Casio Network Card Adaptor User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Safety Precautions  
Congratulations on your selection of the CASIO electronic  
musical instrument.  
DANGER  
Š
Before using the instrument, be sure to carefully read  
through the instructions contained in this manual.  
Alkaline Batteries  
Perform the following steps immediately if  
fluid leaking from alkaline batteries ever gets  
into your eyes.  
Š
Please keep all information for future reference.  
Symbols  
Various symbols are used in this user’s  
guide and on the product itself to  
ensure that the product is used safely  
and correctly, and to prevent injury to  
the user and other persons as well as  
damage to property. Those symbols  
along with their meanings are shown  
below.  
1. Do not rub your eyes! Rinse them with  
water.  
2. Contact your physician immediately.  
Leaving alkaline battery fluid in your eyes  
can lead to loss of sight.  
WARNING  
This symbol indicates information  
that, if ignored or applied  
incorrectly, creates the danger of  
death or serious personal injury.  
Smoke, Strange Odor, Overheating  
DANGER  
Continued use of the product while it is  
emitting smoke, a strange odor, or heat  
creates the risk of fire and electric shock. Take  
the following steps immediately.  
This indication stipulates matters  
that have the risk of causing death  
or serious injury if the product is  
operated incorrectly while  
WARNING  
1. Turn off power.  
ignoring this indication.  
2. If you are using the AC adaptor for  
power, unplug it from the wall outlet.  
This indication stipulates matters  
that have the risk of causing injury  
as well as matters for which there is  
the likelihood of occurrence of  
physical damage only if the  
3. Contact your original retailer or an  
authorized CASIO Service Provider.  
CAUTION  
AC Adaptor  
product is operated incorrectly  
while ignoring this indication.  
Misuse of the AC adaptor creates the risk of  
fire and electric shock. Always make sure  
you observe the following precautions.  
Š
Š
Be sure to use only the AC adaptor that is  
specified for this product.  
Symbol Examples  
This triangle symbol (  
should be careful. (The example at left  
indicates electrical shock caution.)  
) means that the user  
Use only a power source whose voltage  
is within the rating marked on the AC  
adaptor.  
This circle with a line through it (  
that the indicated action must not be  
performed. Indications within or nearby this  
symbol are specifically prohibited. (The  
example at left indicates that disassembly is  
prohibited.)  
) means  
Š
Do not overload electrical outlets and  
extension cords.  
AC Adaptor  
Misuse of the AC adaptor’s electric cord can  
damage or break it, creating the risk of fire  
and electric shock. Always make sure you  
observe the following precautions.  
The black dot (  
) means that the indicated  
action must be performed. Indications within  
this symbol are actions that are specifically  
instructed to be performed. (The example at  
left indicates that the power plug must be  
unplugged from the electrical socket.)  
Š
Never place heavy objects on the cord or  
subject it to heat.  
641A-E-003A  
E-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
WARNING  
WARNING  
Disassembly and Modification  
Š
Never try to modify the cord or subject it  
to excessive bending.  
Never try to take this product apart or  
modify it in any way. Doing so creates the  
risk of electric shock, burn injury, or other  
personal injury. Leave all internal inspection,  
adjustment, and maintenance up to your  
original retailer or authorized CASIO Service  
Provider.  
Š
Š
Never twist or stretch the cord.  
Should the electric cord or plug become  
damaged, contact your original retailer  
or authorized CASIO Service Provider.  
AC Adaptor  
Dropping and Impact  
Never touch the AC adaptor while your  
hands are wet.  
Continued use of this product after it has  
been damaged by dropping or subjecting it to  
strong impact creates the risk of fire and  
electric shock. Take the following steps  
immediately.  
Doing so creates the risk of electric shock.  
Batteries  
Misuse of batteries can cause them to leak,  
resulting in damage to nearby objects, or to  
explode, creating the risk of fire and personal  
injury. Always make sure you observe the  
following precautions.  
