PB8140 / PB8240 / PB8250 Digital Projector
Installation Series
User’s Manual
Welcome
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Optional Accessories ......................................................................................7
Front / Upper View ........................................................................................7
Back View ........................................................................................................7
Bottom View ...................................................................................................7
Connector Panel .............................................................................................8
External Control Panel ...................................................................................9
Remote Control Description .......................................................................10
Installing or Replacing the Batteries ............................................................12
Connecting to Display Devices ....................................................................15
Blank ............................................................................................22
Table of Contents
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Freeze ...........................................................................................24
Using the menus .......................................................................................... 26
2. Image Menu ............................................................................................. 29
3. Source Menu ........................................................................................... 31
4. Control Menu .......................................................................................... 33
5. PIP (Picture In Picture) Menu ................................................................ 35
Cleaning the projector case ......................................................................... 36
Cleaning and replacing the air filters .......................................................... 36
Lamp Replacement ...................................................................................... 38
Indicators ..................................................................................................... 40
Technical Specifications .............................................................................. 45
iv
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
v
Download from Www.Somanuals.com. All Manuals Search And Download.
vi
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Your BenQ projector is designed and tested to meet the latest standards for safety of infor-
mation technology equipment. However, to ensure safe use of this product, it is important
that you follow the instructions mentioned in this manual and marked on the product.
Caution
•
To prevent shock, do not open the
cabinet. There are no user-serviceable
parts inside.
•
Refer servicing to qualified service
personnel.
•
Always open the lens shutter or
remove the lens cap when the
projector lamp is on.
•
Please read this user’s manual before
you operate your projector. Save this
user’s manual for future reference.
•
In some countries, the line voltage is
NOT stable. This projector is designed
to operate safely within a mains
voltage of 100 to 240 volts, but could
fail if power cuts or surges of 10 volts
occur. In areas where the mains
voltage may fluctuate or cut out, it is
recommended that you connect your
projector through a power stabilizer,
surge protector or uninterruptible
power supply (UPS).
•
Do not look straight at the projector
lens during operation. The intense
light beam may damage your eyes.
Important Safety Instructions
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
1. The lamp becomes extremely hot
4.
Do not place this product on an
unstable cart, stand, or table. The
product may fall, sustaining serious
damage.
during operation. Allow the projec-
tor to cool for approximately 45
minutes prior to removing the lamp
assembly for replacement.
5.
To reduce the risk of electric shock,
do not disassemble this appliance.
Take it to a qualified technician
when service or repair is required.
Incorrect reassembly can cause
cause malfunction of the projector
or electric shock when the appliance
is subsequently used.
2.
Do not operate lamps beyond the
rated lamp life. Excessive operation
of lamps beyond the rated life could
cause them to explode on rare
occasions.
3.
Never replace the lamp assembly or
any electronic components unless
the projector is unplugged.
6.
This product is capable of displaying
inverted images for ceiling mount
installation. Please use BenQ’s
Ceiling Mounting Kit for mounting
the unit and ensure it is securely
installed.
2
Important Safety Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions (Continued)
7.
Do not place this projector in any of
the following environments.
- Space that is poorly ventilated or
confined. Allow at least 50 cm clearance
from walls and free flow of air around
the projector.
- Locations where temperatures may
become excessively high, such as the
inside of a car with all windows rolled
up.
8.
Do not block the ventilation holes.
- Do not place this unit on a blanket,
bedding or any other soft surface.
- Do not cover this unit with a cloth or any
other item.
- Do not place inflammables near the
projector.
- Locations where excessive humidity,
dust, or cigarette smoke may
contaminate optical components,
shortening the projector’s life span and
darkening the image.
If the ventilation holes are seriously
obstructed, overheating inside the unit
may result in a fire.
9.
Always place the unit on a level,
horizontal surface during operation.
- Do not use if tilted at an angle of more
than 10 degrees left to right, nor at angle
of more than 15 degrees front to back.
Using the unit when it is not fully
horizontal may cause a malfunction of,
or damage to, the lamp.
- Locations near fire alarms
- Locations with an ambient temperature
above 40°C / 104°F
- Locations where the altitudes are higher
than 10000 feet.
10. Do not stand the unit on end
vertically.
10000
ft.
Doing so may cause the unit to fall over,
causing injury or resulting in damage to
the unit.
Important Safety Instructions
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions (Continued)
11. Do not step on the projector or place 13. Do not place liquids near or on the
any objects upon it.
projector. Liquids spilled into the
projector may cause it to fail. If the
projector does become wet, disconnect
it from the power supply’s wall socket
and call BenQ to have the projector
serviced.
Besides probable physical damage to the
projector, doing so may result in accidents
and possible injury.
12. Do not block the projection lens with
any objects when the projector is under
operation as this could cause the
objects to become heated or deformed
or even a fire. To temporarily turn off
the lamp, press Blank on the projector
or remote control.
4
Important Safety Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Projector Features
The projector integrates high-performance optical engine projection and a user-friendly
design to deliver high reliability and ease of use.
The projector offers the following features:
•
•
•
•
•
•
•
•
Full-function remote control with laser pointer/ remote mouse function
High quality manual zoom lens
One-key auto-adjustment to display the best picture quality
Digital keystone correction to correct distorted images
Adjustable color balance control for data/video display
Ultra-high brightness projection lamp
Ability to display 16.7 million colors
On-screen menus in 10 languages: English, French, German, Italian, Spanish, Russian,
Traditional Chinese, Simplified Chinese, Japanese and Korean.
Switchable Normal/ Economic mode to reduce the power consumption
Powerful AV function to provide high quality AV picture
HDTV compatibility (YPbPr)
•
•
•
•
•
Two PC input terminals and one PC output terminal
Replaceable air filter
The brightness of the projected image will vary depending on the ambient lighting conditions
and contrast/brightness settings.
The lamp brightness will decline over time and may vary within the lamp manufacturers spec-
ifications. This is normal and expected behavior.
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Shipping Contents
The projector is shipped with the cables required for connection to a PC and to video equip-
ment. Carefully unpack and verify that you have all of the items shown below. If any of these
items are missing, please contact your place of purchase.
