Dimplex Electronic Keyboard 6903950000 User Manual

PRACTICAL USER’S GUIDE  
FOR THE SAHARA FIREPLACE  
Model 6903950000 series  
CAT NUMBER:  
EWF-SS  
Quality checked by:  
Valued Customer,  
We are pleased that you have chosen to purchase an electric  
fireplace manufactured by Dimplex North America Limited.  
7208570100R04  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK REFERENCE GUIDE FOR THE SAHARA  
FIREPLACE  
1. Before using the Sahara fireplace verify:  
·
Are the circuit breakers for the unit  
on?  
·
Are the light bulbs loose? (to  
check, follow the instructions for  
replacing the light bulbs under the  
maintenance section of this  
manual)  
2. The heater may emit a slight, harmless  
odor when first used. This odor is a  
normal condition caused by the initial  
heating of internal heater parts.  
3. The information regarding the model of  
your unit can be found on the carton  
label or the rating plate. The rating plate  
is located on the side of the unit  
underneath the outer frame. The carton  
label is attached to the front surface of  
the carton.  
Serial Number Label  
Rating Label  
Serial NumberLabel  
Rating  
Label  
4. If you have any questions or concerns  
regarding the operation of your fireplace,  
contact Dimplex customer service at 1-  
888-DIMPLEX (1-888-346-7539).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INSTRUCTIONS  
RETAIN THIS USER’S GUIDE FOR FUTURE  
REFERENCE  
When using electrical appliances, basic precautions  
should always be followed to reduce the risk of fire,  
electric shock, and injury to persons.  
1. Read all instructions before using the Sahara  
fireplace.  
2. The heater is hot when in use. To avoid  
burns, do not let bare skin touch hot  
surfaces. The trim around the heater outlet  
becomes hot during heater operation. Keep  
combustible materials, such as furniture,  
pillows, bedding, papers, clothes, and  
curtains at least 3 feet (0.9m) from the front of  
the unit.  
3. Extreme caution is necessary when any  
heater is used by or near children or invalids  
and whenever the unit is left operating and  
unattended.  
4. Always unplug the Sahara fireplace when not  
in use.  
5. Do not operate with a damaged cord or plug,  
or if the heater has malfunctioned, or if the  
Sahara fireplace has been dropped or  
damaged in any manner. Return heater to  
authorized service facility for examination,  
electrical or mechanical adjustment, or repair.  
6. Do not use outdoors.  
7. The Sahara fireplace is not intended for use  
in bathrooms, laundry areas and similar  
indoor locations. Never locate heater where  
it may fall into a bathtub or other water  
container.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Do not run the cord under carpeting. Do not  
cover cord with throw rugs, runners, or the  
like. Arrange cord away from traffic area and  
where it will not be tripped over.  
9. To disconnect the unit, turn the controls off,  
then remove the plug from the outlet.  
10.Do not insert or allow foreign objects to enter  
any ventilation or exhaust opening as this  
may cause an electric shock or fire, or damage  
to the heater.  
11. To prevent a possible fire, do not block air intake  
or exhaust in any manner. Do not use on soft  
surfaces, like a bed, where openings may  
become blocked.  
12. All electrical heaters have hot and arching or  
sparking parts inside. Do not use in areas  
where gasoline, paint, or flammable liquids are  
used or stored or where the unit will be exposed  
to flammable vapors.  
13. Do not modify the Sahara fireplace . Use it only  
as described in this manual. Any other use not  
recommended by the manufacturer may cause  
fire, electric shock or injury to persons.  
14. To reduce the risk of electric shock, this  
appliance must be grounded.  
Avoid the use of an extension cord. Extension  
cords may overheat and cause a risk of fire. If  
you must use an extension cord, the cord must  
be No. 16 AWG minimum size and rated no  
less than 1875 watts.  
15. Do not burn wood or other materials in the  
Sahara fireplace.  
16. Do not strike the glass front.  
17. Always use a certified electrician should new  
circuits or outlets be required.  
18. Always use properly grounded, fused and  
polarized outlets.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
19. Disconnect all power supply before performing  
any cleaning, maintenance or relocation of the  
unit.  
