FLOURESCENT
MAGNIFYING LAMP
Model 66384
ASSEMbLY ANd OPERATION INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
distributed exclusively by Harbor Freight Tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
©
®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised manual 09a
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Unplug from outlet when not in use
General Safety
and before maintenance or cleaning.
1. CAUTION! TO REdUCE RISK OF
FIRE, USE ONLY CIRCLINE 22-
WATT (or smaller) FLUORESCENT
LAMPS.
3. Do not operate with a damaged cord
or plug or after the Lamp malfunc-
tions or has been damaged in any
manner. Return Lamp to the nearest
authorized service facility for exami-
nation, or repair.
2. The use of any accessory attach-
ments not recommended by the
Lamp manufacturer may cause inju-
ries.
4. This Lamp has a polarized plug (one
blade is wider than the other). To
reduce the risk of electric shock, this
plug is intended to fit into a polarized
outlet only one way. If the plug does
not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician. Do not change
the plug in any way.
3. Do not place under direct sunlight.
4. Do not use Lamp for other than in-
tended use.
5. Maintain labels and nameplates on
the appliance. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
5. Do not use in a damp or wet location.
Power Cord Safety
6. Do not stare at bright light or the sun
through the Lamp’s magnifying lens.
1.
A short power supply cord is to be
provided to reduce risks resulting
from becoming entangled in or trip-
ping over a longer cord.
7. Do not obstruct walkways or common
areas with Lamp or cord.
8. This Lamp is not a toy. Keep it out of
reach of children when children are
not being closely supervised.
2.
3.
Longer extension cords are available
and may be used if care is exercised
in their use.
9. The warnings, precautions, and in-
structions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
If a long extension cord is used,
a. the marked electrical rating of the
(detachable power supply cord or)
extension cord should be at least as
great as the electrical rating of the
Lamp,
b. if the Lamp is of the grounded type,
the extension cord should be a
grounding type 3-wire cord, and
SAVE THESE
INSTRUCTIONS.
c. the longer cord should be arranged
so that it will not drape over the
counter top or tabletop where it can
be pulled on by children or tripped
over.
SKU 66384
For technical questions, please call 1-800-444-3353.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Electrical Requirements
120 V~ / 60 Hz
ABS plastic frame
Glass lens
Material
Power
Switch
3D (Diopter)
= to 1.75 X magnification
Magnification
Bulb Type
22W Circline Fluorescent
Lamp
Cord Length
4’ - 9”
38”
Full Extended Height
Fig. 1
2. Turn on the Lamp by pushing down
on the black rocker Power Switch
(35) found on top of the Lamp behind
the Lens Cover (49). (See Fig. 1.)
UNPACKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
Lens
Lens Frame
(34)
Cover
(49)
OPERATION
Read the ENTIRE IMPORTANT
SAFEGUARdS section at the
beginning of this manual
including all text under
5" Lens (43)
subheadings therein before set
up or use of this Lamp.
1. Although this Power Cord (12) is sup-
plied with a two-prong polarized plug,
it can be plugged into any 120V two
or three prong outlet.
Fig. 2
3. To use the Magnifying Lamp, pull
open the Lens Cover (49) from the
Lens Frame (34). (See Fig. 2.)
4. Use the Adjusting Knob (31) to set
the desired angle.
5. After each use, shut the Lens Cover
(49) and remove the Power Cord (12)
from the outlet.
6. Store Lamp in a safe location out of
the reach of children.
REV 09e
SKU 66384
For technical questions, please call 1-800-444-3353.
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
REPLACING THE bULb
22W Circline
bulb (46)
When replacing the Lamp bulb
(46), be sure to wear ANSI-
approved safety goggles. Also,
keep track of the eight Screws
(48) during replacement. The
Screws are very small and can
be swallowed by young
bulb Clip (47)
children.
1. To replace the 22W Circuline Bulb
(46), turn off the Lamp and unplug
the Power Cord (12) from the outlet.
Fig. 4
5. Remove the Bulb Clips (47) by un-
screwing the screws holding the clips
with a #1 Phillips screwdriver. (See
Fig. 4.)
2. Lay the Lamp down and loosen the
Adjusting Knob (31) so that the Lamp
rests flat on the work surface with the
Bulb facing up.
bulb Socket (44)
Screws
bulb (46)
bulb Prongs
Clear
Cover (45)
Fig. 5
Screws
Fig. 3 / Lamp Head Assembly
6. Pull the Circline Bulb (46) prongs out
of the square Bulb Socket (44). (See
Fig. 5.)