PB8250
Digital Projector
installation Series
User's Maunal
Projector
Soft Carry Case
User’s Manual
1
0
0
.
1
0
4
9
.
J
P
/N
:
5
3
Batteries
3-2 Power Converter User’s Manual CD Quick Start Guide Warranty Booklet
Remote Control
S-Video Cable
RCA Audio/Video
Cable
VGA Cable
PC Audio Cable
US
EU
UK
USB Cable D-Sub - DVI Cable Power Cord 110V Power Cord 220V Power Cord 240V
Component Video Cable
6
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
1.
2.
3.
Macintosh adapter
250W / 300W lamp module
Ceiling mount kit
4.
5.
6.
Wireless Pro
Presentation Pro
DVI-I cable
Projector Exterior View
Front / Upper View
External control panel
information.)
Projection lens adjuster
Projection lens
Kensington lock slot
Front adjuster button
Front IR remote sensor
AC power inlet
Main power switch
Air filter grill
Front adjuster button
Back View
Ventilation grill
Back IR remote sensor
Connector panel
information.)
Rear adjuster
Lamp door
Bottom View
Front adjuster
Front adjuster
Rear adjuster
Rear adjuster
Introduction
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connector Panel
S-Video jack
RGB signal input
(PC/ YPbPr/ YCbCr)
DVI-I connector
RS 232 control port
For external control
systems and used by
service personnel.
RGB signal output
Audio/ Video
connector
PC Audio jack
USB connector
8
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Functions
External Control Panel
13
12
10
11
9
5
3
1
2
6
4
8
7
1.
2.
mation.)
mation.)
Turns the projector on or off.
information.)
Used to hide the screen image. You can
press Blank again or Return to bring
the image back.
9.
Power indicator light
Sequentially selects the input signal
RGB, DVI, YPbPr, S-Video or Video.
3 Left
Lights up or flashes when the projector
is under operation.
3.
4.
Right 4
10. Temperature warning light (Refer to
Flashes red if the projector’s
temperature becomes too high.
for more information.)
When the on-screen menu is not
activated, #3 and #4 function as
Keystone -/+ hot keys.
5Exit
5.
6.
Indicates the status of the lamp. Lights
up or flashes when the lamp has
developed a problem.
Exits and saves the menu settings.
6Menu
Turns the on-screen display control
menu on.
12. Zoom ring
Adjusts the size of the image.
13. Focus ring
When the on-screen menu is activated,
the #3 to #6 buttons are used as
directional arrows to select the desired
menu items and to make adjustments.
mation.)
Adjusts the focus of the projected
image.
7.
Automatically determines the best
picture timings for the displayed
image.
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Remote Control Description
Front View
6Down/
3 Left/ Keystone -
L-Click/
Notes on Remote Control Operation
Make sure that there are no obstacles between the remote control and the IR sensors on the
projector that might obstruct the infra-red beam.
10
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Effective Range
Infra Red (IR) remote control sensors are located on the front and the back of the projector.
The remote control must be held at an angle within 30 degrees of the projector’s IR remote
control sensors to function correctly. The distance between the remote control and the sen-
sors should not exceed 6 meters (19.5 feet).
6m
Warning Messages on the Back of the Remote Control
The laser beam is visible. It
is necessary to depress
the Laser button for contin-
uous output.
The laser pointer is not a
toy. Parents should be
mindful of the dangers of
laser energy and keep this
remote control out of the
reach of children.
ATTENTION
LASER DIODE
ACHTUNG
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Installing or Replacing the Batteries
Position the lid over
the compartment
and snap it back
into place.
Install batteries as
indicated by the
diagram inside the
compartment.
Push and open the
battery compartment
lid in the direction
shown.
2
3
1
Avoid excessive heat and humidity. There may be danger of an explosion if the batteries are
incorrectly replaced. Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of the used batteries according to the manufacturer’s instructions.
12
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Your Projector
Choosing a Location
Your projector is designed to be installed in the four installation configurations shown here:
Floor front, Ceiling front, Floor rear, Ceiling rear. Your room layout or personal preference
will dictate which installation configuration you use.
I. Floor front
II. Ceiling front
IV. Ceiling rear
III. Floor rear
If you place the projector above or below the screen, you have to tile it down or up to center
the image on the screen, in these situations image distortion will occur. Use the Keystone
Making Connections
When connecting a signal source to the projector, be sure to:
1.
2.
3.
Turn all equipment off before making any connections.
Use the correct signal cables for each source.
Ensure the cables are firmly inserted.
Setting Up Your Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Connecting to a Laptop or Desktop Computer
RGB
VGA cable
RGB
RGB
VGA cable
RGB
USB
USB
PC audio
USB cable
PC audio
Audio cable
A Mac adapter (an optional accessory) may be necessary if you are connecting to an older
Macintosh computers.
The USB cable is required if you intend using mouse functions on the remote control.
Connecting Equipment to the Component Video Input
Component Video cable
RGB
YPbPr
AV equipment
The projector is capable of displaying various High Definition TV display modes. Some of
these sources are:
•
•
Digital-VHS (D-VHS) player
Satellite Dish HDTV receiver
•
•
DVD player
Digital TV tuners
Most of these sources will provide an analog component video output, a standard VGA out-
put, or a YPbPr (default) format.
The projector is capable of accepting HDTV data through a Component Video connector.
Use a Component Video cable that came with your projector to display these images.
The following standards are supported in the HDTV function:
•
•
•
480i
•
•
•
480p
576i
576p
720p (50/ 60 Hz)
1080i (50/ 60 Hz)
14
Setting Up Your Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Video or S-Video Devices
S-Video devices
S-Video cable
RCA Audio/Video cable
Video devices or VCR
RCA Audio/Video cable
If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the video source is turned on and operating cor-
rectly. Also check that the signal cables have been connected correctly.
Connecting to Display Devices
If you want to monitor your presentation close-up on a monitor as well as on the screen, you
can connect the RGB signal output port on the projector to an external monitor with a VGA
cable or D-Sub - DVI cable.
VGA cable or D-Sub - DVI
cable
Setting Up Your Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Adjusting the Height
The projector is equipped with 2 quick-release adjuster feet.
