Cornelius Incorporated
500 Regency Drive
Glendale Heights, IL 60139
Telephone (630) 980-6900
Facsimile (630) 980-8511
ICEMAKER ADAPTER KIT (P/N 629085001)
This Icemaker Adapter Kit (P/N 629085001) is for the following Units:
Dis pens er Model
Icemaker Model
ED200/250
Wilshire WCC500/700
Table 1. Adapter Kit Parts
Item
No.
Part No.
620032802
22128
Name
Qty.
1
1
Icemaker Adapter Lid
2
Bracket, Icemaker Mounting
RTV, 3-Oz. Tube
2
3
50904
1
4
620032804
70226
Cover, Manual Ice Fill
1
5
#10 Sheet Metal Screw
Thumb Screw, #8--32X3/8--in. Long
Installation Instructions
12
1
6
70188
7
620913501
1
CAUTION: Dis connect electrical power from the Dis pens er before attempting to ins tall this
Kit.
1. Remove merchandiser from the Dispenser by lifting up on both the right and the left sides to disengage the
merchandiser from slots in the Dispenser cabinet. Tilt the merchandiser forward from the top and lift off.
NOTE: Dis regard s tep 2 if the ice diverter has been factory ins talled.
2. Refer to Figure 4 for the following:
A. Remove the ice chute cover (snap-fit) and ice chute (4 nuts).
B. Remove the gate restrictor and discard.
C. Install the ice diverter as shown.
D. Replace the ice chute and cover.
3. Refer to Figure 3 for adjusting the automatic agitation timer.
A. Loosen/rotate the center mounting screw that secures the white reflector panel/electrical control box
cover in place and lower the cover to expose the automatic agitation timer.
B. Adjust the timer to 2-seconds “ON” and 1-hour “OFF” as shown in Figure 3.
C. Reinstall the white reflector panel and the merchandiser.
October 27, 1998
EIMI Cornelius Inc; 1998
REV: A
Download from Www.Somanuals.com. All Manuals Search And Download.
6
DRILL .136 DIA. HOLES USING
BOTTOM OF SLOTTED HOLES
AS A TEMPLATE.
DETAIL “A”
ENLARGED
14 1/2”
25”
4
7”
1
5
DETAIL ”A”
FIGURE 1.
3
620913501
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT OF ICEMAKER
FLUSH WITH SIDE OF DISPENSER
14 1/2”
25”
RUN A BEAD OF RTV INSIDE
THE PERIMETER OF THE
ICEMAKER OUTLINE ON THE LID
2
5
7”
FIGURE 2.
620913501
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FIGURE 3.
5
620913501
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE
HOPPER
GATE
MOUNTING
PLATE
FLANGE EXTENDS
INTO STORAGE
HOPPER THROUGH
GATE OPENING
ICE DIVERTER
P/N 15484
ICE CHUTE
APPLY RTV TO THIS
SURFACE TO SEAL TO
HOPPER GATE
MOUNTING PLATE
GASKET
FLAT WASHER
10--32 NUT
FIGURE 4.
620913501
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|