20. When transporting or storing the unit and cord,  
keep in a dry place, free from excessive  
vibration and store so as to avoid damage  
21 If the power supply cord is damaged, it must be  
replaced by the manufacturer, its service agent  
or similarly qualified persons in order to avoid a  
hazard  
22 The heater must not be located immediately  
below a socket-outlet  
SAVE THESE INSTRUCTIONS  
NOTE: Procedures and techniques that are considered  
important enough to emphasize.  
CAUTION: Procedures and techniques which, if not carefully  
followed, will result in damage to the equipment.  
WARNING: Procedures and techniques which, if not  
carefully followed, will expose the user to the risk of fire,  
serious injury, illness or death.  
NOTE  
A 15amp, 120 volt circuit is required. A dedicated circuit is  
preferred but not essential in all cases. A dedicated circuit  
will be required if, after installation, the circuit breaker trips or  
the fuse blows on a regular basis when the heater is  
operating. Additional appliances on the same circuit may  
exceed the current rating of the circuit breaker.  
WARNING  
Ensure the power cord is not installed so that it is  
pinched or against a sharp edge and ensure that the  
power cord is stored or secured to avoid tripping or  
snagging to reduce the risk of fire, electric shock or  
injury to persons.  
Construction and electrical outlet wiring must comply  
with local building codes and other applicable  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
regulations to reduce the risk of fire, electric shock  
and injury to persons.  
Do not attempt to wire your own new outlets or  
circuits. To reduce the risk of fire, electric shock or  
injury to persons, always use a licensed electrician.  
WARNING  
The supplied mounting bracket is designed for  
use with Dimplex wall mounted fireplaces only.  
Improper use, or use for purposes other than  
intended, may cause damage or injury.  
SAHARA FIREPLACE  
INSTALLATION  
WARNING  
Failure to install the Sahara fireplace as instructed below may  
result in damage to the equipment and or may expose the  
user to the risk of fire, serious injury, illness or death.  
WARNING  
The Sahara fireplace requires the wall mounting bracket  
screws to be installed into a minimum of two wall studs.  
(FIGURE 1)  
1. Select an appropriate location to mount the  
unit on a wall, above an electrical outlet.  
The bottom of the unit must be a minimum  
of 12" above the floor (mounting bracket  
34" above the floor). Access to the  
electrical outlet must be maintained. Ensure  
the installation meets the national and state/  
provincial electrical codes.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figure 1  
NOTE: It is recommended that the bottom of the  
unit not be mounted higher than 40" from the  
ground (mounting bracket no higher than 62").  
WARNING  
Ensure the front of the installed unit will be at least 3  
feet (0.9m) from combustible materials, such as  
furniture, pillows, bedding, papers, clothes, and  
curtains.  
2. The wall-mounting bracket must be mounted  
to at least two wall studs. Studs should be  
accessed through two wall-bracket holes in  
one of the following combinations: A&F,  
B&D, or C&E (FIGURE 2).  
Figure 2  
NOTE: Wall anchors must be installed in the  
appropriate wall locations to fasten the wall bracket  
through the remaining holes (Figure 4). For  
example, if you plan to secure the bracket to studs  
through holesA&F, install anchors centered on  
holes B, C, D, and E.  
3. Hold the wall-mounting bracket on the wall and  
mark the location of ONE of the mounting holes.  
4. Place the bubble level onto the top of the wall-  
mounting bracket.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Adjust the wall-mounting bracket so the bubble  
on the level is centered between the two black  
lines.  
6. Mark 5 other mounting screw locations, on the  
wall, ensuring that the wall bracket stays level.  
7. Install the supplied wall anchors on the marked  
locations by placing a #2 phillips screwdriver  
into the recess of the anchor. Press the anchor  
into the wall in the desired marked position  
while turning the anchor clockwise until it is flush  
with the wall  
9. Insert the wall anchor screws through the wall  
bracket and thread into the wall anchors.  
Tighten the screw. (FIGURE 4)  
10.Install the remaining screws through the bracket  
and into the wall studs as required.  
Note: At least two of the mounting screws  
must be installed into a wall stud.  
Wall Anchor  
Screw  
Wall Bracket  
Figure 4  
11. Remove glass assembly (Figure 5).  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
3
1
15.  
