Owner’s manual
Mode d’emploi
1. PRECAUTIONS
1. When the inside of the car is very cold and
the player is used soon after switching on
the heater, moisture may form on the disc
or the optical parts of the player and proper
playback may not be possible. If moisture
forms on the disc, wipe it off with a soft
cloth. If moisture forms on the optical parts
of the player, do not use the player for about
one hour and the condensation will disap-
pear naturally to allow normal operation.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reason-
able protection against harmful interference in
a residential installation. This equipment gen-
erates, uses, and can radiate radio frequency
energy and, if not installed and used in accor-
dance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interfer-
ence will not occur in a particular installation. If
this equipment does cause harmful interfer-
ence to radio or television reception, which can
be determined by turning the equipment off
and on, the user is encouraged to consult the
dealer or an experienced radio/TV technician
for help.
Manual de instrucciones
■Contents
English
2. Driving on extremely bumpy roads which
cause severe vibration may cause the
sound to skip.
1. PRECAUTIONS...........................................................2
2. CONTROLS.................................................................3
3. BUTTON TERMINOLOGY..........................................4
4. FEATURES..................................................................5
5. HANDLING COMPACT DISCS...................................6
6. DCP (Detachable Control Panel)..............................7
7. OPERATION................................................................8
8. TROUBLESHOOTING ..............................................12
9. ERROR DISPLAYS...................................................13
10.SPECIFICATIONS.....................................................14
3. This unit uses
a
precision mechanism.
Even in the event that trouble arises, never
open the case, disassemble the unit, or
lubricate the rotating parts.
■Table des matières
Français
CAUTION
USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
1. PRÉCAUTIONS.........................................................15
2. COMMANDES.............................................................3
3. NOMENCLATURE DES TOUCHES .........................16
4. CARACTÉRISTIQUES..............................................17
5. MANIPULATION DES DISQUES COMPACTS ........18
6. CLAVIER DE COMMANDE AMOVIBLE (DCP) .......19
7. FONCTIONNEMENT.................................................20
8. DÉPISTAGE DES PANNES......................................24
9. AFFICHAGE DES ERREURS...................................25
10.SPÉCIFICATIONS.....................................................26
BD216
RADIO AM/FM-LECTEUR CD
•
AM/FM CD PLAYER
•
RADIO AM/FM Y REPRODUCTOR CD
■Índice
Español
1. PRECAUCIONES......................................................27
2. CONTROLES..............................................................3
3. NOMENCLATURA DE LOS BOTONES...................28
4. CARACTERÍSTICAS ................................................29
5. MANEJO DE LOS DISCOS COMPACTOS..............30
6. PANEL DE CONTROL DESMONTABLE (DCP) ......31
7. OPERACIÓN.............................................................32
8. SOLUCIÓN DE PROBLEMAS..................................36
9. INDICACIONES DE ERROR ....................................37
10.ESPECIFICACIONES ...............................................38
Bottom View of Source Unit
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS PRODUCT WILL VOID THE WARRANTY AND WILL
VIOLATE FCC APPROVAL.
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2001: Clarion Co., Ltd.
Printed in Malaysia / Imprimé à Malaisie / Impreso en Malasia
Be sure to unfold and read the next page.
Veuillez déployer et vous référer à la page suivante.
Cerciórese de desplegar y de leer la página siguiente.
PE-2420B
280-7643-00
•
2001/1 (D M)
BD216
2
Download from Www.Somanuals.com. All Manuals Search And Download.
4. FEATURES
■ Rotary Encoder Volume Control
■ DIN Chassis with Detachable Control Panel (1DIN, Full DCP feature)
■ Z-Enhancer with 3 Mode Sound Selector
■
® FM Reception System
■ Seek / Manual Up / Down Tuning
■ 8-Times Oversampling Digital Filter and Dual 1-Bit D/A Converters
■ Preset Station Scan (PS), Automatic Store (AS)
■ 2-Channel RCA Line Level Output
■ AM 1 band, FM 4 bands each 5 channels total 25 channels, Preset Memory Function
■ Repeat/Random Play/Intro Music Scan
■ 180W (45 W × 4) Maximum Power Output
Download from Www.Somanuals.com. All Manuals Search And Download.