1. Turn off power.  
2. If you are using the AC adaptor for  
power, unplug it from the wall outlet.  
Š
Š
Never try to take batteries apart or allow  
them to become shorted.  
3. Contact your original retailer or an  
authorized CASIO Service Provider.  
Never expose batteries to heat or dispose  
of them by incineration.  
Plastic Bags  
Never place the plastic bag the product  
comes in over your head or in your mouth.  
Doing so creates the risk of suffocation.  
Š
Š
Š
Š
Never mix old batteries with new ones.  
Never mix batteries of different types.  
Do not charge the batteries.  
Particular care concerning this precaution is  
required where small children are present.  
Keep off of the product and stand.*  
Make sure the positive (+) and negative  
(–) ends of the batteries are facing  
correctly.  
Climbing onto the product or stand can cause  
it to tip over or become damaged. Particular  
care concerning this precaution is required  
where small children are present.  
Do not incinerate the product  
Never throw the product into fire.  
Location  
Doing so can cause it to explode, creating the  
risk of fire and personal injury.  
Avoid locating the product on an unstable  
stand, on an uneven surface, or any other  
unstable location. An unstable location can  
cause the product to fall over, creating the  
risk of personal injury.  
Water and Foreign Matter  
Water, other liquids, and foreign matter  
(such as pieces of metal) getting into the  
product create the risk of fire and electric  
shock. Take the following steps immediately.  
1. Turn off power.  
2. If you are using the AC adaptor for  
power, unplug it from the wall outlet.  
3. Contact your original retailer or an  
authorized CASIO Service Provider.  
641A-E-004A  
E-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
CAUTION  
CAUTION  
Š
Remove batteries from the product if you  
do not plan to use it for a long time.  
AC Adaptor  
Misuse of the AC adaptor creates the risk of  
fire and electric shock. Always make sure  
you observe the following precautions.  
Connectors  
Connect only the specified devices and  
equipment to the product’s connectors.  
Connection of a non-specified device or  
equipment creates the risk of fire and electric  
shock.  
Š
Š
Do not locate the electric cord near a  
stove or other sources of heat.  
Never pull on the cord when unplugging  
from the electrical outlet. Always grasp  
the AC adaptor when unplugging.  
Location  
Avoid the following locations for this  
product. Such locations create the risk of fire  
and electric shock.  
AC Adaptor  
Misuse of the AC adaptor creates the risk of  
fire and electric shock. Always make sure  
you observe the following precautions.  
Š
Š
Š
Areas subject to high humidity or large  
amounts of dust.  
Š
Š
Insert the AC adaptor into the wall outlet  
as far as it will go.  
In food preparation areas or other areas  
subject to oil smoke.  
Unplug the AC adaptor from the wall  
outlet during lightning storms or before  
leaving on a trip or other long-term  
absence.  
Near air conditioning equipment, on a  
heated carpet, in areas exposed to direct  
sunlight, inside of a vehicle parked in the  
sun, or any other area that subjects the  
product to high temperatures.  
Š
At least once a year, unplug the AC  
adaptor from the wall outlet and wipe  
away any dust that is built up in the area  
around the prongs of the plug.  
Display Screen  
Š
Never push on the display screen’s LCD  
panel or subject it to strong impact.  
Doing so can cause the LCD panel’s glass  
to crack, creating the risk of personal  
injury.  
Relocating the Product  
Before relocating the product, always unplug  
the AC adaptor from the wall outlet and  
disconnect all other cables and connecting  
cords. Leaving cords connected creates the  
risk of damage to the cords, fire, and electric  
shock.  
Š
Š
Š
Should the LCD panel ever crack or  
break, never touch the liquid inside of  
the panel. LCD panel liquid can cause  
skin irritation.  
Cleaning  
Should LCD panel liquid ever get inside  
your mouth, immediately wash out your  
mouth with water and contact your  
physician.  
Before cleaning the product, always unplug  
the AC adaptor from the wall outlet first.  