Figure 5  
12. Mount the unit on the wall as shown (Figure 6).  
Wall Bracket Supports  
Wall Bracket  
Figure 6  
13. Fix the unit in place by inserting 2 screws through 2 of  
the 4 available back panel holes, and into the wall studs. If  
studs are unattainable please use wall anchors. (Figure 7).  
Figure 7  
Panel Mounting Holes  
17.Replace glass assembly.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
The controls are located on the bottom surface of the Sahara  
fireplace on the right side.  
Front View  
Control Location  
Figure 8  
Bottom View  
C
A B  
A. MAIN ON/OFF SWITCH  
The switch has two ON positions marked with  
and “Manual”.  
The “Manual” position is for manual operation. In  
this position the built-in remote control is by-passed.  
The  
position is for operating the unit with the  
provided remote control.  
When in  
position the unit is operated with the  
ON and OFF buttons of the remote control.  
When the switch is in the center position the unit is  
off.  
B. HEATER ON SWITCH  
The HEAT ON/OFF SWITCH supplies power to the  
heater fan and the heater element. When the switch  
is in the ON position the heater operates if the  
thermostat calls for heat.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
C. HEATER THERMOSTAT CONTROL  
To adjust the temperature to your individual  
requirements, turn the thermostat control clockwise  
all the way to turn on the heater. When the room  
reaches the desired temperature, turn the  
thermostat knob counter clockwise until you hear a  
click. Leave in this position to maintain the room  
temperature at this setting. For additional heat, turn  
clockwise until you hear the click again and the  
heater will turn on.  
RESETTING THE  
TEMPERATURE CUTOFF  
SWITCH  
Should the heater overheat, an automatic cut out will  
turn the heater off and it will not come back on  
without being reset. It can be reset by switching the  
MAIN ON/OFF SWITCH to OFF and waiting 5  
minutes before switching the unit back on.  
CAUTION  
If you need to continuously reset the heater, unplug  
the unit and call Dimplex customer service at 1-888-  
DIMPLEX (1-888-346-7539).  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE OPERATION  
The Fireplace is supplied with an integrated on/off  
remote control  
Note: Ensure that the fireplace 3 position  
switch is set to the remote Control setting. (Up  
position)  
To operate, push the ON button to turn fireplace on,  
push the OFF button to turn the fireplace off.  
BATTERY REPLACEMENT  
To replace the battery, slide battery cover open on  
the hand held transmitter. Correctly install one 12  
volt (A23) battery in the battery holder.  
Close the battery cover.  
ON BUTTON  
OFF BUTTON  
BATTERY  
BATTERY  
COVER  
Figure 9  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
WARNING  
Disconnect power before attempting any  
maintenance or cleaning to reduce the risk of fire,  
electric shock or damage to persons.  
LIGHT BULB REPLACEMENT  
Allow at least 5 minutes for light bulbs to cool before  
touching bulbs to avoid accidental burning of skin.  
Light bulbs need to be replaced when you notice a  
dark section of the flame or when the clarity and  
detail of the log exterior disappears. There are two  
bulbs under the log set which generate the flames  
and embers.  
TOOL REQUIREMENTS  
-None  
HELPFUL HINTS  
It is a good idea to replace all light bulbs at one time  
if they are close to the end of their rated life. Group  
replacement will reduce the number of times you  
need to open the unit to replace light bulbs.  
LOWER LIGHT BULB REQUIREMENTS  
Quantity of 3 – 60W Chandelier or candelabra bulbs  
with E-12 (small) socket base, 120 Volt.  
DO NOT EXCEED 60-WATTS PER  
BULB.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BULB REPLACEMENT INSTRUCTIONS:  
1. Unplug the unit from the outlet.  
2. Remove glass assembly as shown in figure 5.  
3. Reach in and turn the burnt-out bulb(s) (or all  
bulbs) counter-clockwise to remove.  
4. Replace with new bulbs.  
5. Fit glass assembly back in place.  
6. Plug in the Sahara fireplace.  
GLASS CLEANING  
The front glass is cleaned in the factory during the  
assembly operation. During shipment, installation,  
handling, etc., the front glass may collect dust  
particles, these can be removed by dusting lightly  
with a clean dry cloth.  
