Casio Watch 2519 User Manual

USER’S GUIDE 2519  
General Guide  
Press C to change from mode to mode.  
In any mode, press B to illuminate the display.  
In any mode, hold down C for about two seconds to return to the  
Timekeeping Mode.  
Timekeeping Mode  
Alarm Mode  
Stopwatch Mode  
Dual Time Mode  
Press  
.
Timekeeping  
Use the Timekeeping Mode to set and view the  
current time and date.  
To set an alarm time  
Month – Day  
1.In the Alarm Mode, press D to display the alarm  
screen.  
2.Hold down A until the hour setting of the alarm  
time starts to flash, which indicates the setting  
screen.  
This operation automatically turns on the one-  
time alarm.  
3.Press C to move the flashing in the sequence  
shown below to select other settings.  
Day of week  
To set the time and date  
1.In the Timekeeping Mode, hold down A until the  
seconds start to flash, which indicates the setting  
screen.  
2.Press C to move the flashing in the sequence  
shown below to select other settings.  
Seconds  
Day  
Hour  
Minutes  
Year  
Hour  
Minutes  
Month  
Day  
PM indicator  
Month  
Hour : Minutes Seconds  
4. While a setting is flashing, press D to increase it.  
To set an alarm that does not include a month (Daily alarm, Monthly  
3. When the setting you want to change is flashing, press D to change it as  
described below.  
alarm), set x for the month. Press D until the x mark appears (between  
12 and 1) while month setting is flashing.  
To set an alarm that does not include a day (Daily alarm, 1-Month alarm),  
set xx for the day. Press D until the xx mark appears (between the end  
of the month and 1) while the day setting is flashing.  
When setting the alarm time using the 12-hour format, take care to set the  
time correctly as a.m. or p.m. (P indicator).  
To change this setting  
Seconds  
Perform this button operation  
Press D to reset to 00.  
Hour, Minutes, Year, Month, Day Press D to increase the setting.  
Pressing D while the seconds are in the range of 30 to 59 resets them to  
00 and adds 1 to the minutes. In the range of 00 to 29, the minutes are  
unchanged.  
5. Press A to exit the setting screen.  
Alarm Operation  
4. Press A to exit the setting screen.  
The day of the week is automatically displayed in accordance with the date  
(year, month, and day) settings.  
The alarm tone sounds at the preset time for about 10 seconds. In the case of  
the snooze alarm, the alarm repeats up to seven times every five minutes.  
Pressing any button stops the alarm tone operation.  
The alarm and the Hourly Time Signal sound in all modes.  
The year can be set in the range of 2000 to 2099.  
The watch’s built-in full automatic calendar automatically makes allowances  
for different month lengths and leap years. Once you set the date, there  
should be no reason to change it except after you have the watch’s battery  
replaced.  
To select the alarm type  
1.In the Alarm Mode, press D to display the alarm  
screen.  
Alarm on/off indicator  
To toggle between 12-hour and 24-hour timekeeping  
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping  
and 24-hour timekeeping.  
2.Press A to cycle through the available alarm  
settings shown below.  
With the 12-hour format, the P (PM) indicator appears to the left of the hour  
digits for times in the range of noon to 11:59 p.m. and no indicator appears to  
the left of the hour digits for times in the range of midnight to 11:59 a.m.  
With the 24-hour format, times are displayed in the range of 0:00 to 23:59,  
without any indicator.  
[Module 2518]  
[Module 2518]  
9]  
[Module 251  
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode  
is applied in all other modes.  
Alarm off  
One-time  
alarm on  
Snooze  
alarm on  
The alarm on indicator and the snooze alarm on  
indicator are shown on the display in all modes  
while these functions are turned on.  
The snooze alarm on indicator flashes during the  
5-minute intervals between alarms.  
Alarm  
The multi-function alarm lets you specify the hour,  
minutes, month, and day for the alarm. You can set up  
the alarm so it sounds once when the alarm time is  
reached, or for a snooze alarm that repeats up to seven  
times, every five minutes.  
Month – Day  
[Module 2519]  
Displaying the Alarm Mode setting screen automatically changes the alarm  
type to one-time alarm.  
Changing the Timekeeping Mode setting screen during a 5-minute interval  
between snooze alarms stops the current snooze alarm operation (but  
snooze alarm remains as the alarm type setting).  
If a snooze alarm time is reached while you are setting the current time in the  
Timekeeping Mode, the alarm sounds only once. Subsequent snooze alarm  
operations are not performed.  
You can also turn on an Hourly Time Signal that causes  
the watch to beep twice every hour on the hour.  
Pressing D in the Alarm Mode toggles between  
the alarm screen (Alarm time displayed) and the  
:00  
Hourly Time Signal screen (  
displayed).  
Hour : Minutes  
An alarm setting (and an Hourly Time Signal  
setting) is available in the Alarm Mode, which you  
enter by pressing C.  
Stopping a Snooze Alarm Operation  
After a snooze alarm time is reached, you can perform the following steps  
during any 5-minute interval between alarms to stop the snooze alarm  
operation.  
Alarm Types  
The alarm type is determined by the settings you make, as described below.  
Daily alarm  
Set the hour and minutes for the alarm time. This type of setting causes the  
alarm to sound everyday at the time you set.  
To stop a Snooze Alarm Operation  
1. While in the Alarm Mode, press D to display the alarm screen.  
2. Next, press A to turn off the alarm or to select the one-time alarm.  
Note that this also changes the alarm type setting. If you want to use the  
snooze alarm again, you must re-select it as the alarm type. See “To select  
the alarm type” for more information.  
Date alarm  
Set the month, day, hour and minutes for the alarm time. This type of setting  
causes the alarm to sound at the specific time, on the specific date you set.  
1-Month alarm  
Set the month, hour and minutes for the alarm time. This type of setting causes  
the alarm to sound everyday at time you set, only during the month you set.  
To test the alarm  
In the Alarm Mode, hold down D to sound the alarm.  
Monthly alarm  
Set the day, hour and minutes for the alarm time. This type of setting causes  
the alarm to sound every month at time you set, on the day you set.  
To turn the Hourly Time Signal on and off  
1. In the Alarm Mode, press D to display the Hourly Time Signal screen.  
2. Press A to turn it on and off.  
Indicates Hourly Time Signal is on.  
[Module 2518] [Module 2519]  
Indicates Hourly Time Signal is off.  
The Hourly Time Signal on indicator is shown on the display in all modes  
while this function is turned on.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  

Belkin Network Card 42U User Manual
Belkin Power Supply Power Supply User Manual
Billion Electric Company Network Router 7402G User Manual
Black Decker Lawn Mower CM1936ZF2 User Manual
Boss Audio Systems Stereo Receiver TU 12BW User Manual
Breville Waffle Iron BGR820XL User Manual
Bush Hog Saw 00786976C User Manual
Canon All in One Printer 2237B007AA User Manual
Canon Camera Lens 2539A007 User Manual
Cecilware Fryer F 100 User Manual