Download from Www.Somanuals.com. All Manuals Search And Download.
1. Buttons
MENU button
RESTART button
START/STOP
button
(ENTER)
1Screen
2
3
4
5
6
7
Battery life indicator
REV
FWD
Selected tire icon
Auto mode icon
Speed scale icon
Pacer
MODE button (SELECT)
See how the four buttons work in the various modes.
Selected function icon
START/STOP button (ENTER)
Normally this button starts and stops timer that effects the other functions like average speed,
etc. When measuring, the speed scale icon flashes.
While setting up the unit this button enters and completes each selection.
MODE button (SELECT: FWD/REV)
Normally this button switches the function of the lower display. In the setting mode this
button forwards and reverses among options. The right button is FWD (forward) and the left
button is REV (reverse).
MENU button
This button is used to review past data or to change settings.
RESTART button
This button is used only after replacing the battery or when screen freezes or appears erratic.
Reset operation (Resetting the screen data)
Press START/STOP/ENTER button and either of MODE/SELECT but-
Press simultaneously
ton simultaneously to reset daily ride data of Trip Distance, Average
Speed and Elapsed Time. Total Distance (Odo) and Clock Time are
not effected.
Download from Www.Somanuals.com. All Manuals Search And Download.
OS 1.0
3
2. Functions
Current Speed
Current Speed always displays in the upper display. The data is updated
once a second. When the font size is 100%, Current Speed appears be-
tween Clock Time and Elapsed Time and is indicated by the flashing Spd
icon. 0.0(3.0)-65.9 mph [0.0(4.0)-105.9 km/h]
Elapsed Time
This is the ride time from the start to the present and shown in hours, min-
utes and seconds. Performing a reset operation returns the data to zero.
After 9.59.59 the timer will continue counting from 0.00.00. 0.00.00 - 9.59.59
Trip Distance
The trip distance from the start to the present time is displayed. Performing
a reset operation returns the data to zero. 0.00 - 99999.99 mile [km]
Average Speed
The average speed from the start to the present time is displayed. Performing
a reset operation returns the data to zero. When the trip distance exceeds
99999.99km or the elapsed time exceeds 99:59'59", [ERROR] will appear on
the display and calculation of Average Speed will no longer compute.
0.0 - 65.9 mph [0.0 - 105.9 km/h]
Maximum Speed
The maximum instantaneous speed from the start to the present time is dis-
played. Performing a reset operation returns the data to zero. Maximum
speed is calculated regardless if the ride timer is on.
0.0(3.0)-65.9 mph [0.0(4.0)-105.9 km/h]
Total Distance
The odometer distance is accumulated continuously. It is not effected by
performing a reset operation. Odometer distance is calculated regardless if
the ride timer is on. 0.0 - 999999.9 mile [km]
Clock Time
Time is displayed in 12h or 24h mode.
* The font size of the sample screens in this page is 70:30.
Download from Www.Somanuals.com. All Manuals Search And Download.
OS 1.0
4
Pace arrow
The pace arrow indicates if the current speed is faster or slower than the
average speed. If the current speed is equal to the average speed, both
arrows appear.
Eco mode (Sleep mode)
When the main unit is left without receiving any signal for about five min-
utes, the display goes blank. When any main button is pressed, or the
wheel starts again, the screen wakes up and returns to normal display.
Auto mode
When Auto Mode is on, the unit automatically starts/stops measuring func-
tions related to the timer when the wheel is spinning.
the default state, Auto Mode is off.
Battery life indicator
icon comes on. In
If this indicator appears, the battery is beginning to run down. When the
indicator first appears, the battery will last for about one month. When the
indicator begins flashing there are about 10 days remaining. Replace the
battery at this time.
Note: Depending on the environment, the battery life indicator might ap-
pear earlier than expected. Use the indicator as a rough standard.
If the display does not become darker even after adjusting the dis-
play contrast, it is time to replace the battery.
Replacing battery
Battery life: approximately 1 year (if used for 1 hour a day)
Close
In the Menu Screen, battery runs down faster than the normal
measuring screen.
