4. Use this appliance only for its intended
use, as described in this manual. Do not
use attachments not recommended by the
manufacturer.
5. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly or if it has been dropped or dam-
aged, or dropped into water. Return the
appliance to an authorized service center for
examination and repair.
6. Keep the cord away from heated surfaces.
7. Never use while sleeping.
8. Never drop or insert any object into any
opening.
9. Do not use outdoors or operate where aero-
sol (spray) products are being used or where
oxygen is being administered.
10. Unit is hot when in use. Do not let heated
surfaces touch eyes or bare skin.
11. Do not place the heated unit directly on
any surface while it is hot or plugged in.
12. Never block the air openings of the appli-
ance or place on a soft surface such as a
bed or couch, where the air openings may be
blocked. Keep the air opening free of lint and
other debris.
13. Do not use an extension cord with this
appliance.
14. Do not touch hot surfaces of the appliance.
Use handles or knobs.
15. Before plugging in, read the information
about dual voltage contained in the instruction
section of this manual.
16. Do not attempt to touch the housing of your
appliance near the straightening plates, as it is
hot when in use.
TO STRAIGHTEN HAIR
REMOVABLE COMB
USING INSTANT HEAT, THE 25 VARIABLE
TEMPERATURE SETTINGS AND
Temperature Setting Guide
SAVE THESE
IMPORTANT SAFETY
Hair should be clean and completely dried
before using the straightening iron. For best
results, use a light styling product before blow-
drying hair. Plug the iron into an electrical
outlet. Turn on unit. The power indicator light
should become illuminated. Allow unit to heat
up for several minutes.
Your straightening iron includes a removable
comb attachment. The comb will help to pro-
vide tension and guide your hair as you use
the straightening iron. Be sure to turn iron off
and allow it to cool before removing or attach-
ing the comb. To remove it, hold the iron firmly
with one hand; with your other hand, slide
comb away from the iron. When replacing the
comb, align the comb with the slot on the side
of the iron and slide comb into position. Make
sure the comb locks securely into position.
UNIFORM HEAT RECOVERY SYSTEM
TEMP. CONTROL
HAIR TYPE
INSTRUCTIONS
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety pre-
cautions should always be followed, including
the following:
This styling iron features Conair’s Instant Heat
technology. This Instant Heat technology has
25 variable temperature settings. Every type
of hair, from the finest to the curliest and
most resistant, has a temperature range
that’s gentle and safe for it and helps you
create the look you want. And that’s not
all. Conair’s professional salon standards of
engineering provide you with a Uniform Heat
Recovery System that maintains the iron at
constant temperatures. There is a constant
flow of power to ensure that heat is con-
tinuously delivered for optimal styling results,
unlike other units which lose heat during use.
This provides consistent styling power so
that every strand of your hair is set with the
same level of heat and comes out the same
way for a perfect finish.
Low 1-8
Delicate, thin, easy-to-straighten
Average to thick or treated hair
OPERATING
Medium 9-14
INSTRUCTIONS
Med-High 15-20
High 21-25
Thick or wavy hair
This straightening iron is intended for house-
hold use. Use on Alternating Current (50/60
hertz) only. This unit is designed to be oper-
ated at 120/240 volts A/C.
Hard-to-straighten hair
READ ALL INSTRUCTIONS
BEFORE USING.
KEEP AWAY FROM WATER
To turn off, press Power On/Off button (light
will go off).
Turbo Heat
™
Up to 20°C/68°F burst of heat
for difficult styling spots
Never leave your straightener on and unat-
tended. However, should you fail to turn the
straightener off, it will shut itself off auto-
matically within 60 minutes.
DUAL VOLTAGE
Start with a hair section that is 2" wide and
no more than 1/2" thick. Open the iron and
place a hair section between the two hot
plates, close to the scalp. Trap hair between
the plates by firmly squeezing the handles
together. While maintaining the tension,
slowly pull the unit down along the hair
section toward the end of hair. At the end
of hair section, release the pressure on the
handle and allow the hair section to slide
out. Repeat process on additional sections
of hair until you achieve the hair style you
desire. It may be necessary to repeat pro-
cess on certain areas, depending on the
texture of your hair.
DANGER - Any appliance is electrically
live even when the switch is off. To reduce
the risk of death by electric shock:
This straightening iron will automatically
adjust to the proper voltage. Use an adapter
plug with correct configuration, prior to use
in outlet.
®
STYLING WITH THE NEW SATIN FINISH
EASY-GLIDE CERAMIC-COATED PLATES
WARNING: The straightening iron's ceramic-
coated plates will get very hot within a few
seconds and should not be placed in contact
with the skin after the straightening iron has
been turned on.
1. Always unplug appliance immediately
after using.
2. Do not use while bathing.
3. Do not place or store appliance where it
can fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or
other liquid.
