Coleman Tent 2000002120 User Manual

BEACH SHADE  
MODEL 2000002120  
To Set Up Beach Shelter (continued)  
6. Insert one end of the grey Crossover Pole into the grommet  
Before you begin  
Read all instructions before set up.  
• Select a level site clear of rocks, branches, and other hard or  
sharp objects, to install your Beach Shade.  
on the web strap on either side of front door. (Fig. 4)  
WARNING: Keep clear of overhead power lines.  
• Do not set up your Beach Shade under trees because of potential  
lightning strikes or falling tree limbs in inclement weather.  
• Secure with all stakes and guylines provided to prevent  
property damage or personal injury.  
• For best results in windy conditions, position narrow end of  
Beach Shade into the wind.  
• Enlist the help of at least one other person to assist you when  
it is time to assemble the Beach Shade.  
Fig. 4  
7. Go to opposite end of the grey pole and gradually apply  
pressure to the pole, forming an arch, until you are able to  
insert the pole tip into the grommet on the web strap. (Fig. 5)  
Pole Descriptions  
Pole  
Pole  
Pole  
Description  
Qty. Dia.  
Repair Kit Replacement Kit  
Main Poles, black  
Crossover Pole, grey  
2
1
8.5mm 5010000541 5010000547  
9.5mm 5010000540 5010000548  
Main Poles (2)  
Crossover Pole (1)  
To Set Up Beach Shade  
1. Unfold Beach Shade and spread out on a clean, level surface  
with the door facing the desired direction. Unzip door.  
(Fig. 1)  
Fig. 5  
8. Go to the back of the  
Beach Shade and  
insert black Main Pole  
tip into the grommet  
on the web strap.  
(Fig. 6)  
Fig. 1  
Fig. 6  
2. Stake down shade corners,  
using the outside grommets on  
the web straps. Keep the floor  
taut. (Fig. 2)  
9. From the front of the Beach Shade, gently pull the black Main  
Pole down until you  
can insert the end into  
the grommet on  
the web strap located  
above the door open  
ing. (Fig. 7)  
Option: Use sand bags to weight  
shelter down, see Fig. 14 & 15.  
Fig. 2  
3. Assemble both Main (black) Poles and the Crossover (grey)  
Pole by interlocking shock-corded sections.  
4. Insert the black Main Poles through the pole sleeve running  
from the front to the back. (Fig. 3)  
5. Insert the grey Crossover Pole through the pole sleeve  
running side to side. (Fig. 3)  
Fig. 7  
Fig. 8  
10. Repeat for the  
second black  
Main Pole.  
(Fig. 8)  
Black Poles  
Grey Pole  
Front of the Beach Shade  
Fig. 3  
(continued on other side)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Conair Thermostat 106 User Manual
Cooper Lighting Indoor Furnishings 132T8 User Manual
Craftsman Chipper 247776370 User Manual
Crown Equipment Hot Beverage Maker EP 10 User Manual
Curtis Flat Panel Television PL4210A 2 User Manual
Digicom Network Router ADSL2+ Router User Manual
Digi Switch 910H User Manual
Electro Voice Speaker System EVID C122 User Manual
EverFocus Home Security System EPTZ2700 User Manual
GE Vacuum Cleaner 106679 User Manual