2
3
4
5
6
To program your TV / VCR combination unit...
1. First, program your remote as a TV
Reset
Pace
510 digital
Philips
digital
Pioneer
Voyager
1. Introduction
GE
005 019 027 031 037 041 046 051
004
017
Lets you reset your remote to its original default
settings. For more information, see section 17.
Your CheckMate™ IV (Model RT-U49C) universal
remote control is simple to program, easy to use, and
can operate up to four (4) devices, which include:
053 055 061 070 131
Gibralta
Goldstar(LG)
007 025 027 031 041 044 051 059
Following the steps in this section, find a TV Setup
Code that operates the TV functions of your TV /
060 065
3. Installing / Replacing Batteries
+
+
VCR (power, vol / – , mute, ch / – 0 – 9).
2. Then, program your remote as a VCR
007 027 031 041 044 059 060 065
Cable set-top terminals
Televisions
CABLE
TV
VIDEO
AUDIO
004
008
009
010
124
Install two (2) new “AA” batteries as indicated by the
diagram in the battery compartment.
BC-4600, BA-6000
BA-9000
Grundig
Hall Mark
Hitachi
Inkel
JC Penney
059
VCR, DVD
Following the steps in Section 6 for code number
programming, enter, lock and test each 3-digit
VCR Setup Code until a code is found that
operates the VCR functions of your TV / VCR
(play, stop, fast-forward, rewind, pause, record).
Note: You can not use the Point and PressTM
Programming method to program the VCR
functions of the TV / VCR.
041 051
Cassette deck, CD, receivers,
amplifiers, 2nd TV, 2nd VCR.
When the illuminated buttons become dim or do not
illuminate during use, install two (2) new “AA” size
batteries.
Your remote control has Memory GuardTM, which
eliminates reprogramming after battery changes.
BA-V1000, BA-V2000
007 027 049 051 083 085 098 100
075
Tocom
Before you can use your remote control, it must be
programmed (set-up) to operate the above devices.
005 010 027 037 041 051 065 069
5503VIP, 5507, 5508
011
070
Zenith
JVC
048 077 080 132
041 051
007
2. Before Getting Started
Z-Tac
012
013
Kawasho
KMC
Some of the special features and buttons on your
remote control are as follows:
MM2500
4. Programming Your Cable Set-Top Terminal
Oak
KTV
007 030 059 065
062
062
062
027 041 051
006 035 067
TM
TV Setup Codes
Point and Press Programming
Model RT-U49C is pre-programmed to operate
the Scientific-Atlanta Explorer , Pioneer Voyager
and Pace 510 digital set-top terminals.
Sigma One, P1, P2, P3
Sigma 2000
014
Kurazai
Lodgenet
Logik
Admiral
Adventura
Akai
058 061 062 067
Let’s you program your TV, VCR Audio devices
without codes. For more information, see sections
5, 6 and 7.
004
065
135
To operate a different cable set-top terminal, look up
the brand and model in the Cable Setup Code list. If
you are not sure of your brand and model, contact
your cable company.
Luxman
LXI
5. Programming Your TV
Aiwa
[
]
ALL
Amark
Ampro
007 086
If you have a TV that’s operated by remote control, it
is recommended that you plug it directly into a wall
outlet instead of the cable set-top terminal.
Magnavox(Philips) 001 005 007 014 026 027 041 052
068 081
Turns all of your devices on / off with one button
112
006
[
]
press. ALL can even be programmed to
automatically tune your TV to its correct output
channel. For more information, see section 8.
Amstrad
Anam
Majestic
Marantz
Megatron
Memorex
062
To program your cable set-top terminal...
088 089 093 111 120 125 134
003 065 076
086
To program your TV...
1. Turn on your cable set-top terminal.
AOC
065
[
] [
] [
]
Movies , Sports , News
1. Turn on your TV.
[
]
[
]
Audio Vox
Belcor
111
2. Press CBL , then SELECT together - hold both
010 031 062
[
]
Program your favorite channels on the “Movies”,
“Sports” and “News” buttons. For more information
see section 9.
buttons down until CBL illuminates.
041
MGA/Mitsubishi 003 027 031 041 044 051 065 076
[
]
[
]
2. Press TV , then SELECT together - hold both
Bell & Howell
Broksonic
Brokwood
Candle
062
084
3. From the Cable Setup Code list, locate and enter
the 3-digit code for your brand and model.