To remove fingerprints or other marks, the glass can  
be cleaned with a damp cloth. The glass should be  
completely dried with a lint free cloth to prevent  
water spots. To prevent scratching, do not use  
abrasive cleaners or spray liquids on the glass  
surface.  
SAHARA FIREPLACE SURFACE CLEANING  
To remove fingerprints or other marks, the exterior  
finish can be cleaned with a damp cloth with a mild  
detergent. The surface should be completely dried  
with a lint free cloth to prevent water spots.  
To prevent scratching, do not use abrasive  
cleaners or spray liquids on any surface.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TWO YEAR LIMITED  
WARRANTY  
Products to which this limited warranty applies  
This limited warranty applies to the following models of your  
newly purchased Dimplex electric fireplace EWF-SS and to  
newly purchased Dimplex fireplace surrounds (mantels) and  
trims. This limited warranty applies only to purchases  
made in any province of Canada except for Yukon Territory,  
Nunavut, or Northwest Territories or in any of the 50 States  
of the USA (and the District of Columbia) except for Hawaii  
and Alaska. This limited warranty applies to the original  
purchaser of the product only and is not transferable.  
Products excluded from this limited warranty  
Light bulbs are not covered by this limited warranty and are  
the sole responsibility of the owner/purchaser. Products  
purchased in Yukon Territory, Nunavut, Northwest  
Territories, Hawaii, or Alaska are not covered by this  
limited warranty. Products purchased in these States,  
provinces, or territories are sold AS IS without warranty or  
condition of any kind (including, without limitation, any  
implied warranties or conditions of merchantability or  
fitness for a particular purpose) and the entire risk of as to  
the quality and performance of the products is with the  
purchaser, and in the event of a defect the purchaser  
assumes the entire cost of all necessary servicing or  
repair.  
What this limited warranty covers and for how long  
Products, other than fireplace surrounds (mantels) and trims,  
covered by this limited warranty have been tested and  
inspected prior to shipment and, subject to the provisions of  
this warranty, Dimplex warrants such products to be free from  
defects in material and workmanship for a period of 2 years  
from the date of the first purchase of such products.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimplex fireplace surrounds (mantels) and trims covered by  
this limited warranty have been tested and inspected prior to  
shipment and, subject to the provisions of this warranty,  
Dimplex warrants such products to be free from defects in  
material and workmanship for a period of 1 year from the date  
of first purchase of such products.  
The limited 2 year warranty period for products other than  
fireplace surrounds (mantels) and trims and the limited 1 year  
warranty period for fireplace surrounds (mantels) and trims  
also applies to any implied warranties that may exist under  
applicable law. Some jurisdictions do not allow limitations on  
how long an implied warranty lasts, so the above limitation  
may not apply to the purchaser.  
What this limited warranty does not cover  
This limited warranty does not apply to products that have  
been repaired (except by Dimplex or its authorized service  
representatives) or otherwise altered. This limited warranty  
does further not apply to defects resulting from misuse,  
abuse, accident, neglect, incorrect installation, improper  
maintenance or handling, or operation with an incorrect power  
source.  
What you must do to get service under this limited warranty  
Defects must be brought to the attention of Dimplex Technical  
Service by contacting Dimplex at 1-888-DIMPLEX (1-888-346-  
7539), or 1367 Industrial Road, Cambridge Ontario, Canada  
N1R 7G8. Please have proof of purchase, catalogue/model  
and serial numbers available when calling. Limited warranty  
service requires a proof of purchase of the product.  
What Dimplex will do in the event of a defect?  
In the event a product or part covered by this limited warranty  
is proven to be defective in material or workmanship during (i)  
the 2 year limited warranty period for products other than  
fireplace surrounds (mantels) and trims, and (ii) the 1 year  
limited warranty period for surrounds (mantels) and trims, you  
have the following rights:  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
§
Dimplex will in its sole discretion either repair or  
replace such defective product or part without  
charge. If Dimplex is unable to repair or replace  
such product or part, or if repair or replacement is  
not commercially practicable or cannot be timely  
made, Dimplex may, in lieu of repair or  
replacement, choose to refund the purchase price  
for such product or part.  