5. If an appliance falls into water, unplug it
immediately. Do not reach into the water.
The plates of your new straightening iron
have a Satin Finish® Easy-Glide ceramic-
coated surface, the newest technology. This
means your hair will glide easily over the
surface of the plates as you’re straightening.
The ceramic-coated surface helps smooth
down flyaways and frizzies. It evenly distrib-
utes heat so that the style you create has a
salon-perfect, silky smooth, shining finish.
Hair also slips right through the plates after
it’s straightened. Styling product residue is
simple to clean off ceramic-coated plates.
GETTING STARTED
The iron’s 25 temperature settings and
Instant Heat technology provide styling
versatility for all hair types. If you have fine
hair, a low temperature will provide the best
results. If you have thick, wavy or hard-to-
straighten hair, keep the heat setting on
high. You can vary the iron’s temperature
according to your particular need!
WARNING - To reduce the risk of burns,
electrocution, fire, or injury to persons:
Some experience is necessary when learning
to use this straightening iron. After using iron
several times, you will learn the ideal way to
straighten and style your hair easily.
1. This appliance should never be left unat-
tended when plugged in.
2. Do not pull, twist, or wrap line cord around
appliance.
3. This appliance should not be used by, on
or near children or individuals with certain
disabilities.
The new ceramic technology is a pleasure
to work with and makes styling your hair
easier and the results more professional.
For faster styling results, we have added a
unique optional Turbo Heat on/off feature.
Press the Turbo button to deliver up to
20°C/68°F more heat in the highest setting,
for maximum styling performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
GET TO KNOW YOUR
STRAIGHTENING IRON
LIMITED TWO YEAR WARRANTY
TURNS CURLS INTO
Instant Heat
USER
Conair will repair or replace (at our option)
your unit free of charge for 24 months from
the date of purchase if the appliance is defec-
tive in workmanship or materials.
SMOOTH HAIR IN SECONDS
WARNING:
MAINTENANCE
Cool Tip
IF YOU THINK THE
POWER IS OFF WHEN
THE SWITCH IS OFF
YOU’RE WRONG.
Your straightening iron is virtually mainte-
nance-free. No lubrication is needed. Keep
all vents and openings clear of dirt and dust.
If cleaning becomes necessary, disconnect
the unit from the power source, allow to cool
and wipe exterior with a cloth. If any abnormal
condition occurs, unplug the unit, allow it to
cool, and return it for repair to an authorized
service representative only. No repairs should
be attempted by the consumer.
Ceramic-coated
To obtain service under this warranty, return
the defective product to the service center
listed below, together with your purchase
receipt and $3.00 for postage and handling.
California residents need only provide proof
of purchase and should call 1-800-3-CONAIR
for shipping instructions. In the absence of a
purchase receipt, the warranty period shall be
24 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS,
OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 24-MONTH DURATION OF
THIS WRITTEN, LIMITED WARRANTY. Some
states do not allow limitations on how long an
implied warranty lasts, so the above limitations
may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF
THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER. Some states do
not allow the exclusion or limitation of special,
incidental, or consequential damages, so the
above limitation may not apply to you.
Plates
KEEP AWAY FROM WATER
Power and Turbo
On Indicator Lights
CAUTION
NEVER allow the power supply cord to be
pulled, twisted, or severely bent. Never wrap
the cord tightly around the appliance. Damage
will occur at the high flex point of entry into
the appliance, causing it to rupture and short
circuit. Inspect the cord frequently for damage.
Stop use immediately if damage is visible or if
unit stops or operates intermittently.
Removable
Comb
Attachment
Before
After
Turbo On/Off
Button
On/Off
Button
Professional
Ceramic
Straightener
Everyone knows that electricity and water
are a dangerous combination. But did you
know that an electric appliance is still
electrically live even if the switch is off? If
the plug is in, the power is on. So when you
are not using your appliances, keep them
unplugged.
STORAGE
When not in use, your appliance is easy to
store. Allow appliance to cool, then simply
put back in the box and store out of reach of
children in a safe, dry location. Do not jerk or
strain cord at plug connections. Do not wrap
the line cord around the appliance. Allow the
cord to hang or lie loose and straight at the
point of entry into the appliance.
25 Variable
Temperature
Settings
Instruction & Styling Guide
For your safety and continued enjoyment
of this product, always read the instruction
book carefully before using.
Service Center
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
Dual Voltage
ALWAYS UNPLUG
SMALL APPLIANCES
®
This warranty gives you specific legal rights,
and you may also have other rights, which vary
from state to state.
©2006 Conair Corporation
150 Milford Road, East Windsor, NJ 08520
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
IB-6495
Model CS19JCS
06PC2050
Download from Www.Somanuals.com. All Manuals Search And Download.
|