After replacing the battery, press RESTART button on the back
Open
RESTART
CR2032
of the main unit (refer to page 6.)
Caution! The RESTART operation will erase Elapsed Time,
Trip Distance, Average Speed, Maximum Speed
and Clock Time. Set Clock Time correctly after re-
Download from Www.Somanuals.com. All Manuals Search And Download.
placing the battery.
OS 1.0
5
3. Restart/Format/Setup
Restart operation (1.When erratic data appears; 2.After replacing battery)
After replacing the battery, the electric current can be unstable which might
effect the operation of the OS1.0.To avoid this you must press the RESTART
button after replacing the battery.
Note: After restart operation, Elapsed Time, Trip Distance, Average Speed,
Maximum Speed and Clock Time is erased. Set Clock Time again.
Format operation (1.Before first use; 2.When erasing all the stored data)
Caution: Take note that all the data is erased by this operation.
If you want to stop format operation, select "NO" and
the unit returns to measuring screen.
This operation erases all the data and settings.
1. Hold down both MODE/SELECT buttons simultaneously, press and
release RESTART button. The message "FORMAT?" appears.
2. Select "YES" and press ENTER/START/STOP button.
Once format operation is done, the unit need to be set up from the
first step.
Setup
Setup process
Speed scale setting
Tire size setting
Date setting
In addition to Quick Setup that is writ-
ten in the Setup guide, there is Custom
Setup (see the next page). In the Cus-
tom Setup, you can select only your fa-
vorite functions that you want to use,
and you can also choose your preferred
font size and input your personal data.
Note: By pressing the two SELECT/
MODE buttons simultaneously
you can go back to the next pre-
vious screen.
Time scale setting
Clock time setting
Function customizing
Font size setting
Personal data input
Setup finished
Custom setup entrance
NO
YES
Setup finished
Goes to previous screen
QUICK SETUP
CUSTOM SETUP
Download from Www.Somanuals.com. All Manuals Search And Download.
OS 1.0
6
Custom setup
To personalize your Cat Eye OS1.0, select YES in e Custom setup prompt.
Function customizing
You can choose to display just the functions you would like. Press EN-
TER/START/STOP button to select each function you would like to dis-
play.You can also simply SELECT ALL to display all seven cyclocomputer
functions. you can choose any of the following 6 functions (current speed
is always displayed): Elapsed Time, Trip Distance, Average Speed, Maxi-
mum Speed, Total Distance and Clock. To complete function custom-
ization navigate to "FINISHED" and press ENTER/START/STOP button.
(Refer to page12.)
Font size
Choose a display percentage font size.
70:30(%)
50:50(%)
30:70(%)
100(%)
Personal data input
Input your birth-
day by month
and day (mm/
dd).
Input your name. Up
to 16 letters can be
input. (Refer to page
12.)
Setup finished
You can change the settings later in the MENU screen. Refer to
pages 8-12.
Setup finished
Download from Www.Somanuals.com. All Manuals Search And Download.
OS 1.0
7
4. Menu Screen
When MENU button is pressed, the screen changes from measuring screens to menu
screens.
Measuring screen
Menu screens are divided into two categories:
"Data Review" reviews the previous recorded data;
"Function Setting" allows you to change various settings.
Note: In the Menu Screen, battery runs down faster than the normal
measuring screen.
MENU
Data review
Refer to page 9
Maximum
speed
Last ride
day data
Yearly
distance
ever
recorded
Counter-
clockwise
REV
FWD
Clockwise
(
SELECT
)
(
SELECT
)
ENTER
(
START
/
STOP)
Weekly
distance
Monthly
distance
FWD
(
SELECT)
REV
Function
customiz-
ing
Display
contrast
setting
(
SELECT
) Function setting
Date
setting
Personal
distance
Refer to
page 10-12
Mode
navigation
on/off
REV
FWD
Tire size
setting
(
SELECT
Counterclockwise
)
(SELECT)
Clockwise
ENTER
(
START
/
STOP)
Auto
mode
on/off
Clock
time
setting
Font
size
setting
Personal
data
input
Download from Www.Somanuals.com. All Manuals Search And Download.
