Concord Camera Digital Camera Eye Q Easy Digital Camera User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Important Information ..........................................................................................2  
Precautions ............................................................................................................3  
1. Product overview ..................................................................................................4  
Important battery information ..............................................................................5  
Getting started ......................................................................................................6  
Minimum system requirement ..............................................................................6  
Eye-Q Easy package contents................................................................................6  
Learning the LCD display ......................................................................................7  
Warning Signal ......................................................................................................7  
Loading the batteries ............................................................................................8  
Turning the camera on/off ....................................................................................9  
The battery level....................................................................................................9  
2. Taking Pictures ....................................................................................................10  
Setting the Photo Quality and Changing Modes ................................................10  
Taking a picture with flash....................................................................................11  
Taking a movie clip..............................................................................................12  
Using the Self-timer ............................................................................................12  
Deleting pictures and video ................................................................................13  
3. Installing the drivers and software ....................................................................14  
Installing the software ........................................................................................14  
Installing the Camera driver – Concord Eye-Q Easy ............................................14  
Uploading your pictures to your PC....................................................................15  
Working with your pictures..................................................................................15  
Uploading your video clips to your PC ..............................................................16  
Using the camera as a web cam ........................................................................16  
Uninstalling the software on a Windows PC ......................................................17  
Uninstalling the driver on a Windows PC............................................................17  
4. Cleaning and maintenance ..................................................................................18  
Places to Avoid ....................................................................................................18  
Storing the camera ..............................................................................................19  
Cleaning your Camera..........................................................................................19  
When traveling overseas......................................................................................19  
5. Troubleshooting ..................................................................................................20  
6. Getting Help ........................................................................................................22  
7. Warranty Information ..........................................................................................23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
IMPORTANT INFORMATION  
FCC Statement  
This device complies with 15 the FCC Rules. Operation is subject to the  
following two conditions: (i) This device may not cause harmful interference,  
and (ii) this device must accept any interference received, including interference  
that may cause undesired operation.  
CAUTION  
This equipment has been tested and found to comply with limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential  
installation. The equipment generates, use, and can radiate radio frequency  
energy and if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following  
measures :  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
You are cautioned that any changes or modifications not expressly approved in  
this manual could void your warranty.  
For customers in Canada:  
CAUTION  
This class B digital apparatus complies with Canadian ICES-003.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
PRECAUTIONS  
Test Shots  
Always take a test photograph to check that the camera is functioning  
normally. The liability for any incidental losses ( such as the cost of  
photography or the loss of income from photography ) incurred as a  
result of fault with this product cannot be accepted.  
Notes on Copyright  
Images recorded using your digital camera system cannot be used in ways  
that infringe copyright laws without the consent of the owner unless  
intended only for personal use. Note that some restrictions apply to  
photographing stage performances, entertainment and exhibits, even  
when intended purely for personal use. Users are also asked to note that  
the transfer of memory cards containing images or data protected under  
copyright laws is only permissible within the restrictions imposed by  
those copyright laws.  
Liquid Crystal  
If the LCD monitor or LCD panel is damaged, take particular care with the  
liquid crystal in the monitor or panel. If any of the following situations  
arise, take the action indicated.  
• If the liquid crystal comes in contact with your skin wipe the area with  
a cloth and then thoroughly wash with water and soap.  
• If the liquid crystal gets into your eyes flush the eye with clean water  
for at least 15 minutes and then seek medical assistance.  
• If liquid crystal is swallowed flush your mouth thoroughly with water.  
Drink large quantities of water and induce vomiting. Seek medical  
assistance.  
Notes on Electrical Interference  
If the camera is used in hospital or aircrafts, please note that it may  
cause interference with other equipment in the hospital or aircraft. For  
details, please check with the applicable regulation in that area.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
1. Product overview  
FRONT  
1
2
3
1. Shutter button  
2. Flash unit  
3. Viewfinder  
4. Lens  
5. USB connector port  
5
4
1
2
4
5
6
BACK  
1. Green LED (On/Ready)  
2. Red LED (Low light/Busy)  
3. Status LCD  
4. Flash On/Off button  
5. Delete button  
6. Power/Select button  
7. Tripod mount  
8. Battery door  
3
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Important battery information  
The Eye-Q Easy camera uses a type of memory that continually draws  
power to retain the pictures in the camera’s internal memory even if the  
camera is powered off. If the battery power is depleted and you have not  
transferred your images to the computer, you will lose them. It is  
strongly recommended that you transfer your images to the computer  
promptly and then remove the batteries to extend their life.  