[
]
buttons down until TV illuminates.
011 054
Montgomery Ward 007 037 044 057 058 062 065 067
081
NEC
Orion
Panasonic
Philco
Philips(Magnavox) 001 005 007 014 026 027 041 052
068 081
Pilot
[
+]
[
]
041
3. a. Press and hold CH until your TV turns off.
VCR / VOD Toggle
[
]
[
]
4. Press CBL to lock in the code. The CBL
button will blink and go out.
[
+]
.
As soon as your TV turns off, release CH
027 052
023 027 031 044 101
“Toggles” the VCR buttons between cable Video-
On-Demand (VOD) and VCR / DVD functions. For
more information, see section 10.
Centurion
Citizen
044 051
013 017 033 045 047 078
018 019 021 024 053 063
001 007 027 052 065 081
OR
Write your cable set-top terminal brand & setup
code__________
027 052 059 062
b. From the TV Setup Code list, locate and enter
a 3-digit code for your brand. If multiple codes
are listed, you may have to enter several codes
until your TV turns off.
Concerto
Contec
041 051
TM
SmartKeys
020
Refer to section 16 for code number readback.
[
] [
]
Program multiple button presses on the CBL , TV
Coronado
Craig
007
[
]
Cable Setup Codes
and BYPASS buttons. For more information, see
134
041 059 097
section 15.
Motorola (General Instrument)
[
]
4. Press MUTE . If your TV turns back on, press
Crown
007
Pioneer
Portland
ProScan
Proton
056 103
[
]
[
]
[
]
DCT, CFT 2200
001
TV to lock in the code. The TV button will blink
and go out.
DEVICE
Curtis Mathes
Daewoo
044 061 062
007 027
CFT2100, CFT2000
002
027 039 040 041 042 051 090 091
055 061 073 082 112
Tells which device you are currently operating by
illuminating the device’s power button. While the
current device is illuminated, press a nonilluminated
power button to operate a different device.
092 094 101 102 108 114 118 121
031 126 128
If your TV does not turn back on, repeat steps 3
and 4 until you can turn your TV off and on .
Jerrold
003
❶
123 130
Pulsar
041
DL4, DP(V), DQN(V), DPBB
Daytron
Dumont
041 044 051
Quasar
Radio Shack
Realistic
RCA
019
Write your TV brand & setup code
.
Scientific Atlanta
Explorer
TM
041
041
Memory Guard
004
015
016
018
005
006
007
Refer to section 16 for code number readback.
Electro Home
Elektra
041 051
012 057 079
Eliminates reprogramming after battery changes.
Time Out
Shuts remote off if any button is pressed and held
for 45 seconds. This extends battery life in the
event the remote becomes lodges under or
between heavy objects.
Explorer(#, *)
Explorer(Blue Ridge)
Explorer(WorldGate™)
8600X
8600
8540, 70, 90
002
022 027 046 053 055 061 065 072
073 082
TM
❶
Note When using the Point and Press
Emerson
007 008 011 012 017 054 065 079
Programming method (step 3a). If you find a code
that turns your TV off but not back on (step 4),you
may have gone past the correct matching code. Try
108 110 131
041 051
010 028
004
Sampo
Samsung
Sanyo
031 044
Envision
Fisher
Funai
007 016 020 031 044 119 129
002 010 028 104 133
031 044 079
[
–]
pressing CH one press at a time until you find a
code that turns your TV back on.
Scott
Download from Www.Somanuals.com. All Manuals Search And Download.
13
14
15
16
17
18
TM
[
]
[
]
[
]
[
]
[
]
ALL
ALL devices on / off.
Cable set-top terminal on / off.
TV on /off.
The BYPASS button (cable mode) normally places
your Cable set-top terminal in a BYPASS mode.
While the cable set-top terminal is in its BYPASS
mode, you can record one program on your VCR
and watch a different program through your TV.
When exiting the cable set-top terminal’s BYPASS
mode, your TV must be re-tuned to its correct
output channel (typically 3) for proper cable
reception.
To operate your TV, press DEVICE , then TV . In
ALL
ALL devices on / off.
