™
®
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Delfield
UC4432N Mega Top
Reduced Height Front-Breathing Self-Contained
Compact Mega Top Refrigerators
Approved _______________________________
Date ____________________________________
Models
•
•
UC4432N-12M
Single section with doors twelve pan capacity
Single section with drawers twelve pan capacity
UCD4432N-12M
Options &
Accessories
Standard Features
•
•
Patented air screen ensures product stays cold without
drying it out
100% front breathing, which allows the unit to be
•
•
•
•
•
•
•
•
•
Flat lift off cover
pushed against
existing line up
a
wall or built into
a
cabinet or an
18” wide single tier overshelf
Stainless steel finish on back
Plastic laminate on front
Additional wire shelves
Door lock
•
•
Durable, rugged stainless steel sides, top and front
Features Delfield’s exclusive ABS interior (on sides).
ABS is extremely durable
-
it won’t dent, chip or
corrode and is backed by a limited lifetime warranty
Delfield supplies 1/6 size pans and adapter bars for
top opening
Mega top refrigerators are standard with 8” wide,
dishwasher safe polyethylene cutting board treated
with anitmicrobial agent
•
•
Exterior thermometer
Glass door(s)
•
“D” prefix models feature Delfield’s new drawer
system. Drawers are backed by a 10-year warranty on
the track assembly
*220V/50Hertzelectricalsystem
*Inclusion of this option will
alter electrical specifications
of the unit.
•
•
Environmentally friendly R404A refrigerant
High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP (Ozone
Depletion Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs low
Black recessed quick grip handle
•
•
Standard on 2” casters for easy cleaning and
installation
UC4432N-12M
•
•
•
7’ cord and plug supplied
Cord spring relief - prevents cord rollover
One epoxy coated wire shelf standard, installed per
door section
•
•
ACT solid state electronic control
One year parts and 90 day labor standard warranty.
Specifications
Exterior top is one-piece, 22-gauge stainless steel with
integral 2.12” (5.1cm) square nosing on the front. Top has two
openings to accept twelve 1/6-size 4” (10.1cm) or 6” (15.2cm)
deep pans or two 12” x 20” (30.5cm x 50.8cm) full size pans, 4”
(10.1cm) or 6” (15.2cm) deep. Adapter bars and 1/6 size pans
are supplied by Delfield. Telescoping cover is constructed
of 20-gauge stainless steel. Temperature in top opening to
maintain 33°F (1°C) to 41°F (5°C), with pans recessed 2.5”
are located on the interior rear wall of the cabinet. Refrigerant
flow is controlled by capillary tube. Cabinet maintains an
interior cabinet temperature of 36°F to 40°F (2°C to 4°C).
a
ACT control. ACT electronic, solid state control, mounted on
the exterior rear of the cabinet, allows unit to maintain precise
temperatures in heavy duty conditions.
Electrical connection is 115 volt, 60 Hertz, single phase. Unit
(6.4cm) at 86°F ambient room temperature, meeting NSF
7
has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.
requirements. One 32” x 8” x .5” (81.3cm 20.3cm 1.3cm)
polyethylene cutting board treated with antimicrobial agent is
mounted on the top at the front edge.
x
x
Casters: Equipment is mounted on 2” (5.08cm) diameter plate
casters with front two locking. Equipment clearance above the
floor is 2.5” (6.35cm).
Exterior back and bottom are two-piece 24-gauge galvanized
steel. Exterior ends are stainless steel.
Doors have
a
24-gauge stainless steel exterior, with
thermoformed ABS plastic interior liner. Cabinet has one
adjustable epoxy-coated wire shelf.
Interior sides are thermoformed ABS plastic with pilaster shelf
supports and clips. Base is fully insulated with high-density
foamed in place environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion Potential), Non GWP
(Global Warming Potential) polyurethane.
Drawers have 24-gauge stainless steel exterior with
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Top drawer will hold two 12” x 20”
(30.5cm x 50.8cm) pans 4”- 6” (10.1cm - 15.2cm) deep. Bottom
drawer holds two 12” x20” (30.5cm x 50.8cm) pans 4” (10.1cm)
deep. Pans are supplied by others.
Refrigeration system uses HFC-404A refrigerant. Compressor
is 1/5 H.P., with condenser coil and hot gas condensate
evaporator mounted on rear of the cabinet. Evaporator coils
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Fax: 800-669-0619
Phone: 800-733-8948 or 989-773-7981
Download from Www.Somanuals.com. All Manuals Search And Download.
|