BD216
5
5. HANDLING COMPACT DISCS
This unit has been designed specifically for play-
Note on Compact Discs
Never stick labels on the surface of the compact
disc or mark the surface with a pencil or pen.
back of compact discs bearing the
No other discs can be played.
mark.
Single CD (8cm) cannot be played with the unit.
To remove the compact disc from its storage
case, press down on the center of the case and
lift the disc out, holding it carefully by the edges.
No
Proper way to hold
the compact disc
Removing the disc
Do not use any solvents such as commercially
available cleaners, anti-static spray, or thinner to
clean compact discs.
Always handle the compact disc by the edges.
Never touch the surface.
No
To remove fingermarks and dust, use a soft
cloth, and wipe in a straight line from the center
of the compact disc to the circumference.
No
Do not use compact discs that have large
scratches, are misshapen, or cracked, etc. Use
of such discs will cause misoperation or damage.
No
New discs may have some roughness around
the edges. The unit may not work or the sound
may skip if such discs are used. Use a ball-point
pen, etc. to remove roughness from the edge of
the disc.
Ball-point pen
Roughness
Do not expose compact discs to direct sunlight
or any heat source.
No
Note:
Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These
•
may get caught in the internal mechanism and damage the disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
BD216
6. DCP (Detachable Control Panel)
The control panel can be detached to prevent
theft. We recommend taking the DCP with you
when leaving the car.
CAUTION
• The DCP can easily be damaged by shocks. After
removing it, place it in a protective case and be
careful not to drop it or subject it to strong shocks.
Removing the DCP
When the release button is pressed and the DCP is
unlocked, the car’s vibrations may cause it to fall.
To prevent damage to the DCP, always store it in a
protective case after detaching it.
•
•
1. Turn off the power.
2. Press the DCP Release button 1.
The rear connector that connects the source unit
and the DCP is an extremely important part. Be
careful not to damage it by pressing on it with fin-
gernails, pens, screwdrivers, etc.
DCP release button
DCP Rear Panel
Source Unit Front
DCP
connector
3. Remove the DCP.
Source unit connector
Note:
If the DCP is dirty, wipe off with a soft, dry cloth only.
•
DCP
Attaching the DCP
1. Insert the side of the DCP into the main unit.
2. Insert the left side of the DCP into the main
unit.
CAUTION
Do not insert the DCP from the left side. Doing so
may damage it.
DCP
Download from Www.Somanuals.com. All Manuals Search And Download.
BD216
7
7. OPERATION
Note:
Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold).
•
Adjusting the Treble
Basic Operations
1) Press A-M button @ and select “TrE”.
CAUTION
2) Turning the Rotary knob 2 clockwise empha-
sizes the treble; turning it counterclockwise
attenuates the treble.
When this unit is turned on, starting and stop-
ping the engine of a car with its volume raised
to the maximum level may harm your hearing.
Be careful about adjusting the volume.
The factory default setting is “0”. (Adjustment
range: –6 to +6)
*
3) When the adjustment is complete, press A-M
button @ several times until the function
mode is reached.
Turning ON the Power and Adjusting
the Volume
1) Press the POWER button 4.
To turn off the power, press the POWER button
4 for 1 second or longer.
*
Adjusting the Balance
1) Press A-M button @ and select “BAL”.
2) Press the FNC button 4 and select another
operation mode. Every time the FNC button
4 is pressed, the display changes the oper-
ation mode as:
2) Turning the Rotary knob 2 clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
Radio ➜ CD ➜ Radio
The factory default setting is “0”. (Adjustment
range: L9 to r9)
*
Note:
If the CD mode is selected when no disc is inserted,
the display flashes “ DISC” and blinking.
