Casio Video Game Keyboard LK200ES1A User Manual

ES  
USER’S GUIDE  
GUÍA DEL USUARIO  
LK200ES1A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Congratulations on your selection of the CASIO  
electronic musical instrument.  
Symbol Examples  
Before using the instrument, be sure to carefully  
read through the instructions contained in this  
manual.  
Be sure to keep all user documentation handy for  
future reference.  
This triangle symbol ( ) means that the  
user should be careful. (The example at  
left indicates electrical shock caution.)  
This circle with a line through it (  
)
means that the indicated action must not  
be performed. Indications within or  
nearby this symbol are specifically  
prohibited. (The example at left indicates  
that disassembly is prohibited.)  
Symbols  
Various symbols are used in this users guide and on  
the product itself to ensure that the product is used  
safely and correctly, and to prevent injury to the user  
and other persons as well as damage to property.  
Those symbols along with their meanings are shown  
below.  
The black dot ( ) means that the  
indicated action must be performed.  
Indications within this symbol are actions  
that are specifically instructed to be  
performed. (The example at left indicates  
that the power plug must be unplugged  
from the electrical socket.)  
DANGER  
This symbol indicates information that, if ignored  
or applied incorrectly, creates the danger of death  
or serious personal injury.  
WARNING  
This indication stipulates matters that have the risk  
of causing death or serious injury if the product is  
operated incorrectly while ignoring this indication.  
CAUTION  
This indication stipulates matters that have the risk  
of causing injury as well as matters for which there  
is the likelihood of occurrence of physical damage  
only if the product is operated incorrectly while  
ignoring this indication.  
663A-E-003A  
E-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
G Never touch the AC adaptor while your  
hands are wet.  
Doing so creates the risk of electric shock.  
G Use the AC adaptor where it will not be  
splashed with water. Water creates the  
risk of fire and electric shock.  
G Do not place a vase or any other container  
filled with liquid on top of the AC  
adaptor. Water creates the risk of fire  
and electric shock.  
DANGER  
Alkaline Batteries  
Perform the following steps immediately if  
fluid leaking from alkaline batteries ever  
gets into your eyes.  
1. Do not rub your eyes! Rinse them with  
water.  
2. Contact your physician immediately.  
Leaving alkaline battery fluid in your eyes  
can lead to loss of sight.  
Batteries  
Misuse of batteries can cause them to leak,  
resulting in damage to nearby objects, or to  
explode, creating the risk of fire and  
personal injury. Always make sure you  
observe the following precautions.  
Never try to take batteries apart or allow  
them to become shorted.  
Never expose batteries to heat or dispose  
of them by incineration.  
Never mix old batteries with new ones.  
Never mix batteries of different types.  
Do not charge the batteries.  
WARNING  
Smoke, Strange Odor, Overheating  
Continued use of the product while it is  
emitting smoke, a strange odor, or heat  
creates the risk of fire and electric shock.  
Take the following steps immediately.  
1. Turn off power.  
2. If you are using the AC adaptor for  
power, unplug it from the wall outlet.  
3. Contact your original retailer or an  
authorized CASIO Service Provider.  
Make sure the positive (+) and negative  
() ends of the batteries are facing  
correctly.  
AC Adaptor  
Do not incinerate the product.  
G Misuse of the AC adaptor creates the  
risk of fire and electric shock. Always  
make sure you observe the following  
precautions.  
Never throw the product into fire.  
Doing so can cause it to explode, creating  
the risk of fire and personal injury.  
Be sure to use only the AC adaptor  
that is specified for this product.  
Use only a power source whose  
voltage is within the rating marked on  
the AC adaptor.  
Do not overload electrical outlets and  
extension cords.  
G Misuse of the AC adaptors electric cord  
can damage or break it, creating the risk  
of fire and electric shock. Always make  
sure you observe the following  
precautions.  
Water and Foreign Matter  
Water, other liquids, and foreign matter  
(such as pieces of metal) getting into the  
product create the risk of fire and electric  
shock. Take the following steps  
immediately.  
1. Turn off power.  
2. If you are using the AC adaptor for  
power, unplug it from the wall outlet.  
3. Contact your original retailer or an  
authorized CASIO Service Provider.  
Never place heavy objects on the cord  
or subject it to heat.  
Never try to modify the cord or subject  
it to excessive bending.  
Never twist or stretch the cord.  
Should the electric cord or plug  
become damaged, contact your  
original retailer or authorized CASIO  
Service Provider.  
Disassembly and Modification  
Never try to take this product apart or  
modify it in any way. Doing so creates the  
risk of electric shock, burn injury, or other  
personal injury. Leave all internal  
inspection, adjustment, and maintenance up  
to your original retailer or authorized  
CASIO Service Provider.  
E-2  
663A-E-004A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Dropping and Impact  
CAUTION  
Continued use of this product after it has  
been damaged by dropping or subjecting it  
to strong impact creates the risk of fire and  
electric shock. Take the following steps  
immediately.  
AC Adaptor  
G Misuse of the AC adaptor creates the  
risk of fire and electric shock. Always  
make sure you observe the following  
precautions.  
Do not locate the electric cord near a  
stove or other sources of heat.  
Never pull on the cord when  
unplugging from the electrical outlet.  
Always grasp the AC adaptor when  
unplugging.  
G Misuse of the AC adaptor creates the  
risk of fire and electric shock. Always  
make sure you observe the following  
precautions.  
1. Turn off power.  
2. If you are using the AC adaptor for  
power, unplug it from the wall outlet.  
3. Contact your original retailer or an  
authorized CASIO Service Provider.  
Plastic Bags  
Never place the plastic bag the product  
comes in over your head or in your mouth.  
Doing so creates the risk of suffocation.  
Particular care concerning this precaution  
is required where small children are  
present.  
Insert the AC adaptor into the wall  
outlet as far as it will go.  
Unplug the AC adaptor from the wall  
outlet during lightening storms or  
before leaving on a trip or other long-  
term absence.  
At least once a year, unplug the AC  
adaptor from the wall outlet and wipe  
away any dust that is built up in the  
area around the prongs of the plug.  
Keep off of the product and stand.*  
Climbing onto the product or stand can  
cause it to tip over or become damaged.  
Particular care concerning this precaution  
is required where small children are  
present.  
Location  
Avoid locating the product on an unstable  
stand, on an uneven surface, or any other  
unstable location. An unstable location can  
cause the product to fall over, creating the  
risk of personal injury.  
Relocating the Product  
Before relocating the product, always  
unplug the AC adaptor from the wall outlet  
and disconnect all other cables and  
connecting cords. Leaving cords connected  
creates the risk of damage to the cords, fire,  
and electric shock.  
Cleaning  
Before cleaning the product, always unplug  
the AC adaptor from the wall outlet first.  
Leaving the AC adaptor plugged in creates  
the risk of damage to the AC adaptor, fire,  
and electric shock.  
Batteries  
Misuse of batteries can cause them to leak  
resulting in damage to nearby objects, or to  
explode, creating the risk of fire and  
personal injury. Always make sure you  
observe the following precautions.  
Use only batteries that are specified for  
use with this product.  
Remove batteries from the product if you  
do not plan to use it for a long time.  
663A-E-005A  
E-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Connectors  
Should you ever feel any symptoms  
similar to those described above when  
using this product, stop using it  
immediately and contact your physician.  
Connect only the specified devices and  
equipment to the products connectors.  
Connection of a non-specified device or  
equipment creates the risk of fire and  
electric shock.  
Heavy Objects  
Never place heavy object on top of the  
product.  
Doing so can make the product top heavy,  
causing the product to tip over or the object  
to fall from it, creating the risk of personal  
injury.  
Location  
Avoid the following locations for this  
product. Such locations create the risk of  
fire and electric shock.  
Areas subject to high humidity or large  
amounts of dust.  
In food preparation areas or other areas  
subject to oil smoke.  
Near air conditioning equipment, on a  
heated carpet, in areas exposed to direct  
sunlight, inside of a vehicle parked in  
the sun, or any other area that subjects  
the product to high temperatures.  
Correct Stand* Assembly  
An incorrectly assembled stand can tip over,  
causing the product to fall and creating the  
risk of personal injury.  
Make sure you assemble the stand correctly,  
following the assembly instructions that  
come with it. Make sure you mount the  
product on the stand correctly.  
Display Screen  
Never push on the display screens LCD  
panel or subject it to strong impact. Doing  
so can cause the LCD panels glass to  
crack, creating the risk of personal injury.  
Should the LCD panel ever crack or  
break, never touch the liquid inside of  
the panel. LCD panel liquid can cause  
skin irritation.  
* Stand is available as an option.  
IMPORTANT!  
When using batteries, be sure to replace them or shift to  
one of the alternate power sources whenever you notice  
any of the following symptoms.  
Should LCD panel liquid ever get inside  
your mouth, immediately wash out your  
mouth with water and contact your  
physician.  
Should LCD panel liquid ever get into  
your eyes or onto your skin, rinse with  
clear water for at least 15 minutes, and  
then contact a physician.  
• Dim power supply indicator  
• Instrument does not turn on  
• Dim, difficult to read display  
• Abnormally low speaker/headphone volume  
• Distortion of sound output  
• Occasional interruption of sound when playing at high  
volumes  
• Sudden power failure when playing at high volumes  
• Dimming of the display when playing at high volume  
• Continued sound output even after you release a key  
• A totally different tone may sound  
• Abnormal rhythm pattern and demo tune play  
• Abnormally low microphone volume  
Sound Volume  
Do not listen to music at very loud volumes  
for long periods. Particular care concerning  
this precaution is required when using  
headphones. High volume settings can  
damage your hearing.  
• Distortion of microphone input  
• Dim power supply indicator when a microphone is used  
• Sudden power failure when using the microphone  
• Dimming of keyboard lights when notes sound  
• Loss of power, sound distortion, or low volume when  
playing from a connected computer  
Health Precaution  
In extremely rare cases, exposure to strong  
sudden light or flashing light can cause  
momentary muscle spasms, loss of  
consciousness, or other physical problems  
with some individuals.  
If you suspect that you might be  
susceptible to any condition such as this,  
be sure to consult with your physician  
before using this product.  
Use this product in an area that is well  
illuminated.  
E-4  
663A-E-006A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Main Features  
264 tones  
A wide selection of tones includes stereo piano and synthesized sounds, drum sets, and much more.  
Other features include digital effects that control the acoustical characteristic of tones.  
PIANO BANK button  
The touch of a button takes you directly to piano tones and piano lessons.  
3-Step Lesson System  
The 3-Step Lesson System lets you practice at your own pace. The keyboard automatically grades your performances, so you can  
trace your progress as you improve.  
3-Step Lesson System: Use any of the keyboards built-in tunes and SMF data from a memory card to learn to play as the  
keyboard keys light to teach you the correct notes. First practice the timing of the notes. Next, play along at your own pace.  
Soon you will be ready for step three, where you play along at normal speed.  
* Note that key lights may be difficult to see under direct sunlight or under other very bright lighting.  
Evaluation System: The keyboard can be configured to rate your performances during Step 3 lesson by assigning points.  
100 built-in tunes, including piano pieces  
Built-in tunes are divided into two groups: a Song Bank of 65 tunes with Auto Accompaniment, and a Piano Bank of 35 piano  
tunes. You can simply enjoy listening to the built-in tunes, or eliminate either hand part of a tune, and then play along on the  
keyboard.  
120 rhythms  
A selection of rhythms cover rock, pops, jazz and just about any other musical style imaginable.  
Auto Accompaniment  
Simply play a chord and the corresponding rhythm, bass, and chord parts play along automatically.  
Musical Information System  
A big LCD screen graphically shows you fingerings and notes, making keyboard play more informative and enjoyable than ever  
before.  
Storing and Playing Back Tune Data You Transferred from Your Computer  
You can connect your keyboard to a computer, use special CASIO conversion software to convert SMF data you purchase or  
create to CASIO format, and then transfer it to the keyboard.  
Memory Card Slot  
You can load a card with a standard MIDI file (SMF) and play it back on the keyboard.  