8. Programming the [
] Button
15. Your Remote’s SmartKeys
ALL
[
]
CBL
[
]
your remote’s TV mode, you can then press...
CBL
Cable set-top terminal on / off.
TV on /off.
Once you have programmed each of your devices,
[
]
TV
[
]
TV
Your remote has three SmartKeysTM CBL , TV ,
BYPASS that operate in its cable mode.
Each SmartkeyTM can be programmed so whenever
it’s pressed, it can transmit up to 12 individual button
presses in sequence.
[
]
([
] [
]
[
]
ALL
ALL devices on / off.
Cable set-top terminal on / off.
TV on /off.
VCR / DVD on / off.
Audio on / off.
Increases / decreases TV channel.
Numeric entry buttons.
Increases / decreases TV volume.
Mute TV volume.
press ALL to turn all of them on / off with a single
button press.
[
]
VIDEO
VCR / DVD on / off.
Audio on / off.
[
]
VIDEO
VCR / DVD on / off.
Audio on / off.
[
]
[
])
CBL
[
]
AUDIO
[
]
AUDIO
[ ]
TV
[
] [
]
–
+
CH / CH
Increases / decreases cable channel.
Increases / decreases cable volume.
Mute cable volume.
Exits on-screen menus, view guide,
interactive screens.
[
]
If you would like the ALL button to also tune
your TV to its correct output channel (typically 3)
follow these steps:
[
+] [ –]
CH / CH
Increases / decreases channel.
Enter channels.
Increases / decreases volume.
Mute volume.
[
]
[
] [
]
]
–
+
VIDEO
VOL / VOL
[ ] [ ]
0
9
[
[
]
MUTE
AUDIO
[
+] [ –]
VOL / VOL
[
]
EXIT
[
0
] [
9
]
–
+
CH / CH
[
]
[
]
[
]
1. Press DEVICE , then CBL to select the remote’s
cable mode.
MUTE
TM
[ ] [ ]
[
]
You can program the BYPASS SmartKeyTM so
automatically tune your TV to its correct output
channel.
Programming and using the CBL SmartKey
[
]
[
]
TV / VCR
Change VCR / DVD video inputs.
Rewind.
[
]
SETTINGS
Displays program settings.
Displays interactive program guide.
Displays channel, time information.
View favorite channels.
[
] [
]
]
–
+
VOL / VOL
[
]
]
]
]
]
]
[
]
[
]
The CBL button normally turns on / off your cable
set-top terminal.
You can program the CBL SmartkeyTM to turn on
your cable set-top terminal and TV, and tune your TV
to its correct output channel (typically 3) with one
button press.
GUIDE
[
]
[
]
2. Press SETTINGS , then ALL together - hold
[
MUTE
[
[
[
[
[
[
]
Play.
INFO
[
]
both buttons down until the TV illuminates.
[
]
TV / VCR
Change TV’s video inputs.
VCR / DVD rewind.
VCR / DVD play.
[
]
FAV
[
]
[
]
Fast-forward.
1. Press DEVICE , then CBL to select the remote’s
cable mode.
❶
❷
[
]
]
]
]
]
]
[
]
[ ]
[ ] ,
.
3. Press 0 , then 3
[
]
LAST
Last channel viewed.
Pause.
[
[
[
[
[
[
] [ ] [ ]
[
+]
[
]
A , B , C
On-screen decision buttons.
Numeric entry buttons.
4. Press CH to store the TV channel. The TV
Stop.
[
]
[
]
2.Press BYPASS , then SETTINGS together -
VCR / DVD fast-forward.
VCR / DVD pause.
[ ] [ ]
0
9
button will blink and go out.
Record.
[
]
hold both buttons down until CBL illuminates.
] [ ] [ ] [ ]
3. In this order, press BYPASS , DEVICE , TV , 0 ,
[
]
+ –
PAGE
Page up / down through menus,
program guide.
❶
Your TV output channel may also be 2 or 4.
If you are not sure, contact your cable operator.
VCR / DVD stop.
[
[
]
[
]
1. Press DEVICE , then CBL to select the remote’s
cable mode.
14. Programming Volume Control
[
] [ ] [ ] [
]
,
,
,
Navigate on-screen menus, program
guide, PPV events and interactive
services.
VCR / DVD record.