If you have not transferred your pictures to your computer and you  
receive a battery low warning, connect your camera to the computer via  
USB. While connected to the PC you can change the batteries and  
transfer the images.  
Always use fresh batteries to optimize the performance of your camera.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Getting started  
Congratulations on your purchase of the Concord Eye-Q Easy digital  
camera. This camera features 8 MB of internal memory allowing you to  
store still images or short 30 second movie clips in the camera. Please  
read this manual before operating the camera to become more familiar  
with the features of this versatile digital camera.  
Minimum system requirement  
• Windows 98 Second Edition, 2000 Professional, ME or XP  
• Pentium 233MHz or higher  
• 32MB of Ram or higher  
• USB port  
• 200 MB of free hard disk space  
Eye-Q Easy package contents  
1. Eye-Q Easy camera  
2. 2 AA Alkaline batteries  
3. USB cable  
4. Wrist strap  
5. User’s guide (also on the CD)  
6. Software CD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Learning the LCD display  
By default, the 3 digit LCD screen displays the number of images taken. It is  
also used in conjunction with the Power / Select button and Shutter button to  
access and display the Eye-Q Easy settings.  
Normal  
compression  
mode  
Video  
mode  
Self-timer mode  
High  
compression  
mode  
No compression  
mode  
Warning Signal  
Low battery warning  
When your camera has full power, the Battery indicator on the  
LCD display will be fully illuminated. When the power is low, the  
empty battery icon will flash with 5 beep sounds and then the  
camera will shut down automatically. This indicates that the  
batteries are weak and need to be replaced. The pictures will remain in the  
camera’s memory for approximately 2 days after the camera automatically  
powers off. Please transfer your images to the computer promptly and replace  
the batteries before taking more pictures.  
Full memory warning  
When your camera’s memory is full, the image counter mode  
icon (still picture or video) on the LCD will flash together. If only  
the image counter flashes, the memory is almost full.  
Note: Be sure to upload all images to your computer before changing the  
batteries. All images will be lost if there is insufficient battery power inside  
the camera.  
Note: The counter in each mode will show the number of pictures captured.  
To see the number of remaining pictures, hold the power button down for 1  
second.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Loading the batteries  
2 AA alkaline batteries are included with your  
camera.  
1. Make sure your camera is off.  
2. Open the battery door as shown.  
3. Insert the batteries with the positive terminal  
toward the + sign, and the negative terminal  
toward the - sign.  
4. Close the battery door.  
Important battery information  
It is strongly recommended that you use fresh batteries to optimize the  
performance of your camera. You may use alkaline batteries. To extend  
the battery life, remove the batteries from the camera when it is not in  
use. Remember to transfer your pictures to your computer first or you  
will lose them.  
Note:  
• Do not use different types of batteries together.  
• Soiling, such as fingerprints on the battery terminals, can significantly  
reduce the battery life.  
• Do not use new and used batteries together.  
• Do not use rechargeable batteries.  
• Different brands of batteries will yield different results.  
• The battery life of alkaline batteries may be shortened when exposed  
to temperatures of 10_C or below.  
• Always turn the camera off when replacing the batteries. If the camera is  
left on, the camera setting may revert to the default setting.  
• After 30 seconds of inactivity the camera will switch to standby mode  
automatically. The LCD will not be illuminated and all images will be  
stored in the camera’s memory.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Turning the camera on/off  
After inserting the batteries, the camera will automatically power on. The  
camera is ready for picture taking when the red Busy LED on the back of  
the camera turns off and the green Ready LED is illuminated.  
To turn the camera on, press the Power/Select button. The camera will  
emit two beeps. The camera is ready for picture taking when the red  
Busy LED on the back of the camera turns off and the green Ready LED is  
illuminated.  
To turn the camera off, press and hold the power button for 3 seconds.  
To extend battery life the camera is equipped with an automatic shut off  
that is triggered after 30 seconds of inactivity.  
The battery level  
It is important to check the battery level before operating the camera. As  
the batteries lose power, the empty battery icon will flash with 5 beep  
sounds and then the camera will shut down automatically. This  
indicates that the batteries are weak and need to be replaced. Pictures  
in the camera’s memory can be retained for approximately 2 days after  
the camera automatically shut down. Please transfer your images to the  
computer promptly and replace the batteries before taking more  
pictures. You will lose your pictures if the battery is depleted or empty.  
