VTX200SH
Three-Channel Guitar Amp Head
with Stereo Digital Signal
Processing
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
VTX200SH Three-Channel Guitar Amp Head with Stereo DSP
Congratulations!
You are now the proud owner of the Crate VTX200SH three-channel guitar amp
head with Stereo Digital Signal Processing (DSP). This rugged amplifier combines out-
standing features with serious clean and distorted sounds. Dual DSP controls provide
15 “Must Have” effects and 15 Delay effects which can be combined for a wide variety
of sounds. The Tap/Save button allows you to manually set the tempo of many of the
effects and to save new DSP presets in the amplifier’s non-volatile memory. A sepa-
rate Reverb control adds even more to the array of effects. Channel switching and
DSP may be controlled by means of a footswitch, which also allows access to two DSP
presets on each of the three channels. Stereo and Mono Effects Loops allow you to
connect additional effects for even greater flexibility. The electronic tuner (with a Mute
switch for silent tuning) lets you get tuned and stay in tune any time the amplifier is on.
Like all Crate products, your VTX200SH amplifier is designed by musicians, and
built using only the best components. Extensive testing confirms that this amplifier is
the absolute best it can be.
In order to get the most out of your new amplifier, we strongly suggest that you read
the information contained in this guide before you begin playing.
CRATE
And thank you for choosing
.
CAUTION
PRECAUCION
ATTENTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RIESGO DE CORRIENTAZO
NO ABRA
RISQUE D'ELECTROCUTION
NE PAS OUVRIR
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOIS-
TURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PRECAUCION: PARA REDUCIR EL RIESGO DE INCENDIOS
O
DESCARGAS
LA
ATTENTION: PROTÉGEZ CET APPAREIL DE LA PLUIE ET DE L'HUMIDITÉ
AFIN D'ÉVITER TOUT RISQUE D'INCENDIE OU D'ÉLECTROCUTION. POUR
REDUIRE D'ELECTROCUTION NE PAS ENLEVER LE COUVERCLE. AUCUNE
PIECE INTERNE N'EST REPRABLE PAR L'UTILISATEUR. POUR TOUTE
REPARATION, S'ADRESSER A UN TECHNICIEN QUALIFIE.
ELECTRICAS, NO PERMITA QUE ESTE APARATO QUEDE EXPUESTO
A
LLUVIA
O
LA HUMEDAD. PARA DISMINUOIR EL RIESGO DE CORRIENTAZO.
NO ABRA LA CUBIERTA. NO HAY PIEZAS ADENTRO QUE EL USARIO PUEDO
REPARAR DEJE TODO MANTENIMIENTO A LOS TECHNICOS CALIFICADOS.
IMPORTANT SAFETY INSTRUCTIONS
•
•
READ, FOLLOW, HEED, AND KEEP ALL INSTRUCTIONS AND WARNINGS.
DO NOT OPERATE NEAR ANY HEAT SOURCE AND DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS. FOR PROPER OPERATION,
THIS UNIT REQUIRES 3” (75mm) OF WELL VENTILATED SPACE AROUND HEATSINKS AND OTHER AIR FLOW PROVISIONS IN THE CABINET.
•
•
•
DO NOT USE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS.
CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND DO NOT USE CLEANING AGENTS.
ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRICAL CODES AND COMPATIBLE WITH
VOLTAGE, POWER, AND FREQUENCY REQUIREMENTS STATED ON THE REAR PANEL OF THE APPARATUS.
•
•
•
PROTECT THE POWER CORD FROM DAMAGE DUE TO BEING WALKED ON, PINCHED, OR STRAINED.
UNPLUG THE APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.
ONLY USE ATTACHMENTS, ACCESSORIES, STANDS, OR BRACKETS SPECIFIED BY THE MANUFACTURER FOR SAFE OPERA-
TION AND TO AVOID INJURY.
•
•
•
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL.
OUR AMPLIFIERS ARE CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND PRESSURE LEVELS
CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED AND EAR PROTECTION IS RECOMMENDED IF UNIT IS
OPERATED AT HIGH VOLUME.
•
WARNING: THIS UNIT REQUIRES A SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRIC CODES HAVING THE LINE SUPPLY VOLTAGE,
POWER, AND FREQUENCY IDENTIFIED ON THE REAR OF THE UNIT. THE OUTLET MUST REMAIN ACCESSIBLE TO DISCONNECT THE UNIT IF A
FAULT SHOULD ARISE WHILE IN USE. THIS UNIT SHOULD BE UNPLUGGED WHEN NOT IN USE.
