User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1. BEFORE OU BEGIN
Y
What is included
•
•
•
•
•
1 x Intimidator™ Scan LED 300
1 x Mounting bracket kit
1 x Power Cord
1 x Warranty Card
1 x User Manual
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure
that all parts are present, and have been received in good condition. Notify the shipper
immediately and retain packing material for inspection if any parts appear damaged from
shipping or the carton itself shows signs of mishandling. Save the carton and all packing
materials. In the event that a fixture must be returned to the factory, it is important that the fixture
be returned in the original factory box and packing.
Manual Conventions
CHAUVET® manuals use the following conventions to differentiate certain types of information
from the regular text.
MEANING
CONVENTION
[10]
<Menu>
1~512
50/60
A DIP switch to be configured
A key to be pressed on the fixture’s control panel
A range of values
A set of values of which only one can be chosen
A menu option not to be modified (for example, showing the operating
mode/current status)
Settings
MENU >
Settings
A sequence of menu options to be followed
A value to be entered or selected
ON
Icons
This manual uses the following icons to indicate information that requires special attention on the
part of the user.
MEANING
ICONS
This paragraph contains critical installation, configuration or operation
information. Failure to comply with this information may render the fixture
partially or completely inoperative, cause damage to the fixture or cause
harm to the user.
This paragraph contains important installation or configuration information.
Failure to comply with this information may prevent the fixture from
functioning correctly.
This paragraph reminds you of useful, although not critical, information.
1. Before You Begin
3
10/25/2010 10:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Please read these instructions carefully. It includes important information
about the installation, usage and maintenance of this product.
•
•
Please keep this User Manual for future consultation. If you sell the unit to another
user, be sure that they also receive this instruction booklet.
Always make sure that you are connecting to the proper voltage, and that the line
voltage you are connecting to is not higher than that stated on the decal or rear panel
of the fixture.
•
This product is intended for indoor use only! To prevent risk of fire or shock, do not
expose fixture to rain or moisture.
•
•
Make sure there are no flammable materials close to the unit while operating.
The unit must be installed in a location with adequate ventilation, at least 20 in (50 cm)
from adjacent surfaces. Be sure that no ventilation slots are blocked.
•
Always disconnect from power source before servicing or replacing fuse and be sure to
replace with same fuse source.
•
•
Secure fixture to fastening device using a safety chain.
Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at
temperatures higher than this.
•
In the event of a serious operating problem, stop using the unit immediately. Never try
to repair the unit by yourself. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
•
•
•
•
Never connect the device to a dimmer pack.
Make sure the power cord is never crimped or damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Never carry the fixture directly from the cord. Always use the hanging/mounting
bracket.
•
Avoid direct eye exposure to the light source while it is on.
1. Before You Begin
4
10/25/2010 10:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
2. INTRODUCTION
Product Dimensions
2. Introduction
5
10/25/2010 10:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
Safety
Bracket Adjustment
Knob
Voltage Selection
Switch (115/230 VAC)
DMX In
Power In
DMX Out
Power Out
Fuseholder
2. Introduction
6
10/25/2010 10:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
3. SETUP
AC Power
This fixture is switchable and runs on either 115 VAC, 60 Hz or 230 VAC, 50 Hz power. Before
powering on the unit, make sure the line voltage to which you are connecting it matches the
current setting on the voltage selection switch.
To determine the power requirements for a particular fixture, see the label affixed to the back
plate of the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating
indicates its average current draw under normal conditions.
Always connect the fixture to a switched circuit. Never connect the fixture to a rheostat
sistor) or dimmer circuit, even if the rheostat or dimmer channel is used only
0% switch.
nect the fixture to a circuit with a suitable electrical ground.
Po
contains power linking via the Edison outlet located in front of the power input cable.
he diagram below for further explanation.
um quantity of Intimidator™ Scan LED 300 that may be linked is 4.
Additional power
link out
linking shown in this document is for the CHAUVET® North American version
refore, it is the customer’s responsibility to check with the Dealer/Distributor
ower linking on the local version of the product. Connections and availability
e, depending on the power requirements and/or regulations of each
country/region.
