www.Somanuals.com. All Manuals Search And Download.

Compatible Input Signal List

Signal

Resolution

( Dots )

–

Frequency H.

( kHz )

Refresh Rate

( Hz )

NTSC

15.734

PAL

–

15.625

31.47

34.97

SECAM

VESA

–

640

480

640

480

640

480

640

480

640

480

640

480

640

480

640

480

640

480

720

350

720

400

720

350

720

400

800

600

800

600

800

600

800

600

800

600

832

624

1024

768

1024

768

1024

768

1024

768

1024

768

1024

768

1152

864

1152

870

1152

900

1152

900

1280

960

1280

1024

1280

1024

1280

1024

1280

1024

1280

1024

1280

1024

1400

1050

1920

1080

–

59.94

IBM

MAC

66.67

MAC

66.67

VESA

37.86

37.5

72.81

VESA

IBM

39.375

43.269

31.469

37.927

39.44

35.16

37.879

48.077

46.88

53.674

49.725

35.5

VESA

85.01

IBM

70.09

VESA

85.04

IBM

87.85

IBM

87.85

VESA

56.25

VESA

60.32

VESA

72.19

VESA

85.06

MAC

74.55

VESA

43 Interlaced

VESA

48.363

56.476

60.241

60.023

68.677

67.5

VESA

70.07

MAC

74.93

VESA

75.03

VESA

MAC

68.681

61.796

71.736

75.06

SUN

65.95

SGI

76.05

VESA

63.981

69.89

78.125

81.13

79.976

91.146

–

60.02

MAC

65.2

72.01

SUN

76.11

VESA

75.03

VESA

85.02

SXGA+

HDTV (1080p)

SDTV(576i)(625i)

SDTV(576p)(625p)

HDTV (1080i)(1125i)

HDTV (720p)(750p)

SDTV (480p)(525p)

VESA

–

67.5

15.6

–

31.5

1920

1080

1920

1080

1280

720

–

33.75

28.13

60 Interlace

50 Interlace

60 Progressive

59.94 Progressive

31.47

75.0

1600

1200

1600

1200

1600

1200

1600

1200

–

VESA

81.3

VESA

87.5

VESA

93.75

15.734

15.625

DVD YCbCr

59.94 Interlaced

50 Interlaced

–

# : Images in above flagged with # are compressed.

NOTE: Some composite sync signals may not be displayed correctly.

Signals other than those specified in the table above may not be displayed correctly. If this should happen, change

the refresh rate or resolution on your PC. Refer to Display Properties help section of your PC for procedures.

UXGA (1600

1200) is supported for separate sync signal only.

E-36

Download from Www.Somanuals.com. All Manuals Search And Download.

DUKANE CORPORATION

TWO-YEAR LIMITED WARRANTY

This Dukane projector is warranted to the original purchaser for a period of two (2) years from

the original purchase date – in normal operating conditions – against defects in material and

workmanship . DUKANE CORPORATION EXPRESSLY DISCLAIMS ALL OTHER

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

DURING THE WARRANTY PERIOD, DUKANE CORPORATION’S LIABILITY FOR ANY

DEFECTIVE PRODUCT (except for the lamp, which is subject to whatever warranties the

manufacturer may provide) IS LIMITED TO THE REPAIR OR REPLACEMENT OF

PRODUCT AT DUKANE CORPORATION’S OPTION. REPLACEMENT PRODUCTS MAY

BE NEW OR USED (used units will not exceed hours of defective unit). The following are not

covered by the limited warranty and Dukane Corporation shall not be liable for:

1. Any product which is not distributed in the U.S.A. or Canada by Dukane Corporation or an

authorized dealer.

2. Normal decrease in lamp light output over time.

3. Damage, deterioration or malfunction resulting from:

Accident, misuse, abuse, neglect, improper ventilation, fire, dust, smoke, water, lighting

or other acts of nature, unauthorized product modification, or failure to follow

instructions supplied with the product (including proper maintenance of air filters).

Repair or attempted repair by anyone other than a Dukane Corporation authorized service

center.

Any shipment of product (claims must be presented to the carrier).

Removal or installation of the product.

Any other causes which do not relate to a product defect.

Use of the product beyond normal operating conditions. Normal operating conditions are

defined as product use not in excess of 8 hours per day and 260 days per year.

4. Cartons, carry cases, shipping cases, batteries, or any accessories used in connection with the

product.

5. Service required as a result of third party components.

6. Product used as commercial rental units

Dukane corporation will pay labor and material expenses for covered items, but Dukane

Corporation will not pay for the following:

1. Removal or installation charges.

2. Cost of technical adjustment, set-up, maintenance, or adjustment of user controls.

3. Payment of shipping and related charges incurred in returning the product for warranty

repair.

Dukane Corporation disclaims all liability for incidental or consequential damage of any kind,

including all damages arising out of any interruptions in operation of the product and all damages

to software.

No person, firm, or representative is authorized to assume any obligation or to make any warranty

on behalf of the Dukane Corporation other than as stated above.

11595-B-04

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Visual Products

Dukane Corporation

Audio Visual Products Division

2900 Dukane Drive

St. Charles, IL 60174-3395

E-mail: [email protected]

Phone: (630) 762-4040

Orders: (800) 676-2485

Information: (800) 676-2486

Fax: (630) 584-5156

Parts & Service: (800) 676-2487

Fax: (630) 584-0984

401-8766-00

Download from Www.Somanuals.com. All Manuals Search And Download.

Code Alarm Automobile Alarm CA 430 User Manual
Craftsman Lawn Mower 917377542 User Manual
Creative MP3 Player FX200 User Manual
Cuisinart Mixer HSM 70 User Manual
Delta Electronics Power Supply Q48DV User Manual
Edelbrock Automobile Parts 1926 User Manual
Electro Voice Computer Monitor 1252 User Manual
EverFocus Car Video System EN 7517C User Manual
GE Monogram Ventilation Hood ZXR7510 User Manual
Generac Power Systems Switch R 200A User Manual