Cooper Lighting Indoor Furnishings 0FY599A02 User Manual

®
LAZER BY HALO  
CONNECTORS (For use with Lazer Track Only)  
LZR200  
Live End Feed with Junction  
Box Cover  
LZR201  
Live End Feed  
For starting a track run at beginning of track.  
For starting a track run at beginning of  
track and when connector is mounted to  
a junction box.  
Finishes: White (P), Black (MB)  
Finishes: White (P), Black (MB)  
LZR202  
Floating Canopy and  
Connector Feed  
LZR203  
Adjustable “L” and Straight  
Connector Feed  
Track can be connected to existing outlet  
box located anywhere along the track.  
Comes with canopy cover, connector,  
dead end and mounting hardware.  
To connect two track sections at right angles  
or straight end-to-end. Includes straight and  
right angle covers.  
Finishes: White (P), Black (MB)  
Finishes: White (P), Black (MB)  
LZR204  
Conduit Adapter Feed  
LZR205  
Conduit Continuation Feed  
Designed to accept 1/2” trade size conduit  
fitting (not supplied). Use when feeding  
to track through surface conduit system.  
Includes one left feed and one right feed  
to continue a run around obstructions.  
Requires 1/2” trade size fitting (not included).  
Finishes: White (P), Black (MB)  
Finishes: White (P), Black (MB)  
LZR206  
T-Bar Canopy  
LZR208  
Cord and Plug Feed  
For installing track on T-Bar ceilings.  
LZR201 or LZR203 also required.  
10’ three-wire cord with grounded plug.  
Maximum capacity 5 AMPS.  
Finish: White (P)  
Finishes: White (P), Black (MB)  
LZR211  
Flexible Connector Feed  
LZR212  
Mini Connector  
To connect two track sections at any angle  
up to 90° or for connecting wall and ceiling  
mounted track. Can be used as electrical  
feed point.  
For joining two track sections end-to-end.  
LZR212 is not an electrical feed.  
Finishes: White (P), Black (MB)  
Finishes: White (P), Black (MB)  
LZR214  
X Connector  
LZR213R  
LZR213L  
Right Handed T Connector  
Left Handed T Connector  
For joining four track sections in an X pattern.  
Can be used as electrical feed point.  
To connect three track sections. Can be used as  
electrical feed point.  
Finishes: White (P), Black (MB)  
Finishes: White (P), Black (MB)  
DE112  
Dead End  
Replacement Dead end for Lazer Track ( 6  
included).  
Finishes: White (P), Black (MB)  
NOTE: Unless otherwise stated, Lazer  
connectors are not compatible with Halo  
Miniature Power-Trac.  
COOPER LIGHTING  
335  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cobra Electronics Marine Battery CPI 475 User Manual
Craftsman Snow Blower 53688112 User Manual
Cuisinart Microwave Oven CMW 55 Series User Manual
Dukane Projector 28A9115 User Manual
Dukane Projector 2100 Series User Manual
Fellowes Paper Shredder 220 User Manual
Ford Automobile 2009 F 150 User Manual
Fundex Games Games 3290 User Manual
Gardena Trimmer THS 400 User Manual
Gateway Computer Monitor VX760 User Manual