Connect Tech Computer Drive SSD 104 User Manual

SSD/104 SATA  
User Manual  
Connect Tech Inc.  
42 Arrow Road  
Guelph, Ontario  
N1K 1S6  
Tel:  
519-836-1291  
Toll Free:  
Fax:  
800-426-8979 (North America only)  
519-836-4878  
Email:  
Web:  
CTIM-00146 Revision 0.00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect Tech SSD/104 SATA User Manual  
Table of Contents  
Revision History  
Revision  
Date  
Author(s)  
Change(s)  
Initial Manual Revision Created  
0.00  
02-10-2012  
PD  
Revision 0.00  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connect Tech SSD/104 SATA User Manual  
Customer Support Overview  
If you experience difficulties after reading the manual and/or using the product, contact the  
Connect Tech Inc. reseller from which you purchased the product. In most cases the reseller can  
help you with product installation and difficulties.  
In the event that the reseller is unable to resolve your problem, our highly qualified support staff  
can assist you. Our support section is available 24 hours a day, 7 days a week on our website at:  
www.connecttech.com/sub/support/support.asp. See the contact information section below for  
more information on how to contact us directly. Our technical support is always free.  
Contact Information  
We offer three ways for you to contact us:  
Mail/Courier  
You may contact us by letter at: Connect Tech Inc.  
Technical Support  
42 Arrow Road, Guelph, ON  
Canada N1K 1S6  
Email/Internet  
You may contact us through the Internet. Our email and URL addresses on the Internet are:  
Note:  
Please go to the Download Zone or the Knowledge Database in the Support Center on the  
Connect Tech Inc. website for product manuals, installation guides, device driver software and  
technical tips. Submit your technical support questions to our customer support engineers via  
the Support Center on the Connect Tech Inc. website.  
Telephone/Facsimile  
Technical Support representatives are ready to answer your call Monday through Friday, from  
8:30 a.m. to 5:00 p.m. Eastern Standard Time. Our numbers for calls are:  
Telephone:  
Telephone:  
800-426-8979 (North America only)  
519-836-1291 (Live assistance available 8:30 a.m. to 5:00 p.m. EST, Monday to  
Friday)  
Facsimile:  
519-836-4878 (online 24 hours)  
4
Revision 0.00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connect Tech SSD/104 SATA User Manual  
Introduction  
Connect Tech’s SSD/104 SATA is a complete rugged stackable solid state drive (SSD) and storage solution  
that allows up to two mSATA SSD modules to be installed into any PC/104-Plus, PCI-104, PCI/104-  
Express and PCIe/104 stack or embedded system. SSD/104 SATA solid state drive (SSD) and storage  
solution improves performance, expands storage capacity and reduces overall storage footprint in an  
embedded system.  
Designed with the latest generation of mSATA SSD modules, SSD/104 SATA solid state drive (SSD) and  
storage solution can be easily upgraded to accommodate future generations of mSATA modules for even  
greater system capacity and performance.  
When combined with mSATA SSD modules, SSD/104 SATA solid state storage solution directly  
interfaces with the standard SATA bus, which can be used as a drop-in replacement for any SATA storage  
device. SSD/104 SATA can also be interfaced with any single board computer or embedded system using  
standard 7-pin SATA.  
SSD/104 SATA is available as a complete storage solution with a preinstalled mSATA module, or as a  
separate mSATA carrier which supports any mSATA SSD module.  