1. Download your images to the PC before opening the battery door or  
replacing the batteries. If you open the battery door before  
downloading the images, you will lose them.  
2. Excessive use of flash will limit the battery life.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
2. Taking Pictures  
Photos can be captured in one of three quality modes. These modes  
differ in photo file size and quality. The compression setting is the  
default mode for still images. You also have the ability to capture video  
or take pictures with a self-timer with the Concord Eye-Q Easy digital  
camera.  
Mode  
ꢀꢀꢀ  
Resolution  
640 x 480  
640 x 480  
640 x 480  
320 x 240  
640 x 480  
Level of compression  
Uncompressed  
ꢀꢀ  
1/4 compression  
1/8 compression  
1/8 compression  
1/4 compression  
Movie mode ꢀ  
Self time mode ꢀꢀ  
To change the quality setting or mode, refer to the Setting the Photo  
Quality and Changing Modes section below.  
Setting the Photo Quality and Changing Modes:  
Before taking pictures with the Concord Eye-Q Easy, please check the  
battery level. The camera should be used with full batteries only.  
1. Turn the camera on by pressing the Power/Select button.  
2. Use the Power/Select button to scroll through the quality settings and  
mode options.  
3. When you find the quality setting mode you desire, simply compose  
your picture with the viewfinder.  
4. Hold the camera still and press the Shutter button to take the picture.  
5. The camera will beep indicating the picture has been taken.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Taking a picture with flash  
The Concord Eye-Q Easy has two flash modes, Automatic Flash and Flash  
Off. Flash Off is the default mode. When the red Busy LED on the back  
of the camera is illuminated there is not sufficient light to yield a good  
quality image without using the flash. To set the flash, please refer to  
the Setting the Flash section below.  
Setting the Flash  
1. Turn the camera on by pressing the Power/Select button.  
2. Press the Flash On/Off button.  
3. The auto flash icon will blink. When the icon stops blinking you are  
ready to take a picture.  
Important notes about auto flash  
Optimal image results are obtained using the flash when the distance  
between the camera and the scene is 1m (3.2 ft.) to 3m (9.8 ft.).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Taking a movie clip  
You can record a movie clip in AVI format with your Concord Eye-Q Easy.  
The resolution of the movie clip is 160 x 120.  
1. Turn the camera on by pressing the Power/Select button.  
2. Scroll through the menu and select movie mode by pressing the  
Power/Select button until the movie camera icon appears.  
3. Press and hold the shutter button to begin recording. You can record  
up to 30 seconds of video. However, this duration may vary  
depending on the available memory.  
4. To stop recording, release the shutter button. The camera will  
automatically stop recording when the memory is full. This is  
indicated by the blinking icons on the status LCD.  
Note: While in the movie clip mode, recording will occur regardless of  
the lighting conditions. Pay special attention to the light conditions  
while in this mode to optimize image quality.  
Using the Self-timer  
The Concord Eye-Q Easy is equipped with a ten second self-timer which  
starts after the shutter button is pressed. The compression level in self-  
timer mode is set at ꢀꢀ.  
Turn the camera on by pressing the Power/Select button.  
1. Scroll through the menu and select the self-timer mode by pressing the  
Power/Select button until the self-timer icon appears.  
2. Press the shutter button. The camera will emit beeping sounds which  
will beep progressively faster until the picture is taken.  
3. The camera will remain in self-timer mode until it is reset manually or  
auto powers off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Deleting pictures and video  
You have the option of deleting the last image captured in each quality  
setting and video mode or you may delete all images and video captured.  
To delete the last image captured:  
1. Scroll through the menu using the Power/Select button.  
2. When you find the quality setting from which youd like to delete,  
press the Delete Last button.  
3. To delete from additional quality settings, continue to scroll through  
the menu.  
To delete all images and video:  
1. Press and hold the delete last button for five seconds.  
2. The camera will emit two beeps confirming the pictures have been  
erased.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
3. Installing the drivers and software  
Installing the software on a Windows PC  
1. Insert the CD-ROM disc into the CD-ROM Drive  
2. The CD-ROM disk will autorun and then another window will appear.  
3. Select the language and then press “ok” to continue.  
4. Press “next” in the welcome page.  
5. Press “yes” to agree and continue with the installation or “No” to disagree  
and quit the installation.  
6. Confirm the destination path. You may use the default path or press  
“browse” to choose another path. Press “Next” to continue.  