3. Use a #1 Phillips screwdriver (not
included) to remove the five Screws
(48) from the Clear Cover (45). (See
Fig. 3.)
7. Dispose of old Bulb properly and
install a new 22W Circline Bulb
by aligning the Bulb Prongs to the
Lamp Socket openings and push the
prongs securely into the socket.
4. Lift the Clear Cover (45) away from
the Lens Frame (34). Please note:
The Bulb Clips also hold the 5" Lens
in place, so when removed, the Lens
is loose and could fall out if the lamp
head is turned over.
SKU 66384
For technical questions, please call 1-800-444-3353.
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSPECTION ANd
MAINTENANCE
TO PREVENT
SERIOUS INjURY
FROM ACCIdENTAL
WARNING
Circline bulb (46)
bulb
Socket (44)
OPERATION OR ELECTRIC
SHOCK:
before appliance inspection
or maintenance, make sure
the Power Switch (12) is
turned off, the cord is
unplugged, and the bulb has
cooled.
Lens Frame (34)
Fig. 6.)
8. Fasten the Bulb Support Latch back
into place. (See Fig. 6.)
TO PREVENT SERIOUS
INjURY FROM APPLIANCE
FAILURE:
9. Lower the Bulb into place in the Lens
Frame (34).
do not use damaged Lamp.
Have the problem corrected
before further use.
10. Re-attach the three Bulb Clips (47)
and screws securing the Bulb back in
the Lens Frame.
1. bEFORE EACH USE, inspect the
general condition of the Magnifying
Lamp. Check for loose screws, mis-
alignment or binding of moving parts,
cracked or broken parts, damaged
electrical wiring, and any other condi-
tion that may affect its safe operation.
11. Place the Clear Cover (45) back onto
the Lens Frame and align the screw
holes.
12. Fasten the Clear Cover back onto
the Lens Frame using the five screws
removed earlier. Do not overtighten.
2. Wipe off lamp with a soft, moist cloth
regularly to prevent dust accumula-
tion.
13. Once all connections are secure, set
the Magnifying Lamp upright and on
its base. Adjust the tilt/angle of the
Lamp head and tighten the adjusting
knob.
PLEASE REAd THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy DIAGRAM IN
THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy
REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS
TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN By CERTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUyER. THE BUyER ASSUMES ALL
RISK AND LIABILITy ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 66384
For technical questions, please call 1-800-444-3353.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST ANd ASSEMbLY dIAGRAM
20
21
23
24
25
26 27
28
29
30 31
22
49
19
32
18
17
16
33
34
35
36
12
15
37
38
39
14
13
40
41
42
11
10
9
45
46
48
44
47
43
8
7
Part description
Part description
1
Handle
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
Bolt
6
2
Screw
Upper Pressure Strip
Left Pressure Strip
Right Pressure Strip
Electric Gasket
Adjusting Knob
Connector
5
3
Metal Bracket
Fixing Plate
Clip
4
5
6
Down Pressure Strip
Washer
4
3
7
8
Rivet Joint Screw
Elastomeric Gasket
Lens Frame
Power Switch
Strain Relief
Electric Ballast
Space Washer
Under Cover
Locknut
2
1
9
No. 1 Wire Protective Casing
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
No. 3 Wire Protective Casing
Arm 3
Power Cord
Bolt
Pressure Spring
Arm 4
Spring Seat
Wire Sleeve
Bolt
Mandril
Tension Spring
Upper Arm Tension Bracket
Center Pressure Strip
Pin
5" Lens
Bulb Socket
Clear Cover
22W Circline Bulb
Bulb Clip
No. 2 Wire Protective Casing
Arm 1
Screws - 8
Arm 2
Lens Cover
Washer
SKU 66384
For technical questions, please call 1-800-444-3353.
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITEd 90 dAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet high
quality and durability standards, and warrants to the original purchaser that this prod-
uct is free from defects in materials and workmanship for the period of 90 days from
the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities,
criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental,
contingent, special or consequential damages arising from the use of our product. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation of exclusion may not apply to you. THIS WARRANTy IS ExPRESS-
Ly IN LIEU OF ALL OTHER WARRANTIES, ExPRESS OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITy AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of the com-
plaint must accompany the merchandise. If our inspection verifies the defect, we will ei-
ther repair or replace the product at our election or we may elect to refund the purchase
price if we cannot readily and quickly provide you with a replacement. We will return re-
paired products at our expense, but if we determine there is no defect, or that the defect
resulted from causes not within the scope of our warranty, then you must bear the cost
of returning the product.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not avail-
able individually as replacement parts.
SKU 66384
For technical questions, please call 1-800-444-3353.
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
|