OS 1.0
8
Data review
Checks and reviews the accumulated data of the past. Press MENU button again to return
to measuring screen.
Last ride day data
ENTER
Shows all the data measured in the last ride day (0:00 -
23:59 or midnight to midnight).When the clock passes mid-
night, the day's data is memorized as the "last ride day data".
(
START
/
STOP
)
SELECT
(MODE)
Maximum speed ever recorded
The maximum speed ever recorded in the past is displayed
together with the recorded date.
ENTER
(
START
/
STOP)
SELECT
Yearly distance
The yearly distance is displayed for the past
six years.
(MODE)
ENTER
ENTER
Press ENTER/START/STOP button and the
screen shows the data in the graph format.
(Maximum value of the graph: 12000km)
(
START
/
STOP
)
(
START
/
STOP)
SELECT
(MODE)
Monthly distance
The monthly distance is displayed for one
year. Press ENTER/START/STOP button
and the screen shows the data in the graph
format by six months period.
ENTER
ENTER
(
START
/
STOP
)
(START
/
STOP)
(Maximum value of the graph: 1200km)
SELECT
(MODE)
Weekly distance
A week's trip distance is displayed day by day.
Press ENTER/START/STOP button and the
screen shows the data in the graph format.
(Maximum value of the graph: 120km)
ENTER
ENTER
(
START
/
STOP
)
(
START
/
STOP)
Caution! If clock time setting is changed during use, incorrect data may accumulate.
Download from Www.Somanuals.com. All Manuals Search And Download.
OS 1.0
9
Menu Screen (continued)
Function setting
The function setting screens allow you to change various programmed
functions. At any time press MENU button to return to normal mea-
suring screens.
Note: By pressing the two SELECT/MODE but-
tons simultaneously you can go back to
Goes to previous screen
the previous on screen.
Auto mode
When Auto mode is on, the unit automatically starts/stops mea-
suring, whenever the computer receives a signal.
on when it is activated.
icon will be
Clock time setting
Changes the clock time setting. When you
have selected 12h mode, take note of the
AM/PM icon.
Font size setting
Select your preferred font size from the four combina-
tions.
Note: When digits exceed the screen size the figures
are automatically reduced. In the default figure it is
70:30.
Personal data input
You can input your name and birthday. Up to 16 letters
can be input for the name. (Refer to page 12.)
Download from Www.Somanuals.com. All Manuals Search And Download.
OS 1.0
10
Tire size setting
Inputs two different tire sizes A and B.
To input it by inch scale, choose EASY. For more ac-
curate measurement, choose CUSTOM and input it
in millimeters, by measuring the exact wheel circum-
ference.
Date setting
Changes the date setting. It is important to input the
correct date as it affects the accumulated data.
Function customizing
Selects only your favorite functions that you
want to use (refer to page 12).
Display contrast setting
Adjusts the contrast of the screen (right: darker, left: lighter).
Note: The darker the display, the higher the battery consumption.
Personal distance
You can input accumulated distance from a different
cyclocomputer. Then the total distance starts mea-
suring from that figure (refer to page 12).
Mode navigation on/off
Shows what is the previous/next function when
MODE button is pressed to navigate to a new func-
tion. In the default setup, mode navigation is on.
Download from Www.Somanuals.com. All Manuals Search And Download.
OS 1.0
11
Menu Screen (continued)
How to change setting
Tire size setting
A or B - Chooses your bike, A or B.
• Press SELECT/MODE button to select A or B.
• Press ENTER/START/STOP to decide.
SIZE --- Changes the figure of the tire sizes A and B.
“EASY” setting:
inputs the figure by the inch size 14
inch - 27 inch;
“CUSTOM” setting: inputs the figure by millimeters 10 -
9999mm
Function customizing Select your favorite functions with SELECT/MODE button. Press
SELECT/MODE button again to clear the selection. If you don’t
select anything,Total Distance is automatically selected.