•
3) When the adjustment is complete, press A-M
button @ several times until the function
mode is reached.
3) Turning the Rotary knob
2
clockwise
increases the volume; turning it counterclock-
wise decreases the volume.
Adjusting the Fader
The volume level is from 0 (minimum) to 33 (max-
imum).
*
1) Press A-M button @ and select “FAd”.
2) Turning the Rotary knob 2 clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.
Audio Mode Adjustments
Press the A-M button @ to select the adjustment
mode. The mode switches as follows each time
the A-M button is pressed:
BASS ➜ TREB ➜ BAL ➜ FAD ➜ Previous
mode
The factory default setting is “0”. (Adjustment
range: F9 to r9)
*
3) When the adjustment is complete, press A-M
button @ several times until the function
mode is reached.
Adjusting the Bass
1) Press A-M button @ and select “BAS”.
Note:
2) Turning the Rotary knob 2 clockwise empha-
sizes the bass; turning it counterclockwise
attenuates the bass.
Bass and Treble can only be adjusted when the
“Z-enhancer” is off.
•
The factory default setting is “0”. (Adjustment
range: –6 to +6)
*
3) When the adjustment is complete, press A-M
button @ several times until the function
mode is reached.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
BD216
Setting the Z-enhancer
This unit comes with three types of sound tone
effects stored in memory. Select the one you prefer.
Radio Mode Operations
FM Reception
For enhanced FM performance the
tuner includes signal actuated stereo control and
Multipath noise reduction circuits.
®
The factory default setting is “Z-EHCR OFF”.
*
Each time you press Z-EHCR button 5, the
tone effect changes in the following order.
“Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜
“Z-ENHANCER 3” ➜ “Z-EHCR OFF” ➜
“Z-ENHANCER 1”...
Listening to the Radio
1) Press the FNC button 4 to select the radio
• Z-ENHANCER 1: bass emphasized
• Z-ENHANCER 2: treble emphasized
• Z-ENHANCER 3: bass and treble emphasized
• Z-EHCR OFF: no sound effect
mode, then the radio will be on.
2) To select a preset band, press the BND but-
ton 0, then select one of the preset bands
such as FM1, FM2, FM3, FM4, or AM. Every
time the BND button 0 is pressed, the dis-
play will change as:
Switching the Clock Display
FM1 FM2 FM3 FM4
AM
Press and hold the BND button 0, and then
press the DISP button 9 to swith between the
operation mode and the clock display.
3) Press the SRCH Up/Down button ¥, then
the station at which there is a broadcast will
be selected (Seek selection).
Setting the Clock
1) Press and hold the BND button 0, and then
press the DISP button 9 to display the clock
display.
Manual Tuning
1) Press the BND button 0, then select FM1,
2) Press and hold the BND button 0, and then
press the DISP button 9 for 2 seconds or
longer.
FM2, FM3, FM4 or AM.
2) Press and hold the BND button 0 for 2 sec-
onds or longer, then the display will show
“MANU”, which means that a manual selec-
tion function is on.
3) Press the SRCH Up button ¥, then set the
current hour.
4) Press the SRCH Down button ¥, then set
3) Press the SRCH Up/Down button ¥ and
the current minute.
select the right station.
5) Press the BND button 0, then the clock is
set.
Seek Tuning
Notes:
1) Press the BND button 0, then select FM1,
If you select another operation mode while you are
setting the clock, the clock setting operation will be
canceled.
•
FM2, FM3, FM4 or AM.
2) If the “MANU” on the display is on, press and
hold the BND button 0 for 2 seconds or
longer. When the “MANU” display is off, the
Seek Selection function is on.
If you remove the vehicle’s battery for a check or
repair, the clock will be reset, so you must set it again.