663A-E-007A  
E-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Safety Precautions.................... E-1  
Main Features ............................ E-5  
Playing a Built-in Tune............ E-18  
To play back a Song Bank tune ............. E-18  
To play back a Piano Bank tune............. E-19  
Musical Information System ................... E-19  
Adjusting the Tempo............................... E-19  
To pause playback ................................. E-20  
To fast reverse ....................................... E-20  
To fast forward ....................................... E-20  
Looping a Musical Phrase...................... E-20  
To change the melody tone .................... E-21  
To play all tunes in succession............... E-21  
Using the PIANO BANK Button ............. E-21  
General Guide............................ E-8  
Attaching the Score Stand ..................... E-10  
Quick Reference .......................E-11  
To play the keyboard .............................. E-11  
Power Supply .......................... E-12  
Using batteries ....................................... E-12  
Using the AC Adaptor............................. E-13  
Auto Power Off....................................... E-13  
Power On Alert ....................................... E-14  
Memory Contents................................... E-14  
Using the SMF Data on the  
Bundled CD-ROM .................................. E-21  
3-Step Lesson.......................... E-22  
Connections ............................ E-14  
Phones/Output Jack............................... E-14  
USB port ................................................ E-15  
Sustain/Assignable Jack ........................ E-15  
Microphone Jack .................................... E-15  
Accessories and Options ....................... E-15  
Evaluation Mode .................................... E-23  
Using the Lesson Functions and  
Evaluation Mode .................................... E-24  
Step 1 – Master the timing. .................... E-24  
Step 2 – Master the notes. ..................... E-24  
Step 3 – Play at normal speed. .............. E-25  
Voice Fingering Guide............................ E-26  
Using the Metronome............................. E-26  
Basic Operations..................... E-16  
To play the keyboard .............................. E-16  
Selecting a Tone..................................... E-16  
Using Tone Effects ................................. E-17  
Turning the Key Light System  
On and Off.............................................. E-17  
Using the Microphone Jack.................... E-17  
E-6  
663A-E-008A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Auto Accompaniment ............. E-27  
Selecting a Rhythm ................................ E-27  
Playing a Rhythm ................................... E-28  
Using Auto Accompaniment ................... E-28  
Using an Intro Pattern ............................ E-30  
Using a Fill-in Pattern............................. E-30  
Using a Rhythm Variation....................... E-30  
Troubleshooting ...................... E-43  
Specifications .......................... E-45  
Care of your keyboard ............ E-46  
Appendix .................................... A-1  
Tone List / Note Table............................... A-1  
Drum Assignment List .............................. A-4  
FINGERED Chord Chart .......................... A-5  
Rhythm List .............................................. A-6  
Song List .................................................. A-7  
Using a Fill-in Pattern with a Variation  
Rhythm................................................... E-31  
Synchro Starting Accompaniment with  
Rhythm Play........................................... E-31  
Finishing with an Ending Pattern ........... E-31  
MIDI messages that can be sent  
and received using the USB port  
Keyboard Settings .................. E-32  
Adjusting Accompaniment and  
Song Bank Volume ................................ E-32  
Transposing the Keyboard ..................... E-33  
Tuning the Keyboard .............................. E-33  
Connection to a Computer ..... E-34  
Connecting to a Computer ..................... E-34  
Expanding the Selections in the  
Song Bank Tunes................................... E-35  
General MIDI Tone ................................. E-36  
Changing the Settings............................ E-36  
Using a Memory Card ............. E-38  
Getting Ready ........................................ E-39  
Reading a Memory Card ........................ E-40  
Memory Card Error Messages ............... E-41  
Company and product names used in this  
manual may be registered trademarks of  
others.  
663A-E-009A  
E-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Guide  
1
2
3
4
5
6
7
8
9
0
A
B
O
C
D
E
F
G
H
I J  
K
L
M
N
P
K
*1 *2  
*
3
Q
R
S
U
V
W
X
Y
Z
[
\
T
E-8  
663A-E-010A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Guide  
1
2
3
4
5
6
7
J
K
L
M
N
O
P
Q
R
S
T
MIC VOLUME slider  
Power indicator  
CHORD root names  
Speaker  
POWER/MODE switch  
MAIN VOLUME slider  
FUNCTION button  
RHYTHM list  
TONE list  
SONG BANK list  
Display  
REVERB/CHORUS button  
KEY LIGHT button  
PIANO BANK list  
Voice 1 to 5 list  
TONE button  
RHYTHM button  
DATA ACCESS lamp  
G SONG/PIANO BANK/RHYTHM CONTROLLER  
8
REPEAT button, INTRO button  
9
REW button, NORMAL/FILL-IN button  
0
FF button, VARIATION/FILL-IN button  
A
PAUSE button, SYNCHRO/ENDING button  
G 3-STEP LESSON  
B
U
PLAY/STOP button, START/STOP button  
STEP 1 button  
C
V
Rhythm controller indicator  
STEP 2 button  
D
W
Song/Piano Bank controller indicator  
STEP 3 button  
X
SCORING button  
E
TEMPO buttons  
Y
LEFT button  
F
SONG BANK button  
Z
RIGHT button  
G
PIANO BANK button  
[
METRONOME button  
H
CARD button  
\
SPEAK button  
I
Percussion instrument list  
Controller Indicators  
Song/Piano Bank controller indicator  
Pressing the SONG BANK or PIANO BANK button causes the Song/Piano Bank controller indicator to light. This indicates that  
buttons 8 through B are currently functioning as playback control buttons.  
Rhythm controller indicator  
Pressing the RHYTHM button to enter the Rhythm Mode causes the Rhythm controller indicator to light. This indicates that  
buttons 8 through B are currently functioning as rhythm control buttons.  
NOTE  
Display examples shown in this Users Guide are intended for illustrative purposes only. The actual text and values that  
appear on the display may differ from the examples shown in this Users Guide.  
Viewing a liquid crystal display screen from an angle can change the appearance of display contrast. The display contrast of  
this keyboard is set to allow easy viewing for a person seated on a chair in front of the keyboard. Note that display contrast  
is fixed, and cannot be adjusted.  
663A-E-011A  
E-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Guide  
*1 Attaching the Score Stand  
Insert both ends of the music stand provided  
with the keyboard into the two holes on the  
top surface.  
*2  
]
^
]
[+] []  
/
buttons  
Negative values cannot be  
input using the number  
buttons. Use [+] (increase)  
and [] (decrease) instead.  
For input of numbers to  
change a displayed number  
or setting.  
^
Number buttons  
*3  
a
a
SD CARD SLOT  
Rear Panel  
c
d
e
f
b
b
c
d
e
f
USB port  
SUSTAIN/ASSIGNABLE JACK  
DC 9V jack  
MIC IN jack  
PHONES/OUTPUT jack  
E-10  
663A-E-012A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Reference  
POWER/MODE  
SONG BANK  
PIANO BANK  
Power indicator  
Number buttons  
STEP2  
STEP1  
PLAY/STOP  
This section provides a quick overview of keyboard operation  
using steps one and two of the 3-step lesson feature.  
3 Find the tune you want to play in the SONG BANK  
List, and then use the number buttons to input its  
two-digit number.  
See page A-7 for the SONG BANK List.  
Example: To select 54 ALOHA OE, input 5 and then  
To play the keyboard  
4.  
1 Set the POWER/MODE switch to NORMAL.  
This causes the power indicator to light.  
A l o h a  
O
e
Lit  
4 Press the STEP 1 button or STEP 2 button.  
The keyboard sounds a count beat and waits for you  
to play something on the keyboard. The keys that you  
need to press first flash.  
2 Press the SONG BANK button.  
5 Play the melody along with the selected tune’s  
accompaniment.  
Play in accordance with the fingerings, notes, and  
dynamic marks that appear on the display.  
Note pitch Fingering  
Indicator appears  
A l o h a  
O
e
663A-E-013A  
E-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Reference  
Power Supply  
If you selected lesson Step 1  
This keyboard can be powered by current from a standard  
household wall outlet (using the specified AC adaptor) or by  
batteries. Always make sure you turn the keyboard off  
whenever you are not using it.  
Play the notes on the keyboard.  
Accompaniment (left-hand part) plays in time with  
the notes.  
With Step 1, the correct melody note is played no  
matter which keyboard key you press.  
Using batteries  
Always make sure you turn off the keyboard before loading  
or replacing batteries.  
To load batteries  
If you selected lesson Step 2  
Play the correct notes on the keyboard.  
1 Remove the battery compartment cover.  
2 Load 6 AA-size batteries into the battery  
compartment.  
Make sure that the positive (+) and negative () ends  
are facing correctly.  
Press the keyboard key that lights. Note that with a  
Piano Bank tune, the keyboard key light turns off as  
soon as you press the key.  
The keyboard key for the next note you will need to  
play flashes.  
Accompaniment (left-hand part) plays in time with  
the notes, as long as you press the correct keyboard  
keys.  
6 To stop play at any time, press the PLAY/STOP  
3 Insert the tabs on the battery compartment cover  
button.  
into the holes provided and close the cover.  
NOTE  
To play an Etude or Concert Piece tune  
The keyboard may not function correctly if you load or  
replace batteries with power turned on. If this happens,  
turning the keyboard off and then back on again should  
return functions back to normal.  
1 When you get to step 2 of the above procedure,  
press the PIANO BANK button in place of the  
SONG BANK button.  
Important Battery Information  
I
The following shows the approximate battery life.  
Manganese batteries ............................... 1 hour  
Alkaline batteries .................................... 4 hours  
The above value is standard battery life at normal  
temperature, with the keyboard volume at medium  
setting. Temperature extremes or playing at very loud  
volume settings can shorten battery life.  
Indicator appears  
2 Find the tune you want to play in the PIANO BANK  
List, and then use the number buttons to input its  
two-digit number.  
See page A-7 for the PIANO BANK List.  
3 Next, continue from step 4 of the above procedure.  
E-12  
663A-E-014A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Supply  
Note the following important precautions to avoid damage  
to the power cord.  
WARNING  
Misuse of batteries can cause them to leak, resulting in  
damage to nearby objects, or to explode, creating the risk of  
fire and personal injury. Always make sure you observe the  
following precautions.  
Never try to take batteries apart or allow them to  
become shorted.  
GDuring Use  
Never pull on the cord with excessive force.  
Never repeatedly pull on the cord.  
Never twist the cord at the base of the plug or connector.  
The power cord should not be stretched tight while it is  
in use.  
Never expose batteries to heat or dispose of them by  
incineration.  
GDuring Movement  
Never mix old batteries with new ones.  
Never mix batteries of different types.  
Do not charge the batteries.  
Make sure the positive (+) and negative () ends of  
the batteries are facing correctly.  
Before moving the keyboard, be sure to unplug the AC  
adaptor from the power outlet.  
GDuring Storage  
Loop and bundle the power cord, but never wind it  
around the AC adaptor.  
CAUTION  
IMPORTANT!  
Misuse of batteries can cause them to leak resulting in  
damage to nearby objects, or to explode, creating the risk of  
fire and personal injury. Always make sure you observe the  
following precautions.  
Use only batteries that are specified for use with this  
product.  
Make sure that the keyboard is turned off before  
connecting or disconnecting the AC adaptor.  
Using the AC adaptor for a long time can cause it to  
become warm to the touch. This is normal and does not  
indicate malfunction.  
Remove batteries from the product if you do not plan  
to use it for a long time.  
Auto Power Off  
When you are using battery power, keyboard power turns  
off automatically whenever you leave it on without  
performing any operation for about 6 minutes. When this  
happens, adjust the POWER/MODE switch to turn power  
back on.  
Using the AC Adaptor  
Make sure that you use only the AC adaptor specified for  
this keyboard.  
Specified AC Adaptor: AD-5  
[Rear Panel]  
NOTE  
Auto Power Off is disabled (it does not function) when  
you are using the AC adaptor to power the keyboard.  
DC 9V jack  
AC adaptor AD-5  
To disable Auto Power Off  
Hold down the TONE button while turning on the keyboard  
to disable Auto Power Off.  
NOTE  
AC outlet  
When this function is turned off, the keyboard does not  
turn off automatically no matter how long it is left with  
no operation being performed.  
Auto Power Off is enabled again when you manually  
turn off power and then turn it back on again.  
663A-E-015A  
E-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Supply  
Connections  
Power On Alert  
Phones/Output Jack  
Keyboard keys light to alert you if you leave power on and  
do not perform any operation for about 6 minutes. Note that  
keys light only, and no sound is produced. When this  
happens, press any button or keyboard key to clear the power  
on alert.  
PREPARATION  
Before connecting headphones or other external  
equipment, be sure to first turn down the volume settings  
of the keyboard and the connected equipment. You can  
then adjust volume to the desired level after connections  
are complete.  
NOTE  
Power on alert operates only when you are powering  
the keyboard using the AC adaptor. It does not operate  
when you are using batteries.  
[Rear Panel]  
PHONES/OUTPUT jack  
1
Audio connection  
Stereo standard plug  
To turn off power on alert  
White  
Red  
PIN plug  
2
LEFT RIGHT  
1 Press the FUNCTION button a number of times until  
DEMO 2appears on the display.  
AUX IN or similar terminal  
of audio amplifier  
3
Keyboard amp,  
guitar amp, etc.  
2 Use the [+] and [] buttons to change the setting to  
oFF.  
1
Connecting Headphones (Figure  
)
Connecting headphones cuts off output from the keyboards  
built-in speakers, so you can play even late at night without  
disturbing anyone.  
3 Press the FUNCTION button to clear the setting  
screen from the display.  
2
Audio Equipment (Figure  
)
Memory Contents  
Even when the keyboard is turned off, user song data saved  
as Song Bank tunes are retained as long as power is being  
supplied to the keyboard.  
Unplugging the AC adaptor when batteries are not loaded  
or when batteries are dead cuts off the power supply. This  
causes all keyboard settings to be initialized to the initial  
factory defaults, and clears all data stored in memory.  