3. Setup
7
10/25/2010 10:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting
Orientation
The Intimidator™ Scan LED 300may be mounted in any position provided there is adequate
room for ventilation.
Rigging
Be sure that the structure can support the weight of the fixture. Please see the “Technical
Specifications” section of this manual for a detailed weight listing. Mount the fixture securely. This
may be done with a screw, nut and bolt, or a hanging clamp. The hole in each bracket is 13 mm
in size. When rigging, consider routine maintenance and control panel access. Please see the
following notes on installation.
•
•
•
If the power link out is intended to be used with multiple fixture, take into account the
length of each power cable, and mount the fixtures close enough to one another to
accommodate for this.
When aiming the fixtures, you may use the bracket/yoke adjustment knob(s). Loosen
the knob(s), adjust to the desired angle, and then tighten the knob(s) by turning
clockwise. Do not use tools for this step, as it may cause damage.
Safety cables must always be used.
Hanging Bracket
Bracket Adjustment
Knob
Bracket Adjustment
Knob
Rubber Feet
(1 of 4)
duct. If using the hanging bracket,
e product. If using the 2 rubber feet,
removed is you desire.
3. Setup
8
10/25/2010 10:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
4. OPERATING INSTRUCTIONS
Using the Control Panel
Access control panel functions using the four buttons located directly underneath the LED display on
the included wired remote.
BUTTON
FUNCTION
Used to scroll through the current
operating mode, as well as back
out of the current menu option
<MODE
ESC>
Used to select decreasing
advancement in the value
<DOWN>
<UP>
Used to select increasing
advancement in the value
Used to select a value and store
it to memory
<ENTER>
Use the control panel to select the operating mode, as well as the sub-features. For a detailed layout of
the control panel functions, please see the “menu map” section on the previous page.
Menu Map
MENU
SELECTION 1
SELECTION 2
DESCRIPTION
DMX Address
DMX starting address
Standalone: Slave receive mode
Standalone: sound-active
Standalone: fast
Standalone: slow
No function
d001~512
SLAv
Ns ts
NAFA
NASL
PAN
rPAN
tit
Rtit
Dis
RdiS
8CH
11CH
Son
SrUn
FASt
SLoU
Standalone Mode
Pan Invert
Tilt Invert
Pan invert
No function
Tilt invert
No function
Display Invert
Personality
Invert the display
8-channel personality
11-channel personality
Reset all motors to correct any errors with
motors misaligning during operation
Reset
rESt
Load Default
Revert all settings back to the factory default
LoAd
Configuring the Starting Address
The Intimidator™ Scan LED 300 fixture uses up to 11 DMX channels. In this DMX
configuration/personality, the highest channel that the fixture may be set to in order to function properly
is 502. Any address higher than this will prevent access to all of the channels, while in this mode;
however, if you desire to use one of the other DMX channels configurations (personalities), please
consider the total DMX channels when selecting a DMX address.
The Intimidator™ Scan LED 300 fixture uses 8 or 11 DMX channels, depending on the selected DMX
configuration (personality). If this is your first time using DMX, we recommend reading the “DMX
Primer” section in the “Appendix”.
4. Operating Instructions
9
10/25/2010 10:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
DMX Operation
This is the operating mode which will allow for control with an external DMX controller. You must
set the starting address for this mode. If this is your first time using DMX, then it is recommended
that you refer to the “DMX Primer” section in the “Appendix” of this manual.
1. Press <MODE/ESC> until d*** appears on the LED screen.
2. Using <UP> and <DOWN>, select the starting address (001~512).
3. Press < ENTER > until one of the DMX personalities appears on the LED screen (8-
CH, 11-CH).
4. Using <UP> and <DOWN>, select the desired DMX personality.
5. Press <ENTER>.
Only connect 32 fixtures to a single DMX daisy chain!
Master/Slave Mode (Sound-Active, Auto Mode)
This mode allows a single unit, the master, to operate in one of the standalone modes, while one
or more fixtures, slaves, synchronize their responses to the master.
Master:
The master fixture may be set in any of the STANDALONE modes: sound-active, fast, or
slow.