Leaving the AC adaptor plugged in creates  
the risk of damage to the AC adaptor, fire,  
and electric shock.  
Should LCD panel liquid ever get into  
your eyes or onto your skin, rinse with  
clear water for at least 15 minutes, and  
then contact a physician.  
Batteries  
Misuse of batteries can cause them to leak  
resulting in damage to nearby objects, or to  
explode, creating the risk of fire and personal  
injury. Always make sure you observe the  
following precautions.  
Sound Volume  
Do not listen to music at very loud volumes  
for long periods. Particular care concerning  
this precaution is required when using  
headphones. High volume settings can  
damage your hearing.  
Š
Use only batteries that are specified for  
use with this product.  
641A-E-005A  
E-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
CAUTION  
Heavy Objects  
Never place heavy object on top of the  
product.  
Doing so can make the product top heavy,  
causing the product to tip over or the object  
to fall from it, creating the risk of personal  
injury.  
Correct Stand* Assembly  
An incorrectly assembled stand can tip over,  
causing the product to fall and creating the  
risk of personal injury.  
Make sure you assemble the stand correctly,  
following the assembly instructions that  
come with it. Make sure you mount the  
product on the stand correctly.  
*
Stand is available as an option.  
When using batteries, be sure to replace them or shift to one of  
the alternate power sources whenever you notice any of the  
following symptoms.  
Š
Š
Š
Š
Š
Š
Dim power indicator  
Instrument does not turn on  
Display that is flickering, dim, or difficult to read  
Abnormally low speaker/headphone volume  
Distortion of sound output  
Occasional interruption of sound when playing at high  
volume  
Š
Š
Sudden power failure when playing at high volume  
Flickering or dimming of the display when playing at high  
volume  
Š
Š
Š
Š
Š
Continued sound output even after you release a key  
A tone that is totally different from the one that is selected  
Abnormal rhythm pattern and Song Bank play  
Dimming of keyboard lights when notes sound  
Loss of power, sound distortion, or low volume when  
playing from a connected computer or MIDI device  
641A-E-006A  
E-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Main Features  
Main Features  
J
137 tones  
Everything from orchestra instruments to synthesized sounds, drum sets and more.  
J
100 rhythms  
A selection of rhythms that cover rock, pops, jazz and just about any other musical style imaginable.  
J
Auto Accompaniment  
Simply specify a chord and the keyboard automatically plays the correct rhythm, bass, and chord parts.  
J
100 built-in tunes  
A simple operation cuts out the melody part of any of the 100 Song Bank tunes so you can play along on the keyboard.  
J
Key Light System with 3-step lesson  
Use any of the 100 Song Bank tunes to learn to play as the keyboard keys light to teach you the correct notes. First practice the timing  
of the notes. Next, play along at your own pace. Soon you will be ready for step three, where you play along at normal speed.  
Š
Note that key lights may be difficult to see under direct sunlight or under other very bright lighting.  
J
Big display with a wealth of musical information  
A big, informative display shows you which fingers to use, which keys to press, staff notation of the notes being played, and much  
more.  
J
Memory function  
Record up to two parts in memory for later playback. Realistic ensemble play can also be created using the Auto Accompaniment  
function.  
J
General MIDI compatibility  
General MIDI tones let you connect to a personal computer and enjoy “desktop music” capabilities. This keyboard can be used as  
a desktop music input device or as a sound source, and it’s just the thing for play back of commercially available pre-recorded  
General MIDI music software.  
J
Keys light to show received MIDI messages  
The keyboard can be set up so its keys light in accordance with the channels of commercially available General MIDI music  
software. You can even turn off the output of a channel and play along on the keyboard.  