❶
[ ]
❷
[
]
3
,
. The CBL button will blink and remain
❷
Depending on your TV brand, the channel may
have to be entered as “3”, “03” or “003”.
When you first program your remote, volume /
mute are controlled through your TV(except
AUDIO which defaults to the AUDIO device).
illuminated.
[
]
[
]
2. Press CBL , then SETTINGS together - hold
both button down until CBL illuminates.
12. Operating Your Video(VCR or DVD) Device
[
]
SELECT
Select menu, interactive screen item.
Switch between cable set-top terminal
and TV.
[
]
[
+
]
[
]
4. Press CH to store the setting. The CBL
button will blink and go out.
[
]
Note : When pressing the ALL button, be sure to
keep the remote control aimed at the devices to
ensure all functions are received in their entirety.
[
]
BYPASS
Your remote control can operate many functions of
your VCR or DVD.
❶
❷
[
] [ ] [ ] [ ]
3.In this order, press CBL , TV , 0 , 3
,
.
The volume control options in each mode of the
remote are:
[
]
[
]
To return the BYPASS button to its normal function,
repeat steps 1 and 2 above, then press CH .
[
]
TV / VCR
Changes VCR video inputs.
The CBL button will blink and remain illuminated.
[
–]
[
]
To operate your VCR or DVD, press DEVICE
then VIDEO . In your remote’s Video, you can
[
]
9. Programming [ ]
], [
] [
MOVIES SPORTS NEWS
VCR / VOD
“Toggles” the VCR buttons between
cable Video-On-Demand (VOD) and
VCR / DVD functions.
[
+]
[
]
4.Press CH to lock in this setting. The CBL
button will blink and go out.
[
]
❶
CBL
TV (default), Cable or Audio.
TV (default), Cable or Audio.
TV (default), Cable or Audio.
Audio device (default), Cable or TV.
Your TV output channel may also be 2 or 4. If you
are not sure, contact your cable operator.
Each of these buttons can be programmed to store a
favorite cable channel.
then press...
TV
[
]
To return the CBL button to its normal function,
VIDEO
AUDIO
[
]
[
]
ALL
ALL devices on / off.
Cable set-top terminal on / off.
TV on /off.
VCR / DVD on / off.
Audio on / off.
Press VCR / VOD . If...
❷
Depending on your TV brand, the channel may
have to be entered as “3”, “03” or “003”
Note : When using any SmartKeyTM to transmit a
series of functions, be sure to keep your remote
aimed at the devices to ensure all functions are
received in their entirety.
[
]
[
–]
.
For example, to program the MOVIES button to
cable channel 53, follow these steps:
repeat steps 1 & 2, then press CH
[
]
CBL
[
]
a. CBL illuminates, the VCR buttons
are operating your cable Video-On
-Demond(VOD) functions.
TM
[
]
TV
[
]
Programming and using the TV SmartKey
To control volume / mute through your cable
set-top terminal in the remote’s cable mode...
[
]
[
]
[
]
1. Press DEVICE , then CBL to select the remote’s
VIDEO
[
]
The TV button normally turns on / off your TV.
cable mode.
[
]
AUDIO
OR
[
]
[
[
]
1. Press CBL , then SELECT together - hold both
You can program the TV SmartKeyTM to turn on your
TV and tune your TV to its correct output channel
(typically 3) with one button press.
[
]
+
[
]
–
CH / CH
Increases / decreases VCR channel.
Enter VCR channels.
Increases / decreases TV volume.
Mute TV volume.
[
]
[
]
[
]
2. Press CBL , then MOVIES together - hold both
[
]
b. VIDEO illuminates, the VCR
buttons are operating your VCR or
DVD functions.
]
buttons down until CBL illuminates.
[ ] [ ]
[
]
0 - 9
down until CBL illuminates.
[ ] [ ] [ ]
[
]
[
]
–
+
VOL / VOL
❶
[
+
]
[
]
2.Press VOL , then CBL for cable volume. The
3. Press 0 , 5 , 3 . (enter ch. # in 3-digit format) .
16. Code Number Readback
[
]
MUTE
[
]
CBL button will blink and go out.
[
]
[
]
[
]
[
]
[
]
[
]
4. Press MOVIES to store this channel. The CBL
1. Press DEVICE , then CBL to select the remote’s
cable mode.