Slave:
1. Press <MENU> until SLAu appears on the LED screen.
2. Press < ENTER >.
Only connect 31 slave fixtures when operating in this mode!
Automatic-Slow
This fixture has a preprogrammed chase that will operate in a preprogrammed, slow playback
speed.
Access this mode via the control panel on the front of the fixture. Please see the instructions
below for further explanation.
1. Press <MODE/ESC> until one of the standalone modes appears on the LED screen
(SLAv, NStS, NAFA, NASL).
2. Using <UP> and <DOWN>, select NASL.
3. Press <ENTER>.
Automatic-Fast
This fixture has a preprogrammed chase that will operate in a preprogrammed, fast playback
speed.
Access this mode via the control panel on the front of the fixture. Please see the instructions
below for further explanation.
1. Press <MODE/ESC> until one of the standalone modes appears on the LED screen
(SLAv, NStS, NAFA, NASL).
2. Using <UP> and <DOWN>, select NAFA
.
3. Press <ENTER>.
4. Operating Instructions
10
Download from Www.Somanuals.com. All Manuals Search And Download.
10/25/2010 10:23 AM
Sound-Active
This fixture has a preprogrammed, sound triggered chase.
Access this via the control panel on the front of the fixture. Adjust the microphone sensitivity from
the control panel. Please see the chart below for further explanation.
1. Press <MODE/ESC> until one of the standalone modes appears on the LED screen
(SLAv, NStS, NAFA, NASL).
2. Using <UP> and <DOWN>, select NStS.
3. Press <ENTER>.
The microphone will only respond to low frequencies (bass).
Service Mode
Hidden Menu Map
This fixture has a hidden menu. The purpose of this menu is to adjust the home position
(electronic adjustment) of the attributes listed below.
MAIN
FUNCTION
P128
t128
G128
r128
SELECTION
INSTRUCTION
Adjustment for pan
000
000
000
000
000
000
~
~
~
~
~
~
255
255
255
255
255
255
Adjustment for tilt
Adjustment for the gobo wheel
Adjustment for the gobo wheel rotation
Adjustment for the color wheel
Adjustment for the focus
C128
F128
Please see the instructions below to access this hidden menu:
1. Press < MODE/ESC > for at least 10 seconds.
2. Using <UP/DOWN>, enter the following pass code: “2323”. Press <UP> to change the
blinking digit in ascending order, and press <DOWN> to move on to the next digit.
3. Press <ENTER>.
This mode will be automatically terminated after 10 seconds of being idol.
4. Operating Instructions
11
10/25/2010 10:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DMX Channel Values
11-CH Mode
CHANNEL
VALUE
FUNCTION
CHANNEL
VALUE
FUNCTION
Pan
Gobo Rotation
000 Ù 015 Stop
1
000 Ù 255 0°~180°
7
016 Ù 127 Rotate Counter-clockwise (slow Ù fast)
128 Ù 239 Rotate Clockwise (slow Ù fast)
240 Ù 255 Gobo bounce
Tilt
2
000 Ù 255 0°~90°
Color
Prism
000 Ù 006 Open (white)
007 Ù 013 Yellow
014 Ù 020 Pink
021 Ù 027 Green
8
9
000 Ù 003 Open
004 Ù 255 Stop, static prism effect
Focus
0 Ù 255 Near Ù Far
028 Ù 034 Peachblow
035 Ù 041 Blue
042 Ù 048 Kelly
049 Ù 055 Red
056 Ù 063 Dark blue
Function
000 Ù 007 No function
008 Ù 015 Pan/tilt move-in-black
016 Ù 023 Pan/tilt move-in-black (disable)
024 Ù 031 Color wheel move-in-black
032 Ù 039 Color wheel move-in-black (disabled)
040 Ù 047 Gobo wheel move-in-black
048 Ù 055 Gobo wheel move-in-black (disabled)
056 Ù 087 No Function