Revision 0.00  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connect Tech SSD/104 SATA User Manual  
Product Features  
Specification  
Details  
SSD Slots  
2 x mSATA SSD slots (JEDEC MO-300B compatible)  
Storage Capacities  
Options  
4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB (per mSATA slot)  
** Or larger as new mSATA modules come to market  
Flash Type Options  
SLC or MLC  
Operating  
Industrial (-40 to +85) or Commercial (0 to +70)  
Temperature Options  
Power Requirement  
Interface  
+3.3V / 0.5A max  
Which can be sourced by PCIe/104 Bus, PCI-104 Bus or External Connector  
SATA Revision 2.6  
SATA II 1.5Gbps / 3.0Gbps  
Will work with any SBC SATA port  
Performance  
Numbers may vary  
depending on mSATA  
module used  
Host Transfer Rate: 300MB/s  
Sequential Read: Up to 270MB/s  
Sequential Write: Up to 240MB/s  
Random Read IOPS: Up to 35k  
Random Write IOPS: Up to 30k  
SSD/104 Carrier  
Dimensions  
3.550” x 3.775” (90.17mm x 95.89mm)  
PC/104 Compliant  
(Overall Board Size)  
mSATA SSD Module  
Dimensions  
2.000” x 1.175” (50.80mm x 29.85mm)  
JEDEC 300-MB Compliant  
Mini PCIe Form Factor Compliant  
Power  
Supply Voltage: +3.3V ±5%  
Low Power Consumption: 260mA (Active) / 130 mA (Idle)  
Power is sourced directly from the PCIe/104 bus, PCI-104 bus or the external power  
connector  
Connectors  
Standard Right Angle 7-pin SATA data connectors  
mSATA Connectors  
PCI-104 stacking connector (optional)  
PCIe/104 stacking connectors (optional)  
3.5mm pitch Phoenix Type power connector  
Build Options  
PCI/104-Express Build Both PCIe/104 and PCI-104 stacking connectors installed  
PCIe/104 Build Only the PCIe/104 stacking connector is installed  
PCI-104 Build Only the PCI-104 stacking connector is installed  
No Bus Build No stacking bus connectors installed  
Cable-Free Operation The SSD/104 SATA also has the option to take the SATA signals directly from any PCIe/104 or  
Option  
PCI/104-Express Type 2 SBC, eliminating the need to use any SATA cables.  
(PCIe/104 Type 2)  
mSATA SSD ports  
Up to 2 mSATA SSD modules can be installed  
6
Revision 0.00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connect Tech SSD/104 SATA User Manual  
Board Diagram  
Revision 0.00  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connect Tech SSD/104 SATA User Manual  
Block Diagram  
8
Revision 0.00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connect Tech SSD/104 SATA User Manual  
Part Number Information  
Part Number  
Features  
Full Build Both PCIe./104 and PCI-104 Connectors are installed  
SDG001  
PCIe/104 Build Only PCIe/104 Connector is installed  
SDG002  
PCI-104 Build Only PCI-104 Connector is installed  
SDG003  
No bus connectors installed, external power must be used.  
SDG004  
To order any of these part numbers or to inquire about the other available ordering options please contact  
[email protected] for further information.  
Revision 0.00  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connect Tech SSD/104 SATA User Manual  
Power Sourcing Explaination  
The SSD/104 SATA board powers its mSATA modules from +3.3V. This voltage rail can be provided  
from the PCI-104 bus +3.3V rail, the PCIe/104 bus +3.3V rail or from the external +3.3V power connector  
on the board. It is important to check whether your SBC or SBC’s power supply provides +3.3V over the  
embedded buses, if the SBC does NOT provide +3.3V power over the bus connectors the external power  
connector MUST be used.  
The SSD/104 SATA board also has Ferrite Beads located near each power source that can be populated or  
de-populated to select the sourcing from a particular voltage rail, in most cases the default configuration of  
all installed will be adequate. These ferrites have the following designators L2, L3, and L4.  
Hardware Installation Information  
Please follow these steps with installing the SSD/104 SATA into your system.  
1) Ensure your SBC is powered OFF  
2) Install the SSD/104 SATA card onto your PC/104 stack (if available)  
3) Install mSATA modules into mSATA slots on carrier  
4) Connect SATA cables from SSD/104 Carrier to SBC  
5) Power ON your SBC  
mSATA SSD Module Information  
Connect Tech’s SSD/104 SATA Carrier board allows for the installation of 2 mSATA SSD Modules.  
mSATA modules should be JEDEC MO-300B compatible pinout and size. mSATA SSD modules are not  
only small in size and rugged but extremely and can drastically reduce boot time.  