While CBL or VIDEO is illuminated,
[
]
TV / VCR
Change VCR video inputs.
VCR / DVD rewind.
button will blink and go out.
[
]
To identify a 3-digit setup code stored under the
Point and PressTM method, follow these steps:
press VCR / VOD to switch from
Video-On-Demond to VCR or VCR to
Video-On-Demand.
To return volume control to your TV, repeat step 1,
then press VOL , then TV in step 2.
[
]
]
]
]
]
]
[
+
]
[
]
[
]
[
]
[
[
[
[
[
Programming the SPORTS or NEWS buttons is
VCR / DVD play.
[
]
[
]
2.Press TV , then SETTINGS together - hold both
the same general procedure as above.
VCR / DVD fast-forward.
VCR / DVD pause.
[
]
To identify the TV setup code...
buttons down until TV illuminates.
To control volume / mute through your cable
set-top terminal in the remote’s Video mode...
[
]
]
]
]
]
]
VCR / DVD or VOD rewind.
VCR / DVD or VOD play.
❶
May also be 4-digit (or 5-digit) format.
[
[
[
[
[
❶
❷
[
]
[
]
[
] [ ] [ ]
1.Press TV , then SELECT together - hold both
buttons down until TV illuminates.
3.In this order, press TV , 0 , 3
,
.
VCR / DVD stop.
The exact # of digits you need to enter depends
on how your cable operator has setup your
cable set-top terminal.
VCR / DVD or VOD fast-forward.
VCR / DVD or VOD pause.
VCR / DVD or VOD stop.
[
]
[
]
[
]
[
]
1. Press VIDEO , then SELECT together - hold
The TV button will blink and remain illuminated.
VCR / DVD record.
[
]
both bottons down until VIDEO illuminates.
[
]
[
]
[
+]
[
]
2. Press INFO The TV button wilblink back the
code numbers, with a 1-second interval between
each digit of the code.
4. Press CH to lock in this setting. The TV button
will blink and go out.
VCR / DVD or VOD record.
Programmable favorite channel.
Programmable favorite channel.
Programmable favorite channel.
[
+
]
[
]
13. Operating Your Audio Device
2. Press VOL , then CBL for Cable volume. The
10. Operating Your Cable Set-Top Terminal
[
]
]
MOVIES
[
]
VIDEO button will blink and go out.
[
]
To return the TV button to its normal function,
[
SPORTS
Your remote control can be setup to operate a tape
deck, CD, receiver, amplifier, 2nd TV, 2nd VCR as an
Audio device.
Your remote control is designed to operate all the
features and functions of your digital cable set-top
terminal.
[
–
]
Example : For code “035”, the remote will blink 10
times, then 3 times, then 5 times.
To return volume control to your TV, repeat step 1,
then press VOL , then TV in step 2.
[
]
repeat setps 1 and 2 above, then press CH
NEWS
[
+]
[
]
[
]
11. Operating Your TV
Programming and using the BYPASS
[
]
[
]
To operate your Audio device, press DEVICE ,
To identify the 3-digit Video code, press VIDEO ,
To operate your cable set-top terminal, press
TM
SmartKey
[
]
then AUDIO . In your remote’s Audio mode, you
can press...
[
]
[
]
then SELECT in step 1, then press INFO .
[
]
[
]
Your remote control can operate many functions of
your TV.
DEVICE , then CBL . In your remote’s cable
mode, you can then press...
Download from Www.Somanuals.com. All Manuals Search And Download.
19
[
]
To identify the 3-digit Audio code, press AUDIO ,
[
]
[
]
then SELECT in step 1, then press INFO .
Mfg
Model
Scientific Atlanta
8540,70,90
007
Mfg
Motorola (General Instrument)
Pioneer
Philips
Digital
017
17. Resetting Your Remote control
Explorer
(#, *)
015
DL4, DP(V),
M
Explorer
Explorer
BC-4600,
BA-V1000
BA-V2000
010
Explorer
004
Voyager
004
8600x
005
8600
006
Model
CFT2200,2100
002
DCT, CFT2200
001
BA-9000
009
(Blue Ridge)
(WorldGate™)
DQN(V), DPBB
003
BA-5000, BA-6000
To reset your remote control to its factory default
settings...