088 Ù 095 All movement move-in-black (disabled)
096 Ù 103 Reset pan/tilt
104 Ù 111 No Function
3
064 Ù 070 White/yellow (split colors)
071 Ù 077 Yellow/pink (split colors)
078 Ù 084 Pink/green (split colors)
085 Ù 091 Green/peach blow (split colors)
092 Ù 098 Peachblow/blue (split colors)
099 Ù 105 Blue/Kelly (split colors)
106 Ù 112 Kelly/red (split colors)
113 Ù 119 Red/dark blue (split colors)
120 Ù 127 Dark blue/white (split colors)
128 Ù 191 Rotate clockwise (slow ~ fast)
192 Ù 255 Rotate counter-clockwise (slow ~ fast)
10
112 Ù 119 Reset color wheel
120 Ù 127 Reset gobo wheel
128 Ù 135 No Function
136 Ù 143 Reset prism
144 Ù 151 Reset focus
152 Ù 159 Reset all
160 Ù 255 No function
Shutter
000 Ù 003 Closed
004 Ù 007 Open
008 Ù 215 Strobe (slow ~ fast)
216 Ù 255 Open
4
5
Movement Macros
000 Ù 007 No function
008 Ù 023 Automatic 1
024 Ù 039 Automatic 2
040 Ù 055 Automatic 3
056 Ù 071 Automatic 4
072 Ù 087 Automatic 5
088 Ù 103 Automatic 6
104 Ù 119 Automatic 7
120 Ù 135 Automatic 8
136 Ù 151 Sound 1
152 Ù 167 Sound 2
168 Ù 183 Sound 3
184 Ù 199 Sound 4
200 Ù 215 Sound 5
216 Ù 231 Sound 6
232 Ù 247 Sound 7
248 Ù 255 Sound 8
Dimmer
000 Ù 255 Dimmer: 0%~100%
Gobo Wheel
000 Ù 007 Open
008 Ù 015 Gobo 1 (glass)
016 Ù 023 Gobo 2 (glass)
024 Ù 031 Gobo 3
032 Ù 039 Gobo 4
040 Ù 047 Gobo 5
048 Ù 055 Gobo 6
056 Ù 063 Gobo 7
11
6
064 Ù 071 Gobo 7 shake, fast to slow
072 Ù 079 Gobo 6 shake, fast to slow
080 Ù 087 Gobo 5 shake, fast to slow
088 Ù 095 Gobo 4 shake, fast to slow
096 Ù 103 Gobo 3 shake, fast to slow
104 Ù 111 Gobo 2 (glass) shake, (fast Ù slow)
112 Ù 119 Gobo 1 (glass) shake, (fast Ù slow)
120 Ù 127 Open
128 Ù 191 Gobo scroll: Clockwise rotation
192 Ù 255 Gobo scroll: Counter-clockwise rotation
4. Operating Instructions
12
Download from Www.Somanuals.com. All Manuals Search And Download.
10/25/2010 10:23 AM
7-CH Mode
CHANNEL
VALUE
FUNCTION
CHANNEL
6
VALUE
FUNCTION
Pan
Gobo Rotation
1
000 Ù 255 0°~180°
000 Ù 015 Stop
016 Ù 127 Rotate Counter-clockwise (slow Ù fast)
128 Ù 239 Rotate Clockwise (slow Ù fast)
240 Ù 255 Gobo bounce
Tilt
2
000 Ù 255 0°~90°
Color
000 Ù 006 Open (white)
007 Ù 013 Yellow
014 Ù 020 Pink
021 Ù 027 Green
028 Ù 034 Peachblow
035 Ù 041 Blue
042 Ù 048 Kelly
049 Ù 055 Red
056 Ù 063 Dark blue
Prism
000 Ù 003 Open
004 Ù 255 Stop, static prism effect
7
8
Focus
0 Ù 255 Near Ù Far
3
064 Ù 070 White/yellow (split colors)
071 Ù 077 Yellow/pink (split colors)
078 Ù 084 Pink/green (split colors)
085 Ù 091 Green/peach blow (split colors)
092 Ù 098 Peachblow/blue (split colors)
099 Ù 105 Blue/Kelly (split colors)
106 Ù 112 Kelly/red (split colors)
113 Ù 119 Red/dark blue (split colors)
120 Ù 127 Dark blue/white (split colors)
128 Ù 191 Rotate clockwise (slow ~ fast)
192 Ù 255 Rotate counter-clockwise (slow ~ fast)
Shutter
000 Ù 003 Closed
004 Ù 007 Open
4
008 Ù 215 Strobe (slow ~ fast)
216 Ù 255 Open
Gobo Wheel
000 Ù 007 Open
008 Ù 015 Gobo 1 (glass)
016 Ù 023 Gobo 2 (glass)
024 Ù 031 Gobo 3
032 Ù 039 Gobo 4
040 Ù 047 Gobo 5
048 Ù 055 Gobo 6
056 Ù 063 Gobo 7
5
064 Ù 071 Gobo 7 shake, fast to slow
072 Ù 079 Gobo 6 shake, fast to slow
080 Ù 087 Gobo 5 shake, fast to slow
088 Ù 095 Gobo 4 shake, fast to slow
096 Ù 103 Gobo 3 shake, fast to slow
104 Ù 111 Gobo 2 (glass) shake, (fast Ù slow)
112 Ù 119 Gobo 1 (glass) shake, (fast Ù slow)
