ROADWAY
50-400W
OVX DROP PRISMATIC REFRACTOR
MH/HPS/MERCURY
ROADWAY LUMINAIRE
28 1/4" [718mm]
11 1/4"
[286mm]
NOTE: In flat glass applications only.
13 1/4" [337mm]
STREETWORKS™
HOUSING
ORDERING INFORMATION
Die-cast aluminum housing and
latch. Standard grey polyester
powder coat finish. Other finish
colors available. Consult your
Streetworks Representative.
Optional NEMA twistlock
photocontrol receptacle also
available.
SAMPLE NUMBER: OVX40SWW3E4
LAMP TYPE 2
S=High Pressure
Sodium
BALLAST TYPE 2
C=CWI
VOLTAGE2
2=120V
0=208V
4=240V
7=277V
8=480V
F=120/240 wired 120V
P=240 w/PCR wired 120V
W=Multi-Tap wired 120V
N=Multi-Tap wired 277V
DISTRIBUTION4
2=Type II
3=Type III
CUTOFF4
D=MCO
E=MSCO
OPTIONS +
ACCESSORIES
(See Below)
PRODUCT
FAMILY
OVX
LAMP WATTAGE
50=50W
70=70W
H=Reac./HPF
K=10KV CWA 3
M=Mag. Reg.
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA
10=100W
V=Mercury
M=Metal Halide
15=150W 1
17=175W
20=200W
25=250W
24=250/400W
wired 250W
40=400W
REFLECTOR
The optical system is a
hydroformed anodized aluminum
reflector with a Dacron polyester
filter.
42=400/250W
wired 400W
DOOR
Die-cast aluminum door frame with
integral hinges for hands free
installation, relamping and
maintenance. ANSI wattage/source
label.
OPTIONS + ACCESSORIES [ Must be listed in the order shown and separated by a dash]
OPTIONS (add as suffix)
ACCESSORIES (order separately)
RA1001=Cutoff Visor
1=Single Fuse, Internally Mounted (120 or 277V)
2=Double Fuse, Internally Mounted (208, 240, or 480V)
4=Photocontrol Receptacle
WH=White
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=120V Photocontrol
OA/RA1016=105V-285V Photocontrol
OA/RA1027=480V Photocontrol
OA1028=Field Installed PCR Kit
OA1217=TufGuard Vandal Shield
LENS
Removable prismatic refractor
for use with High Pressure Sodium,
Metal Halide and Mercury lamp
sources.
BK=Black
BZ=Bronze
E=150W/100V/HPS Ballast
F=Flat Glass (available only in MCO)
G=Borosilicate Glass Refractor (175W & below) 5
H=Plug-in Starter Receptacle
K=Level Indicator
SOCKET
Adjustable mogul-base porcelain
socket.
M=MOV Lightning Surge Protector 6
P=Polycarbonate Refractor (250W Max.)
T=Swing-down Ballast Bridge 7
U=UL/CSA Listed
BALLAST ASSEMBLY
Hard mounted ballast with
encapsulated starter for protection
from environmental abuse.
Standard two position tunnel type
compression terminal block.
Optional swing-down ballast bridge
also available (up to 250W).
OPTIONAL COLORS [ Standard color is grey, other finish colors available. Consult your Cooper Lighting representative]
MOUNTING
Two-bolt/one bracket slipfitter with
cast-in pipe stop and leveling steps.
Fixed-in-place birdguard seals
around 1 1/4" or 2" mounting arms.
WH
White
BK
Black
BZ
Bronze
EPA:
Effective Projective Area: .87
NOTE: 1 150W units are for S55 lamp. 2 Refer to technical section for lamp/ballast/voltage compatibility. 3 Available in 120/240V dual voltage or single voltage only for 50-150W. 4 Other distributions & cutoffs available. Consult
your Streetworks Representative. 5 Acrylic is standard on units 50W through 150W HPS and 175W mercury. Glass standard for 200-250W. 6 MOV option is not available for any system requiring a three position terminal
block (Example—240V with PCR with wired 120V). In order for MOV option to function center terminal of three position terminal block must be connected to “Earth” ground. 7 Not available on 250W Mag. Reg. or 400W
units.
SHIPPING DATA
Approximate Net Weight:
35 lbs. (16 kgs.)
118 STREETWORKS Outdoor Lighting Solutions
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooper Lighting
|