I N S T A L L A T I O N I N S T R U C T I O N S
RSM Elite Series Projector Mounts
RPA Elite Series Projector Mount
RPA Elite Series Projector Mount
RPA Elite Series Projector Mount
RPA Elite Series Projector Mount
RPA Elite Series Projector Mount
RPA Elite Series Projector Mount
RSM A-D
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
RSM Elite Series Projector Mounts
DIMENSIONS
57.8
2.28
BOLT C IRC LE
40.9
1.61
55.4
2.18
40.9
1.61
110.9
4.37
INTERFAC E LOCKING SWITC H
5.6
.22
THREADS ONTO 1-1/2' NPT
PITC H ADJUSTMENT POINT
15
YAW ADJUSTMENT POINT
10
128.7
5.07
46.4
1.83
ROLL ADJUSTMENT POINT
4
NOTE: C USTOM INTERAFC E BRAC KET
NOT SHOWN. THE C USTOM INTERFACE
BRAC KET NEEDED FOR YOUR PROJEC TOR
WILL ADD DEPTH TO INSTALLATION AND
THE MOUNT.
SEE SSM-XXX DRAWING ALSO.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
RSM Elite Series Projector Mounts
Installation Instructions
LEGEND
Pencil Mark
Tighten Fastener
Serrez les fixations
Serrare il fissaggio
Marquage au crayon
Segno a matita
Stiftmarkierung
Befestigungsteil festziehen
Marcar con lápiz
Potloodmerkteken
Marcar com lápis
Apretar elemento de fijación
Bevestiging vastdraaien
Apertar fixador
Drill Hole
Loosen Fastener
Percez un trou
Praticare un foro
Bohrloch
Desserrez les fixations
Allentare il fissaggio
Befestigungsteil lösen
Aflojar elemento de fijación
Bevestiging losdraaien
Desapertar fixador
Perforar
Gat boren
Fazer furo
Adjust
Phillips Screwdriver
Ajuster
Tournevis à pointe cruciforme
Cacciavite a stella
Regolare
Einstellen
Ajustar
Kreuzschlitzschraubendreher
Destornillador Phillips
Afstellen
Ajustar
Kruiskopschroevendraaier
Chave de fendas Phillips
Remove
Retirez
Hex-Head Wrench
Clé à tête hexagonale
Chiave esagonale
Rimuovere
Entfernen
Quitar
Sechskantschlüssel
Llave de cabeza hexagonal
Zeskantsleutel
Verwijderen
Remover
Chave de cabeça sextavada
Optional
En option
Opzionale
Optional
Opcional
Optie
Open-Ended Wrench
Clé à fourche
Chiave a punte aperte
Gabelschlüssel
Llave de boca
Steeksleutel
Opcional
Chave de bocas
Security Wrench
By Hand
Clé de sécurité
À la main
A mano
Chiave di sicurezza
Sicherheitsschlüssel
Llave de seguridad
Veiligheidssleutel
Chave de segurança
Von Hand
A mano
Met de hand
Com a mão
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
RSM Elite Series Projector Mounts
LEGEND
Target of Projector
Hammer
Martillo
Hammer
Martelo
Martello
Hamer
Punto de enfoque del proyector
Ziel des Projektors
Mira do projector
Punto di proiezione
Doel van de projector
Cible du projecteur
Marteau
TOOLS REQUIRED FOR INSTALLATION
7/16"
3/32" (wood)
1/4" (concrete)
PARTS
A (1)
B (1)
All-Points
Security
(Optional)
Kit
Example Only
(Interface bracket
varies dependent
on projector model)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
RSM Elite Series Projector Mounts
Installation Instructions
RSM INSTALLATION
1
(not included)
NOTE: Models RSM-A/RSM-B/RSM-C/RSM-D are
identical EXCEPT each provides a different
keyed lock.
Threaded Pipe Installation
1. Carefully determine required mounting location.
IMPORTANT ! : This will require knowing the lens
to screen distance. See projector specifications
for details on determining this distance.
(not included)
2
4
2. Install 1-1/2" NPT or NPSM following ANSI/ASME
B1.20.1 (Schedule 40, 0.154" minimum thickness
aluminum - ASTM B221) threaded extension
column (not included) into threaded collar until
tight, with a minimum of four threads engaged.
3
WARNING: IMPROPER INSTALLATION CAN
RESULT IN SERIOUS PERSONAL INJURY OR
DAMAGE TO EQUIPMENT! Structural members
MUST be capable of supporting five times the
combined weight of all equipment being mounted.
(A)
3. Align RSM with end of NPT pipe.
4. Thread RSM up onto pipe by turning until hand
tight.
