LM-SM
ACCESSORY SHOCK MOUNT ADAPTER FOR LM-SERIES GOOSENECK MICROPHONE
he LM-SM shock-mount accessory
Fig. 1
Fig. 2
isolates a Crown LM-Series micro-
phone from mechanical noise
2.210 in.
(5.61 cm)
T
1.105 in.
(2.81 cm)
when mounted in a lectern, pulpit, or
table top. The rubber isolator is highly
stable and prevents theft by securely
holding the mic in place. Installation is
quick and easy.
LM-Series
Microphone
1.105 in.
(2.81 cm)
The LM-301A requires an LM-301SMA
shock mount adapter to work with the
LM-SM shock mount.
Wood Screws (4)
2.210 in.
(5.61 cm)
Installation
LM-SM
Shock Mount
1. To flush-mount the shock mount in the
lectern, make a center mark for a 23/4 inch
(6.985 cm)diameter hole.This will provide
adequate clearance for the shock mount.
.770 in.
(1.96 cm)
Locking Set Screw
.164 in.
(0.42cm)
XLR-Type Female
Cable Connector
2.703 in. Dia
(6.87 cm)
2. At the center mark, drill a 17/8 inch (4.763
cm) diameter hole to accept the LM-SM
shock mount.
.910 in.
(2.31 cm)
3. Using the four screws provided, screw the
LM-SM shock mount to the lectern.
1.274 in.
(3.24 cm)
1
-in. (4.763-cm) dia. Hole
in Mounting Surface
4. Adjust the microphone for the desired
height and tighten the set screw in the
LM-SM shock mount.
102005-3
5/02
1.033 in.
(2.62cm)
Download from Www.Somanuals.com. All Manuals Search And Download.
|