Dual Stereo System XD6320 User Manual

XD6320  
INSTALLATION/OWNERS MANUAL  
AM/FM/CD Receiver with Detach Face  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD6320 INSTALLATION  
Wiring Diagram  
FUSE  
When replacing the fuse,  
make sure new fuse is the  
correct type and amperage.  
Using an incorrect fuse  
could damage the radio.  
The XD6320 uses one  
10 amp ATM fuse located  
beside the wiring connector.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD6320 OPERATION  
Control Locations  
3
6
8
9
10  
1
2
4
5
7
22  
21 20 19  
18  
17  
16  
15  
14  
13 12 11  
Release  
Tuner Scan  
Local/Distance  
Preset 6  
1
2
12  
13  
14  
15  
16  
17  
18  
Power  
Volume  
3
Band/Play/Pause  
Mode  
Preset 5  
4
Preset 4  
5
Auto Store/Preset Scan  
Tune/Track Down  
Eject  
Preset 3/Intro  
Preset 2/Random  
6
7
8
19 Preset 1/Repeat  
20 Audio  
9
Tune/Track Up  
Display  
10  
11  
21  
22  
Loudness  
Mute  
EQ  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD6320 OPERATION  
General Operation  
Faceplate Removal Press RELEASE and pull away from the left side to remove.  
To re-install, insert right side of faceplate first then push  
left side to secure.  
Semi-permanent Remove trim ring and install supplied #1 x 7/32” Phillips  
Faceplate Installation head screw through left side of mounting frame into faceplate.  
Power On/Off Press POWER or any other button (except eject) to turn the  
unit on. Inserting a disc will turn the unit on automatically.  
Press POWER to turn the unit off.  
Mode Press MODE to select between tuner, CD player and auxiliary  
input. Modes of operation are indicated in the display.  
Loudness Press LOUD to activate and deactivate the loudness contour  
curve. Activating this feature will enhance the bass and  
treble frequencies when listening to music at low volumes.  
Volume Adjust volume using rotary encoder (00-46).  
Programmable Press and hold POWER for 3 seconds to program currently  
Turn-On Volume selected volume level. "P-VOL" and the current volume level  
will momentarily appear in the display.  
Preset EQ Curves Press EQ to select between POP, JAZZ, CLASSIC, BEAT, ROCK  
and OFF (default) equalization curves. Any adjustment to the  
Bass or Treble settings automatically cancels the current EQ  
curve (if one is selected).  
Display Press DISP to select between clock and radio frequency  
(tuner mode), clock and CD track/elapsed time (CD mode), or  
clock and AUX (AUX mode).  
Set the Clock With the unit on, press and hold DISP until the clock begins  
to flash, then release. Press TUNE  
to adjust the hours  
nn  
and TUNE  
to adjust the minutes. Press DISP  
ll  
momentarily to save the selected time.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD6320 OPERATION  
General Operation  
The clock will display 12-hour AM/PM time in USA frequency  
spacing mode (PM 10 00). In European frequency spacing  
12/24-hour Clock  
:
mode, the clock will display 24-hour time (22:00).  
In tuner mode, press and hold DISP then press TUNE  
to select function priority display. “FREQ” will momentarily  
appear in the display.  
Programmable Display  
Priority  
ll  
Note:  
"FUNC" will appear in CD or AUX modes.  
Radio frequency (tuner mode), CD track/elapsed time (CD  
mode) or AUX (AUX mode) will be displayed by default.  
Press and hold DISP then press TUNE  
to select time  
nn  
display priority. “TIME” will momentarily appear in the  
display. Clock will be displayed by default. Radio frequency  
or CD track/elapsed time accessed by pressing DISP  
momentarily.  
Programs unit to display clock/no clock when unit is off.  
Press and hold MODE then press PRESET 1 to select clock  
priority on/off. “CLK ON” or “CLK OFF” will momentarily  
appear in the display.  
Programmable Clock  
Priority  
Press and hold for more than 2 seconds to RESET the unit  
upon initial installation or if abnormal operation occurs.  
The reset button is located behind the faceplate.  
Reset  
Press and hold AUDIO for 3 seconds to turn confirmation  
beep on/off.  
Confirmation Beep  
Mute  
Press MUTE to silence the audio. “MUTE” will flash in the  
display. Press MUTE again to cancel.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD6320 OPERATION  
General Operation  
Audio Press AUDIO to select between Volume (default), Bass,  
Treble, Balance & Fader.  
Bass Press AUDIO until BAS appears  
Rotate encoder left/right to adjust  
( -6 minimum / +6 maximum)  
Treble Press AUDIO until TRE appears  
Rotate encoder left/right to adjust  
( -6 minimum / +6 maximum)  
Balance Press AUDIO until BAL appears  
Rotate encoder left/right to adjust  
(BAL L 12-BAL 00-BAL R 12)  
BAL 00 represents equal balance  
Fader Press AUDIO until FAD appears  
Rotate encoder left/right to adjust  
(FAD F 12-FAD 00-FAD R 12)  
FAD 00 represents equal fader  
Source Audio Memory Individual Bass and Treble settings are retained in memory  
for AM, FM, CD, and AUX modes. This allows you to save  
the Bass and Treble settings separately for each mode.  