EXPLANATION OF GRAPHICAL SYMBOLS:
EXPLICACION DE SIMBOLOS GRAFICOS:
EXPLICATION DES SYMBÔLES GRAPHIQUES:
"IT IS NECESSARY FOR THE USER TO REFER TO THE INSTRUCTION MANUAL"
“ES NECESARIO QUE EL USUARIO SE REFIERA AL MANUAL DE INSTRUCCIONES.”
"REFERREZ-VOUS AU MANUAL D'UTILISATION"
"DANGEROUS VOLTAGE"
“VOLTAJE PELIGROSO”
"DANGER HAUTE TENSION"
=
=
3
Download from Www.Somanuals.com. All Manuals Search And Download.
VTX200SH Three-Channel Guitar Amp Head with Stereo DSP
The Front Panel:
1
2 3 4
5
6
7
8 9 10 11 12 13 14
LEVEL
GAIN
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
1
3
1
3
4
4
4
4
3
3
1
3
HIGH
MID
LOW
2
2
2
1
3
1
MUTE
POWER
1: POWER: Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom) of the switch
depressed. The switch illuminates when the power is on.
2: REVERB: Use this control to adjust the amount of the digital reverb effect. In its fully counter clock-
wise position the signal is “dry” (without any reverb). As you rotate the control clockwise the amount
of reverb increases. The Reverb setting may be saved as a channel preset - see page 8.
3: Tap/Save LED: This LED flashes in time with the tempo set by the Tap/Save button (#4) and
serves as a status indicator for certain DSP activities (see page 8).
4: Tap/Save: Use this pushbutton to set the tempo of many of the effects by tapping the button
repeatedly in time with the desired tempo. The Tap/Save button is also used to save DSP presets
and to restore the factory default DSP settings. Additional information about the Tap/Save button is
on pages 7 and 8.
5. DELAY: Use this control to select one of the fifteen digital delay effects. Complete information
about the DSP effects is on page 7.
6. EFFECTS: Use this control to select one of the fifteen digital effects. Complete information about
the DSP effects is on page 7.
7: TUNER: The electronic tuner is active whenever the amplifier is turned on, providing constant,
“real time” tuning. The bottom row of LEDs indicate which note (string) is being tuned. The top row
of LEDs provides directional queues to facilitate quick and precise tuning of your instrument. The
indicated note (string) is properly tuned when only the center LED is illuminated.
8: MUTE: This switch, when depressed, mutes the output signal at the speaker jacks and the effects
loops, allowing you to silently tune or switch instruments. The adjacent LED illuminates when the
Mute function is active.
CHANNEL 3 - Featuring a high gain FlexWave circuit for extreme distortion and sustain:
9: CHANNEL 3 SELECT: This switch, when depressed, selects Channel 3 as the active channel. The
adjacent LED illuminates when Channel 3 is active.
10: HIGH: Use this control to adjust the high frequency level of Channel 3.
11: LEVEL: Use this control to adjust the output level of Channel 3.
12: MID: Use this control to adjust the midrange frequency level of Channel 3.
13: GAIN: Use this control to adjust the amount of distortion produced by Channel 3.
14: LOW: Use this control to adjust the low frequency level of Channel 3.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
VTX200SH Three-Channel Guitar Amp Head with Stereo DSP
15 16 17 18 19 20
21 22 23 24 25 26
27
LEVEL
GAIN
LEVEL
GAIN
INPUT
2
1
HIGH
MID
LOW
HIGH
MID
LOW
STEREO
CHANNEL 2 - Featuring a medium gain FlexWave circuit for moderate distortion and crunch:
15: CHANNEL 2 SELECT: This switch, when depressed, selects Channel 2 as the active channel. The
adjacent LED illuminates when Channel 2 is active.
16: HIGH: Use this control to adjust the high frequency level of Channel 2.
17: LEVEL: Use this control to adjust the output level of Channel 2.
18: MID: Use this control to adjust the midrange frequency level of Channel 2.
19: GAIN: Use this control to adjust the amount of distortion produced by Channel 2.
20: LOW: Use this control to adjust the low frequency level of Channel 2.
CHANNEL 1 - Featuring a low gain FlexWave circuit for clean sounds or sounds with mild dis-
tortion:
21: CHANNEL 1 SELECT: This switch, when depressed, selects Channel 1 as the active channel. The
adjacent LED illuminates when Channel 1 is active.