120 Ù 127 Open
128 Ù 191 Gobo scroll: Clockwise rotation
192 Ù 255 Gobo scroll: Counter-clockwise rotation
4. Operating Instructions
13
Download from Www.Somanuals.com. All Manuals Search And Download.
10/25/2010 10:23 AM
5. APPENDIX
General Troubleshooting
SYMPTOM
POSSIBLE CAUSE(S
)
POSSIBLE ACTION(S)
• Check total load placed on the
electrical circuit.
• Excessive circuit load
Breaker/Fuse
keeps blowing
• Short circuit along the power
wires
• Check for a short in the electrical
wiring (internal and/or external).
• No power
• Loose power cord
• Check for power on Mains.
• Check power cord
Device does not
power up
• Check Control Panel and unit
addressing
• Wrong DMX addressing
• Damaged DMX cables
• Wrong polarity settings on the
controller
• Check DMX cables
• Check polarity switch settings on
the controller
Fixture is not
responding to DMX
• Loose DMX cables
• Faulty DMX interface
• Faulty Main PCB
• Check cable connections
• Replace DMX input
• Replace Main PCB
• Non DMX cables
• Bouncing signals
• Use only DMX compatible cables
• Install terminator as suggested.
• Install amplifier right after fixture
with strong signal.
• Install an optically coupled DMX
splitter after unit #32.
• Long cable / Low level signal
• Too many fixtures
Loss of signal
• Keep DMX cables separated from
power cables or black lights.
• Interference from AC wires
If you still have a problem after trying the above solutions, please contact CHAUVET®
Technical Support.
5. Appendix
14
10/25/2010 10:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DMX Primer
There are 512 channels in a DMX connection. A fixture capable of receiving DMX will require one
or a number of sequential channels. The user must assign a starting address on the fixture that
indicates the first channel reserved in the controller. There are many different types of DMX
controllable fixtures and they all may vary in the total number of channels required. Choosing a
start address should be planned in advance. Channels should never overlap. If they do, this will
result in erratic operation of the fixtures whose starting address is set incorrectly. You can
however, control multiple fixtures of the same type using the same starting address as long as the
intended result is that of unison movement or operation. In other words, the fixtures will all
respond exactly the same.
DMX fixtures are designed to receive data through a daisy chain. A daisy chain connection is
where the DATA OUT of one fixture connects to the DATA IN of the next fixture. The order in
which the fixtures are connected is not important and has no effect on how a controller
communicates to each fixture. Use an order that provides for the easiest and most direct cabling.
Connect fixtures using shielded two conductor twisted pair DMX data cable with three pin XLR
male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-) and
pin 3 is Data positive (S+).
Fixture Linking (Daisy Chain)
You will need a daisy chain to run light shows of one or more fixtures using a DMX controller or to
run synchronized shows on two or more fixtures set to a master/slave operating mode. The
combined number of channels required by all the fixtures on a daisy chain determines the number
of fixtures the data link can support.
