®
COOPER LIGHTING - LUMARK
DIMENSIONS
DESCRIPTION
Yoke Mount
Slipfitter Mount
The Lumark Nighthawk III
utilizes a soft-cornered
aerodynamic design to
provide excellent EPA
18 1/2"
[470mm]
18 1/2"
[470mm]
22 1/2"
[572mm]
27 1/2"
[699mm]
ratings and an aesthetically
pleasing appearance. Dark
bronze polyester powder
coat finish assures corrosion
resistance and long-lasting
aesthetics. U.L. listed and
CSA certified for wet
locations.
20 1/2"
[521mm]
20 1/2"
[521mm]
150-400W HPS & MH,
1000W HPS 9 1/2" [241mm]
1000W MH 10 1/2" [267mm]
150-400W HPS & MH,
1000W HPS 9 1/2" [241mm]
1000W MH 10 1/2" [267mm]
Trunnion Mount
NK
YOKE- AND TRUNNION-MOUNT DRILL PATTERN
NIGHTHAWK III
18 1/2"
[470mm]
24"
[610mm]
1"
[25mm]
1 5 0 - 1 0 0 0 W
1 1/2" [38mm]
20 1/2"
[521mm]
High Pressure Sodium
P ul s e St a r t M et al H al i d e
Metal Halide
150-400W HPS & MH,
1000W HPS 9 1/2" [241mm]
1000W MH 10 1/2" [267mm]
3 1/2"
[89mm]
9/16" [14mm] 7/8" [22mm]
dia. hole (2) dia. hole
2" [51mm]
5 3/8"
[137mm]
1 7/8"
[48mm]
3 3/4" [95mm]
EPA-Effective Projected Area: 2.7
SLIPFITTER-, YOKE-, OR
TRUNNION-MOUNTED
FLOODLIGHT
ORDERING INFORMATION
• Aerodynamically
designed die-cast
SAMPLE NUMBER: HPNK-S76-400-MT-Q
aluminum housing has
low EPA rating and is
finished in a dark bronze
polyester powder coat
4
Lamp Type
HP=High
Pressure
Sodium
MH=Metal
Halide
Series
NK=Nighthawk III
Mounting
Type
S=Slipfitter
T=Trunnion
Y=Yoke
Distribution
76=7Hx6V
Lamp Wattage
Voltage
120V
208V
240V
277V
347V
480V
Options &
Accessories
150=150W
175=175W
200=200W
250=250W
320=320W
400=400W
750=750W
(See Below)
• Flush, draw-action latches
offer easy access to lamp
compartment without
tools and maintain
integrity of seal when
closed
2
3
MP=Pulse
Start MH
5
MT=Multi-Tap
TT=Triple-Tap
1
6
(CWA)
1000=1000W
STOCK SAMPLE NUMBER (Lamp Included)
SAMPLE NUMBER: MHNKS1K
• Die-cast aluminum with
integral cast hinges for
toolless access
• Heat- and impact-resist-
ant tempered glass. Lens
is mounted flush with door
surface to reduce wind
drag and prevent dirt
or moisture from
Lamp Type
HP=High Pressure Sodium
MH=Metal Halide
Series
NK=Nighthawk III
Mounting Type
S=Slipfitter
Y=Yoke
Lamp Wattage
25=250W
40=400W
1K=1000W
Accessories
TYS-XX=Trunnion or Yoke Slipfitter for
7
8
2 3/8", 3", or 3 1/2" O.D. Tenon
NOTES: Options not available with stock products. Order Accessories as separate items for field installation.
Refer to standard ordering information to add options and accessories.
accumulating
For Pole Information Refer to Cooper Lighting Pole Section.
• Door gasket is foam-in-
place silicone, providing
maximum protection of
interior components from
the elements
9
11
Options
Accessories
F1=Single Fuse (120, 277 or 347V)
F2=Double Fuse (208, 240 or 480V)
VS/NK=Vandal Shield
VS/NK/1000=Vandal Shield for 1000W Units
WG/NK=Wire Guard (Specify Color)
OA/RA1016=Photoelectric Control, 105-285-Volt NEMA Type
OA/RA1027=Photoelectric Control, 480 Volt NEMA Type
OA/RA1028=Field Installed NEMA Twistlock Photocontrol Receptacle
(Order Photocontrol Separately)
OA/RA1201=Photoelectric Control, 347 Volt NEMA Type
TV/NK=Top or Bottom Visor (Specify Color)
SV1/NK=Single Side Visor (Specify Color)
SV/NK=Double Side Visor (Specify Color)
OA/RA1013=Shorting Cap for NEMA Twistlock Photocontrol Receptacle
TYS-XX=Trunnion or Yoke Slipfitter for 2 3/8", 3", or 3 1/2" O.D. Tenon
Q=Quartz Restrike DC Bayonet Base (Hot Strike Only)
EM=Quartz Restrike Cold Start Time Delay Relay
(Not available in 1000W)
PER=NEMA Twistlock Photocontrol Receptacle
T=Removable Quick-Disconnect Power Tray
(Cannot be used with 1000W units)
• Available in three (3)
mounting variations.
Slipfitter: Die-cast
aluminum integral
10
LL=Lamp Included
slipfitter mounts on 2 3/8"
to 3" O.D. tenon. Yoke:
Heavy-duty steel yoke
provides flexibility in
mounting from a variety
of surfaces. Trunnion:
Die-formed steel trunnion
is easily adapted to many
areas and allows easy
fixture aiming.
LAMP TYPE
WATTAGE
Metal Halide
150, 175, 250, 400, 1000W
200, 250, 320, 400, 750W
Pulse Start Metal Halide
High Pressure Sodium
150, 250, 400, 750, 1000W
• Approximate net weight:
59 lbs. (27 kgs.)
NOTES: 1 200, 250, 320, 350, 400, & 750W. 2 Pulse Start Metal Halide only. 3 HPS & MP only. 4 Products also available in non-US voltages and 50Hz for international
markets. Consult factory for availability and ordering information. 5 Multi-Tap ballast is 120/208/240/277V wired 277V. 6 Triple-Tap ballast is 120/277/347V wired
347V. 7 Multi-tap ballast, 7Hx6V distribution, bronze finish, and lamp are standard for stock product. 8 250W stock product only available with Metal Halide
lamp and slipfitter mount. 9 Add as suffix in the order shown. 10 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on
luminaire requirements. Specified lamps must be ordered as a separate line item. 11 Order separately, replace XX with color suffix. 12 Specifications and
dimensions subject to change without notice.
559
COOPER LIGHTING
Download from Www.Somanuals.com. All Manuals Search And Download.
|