Both SLC and MLC flash types can be used as well as commercial and industrial operating temperature  
grades.  
mSATA is a relatively new format for ultra-small Solid-State Disks (SSDs), developed by Intel. mSATA  
SSDs take a form factor similar to mini-PCI Express cards, and is now adopted by many manufactures, see  
below for a current listing of popular vendors with mSATA SSD modules available.  
Listing of mSATA SSD Module Vendors  
ADATA  
AMP Inc.  
Apacer  
mSATA size comparison  
Delkin  
Delkin  
innodisk  
Intel  
Kingston  
NetList  
OCZ  
Renice  
RunCore  
Samsung  
Super Talent  
Swissbit  
10  
Revision 0.00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connect Tech SSD/104 SATA User Manual  
Using SATA Port from the PCIe/104 Type 2 Bus  
The SSD/104 SATA board has the ability to source its SATA channels directly from the PCIe/104 Type  
Bus. This can be done via 0 ohm 0402 sized resistor population options on the PCB and allows users to  
select from the TOP or BOTTOM side signals from the PCIe/104 bus. If you would like to order an  
SSD/104 SATA product from Connect Tech pre-configured to use PCIe/104 Type 2, please contact  
[email protected] . Otherwise the follow procedures can be performed by the end-user at their  
own risk.  
NOTE: These actions should only be done by trained technicians with adequate tools to be working with  
0402 sized parts.  
To connect SATA Port 0 from the PCIe/104 bus in a STACK UP configuration to mSATA0 please perform  
the following steps:  
-
-
REMOVE (R11& R12) (R15& R16)  
ADD (R9, R10) (R13, R14) (R7, R8) (R4, R8)  
To connect SATA Port 0 from the PCIe/104 bus in a STACK DOWN configuration to mSATA0 please  
perform the following steps:  
-
-
REMOVE (R11& R12) (R15& R16)  
ADD (R9, R10) (R13, R14) (R3, R5) (R1, R2)  
To connect SATA Port 1 from the PCIe/104 bus in a STACK UP configuration to mSATA1 please perform  
the following steps:  
-
-
REMOVE (R27& R28) (R31& R32)  
ADD (R25, R26) (R29, R30) (R17, R18) (R19, R20)  
To connect SATA Port 1 from the PCIe/104 bus in a STACK DOWN configuration to mSATA1 please  
perform the following steps:  
-
-
REMOVE (R27& R28) (R31& R32)  
ADD (R25, R26) (R29, R30) (R21, R22) (R23, R24)  
Locations of 0 ohm Resistor for PCIe/104 SATA Selection  
Top Side of SSD/104 SATA Bottom Side of SSD/104 SATA  
Revision 0.00  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connect Tech SSD/104 SATA User Manual  
mSATA Slot Connector Pinout  
Pin Number  
1
Description  
NC  
2
+3.3V  
3
NC  
4
GND  
5
NC  
6
NC  
7
NC  
8
NC  
9
GND  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
NC  
NC  
NC  
NC  
NC  
GND  
NC  
NC  
GND  
NC  
NC  
GND  
NC  
B+ (SATA TX+ To Host System)  
+3.3V  
B- (SATA TX- To Host System)  
GND  
GND  
NC  
GND  
NC  
A- (SATA RX- From Host System)  
NC  
A+ (SATA RX+ From Host System)  
GND  
GND  
NC  
GND  
NC  
+3.3V  
GND  
+3.3V  
NC  
GND  
NC  
NC  
NC  
NC  
NC  
NC  
GND  
NC  
+3.3V  
12  
Revision 0.00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Craftsman Cordless Drill 973111490 User Manual
Cub Cadet Snow Blower 522 WE User Manual
Cuisinart Fondue Maker CFO 3SS User Manual
Curtis Flat Panel Television LCD3213A User Manual
Cypress Computer Hardware CY62167EV30 User Manual
Dell Server E04S001 User Manual
Edelbrock Automobile Parts RPM Series User Manual
Fellowes Paper Shredder FS5+ User Manual
Fellowes Paper Shredder MS7CS User Manual
GE Air Conditioner AZ85W09DAC User Manual