To comply with the EIA-485 standard, do not connect more than 32 fixtures on one daisy
chain. Connecting more than 32 fixtures on one daisy chain without the use of a DMX
optically-isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended cable distance: 500 m (1640 ft)
Maximum recommended number of fixtures on a daisy chain: 32
Data Cabling
To link fixtures together you must obtain data cables. You can purchase CHAUVET® certified
DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create
your own cable please use data-grade cables that can carry a high quality signal and are less
prone to electromagnetic interference.
DMX Data Cable
Use a Belden© 9841 or equivalent cable which meets the specifications for EIA RS-485
applications. Standard microphone cables cannot transmit DMX data reliably over long distances.
The cable must have the following characteristics:
Type:
shielded, 2-conductor twisted pair
30 pF/ft
Maximum capacitance between conductors:
Maximum capacitance between conductor and shield:
Maximum resistance:
Nominal impedance:
55 pF/ft
20 ohms/1000 ft
100 ~ 140 ohms
5. Appendix
15
10/25/2010 10:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable Connectors
Cabling must have a male XLR connector on one end and a female XLR
connector on the other end.
DMX connector configuration
COMMON
DMX +
1
3
1
3
INPUT
OUTPUT
2
2
DMX
-
Terminator
To avoid signal transmission problems
and interference, it is always advisable to
connect a DMX signal terminator.
1
3
2
120 ohm ¼ W resistor
between pin 2 (DMX -) and
pin 3 (DMX +) on the
output of the last fixture
Do not allow contact between the common and the fixture’s chassis ground. Grounding
the common can cause a ground loop, and your fixture may perform erratically. Test
cables with an ohm meter to verify correct polarity and to make sure the pins are not
grounded or shorted to the shield or each other.
Setting the Starting Address
This DMX mode enables the use of a universal DMX controller device. Each fixture requires a
start address from 1~512. A fixture requiring one or more channels for control begins to read the
data on the channel indicated by the start address. For example, a fixture that uses six DMX
channels and was addressed to start on DMX channel 100, would read data from channels: 100,
101, 102, 103, 104, and 105. Choose start addresses so that the channels used do not overlap,
and note the start address selected for future reference.
If this is your first time addressing a fixture using the DMX control protocol, we suggest jumping
to the “Appendix” section and reading the heading “DMX Primer”. It contains very useful
information that will help you understand its use.
5. Appendix
16
10/25/2010 10:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
3-Pin to 5-Pin Conversion Chart
If you use a controller with a 5-pin DMX output connector, you will need to use a 5-pin to
3-pin adapter. The chart below details a proper cable conversion:
3-PIN TO 5-PIN CONVERSION CHART
Conductor
3-Pin Female (Output)
Pin 1
5-Pin Male (Input)
Pin 1
Ground/Shield
Data ( - ) signal
Data ( + ) signal
Not used
Pin 2
Pin 3
Pin 2
Pin 3
Pin 4
Pin 5
Not used
Setting up a DMX Daisy Chain
1. Connect the (male) 3-pin connector side of
the DMX cable to the output (female) 3-pin
connector of the controller.
Universal DMX Controller
2. Connect the end of the cable coming from the
controller which will have a (female) 3-pin
connector to the input connector of the next
fixture consisting of a (male) 3-pin connector.
This drawing
3. Then, proceed to connect from the output as
stated above to the input of the following
fixture and so on.
provides a general
illustration of the
DMX input/output
panel of a lighting
fixture.
Continue the link
5. Appendix
17
10/25/2010 10:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
General Maintenance
To maintain optimum performance and minimize wear, fixtures should be cleaned frequently.
Usage and environment are contributing factors in determining frequency. As a general rule,
fixtures should be cleaned at least twice a month. Dust build up reduces light output performance
and can cause overheating. This can lead to reduced lamp life and increased mechanical wear.
Be sure to power off fixture before conducting maintenance.
•
•
Unplug fixture from power.
Use a vacuum or air compressor and a soft brush to remove dust collected on external
vents.
•
Clean all lenses when the fixture is cool with a mild solution of glass cleaner or
Isopropyl Alcohol and a soft lint free cotton cloth or lens tissue.