§
§
Limited warranty service will be performed solely  
by dealers or service agents of Dimplex authorized  
to provide limited warranty services.  
For products other than surrounds (mantels)  
and trims, this 2 year limited warranty entitles the  
purchaser to on-site or in-home warranty services.  
Accordingly, Dimplex will be responsible for all  
labour and transportation associated with repairing  
or replacing the product or part except as follows:  
(i) charges which may be levied for travel costs  
incurred to travel to the purchaser’s site where the  
product is located if the purchaser’s site is beyond  
30 miles (48 km) from the closest service depot of  
Dimplex’s dealer or service agent; and (ii) the  
purchaser is solely responsible for providing clear  
access to all serviceable parts of the product.  
§
For surrounds (mantels) and trims, this 1 year  
limited warranty does not entitle the purchaser to  
on-site or in-house warranty services. The  
purchaser is responsible for removal and  
transportation of the surrounds (mantels) and trims  
(and any repaired or replacement product or part)  
to and from the authorized dealer’s or service  
agent’s place of business. On-site or in-home  
services for surrounds (mantels) and trims may be  
performed at the purchaser’s specific request and  
expense at Dimplex’s then-current rates for such  
services. Dimplex will not be responsible for, and  
this limited warranty shall not include, any  
expense incurred for installation or removal of the  
surrounds (mantels) or trims or any part thereof (or  
any replacement product or part) including, without  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
limitation, all shipping costs and transportation  
costs to and from the authorized dealer’s or service  
agent’s place of business and all labour costs.  
Such costs shall be the purchaser’s responsibility.  
What Dimplex and its dealers and service agents are also  
not responsible for:  
IN NO EVENT WILL DIMPLEX, OR ITS DIRECTORS,  
OFFICERS, OR AGENTS, BE LIABLE TO THE  
PURCHASER ORANY THIRD PARTY, WHETHER IN  
CONTRACT, IN TORT, OR ON ANY OTHER BASIS, FOR  
ANY INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY,  
CONSEQUENTIAL, OR INCIDENTAL LOSS, COST, OR  
DAMAGE ARISING OUT OF OR IN CONNECTION WITH  
THE SALE, MAINTENANCE, USE, OR INABILITY TO USE  
THE PRODUCT, EVEN IF DIMPLEX OR ITS DIRECTORS,  
OFFICERS, OR AGENTS HAVE BEEN ADVISED OF THE  
POSSIBILITY OF SUCH LOSSES, COSTS OR DAMAGES,  
OR IF SUCH LOSSES, COSTS, OR DAMAGES ARE  
FORESEEABLE. IN NO EVENT WILL DIMPLEX, OR ITS  
OFFICERS, DIRECTORS, OR AGENTS BE LIABLE FOR  
ANY DIRECT LOSSES, COSTS, OR DAMAGES THAT  
EXCEED THE PURCHASE PRICE OF THE PRODUCT.  
SOME JURISDICTIONS DO NOTALLOW THE EXCLUSION  
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION  
MAY NOT APPLY TO THE PURCHASER.  
How State and Provincial law apply  
This limited warranty gives you specific legal rights,  
and you may also have other rights which vary from  
jurisdiction to jurisdiction. The provisions of the  
United Nations Convention on Contracts for the Sale  
of Goods shall not apply to this limited warranty or  
the sale of products covered by this limited warranty.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-888-DIMPLEX  
1-888-346-7539  
1367 Industrial Road  
Cambridge, Ontario  
Canada, N1R 7G8  
Approved for use in the United States and Canada  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Snow Blower 53688521 User Manual
Crate Amplifiers Musical Instrument Amplifier GFX 30 User Manual
Crate Amplifiers Musical Instrument Amplifier GTD15 User Manual
Curtis Flat Panel Television LCD1923A User Manual
Danby Refrigerator DWC1233BL SC User Manual
EdgeStar Beverage Dispenser TWR210EBL User Manual
EverFocus Car Stereo System EDR410H User Manual
Fagor America Convection Oven 5HA 196X User Manual
GE Answering Machine 55897990 User Manual
GE Monogram Oven ZSC1201 User Manual