1.
Lift the projector up and press the
adjuster button to release the
adjuster. The adjuster will drop
into position and be locked.
2.
Screw the rear adjuster feet to
fine-tune the projection angle.
If the screen and the projector are not per-
pendicular to each other, the projected
image becomes vertically trapezoidal. To
correct this situation, adjust the value of
Keystone in the Display menu, on the projec-
tor control panel or on the remote control.
Screen Size
Place the projector at the required distance from the screen according to the required picture
size (see the table on the next page).
Focus ring
Zoom
ring
16
Setting Up Your Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen size chart (4:3 aspect ratio)
Distance
from
screen
Diagonal measurement Distance
Diagonal measurement
Minimum Maximum
zoom zoom
from
screen
Minimum
zoom
Maximum
zoom
feet inch feet inch feet inch
meter cm meter
cm
meter
cm
4
6
8
48
72
96
120
144
168
192
2.49 29.9 3.05 36.6
3.73 44.8 4.57 54.9
4.98 59.7 6.10 73.2
6.22 74.7 7.62 91.4
7.47 89.6 9.14 109.7
8.71 104.5 10.67 128.0
9.96 119.5 12.19 146.3
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
0.62
0.93
62.2
93.3
0.76
1.14 114.3
76.2
1.24 124.5 1.52 152.4
1.56 155.6 1.91 190.5
1.87 186.7 2.29 228.6
2.18 217.8 2.67 266.7
2.49 248.9 3.05 304.8
2.80 280.0 3.43 342.9
3.11 311.2 3.81 381.0
3.42 342.3 4.19 419.1
3.73 373.4 4.57 457.2
4.04 404.5 4.95 495.3
4.36 435.6 5.33 533.4
4.67 466.7 5.72 571.5
4.98 497.8 6.10 609.6
5.40 539.8 6.48 647.7
10
12
14
16
18
20
22
24
26
28
30
32
34
216 11.20 134.4 13.72 164.6
240 12.45 149.4 15.24 182.9
264 13.69 164.3 16.76 201.2
288 14.94 179.2 18.29 219.5
312 16.18 194.2 19.81 237.7
336 17.42 209.1 21.34 256.0
360 18.67 224.0 22.86 274.3
384 19.91 239.0 24.38 292.6
408 21.16 253.9 25.91 310.9
Screen size chart (16:9 aspect ratio)
Distance
from
Diagonal
ment
measure- Distance
from screen
Diagonal measurement
screen
Minimum Maximum
zoom zoom
feet inch feet inch feet inch
Minimum
zoom
Maximum
zoom
meter
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
cm
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
meter
cm
meter
cm
4
6
8
48
72
96
2.29 27.5 2.80 33.6
3.44 41.3 4.20 50.4
4.59 55.1 5.60 67.2
0.57
0.86
57.4
86.0
0.70
70.0
1.05 105.0
1.15 114.7 1.40 140.0
1.43 143.4 1.75 179.4
1.72 172.1 2.10 209.9
2.01 200.8 2.45 244.9
2.29 229.4 2.80 279.9
2.58 258.1 3.15 314.9
2.87 286.8 3.50 349.9
3.15 315.5 3.85 384.9
3.44 344.1 4.20 419.9
3.37 372.8 4.55 454.9
4.02 401.5 4.90 489.8
4.30 430.2 5.25 524.8
4.59 458.9 5.60 559.8
10
12
14
16
18
20
22
24
26
28
30
32
120 5.74 68.8 7.00 84.0
144 6.88 82.6 8.40 100.8
168 8.03 96.4 9.80 117.6
192 9.18 110.1 11.20 134.4
216 10.32 123.9 12.60 151.2
240 11.47 137.7 14.00 167.9
264 12.62 151.4 15.39 184.7
288 13.77 165.2 16.79 201.5
312 14.91 179.0 18.19 218.3
336 16.06 192.7 19.59 235.1
360 17.21 206.5 20.99 251.9
384 18.35 220.3 22.39 268.7
The recommended focus range is from 1.5 ~ 8 meters (6 ~ 32 feet).
There is 3% ~ 5% tolerance among these numbers due to optical component variations.
* 1 m = 3.28 feet, 1 foot = 0.305 m, 1 m = 100 cm, 1 foot = 12 inches
Setting Up Your Projector
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Start Up
1.
Switch all of the connected equipment on.
2.
Plug the power cord into the projector and into a wall socket.
3.
4.
Turn on the wall socket switch (where fitted).
Turn the main power switch on. The Power indicator lights orange.
5.
Press and hold Power on the remote control or projector to start the unit. The Power
indicator light flashes green when the power is turned on.
6.
7.
The start up procedure takes about 30 seconds after pressing Power. In the later stage
of start up, a default BenQ logo appears.
Next, the projector starts to search input signals. Irrespective of selected input source,
the screen shows “Acquiring Signal” at the bottom right corner of the screen. If
there is no input source detected, one of six messages will be displayed on the screen
18
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
continuously: “Analog RGB Searching”, “ DVI-A Searching”, “ DVI-D Searching”,
“Analog YPbPr Searching”, “ S-Video Searching”, “ Composite Video Searching”.
You can also press Source on the projector or remote control to select your desired
8.
If the frequency/ resolution of the input signal exceeds the projector’s operating range, you
will see the message “Out of Range” displayed on a blank screen.
Shutdown
1.
Press Power and a warning mes-
sage appears. To turn the projec-
tor off, press Power again.
2.
The Power indicator light flashes
orange and the lamp shuts down,
the fans continue to run for
approximately 90 seconds to cool
down the projector.
To protect the lamp, the projector will
not respond to any commands during
the cooling process.
3.
Turn the main power switch off.
4.
Disconnect the power cord from the wall socket.
Do not unplug the power cord before the projector shutdown sequence is complete or during
the 90-second cooling down process.
If the projector is not properly shut down, to protect the lamp, when you attempt to re-start the
projector within hours, the fans will run for a few minutes to cool down. Press Power again to
start the projector after the fans stop.