7. Select “ArcSoft PhotoImpression 3.0,”or select both software options to  
install. Press "Next" to continue.  
8. Setup the folder in the menu bar, and then press “Next” to continue.  
9. Files will be transferred to your hard-disk. Press “Finish” to complete the process.  
Installing the Camera driver – Concord Eye-Q Easy  
To install the drivers for the Concord Eye-Q Easy:  
1. Plug the square end of the USB cable in your camera and the rectangular  
end in the USB port of your PC located either at the back of your PC or in  
the front panel.  
2. Your Operating System will detect the new hardware and will prompt you to  
install the necessary drivers.  
3. Select the option that allows the operating system to search for the drivers  
in the "driver" from the CD-ROM. Make sure that the Software CD is in your  
CD-ROM drive.  
4. Your operating system has found an update driver for the camera, and also  
some other drivers that might work with the camera. Simply check for driver  
code SE402. Click ‘Next’ to proceed.  
5. There are three drivers to be installed in total and steps 2-3 above will  
repeat 2 more times until all drivers are installed.  
Notes: The 3 drivers for the Concord Eye-Q Easy are the camera driver  
(SE402 Camera), still picture driver, (SE402 Still Camera (WDM)) and video  
driver (SE402 Video Camera (WDM)).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Uploading your pictures to your PC  
1. Make sure that your camera is securely connected to your PC and the  
USB sign appears on the LCD.  
2. Launch the Arcsoft PhotoImpression application.  
3. Click on Get Photos and select “Camera/Scanner.”  
4. Pull down the “Select Source” manual and a list of devices will be  
displayed. Select “SE402 Camera” and click on the “Camera/Scanner"  
button.  
5. You can review individual pictures by selecting the camera/scanner icon  
on the lower left hand corner of the Twain driver screen. If you are  
ready to up load the picture, click on the "Transfer” button. You can  
also check the “All images” box and click on the “Transfer” button.  
This will transfer all pictures in the camera to the PC.  
Note: If the Kodak Imaging application is launched automatically, you  
can upload your images with this application also. You need to pull  
down the "File " manual and select " Select source " to set the  
driver to"SE402 Camera". After that select "Acquire" under "File"  
manual and the twain driver will be launched.  
Working with your pictures  
The PhotoImpression software included with your camera allows you to  
enhance your photos and add details or special effects. Use the help  
menu for more details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Uploading your video clips to your PC  
1. Make sure that your camera is securely connected to your PC and the  
USB sign appears on the LCD.  
2. Launch the Arcsoft PhotoImpression application.  
3. Click on Get Photos and select “Camera/Scanner”.  
4. Pull down the “Select Source” manual and a list of devices will be  
displayed. Select “SE402 Camera” and click on the “Camera/Scanner”  
button.  
5. When the Twain driver screen appears, select the movie tab and click  
on the “Create AVI” button.  
6. You will be prompted to enter a file name for your movie clip and the  
location that you want to save the movie clip.  
7. Click “Open” and the movie clip will be transferred to your PC. Please  
note that the movie clip may take up to 5 minutes to transfer and  
create. Please be patient while the movie clip is being transferred.  
There may be no activity on the screed during the transfer process.  
8. The movie clip AVI file can be played back by using Windows Media  
Player.  
Note: If the Kodak Imaging application is launched automatically, you  
can upload your images with this application also. You need to pull  
down the " File " manual and select " Select source " to set the  
driver to"SE402 Camera". After that select "Acquire" under "File"  
manual and the twain driver will be launched.  
Using the camera as a web cam:  
You may also use the Concord Eye-Q Easy as a web camera and a  
teleconferencing camera. It will work with many popular teleconferencing  
software titles. Select the source as “SE402 Video Camera (WDM)” in the  
video application to launch the video mode. Please consult your video  
software guide for more details. To optimize the image quality, insure that  
there is sufficient lighting. If images are dark or difficult to see, adjust the  
lighting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Uninstalling the software on a Windows PC  
You may uninstall the software when the software is no longer required or  
when the software installation fails.  
1. Turn on your PC and start up Windows.  
2. Open the “My Computer” windows and double-click on the  
“Add/Remove Programs” in the Control Panel.  
3. Select the application to be uninstalled.  
The “Add/Remove Programs Properties” windows appears. Select the  
program to be deleted and click on the “Add/Remove” button.  