Setup Code
016
CBL
018
CBL
Setup Code
008
CBL
CBL
CBL
CBL
CBL
CBL
CBL
CBL
Device
CBL
CBL
CBL
CBL
Device
CBL
[
]
[
]
1. Press CBL , then SELECT together-hold both
[
]
down until the CBL illuminates.
All on
All on
All on
All on
All on
All on
All on
All on
All on
All on
ALL
All on
All on
All on
All on
ALL
All on
[
]
[
]
2. Press SETTINGS , then SETTINGS again. The
CBL on / off
TV on / off
Video on / off
Audio on / off
CBL on / off
TV on / off
Video on / off
Audio on / off
CBL on / off
TV on / off
Video on / off
Audio on / off
CBL on / off
TV on / off
Video on / off
Audio on / off
CBL on / off
TV on / off
Video on / off
Audio on / off
CBL on / off
TV on / off
Video on / off
Audio on / off
CBL on / off
TV on / off
Video on / off
Audio on / off
CBL on / off
TV on / off
Video on / off
Audio on / off
CBL on / off
TV on / off
Video on / off
Audio on / off
CBL on / off
TV on / off
Video on / off
Audio on / off
CABLE
TV
VIDEO
AUDIO
CBL on / off
TV on / off
Video on / off
Audio on / off
CBL on / off
TV on / off
Video on / off
Audio on / off
CBL on / off
TV on / off
Video on / off
Audio on / off
CBL on / off
TV on / off
Video on / off
Audio on / off
CABLE
TV
VIDEO
AUDIO
CBL on / off
TV on / off
Video on / off
Audio on / off
[
]
CBL button will blink and go out.
18. Helpful Tips and Troubleshooting
View Guide
Info
Guide
Info
Guide
Info
Guide
Info
Guide
Info
Guide
info
GUIDE
INFO
Guide
Info
Guide
Info
Guide
Info
GUIDE
INFO
1. Your remote is equipped with a Point and PressTM
Programming label on the back of its case. This
will help you quickly program the remote without
using codes.
Display
Menu
Display
Menu
Clock
Menu
Settings
Settings
Settings
Menu
Learn
Menu
Menu
SETTINGS
Settings
Settings
Menu
SETTINGS
2. An illuminated mode (power) button will remain
on whilethe remote is in a programming mode. In
the absence of an entry, the illuminated button will
go out after 45 seconds.
Sel
<
>
Sel
Select
<
>
Sel
<
>
Sel
<
>
Select/OK
<
>
Sel
Sel (Event)
OK
<
>
SELECT
<
>
Select
<
>
Sel
Select
<
>
Sel
<
>
SELECT
<
>
Cursor
Mute
Day >
< Day
AU
Prg
Page +
Page -
Day >
< Day
Day >
< Day
Page +
Page -
PC / PM
TCP
Page +
Page -
PAGE
PAGE
Page +
Page -
Page +
Page -
Page
Page
PAGE
PAGE
When locking in your devices, the illuminated
button will blink and go out,
3. When using the Point and PressTM programming
method, you may find a code that turns your
device off but not back on. If this happens...
Sleep
Mute
Timer
Mute
Mute
Mute
Exit
Mute
Exit
Mute
Exit
Mute
Exit
Mute
Del
Mute
Del
Mute
Exit
MUTE
EXIT
Mute
Exit
Mute
Exit
Mute
Exit
MUTE
EXIT
Mute
Clr
Vol +
Vol -
Ch +
Ch -
Vol +
Vol -
Ch +, Power on
Ch -, Power on
Vol +
Vol -
Ch +
Ch -
Vol +
Vol -
Ch +
Ch -
Vol +
Vol -
Ch +
Ch -
Vol +
Vol -
Ch +
Ch -
Vol +
Vol -
Ch +
Ch -
Vol +
Vol -
Ch +
Ch -
Vol +
Vol -
Ch +
Ch -
Vol +
Vol -
Ch +
Ch -
VOL +
VOL -
CH +
CH -
Vol +
Vol -
Ch +
Ch -
Vol +
Vol -
Ch +
Ch -
Vol +
Vol -
Ch +
Ch -
Vol +
Vol -
Ch +
Ch -
VOL +
VOL -
CH +
CH -
Vol +
Vol -
Ch +
Ch -
a.the correct code has not been found. Continue
[
+]
pressing CH until your devices turn on and
off.