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Digital Keystone Correction
Keystoning refers to the situation where the projected image is noticeably wider at either the
top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting
the height of the projector, you will
need to manually correct it follow-
ing ONE of these steps.
1. Press 3 Left/ Right 4 (hot key)
on the control panel of the projec-
tor to display the status bar labelled
Keystone. Press Right 4to correct
keystoning at the top of the image.
Press 3 Left to correct keystoning
at the bottom of the image.
2. Press 3 Keystone/ Keystone 4
on the remote control to display the
status bar labelled Keystone. Press
Keystone 4 to correct keystoning
at the top of the image. Press 3
Keystone to correct keystoning at
the bottom of the image.
3. Press Menu key on the projector or the remote control. Go to
Display --> Keystone
and adjust the values by pressing 3 Left/ Right 4 on the projector or 3 Keystone/ Key-
stone 4 on the remote control.
For example,
1. Press Right 4 on the projector or
2. Press Keystone 4on the remote control
or
3. Press
4
Right on the projector or
Keystone4 on the remote control when you
are in Display --> Keystone menu.
Keystone
Keystone
0
+16
1. Press 3 Left on the projector or
2. Press 3 Keystone on the remote control
or
3. Press 3 Left on the projector or 3 Key-
stone on the remote control when you are in
Picture --> Keystone menu.
Keystone
Keystone
0
-16
20
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Source Selection
To sequentially select input sources, press
Source on the projector control panel or the
remote control. It may take you a few sec-
onds when the projector is searching for
input signals. The selected source will be
displayed at the bottom right of the screen
for 3 seconds.
Auto Adjustment
In some cases, you may need to optimize the
picture quality. To do this, press Auto on the
control panel of the projector or on the
remote control. Within 3 seconds, the built-
in Intelligent Auto Adjustment function will
re-adjust the values of Frequency and Clock
to provide the best picture quality.
The current source information will be dis-
played at the bottom right of the screen for
3 seconds, as below.
Analog RGB
1280 x 854 / 60Hz
Presentation Mode
The screen will be blank while Auto is functioning.
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Blank
In order to draw the audience’s full atten-
tion to the presenter, you can use Blank to
hide the screen image. Press Blank again to
restore the image. A word “BLANK” appear
at the bottom right corner of the screen
when the image is hidden.
BLANK
Zoom / Focusing
Adjust the projected image to your desired size
using the lens’ zoom ring. Then focus the image by
rotating the focus ring. Refer to the screen size table
Focus ring
Zoom
ring
Laser Pointer Operation
The Laser Pointer is a presentation aid for professionals. It
emits red colored light when you press it and the LED indica-
tor lights up green. Do not look into the laser light window or
shine the laser light beam on yourself or others. Refer to the
warning messages on the back of the remote control and the
attached “User Information” prior to using it.
22
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Mouse Function Operation
Connect the projector to your PC or notebook
with a USB cable prior to using these functions.
The Mouse Pad can take over the PC or notebook
mouse function. When the displayed image is mag-
nified, use the Mouse Pad to move around the dis-
play areas.
The L-Click and R-Click act as the Left (L) and
Right (R) buttons of a computer mouse.
The Drag toggles between ON and OFF for the
drag function of the remote mouse.
Zoom In + / Zoom Out -
By pressing Zoom +, the center of the picture will be magnified.
When the + button is pressed again, the picture is further magni-
fied. Use the Mouse Pad to navigate the image. By pressing Zoom -
, the size of the image is reduced. When the - button is pressed
again, the picture is further reduced until it is restored to the origi-
nal size. You can also restore the actual image size by pressing
Return.
Volume Adjustment
Adjust the loudness by pressing Volume + / - . Or press Mute to
mute the sound.
PIP (Picture In Picture) Operation
By pressing the PIP-Source, PIP-Pos and PIP-Size hot
keys, you can enable the PIP (Picture In Picture)
function and choose the position and size of the PIP
image.
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Freeze
The image is frozen when Freeze is pressed. An icon
will
appear in the lower right corner of the screen. To release the
function, press Freeze again, Return or Source (this will
change the input source and release the pause function).
Preset Mode Selection
Press Preset to select a operation mode that suits your need.
There are several operation modes available for different
types of signals.
PC / DVI Signal Input
Presentation
YPbPr / S-Video / Video Signal Input
Gaming Video Cinema
Vivid
Video
Economic
Economic
24
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operation
Menu System
Please note that the OSD menus vary according to the signal type selected.
Functions available when receiving different signal types...
YCbCr (480i/
576i) / S-Video
/ Video
YPbPr (480p/
576p/ 720p/
1080i)
Analog RGB /
DVI-A
Sub-Menu
Display
DVI-D
Keystone
Brightness
Contrast
Phase
Keystone
Brightness
Contrast
Phase
Keystone
Brightness
Contrast
Color
Keystone
Brightness
Contrast
H Size
Lamp Hour
H Size
Tint
Lamp Hour
Lamp Hour
Ratio
H Position
V Position
Color
Lamp Hour
Auto Resize
H Position
V Position
Color Temp
Information
Ratio
System
Sharpness
Color Temp
Information
Auto Resize
Color Temp
Information
Image
Tint
Color Temp
Mirror
Source
Volume
Treble
Bass
Source
Mute
Language
OSD -- OSD Pos., OSD Time
Setup -- Source Scan, Keystone Hold, Mirror Hold, Blank Time, Auto Off,
User Logo
Economic Mode
Control
Preset Mode --
(PC/ DVI signal input only) Presentation Mode, Vivid Mode, Video Mode, Eco-
nomic Mode
(YPbPr/ YCbCr/ S-Video/ Video signal input) Gaming Mode, Video Mode, Cin-
ema Mode, Economic Mode
Reset
High Altitude
Main Page:
PIP Source
PIP Size
Sub Page:
Brightness
Contrast
Color
PIP Pos.
PIP
H Position
V Position
More Options
Tint
Sharpness
System
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Using the menus
The projector is equipped with on-screen display (OSD) menus for making various adjust-
ments and settings.
The following example describes the adjustment of the keystone.
1.
Press Menu on the projector or remote
control to turn the on-screen menu on.
