LIMITEDWARRANTY
If you purchased this product new in the U.S. or Puerto Rico, CORTELCO
warrants it against defects in material and workmanship for a period of one
(1) year from the date of original purchase. This warranty is in lieu of all other
express warranties. During the warranty period, CORTELCO agrees to repair
or, at its option, replace the defective product, or any part of it without charge for
parts or labor. This is your exclusive remedy. This warranty does not cover
damage resulting from accident, misuse, abuse, improper installation or op-
eration, lack of reasonable care, the affixing of any attachment not provided by
CORTELCO with the product and loss of parts. The warranty is voided in the
event any unauthorized person alters or repairs the unit.
Telephone companies use different types of equipment and offer various
types of services to customers. CORTELCO does not warrant that this prod-
uct is compatible with the type of equipment of any particular phone com-
pany or the services provided by it.
CORTELCO DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING THE WAR-
RANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE,AS OF THE DATE ONE YEAR FROM THE ORIGINAL
PURCHASE OF THE PRODUCT. CORTELCO ASSUMES NO RESPONSIBIL-
ITY FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
THIS WARRANTY GIVES YOU SPECIFIC LEGALRIGHTS,AND YOU MAY HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE. SOME STATES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES OR LIMITATIONS ON HOW LONGAN IM-
PLIED WARRANTY LASTS, SO THE ABOVE EXCLUSION AND LIMITATION
MAY NOTAPPLYTO YOU.
If failure occurs and your telephone is in warranty, service shall be provided by
returning it to CORTELCO - Repair Center, 1703 Sawyer Road, Corinth, Mis-
sissippi 38834, shipping prepaid. The product will be repaired or replaced if
examination by us determines the product to be defective. Telephones re-
ceived damaged as a result of shipping will require you to file a claim with the
carrier.
OWNER’S
INSTRUCTION
MANUAL
Model 8599
859985VOE20E
Rev. 1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEPHONEREPAIR
TELEPHONE FEATURES
TELEPHONE SET UP
DO NOT ATTEMPT TO REPAIR THIS PRODUCT YOURSELF. Telephones manu-
factured by CORTELCO must be returned to us for repair.
You can return your telephone to CORTELCO for repair or replacement in
accordance with our LIMITED WARRANTY.
1. Use the new line cord to connect the PHONE jack of your new
telephone to the modular wall jack.
CORTELCO warrants THIS PRODUCT against defects in material and workman-
ship in accordance with our LIMITED WARRANTY. If your telephone is returned
for repair, include a copy of your sales receipt containing the date-of-purchase.
DO NOT INCLUDE THE ORIGINAL SALES RECEIPT.
2. Place the unit on a flat table or mount it on a wall. To mount the unit
on a wall, you must use the wall mount bracket supplied.
PULSEAND TONE DIALING
If date-of-purchase is not included, the factory date printed on the label on the
bottom of your telephone will be used as the date-of-purchase. The factory date
allows six months for distribution and sale of this product.
1. If your telephone line accepts touch-tone dialing, set the PULSE/
TONE switch to the Tone position. The switch is located on the left
side of the telephone. The default position is tone dialing.
2. If your telephone line requires rotary (pulse) dialing, set the
PULSE/TONE switch to the Pulse position.
If you return your telephone for repair, the warranty period is not extended. The
original date-of-purchase continues to apply to your warranty.
OUT-OF-WARRANTY REPAIR We will repair this product for a nominal fee after
the LIMITED WARRANTY has expired if you send it to us in a complete and
undamaged condition. The repaired unit will be shipped to you C.O.D., freight
collect.
3. If you are unsure which system you have, set the switch to the
TONE position. Lift the handset. When you get a dial tone, dial a
telephone number. If the dial tone continues, move the switch to
PULSE, and then dial the telephone number again.
RETURN-FOR-REPAIR PACKAGING If you are returning a unit to us for repair,
package it carefully, preferably in the original carton. Be sure to include your return
address, a copy of the sales receipt showing date-of-purchase, and a note de-
scribing the problem you have with your Telephone. Shipping must be prepaid. If
the telephone is in warranty, it will be repaired or replaced, at our option, at no
cost to you, and it will be returned shipping prepaid.
RECEIVINGAPHONE CALL
1. Be sure the RINGER switch is set to the desired position.
2. When the phone rings, lift the handset.
Ship your telephone (shipping prepaid) to:
CORTELCO
REPAIR CENTER
PLACINGAPHONE CALL
1703 SAWYER ROAD
CORINTH, MS 38834
1. Lift the handset and wait for a dial tone.
2. Dial the telephone number you wish to call.
REDIAL BUTTON
1. If the number you dialed is busy, or you want to call the last number
dialed again, lift the handset , or press and release the hookswitch
for a new dial tone.
2. Press REDIAL.
3. The last number called will automatically be redialed.
Download from Www.Somanuals.com. All Manuals Search And Download.
FLASH BUTTON
TROUBLESHOOTING
PHONE DOES NOT RING
This telephone provides a line break signal for accessing PBX services
or for convenient use of CallWaiting from your local telephone com-
pany. If you have Call Waiting service, you can use this function per the
followinginstructions.
1. Line cord is disconnected at telephone outlet or at telephone end.
2. Phone is OFF HOOK. Make certain the hookswitch is depressed
when the handset is in the cradle.
1. While having a conversation, another party calls and you hear a tone.
2. Press the FLASH button once and release. The first conversation is
placed on hold and the second call can be answered.
NO DIAL TONE
Wire is disconnected at telephone jack or at wall jack. Test the tele-
phone in a different wall jack. If it works, the first jack may be defec-
tive.
3. Press FLASH button again and release. The first caller can be
spoken to again and the second call is placed on hold.
PAUSE BUTTON
HAVE DIALTONE BUT CANNOT DIALOUT
Use the PAUSE button to insert a 3 Second pause during dialing. This
may be necessary for REDIAL to work on long distance calls or when
using a telephone system that requires an access code.
Check if the PULSE/TONE switch is in the correct position.
REDIAL BUTTON DOES NOT FUNCTION
The telephone may have been momentarily disconnected from the
telephone jack.
HANDSET VOLUME CONTROL
Use the Volume button to change the handset volume. Press the button
once to increase the volume. Press it again to return to normal volume.
MAINTENANCE INFORMATION
RINGER VOLUME
Treat your telephone equipment with care for trouble-free perfor-
mance.Avoid dropping the handset. Carefully place the handset on-
hook after use.
Use the RingerVolume control located on the left side of the phone
base to change ringer volume between low, medium, and high.
Avoid putting near heating appliances and devices that generate electri-
cal noise (for example, motors and florescent lamps).
Clean your telephone equipment with a damp cloth. Stains may be
removed with a mild soap. Do not use liquid or aerosol detergents or
cleaning agents.
Download from Www.Somanuals.com. All Manuals Search And Download.
|