If you want to select all the functions, choose "SELECT ALL". To
complete the function customizing, navigate to "FINISHED" and
press ENTER/START/STOP button.
Personal distance
You can keep on accumulating the total distance continuously from your pre-
vious cyclocomputer. Up to six digits can be input.
•
•
•
Input the figure for the first digit using SELECT/MODE button.
Press ENTER/START/STOP button and the digit moves to the next digit.
When you reach the last digit (sixth digit), press ENTER/START/STOP but-
ton, and personal distance input is completed.
Personal data
Input your name first.
•
•
•
Navigate the alphabet by pressing SELECT/MODE button. Characters A-Z,
a-z, 0-9, including punctuation marks, a space and
Press ENTER/START/STOP button to select a specific character. Then it
moves to the next letter.
When you have completed selecting all the digits you want, navigate to the
character and press ENTER/START/STOP button. The birthday input
screen now appears.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Input your birthday month and day (mm/dd).
OS 1.0
12
5. Troubleshooting
If a malfunction occurs, check the following items before contacting a dealer for service.
Trouble
Check items
Remedy
The liquid crystal screen appears dark or there are some dark spots.
Was it left for a long time under direct sunlight?
It will go back to normal after a few hours once it is out of the sunlight. Data will not be
effected.
Display response is slow.
Was the ambient temperature too low [below 0C (32F)]?
It will go back to normal when the temperature rises. Data will not be effected.
No display appears.
Is the battery in the main unit worn out?
Replace it with a new one (CR2032). After the battery is replaced, be sure to press RESTART
button.
Meaningless display appears.
Press RESTART button.
Current Speed is not working properly.
Check if there is any object on the contacts of the main unit or the bracket.
Clean the contacts. Main unit is often stained with sweat. Periodically wash it with mild soap
and wipe dry.
Check the clearance between the speed sensor and the magnet.
Check if the mark line of the speed sensor and the magnet is aligned.
Adjust the positions.
Check if the wire is broken or damaged.
Replace the bracket sensor set with a new one.
Measurement does not stop even though START/STOP button is pressed.
Is the Auto Mode on?
When the Auto Mode is on, START/STOP button does not start or stop measurement. Turn
the Auto Mode off. (Refer to "Auto mode" in page 11.)
The size of the figures on the screen is reduced.
When the bigger font size is selected (100%, 70%, 50%), and if the number of digits for trip
distance and total distance exceed the maximum number of digits, the size is automatically
reduced to fit on the screen.
The last ride day data is not correct.
Is the clock time setting correct?
The last ride day data is saved when the clock time passes the midnight. Therefore, if your
clock is not correctly set, the data shown will be incorrect.
Is the unit measuring?
The last ride day data is not updated unless it newly measures data. (See page 9.)
Download from Www.Somanuals.com. All Manuals Search And Download.
OS 1.0
13
6. Specifications
CAT EYE OS1.0
Display functions
Current Speed
Elapsed Time
0.0(3.0) - 65.9 mph [0.0(4.0) - 105.9 km/h]
0:00’00” - 9:59’59”
Trip Distance
0.00 - 99999.99 mile [km]
Average Speed
Maximum Speed
Total Distance
Clock Time
0.0 - 65.9 mph [0.0 - 105.9 km/h]
0.0(3.0) - 65.9 mph [0.0(4.0) - 105.9 km/h]
0.0 - 999999.9 mile [km]
0:00 - 23:59 [AM12:00 - PM11:59]
Indicates if the current speed is higher or lower than the average speed.