Rough Alignment of RSM
2
1. Turn RSM clockwise or counter-clockwise until
front of mount is facing target.
1
2. Secure RSM to pipe by turning set screw until tight.
CAUTION: DO NOT OVERTIGHTEN! Over
tightening of setscrew can damage threads on pipe.
(A)
3. Turn security screw using a Phillips screwdriver
until set screw cannot be seen through access hole
in RSM.
3
1
(bottom view)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
RSM Elite Series Projector Mounts
INSTALLATION
Wood Stud Installation
1a
1. Carefully determine required mounting location.
IMPORTANT ! : This will require knowing the lens
to screen distance. See projector specifications for
details on determining this distance.
WARNING: IMPROPER INSTALLATION CAN
RESULT IN SERIOUS PERSONAL INJURY OR
DAMAGE TO EQUIPMENT! Structural members
MUST be capable of supporting five times the
combined weight of all equipment being mounted.
1
IMPORTANT ! : The RSM mounts are designed to be
mounted to double 2" x 4" wood stud cross bracing
(1-1/2" on center) between two ceiling joists; with a
maximum drywall covering of 5/8".
x 4
Ø 2.5mm
(Ø 3/32”)
2. Using the RSM as a guide, mark four mounting hole
locations with a pencil or similar tool. Hole locations
must be centered on 2" x 4" cross braces.
2
x 4
3. Drill four 3/32"(2.5mm) dia. pilotholes to a depth of
1-3/4" (45mm) deep.
45mm
(1-3/4”)
3
4. Align four mounting holes in RSM with four pilot
holes.
IMPORTANT ! : Make sure mount is properly
oriented towards target before securing to
structure.
5. Secure RSM to structure using four #10 flat washers
and four #10 x 3" Phillips head wood screws (not
included).
4
(A)
x 4
5
7
Download from Www.Somanuals.com. All Manuals Search And Download.
RSM Elite Series Projector Mounts
Installation Instructions
Concrete Installation
1b
1. Determine mounting location.
WARNING: The RSM is designed to be mounted to a
concrete ceiling with a minimum thickness of 8" and a
maximum drywall covering of 5/8".
1
WARNING: IMPROPER INSTALLATION CAN
RESULT IN SERIOUS PERSONAL INJURY OR
DAMAGE TO EQUIPMENT! Structural members MUST
be capable of supporting five times the combined weight
of all equipment being mounted.
2. Using the RSM as a guide, mark four mounting hole
locations on ceiling using a pencil or similar tool.
x 4
3. Drill four 1/4" (6.3mm) dia. pilot holes to a depth of
2-1/2" (64mm) deep.
2
Ø 6.3mm
(Ø 1/4”)
x 4
64mm
(2-1/2”)
3
4. Align four mounting holes in RSM with four pilot holes.
IMPORTANT ! : Make sure mount is properly
oriented towards target before securing to structure.
4
WARNING: Anchors (not provided) must be installed
into structurally sound solid concrete. Installation into
hollow concrete block, mortar, or concrete that exhibits
cracking, spalling, or other defects may result in failure
of anchor and serious personal injury or damage to
equipment.
x 4
5
5. Install four 3/8" x 2-1/4" Grade 2 concrete anchors
(not included) by inserting into pilot holes and
pounding in until flush with mounting surface.
(A)
6. Secure RSM to structure using four #10 flat washers
and four #10 x 3" Phillips head wood screws (not
included).
x 4
6
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
RSM Elite Series Projector Mounts
Threaded Rod Installation
1
2
1c
The RSM must be suspended from four 1/4" diameter
(minimum) Grade 2 or better threaded rods (not
included) which are secured to unistrut, angle or
channel assembly overhead structural members
(trusses or I-beams) by Grade 2 or better 1/4" channel
nuts (not included).
WARNING: IMPROPER INSTALLATION CAN
RESULT IN SERIOUS PERSONAL INJURY OR
DAMAGE TO EQUIPMENT! Structural members
MUST be capable of supporting five times the
combined weight of all equipment being mounted.
4
(A)
1. Carefully determine required mount position.
IMPORTANT ! : This will require knowing the lens
to screen distance. See projector specifications
for determining this distance.
NOTE: Threaded rod and installation hardware not
included.
2. Secure one end of the threaded rod to the structural
member.
5
3. Install four #10-24 jam nuts on each threaded rod.
4. Install the RSM on the threaded rod.
x 4
NOTE: Hole in the RSM allows socket wrench access
without unit disassembly.
PROJECTOR INSTALLATION
2
IMPORTANT ! : Model RSM uses optional Chief
"SSM" Series interface brackets. (See Parts
drawing.)
Install Interface Bracket
1. Partially thread thumb nuts onto Phillips screws until
screw end is visible in top of thumb screw.