22: HIGH: Use this control to adjust the high frequency level of Channel 1.
23: LEVEL: Use this control to adjust the output level of Channel 1.
24: MID: Use this control to adjust the midrange frequency level of Channel 1.
25: GAIN: Use this control to adjust the amount of distortion produced by Channel 1.
26: LOW: Use this control to adjust the low frequency level of Channel 1.
27: INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instrument
cable.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
VTX200SH Three-Channel Guitar Amp Head with Stereo DSP
The Rear Panel:
28 29 30 31 32
33
34
28: FOOTSWITCH: Use this jack to connect the footswitch cable (5-conductor midi cable) to the four-button
footswitch (supplied). This allows you to remotely switch between the channels, set tap tempos, save new presets,
and access a second set of DSP presets. (See page 9 for additional information.)
29: MONO EFFECTS LOOP SEND: When using a mono external effects processor, connect this jack to the input
jack of the effect by means of a shielded signal cable.
30: MONO EFFECTS LOOP RETURN: When using a mono external effects processor, connect this jack to the
output jack of the effect by means of a shielded signal cable.
31: STEREO EFFECTS LOOP SEND: When using a stereo external effects processor, connect this jack to the
input jack of the effect by means of a shielded three conductor signal cable terminated with a stereo (R/T/S) 1/4”
connector.
32: STEREO EFFECTS LOOP RETURN: When using a stereo external effects processor, connect this jack to the
output jack of the effect by means of a shielded three conductor signal cable terminated with a stereo (R/T/S) 1/4”
connector.
33: SPEAKER OUTPUTS: Use these jacks to connect the amplifier to your speaker(s) by means of speaker cables
with mono 1/4” plugs. The VTX200SH has two separate internal power amplifiers: one for the left channel, one for the
right. The two Left Speaker Output jacks are wired in parallel to each other, as are the two Right Speaker Output jacks.
Make certain the total impedance of your speakers does not go below four ohms per channel. Use the chart below to
help determine parallel loads. If in doubt, ask your dealer.
SPEAKER
IMPEDANCE
NUMBER OF
SPEAKERS (PAR)
TOTAL
IMPEDANCE
8 ohms
16 ohms
16 ohms
2
4
2
4 ohms
4 ohms
8 ohms
When using the stereo Chorus effect the right channel is dry and the left channel is detuned (wet). Each channel
will provide 70 watts RMS into an eight ohm load and 100 watts RMS into a four ohm load.
34: AC LINE CORD: This grounded power cord is to be plugged into a grounded power outlet, wired to current
electrical codes and compatible with the voltage, power, and frequency requirements stated on the rear panel. Do
not attempt to defeat the safety ground connection.
WARNING: The speaker output of this unit can exceed 10 Watts and could be a
shock injury. Connection to speakers should be performed by a skilled person in
compliance with local building codes. Class 2 wiring is required for speaker cables.
Use of external speakers outside the ratings stated at the speaker jack may result
in a shock injury or damage to the unit.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
VTX200SH Three-Channel Guitar Amp Head with Stereo DSP
The DSP Section:
REVERB
DELAY
EFFECTS
The VTX200SH features DSP controls
for Reverb, Delay and Effects. Complete
information about the Effects and Delay
controls is given below. The Delay con-
trol selects the delay or echo effects.
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
1
3
1
3
4
4
4
4
3
1
3
2
2
2
1
3
1
The Effects control selects the “pitch modified” and wah effects. Many of these effects
have their speed controlled by the Tap/Save button. All of these effects have their speed
controlled by the Tap/Save button. Additional information is provided on pages 5 and 10.