Pace Arrow
Data review function
Last Ride Day Data
All the data measured in the last ride day (0:00 - 23:59)
Maximum speed ever recorded The maximum speed ever recorded in the past
Yearly distance
Monthly distance
Weekly distance
The yearly distance for the past six years
The monthly distance for one year
A week's trip distance, day by day
Setting function
Tire size:
Two different tires A and B (default figure: A=2096, B=2050)
EASY: 14 inch - 27/700, CUSTOM: 10 - 9999mm
January 1, 2000 - December 31, 2099
Selects only the preferred functions
Changes the contrast in eight levels
Inputs personal total distance and continues to accumulate from
that figure (maximum figure: 6 digits)
Date
Function customizing
Display contrast
Personal distance
Mode navigation
Personal data
Font size
Shows the previous/next function
Name and birthday (maximum letters for name: 16 letters)
Chooses the font size of the lower display (4 sizes)
in 12h-mode or 24h-mode
Clock time
Control system
Display system
8-bit one-chip microcomputer, crystal oscillator
Liquid crystal display (54x31dot plus icon)
Noncontact magnetic sensor
Speed signal detection system
Operating temperature range
Storage temperature range
Applicable fork diameter
Power supply / battery life
Dimension / weight
32°F - 104°F [0°C - 40°C]
–4°F - 122°F [–20°C - 50°C]
11ø - 36ø
CR2032 x 1 / approx. 1 year (When using 1 hour/day)
2-7/18” x 1-27/32” x 23/32” [62 x 47 x 18 mm] / 1.34 oz [38 g]
DDoewsingnlsoaandd sfpreocmificaWtionwsware.Ssuobmjecat tnouchaalnsg.ecwoitmho.utAnollticMe,aduneutoamlsodSifiecaatiorcnshorAimnpdrovDemoewntns.load.
OS 1.0
14
Optional parts
1 Bracket sensor kit [169-9650]
2 Bracket sensor kit (Long) [169-9651]
3 Speed sensor kit [169-9670]
4 Speed sensor kit (Long) [169-9671]
5 Bracket [169-9660]
34
6 Magnet [169-9690]
7 Screw set [169-9680]
8 Lithium battery [166-5150]
12
7
6
5
8
Limited Warranty
1-Year Warranty for Main Unit Only (Accessories/Attachments and Battery Consumption excluded)
If the computer main unit is operating defectively from normal use, the part of the main unit will be repaired or
replaced free of charge. The service must be performed by Cat Eye Co., Ltd. Please consult our trouble-
shooting page and then a retailer before returning the product to Cat Eye. Pack the main unit carefully with a
detailed explanation of the problem and instruction for repair. Please include your name and address clearly
on your correspondence. Insurance, handling and transportation charges to our service shall be borne by
person desiring service.
CO.,LTD.
2-8-25 Kuwazu Higashi Sumiyoshi-ku, Osaka 546-0041 Japan
Service & Research Address for United States Consumers:
CAT EYE Service & Research Center
1705 14 th St. 115 Boulder CO 80302
Phone: 303-443-4595
FAX: 303-473-0006
Toll Free: 800-5CAT EYE
Download from Www.Somanuals.com. All Manuals Search And Download.
OS 1.0
15
REGISTRATION
CAT EYE Web Site (http://www.cateye.com)
For warranty service you must register your product. Please register your OS1.0 as soon as possible.
CAT EYE provides as much technical support as possible by telephone, e-mail and our web site.
Please register on-line through our web site, or send the registration card below directly to our
Customer Service Department. For registration, please fill in the product's serial number (the 7-
digits number marked on the back of the main unit).
CO.,LTD.
2-8-25 Kuwazu Higashi Sumiyoshi-ku, Osaka 546-0041 Japan
Service & Research Address for United States Consumers:
CAT EYE Service & Research Center
1705 14 th St. 115 Boulder CO 80302
Phone: 303-443-4595
FAX: 303-473-0006
Serial number
Copyright© 2000
CAT EYE Co., Ltd.
OS1UE-001124 2
Printed in Japan
066600051
E
CAT EYE OS1.0
U.S. Pat. Nos. 4642606/5904442/Pat. and Design Pat. Pending
REGISTRATION CARD
®
Model:
Serial No.
Name:
Please fill with 7-digits numbers marked on the back of main unit.
Age:
Street:
City:
State/Providence:
Postal/ZIp code:
Country:
E-mail address: (*We will never share your e-mail address with any other company.)
Dealer or Shop name:
Dealer or Shop address:
The date of purchase:
/
/
DCoowmnmloenatsd: from Www.Somanuals.com. All Manuals Search And Download.
|