Connect the keyboard to an audio equipment using a  
commercially available connecting cord with a standard plug  
on one end and two PIN plugs on the other end. Note that  
the standard plug you connect to the keyboard must be a  
stereo plug, otherwise you will be able to output only one of  
stereo channels. In this configuration, you normally set the  
input selector of the audio equipment to the terminal (usually  
marked AUX IN or something similar) where the cord from  
the keyboard is connected. See the user documentation that  
comes with your audio equipment for full details.  
Power Requirements  
3
Musical Instrument Amplifier (Figure  
)
Note the following precautions whenever you want to ensure  
that current keyboard settings and memory contents are not  
lost.  
Use a commercially available connecting cord to connect the  
keyboard to a musical instrument amplifier.  
Make sure the keyboard is being supplied power through  
the AC adaptor before replacing its batteries.  
Before unplugging the AC adaptor, make sure that fresh  
batteries are loaded in the keyboard.  
NOTE  
Be sure to use a connecting cord that has a stereo  
standard plug on the end you connect to the keyboard,  
and a connector that provides dual channel (left and  
right) input to the amplifier to which you are connecting.  
The wrong type of connector at either end can cause  
one of the stereo channels to be lost.  
Make sure that keyboard power is turned off before replacing  
batteries or unplugging the AC adaptor.  
When connected to a musical instrument amplifier, set the  
volume of the keyboard to a relatively low level and make  
output volume adjustments using the amplifiers controls.  
E-14  
663A-E-016A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connection Example  
Microphone Jack  
PIN plug (red)  
PIN jack  
You can connect a commercially available microphone to the  
microphone jack and sing along with notes played on the  
keyboard. For details, see Using the Microphone Jackon  
page E-17.  
To keyboards  
PHONES/OUTPUT  
jack  
INPUT 1  
INPUT 2  
PIN plug (white)  
Keyboard or  
guitar amp  
Stereo standard plug  
Standard plug  
Accessories and Options  
Use only the accessories and options specified for this  
keyboard. Use of non-authorized items creates the danger of  
fire, electrical shock, and personal injury.  
USB port  
You can also connect the keyboard to a computer. See  
Connecting to a Computeron page E-34 for details.  
Sustain/Assignable Jack  
You can connect an optional sustain pedal (SP-3 or SP-20) to  
the SUSTAIN/ASSIGNABLE JACK to enable the capabilities  
described below.  
For details on how to select the pedal function you want, see  
SUSTAIN/ASSIGNABLE JACK (Default: SUS)on page  
E-37.  
SUSTAIN/ASSIGNABLE JACK  
SP-20  
Sustain Pedal  
With piano tones, depressing the pedal causes notes to  
linger, much like a pianos damper pedal.  
With organ tones, depressing the pedal causes notes to  
continue to sound until the pedal is released.  
Sostenuto Pedal  
As with the sustain pedal function described above,  
depressing the sostenuto pedal causes notes to be sustained.  
This difference between a sostenuto pedal and sustain pedal  
is the timing. With a sostenuto pedal, you press the keys  
and then depress the pedal before you release the keys.  
Only the notes that are sounding when the pedal is  
depressed are sustained.  
Soft Pedal  
Depressing the pedal softens the sound of the notes being  
played.  
Rhythm Start/Stop Pedal  
In this case, the pedal performs the same functions as the  
START/STOP button.  
663A-E-017A  
E-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
MAIN VOLUME  
POWER/MODE  
REVERB/CHORUS  
TONE  
[+] / []  
MIC VOLUME  
KEY LIGHT  
Number buttons  
This section provides information on performing basic  
keyboard operations.  
3 Use the number buttons to input the three-digit tone  
number of the tone you want to select.  
Example: To select 049 ACOUSTIC BASS, input 0, 4  
and then 9.  
To play the keyboard  
1 Set the POWER/MODE switch to NORMAL.  
A c o . B a s  
s
2 Use the MAIN VOLUME slider to set the volume  
to a relatively low level.  
NOTE  
Always input all three digits for the tone number,  
including leading zeros (if any). If you input one or two  
digits and stop, the display will automatically clear your  
input after a few seconds.  
You can also increment the displayed tone number by  
pressing [+] and decrement it by pressing [].  
When one of the drum sets is selected (tone numbers  
256 through 263), each keyboard key is assigned a  
different percussion sound. See page A-4 for details.  
3 Play something on the keyboard.  
Selecting a Tone  
This keyboard comes with 264 built-in tones. Use the  
following procedure to select the tone you want.  
To select a tone  
1 Find the tone you want to use in the TONE List and  
note its tone number.  
Polyphony  
Not all of the available tones are shown on the tone  
list printed on the keyboard console. For a complete  
list, see the Tone Liston page A-1.  
The term polyphony refers to the maximum number of notes  
you can play at the same time. The keyboard has 32-note  
polyphony, which includes the notes you play as well as the  
rhythms and auto-accompaniment patterns that are played  
by the keyboard. This means that when a rhythm or auto-  
accompaniment pattern is being played by the keyboard, the  
number of notes (polyphony) available for keyboard play is  
reduced. Also note that some of the tones offer only 16-note  
polyphony.  
2 Press the TONE button.  
When rhythm or auto accompaniment is playing, the  
number of sounds simultaneously played is reduced.  
Indicator appears  
E-16  
663A-E-018A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Using the Microphone Jack  
Using Tone Effects  
Connecting a commercially available microphone to the MIC  
IN jack makes it possible to sing along with the keyboards  
built-in tunes or with SMF playback. When connecting a  
microphone, be sure to first adjust the MIC VOLUME to a  
relatively low setting, and then adjust to the level you want  
after connecting.  
Reverb: Makes your notes resonate  
Chorus: Adds more breadth to your notes  
1 Press the REVERB/CHORUS button to cycle through  
the effect settings as shown below.  
You can find out the current effect setting by looking  
at the REVERB and CHORUS indicators.  
1 Set the MIC VOLUME slider setting so it is on the  
MINside.  
On  
On  
On  
Off  
2 Turn on the microphones on/off switch.  
Reverb on  
Chorus on  
Both on  
Both off  
3 Use the MIC VOLUME slider to adjust microphone  
volume to the level you want.  
[Rear Panel]  
2 After turning on the effect you want, use the number  
buttons or the [+]/[] buttons to select the effect  
Microphone on/off switch  
type you want.  
Microphone  
Note that you need to select an effect type with the  
number buttons or the [+]/[] buttons within a few  
seconds after turning on an effect. If you dont, the  
display will exit the setting screen.  
Effect List  
Chorus  
0: Chorus 1  
1: Chorus 2  
2: Chorus 3  
3: Chorus 4  
Reverb  
0: Room 1  
1: Room 2  
2: Hall 1  
3: Hall 2  
MIC VOLUME slider  
IMPORTANT!  
Turning the Key Light System On  
and Off  
Be sure to use the microphones on/off switch to turn off  
the microphone and to disconnect the microphone from  
the keyboard whenever you are not using it.  
Use the following procedure when you want to turn the key  
light system on or off.  
Recommended Microphone Type  
Dynamic microphone (standard plug)  
To turn the key light system on and off  
IMPORTANT!  
Be sure to disconnect the microphone from the keyboard  
whenever you are not using it.  
1 Press the KEY LIGHT button to toggle the key light  
system on and off.  
The KEY LIGHT indicator disappears when the key  
Howling (Feedback Noise)  
light system is turned off.  
Any of the following conditions can cause howling (feedback  
noise).  
Covering the head of the microphone with your hand  
Positioning the microphone too near to a speaker  
Should howling occur, try grasping the microphone further  
away from the head, and move away from any nearby  
speaker.  
NOTE  
The key light system is turned on automatically whenever  
you turn on keyboard power.  
Static Noise  
Fluorescent lighting can cause static noise in the microphone  
signal. When this happens, move away from the lighting you  
suspect may be causing the static.  
663A-E-019A  
E-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a Built-in Tune  
REW  
REPEAT  
PIANO BANK  
SONG BANK  
TONE  
[+] / []  
Number buttons  
FF  
TEMPO  
PAUSE  
PLAY/STOP  
Your keyboard comes with a total of built-in 100 tunes. You  
can play back built-in tunes for your own listening pleasure,  
or you can use them for practice and even sing-along. Built-  
in tunes are divided between the two groups described below.  
3 Use the number buttons to input the tunes two-  
digit number.  
Example: To select 54 ALOHA OE, input 5 and then 4.  
Song number  
Song name  
Song Bank Group: 65 tunes  
The tunes in this group are Auto Accompaniment tunes.  
Piano Bank Group: 35 tunes  
The piano tunes in this group are subdivided between 10  
etudes and 25 concert pieces.  
A l o h a  
O
e
In addition to the built-in tunes, you can also play back the  
tunes you download over the Internet (page E-35).  
NOTE  
Tune Number 00 is the initial default Song Bank tune  
setting whenever you turn on keyboard power.  
You can also increment the displayed tune number by  
pressing [+] and decrement is by pressing [].  
To play back a Song Bank tune  
PREPARATION  
Adjust the main volume (page E-16).  
4 Press the PLAY/STOP button to start play of the tune.  
Staff display  
1 Find the tune you want to play in the SONG BANK  
List, and note its number.  
See page A-7 for the SONG BANK List.  
A l o h a  
O
e
2 Press the SONG BANK button to enter the Song  
Bank Mode.  
Fingering  
Chord name  
5 Press the PLAY/STOP button to stop playback of  
Indicator appears  
the Song Bank tune.  
The tune you select continues to play until you stop  
it.  
E-18  
663A-E-020A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a Built-in Tune  
To play back a Piano Bank tune  
Musical Information System  
When the keyboard is playing one of its built-in tunes, the  
display shows a variety of information about the tune.  
1 Find the tune you want to play in the PIANO BANK  
List, and note its number.  
Example: Display during Song Bank play  
See page A-7 for the PIANO BANK List.  
Staff display  
2 Press the PIANO BANK button to specify the Piano  
Bank group.  
A l o h a  
O
e
Fingering  
Chord name  
Indicator appears  
NOTE  
NOTE  
Chord names are not displayed for Piano Bank tunes.  
Pressing the PIANO BANK button changes the tone to  
STEREO PIANO (Tone Number 000).  
Adjusting the Tempo  
3 Use the number buttons to input the two-digit tune  
The tempo (beats per minute) can be set to a value in the  
range of 30 to 255. The tempo value you set is used for Song  
Bank, Piano Bank, 3-step lesson, and Auto Accompaniment  
chord play, as well as playback from memory card and  
metronome operation.  
number you looked up in step 1.  
Example: To select tune number 07 (ODE TO JOY), input  
0 and then 7.  
y
O d e T o J o  
To set the tempo  
1 Use the TEMPO buttons to set the tempo.  
: Increases the tempo value.  
NOTE  
Tune Number 00 is the initial default Piano Bank tune  
setting whenever you turn on keyboard power.  
You can also change the displayed tune number using  
the [+] and [] buttons.  
: Decreases the tempo value.  
Flash  
4 Press the PLAY/STOP button to start playback.  
Tempo value  
5 To stop playback, press the PLAY/STOP button.  
NOTE  
The tune you select continues to play until you stop  
While the tempo value is flashing, you can also use the  
number buttons or [+] and [] to input a three-digit value.  
Note that you must input leading zeros, so 90 is input  
as 090.  
it.  
Pressing both the and TEMPO buttons at the same  
time automatically returns the currently selected rhythm  
to its default tempo.  
Piano Bank tunes have tempo changes part way through  
in order to produce specific musical effects.  
663A-E-021A  
E-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a Built-in Tune  
To pause playback  
To fast forward  
1 Press the PAUSE button while a tune is playing to  
1 While a tune is playing or paused, hold down the  
pause it.  
FF button to skip forward at high speed.  
The fast forward operation skips forward one measure  
at a time.  
2 Pressing the PAUSE button again resumes play from  
The measure and beat numbers on the display change  
while the fast forward operation is being performed.  
the point where it was paused.  
To fast reverse  
1 While a tune is playing or paused, hold down the  
Measure number  
Beat number  
REW button to skip in a reverse direction at high  
speed.  
2 Releasing the FF button starts song playback from  
The fast reverse operation skips back one measure at  
a time.  
the measure whose number is shown on the display.  
The measure and beat numbers on the display change  
while the fast reverse operation is being performed.  
NOTE  
Fast forward does not work while tune play is stopped.  
Measure number  
Beat number  
Looping a Musical Phrase  
You can select one or more measures and loopthem, which  
means that they play again and again until you stop playback.  
2 Releasing the REW button starts song playback from  
the measure whose number is shown on the display.  
1 While the tune is playing, press the REPEAT button  
while the measure you want to start from is playing.  
This causes the repeat indicator to flash on the display,  
and displays the measure number of the start  
measure.  
NOTE  
Fast reverse does not work while tune play is stopped.  
Certain playback conditions can cause it to take some  
time before fast reverse starts after you press the REW  
button.  
2 When playback is within the measure you want to  
specify as the end of the loop, press the REPEAT  
button again.  