SIGNAL PATH FOR SPECIAL DELAY EFFECTS:
DELAY EFFECTS
SIGNAL PATH FOR ALL OTHER EFFECTS:
EFFECTS DELAY
DELAY:
NAME
Single 1
Single 2
Single 3
Single 4
Echo 1
Echo 2
Echo 3
DESCRIPTION
single delay w/low level
single delay w/medium level
single delay w/high level
single delay w/maximum level
echo delay w/low level
echo delay w/medium level
Tap/Save BUTTON CONTROLS:
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
delay time: .05 - 1 sec
n/a
echo delay w/high level
Echo 4
echo delay w/maximum level
stereo panning delay w/low level
stereo panning delay w/medium level
stereo panning delay w/high level
stereo panning delay w/maximum level
low echo delay w/effect on echo only
medium echo delay w/effect on echo only
high echo delay w/effect on echo only
bypass (dry signal - no effect)
Ping Pong 1
Ping Pong 2
Ping Pong 3
Ping Pong 4
Special 1
Special 2
Special 3
EFFECTS:
NAME
DESCRIPTION
stereo chorus w/low depth
Tap/Save BUTTON CONTROLS:
speed: 1 cycle/tap - period: .05 - 1 second
speed: 1 cycle/tap - period: .05 - 1 second
speed: 1 cycle/tap - period: .05 - 1 second
speed: 1 cycle/tap - period: .05 - 1 second
speed: 4 cycles/tap - period: .05 - 1 second
speed: 4 cycles/tap - period: .05 - 1 second
speed: 4 cycles/tap - period: .05 - 1 second
speed: 4 cycles/tap - period: .05 - 1 second
speed: 2 cycles/tap - period: .05 - 1 second
speed: 2 cycles/tap - period: .05 - 1 second
speed: 2 cycles/tap - period: .05 - 1 second
speed: 2 cycles/tap - period: .05 - 1 second
n/a
Chorus 1
Chorus 2
Chorus 3
Chorus 4
Flange 1
Flange 2
Flange 3
Flange 4
Phaser 1
Phaser 2
Phaser 3
Phaser 4
Oct-
stereo chorus w/medium low depth
stereo chorus w/medium high depth
stereo chorus w/high depth
flanger w/low depth
flanger w/medium low depth
flanger w/medium high depth
flanger w/high depth
phase shift w/low feedback
phase shift w/medium low feedback
phase shift w/medium high feedback
phase shift w/high feedback
adds signal one octave below original
medium phase w/touch sensitive wah
touch sensitive wah wah
Phase Wah
Wah
n/a
n/a
bypass (dry signal - no effect)
n/a
7
Download from Www.Somanuals.com. All Manuals Search And Download.
VTX200SH Three-Channel Guitar Amp Head with Stereo DSP
Storing Your Own Presets:
Each channel of the VTX200SH has two factory assigned DSP presets, as shown on
pages 10 and 11. No matter what the settings of the DSP controls, the preset is recalled
when a channel is selected. You may change the DSP settings by rotating the DSP con-
trols - these changes will remain active until a different channel is selected, but will not
be there for later use unless they are saved. To save a new DSP preset to a channel,
first make the desired DSP changes. Then press and hold the Tap/Save button for about
three seconds. The Tap/Save LED will flash through three quick sequences, indicating
the preset was saved. The new preset is stored for that channel and will remain in mem-
ory until a new preset is stored for that channel or the factory presets are restored.
We recommend making copies of page 14 of this guide for the purpose of writing down your own presets.
REVERB
DELAY
EFFECTS
REVERB
DELAY
EFFECTS
REVERB
TAP / SAVE
DELAY
EFFECTS
TAP / SAVE
TAP / SAVE
4
4
4
4
4
4
3
1
3
1
3
1
3
1
3
1
3
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
3
1
3
1
3
1
3
1
3
1
3
4
4
4
4
4
4
4
4
4
4
4
4
3
1
3
3
1
3
3
1
3
1
3
1
1
3
1
1
3
HOLD 3 SECONDS
PRESS SAVE
RELEASE
CHANGES ARE
SAVED AS
NEW PRESET
Restoring the Factory Presets:
The factory assigned DSP presets may be restored, erasing any changes you have
made. Turn the amplifier off. Press and hold the Tap/Save button as you turn the amplifi-
er on. The Tap/Save LED will flash through two quick sequences, indicating the factory
presets have been restored.
More About the Tap/Save Button:
The Tap/Save button is used to set the tempo of an effect by simply tapping it in time
to the desired tempo. The time between the taps sets the timing of the effect.
The Effects and the Delays may each have a different tap speed. The default “target”
for the Tap/Save button is the Delay control. To select the Effects control as the tap but-
ton’s target, rotate the Effects control. The Tap/Save tempo function will automatically
revert back to the Delay control 16 seconds after the Effects control is rotated, or when
the tap speed was last changed for the Effects control.
NOTE: In most cases, it is usually more pleasing to the ear to set a slower tap speed for the HI effects and
a faster tap speed for the LO effects.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
VTX200SH Three-Channel Guitar Amp Head with Stereo DSP
Using the Footswitch:
The special Crate four-button footswitch supplied with the VTX200SH performs a
variety of functions. The footswitch allows remote channel selection, remote Tap/Save
for each channel, and allows access to an additional DSP preset for each channel of
the amplifier. Use only the supplied Crate four-button momentary footswitch with the
VTX200SH. A standard 5-wire midi cable (supplied) may be used to connect the
footswitch to the amplifier.
