Cisco Systems Camcorder Mino2HD User Manual

Get Started  
Camcorder Features  
Connect to Computer  
1 Slide USB latch down. USB arm flips up  
quickstart guide  
Welcome to Flip MinoHDTM  
8
10  
Consult Safety Instructions Before Use.  
4
1
5
1
Press power button to turn on. Camcorder setup  
appears automatically when you first power on.  
automatically.  
7
12  
6
2 Connect USB arm to computer’s USB port.  
1
14  
11  
17  
Note: Camcorder is shipped with a partially charged battery.  
2
15  
• Your camcorder will begin recharging and you  
can install FlipShareTM software on your computer.  
13  
Setting Language  
16  
Use + and – to select your language.  
Setting Date  
9
3
1
Use + and – to adjust the current setting.  
Use < and > to select month/day/year.  
tup  
for se  
Hold  
2
Recharge Battery  
1 Slide USB latch down. USB arm flips up  
Setting Time  
Use + and – to adjust the current setting.  
Use < and > to select hour/minute/am/pm.  
automatically.  
1
2
3
4
5
6
7
8
9
Power Button  
Wrist Strap Hook  
Tripod Mount  
Lens  
Press to turn on/off.  
3
Attach wrist strap, (included in package).  
2 Connect USB arm to computer’s USB port.  
Attach a tripod or a Flip VideoTM accessory. Learn more at www.theflip.com/accessories.  
2
Turning Off Tones  
3 Recording light turns on to indicate charging.  
When charged, the recording light turns off.  
Use < and > to toggle the tones on and off.  
Wipe clean with a soft, dry cloth.  
Recording Light  
Microphone  
USB Latch  
Red light turns on during recording.  
• The camcorder uses a sealed, rechargeable battery.  
Turning Off Recording Light  
Built-in wide-range stereo microphone.  
Use < and > to toggle the recording light on and off.  
• Recharging a discharged battery takes about  
three hours.  
Slide down to release USB arm.  
2
USB Arm  
If space does not permit proper connection, use a USB “A-type extension cable.  
To Return to Camcorder Setup Later  
Starting with the camcorder OFF:  
• The camcorder may remain connected to  
your computer after it is fully charged, but  
disconnecting it will help preserve the  
battery’s lifespan and performance.  
HDMI™ Mini Port  
Recording viewfinder/playback screen.  
1
Press power button to turn on.  
10 Screen  
2 When Flip VideoTM logo appears, press and  
11 Play Button  
12 Delete Button  
13 Record Button  
14 Up Button  
15 Down Button  
16 Left Button  
17 Right Button  
Touch to play/pause. Touch and hold to play all.  
hold record button until SET LANGUAGE appears.  
Touch to delete. Touch and hold to lock/unlock the delete button.  
Press and release to start/stop recording.  
• The optional Flip Video Power Adapter can  
charge the battery in about two hours.  
While Recording: Touch to zoom in. During Playback: Touch to increase volume.  
While Recording: Touch to zoom out. During Playback: Touch to decrease volume.  
While Paused: Touch to skip to previous video. During Playback: Touch and hold to rewind.  
While Paused: Touch to skip to next video. During Playback: Touch and hold to fast-forward.  
Note:Yourcomputermustbepoweredonforthecamcordertocharge.  
Included In This Box  
• Flip MinoHDTM Camcorder • Quickstart Guide  
Record and Play  
Touch-Sensitive Buttons  
Gently touch lighted icons with your finger to  
activate the controls on the back panel.  
Save, Edit, and Share  
View On HD Television  
• Wrist Strap  
• Soft Case  
• Warranty/Safety Info  
1
Power off camcorder and television.  
Flip VideoTM Registration and Support  
2 Connect camcorder to television with  
FlipShareTM preloaded software makes  
organizing, editing, and sharing video  
incredibly simple. When you plug in your  
camcorder, open FLIPVIDEO and launch  
Setup FlipShareTM (PC) or Start FlipShareTM (Mac).  
optional HDMITM Cable from Flip VideoTM  
.
Recording Videos  
1 Press record button to start/stop.  
2 Touch up/down buttons to zoom in/out.  
Declaration of Conformity  
Responsible Party: Cisco Systems, Inc.  
30 Maiden Lane, 6th Floor, San Francisco, CA 94108  
3 Power on camcorder and television.  
• Camcorder screen turns off when  
connected to television.  
FCC Compliance Statement  
This device complies with part 15 of the FCC Rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
Playing Videos  
3 Touch play button to start/pause.  
4 Touch left/right buttons to view previous/next.  
Tip: Hold left/right during playback to rewind/fast-forward.  
FlipShareTM Features  
• Browse, play, and edit your videos.  
• Save your videos to your computer.  
4 Switch your television to VIDEO input.  
• See television manual for instructions.  
Radio and TV Interference  
This equipment has been tested and found to comply with the limits  
My Movies  
5 Touch play button to start/pause playback.  
for a Class B digital device in accordance with the specifications in Part 15  
of FCC rules. These specifications are designed to provide reasonable  
protection against harmful interference in a residential installation.  
This equipment generates, uses, and can radiate radio frequency energy  
and, if not installed and used in accordance with the manufacturer’s  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference  
to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Camcorder  
• Make custom movies with music.  
• Snap photos from your videos.  
• Share your videos online or by email.  
Computer  
My Movies  
Vacations  
Anniversary  
Birthday Party  
Wedding  
Concert  
At The Beach  
Our Dog  
3
2
5
Deleting Videos  
5 Touch delete button. Select YES to confirm.  
Tip: Delete button is locked when you first power on.  
To unlock, press and hold delete button.  
• Upload to FacebookTM, MySpaceTM  
,
YouTubeTM, and others.  
4
1
4
• Reorient or relocate the receiving antenna.  
Baby Videos  
• Increase the separation between the equipment and the receiver.  
• Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
2
• Consult the dealer or an experienced radio/television technician for help.  
The supplied interface cable must be used with the equipment in order to  
comply with the limits for a digital device pursuant to Subpart B of Part 15  
of FCC Rules.  
CAUTION: Changes or modifications to this device not authorized by Cisco,  
Inc. may void the user’s authority to operate this device.  
Canadian ICES-003 Statement:  
This Class B digital apparatus complies with Canadian ICES-003.  
©
2009 Cisco Systems, Inc. and/or its affiliates (“Cisco”). All rights  
reserved. THE FLIP VIDEO LOGO, FLIP VIDEO, FLIP MINO HD, and  
FLIPSHARE are trademarks of Cisco. Designed in the USA. Made in China.  
Note: You can use any brand of HDMI™ Cab
that has an HDMI Connector (Type A) on on
and HDMI Mini Connector (Type C) on the o
Click HELP inside FlipShareTM for  
detailed instructions on all features.  
YouTube are trademarks of their respective owners. Mac is  
a
registered  
trademark of Apple Inc. HDMI, the HDMI Logo and High-Definition  
Multimedia Interface are trademarks or registered trademarks of HDMI  
Licensing LLC.  
600-0130-100  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Belkin Computer Hardware F3U001 User Manual
Bionaire Dehumidifier BU5100 User Manual
Black Decker Welder VP650 User Manual
Bloomfield Coffeemaker 9220 9221 User Manual
Blue Rhino Outdoor Fireplace WAD613T User Manual
Campbell Hausfeld Saw DG411200CK User Manual
Casio Digital Camera EX S770 User Manual
Cerwin Vega Speaker System CVP 118 User Manual
CH Tech Network Card VX462B User Manual
Cisco Systems Network Card OL 1377 02 User Manual