This displays the measure number of the end measure,  
and starts repeat play of the loop.  
To cancel repeat play of a loop, press the REPEAT  
button again so the repeat indicator is not displayed.  
E-20  
663A-E-022A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a Built-in Tune  
To change the melody tone  
Using the PIANO BANK Button  
Pressing the PIANO BANK button provides instant access to  
piano tones and piano tune selection.  
1 Press the TONE button.  
Initial Piano Bank Setting  
Tone: 000 STEREO PIANO  
To use the piano bank  
1 Press the PIANO BANK button.  
Indicator appears  
2 Find the tone you want in the TONE List, and then  
use the number buttons to input its three-digit  
number.  
Example: To select 057 VIOLIN, input 0, then 5, then  
7.  
Indicator appears  
You can select any one of the keyboards 264 built-in  
tones.  
2 Now try playing something on the keyboard.  
The notes you play sound with a piano tone.  
V i o l i  
n
3 If you want to playback the built-in tune, press the  
PLAY/STOP button.  
NOTE  
This causes the currently selected tune to play in an  
endless loop.  
To stop playback, press the PLAY/STOP button again.  
You can also use the [+] and [] buttons to change the  
melody tones.  
For two-hand tunes (Piano Bank tunes), the same tone  
is applied for both the left and right hand parts.  
Specifying the tune number for the same tune that is  
currently selected returns the melody tone to the default  
setting for that tune.  
Using the SMF Data on the  
Bundled CD-ROM  
The CD-ROM that comes bundled with the keyboard contains  
demos as well as 25 tunes (SMF data) that you can use for  
step lessons. It also contains PDF format files that contain  
To play all tunes in succession  
the  
sheet  
music  
of  
the  
included  
tunes.  
For a full list of the tunes that are included, open the List.txt”  
file located inside the MusicDataFolderon the CD-ROM.  
For each tune, List.txtshows the tune name, SMF file name,  
PDF file name of the music score, and the type of lesson* for  
which the tune can be used.  
1 Press the SONG BANK button and PIANO BANK  
button at the same time.  
Playback starts from Song Bank tune number 00,  
followed in sequence by Piano Bank tunes.  
* A tune marked with an asterisk (*) can be used for a both-  
hand lesson. A tune that is not marked with an asterisk can  
be used for a right-hand lesson.  
2 To stop tune play, press the PLAY/STOP button.  
NOTE  
NOTE  
While a tune is playing, you can use the number buttons  
or [+] and [] to change to another tune.  
You can play along with the tunes on the keyboard.  
You can load SMF data from the CD-ROM to the  
keyboard using an SD memory card (page E-40) or using  
the SMF converter tool (page E-35).  
You will need to have Adobe Reader or Acrobat Reader  
installed on your computer in order to view the contents  
of a music score PDF file. If neither of these applications  
is installed on your computer, see Installing Adobe  
Reader (Acrobat Reader**)on page E-34.  
663A-E-023A  
E-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-Step Lesson  
PIANO BANK  
SONG BANK  
[+] / []  
Number buttons  
METRONOME  
SPEAK  
STEP 1  
STEP 2  
STEP 3  
RIGHT  
LEFT  
SCORING  
TEMPO  
PLAY/STOP  
With the 3-Step Lesson System, you can practice built-in tunes  
and SMF data from a memory card, and even plot your  
progress according to the evaluation points the keyboard  
awards you.  
Lesson Parts  
3-Step Lesson lets you practice the right-hand part, left-hand  
part, or the parts for both hands.  
* See Using a Memory Cardon page E-38 for information  
about using the SMF data from a memory card for playback.  
Key Lighting System Operation and  
Display Contents During 3-step  
Lesson Play  
Lesson Progress  
Whenever you select an Auto Accompaniment tune for 3-step  
lesson play, the key lighting system shows you which keys  
to press, while the display shows you the notes and their  
fingerings.  
Step 1  
Step 2  
Step 3  
Evaluation  
Targeted Practice  
Note Pitch  
The keyboard key that should be pressed lights, while the  
actual pitch of the note appears in the displays staff notation  
area. The fingers you should use to play the notes are also  
shown on the display.  
3-Step Lesson  
The 3-step lesson feature takes you through the three distinct  
steps described below to help you learn to play tunes on the  
keyboard.  
Note Length  
Keyboard keys stay lit for as long as the note should be  
played. The staff notation and fingerings also remain on the  
display for the length of the note.  
Step 1 – Master the timing.  
In this step, pressing any key on the keyboard plays the  
correct note, so you can concentrate on getting the timing  
right without worrying about playing the right note.  
Accompaniment (left-hand part) waits until you press a key  
before proceeding to the next phrase.  
Next Note  
The keyboard key for the next note to be played flashes, while  
a number appears on the display near the finger you should  
use to play the next note.  
Series of Same Pitch Notes  
Step 2 – Master the notes.  
The keyboard key light turns off momentarily between the  
notes and lights again for each successive note. The staff  
notation and fingerings also turn off and back on again.  
In this step, you use the display to learn which fingers you  
should use and how loud or soft to play, and the key light  
system to learn which keyboard keys to press.  
Accompaniment (left-hand part) waits until your play the  
correct note, so you can learn at your own pace.  
Step 3 – Play at normal speed.  
This is where you enjoy actually playing the tunes you learn  
using Step 1 and Step 2. The key light system still shows you  
which keyboard keys to press, but accompaniment proceeds  
at normal speed regardless of whether or not you play the  
correct notes.  
E-22  
663A-E-024A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-Step Lesson  
Evaluation Mode  
Example: When play requires pressing keys with fingers 3, 2,  
and then 1  
The keyboards Evaluation Mode awards points to your  
performances during Step 3 of the 3-Step Lesson. A perfect  
score is 100. Also, the Evaluation Mode provides comments  
about your play on the monitor screen.  
1st Note  
2nd Note  
3rd Note  
Next note  
Current note  
Evaluation Mode Display  
Lit  
Lit  
Flash  
Flash  
Lit  
Flash  
Level Indicator (9 Levels): This indicator shows the evaluation  
of your current performance at a glance. The more segments  
that appear, the higher your points.  
Key light  
Example: 50 points  
NOTE  
Note length is not indicated when you are using two-  
hand tunes with 3-step lesson Steps 1 and 2. As soon  
as you press a lit key, it goes out and the next key to be  
played starts to flash.  
Note length is indicated by the key light system when  
you use a two-hand tune with Step 3. In this case, the  
next key to be pressed does not flash when you press a  
lit key and the next finger number does not appear on  
the display. Only the current finger number is shown.  
Timing Indicator: In the Evaluation Mode, the configuration  
of the star changes with each note to let  
you know how your timing is. The more  
stars, the better your timing.  
Evaluation Results  
3-step Lesson Tempo Setting  
Use the procedure under Adjusting the Tempoon page  
E-19 to adjust the tempo for 3-step lesson play.  
After you finish playing, the keyboard calculates an  
evaluation of your total performance, from beginning to end,  
and displays your total score on the monitor screen. The  
greater the score, the higher your evaluation is.  
Evaluation Rank Display Messages  
Dynamic Marks  
The dynamic marks listed below appear on the display while  
tunes are playing. Adjust the pressure you apply to the  
keyboard in accordance with the mark that is on the display.  
Display Message  
Bravo!”  
Great!”  
<High>  
Evaluation Ranges  
<Low>  
pianissimo: Very soft  
piano: Soft  
Not bad!”  
Again!”  
mezzo piano: Moderately soft  
mezzo forte: Moderately loud  
forte: Loud  
****: indicates that the Evaluation Mode was exited  
before an evaluation result could be obtained.  
fortissimo: Very loud  
NOTE  
(
<) crescendo: Gradually louder  
( ) decrescendo: Gradually softer  
cresc.  
If you press the PLAY/STOP button and interrupt the  
Evaluation Mode part way through, the monitor screen  
shows the evaluation points you have accumulated up  
to that point. In this case, the keyboard does not display  
a message.  
>
decresc.  
663A-E-025A  
E-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-Step Lesson  
4 Press any keyboard keys to play the notes.  
Using the Lesson Functions and  
Evaluation Mode  
Perform the following steps to master your favorite tunes.  
Step 1 – Master the timing.  
The key for the next note to be played flashes while  
the keyboard waits for you to play it. When you press  
any key to play the note, the key remains lit as the  
note plays.  
Accompaniment (left-hand part) waits until you press  
any key to play a note.  
If you accidentally press more than one key in  
succession, accompaniment is played for the  
corresponding number of notes.  
Pressing more than one key at the same time counts  
as a single note. Pressing a key while another key is  
held down is counted as two notes.  
1 Select the tune you want to use.  
2 Press the RIGHT button or the LEFT button to  
specify the part you want to practice.  
If you want to practice both hands, press both buttons  
at the same time.  
Indicators appear around the hand on the display  
whose part is selected for practice.  
5 To stop play at any time, press the PLAY/STOP  
button.  
Indicators  
Step 2 – Master the notes.  
3 Press the STEP 1 button to start Step 1 play.  
After a count sounds, they keyboard stands by and  
waits for you to play the first note of the tune.  
Voice fingering guide will use a simulated human  
voice to call out fingering numbers during one-hand  
part practice. See Voice Fingering Guideon page  
E-26 for details.  
1 Select the tune you want to use.  
2 Press the RIGHT button or the LEFT button to  
specify the part you want to practice.  
If you want to practice both hands, press both buttons  
at the same time.  
Note pitch Fingering  
3 Press the STEP 2 button to start Step 2 play.  
After a count sounds, the keyboard stands by and  
waits for you to play the first note of the tune.  
Voice fingering guide will use a simulated human  
voice to call out fingering numbers during one-hand  
part practice. See Voice Fingering Guideon page  
E-26 for details.  
A l o h a  
O
e
Fingering  
Indicator appears  
A l o h a  
O
e
Indicator appears  
E-24  
663A-E-026A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-Step Lesson  
4 Follow the key light system to press the correct  
4 Follow the key light system to press the correct  
keyboard keys and play the notes.  
keyboard keys and play the notes.  
The key for the next note to be played flashes while  
the keyboard waits for you to play it. When you press  
any key to play the note, the key remains lit as the  
note plays.  
5 To stop play at any time, press the PLAY/STOP  
button.  
If multiple keys light on the on-screen keyboard guide  
when you are using a two-hand tune, it means that  
you must press all of the keys that are lit.  
Evaluation: Find out how the  
keyboard evaluates your Step 3 play.  
Use the SCORING button to check the evaluation of your  
play in Step 3.  
5 To stop play at any time, press the PLAY/STOP  
button.  
1 Press the SCORING button.  
This causes the SCORING indicator to appear on the  
display.  
Step 3 – Play at normal speed.  
A count beat sounds and then evaluation mode starts.  
1 Select the tune you want to play.  
2 Press the RIGHT button or the LEFT button to  
specify the part you want to practice.  
If you want to practice both hands, press both buttons  
at the same time.  
3 Press the STEP 3 button to start Step 3 play.  
Accompaniment (left hand part) starts to play at  
normal speed.  
Indicator appears  
2 Play in accordance with the guidance on the  
Fingering  
monitor screen.  
To stop evaluation, press the PLAY/STOP button. This  
displays only the points accumulated up to that point.  
A l o h a  
O
e
3 After you finished playing, your evaluation result  
appears on the display.  
For information about evaluation ranks, see  
Evaluation Resultson page E-23.  
Pressing the SONG BANK button or PIANO BANK  
button returns to the tune selection screen.  
Indicator appears  
B r a v o !  
663A-E-027A  
E-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-Step Lesson  
Voice Fingering Guide  
Using the Metronome  
Voice fingering guide uses a simulated human voice to call  
out fingering numbers during Step 1 and Step 2 one-hand  
part practice. If you need to press a key with your thumb, for  
example, voice fingering guide says, One!In the case of a  
chord to be played with your thumb, middle and little finger,  
voice fingering guide says, One, three, five!”  
The metronome feature of this keyboard produces a bell  
sound for the first beat of each measure, followed by click  
sounds for each successive beat of the measure. It is the perfect  
tool for practicing tunes without accompaniment (rhythm).  
To start the metronome  
Voice Fingering Guide calls out fingerings only when you do  
not press the proper key when you should.  
1 Press the METRONOME button to start sounding  
Voice Fingering Guide  
the metronome.  
One : Thumb  
This causes Beatto appear on the display. Perform  
step 2 within five seconds after Beatappears.  
Two : Forefinger  
Three : Middle finger  
Four : Ring finger  
Five : Little finger  
To turn voice fingering guide on or off  
Press the SPEAK button to toggle voice fingering guide on  
(voice fingering guide indicator displayed) and off (indicator  
not displayed).  
2 Use the number buttons or [+] and [] to change  
the number of beats per measure.  
You can specify 0, or a value from 2 to 6 as the number  
of beats per measure.  
Indicator  
appears  
B e a t  
NOTE  
NOTE  
Note that Voice Fingering is disabled in the Evaluation  
Mode.  