When the footswitch is connected
to the amplifier, the first tap of but-
tons 1 - 3 select the corresponding
channel. Once a channel is selected,
consequent taps of the same button
produce the same results as tapping
the front panel Tap/Save button – you
can use the footswitch to store pre-
VTX200SH REAR PANEL
sets and set the tempo of an effect.
(See page 8.)
The “original” DSP presets are
active for each channel when the #4
5-Conductor
footswitch LED is illuminated. These
MIDI cable
are referred to as “DSP Bank ‘A’.”
When the #4 button is switched and
the LED is off, a second DSP preset
may be stored and recalled for each
channel - “DSP Bank ‘B’.”
FOOTSWITCH
NOTE: DSP Bank “B” pre-
1
2
3
4
sets are only accessible
when the footswitch is
connected to the amplifier.
When the footswitch is not
connected, only DSP Bank
“A” is accessible.
CH. 1 SELECT;
CH. 2 SELECT;
CH. 3 SELECT;
LED on: DSP BANK A
9
Download from Www.Somanuals.com. All Manuals Search And Download.
VTX200SH Three-Channel Guitar Amp Head with Stereo DSP
DSP Factory Presets:
The VTX200SH Factory Presets for the DSP section are as follows:
Factory Preset 1: Clean w/Chorus, Delay, Reverb
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
2
2
1
3
1
3
4
4
4
4
3
1
3
2
1
3
1
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo MEDIUM
TAP Tempo MEDIUM
Factory Preset 2: Rhythm w/Slapback Delay
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
2
2
1
3
1
3
4
4
4
4
3
1
3
2
1
3
1
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo FAST
TAP Tempo N/A
Factory Preset 3: Solo w/Flange, Delay, Reverb
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
2
2
1
3
1
3
4
4
4
4
3
1
3
2
1
3
1
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo MEDIUM
TAP Tempo MEDIUM
10
Download from Www.Somanuals.com. All Manuals Search And Download.
VTX200SH Three-Channel Guitar Amp Head with Stereo DSP
DSP Factory Presets:
The VTX200SH Factory Presets for the DSP section are as follows:
Factory Preset 4: Clean w/Reverb
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
2
1
3
1
3
4
4
4
4
3
1
3
2
2
1
3
1
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo N/A
TAP Tempo N/A
Factory Preset 5: Rhythm w/Reverb
REVERB DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
1
3
1
3
4
4
4
4
3
1
3
2
2
2
1
3
1
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo N/A
TAP Tempo N/A
Factory Preset 6: Solo w/Reverb
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
1
4
3
1
3
4
4
4
3
1
3
2
2
2
1
3
1
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo N/A
TAP Tempo N/A
11
Download from Www.Somanuals.com. All Manuals Search And Download.
VTX200SH Three-Channel Guitar Amp Head with Stereo DSP
Suggested Settings:
Tap Tempo: MEDIUM
Tap Tempo: MEDIUM
LEVEL
GAIN
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
"Oceanic"
Clean with
1
3
1
3
4
4
4
4
3
3
3
3
1
3
HIGH
HIGH
HIGH
HIGH
HIGH
HIGH
MID
LOW
2
2
2
1
3
1
Vibrato, Delay,
& Reverb
MUTE
(next page ----->)
Tap Tempo: FAST
Tap Tempo: N/A
LEVEL
GAIN
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
"Super Funk"
Clean with
1
3
1
3
4
4
4
4
3
1
3
MID
LOW
2
2
2
1
3
1
Wah, Delay,
& Reverb
MUTE
(next page ----->)
Tap Tempo: MEDIUM
Tap Tempo: N/A
LEVEL
GAIN
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
"Arena"
Rhythm with
Reverb & Delay,
1
3
1
3
4
4
4
4
3
1
3
MID
LOW
2
2
2
1
3
1
MUTE
(next page ----->)
Tap Tempo: N/A
Tap Tempo: MEDIUM
LEVEL
GAIN
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
"Haze Faze"
Rhythm with
Phase
1
3
1
3
4
4
4
4
3
3
3
3
1
3
MID
LOW
2
2
2
1
3
1
MUTE
& Reverb
(next page ----->)
Tap Tempo: N/A
Tap Tempo: N/A
LEVEL
GAIN
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
"Solo Wah"
Solo with
Wah, Delay
& Reverb
1
3
1
3
4
4
4
4
3
1
3
MID
LOW
2
2
2
1
3
1
MUTE
Tap Tempo: N/A
TAP TEMPO N/A
LEVEL
GAIN
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
"Octanator"
Solo with
Octave
1
3
1
3
4
4
4
4
3
1
3
MID
LOW
2
2
2
1
3
1
MUTE
& Reverb
12
Download from Www.Somanuals.com. All Manuals Search And Download.