Example:  
FM tuner mode can have Bass +3 and Treble -1 while CD  
mode can have Bass +2 and Treble +2.  
Note:  
Any adjustment to the Bass or Treble settings automatically  
cancels the current EQ curve (if one is selected).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD6320 OPERATION  
Tuner Operation  
Seek Tuning Press TUNE  
or TUNE  
next strong station.  
momentarily to seek the  
for more than 2 seconds,  
nn  
ll  
ll  
Manual Tuning Press TUNE  
or TUNE  
nn  
then release. "MANUAL" will momentarily appear in the  
display. Press TUNE  
or TUNE  
momentarily to  
nn  
ll  
move radio frequency up or down one step at a time. Press  
and hold to advance quickly. If tuning is not adjusted for 5  
seconds, the unit will return to seek tuning mode (default).  
"AUTO" will momentarily appear in the display.  
Scan Tuning Press SCAN to preview strong stations on the current band,  
pausing for 5 seconds at each. Press SCAN again to cancel.  
Local/Distance Press LOC to activate local tuning for strong station reception  
only. Press LOC again to cancel and resume distance tuning  
(default).  
Band Press BAND to select between FM1, FM2, FM3, AM1 and AM2  
bands.  
Frequency Spacing Press and hold BAND then press TUNE  
to select  
nn  
European frequency spacing. Press and hold BAND then  
press TUNE to select USA frequency spacing (default).  
ll  
Storing and Recalling Up to 18 FM stations and 12 AM stations can be stored. To  
Station Presets store a station, select the desired band and station. Press  
and hold the desired preset button (1-6) for more than  
2 seconds. When stored, the preset number will appear in  
the display. The station can be recalled anytime by pressing  
the corresponding preset button.  
Press AS/PS for more than 2 seconds to automatically store  
the six strongest stations in the current band. Automatic  
local/distance is activated during the initial band scan.  
Automatically Store  
Stations  
Press AS/PS for less than 2 seconds to scan presets 1-6 on  
the current band, pausing for 5 seconds at each. Press  
AS/PS again to cancel.  
Preset Scan  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD6320 OPERATION  
CD Player Operation  
With the label facing up, insert a standard size CD into the  
CD slot. The CD will automatically begin playback.  
Insert CD  
Eject CD  
Press EJECT to eject the CD. The unit will change to previous  
mode of operation (AM, FM, or auxiliary input). If the disc is  
not removed within 10 seconds, the unit will reload the disc.  
The unit does not have to be turned on to eject CD.  
Press TRACK  
Press TRACK  
track. Pressing TRACK  
to skip to the beginning of the next track.  
to return to the beginning of the current  
Track Select  
ll  
nn  
again skips to the beginning of  
nn  
the previous track.  
Press and hold TRACK  
or reverse a track.  
or TRACK  
to fast forward  
Fast Forward and Reverse  
ll  
nn  
Press  
Press  
/
/
II to temporarily stop CD playback.  
II again to resume playback.  
Pause  
Intro  
l
l
Press INT to play the first 10 seconds of each track.  
Press INT again to cancel.  
Press RPT to continuously repeat selected track.  
Press RPT again to cancel.  
Repeat  
Random  
Press RDM to play all tracks in random order. Press RDM  
again to cancel. Random mode is retained in memory when  
selecting between tuner, CD player and auxiliary input  
modes and when the unit is turned on/off.  
Some CD-Rs and CD-RWs may be incompatible with this  
unit, depending on media type and recording method. In  
addition, the following CDs may be incompatible with this  
unit:  
CD-R/CD-RW Compatibility  
CDs exposed to extreme temperatures or direct sunlight for  
extended periods of time, CDs recorded in which a recording  
session failed or a re-recording was attempted and, or  
encrypted or copy-protected CDs which do not conform to  
the audio CD-DA red book recording standard.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD6320 WARRANTY  
Limited One-Year Warranty  
This warranty gives you specific legal rights. You may  
also have other rights which vary from state to state.  
What to do?  
If purchased within the USA:  
1. Before you call for service, check your  
operating instruction booklet. A slight adjustment  
of any custom controls discussed in your  
instruction booklet may save you a service call.  
Dual Electronics Corp. warrants this product to the  
original purchaser to be free from defects in material  
and workmanship, under normal conditions, for a  
period of one year from the date of the original  
purchase.  
2. If you require service during the warranty  
period, you must carefully pack the product  
(preferably in the original package) and ship it by  
prepaid transportation with proof of the purchase  
date from the retailer to the Return Center  
address listed below.  
Dual Electronics Corp. agrees, at our option, during  
the warranty period, to repair any defect in material  
or workmanship or to furnish an equal new or  
renewed product in exchange without charges,  
subject to verification of the defect or malfunction and  
proof of the date of purchase.  