•
3) Press the SRCH Up/Down button ¥, then
when it selects the station in which there is a
broadcast, it automatically stops.
Download from Www.Somanuals.com. All Manuals Search And Download.
BD216
9
Preset Memory Function
CD Mode Operations
Preset Memory Function can store up to 25 sta-
tions: five stations for each of FM1, FM2, FM3,
FM4 and AM.
Loading a Disc
Insert a CD into the centre CD insertion slot with
the labeled side facing up, “LOAd” appears in
the display, the CD enters inito the slot and start
playing.
Note:
When the present memory function is used, all the
content of the memory will be erased.
•
Manual memory function
Notes:
Single CD (3”(8 cm)), cannot be played with the unit.
Do not put your hand, fingers, or foreign objects into
the CD insertion slot.
1) Press the BND button 0, and select the
•
•
band you want to store in the memory.
2) Press the SRCH Up/Down button ¥ then
select the station you want to store in the
memory.
If a CD has already been loaded, another CD cannot
be inserted. Do not insert another one forcefully.
•
Discs not bearing the
mark cannot be played
•
•
•
3) Press and hold the Preset button % for 2
seconds or longer, then the station will be
stored in the memory.
with the unit. CD-ROMs cannot be played.
Some CDs recorded in CD-R mode may not be
usable.
CD recorded in CD-RW mode cannot be played with
the unit
Auto store function (Automatic Station Store)
1) Press the BND button 0, then select the
band you want to store in the memory.
Listening to the Disc already Inserted
Press the FNC button 4 to select the CD mode,
the CD will start playing.
2) Press and hold the AS button 6 for 2 sec-
onds or longer, then the station at which the
reception is the strongest will be automatical-
ly stored in the memory.
Stopping (pausing) Playback
Note:
While the CD playing, pressing the Play/Pause
button 8 will stop the CD and “PAUS” indicate.
Press the Play/Pause button 8 again to resume
playback.
When the number of stations stored is less than five,
the previous content of the memory for each direct
button will be retained.
•
Preset Scanning (Preset Station Scan)
Ejecting the CD
Press the Eject button 3, then the CD will be
ejected.
When the PS button 7 is preset, the preset
memory numbers flash and the stations are
tuned in for 7 seconds each in the order in which
they were stored. Press the PS button again to
cancel the preset scanning mode.
Note:
If the ejected CD is left as it is, it will be reloaded after
15 seconds.
•
Top Function
Press the TOP button 0, then the CD will start
playing from the first song (track number 1).
Selecting Tracks (songs)
Press the SRCH Up/Down button ¥.
: Playback will start from the next track.
: Playback will start from the beginning of
the track currently playing. When this
button is pressed again, the CD will play
from the previous track.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
BD216
Fast-Forward and Fast-Backward
Press and hold the SRCH Up/Down button ¥.
: To fast-forward
: To fast-backward
Pressing the SRCH Up/Down button for 1 second or
*
longer will move forward or backward 5 times faster
than normal play, and pressing it for 3 seconds or
longer will do the operation 30 times faster.
Scan Play (Intro Music Scan)
Press the SCN button $, then the display
shows “SCN”, then the CD will play the first 10
seconds of each track of the whole disc. Press
the SCN button $ again to disengage the unit
from scan play.
A scan play will start from the track following the one
currently.
*
Repeat Play
Press the RPT button #, then the display shows
“RPT”, then the track currently playing will be
played repeatedly. Press the RPT button #
again to disengage the unit from repeat play.
Random Play
Press the RDM button !, then the display will
show “RDM”, then the entire tracks on the disc
will be played at random. Press the RDM button
! again to disengage the unit from random play.
Switching between CD Play Time,
Clock Display and CDTrack Number
Press and hold the BND button 0, and then
press the DISP button 9, the display changes in
the following order:
CD Track No.
CD Play Time
Clock Display
Download from Www.Somanuals.com. All Manuals Search And Download.