The bell (indicating the first beat of a measure) does not  
sound while one beat per measure is specified. All beats  
are indicated by a click sound. This setting lets you  
practice with a steady beat, without worrying about how  
many beats there are in each measure.  
Exiting the Evaluation Mode automatically restores the  
Voice Fingering setting that was in effect when you  
entered the Evaluation Mode.  
3 Use the TEMPO buttons to set the tempo.  
Press to increase the tempo (make if faster) or to  
decrease it (make it slower).  
Flash  
Tempo value  
NOTE  
While the tempo value is flashing, you can also use the  
number buttons or [+] and [] to input a three-digit value.  
Note that you must input leading zeros, so 90 is input  
as 090.  
Pressing both the and TEMPO buttons at the same  
time automatically returns the currently selected rhythm  
or tune to its default tempo.  
4 To turn off the metronome, press the METRONOME  
button.  
E-26  
663A-E-028A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Accompaniment  
MAIN VOLUME  
POWER/MODE  
START/STOP  
RHYTHM  
[+] / []  
Number buttons  
INTRO  
NORMAL/FILL-IN  
SYNCHRO/ENDING  
VARIATION/FILL-IN  
This keyboard automatically plays bass and chord parts in  
accordance with the chords you finger. The bass and chord  
parts are played using sounds and tones that are  
automatically selected to select the rhythm you are using.  
All of this means that you get full, realistic accompaniments  
for the melody notes you play with your right hand, creating  
the mood of an one-person ensemble.  
Selecting a Rhythm  
This keyboard provides you with 120 exciting rhythms that  
you can select using the following procedure.  
To select a rhythm  
1 Find the rhythm you want to use in the RHYTHM  
List and note its rhythm number.  
Not all of the available rhythms are shown on the  
rhythm list printed on the keyboard console. For a  
complete list, see the Rhythm Liston page A-6.  
2 Press the RHYTHM button.  
p
P o  
1
Indicator appears  
3 Use the number buttons to input the three digit  
rhythm number for the rhythm you want to select.  
Example: To select 075 RHUMBA, input 0, 7 and then  
5.  
R h u m b  
a
NOTE  
You can also increment the displayed rhythm number  
by pressing [+] and decrement it by pressing [].  
Some rhythms consist of chord accompaniments only,  
without any drums or other percussion instruments. Such  
rhythms do not sound unless CASIO CHORD or  
FINGERED is selected as the accompaniment mode.  
663A-E-029A  
E-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Accompaniment  
4 To stop Auto Accompaniment play, press the START/  
Playing a Rhythm  
Use the following procedure to start and stop rhythm play.  
STOP button again.  
NOTE  
To play a rhythm  
If you press the SYNCHRO/ENDING button and then  
the INTRO button in place of the START/STOP button  
in step 2, accompaniment will start with an intro pattern  
when you perform the operation in step 3. For details  
about these buttons, see pages E-30 and E-31.  
If you press the SYNCHRO/ENDING button in place of  
the START/STOP button in step 4, an ending pattern  
will play before accompaniment play is ended. For details  
about this button, see page E-31.  
You can adjust the accompaniment part volume level  
independently of the main volume. For details, see  
Adjusting Accompaniment and Song Bank Volumeon  
page E-32.  
1 Set the POWER/MODE switch to NORMAL.  
2 Press the START/STOP button to start play of the  
currently selected rhythm.  
3 To stop rhythm play, press the START/STOP button  
again.  
NOTE  
All of the keyboard keys are melody keys while the  
POWER/MODE switch is set to NORMAL.  
CASIO CHORD  
Using Auto Accompaniment  
This method of chord play makes it possible for anyone to  
easily play chords, regardless of previous musical knowledge  
and experience. The following describes the CASIO CHORD  
Accompaniment keyboardand Melody keyboard, and  
tells you how to play CASIO CHORDs.  
The following procedure describes how to use the keyboards  
Auto Accompaniment feature. Before starting, you should  
first select the rhythm you want to use and set the tempo of  
the rhythm to the value you want.  
CASIO CHORD Accompaniment Keyboard and Melody  
Keyboard  
To use Auto Accompaniment  
Accompaniment  
Melody keyboard  
keyboard  
1 Set the POWER/MODE switch to CASIO CHORD  
or FINGERED.  
2 Press the START/STOP button to start play of the  
currently selected rhythm.  
NOTE  
The accompaniment keyboard can be used for playing  
chords only. No sound will be produced if you try playing  
single melody notes on the accompaniment keyboard.  
3 Play a chord.  
The actual procedure you should use to play a chord  
depends on the current POWER/MODE switch  
position. Refer to the following pages for details on  
chord play.  
CASIO CHORD .......................... Page E-28  
FINGERED ................................... Page E-29  
R h u m b  
a
Chord name  
E-28  
663A-E-030A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Accompaniment  
Chord Types  
FINGERED  
CASIO CHORD accompaniment lets you play four types of  
chords with minimal fingering.  
FINGERED provides you with a total of 15 different chord  
types. The following describes the FINGERED  
Accompaniment keyboardand Melody keyboard, and  
tells you how to play a C-root chord using FINGERED.  
Chord Types  
Example  
Major chords  
C Major (C)  
Major chord names are marked above  
the keys of the accompaniment  
keyboard. Note that the chord  
produced when you press an  
accompaniment keyboard does not  
change octave, regardless of which  
key you use to play it.  
CDE F GABCDE F  
FINGERED Accompaniment Keyboard and Melody  
Keyboard  
Accompaniment  
Melody keyboard  
keyboard  
Minor chords (m)  
C minor (Cm)  
To play a minor chord, keep the major  
chord key depressed and press any  
other accompaniment keyboard key  
located to the right of the major chord  
key.  
CDE F GABCDE F  
NOTE  
The accompaniment keyboard can be used for playing  
chords only. No sound will be produced if you try playing  
single melody notes on the accompaniment keyboard.  
Seventh chords (7)  
C seventh (C7)  
To play a seventh chord, keep the  
major chord key depressed and press  
any other two accompaniment  
keyboard keys located to the right of  
the major chord key.  
CDE F GABCDE F  
C
Cm  
Cdim  
Minor seventh chords (m7)  
C minor seventh (Cm7)  
To play a minor seventh chord, keep  
the major chord key depressed and  
press any other three accompaniment  
keyboard keys located to the right of  
the major chord key.  
CDE F GABCDE F  
Caug*1  
Cm7*2  
C75 *1  
Cmadd9*2  
Csus4  
Cmaj7*2  
C7sus4  
CmM7*2  
C7*2  
Cm75  
Cadd9*2  
Cdim7*1  
NOTE  
It makes no difference whether you press black or white  
keys to the right of a major chord key when playing minor  
and seventh chords.  
See the FINGERED Chord Chart on page A-5 for details on  
playing chords with other roots.  
*1: Inverted fingerings cannot be used. The lowest note is  
the root.  
*2: The same chord can be played without pressing the 5th  
G.  
663A-E-031A  
E-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Accompaniment  
NOTE  
Using a Fill-in Pattern  
Fill-in patterns let you momentarily change the rhythm  
pattern to add some interesting variation to your  
performances.  
Except for the chords specified in note*1 above, inverted  
fingerings (i.e. playing E-G-C or G-C-E instead of C-E-  
G) will produce the same chords as the standard  
fingering.  
Except for the exception specified in note*2 above, all  
of the keys that make up a chord must be pressed.  
Failure to press even a single key will not play the desired  
FINGERED chord.  
The following procedure describes how to use the Fill-in  
feature.  
To insert a fill-in  
1 Press the START/STOP button to start rhythm play.  
Using an Intro Pattern  
This keyboard lets you insert a short intro into a rhythm  
pattern to make startup smoother and more natural.  
2 Press the NORMAL/FILL-IN button to insert a fill-  
in pattern for the rhythm you are using.  
The following procedure describes how to use the Intro  
feature. Before starting, you should first select the rhythm  
you want to use, and set the tempo.  
NOTE  
The fill-in pattern does not play if you press the  
NORMAL/FILL-IN button while an intro pattern is playing.  
To insert an intro  
Using a Rhythm Variation  
In addition to the standard rhythm pattern, you can also  
switch to a secondary variationrhythm pattern for a bit of  
variety.  
1 Press the INTRO button to start the selected rhythm  
with an intro pattern.  
With the above setup, the intro pattern is played and  
the auto accompaniment with intro pattern starts as  
soon as you play chords on the accompaniment  
keyboard.  
To insert the variation rhythm pattern  
NOTE  
1 Press the START/STOP button to start rhythm play.  
The standard rhythm pattern starts to play after the intro  
pattern is complete.  
Pressing the VARIATION/FILL-IN button while an intro  
pattern is playing causes the variation pattern to sound  
after the intro pattern is complete.  
2 Press the VARIATION/FILL-IN button to switch to  
the variation pattern for the rhythm you are using.  
NOTE  
To switch back to the standard rhythm pattern, press  
the NORMAL/FILL-IN button.  
E-30  
663A-E-032A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Accompaniment  
Using a Fill-in Pattern with a  
Variation Rhythm  
You can also insert a fill-in pattern while a variation rhythm  
pattern is playing.  
Finishing with an Ending Pattern  
You can end your performances with an ending pattern that  
brings the rhythm pattern you are using to a natural-sounding  
conclusion.  
The following procedure describes how to insert an ending  
pattern. Note that the actual ending pattern played depends  
on the rhythm pattern you are using.  
To insert a fill-in into a rhythm variation  
1 While a variation rhythm pattern is playing, press  
the VARIATION/FILL-IN button to insert a fill-in  
pattern for the variation rhythm you are using.  
To finish with an ending pattern  
1 While the rhythm is playing, press the SYNCHRO/  
ENDING button.  
This causes the ending pattern to play, which brings  
rhythm accompaniment to an end.  
Synchro Starting Accompaniment  
with Rhythm Play  
You can set up the keyboard to start rhythm play at the same  
time you play the accompaniment on the keyboard.  
NOTE  
The timing when the ending pattern starts depends on  
when you press the SYNCHRO/ENDING button. If you  
press the button before the second beat of the current  
measure, the ending pattern starts playing immediately.  
Pressing the button at any point in the measure after  
the second beat results in the ending pattern playing  
from the beginning of the following measure.  
The following procedure describes how to use synchro start.  
Before starting, you should first select the rhythm you want  
to use, set the tempo, and use the POWER/MODE switch to  
select the chord play method you want to use (NORMAL,  
CASIO CHORD, FINGERED).  
To use synchro start  
1 Press the SYNCHRO/ENDING button to put the  
keyboard into synchro start standby.  
Flash  
2 Playing a chord and the rhythm pattern starts to  
play automatically.  
NOTE  
If the POWER/MODE switch is set to NORMAL, only  
the rhythm plays (without a chord) when you play on the  
accompaniment keyboard.  
If you press the INTRO button before playing anything  
on the keyboard, the rhythm starts automatically with  
an intro pattern when you play something on the  
accompaniment keyboard.  
Pressing the VARIATION/FILL-IN button before playing  
anything on the keyboard causes play to start with the  
variation pattern when something is played on the  
keyboard.  
To cancel synchro start standby, press the SYNCHRO/  
ENDING button one more time.  
663A-E-033A  
E-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Keyboard Settings  
FUNCTION  
[+] / []  
Number buttons  
About FUNCTION button  
To adjust built-in tune volume  
Each press of the FUNCTION button cycles through the  
setting screens. If you accidentally pass the screen you want  
to use, keep pressing the FUNCTION button until the screen  
appears again.  
Enter the Song Bank mode or Piano Bank mode, and then  
perform the procedure under To adjust the accompaniment  
volume.  
In this case, a song volume screen will appear in place of  
the accompaniment volume screen.  
Adjusting Accompaniment and  
Song Bank Volume  
You can adjust the volume of the accompaniment and Song  
Bank tunes independently of the notes you play on the  
keyboard. You can specify a volume level in the range of 000  
(minimum) to 127 (maximum).  
NOTE  
Pressing [+] and [] buttons at the same time  
automatically sets an accompaniment volume of 127.  
To adjust volume for playback of SMF  
data from a memory card  
Load a memory card into the card slot, and then perform the  
procedure under To adjust the accompaniment volume.  
In this case, a song volume screen will appear in place of  
the accompaniment volume screen.  
To adjust the accompaniment volume  
1 Press the FUNCTION button until the  
accompaniment volume adjustment screen  
appears.  
p
A c o m V o  
l
Current accompaniment volume setting  
2 Use the number buttons or the [+]/[] buttons to  
change the current volume setting value.  
Example: 110  
p
A c o m V o  
l
NOTE  
The current accompaniment volume value that appears  
in Step 1 automatically clears from the display if you do  
not input anything within about five seconds.  
Pressing [+] and [] buttons at the same time  
automatically sets an accompaniment volume of 115.  
E-32  
663A-E-034A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Keyboard Settings  
Transposing the Keyboard  
Tuning the Keyboard  
Use the following procedure to fine tune the keyboard to  
match the tuning of another musical instrument.  