3. Please describe your problem in writing and  
include your name, a return UPS shipping  
address (P.O. Box not acceptable), and a daytime  
phone number with your shipment.  
During the One-Year Warranty Period: For One Year  
from the date of purchase, your product will be  
replaced with a new, renewed or comparable product  
(whichever is deemed necessary) if it becomes  
defective or inoperative. This is done without charge  
to you. Replacement products are warranted for the  
balance of the original warranty period.  
4. DUAL will pay the return shipping charges if  
the product is returned to an address within the  
48 contiguous states.  
Dual Electronics Corp.  
Attn: Returns Center  
21318 64th Ave. South  
Kent, WA 98032 U.S.A.  
Toll Free: 1-866-626-7863  
Who is covered? This warranty is extended to the  
original retail purchaser for products purchased and  
used in the U.S.A.  
What is covered? This warranty covers all defects in  
material and workmanship in this product. The  
following are not covered: installation/removal costs,  
damage resulting from accident, misuse, abuse,  
neglect, product modification, improper installation,  
incorrect line voltage, unauthorized repair or failure to  
follow instructions supplied with the product, or  
damage occurring during return shipment of the  
product.  
If purchased outside the USA:  
Please return the unit to original place of purchase  
for warranty service.  
Exclusion of Certain Damages: This warranty is  
exclusive and in lieu of any and all other warranties,  
expressed or implied, including without limitation the  
implied warranties of merchantability and fitness for  
a particular purpose and any obligation, liability, right,  
claim or remedy in contract or tort, whether or not  
arising from the company’s negligence, actual or  
imputed. No person or representative is authorized to  
assume for the company any other liability in  
connection with the sale of this product. In no event  
shall the company be liable for indirect, incidental or  
consequential damages.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD6320 OPERATION  
Specifications  
CD Player Signal-to-noise: >92dB  
Frequency response: 10Hz-20kHz  
Channel separation @ 1kHz: >65dB  
D/A converter: 1 Bit  
FM Tuner Tuning range: 87.5MHz-107.9MHz  
Usable sensitivity: 8.5dBf  
50dB quieting sensitivity: 10dBf  
Stereo separation @ 1kHz: 40dB  
Frequency response: 30Hz-13kHz  
AM Tuner Tuning range: 530kHz-1710kHz  
Usable sensitivity: 22uV  
Frequency response: 30Hz-2.2kHz  
General Total power output: 200 Watts Peak  
Power output: 50Wx4 @ 4 ohms, 14.4 VDC  
Operating voltage: 11-16 VDC, negative ground  
Speaker output impedance: 4~8 ohms  
Line output voltage: 2 Volts  
Dimensions: 7" x 7" x 2" (178 x 178 x 51 mm)  
Design and specifications subject to change without notice.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD6320 WARRANTY  
Troubleshooting  
Problem  
Cause  
Action  
Yellow wire not connected or incorrect voltage Check connections for proper voltage  
Unit will not turn on  
(no power)  
Red wire not connected or incorrect voltage  
Black wire not connected  
Fuse blown  
(11~16VDC)  
Check connection to ground  
Replace fuse  
Speaker wires not connected  
Check connections at speakers  
Unit has power  
(but no sound)  
One or more speaker wires touching each  
other or touching chassis ground  
Insulate all bare speaker wires from  
each other and chassis ground  
Yellow or red wire touching chassis ground  
Speaker wires touching chassis ground  
Incorrect fuse rating  
Check for pinched wire  
Check for pinched wire  
Use fuse with correct rating  
Unit blows fuses  
Unit is not mounted correctly or backstrap is Check mounting sleeve and backstrap  
not secure support  
Physical defect in media (CD, CD-R or CD-RW) Check media for scratches  
Excessive skipping  
Disc read error  
Press eject or RESET  
ERROR-01 appears  
on display  
Focus error or disc is in upside down  
CD mechanism position out of alignment  
CD transit screws still in place  
Press eject or RESET  
ERROR-02 appears  
on display  
Press EJECT for 3 seconds to reset  
CD mechanism position  
Remove 2 transit screws located on top  
of the unit  
Unit will not accept  
a disc  
Dual Electronics Corp.  
21318 64th Ave. South  
Kent, WA 98032  
Toll Free: 1-866-626-7863  
©2005 Dual Electronics Corp. All rights reserved.  
NSA0205-V01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Contec Universal Remote RT U49C User Manual
Creda Refrigerator 86102 User Manual
Cub Cadet Power Roller Timing Deck Striper Roller User Manual
Danby Dehumidifier APAC9036 User Manual
Elation Professional Work Light ELAR EXPAR User Manual
Electro Voice Portable Speaker Force 10 User Manual
Electro Voice Speaker S 40 User Manual
GBC Paper Shredder 1130S User Manual
General Dynamics Network Hardware LT 3600 User Manual
Global Machinery Company Heat Gun HG2000K User Manual