VTX200SH Three-Channel Guitar Amp Head with Stereo DSP
Suggested Settings:
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
2
1
1
1
1
1
1
HIGH
MID
MID
MID
MID
MID
MID
LOW
LOW
LOW
LOW
LOW
LOW
HIGH
HIGH
HIGH
HIGH
HIGH
HIGH
MID
MID
MID
MID
MID
MID
LOW
LOW
LOW
LOW
LOW
LOW
2
HIGH
2
HIGH
2
HIGH
2
HIGH
2
HIGH
13
Download from Www.Somanuals.com. All Manuals Search And Download.
VTX200SH Three-Channel Guitar Amp Head with Stereo DSP
DSP “Fill in the Blanks” (for User Presets):
Copy this page to fill in your own DSP Presets!
User Preset:
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
1
3
1
3
4
4
4
4
3
1
3
2
2
2
1
3
1
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo _______
TAP Tempo _______
User Preset:
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
1
3
1
3
4
4
4
4
3
1
3
2
2
2
1
3
1
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo _______
TAP Tempo _______
User Preset:
REVERB
DELAY
EFFECTS
TAP / SAVE
4
4
3
1
3
1
2
2
2
2
1
3
1
3
4
4
4
4
3
1
3
2
2
2
1
3
1
CHANNEL:
1
2
3
BANK:
"A"
"B"
TAP Tempo _______
TAP Tempo _______
14
Download from Www.Somanuals.com. All Manuals Search And Download.
VTX200SH Three-Channel Guitar Amp Head with Stereo DSP
System Block Diagram:
TUNER
A BC D EF G
CHANNEL 1
FLEX
INPUT
WAVE
BUFFER
LEVEL
LEVEL
LEVEL
(LOW
GAIN)
INPUT
GAIN
GAIN
GAIN
HIGH MID LOW
HIGH MID LOW
HIGH MID LOW
CHANNEL 2
FLEX
WAVE
(MEDIUM
GAIN)
CHANNEL 3
FLEX
FOOTSWITCH
1
WAVE
2
3
4
(HIGH
GAIN)
MUTE
SWITCH
CONTROLLER
MONO EFFECTS LOOP
RETURN SEND
DSP
A/B
TAP/
POWER
AMP 2
SEND RETURN
SAVE
DSP
SPEAKER
OUTPUTS
RIGHT
(CHORUS
DRY)
STEREO EFFECTS LOOP
DAMPING
EFFECTS DELAY REVERB
POWER
AMP 1
SPEAKER
OUTPUTS
LEFT
(CHORUS
WET)
DAMPING
15
Download from Www.Somanuals.com. All Manuals Search And Download.
VTX200SH Three-Channel Guitar Amp Head with Stereo DSP
VTX200SH TECHNICAL SPECIFICATIONS:
Output Power Rating
70W per channel @5% THD, 8 ohm load
100W per channel @5% THD, 4 ohm load
Input Impedance
Total System Gain
470kΩ
Ch 1
Ch 2
Ch 3
74dB, all controls @10
88dB, all controls @10
103dB, all controls @10
Maximum Input Signal Accepted
5 volts peak-to-peak
Channel 1
Low Control
Mid Control
High Control
26dB range @ 70Hz
10dB range @ 900Hz
20dB range @ 10kHz
Channel 2
Low Control
Mid Control
High Control
26dB range @ 70Hz
10dB range @ 900Hz
20dB range @ 10kHz
Channel 3
Low Control
Mid Control
High Control
17dB range @ 100Hz
16dB range @ 1kHz
12dB range @ 7kHz
Power Requirements
Size and Weight
120 VAC, 60Hz, 95VA
100/115VAC, 50/60Hz, 95VA;
230VAC, 50/60Hz, 95VA
10” H x 30” W x 10.38” D, 37 lbs.
The VTX200SH is covered with a durable Tolex material: wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
@2005 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63133
47-773-01 • 070105
Download from Www.Somanuals.com. All Manuals Search And Download.
|