Installation Instructions
Sheet 1 of 3
Large, OUTDOOR
P2R
(Pendant, 2-way, Remote ballast)
Visor and Non-Visor
Warning: Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Vault
C-Scroll
Roundel
These installation instructions are valid with the above Ametrix styles.
Securing pendant to ceiling
Exploded view and part call-out
1
3/8" fasteners
(by others)
J-box
(by others)
Canopy
#8-32 x3/8"
Set screw
(2x)
1/4-20 x4"
Hex bolt
(2x)
#8-32 x3/8"
Set screw
(2x)
Cover plate
(2x)
Canopy
Cover plate
1/4-20 x4
Hex bolts
(2x)
Fixture head
assembly
1. Remove both 1/4-20 x4 hex bolts from bottom of pendant.
2. Remove both #8-32 x3/8" set screws and allow canopy to
slide down pendant.
3. Run wires from J-box into pendant, ensure there is enough
wire to reach cover plate.
4. Using appropriate fasteners, secure fixture to ceiling. Use
additional bracing if necessary.
Attention:
Large fixtures require additional bracing/structure
around J-box to support fixture.
5. Replace canopy and secure using both set screws.
2
Wiring the fixture
Sealing the fixture
3
1/4-20 x4
Hex bolts
(2x)
#8-32 x1/2"
Socket cap screws
(2x)
Cover plate
Cover plate
gasket
(2x)
#8-32 x5/8"
Socket cap screws
(3x)
Wire seal
1. To seal fixture, ensure door is secured with provided socket
cap screws. Secure #6-32 x1/2" socket cap screws above door
latches.
2. Secure #6-32 x5/8" socket cap screws into bottom of door.
3. Refer to supplementary sheets for torque specs and aiming
instructions.
1. Slide fixture assembly onto pendant and secure with both
1/4-20 x4 hex bolts.
2. Attach appropriate wires and ensure all connections are
properly matched
3. Secure cover plate
ADY071474 REV A(ECN070347)
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
Sheet 3 of 3
Large, OUTDOOR
P2R
(Pendant, 2-way, Remote ballast)
Visor and Non-Visor
Warning: Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Vault w/ visor
C-Scroll w/ visor
Roundel w/ visor
These installation instructions are valid with the above Ametrix styles
Lamping Size Chart
(lamps provided by others)
FIXTURE SIZE
# OF
Lamp
(inches/ mm) WATTAGE LAMPS LAMP TYPE LAMP DESCRIPTION (not to scale)
16
16
16
/ 419.1
/ 419.1
/ 419.1
32 W
42 W
57 W
1
1
1
T4
T4
T4
Compact Flourescent
Compact Flourescent
Compact Flourescent
1/2
1/2
1/2
16
16
16
/ 419.1
/ 419.1
/ 419.1
100 W
150 W
175 W
1
1
1
ED17
T6
Ceramic Metal Halide
Ceramic Metal Halide
Ceramic Metal Halide
1/2
1/2
1/2
ED17
22
/571.5 mm
/571.5 mm
/571.5 mm
250 W
400 W
150 W
1
1
2
ET18
ET18
T6
Metal Halide
Metal Halide
1/2
1/2
1/2
22
22
Ceramic Metal Halide
22
22
/571.5 mm
/571.5 mm
32 W
42 W
2
2
T4
T4
Compact Flourescent
Compact Flourescent
1/2
1/2
22
22
22
/571.5 mm
/571.5 mm
/571.5 mm
250 W
400 W
150 W
1
1
2
ET18
ET18
T6
Metal Halide
Metal Halide
1/2
1/2
1/2
Ceramic Metal Halide
22
22
/571.5 mm
/571.5 mm
350 W
500 W
1
1
T3
T3
Halogen(Double Ended)
Halogen(Double Ended)
1/2
1/2
30
/ 774.7
/ 774.7
/ 774.7
/ 774.7
36 W
40 W
50 W
55 W
1
1
1
1
T5
T5
T5
T5
Twin Tube
Twin Tube
Twin Tube
Twin Tube
1/2
1/2
1/2
1/2
30
30
30
30
30
30
30
/ 774.7
/ 774.7
/ 774.7
/ 774.7
36 W
40 W
50 W
55 W
2
2
2
2
T5
T5
T5
T5
Twin Tube
Twin Tube
Twin Tube
Twin Tube
1/2
1/2
1/2
1/2
30
30
/ 774.7
/ 774.7
250 W
400 W
2
2
ET18
ET18
Metal Halide
Metal Halide
1/2
1/2
30
30
/ 774.7
/ 774.7
900 W
1
1
T3
T3
Halogen(Double Ended)
Halogen(Double Ended)
1/2
1/2
1000 W
ADY071474 REV A(ECN070347)
Download from Www.Somanuals.com. All Manuals Search And Download.
|