Transpose lets you raise and lower the overall key of the  
keyboard in semitone units. If you want to play an  
accompaniment for a vocalist who sings in a key thats  
different from the keyboard, for example, simply use  
transpose to change the key of the keyboard.  
To tune the keyboard  
1 Press the FUNCTION button until the tuning screen  
To transpose the keyboard  
appears.  
1 Press the FUNCTION button until the transpose  
screen appears on the display.  
T u n e  
2 Use [+] and [] to change the transpose setting of  
the keyboard.  
2 Use the [+], [], and the number buttons to adjust  
Example: To transpose the keyboard five semitones  
the tuning value.  
upwards  
.
Example: To lower tuning by 20  
T r a n s .  
T u n e  
NOTE  
The keyboard can be transposed within a range of 12  
to +12.  
The default transpose setting is 00when keyboard  
power is turned on.  
If you leave the transpose screen on the display for about  
five seconds without doing anything, the screen is  
automatically cleared.  
The transpose setting also affects playback from Auto  
Accompaniment.  
NOTE  
The keyboard can be tuned within a range of 50 cents  
to +50 cents.  
* 100 cents is equivalent to one semitone.  
The default tuning setting is 00when keyboard power  
is turned on.  
If you leave the tuning screen on the display for about  
five seconds without doing anything, the screen is  
automatically cleared.  
To return the keyboard to its default key, perform the  
above procedure and press the [+] and [] buttons at  
the same time in step 2.  
The effect of a transpose operation depends on the pitch  
of each note and on the tone you are currently using. If  
a transpose operation causes a note to be outside of  
the allowable range for a tone, the same note in the  
nearest octave within the range will be substituted.  
The tuning setting also affects playback from Auto  
Accompaniment.  
To return the keyboard to its default tuning, perform the  
above procedure and press the [+] and [] buttons at  
the same time in step 2.  
663A-E-035A  
E-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection to a Computer  
FUNCTION  
[+] / []  
Number buttons  
LEFT  
RIGHT  
Minimum Computer system Requirements  
Connecting to a Computer  
Supported Operating Systems  
The keyboards USB port makes it quick and simple to connect  
to a computer. After installing the USB MIDI driver onto your  
computer from the CD-ROM that comes with the keyboard,  
you will be able to use commercially available MIDI software  
on your computer to exchange data between the keyboard  
and your computer.  
Operation is supported under Windows® XP, Windows® 2000,  
Windows® Me, Windows® 98SE, and Windows® 98.  
G Universal  
IBM AT or compatible computer  
USB port that provides normal operation under Windows  
CD-ROM drive (for installation)  
At least 2MB of free hard disk space (not including space  
required for Adobe Reader)  
To install the USB MIDI driver  
1 On the computer to which you plan to connect,  
G Windows XP  
300MHz or higher Pentium processor  
At least 128MB of memory  
install the USB MIDI driver that comes on the CD-  
ROM that comes bundled with the keyboard.  
For information about installing the USB MIDI driver,  
see the CASIO USB MIDI Driver Users Guide”  
(manual_e.pdf) on the USB Manual and Driver CD-  
ROM.  
G Windows 2000  
166MHz or higher Pentium processor  
At least 64MB of memory  
NOTE  
G Windows Me, Windows 98SE, Windows 98  
Before starting actual installation of USB MIDI driver,  
be sure to read the contents of the readme.txtfile in  
the Englishfolder on the CD-ROM.  
166MHz or higher Pentium processor  
At least 32MB of memory  
Driver Signing  
Use Adobe Reader or Acrobat Reader to access the USB  
MIDI driver users guide.*  
G Windows XP  
1 Log on to Windows XP using a Computer  
administrator account. See the documentation that  
comes with Windows XP for information about  
Computer administrator accounts.  
* You need to have Adobe Reader or Acrobat Reader installed on  
your computer in order to view the contents of the “CASIO USB  
MIDI Driver User’s Guide” (manual_e.pdf). If your computer  
does not have either Adobe Reader or Acrobat Reader installed,  
use the procedure below to install it.  
2 On the Windows [Start] menu, click [Control  
Installing Adobe Reader (Acrobat Reader**)  
Place the USB Manual and Driver CD-ROMinto your  
computers CD-ROM drive.  
On the CD-ROM, navigate to the folder named Adobe,  
open the folder named English, and then double-click  
ar601enu.exe(ar505enu.exe**). Follow the instructions  
that appear on your computer screen to install Adobe  
Reader.  
Panel].  
If you cannot see the [System] icon on the Control  
Panel, click [Switch to Classic View].  
3 Click the [System] icon. On the dialog box that  
appears, click the [Hardware] tab, and then click  
the [Driver Signing] button.  
** Adobe Reader cannot be installed on a computer running  
Windows 98. If your computer is running under Windows 98,  
double-click “ar505enu.exe” to install Acrobat Reader.  
4 On the dialog box that appears, select [Ignore], and  
then click [OK].  
E-34  
663A-E-036A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection to a Computer  
G Windows 2000  
Expanding the Selections in the  
Song Bank Tunes  
You can transfer song data from your computer to the  
keyboard. You can store up to 10 tunes (about 320 KB) as  
Song Bank tunes 65 through 74. For SMF data you purchase  
or create, you need to use an SMF Converter to convert it to  
CASIO format before transferring it to the keyboard.  
1 Log on using an Administrators group account. See  
the documentation that comes with Windows 2000  
for information about the Administrators group.  
2 On the Windows [Start] menu, point to [Settings]  
and then click [Control Panel].  
3 Click the [System] icon. On the dialog box that  
appears, click the [Hardware] tab, and then click  
the [Driver Signing] button.  
To install the SMF Converter  
1 On the computer to which you plan to connect,  
install the SMF Converter that comes on the CD-  
4 On the dialog box that appears, select [Ignore], and  
ROM that comes bundled with the keyboard.  
On the CD-ROM, double-click SMFConv-e.exe, and  
then follow the instructions that appear on your  
computer screen to install SMF Converter.  
then click [OK].  
NOTE  
Company and product names used herein are  
trademarks of their respective owners.  
* Before installing SMF Converter, be sure to read the contents of  
the “smfreadme.txt” file in each language folder on the CD-ROM.  
For information about using SMF Converter, double-click  
index.htmlin the [help] folder, which was created when  
you installed SMF Converter. You can also access user  
documentation from the Windows [Start] menu by clicking  
[Programs] - [CASIO] - [SMF Converter] - [manual].  
Using the USB port  
Note that you need to purchase a commercially available USB  
cable to connect the keyboard to a computer using the USB  
port. Once you establish a USB connection between the  
keyboard and a computer, you can exchange data between  
them.  
* A browser that supports frames (like Internet Explorer 4 or  
Netscape Navigator 4.04 or higher) is required to view the SMF  
Converter manual.  
Minimum Computer System Requirements  
To connect to a computer using the  
USB port  
* Operating System:  
Windows 98SE  
Windows Me  
Windows XP  
1 Use a commercially available USB cable to connect  
* Storage  
At least 10MB free HDD space  
the keyboard to the computer.  
* USB interface  
Computer  
USB port  
USB cable  
You can also obtain a copy of the SMF Converter by  
downloading it at the Web page shown below. After  
downloading, install the software on your computer.  
CASIO MUSIC SITE  
USB connector  
Keyboard USB port  
In addition to the software itself, the CASIO MUSIC SITE  
will also provide you with information about its installation  
and use. You can also find out about the latest news about  
your keyboard and other CASIO musical instruments, and  
much more.  
663A-E-037A  
E-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection to a Computer  
Song Data Storage  
NAVIGATE CHANNEL (Default: 4)  
Song data saved as Song Bank tunes are retained even when  
power is turned off, as long as the keyboard is being supplied  
battery or AC adaptor power. If you remove the batteries or  
should the batteries go dead while the keyboard is not being  
supplied power by the AC adaptor, song data will be deleted.  
Be sure to supply power to the keyboard with the AC adaptor  
when replacing batteries.  
When messages are received from a computer for play on  
this keyboard, the navigate channel is the channel whose note  
data appears on the display. You can select one channel from  
01 to 16 as the navigate channel. Since this setting lets you  
use the data on any channel of commercially available SMF  
data to light on the on-screen keyboard guide, you can  
analyze how different parts of an arrangement are played.  
NOTE  
1 Press the FUNCTION button until the NAVIGATE  
This keyboard supports SMF 0 and 1 format data.  
Voice Fingering Guide and on-screen fingering indicators  
are not supported for commercially available SMF data.  
CHANNEL screen appears.  
N a v i  
.
C
h
General MIDI Tone  
The General MIDI standard defines the tone numbering  
sequence, the drum sound numbering sequence, the number  
of MIDI channels that can be used, and other general factors  
that determine the sound source configuration. Because of  
this, musical data produced on a General MIDI sound source  
can be played back using similar tones and identical nuances  
as the original, even when played on another manufacturers  
sound source.  
2 Use the [+], [], and the number buttons [0] through  
[9] to change the channel number.  
Example: To specify channel 2  
N a v i  
.
C
h
This keyboard conforms with General MIDI standards, so it  
can be connected to a computer and used to play back General  
MIDI data that has been purchased, downloaded from the  
Internet, or obtained from any other source.  
To turn off specific sounds before playing back tune data  
that is being received  
<<Navigate channel on/off>>  
1 While playing tune data, press the RIGHT button.  
This cuts the sound of the navigate channel, but on-  
screen keyboard guide keys continue to light in  
accordance with the channels data as it is received.  
Press RIGHT button again to turn the channel back  
on.  
Changing the Settings  
This section tells you how to make the settings required when  
connecting to a computer.  
KEYBOARD CHANNEL (Default: 1)  
The keyboard channel is the channel used to send messages  
from this keyboard to a computer. You can specify one channel  
from 1 to 16 as the keyboard channel.  
<<Next lower channel from navigate channel on/off>>  
1 While playing tune data, press the LEFT button.  
This cuts the sound of the channel whose number is  
one less than the navigate channel, but on-screen  
keyboard guide keys continue to light in accordance  
with the channels data as it is received. Press LEFT  
button again to turn the channel back on.  
1 Press the FUNCTION button until the KEYBOARD  
CHANNEL screen appears.  
y
K e  
b
d
C
h
Example: If the navigate channel is channel 4, the above  
operation turns off channel 3.  
2 Use the [+], [], and the number buttons to change  
the channel number.  
Example: To specify channel 4  
y
K e  
b
d
C
h
E-36  
663A-E-038A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection to a Computer  
GM Mode Receive  
LOCAL CONTROL (Default: On)  
When GM off is received and the mode switch is set to a chord  
mode, the Auto Accompaniment chord is specified in  
accordance with the received message.  
oFF: Anything played on the keyboard is output as a message  
from the USB port, without being sounded by the  
internal sound source.  
When GM on is received, Auto Accompaniment chords  
cannot be specified by received messages.  
Note that no sound is produced by the keyboard if LOCAL  
CONTROL is turned off and no external device is  
connected.  
SUSTAIN/ASSIGNABLE JACK  
(Default: SUS)  
1 Press the FUNCTION button until the LOCAL  
SUS(sustain): Specifies a sustain*1 effect when the pedal is  
CONTROL screen appears.  
depressed.  
Example: When LOCAL CONTROL is on  
SoS (sostenuto): Specifies a sostenuto*2 effect when the  
pedal is depressed.  
L o c a  
l
SFt (soft): Specifies reduction of the sounds volume when  
the pedal is depressed.  
rHy (rhythm): Specifies START/STOP button operation  
2 Use the [+] and [] or [0] and [1] buttons to turn  
when the pedal is depressed.  
the setting on and off.  
Example: To turn LOCAL CONTROL off  
1 Press the FUNCTION button until the SUSTAIN/  
ASSIGNABLE JACK screen appears.  
L o c a  
l
Example: When sustain is currently set  
J a c k  
ACCOMP OUT (Default: Off)  
on: Auto Accompaniment is played by the keyboard and  
2 Use the [+] and [] or [0], [1], [2], and [3] buttons  
the corresponding message is output from the USB port.  
to change the setting.  
oFF: Auto Accompaniment messages are not output from the  
Example: To select rhythm  
USB port.  
J a c k  
1 Press the FUNCTION button until the ACCOMP  
OUT screen appears.  
Example: When ACCOMP OUT is off  
*1 Sustain  
With piano tones and other sounds that decay, the pedal acts  
as a damper pedal, with sounds being sustained longer when  
the pedal is depressed. With organ tones and other continuous  
sounds, notes played on the keyboard continue to sound until  
the pedal is released. In either case, the sustain effect is also  
applied to any notes that are played while the pedal is  
depressed.  
p
A c o m O u  
t
2 Use the [+] and [] or [0] and [1] buttons to turn  
the setting on and off.  