4.
Adjust keystone values by
pressing 3 Left/ Right 4on the
projector or 3 Keystone/
Keystone 4 on the remote
control.
2.
3.
Use 3 Left/ Right 4on the projector or
3 Keystone/ Keystone 4 on the remote
control to select Display menu.
5.
Press5Exit on the projector or
press
Exit twice* on the
remote control to leave and save
the settings.
Use 5Exit or 6Menu on the projector
or 6Down/
Menu on the remote
*The first press leads you back to the
submenu and the second press closes
the on-screen menu.
control to select Keystone.
26
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Display Menu
Analog RGB/ DVI-A/ YPbPr (480p, 576p, 720p, 1080i) signal input
FUNCTION
DESCRIPTION
mation.
Keystone
Adjusts the brightness of the image. The higher the value, the brighter
the image. And lower the setting, darker the image. Adjust this control
so the black areas of the image appear just as black and that detail in the
dark areas is visible.
Brightness
+25
0
-25
Adjusts the degree of difference between dark and light in the image.
The higher the value, the greater the contrast.
Contrast
Phase
+25
-25
0
This function allows you to adjust the clock
phase to reduce image distortion.
Adjusts the horizontal width of the image.
H Size
Displays the number of hours the lamp has been used.
Lamp Hour
DVI-D signal input
FUNCTION
DESCRIPTION
As above.
As above.
As above.
As above.
Keystone
Brightness
Contrast
Lamp Hour
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
27
YCbCr (480i, 576i)/ S-Video/ Video signal input
FUNCTION
DESCRIPTION
As above.
Keystone
As above.
Brightness
Contrast
Color
As above.
Increases or decreases the color intensity of the image.
Adjusts the color tones of the image. The higher the value, the more red-
dish the image becomes. The lower the value, the more greenish the
image becomes.
Tint
As above.
Lamp Hour
28
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Image Menu
Analog RGB/ DVI-A signal input
FUNCTION
DESCRIPTION
Makes the best fit of the image to the screen,
Auto Resize
1. On 2. Off 3. 16:9
Adjusts the horizontal posi-
tion of the projected image.
H Position
V Position
-30
+30
Adjusts the vertical position
of the projected image.
+30
-30
Adjusts the white color. The higher the value, the more reddish white the
image becomes. The lower the value, the more bluish white the image
becomes.*
Color Temp
Information
Shows the current image resolution.
*About color temperatures:
There are many different shades that are considered to be “white” for various purposes. One
of the common methods of representing white color is known as the “color temperature”. A
white color with a low color temperature appears to be reddish white. A white color with a
high color temperature appears to have more blue in it.
DVI-D signal input
FUNCTION
DESCRIPTION
As above.
Auto Resize
As above.
As above.
Color Temp
Information
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
29
YPbPr (480p, 576p, 720p, 1080i) signal input
FUNCTION
DESCRIPTION
Users have 2 options for the image ratio.
Ratio
1. 4 : 3 2. 16 : 9
As above.
H Position
V Position
Color
As above.
Increases or decreases the color intensity of the image.
Adjusts the color tones of the image. The higher the value, the more red-
dish the image becomes. The lower the value, the more greenish the image
becomes.
Tint
As above.
Color Temp
YCbCr (480i, 576i)/ S-Video/ Video signal input
FUNCTION
DESCRIPTION
As above.
Ratio
Shows the Video input system format,
System
1.NTSC 2. PAL 3.SECAM 4. YUV.
Adjusts the image to make it look sharper or softer.
Sharpness
Color Temp
Information
As above.
As above.
30
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Source Menu
FUNCTION
DESCRIPTION
The projector can be installed on a ceiling or behind a screen, or with one
or more mirrors. Contact your dealer for the ceiling mount bracket
(optional accessory) if you need to install the projector on your ceiling.
•
•
•
Floor front: Select this setting
with the projector set on the
floor and audience viewing the
projected images from the front
side of the screen. This is the
most common setting.
Ceiling front: Select this setting
with the projector suspended
from the ceiling and audience
viewing the projected images
from the front side.
Mirror
Floor rear: Select this setting
when the projector is placed near
the floor and behind the screen.
A special rear projection screen is
required.
•
Ceiling rear: Select this setting
when the projector is suspended
from the ceiling and placed
behind the screen. A special rear
projection screen is required.
Shows the current signal source.
Adjusts the volume level.
Source
Volume
Adjusts the treble level. (-5 ~ 5)
Treble
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Adjusts the bass level. (-5 ~ 5)
Bass
Mute
On
Off
32
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Control Menu
FUNCTION
DESCRIPTION
Language sets the language for the OSD control menus.
Use the 3 / 4 key to select the desired language from among English,
French, German, Italian, Spanish, Russian, Traditional Chinese, Simplified
Chinese, Japanese and Korean.
Language
OSD
OSD Pos.
Selects a desired OSD position.
OSD Time
Sets the length of time the OSD will remain active after your last button
press. The range is from 5 to 60 seconds.
Source Scan
Sets whether the projector searches automatically for input signals. If the
source scan is on, the projector will search for input signals in the follow-
ing order: Analog RGB --> DVI-A --> DVI-D --> Analog YPbPr --> S-
Video --> Composite Video until it acquires a signal. If the function is not
activated, the projector selects the last input signal.
Keystone Hold
When selected, preserves the last keystone correction value even when the
projector is restarted.
Mirror Hold
When selected, preserves the last mirror correction value even when the
projector is restarted.
Setup
Blank Time
Determines the length of time before the projector will automatically
shutdown when Blank is activated.
Auto Off
Sets the length of time before the projector will automatically shutdown
when there is no input signal detected.
User Logo
Enables the user to select which logo screen will appear during projector
start-up. Three modes are available: Default (BenQ logo), black screen or
blue screen.
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Preset modes are provided so you can optimize your projector image set-
up to suit your program type.
PC/ DVI Signal input
1.
2.
3.
4.
Presentation Mode: Is designed for presentations. The brightness is
emphasized in this mode.
Vivid Mode: Is perfect for playing games. The color saturation and
brightness are well-balanced.