•
•
Apply solution to the cloth or tissue and drag dirt and grime to the outside of the lens.
Gently polish optical surfaces until they are free of haze and lint.
The cleaning of external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the fixture operates.
Damp, smoky or particularly dirty surroundings can cause greater accumulation of dirt on the
unit’s optics. Clean with soft cloth using normal glass cleaning fluid. Clean the external optics at
least every 20 days. Clean the fixture at least every 30/60 days.
Always dry the parts carefully after cleaning them.
Never spin a fan using compressed air.
Returns Procedure
Returned merchandise must be sent prepaid and in the original packing; call tags will not be
issued. Package must be clearly labeled with a Return Merchandize Authorization Number (RMA
#). Products returned without the RMA # will be refused. Call CHAUVET® and request an RMA #
prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief
description of the cause for the return. Be sure to pack fixture properly; any shipping damage
resulting from inadequate packaging is the customer’s responsibility. As a suggestion, proper
UPS packing or double-boxing is always a safe method to use. CHAUVET® reserves the right to
use its own discretion to repair or replace product(s).
If you are given an RMA #, please include the following information on a piece of paper
inside the box:
1)
2)
3)
4)
5)
Your name
Your address
Your phone number
The RMA #
A brief description of the symptoms
Claims
Damage incurred in shipping is the responsibility of the shipper; therefore, the damage must be
reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify
and submit claims with the shipper in the event that a fixture is damaged due to shipping. Any
other claim for items such as missing component/part, damage not related to shipping, and
concealed damage, must be made within seven (7) days of receiving merchandise.
5. Appendix
18
10/25/2010 10:23 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
WEIGHT & DIMENSIONS
Length..............................................................................................................11 in (279 mm)
Width................................................................................................................10 in (254 mm)
Height............................................................................................................18.9 in (478 mm)
Weight............................................................................................................ 14.7 lbs (6.7 kg)
GOBO SIZE
Outside.......................................................................................................................23.8 mm
Inside .........................................................................................................................20.9 mm
Thickness (max)..............................................................................................................2 mm
MOVEMENT RANGE
Pan....................................................................................................................................180°
Tilt .......................................................................................................................................90°
POWER
Switchable.......................................................................................... 115/230 VAC, 50/60 Hz
Power consumption @ 120 V ...............................................149 W (2.1 A) max, 0.2 A inrush
Power consumption @ 230 V ...............................................149 W (1.1 A) max, 0.2 A inrush
Power output..........................................................................................................4 units max
LIGHT SOURCE
Type........................................................................................high-power, single source LED
Quantity...................................................................................................................... 1 (white)
Rating (red, green, blue).................................................................(60 W) 14.9 A, 50,000 hrs
PHOTO OPTIC
Lux ...................................................................................................................... 9.650 @ 1 m
Beam angle.........................................................................................................................21°
INDOOR/OUTDOOR
Rating........................................................................................................ For indoor use only
THERMAL
Maximum ambient temperature........................................................................104° F (40° C)
CONTROL & PROGRAMMING
Data input.................................................................................locking 3-pin XLR male socket
Data output ...........................................................................locking 3-pin XLR female socket
Data pin configuration...............................................................pin 1 shield, pin 2 (-), pin 3 (+)
Protocols........................................................................................................DMX-512 USITT
DMX Channels (user-configurable) .............................................................................. 8 or 11
ORDERING INFORMATION
Intimidator™ Scan LED 300 ......................................................INTIMIDATORSCANLED300
WARRANTY INFORMATION
Warranty ..............................................................................................2-year limited warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTACT US
World Wide
General Information
CHAUVET®
5200 NW 108th Ave
Sunrise, FL 33351
voice: 954.929.1115
fax:
954.929.5560
toll free: 800.762.1084
Technical Support
World Wide Web
CHAUVET®
5200 NW 108th Ave
Sunrise, FL 33351
voice: 954.929.1115 (Press 4)
fax:
954.929.5560 (Attention: Service)
Download from Www.Somanuals.com. All Manuals Search And Download.
|