Example: To turn ACCOMP OUT on  
*2 Sostenuto  
This effect performs the same way as sustain, except that it is  
applied only to notes that are sounding already when the  
pedal is depressed. It does not affect notes that are played  
after the pedal is depressed.  
p
A c o m O u  
t
663A-E-039A  
E-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using a Memory Card  
FUNCTION  
CARD  
[+] / []  
Number buttons  
STEP 1  
STEP 2  
SCORING  
STEP 3  
SD CARD SLOT  
START/STOP  
Your keyboard is equipped with a card slot  
that supports use of memory cards  
(commercially available SD memory card  
Avoid storing and using memory cards in the following  
types of locations. Such conditions can cause corruption  
of data stored on the card.  
or optional CASIO song data card*). This makes it possible  
for the keyboard to directly read commercially available SMF  
data, which has been saved to a memory card from your  
computer, for listening pleasure and lessons. Memory card  
data can be used the same way as built-in tunes.  
Areas subject to high temperatures, high humidity, or  
corrosive agents  
Areas subject to strong electrostatic charge or  
electrical noise  
Whenever handling a memory card, make sure that you  
never touch its contacts with your fingers.  
If the data access lamp is lit and the message Pls Wait”  
is on the display, it means that data on the memory card  
is being accessed by a save, read, or delete operation.  
Never remove the memory card from the card slot or  
turn off the keyboard while the card is being accessed.  
Doing so can corrupt the data on the memory card or  
even damage the card slot.  
Never try to insert anything that is not an SD memory  
card or optional CASIO song data card* into the  
Keyboards memory card slot. Doing so can cause  
malfunction of the keyboard.  
G Supported Memory Cards:  
SD memory cards, optional CASIO song data cards*  
G Supported SD Cards:  
1 GB or less (Cards with capacity greater than 1 GB are  
not supported.)  
G Maximum Number of Importable Songs: Up to 1,000  
The actual number of songs that can be imported  
depends on the size of each file. The actual number will  
be less than 1,000 when individual song files are large.  
G Supported Data:  
Inserting a memory card that is charged with static  
electricity into the card slot can cause malfunction of  
the keyboard. If this happens, turn the keyboard off and  
then back on again.  
A memory card that has been in the card slot for a long  
time may feel hot when you remove it. This is normal  
and does not indicate malfunction.  
SMF Format 0, CASIO Original Format CM2  
IMPORTANT!  
Use only an SD memory card or an optional CASIO song  
data card* with this keyboard. Proper operation is not  
guaranteed when any other type of card is used.  
Note that a memory card has a limited service life. After  
long use, you may not be able to store data to, read  
data from, and/or delete data from a card. When this  
happens, you will need to purchase a new memory card.  
Memory Card and Card Slot  
Precautions  
IMPORTANT!  
* May not be available in some geographic areas.  
Be sure to carefully read all documentation that comes  
with the memory card for important information about  
how to handle it.  
SD memory cards have a write protect switch, which  
you can use to protect against accidental deletion of  
data. After saving important data to an SD memory card,  
be sure to use the write protect switch to protect the  
data against accidental changes or deletion.  
CASIO COMPUTER CO., LTD. assumes no responsibility  
for any loss or damage to you or any third party arising  
out of the loss or corruption of data.  
E-38  
663A-E-040A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using a Memory Card  
Inserting and Removing a Memory  
Card  
Getting Ready  
IMPORTANT!  
IMPORTANT!  
Make sure you turn off the keyboard before inserting or  
removing a memory card.  
Be sure to orient the card correctly when inserting it.  
Never try to force a memory card into the card slot when  
you feel resistance.  
Never remove the memory card from the card slot or  
turn off the keyboard while card data is being accessed  
by a read or format operation. Doing so can corrupt the  
data on the memory card or even damage the card slot.  
Before you can use an SD memory card with this  
keyboard, you need to perform the procedure below to  
format it. After formatting the card, transfer SMF data  
from your computer to the card.  
Formatting an SD memory card with this keyboard  
automatically creates a folder named MUSICDATon  
the card. When transferring SMF data from your  
computer to the card for use by the keyboard, be sure  
to store it in the MUSICDATfolder.  
Note that formatting a card that already contains data  
causes all of that data to be deleted. Data deleted by  
the format operation cannot be recovered. Before  
performing the procedure below, check to make sure  
that the media does not contain any data you might need.  
To insert a memory card into the card slot  
1 With the front side of the memory card facing  
upwards, carefully slide it into the card slot. Slide  
the card all the way in until you hear it click  
securely into place.  
PREPARATION  
Insert the SD memory card you want to format into the  
keyboards card slot. Make sure that the SD memory  
cards write protect is removed, which enables writing.  
To format an SD memory card  
1 Press the FUNCTION button a number of times until  
the card format setting screen appears.  
Front  
F o r m a t  
?
To remove a memory card from the card slot  
2 Press the [+] (YES) button.  
1 Press the memory card into the card slot and then  
release it. This will cause the card to come part  
way out of the keyboard.  
This will display a confirmation message asking  
whether you really want to format the media.  
3 Press the [+] (YES) button to start formatting.  
The message Pls Waitwill remain on the display to  
indicate that a procedure is being performed. Never  
try to perform any other operation on the keyboard  
while the card is being formatted. After formatting is  
complete, the keyboard returns to the mode you were  
in before you displayed the setting screen.  
2 Pull the memory card out of the card slot.  
To cancel the format operation, press the [] (NO)  
button. This returns to the card format setting screen.  
If an error message appears on the display, see  
Memory Card Error Messageson page E-41.  
Pressing the FUNCTION button while an error  
message is on the display returns to the card format  
setting screen.  
663A-E-041A  
E-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using a Memory Card  
I To evaluate your play using SMF Data  
Reading a Memory Card  
3-1 Press the SCORING button.  
1 Press the CARD button.  
The keyboard will read the SMF data and enter the  
Evaluation Mode.  
An error message will appear if the selected SMF  
data file is larger than about 320 KB.  
If an error message appears, see Memory Card  
Error Messageson the following page for  
information about what you need to do.  
The channel specified as the navigate channel is  
assigned to the right-hand part, while the channel  
that is one less than the channel specified as the  
navigate channel is assigned to the left-hand part.  
On-screen fingering indicators are not supported  
for SMF data.  
Indicator appears  
2 Use the number buttons to input the three-digit  
number that corresponds to the SMF data you want  
to select.  
4 Press the START/STOP button to stop SMF data play.  
3 Perform one of the following operations.  
I To play back SMF data  
3-1 Press the START/STOP button.  
The keyboard will read the SMF data and play it.  
I To use SMF data in a 3-Step Lesson  
3-1 Press the STEP 1, STEP 2, or STEP 3 button.  
The keyboard will read the SMF data and start a  
lesson at the step you selected.  
An error message will appear if the selected SMF  
data file is larger than about 320 KB.  
If an error message appears, see Memory Card  
Error Messageson the following page for  
information about what you need to do.  
The channel specified as the navigate channel is  
assigned to the right-hand part, while the channel  
that is one less than the channel specified as the  
navigate channel is assigned to the left-hand part.  
Voice Fingering Guide and on-screen fingering  
indicators, are not supported for SMF data.  
E-40  
663A-E-042A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using a Memory Card  
Memory Card Error Messages  
Display Message  
Cause  
Action  
Err No Card  
There is no memory card loaded in the keyboard  
or the memory card you are using is not loaded  
correctly.  
Load a memory card or correctly reinsert the  
memory card.  
..................................................................... page E-39  
Err No File  
(1) The memory card song data that is supported  
by the keyboard is not in the MUSICDAT folder.  
(2) The memory card does not have a MUSICDAT  
folder.  
(1) Move the files containing song data supported  
by the keyboard to the MUSICDAT folder.  
(2) Create a MUSICDAT folder and move the  
applicable files into the folder. Formatting the  
card will create  
automatically.  
a
MUSICDAT folder  
..................................................................... page E-39  
Err WrongDat  
Err SizeOver  
The data is damaged.  
Take the necessary steps to replace the damaged  
data with normal data.  
The file is too large to be played by this keyboard.  
The maximum supported file size is 320 KB. Select  
a smaller file.  
..................................................................... page E-40  
Err Protect  
Err Format  
The memory card is write-protected.  
Remove write protection and re-format the card.  
............................................................. pages E-38, 39  
(1) The memory card has a format that is not  
supported by this keyboard.  
(2) The memory card has a capacity that is not  
supported by this keyboard.  
(1) Use this keyboard to format the card.  
............................................................... page E-39  
(2) This keyboard supports cards with a capacity  
of 1 GB or less.  
............................................................... page E-38  
(3) Use a different card.  
(3) There is something wrong with the memory  
card.  
Err Not SMF0  
Err Card R/W  
There is no Format 0 SMF format file. This keyboard  
supports Format 0 SMF files only.  
Use a Format 0 SMF format file.  
..................................................................... page E-38  
The memory card cannot be written to or formatted  
for some reason.  
Use a different card.  
663A-E-043A  
E-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using a Memory Card  
Err Mem Full  
The keyboard ran out of memory for SMF data  
reading during a playback, lesson or use of the  
evaluation feature.  
After a few seconds, the Err Mem Fullmessage will be replaced by one of the messages described  
below.  
<dEL UsrSong?>  
This message asks whether you want to delete the contents of Song Bank user area for storage of SMF  
data (10 songs) in order to make room for the SMF data you are trying to read. To clear this message  
and return to the Card Bank Mode screen, press the [] (NO) button.  
1) Press the [+] (YES) button if you want to delete Song Bank user area contents.  
This causes a confirmation message to appear on the display.  
If you want to cancel the delete operation, press the [] (NO) button. This returns you to the  
confirmation message.  
2) Press the [+] (YES) button to delete Song Bank user area contents.  
After Song Bank user area contents are deleted, the keyboard automatically starts reading of the  
SMF data you originally selected, and then starts the playback, lesson, or evaluation.  
Card Bank Mode screen  
Playback  
Step1 to 3  
Scoring1 to 3  
Err Mem Full  
After a few seconds  
NO()  
dEL UsrSong?  
YES(+)  
NO()  
Sure ?  
YES(+)  
Pls Wait  
The keyboard starts the playback, lesson, or evaluation  
E-42  
663A-E-044A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Possible Cause  
Action  
See page  
No keyboard sound  
(1) Power supply problem.  
(1) Correctly attach the AC  
adaptor, make sure that  
batteries poles (+/) are facing  
correctly, and check to make  
sure that batteries are not dead.  
(2) Adjust the POWER/MODE  
switch to turn on power.  
Page E-13  
(2) Power is not turned on.  
(3) Volume setting is too low.  
Page E-16  
Page E-16  
Page E-28  
(3) Use the MAIN VOLUME slider  
to increase volume.  
(4) The POWER/MODE switch is  
in the CASIO CHORD or  
FINGERED position.  
(4) Normal play is not possible on  
the accompaniment keyboard  
while the POWER/MODE  
switch is set to CASIO CHORD  
or FINGERED. Change the  
POWER/MODE switch setting  
to NORMAL.  
(5) LOCAL CONTROL is off.  
Low battery power  
(5) Turn on LOCAL CONTROL.  
Page E-37  
Any of the following symptoms  
while using battery power.  
Replace the batteries with a set of  
new ones or use the AC adaptor.  
Pages  
E-12, 13  
Dim power supply indicator  
Instrument does not turn on  
Dim, difficult to read display  
Abnormally low speaker/headphone volume  
Distortion of sound output  
Occasional interruption of sound when playing at high volumes  
Sudden power failure when playing at high volumes  
Dimming of the display when playing at high volume  
Continued sound output even after you release a key  
A totally different tone may sound  
Abnormal rhythm pattern and demo tune play  
Abnormally low microphone volume  
Distortion of microphone input  
Dim power supply indicator when a microphone is used  
Sudden power failure when using the microphone  
Dimming of keyboard lights when notes sound  
Loss of power, sound distortion, or low volume when playing from a connected computer  
Auto Accompaniment does not  
sound.  
Accompaniment volume is set to  
000.  
Use the FUNCTION button to  
increase the volume.  
Page E-32  
Key light stays on.  
Keyboard is waiting for play of  
the correct note during Step 1 or  
Step 2 play.  
Press the lit key to continue with  
Step 1 or Step 2 play.  
Press the PLAY/STOP button to  
quit Step 1 or Step 2 play.  
Pages  
E-24, 25  
Pages  
E-24, 25  
Keys are lit though no sound is  
being produced.  
Power on alert is reminding you  
that power was left on without  
any operation being performed.  
Press any button or keyboard key  
to restore power to normal.  
Page E-14  
Page E-37  
Page E-17  
Cannot  
record  
chord  
ACCOMP OUT is turned off.  
Turn on ACCOMP OUT.  
accompaniment data on  
computer.  
a
Static noise when a microphone is  
connected.  
Use of the microphone in the  
vicinity of fluorescent lighting.  
Move the microphone away from  
source of the static.  
663A-E-045A  
E-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Possible Cause  
Action  
See page  
No microphone sound  
(1) Microphone volume setting is  
too low.  
(1) Increase the microphone  
volume setting.  
Page E-17  
(2) Microphone on/off switch is  
set to off.  
(2) Change the microphone on/off  
switch setting to on.  