Video Mode: Is suitable for cinematic enjoyment displaying images
in their natural color.
Economic Mode: Use this mode to reduce the system noise and
reduce the power consumption by 20%. The lamp life is also
extended with lower light output.
Preset Mode
YPbPr/ YCbCr/ S-Video/ Video Signal Input
1.
2.
3.
4.
Gaming Mode: Is suitable for playing video games in a bright living
room.
Video Mode: With a higher color temperature, it is suitable for
enjoying TV movies.
Cinema Mode: With a lower color temperature, it is suitable for
enjoying cinematic movies.
Economic Mode: Use this mode to reduce the system noise and
reduce the power consumption by 20%. The lamp life is also
extended with lower light output.
Returns all settings to the factory preset values.
Reset
A mode for extreme environments like high altitude and high tempera-
ture. We recommend you use the High Altitude mode when your environ-
ment is higher than 3000 feet, or is hotter than 40℃.
Operation under "High Altitude Mode" may cause a higher decibel oper-
ating noise level because of increased fan speed necessary to improve over-
all system cooling and performance.
High Altitude
If you use this projector under other extreme environments excluding the
above, it may display auto shut-down symptoms, which is designed to
protect your BenQ projector from over-heating. In cases like this, you
should switch to High Altitude mode to solve these symptoms. However,
this is not to state that this projector can operate under any and all harsh
or extreme environments.
34
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
5. PIP (Picture In Picture) Menu
Your projector is capable of displaying images simultaneously from two input sources, which
enhances your presentation in a more effective way.
These functions are available only when the input source is PC and the PIP source is Video
or S-Video.
FUNCTION
DESCRIPTION
Selects the source for the PIP.
PIP Source
Press the 3 / 4 keys to scroll through the four alternatives: Off, Small,
Medium, Large.
PIP Size
When the resolution of the PC signal is 1280 x 1024 (SXGA), the
selected Large PIP size will be reduced to the Medium size.
Selects a desired position for the PIP.
PIP Position
Adjusts the horizontal position of the PIP image.
Adjusts the vertical position of the PIP image.
H Position
V Position
Press the 3 / 4 keys to select more PIP functions including Brightness,
Contrast, Color, Tint, Sharpness and System.
More Options
Brightness
Contrast
Adjusts the brightness of the PIP image.
Adjusts the degree of difference between dark and light in the PIP image.
The higher the value, the greater the contrast.
Increases or decreases the color intensity of the PIP image.
Color
Adjusts the color tones of the PIP image. The higher the value, the more
reddish the image becomes. The lower the value, the more greenish the
image becomes.
Tint
Adjusts the image to make it appear sharper or softer
Sharpness
System
Shows Video input system format, NTSC, PAL, SECAM or YUV.
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Maintenance
Your projector needs little maintenance. Things you have to do on a regular basis are keep
the lens clean and clean the air filter to prevent overheating.
Never remove any parts of the projector except the lamp and air filter. Contact your dealer if
other parts needs replacing.
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface.
ꢀ Use a canister of compressed air to remove dust.
ꢀ If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens cleaner to
gently wipe the lens surface.
Never rub the lens with abrasive materials.
Cleaning the projector case
Before you clean the case, turn the projector off and unplug the power cord.
ꢀ To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.
ꢀ To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent.
Then wipe the case.
Never use wax, alcohol, benzene, thinner or other chemical detergents. These can damage the
case.
Cleaning and replacing the air filters
It is necesssary to clean the air filters periodically. If the filters are not cleaned, they can
become clogged with dust and prevent proper ventilation. This can cause overheating and a
malfunction of the projector.
A warning message like the one pictured to the
right will be displayed for 10 seconds every 300
hours to remind you to clean the filters.
1.
Turn the project off and wait until the fans
stop running.
2.
3.
Disconnect the projector from any cables.
Open one air filter cover from the left and draw another one from the front sides of the
projector.
From the left side:
From the front side:
36
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
5.
Use a small vacuum cleaner designed for computers
and other office equipment to clean the filters. Or
use a soft brush (such as a clean artist’s paintbrush)
to gently sweep the dust away.
If the dirt is difficult to remove or the filters are
broken, contact your place of purchase to replace
them.
Replace the filters then press the covers back until
they click into place.
If the covers are not correctly seated in place, you
will be reminded by a message displayed on the
screen every three minutes. The projector will
automatically shut down after 10th minutes if there
has been no further action taken. Re-install the
filters securely, then turn on the power again.
Storing the projector
If you need to store the projector for an extended time, please follow the instructions below.
ꢀ Make sure the temperature and humidity of the storage area are within the recommended
range for the projector. Please refer to the Spec. page in the manual or consult your dealer
about the range.
ꢀ Retract the adjuster feet.
ꢀ Remove the batteries from the remote control.
ꢀ Pack the projector in its original packing or equivalent.
Transporting the projector
It is recommended that you ship the projector with its original packing or equivalent. When
you carry the projector yourself, please use the provided soft carry case.
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Lamp Information
Use and Replacement of the Lamp
When the Lamp Indicator lights up red or a message appears suggesting it is time to replace
the lamp, please install a new lamp or consult your dealer. An old lamp may cause a mal-
function in the projector and in some instances the lamp may explode.
The Lamp indicator light and Temperature warning light will light up if the lamp becomes too
hot. Turn the power off, allow the projector to cool down before checking that the Air Filters
back on, please contact your dealer.
The following Lamp warning displays will remind you of the lamp condition.
Message
Status
The lamp has been in operation for 1980 hours. Install
a new lamp for optimal performance. If the projector is
normally run with Preset "Economic Mode" selected
until the 2980 hour lamp warning appears.
The lamp has been in operation for 2980 hours, the
power will shutdown in 20 hours time. A new lamp
should be fitted to avoid the inconvenience when the
projector runs out of lamp time.
The lamp has been in operation for over 3000 hours.
This message will flash in the center of the screen
together with the Lamp indicator lighting up red for 40
seconds. The projector will shutdown after 40 seconds.
The lamp MUST be replaced before the projector will
operate normally.