4. Select the uninstall method.  
5. You may choose “Automatic” to uninstall all of the software or choose  
“Custom” to uninstall just a portion of the software. Press “Next” to  
begin. If you choose “Custom” you need to select the files, directory  
and registry key which will be uninstalled. Press “Finish” to begin the  
uninstallation.  
Uninstalling the driver on a Windows PC  
You may automatically uninstall the driver using the “Device Manager” in  
the Control Panel.  
1. Connect the camera to your PC.  
2. Turn on your PC and start up Windows.  
3. Open the “My Computer” windows and double-click on “System” in the  
Control Panel.  
4. Open the “Device Manager” page and then select “Imaging device”.  
5. Select “SE402 Camera” under the “Imaging device” and then press  
“remove.”  
Important: The camera must be connected to the PC when uninstalling  
the driver.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
4. Cleaning and maintenance  
Be sure to read this information to ensure that you use your camera  
correctly.  
Places to Avoid  
Do not store or use the camera in the following places or locations:  
• Very humid, dirty or dusty places.  
• In direct sunlight or in places subject to extreme increases in  
temperature such as in a closed car during summer.  
• Extremely cold places.  
• Places subject to strong vibrations.  
• Places affected by smoke or steam.  
• Places subject to strong magnetic fields (such as near motors,  
transformers or magnets.)  
• Keep away from contact with chemicals such as pesticides or next to  
rubber or vinyl products.  
• Do not expose the camera to sand. In sandy locations such as beaches  
or deserts, or in locations where there is wind borne sand, ensure that  
the camera is not exposed to sand. This can cause irreparable damage.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
Storing the camera  
If you do not intend to use the camera for a long period of time, remove  
the batteries before storing the camera.  
Cleaning your Camera  
Use a blower brush to remove dust from the lens and LCD surface and  
then wipe lightly with a soft, dry cloth. If any soiling remains, apply a  
small amount of lens cleaning liquid to a piece of lens cleaning paper  
and wipe gently. Do not scratch hard objects against the lens, LCD screen  
or viewfinder as these surfaces are easily damaged. Clean the body of  
the camera with a soft dry cloth. Do not use volatile substances such as  
thinners, benzine or insecticide, as these may react with camera’s body  
and cause deformaties or remove the coating.  
When traveling overseas  
Do not place your camera in the check-in baggage. Baggage handling at  
airports may subject the camera to violent shocks and the camera may be  
damaged internally even when no external damage is visible.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
5. Troubleshooting  
The troubleshooting guide is designed to help you. If problems continue,  
please contact your local customer support hot-line.  
SYMPTOM  
PROBLEM  
You have lost power to your CONCORD EYE-Q EASY by  
SOLUTION  
All the images I  
have taken do not either:  
appear.  
Insufficient battery power.  
Upload all images to your PC  
as soon as possible. Refer to  
Battery Guidance section in  
the User’s Manual.  
The battery was removed  
before the camera was  
connected to the PC.  
To retain the images in the  
camera’s memory while  
changing the batteries, you  
must first connect the  
camera to a PC via the USB  
cable. The USB will supply  
power to the camera making  
it safe to change the  
batteries.  
I cannot upload  
images to the PC.  
Connection failure.  
Check to make sure all cable  
connections are secure.  
The battery  
indicator is less  
than half.  
There is insufficient  
power.  
To retain the images in the  
camera’s memory while  
changing the batteries, you  
must first connect the  
camera to a PC via the USB  
cable. The USB will supply  
power to the camera making  
it safe to change the  
batteries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
SYMPTOM  
PROBLEM  
SOLUTION  
My CD installation The auto installation file  
Go to the computer desktop.  
Right click on “My  
Computer.” Click on  
“Properties.” Select “Device  
Manager” and double click  
on “CD-Rom.” Double click  
on “CD-R.” Click on  
wizard does not  
work.  
is switched to off or the  
CD ROM is not in the  
drive.  
“Setting.” Ensure “Auto  
insert notification” is  
checked and the  
“disconnect” is selected. If  
you change the settings the  
computer will ask you to  
restart your PC. Click “Yes.”  
The image  
The camera is processing  
the image.  
Wait for the LCD to stop  
flashing and then take your  
next image. You may need  
to wait a further 20 seconds  
before taking the next  
image.  
counter on the  
LCD flashed after I  
took my last  
image.  
I get a blurred  
image when  
uploading my  
images to my  
computer.  
There may be a  
Hold the camera steady until  
you hear a “beep” which  
indicates the exposure is  
completed.  
momentary delay between  
pressing the Shutter  
button and the actual  
exposure.  