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
Enter
F
Prog
Enter
F
Prog
A
B
C
Enter
Order
Clear
Order
Help
A
B
C
A
B
C
Str
Auth
#
OR
PPV
Buy
Buy
b.you may have gone past the correct matching
[
–]
code. Try pressing CH one press at a time
until you find a code that turns your devices turn
back on.
0, 1 - 9
Last
Fav
0, 1 - 9
Lch
Rcl
0, 1 - 9
Last
Fav
0, 1 - 9
Last
Fav
0, 1 - 9
Last
Fav
0, 1 - 9
Last
Fav
0, 1 - 9
0, 1 - 9
0, 1 - 9
Last Ch
Fav Ch
0, 1 - 9
Last
Fav
0, 1 - 9
LAST
FAV
0, 1 - 9
Last
Fav
0, 1 - 9
Last
Fav
0, 1 - 9
Last
Fav
0, 1 - 9
Last
Fav
0, 1 - 9
LAST
FAV
0, 1 - 9
Rcl
<
Ch
<
Ch
Fav
Fav
4.If the same button is pressed and held for 45
seconds, your remote control will turn itself off.
This extends the battery life by should the remote
become lodged under or between heavy objects.
Back
REW - Cable or Video
PLAY - Cable or Video PLAY - Cable or Video PLAY - Cable or Video
FF - Cable or Video FF - Cable or Video FF - Cable or Video
PAUSE - Cable or Video PAUSE - Cable or Video PAUSE - Cable or Video
STOP - Cable or Video STOP - Cable or Video STOP - Cable or Video
REC - Cable or Video
REW - Cable or Video
REW - Cable or Video
REW - Cable or Video
PLAY - Cable or Video
FF - Cable or Video
PAUSE - Cable or Video
STOP - Cable or Video
REC - Cable or Video
REW
PLAY
FF
PAUSE
STOP
REC
REW - Cable or Video
PLAY - Cable or Video
FF - Cable or Video
PAUSE - Cable or Video
STOP - Cable or Video
REC - Cable or Video
REW - Cable or Video
PLAY - Cable or Video
FF - Cable or Video
PAUSE - Cable or Video
STOP - Cable or Video
REC - Cable or Video
Prev
PC
Next
REW
PLAY
FF
PAUSE
STOP
REC
Fwd
Pause
REC - Cable or Video
REC - Cable or Video
5. For diagnostic functions on Motorola (GI) DCT
and CFT2200 cable set-top terminal, press
Bypass
TV / VCR (VCR)
VCR / VOD
Bypass
TV / VCR (VCR)
VCR / VOD
Bypass
TV / VCR (VCR)
VCR / VOD
Bypass
TV / VCR (VCR)
VCR / VOD
Bypass
TV / VCR (VCR)
VCR / VOD
A / B
TV / VCR (VCR)
VCR / VOD
A / B
TV / VCR (VCR)
VCR / VOD
A / B
TV / VCR (VCR)
VCR / VOD
P
BYPASS
TV / VCR
VCR / VOD
Bypass
TV / VCR (VCR)
VCR / VOD
Bypass
TV / VCR (VCR)
VCR / VOD
A / B
TV / VCR (VCR)
VCR / VOD
BYPASS
TV / VCR
VCR / VOD
C / R
TV / VCR (VCR)
VCR / VOD
[
]
+
[
]
SELECT INFO together.
TV / VCR (VCR)
VCR / VOD
TV / VCR (VCR)
VCR / VOD
TV / VCR (VCR)
VCR / VOD
6. If you have any questions concerning the operation
of your cable set-top terminal, contact your cable
operator.
Movies
Sports
News
Movies
Sports
News
#
CH Link
WEB
MALL
CH Link
WorldGate
Channel Memory
PPV/Lock
Help
Music/Enter
Movies
Sports
News
Movies
Sports
News
Movies
Sports
News
Movies
Sports
News
Movies
Sports
News
Movies
Sports
News
Movies
Sports
News
Movies
Sports
News
Movies
Sports
News
Movies
Sports
News
Channel Memory
PPV
*
Rev. 7/2001
© 2001, CONTEC CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
|