BD216
11
8. TROUBLESHOOTING
Problem
Cause
Solution
Power does not turn on.
(No sound is produced.)
Fuse is blown.
Replace with a fuse of the same
amperage. If the fuse blows again,
consult your store of purchase.
Incorrect wiring.
Consult your store of purchase.
Compact disc cannot be
loaded.
Another compact disc is
already loaded.
Eject the compact disc before loading
the new one.
Sound skips or is noisy.
Compact disc is dirty.
Clean the compact disc with a soft
cloth.
Compact disc is heaviiy
scratched or warped.
Replace with a compact disc with no
scratches.
Let dry for about 1 hour with the
power on.
Sound is bad directly after Water droplets may form
power is turned on.
on the internal lens when
the car is parked in a
humid place.
Nothing happens when
buttons are pressed.
Display is not accurate.
Microprocessor has
malfunctioned due to
noise, etc.
Turn off the power, then press the
DCP Release button 1 and remove
the DCP.
Press the reset button for about 2
seconds with a thin rod.
Reset button
DCP or source unit
connectors are dirty.
Wipe the dirt off with a soft cloth
moistened with cleaning alcohol.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
BD216
9. ERROR DISPLAYS
■ To protect the system, this unit has been equipped with self diagnostic functions. If a fault
arises, a warning is issued by various error displays. Follow the corrective measures and
remove the fault.
Error Display
Corrective Measure
This error display indicates that a fault has arisen in the
mechanism of the source unit (for example, the disc cannot be
ejected).
Er 2
➜ Check the source unit.
This error display indicates that the pickup focus is off because
of a scratched disc or some other factor during source unit play.
➜ Check the compact disc.
Er 3
Er 6
This indicates that the CD’s TOC (table of contents) cannot be
read, for example because the selected disc is upside-down.
Download from Www.Somanuals.com. All Manuals Search And Download.
BD216
13
10. SPECIFICATIONS
FM Tuner
General
Frequency Range: 87.9 MHz to 107.9 MHz
Usable Sensitivity: 11 dBf
50 dB Quieting Sensitivity: 17 dBf
Alternate Channel Selectivity: 75 dB
Stereo Separation (1 kHz): 35 dB
Frequency Response (±3 dB): 30 Hz to 15 kHz
Power Supply Voltage: 14.4 V DC (10.8 V to 15.6
V allowable), negative ground
Current Consumption: Less than 15 A
Speaker Impedance: 4 Ω (4 Ω to 8 Ω allowable)
Weight: 3.31 lb. (1.5 kg)
Dimensions:
7” (178 mm) Width × 2” (50 mm) Height ×
6” (152 mm) Depth
AM Tuner
Frequency Range: 530 kHz to 1,710 kHz
Usable Sensitivity: 25 µV
7”
(178 mm)
2”
(50 mm)
CD Player
System: Compact disc audio system
Usable Discs: Compact disc
Frequency Response: 10 Hz to 20 kHz (±1 dB)
Signal-to-Noise Ratio: 100 dB (1 kHz) IHF-A
Dynamic Range: 95 dB (1 kHz)
7-3/8”
(188 mm)
2-1/4”
(58 mm)
Harmonic Distortion: 0.01%
Notes:
Specifications comply with EIA Standards.
•
•
Specifications and design are subject to change with-
out notice for further improvement.
Audio
Maximum Power Output:
Please make sure when connecting external power
amplifier, that you properly, to the car chassis, ground
the amplifier.
•
180 W (45 W × 4 ch)
Continuous Average Power Output:
17 W × 4, into 4 Ω, 20 Hz to 20 kHz,1%THD
Bass Control Action (30 Hz): ±13 dB
Treble Control Action (10 kHz): ±12 dB
Line Output (with A/C 1 kHz, 10 kΩ): 1.8 V
If this is not done, severe damage to the source unit
way happen.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
14
BD216
|