I press the shutter The camera allows 3  
button and get no continuous images to be  
Wait for this process to  
complete.  
response.  
taken.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
6. Getting Help  
If you need help with your camera, refer to the Troubleshooting section of  
this manual. If you still cannot find the solution, visit our Web site at  
www.support.concordcam.com. Most support issues are  
answered in the Frequently Asked Questions (FAQ) section.  
Toll Free in the US and Canada:  
• (866) 522-6372  
Toll Free in Europe:  
• UK:  
0800-1696482  
Spain: 900-973195  
Italy: 800-781883  
• Germany: 0800-1800563  
• France:  
Toll:  
0800-917599  
• 31-53-4829779  
For Software Technical Support, please contact:  
In the USA and Canada:  
ArcSoft, Inc.  
46601 Fremont Blvd.  
Fremont, CA 94538  
Monday – Friday  
8:30AM - 5:30PM (PST)  
Tel: (510) 440-9901 Fax: (510) 440-1270  
In Europe:  
Arcsoft, Inc.  
Unit, Shannon Industrial  
Estate  
Shannon, Co. Clare, Ireland  
Tel: +353 (0) 61 702087 Fax: +353 (0) 61 702001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
7. Warranty Information  
LIMITED WARRANTY  
The manufacturer warrants your Concord Eye-Q Easy camera for a period of 1  
year from the date of purchase to be free from defects in material and  
workmanship. The warranty period shall be extended accordingly if applicable  
mandatory legislation in effect on the date of purchase requires a longer  
warranty period. The manufacturer, at its option, will repair or replace or have  
repaired or replaced, at a location selected by the manufacturer, each product  
which is proven to the satisfaction of the manufacturer to be defective in  
material or workmanship. This warranty shall be limited to the camera for  
defects which were not caused by misuse, abuse, improper handling, tampering  
or attempts to repair by the owner or any unauthorized repair service or repair  
man. This warranty is limited solely to the above and applies only for the  
period set forth. We will not be liable for any loss or damage, incidental or  
consequential of any kind, whether based on warranty, contract or negligence  
arising in connection with the sale, use or repair of the product. Our maximum  
liability shall not in any case exceed the sale price. This warranty is for the  
benefit of the original purchaser only. This warranty gives you specific legal  
rights and may vary from jurisdiction to jurisdiction. The manufacturer makes  
no representation or warranties with regard to the contents of the User's Guide  
and Quick Start Guide. Non-Concord brand equipment and software and the  
Concord Eye-Q Easy TWAIN driver distributed with your Concord Eye-Q Easy  
camera are sold "as is" and without warranty of any kind from Concord,  
including any implied warranty regarding merchantability, fitness for a particular  
purpose, and non-infringement of third party rights, and all such warranties are  
disclaimed. The sole warranty, if any, for non-Concord branded items, if any, is  
given by the manufacturer or producer thereof.  
Concord, Concord Eye-Q and the Concord Eye-Q logo are registered trademarks or  
trademarks of Concord Camera Corp., in the United States and/or other countries. Microsoft,  
MS-DOS and Windows are either registered trademarks or trademarks of Microsoft  
Corporation in the United States and/or other countries. Windows is an abbreviated term  
referring to the Microsoft Windows Operation System. Apple, Mac, Macintosh and Power Mac  
are registered trademarks or trademarks of Apple Computer, Inc. in the U.S. and other  
countries. All other brands and product names are either registered trademarks or  
trademarks of their respective owners.  
Copyright 2002 Concord Camera Corp.  
511499-00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Technical Support Hot Line:  
Toll Free In the USA & Canada  
1-866-522-6372  
Toll Free In Europe  
UK: 0800-169-6482  
BELGIUM: 0800-787-57  
FRANCE: 0800-917-599  
GERMANY: 0800-1800-563  
SPAIN: 900-973-195  
ITALY: 800-781-883  
All Other Countries - Toll  
31-53-482-9779  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Clarion CD Player DXZ448R User Manual
Crosley Radio Turntable CR49 User Manual
Delfield Refrigerator SAR User Manual
Delfield Refrigerator UC4427N 6 User Manual
Desa Water Heater GVR35PA User Manual
Digi Switch 90000278_B User Manual
Ducane HVAC Furnace CMPEV050U3 User Manual
Estate Range TGP300T User Manual
Euro Pro Convection Oven TO320 User Manual
Fisher Price Baby Toy 77949 User Manual