Page E-17  
Page E-39  
Cannot recall data from a memory  
card.  
(1) The memory card is not  
inserted correctly into the card  
slot.  
(1) Correctly insert the memory  
card into the card slot.  
(2) The memory card is damaged.  
(3) The data has not been copied  
(2) Use a different memory card.  
(3) Insert a formatted memory card  
into the memory card slot of  
your computer, and copy the  
data you want to play back into  
to  
the  
memory  
card  
MUSICDAT folder.  
the  
directory  
named  
MUSICDAT.  
Song play momentarily cuts out  
at some points during SMF play.  
Data is fragmented.  
Perform either of the two following  
operations.  
Without deleting the original  
(fragmented) data, perform a  
save asoperation to save the  
data under a different name.  
Next, try performing the  
operation using the newly saved  
data.  
–––  
If you saved the data to the card  
from another location, format the  
card (which will delete its  
contents), and then save the data  
to the card again. Next, try  
performing the operation using  
the newly saved data.  
Page E-39  
Auto accompaniment chords do  
not sound.  
The keyboard is in the Song Bank  
mode.  
Press the RHYTHM button to enter  
the rhythm mode, which is  
indicated by the rhythm indicator  
on the display.  
Page E-27  
Page E-35  
After transferring song data from  
my computer, playback stops part  
way through.  
Digital noise from the USB cable  
or power cord caused data  
communication between your  
computer and keyboard to be  
interrupted.  
Stop playback, disconnect the USB  
cable from and then reconnect it to  
the keyboards USB port, and then  
try playing back the tune again.  
If this does not correct the problem,  
exit the MIDI software you are  
using, and then disconnect the USB  
cable from and then reconnect it to  
the keyboards USB port. Next,  
restart your MIDI software and try  
playback again.  
A tones quality and volume  
This is an unavoidable result of the digital sampling process,* and does not indicate  
malfunction.  
sounds  
slightly  
different  
depending where it is played on  
the keyboard.  
* Multiple digital samples are taken for the low range, middle range, and high range of  
the original musical instrument. Because of this, there may be a very slight difference  
in tonal quality and volume between sample ranges.  
E-44  
663A-E-046A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Model:  
LK-200S  
Keyboard:  
61 standard-size keys, 5 octaves  
Key Light System:  
Tones:  
Can be turned on and off (up to 10 keys can be lit at the same time)  
264 (128 panel tones + 128 General MIDI tones + 8 drum sets)  
Reverb (4 types), Chorus (4 types)  
Digital Effects:  
Polyphony:  
32 notes maximum (16 for certain tones)  
Auto Accompaniment  
Rhythm Patterns:  
Chords:  
120  
2 fingering methods (CASIO CHORD, FINGERED)  
START/STOP, INTRO, NORMAL/FILL-IN, VARIATION/FILL-IN,  
SYNCHRO/ENDING  
Rhythm Controller:  
Accomp Volume:  
0 to 127 (128 steps)  
3-step Lesson:  
Playback:  
3 lessons (Step 1, 2, 3)  
Repeat play of a single tune  
Left hand, right hand, both hands  
Scoring  
Lesson Part:  
Evaluation Mode:  
Voice Fingering Guide:  
On/Off  
Song Bank, Piano Bank  
Number of Tunes:  
Controllers:  
100 (Song Bank: 65, Piano Bank: 35)  
PLAY/STOP, PAUSE, FF, REW, REPEAT  
User Songs:  
Number of Songs: Up to 10 download songs  
Capacity: Approximately 320 KB*  
* Calculated based on 1 KB = 1024 bytes.  
Metronome:  
On/Off  
0, 2 to 6  
Beat Specification:  
Other Functions  
Tempo:  
Variable (226 steps, = 30 to 255)  
Transpose:  
Tuning:  
25 steps (12 semitones to +12 semitones)  
101 steps (A4 = approximatery 440Hz 50Cents)  
Card  
Supported Memory Cards:  
SD memory cards, optional CASIO song data cards*  
* May not be available in some geographic areas.  
Supported SD Cards:  
Maximum Number of  
Importable Songs:  
Supported Data:  
1 GB or less (Cards with capacity greater than 1 GB are not supported.)  
Up to 1,000  
SMF Format 0, CASIO Original Format CM2  
Terminals  
SUSTAIN/ASSIGNABLE JACK:  
PHONES/OUTPUT Jack:  
Standard jack (sustain, sostenuto, soft, rhythm start/stop)  
Stereo standard jack  
Output Impedance: 78  
Output Voltage: 4.5V (RMS) MAX  
Standard jack (with microphone volume knob)  
Input impedance: 2KΩ  
Microphone In:  
Input sensitivity: 10mV  
USB port  
SD CARD SLOT  
Power Jack:  
9V DC  
663A-E-047A  
E-45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Power Supply:  
2-way  
Batteries:  
6 AA-size batteries  
Battery Life:  
Approximately 1 hour continuous operation on manganese batteries  
Approximately 4 hours continuous operation on alkaline batteries  
AD-5  
AC Adaptor:  
Auto Power Off:  
Turns power off approximately 6 minutes after last key operation. Enabled under  
batter power only, can be disabled manually.  
Speaker Output:  
Power Consumption:  
Dimensions:  
2.0W + 2.0W  
9V  
94.5 × 37.3 × 13.5 cm (37 1/4 × 14 11  
Approximately 4.7kg (10.4 lbs)(without batteries)  
7.7W  
/
16 × 5 5/16 inch)  
Weight:  
Design and specifications are subject to change without notice.  
Care of your keyboard  
Avoid heat, humidity or direct sunlight.  
Do not overexpose the instrument to direct sunlight, or place it near an air conditioner, or in any extremely hot place.  
Do not use lacquer, thinner or similar chemicals for cleaning.  
Clean the keyboard with a soft cloth dampened in a weak solution of water and a neutral detergent. Soak the cloth in the solution  
and squeeze until it is almost dry.  
Avoid use in areas subjected to temperature extremes.  
Extremely high or low temperature can cause figures on the LCD screen to become dim and difficult to read. This condition  
should correct itself when the keyboard is brought back to normal temperature.  
NOTE  
You may notice lines in the finish of the case of this keyboard. These lines are a result of the molding process used to shape  
the plastic of the case. They are not cracks or breaks in the plastic, and are no cause for concern.  
E-46  
663A-E-048A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
ab  
ab  
one  
T
L
663A-E-097A  
A-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
A
N
N
A-2  
663A-E-098A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
=
A
440Hz  
Range Type/  
Tipo de gama  
-
C 1  
C0  
C1  
C2  
C3  
C4  
C5  
C6  
C7 G7 C8  
C9 G9  
A
(Standard type)  
(Tipo estándar)  
B
020 GLOCKENSPIEL/  
095 PICCOLO”  
020 GLOCKENSPIEL/  
095 PICCOLO”  
C
Low pitch  
instruments  
Instrumentos de  
altura tonal baja  
D
No scale for tones.  
Sin escala para los sonidos.  
(Sound Effect)  
(Efecto de sonido)  
........Keyboard range  
........Gama del teclado  
a
b
........Available range (using transpose or a message receive)  
........Gama disponible (usando la transposición o recepción de mensaje)  
663A-E-099A  
A-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
A
N
N
a
í
n
ó
Ass  
D
A-4  
663A-E-100A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
F
Cuad  
663A-E-101A  
A-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
Rhythm List/Lista de ritmos  
POPS I  
ROCK I  
EUROPEAN  
VARIOUS II  
000  
001  
002  
003  
004  
005  
006  
007  
POP 1  
WORLD POP  
8 BEAT POP  
SOUL BALLAD 1  
POP SHUFFLE 1  
8 BEAT DANCE  
POP BALLAD 1  
POP BALLAD 2  
030  
031  
032  
033  
034  
035  
036  
037  
038  
039  
POP ROCK 1  
060 POLKA  
090  
091  
092  
093  
094  
095  
096  
097  
098  
099  
FOLKLORE  
JIVE  
POP ROCK 2  
POP ROCK 3  
FOLKIE POP  
POP SHUFFLE 2  
ROCK BALLAD  
SOFT ROCK  
ROCK 1  
061  
062  
063  
064  
065  
066  
067  
POP POLKA  
MARCH 1  
MARCH 2  
WALTZ 1  
SLOW WALTZ  
VIENNESE WALTZ  
FRENCH WALTZ  
FAST GOSPEL  
SLOW GOSPEL  
SIRTAKI  
HAWAIIAN  
ADANI  
BALADI  
ENKA  
STR QUARTET  
008 BALLAD  
009  
ROCK 2  
HEAVY METAL  
068 SERENADE  
069 TANGO  
FUSION SHUFFLE  
POPS II  
ROCK II  
LATIN I  
FOR PIANO I  
010  
011  
012  
013  
014  
015  
016  
017  
018  
SOUL BALLAD 2  
040  
041  
042  
043  
044  
045  
046  
047  
048  
049  
JAZZ  
050  
051  
052  
053  
054  
055  
056  
057  
058  
059  
60'S SOUL  
070 BOSSA NOVA 1  
071 BOSSA NOVA 2  
100  
101  
102  
103  
104  
105  
106  
107  
108  
109  
PIANO BALLAD 1  
16 BEAT 1  
16 BEAT 2  
8 BEAT 1  
8 BEAT 2  
8 BEAT 3  
DANCE POP 1  
POP FUSION  
POP 2  
60'S ROCK  
SLOW ROCK  
SHUFFLE ROCK  
50'S ROCK  
BLUES  
NEW ORLNS R&R  
TWIST  
R&B  
PIANO BALLAD 2  
PIANO BALLAD 3  
EP BALLAD 1  
072  
073  
SAMBA 1  
SAMBA 2  
074 MAMBO  
075 RHUMBA  
076 CHA-CHA-CHA  
077 MERENGUE  
078 BOLERO  
079 SALSA  
EP BALLAD 2  
BLUES BALLAD  
MELLOW JAZZ  
JAZZ COMBO 2  
RAGTIME  
019 POP WALTZ  
DANCE/FUNK  
020 DANCE  
021  
022  
023  
024  
025  
026 TECHNO  
027 TRANCE  
028 HIP-HOP  
029 FUNK  
ROCK WALTZ  
BOOGIE-WOOGIE  
LATIN II/VARIOUS I  
FOR PIANO II  
BIG BAND 1  
BIG BAND 2  
BIG BAND 3  
SWING  
SLOW SWING  
FOX TROT  
JAZZ COMBO 1  
JAZZ VOICE  
ACID JAZZ  
JAZZ WALTZ  
080  
REGGAE  
110  
111  
112  
113  
114  
115  
116  
117  
118  
119  
ARPEGGIO 1  
DISCO 1  
DISCO 2  
EURO BEAT  
DANCE POP 2  
GROOVE SOUL  
081 PUNTA  
082 CUMBIA  
ARPEGGIO 2  
ARPEGGIO 3  
PIANO BALLAD 4  
6/8 MARCH  
MARCH 3  
2 BEAT  
WALTZ 2  
WALTZ 3  
WALTZ 4  
083  
PASODOBLE  
084 SKA  
085 BLUEGRASS  
086 DIXIE  
087 TEX-MEX  
088  
089  
COUNTRY 1  
COUNTRY 2  
NOTE  
Rhythms 110 through 119 consist of chord accompaniments only, without any drums or other percussion instruments. These  
rhythms do not sound unless CASIO CHORD or FINGERED is selected as the accompaniment mode. With such rhythms,  
make sure that CASIO CHORD or FINGERED is selected before you try playing chords.  
NOTA  
Los ritmos 110 al 119 consisten solamente de acompañamientos de acordes, sin ninguna batería ni otros instrumentos de  
percusión. Estos ritmos no suenan a menos que CASIO CHORD o FINGERED sean seleccionados como el modo de  
acompañamiento. Con tales ritmos, asegúrese de que se selecciona CASIO CHORD o FINGERED, antes de tratar de  
ejecutar los acordes.  
A-6  
663A-E-102A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
Song  
663A-E-103A  
A-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
663A-E-106A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
663A-E-107A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This recycle mark indicates that the packaging conforms to  
the environmental protection legislation in Germany.  
Esta marca de reciclaje indica que el empaquetado se  
ajusta a la legislación de protección ambiental en Alemania.  
CASIO COMPUTER CO.,LTD.  
6-2, Hon-machi 1-chome  
Shibuya-ku, Tokyo 151-8543, Japan  
C
MA0603-A Printed in China  
LK200ES1A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Binatone Automobile Accessories TTSE110 User Manual
Black Decker Pressure Washer PW2100 User Manual
Blue Rhino Lawn Mower TM60 User Manual
Blue Sea Systems Yard Vacuum PN 8363 User Manual
Bosch Appliances Range HES7282U User Manual
Briggs Stratton Flat Panel Television 400400 User Manual
Bushnell Digital Camera 119204 User Manual
Cambridge Audio DVD Player Azur 540D V2 User Manual
Chamberlain Garage Door Opener PD752D User Manual
Chevrolet Automobile 2010 Aveo Sedan User Manual