Lamp Replacement
To reduce the risk of electrical shock, always turn the projector off and disconnect the power
cord before changing the lamp.
To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before
replacing the lamp.
To reduce the risk of injuries to fingers and damage to internal components, use caution when
removing lamp glass that has shattered into sharp pieces.
38
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
To reduce the risk of injuries to fingers and/or compromising image quality by touching the
lens, do not touch the empty lamp compartment when the lamp is removed.
This lamp contains mercury. Consult your local hazardous waste regulations and dispose of
this lamp in the proper manner.
Step 1. Turn the power off and disconnect the projector from the wall socket.
Step 2. Turn the projector over. Then loosen the
screws and remove the lamp cover. If the
lamp is hot, avoid burns by waiting for 45
minutes until the lamp has cooled.
Step 3. Loosen the screw that fixes the lamp to the
projector. If the screw is not loosened
completely, you could injure your
fingers. It is strongly recommended that
you use a magnetic-head screwdriver.
Step 4. Lift the handle so that it stands up. Use the
handle to slowly pull the lamp out of the
projector.
Pulling too quickly may cause the lamp to break
and scatter broken glass in the projector.
Do not place the lamp in locations where water
might splash on it, children can reach it, or near
flammable materials.
Do not insert your hands into the projector after
the lamp is removed. If you touch the optical com-
ponents inside, it could cause color unevenness and distortion of the projected images.
Step 5. Insert the new lamp. Make sure the handle is fully locked and tighten the screw
firmly.
A Loose screw may cause a bad connection, which could result in malfunction.
Do not over tighten the screw.
Step 6. Re-install the lamp cover and tighten the
screw. Do not turn the power on with the
lamp cover removed. Whenever the lamp
is replaced, reset the total lamp operation
timer. Do not reset if the lamp is not
replaced as this could cause damage.
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Step 7. Reset the lamp counter
i. Press and hold Exit on the projector
for 3 seconds to display the total used
lamp time.
ii. Press Menu on the projector or on
the remote control to access the lamp
hour timer. An adjustment message
will appear.
iii. Press W or X to reset lamp hours
and press EXIT to leave.
Temp Warning Light
When the Temperature warning light is on, it is warning you of the following possible prob-
lems:
1.
2.
3.
The internal temperature is too high.
Air Filters are clogged.
The fans are not working.
Turn the projector off , check that the air filters are clean. If the problem persists, contact
qualified service personnel for further help.
For more detailed information, please refer to the following section.
Indicators
Illustration - table legend.
1.
Blank - : Light OFF
2.
: Light flashing
3.
: Light ON
4.
5.
6.
O : Orange light
R : Red light
G : Green light
40
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
LED
Status & Description
Power Temp Lamp
Power events
The projector has just been connected to a power outlet.
Stand-by mode.
O
O
O
O
-
-
-
-
(1) The projector needs 90 seconds to cool down as it was
abnormally shut down without the normal cooling down
process. Or
O
(2) The projector needs to cool for 90 seconds after the power
is turned off.
The Power indicator light is flashing during powering up.
-
-
-
-
G
G
The projector is under normal operation.
Lamp events
The lamp counter has developed a problem.
-
-
-
-
-
It is warning you that lamp usage has exceeded 3000 hours.
Replace the projection lamp with a new one immediately.
R
R
The lamp is not properly attached or the lamp is damaged.
Please contact your dealer for assistance.
-
-
Thermal events
The projector has shutdown automatically. If you try to re-
start the projector, it will shutdown again. Please contact your
dealer for assistance.
-
-
R
The projector has shutdown automatically. If you try to re-
start the projector, it will shutdown again. Please contact your
dealer for assistance.
-
G
G
R
The projector has shutdown automatically. If you try to re-
start the projector, it will shutdown again. Please contact your
dealer for assistance.
-
R
The projector has shutdown automatically. If you try to re-
start the projector, it will shutdown again. Please contact your
dealer for assistance.
-
G
R
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
41
The projector has shutdown automatically. If you try to re-
start the projector, it will shutdown again. Please contact your
dealer for assistance.
G
G
G
G
R
R
R
R
The projector has shutdown automatically. If you try to re-
start the projector, it will shutdown again. Please contact your
dealer for assistance.
The projector has shutdown automatically. If you try to re-
start the projector, it will shutdown again. Please contact your
dealer for assistance.
-
O
O
The projector has shutdown automatically. If you try to re-
start the projector, it will shutdown again. Please contact your
dealer for assistance.
G
The projector has shutdown automatically. If you try to re-
start the projector, it will shutdown again. Please contact your
dealer for assistance.
G
R
O
R
R
G
The projector has shutdown automatically. If you try to re-
start the projector, it will shutdown again. Please contact your
dealer for assistance.
42
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
Service Information
Accessories (included in the standard package)
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part Number
Power cord (US) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27.01818.000
Power cord (EU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27.82718.281
Power cord (UK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.01018.000
VGA cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J0508.503
RCA Audio/Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.72918.001
S-Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.72920.011
PC audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.L4302.501
Soft carry case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47.J8104.001
Component Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J2401.001
USB mouse cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50.73213.501
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56.26J95.001
3-2 power converter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.91008.001
D-Sub - DVI cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J2103.501
Optional Accessories (not included in the standard package)
Description of parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Partnumber
Mac adapter (switchable) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.20118.A15
300W lamp module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60.J8106.001
250W lamp module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59.J9421.CG1
Ceiling mount kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60.J7683.001
Wireless Pro (EU). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59.J8201.001
Wireless Pro (US). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59.J8201.002
Presentation Pro. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60.J2278.001
DVI-I cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J2508.501
Ordering Parts or Getting Information
For product information, product assistance, service information, or to order accessories,
Maintenance
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Common Problems & Solutions
THE PROJECTOR DOES NOT TURN ON.
Cause
Remedy
Plug the power cord into the AC inlet on the
projector, and plug the power cord into the
power outlet. If the power outlet has a switch,
make sure that it is switched on.
There is no power from the power
cable.
Attempting to turn the projector on
again during the cooling process.
Wait until the cooling down process has
completed.
NO PICTURE
Cause
Remedy
The video source is not turned on or
connected correctly.