IMPORTANT ! : DO NOT fully tighten thumb
screws at this time.
Example Only
(Interface bracket
varies dependent
on projector model)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
RSM Elite Series Projector Mounts
Installation Instructions
Example Only
2a
(Interface bracket
varies dependent
on projector model)
WARNING: IMPROPER INSTALLATION CAN
LEAD TO PROJECTOR FALLING RESULTING IN
SERIOUS PERSONAL INJURY OR DAMAGE TO
EQUIPMENT. DO NOT substitute hardware. Use only
the hardware provided by the manufacturer.
1
1. Secure interface bracket to mount using installation
instructions and hardware provided with interface
bracket.
NOTE: Interface brackets can be installed using the
optional All-Points Security Kit included with
the SSM mounting solutions.
Install Projector With Interface Bracket
2b
1. Orient projector with interface bracket as shown in
figure 2b at left.
2. Lift projector so that screws with thumb nuts are
aligned with mounting slots in mount base.
3. Slide projector with mounting bracket onto mounting
slots in mount base until screws are seated against
the back of mounting slots. See figure 2b and 2c.
Example Only
WARNING: IMPROPER INSTALLATION CAN
LEAD TO PROJECTOR FALLING RESULTING IN
SERIOUS PERSONAL INJURY OR DAMAGE TO
EQUIPMENT. Make certain mounting slots in mount
base slide under thumb screws and that screws are
seated in the back of slots.
(Interface bracket
varies dependent
on projector model)
(A)
1
(B)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
RSM Elite Series Projector Mounts
Securing Projector with Interface Bracket
to Model RSM Mount
2c
Example Only
(Interface bracket
varies dependent on
projector model)
WARNING: IMPROPER INSTALLATION CAN
LEAD TO PROJECTOR FALLING RESULTING IN
SERIOUS PERSONAL INJURY OR DAMAGE TO
EQUIPMENT. Make certain mounting slots in mount
base slide under thumb screws and that screws are
seated in the back of slots.
1. Verify mounting screws are properly seated in
mounting slots in mount base.
2. Move locking lever to "Locked" position as shown
in figure 2c at left.
3. Insert key into lock and turn to secure projector to
mount.
2
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
RSM Elite Series Projector Mounts
Example Only
ADJUSTMENTS
3
(Interface bracket
varies dependent
on projector model)
YAW Adjustment
1. Loosen YAW adjustment locking screw using a #2
Phillips screwdriver.
3
1
2. Turn YAW micro-adjustment screw right or left using
a #2 Phillips screwdriver until image is properly
aligned on target.
3. Tighten YAW adjustment locking screw using a #2
Phillips screwdriver.
2
Pitch Adjustment
3a
1. Loosen PITCH adjustment locking screw using a #2
Phillips screwdriver.
Example Only
(Interface bracket
varies dependent
on projector model)
2. Turn PITCH micro-adjustment screw right or left
using a #2 Phillips screwdriver until image is
properly aligned on target.
1
3
3. Tighten PITCH adjustment locking screw using a #2
Phillips screwdriver.
2
12
Download from Www.Somanuals.com. All Manuals Search And Download.
RSM Elite Series Projector Mounts
Installation Instructions
Roll Adjustment
3b
1. Loosen ROLL adjustment locking screw using a
#2 Phillips screwdriver.
1
2. Turn ROLL micro-adjustment screw right or left
using a #2 Phillips screwdriver until image is
properly aligned on target.
3
Example Only
(Interface bracket
varies dependent
on projector model)
3. Tighten ROLL adjustment locking screw using a
#2 Phillips screwdriver.
2
13
Download from Www.Somanuals.com. All Manuals Search And Download.
RSM Elite Series Projector Mounts
Installation Instructions
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
RSM Elite Series Projector Mounts
15
Download from Www.Somanuals.com. All Manuals Search And Download.
RSM Elite Series Projector Mounts
Installation Instructions
USA/International
Europe
A
P
F
A
P
F
6436 City West Parkway, Eden Prairie, MN 55344
800.582.6480 / 952.225.6000
877.894.6918 / 952.894.6918
Franklinstraat 14, 6003 DK Weert, Netherlands
+31 (0) 495 580 852
Chief, a products division of
Milestone AV Technologies
+31 (0) 495 580 845
Asia Pacific
A
Office No. 918 on 9/F, Shatin Galleria
18-24 Shan Mei Street
8832-002002 Rev03
¤2014 Milestone AV Technologies
05/14
Fotan, Shatin, Hong Kong
852 2145 4099
852 2145 4477
P
F
Download from Www.Somanuals.com. All Manuals Search And Download.
|