Turn the video source on and check that the
signal cable is connected correctly.
The projector is not correctly
connected to the input source device.
Check the connection.
The input signal has not been
correctly selected.
Select the correct input signal with the Source
key on the projector or remote control.
The lens cap is still attached to the
lens.
Remove the lens cap.
BLURRED IMAGE
Cause
Remedy
The projection lens is not correctly
focused.
Adjust the focus of the lens using the focus
ring.
The projector and the screen are not
aligned properly.
Adjust the projection angle and direction as
well as the height of the unit if necessary.
The lens cap is still attached to the
lens
Remove the lens cap.
REMOTE CONTROL DOES NOT WORK
Cause
Remedy
The batteries are out of power.
Replace both of the batteries with new ones.
There is an obstacle between the
remote control and the projector.
Remove the obstacle.
You are too far away from the
projector.
Stand within 6 meters (19.5 feet) of the
projector.
44
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Projector Specifications
Technical Specifications
All specifications are subject to change without notice.
General
Product name
Model name
Digital Projector
PB8240
PB8140
PB8250
1024 x 768 XGA
800 x 600 SVGA
1024 x 768 XGA
Optical
Display system
Lens F/Number
Lamp
1-CHIP DMD
F/2.4
PB8140 / PB8240 250W lamp
PB8250
300W lamp
Electrical
Power supply
AC100 ~ 240V, 4.5A, 50/60 Hz (Automatic)
PB8140 / PB8240 330W (Max)
Power consumption
PB8250
395W (Max)
Mechanical
Dimensions
Weight
320 mm (W) x 106 mm (H) x 236 mm (D)
7.7 lbs (3.5 Kg)
Input terminal
Computer input
RGB input
D-sub 15-pin (female)
DVI-I input
Video signal input
S-VIDEO
Mini DIN 4-pin port x1
VIDEO
RCA jack x1
HDTV signal input
Audio signal input
Audio 1
D-sub <--> YPbPr RCA jack x 3, through RGB input
Mini jack stereo port
Output
USB mouse connector
Speaker
A/B series x 1
1 watt x 2
RGB
Audio L/R
Specifications
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Control
RS-232C
9-pin x1
Environmental Requirements
Operating temperature
0°C ~ 40°C at sea level
Opeating relative humidity 10% ~ 90% (without condensation)
Opeating altitude
6000 feet at 30°C
6000 ~ 10000 feet at 23°C
46
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Timing Chart
Supported timing for PC (including DVI-I) input
Horizontal
Resolution Frequency Frequency Frequency
(kHz) (Hz) (MHz)
Vertical
Pixel
Mode
720 x 400
37.927
85.039
35.500
720 x 400_85
VGA_60
VGA_72
VGA_75
VGA_85
SVGA_60
SVGA_72
SVGA_75
SVGA_85
XGA_60
31.469
37.861
37.500
43.269
37.879
48.077
46.875
53.674
48.363
56.476
60.023
68.667
63.981
59.940
72.809
75.000
85.008
60.317
72.188
75.000
85.061
60.004
70.069
75.029
84.997
60.020
25.175
31.500
31.500
36.000
40.000
50.000
49.500
56.250
65.000
75.000
78.750
94.500
108.000
640 x 480
800 x 600
XGA_70
XGA_75
XGA_85
SXGA3_60
1024 x 768
1280 x 1024
Supported timing for YPbPr input
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Signal Format
480i(525i)@60Hz
480p(525p)@60Hz
576i(625i)@50Hz
576p(625p)@50Hz
720p(750p)@60Hz
720p(750p)@50Hz
1080i(1125i)@60Hz
1080i(1125i)@50Hz
15.73
31.47
15.63
31.25
45.00
37.50
33.75
28.13
59.94
59.94
50.00
50.00
60.00
50.00
60.00
50.00
Supported timing for Video and S-Video inputs
Color Sub-
carrier
Frequency
(MHz)
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Video mode
NTSC
PAL
15.73
15.63
15.63
15.73
15.63
15.73
15.73
60
50
50
60
50
60
60
3.58
4.43
4.25 or 4.41
3.58
SECAM
PAL-M
PAL-N
PAL-60
NTSC4.43
3.58
4.43
4.43
Specifications
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Limited Warranty
BenQ warrants this product against any defects in material and workmanship, under
normal usage and storage.
Proof of purchase date will be required with any warranty claim. In the event this prod-
uct is found to be defective within the warranty period, BenQ’s only obligation and
your exclusive remedy shall be replacement of any defective parts (labor included). To
obtain warranty service, immediately notify the dealer from which you purchased the
product of any defects.
Important: The above warranty shall be void if the customer fails to operate the prod-
uct in accordance with BenQ’s written instructions, especially the ambient humidity
must be in-between 10% and 90%, temperature in-between 0°C and 40°C, altitude lower
than 10000 feet, and avoiding to operate the projector in a dusty environment. This war-
ranty gives you specific legal rights, and you may have other rights which vary from
country to country.
For other information, please refer to BenQ Warranty Information Book.
Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Regulation Statements
FCC Statement
CLASS B: This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—
—
—
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—
Consult the dealer or an experienced radio/TV technician for help.
EEC Statement
This machine was tested against the 89/336/EEC (European Economic Community)
for EMC (Electric Magnetic Compatibility) and fulfills these requirements.
MIC Statement
B class equipment (Household purpose info/telecommunications equipment)
As this equipment has undergone EMC registration for household purpose, this product can
be used in any area including residential area.
50
Regulation Statements
Download from Www.Somanuals.com. All Manuals Search And Download.
|
BenQ Projector SP820 User Manual
Bosch Appliances Home Security System D7412G User Manual
Boss Audio Systems Car Stereo System BV9964B User Manual
Braun Wheelchair NUVL855R User Manual
Briggs Stratton Air Compressor 074008 User Manual
Butler Coffeemaker 645093 User Manual
Campbell Hausfeld Cordless Drill CL154600AV User Manual
Canon Camera Lens 24 105mm User Manual
Chamberlain Garage Door Opener WD962KD User Manual
Chicago Electric Saw 91511 User Manual