641A-E-007A  
E-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Adjusting the Tempo .......................... E-22  
Using Auto Accompaniment............... E-22  
Using an Intro Pattern ........................ E-25  
Using a Fill-in Pattern......................... E-25  
Using a Rhythm Variation................... E-25  
Safety Precautions ........ E-1  
Main Features ................ E-5  
Contents ......................... E-6  
General Guide ................ E-8  
Using a Fill-in Pattern with  
About the Display................................E-10  
a Variation Rhythm ............................ E-26  
Synchro Starting Accompaniment  
with Rhythm Play................................ E-26  
Quick Reference .......... E-11  
Finishing with an Ending Pattern........ E-26  
Power Supply .............. E-13  
Using batteries ....................................E-13  
Using the AC Adaptor .........................E-14  
Auto Power Off....................................E-14  
Power On Alert....................................E-14  
Settings and Memory Contents...........E-15  
Adjusting the Accompaniment  
Volume ............................................... E-27  
Song Bank ...................E-28  
Selecting a Tune ................................ E-28  
Playing a Tune ................................... E-28  
Adjusting the Tempo .......................... E-29  
Pausing Playback............................... E-29  
Fasting Reverse ................................. E-30  
Fasting Forward ................................. E-30  
Changing the Melody Tone ................ E-30  
Connections ................ E-16  
Phones/Output Terminal .....................E-16  
Sustain/Assignable  
jack Terminal.......................................E-16  
Accessories and Options ....................E-17  
Playing All Song Bank Tunes  
in Succession ..................................... E-31  
Basic Operations ......... E-18  
Playing the Keyboard..........................E-18  
Selecting a Tone .................................E-18  
3-Step Lesson ..............E-32  
Step 1 – Master the timing. ................ E-33  
Step 2 – Master the melody. .............. E-34  
Step 3 – Play at normal speed. .......... E-35  
Turning the Key Light System  
On and Off...........................................E-19  
Using the Metronome..........................E-19  
Song Memory  
Auto  
Function .......................E-36  
Accompaniment .......... E-21  
Tracks................................................. E-36  
Selecting a Rhythm.............................E-21  
Real-time Recording to Track 1.......... E-37  
Playing a Rhythm................................E-21  
641A-E-008A  
E-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Playing Back from Song Memory........E-39  
Real-time Recording to Track 2 ..........E-39  
Drum Assignment List .......................... A-3  
Fingered Chord Chart........................... A-4  
Rhythm List .......................................... A-6  
Recording Chords with  
Step Recording ...................................E-40  
MIDI Implementation Chart  
Step Recording Melody  
to Track 2 ............................................E-43  
Track 2 Contents After  
Step Recording ...................................E-43  
Editing Data While  
Step Recording ...................................E-44  
Deleting the Contents of  
a Specific Track...................................E-45  
Keyboard Settings ...... E-46  
Using Layer.........................................E-46  
Using Split...........................................E-47  
Using Layer and Split Together...........E-48  
Using Touch Response.......................E-49  
Transposing the Keyboard..................E-49  
Tuning the Keyboard...........................E-50  
MIDI ............................... E-51  
What is MIDI?......................................E-51  
General MIDI.......................................E-52  
Changing MIDI Settings ......................E-52  
Messages............................................E-56  
Troubleshooting .......... E-59  
Specifications .............. E-61  
Care of your  
keyboard ...................... E-63  
Appendix ........................A-1  
Note Table.............................................A-1  
641A-E-009A  
E-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Guide  
General Guide  
641A-E-010A  
E-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Guide  
*
Attaching the Score Stand  
Insert the score stand into the slot at the keyboard as  
shown in the illustration.  
1
2
3
4
5
6
7
8
9
MIDI OUT terminal  
MIDI IN terminal  
SUSTAIN/ASSIGNABLE JACK terminal  
PHONES/OUTPUT terminal  
DC 9V jack  
cs DEMO button  
Playing a Demo Tune  
Pressing the DEMO button starts demo tune play, which  
plays the 100 built-in tunes in sequence. To stop demo  
tune play, press the DEMO, START/STOP, or STOP  
button.  
Speaker  
Rhythm list  
Tone list  
Š
Š
Pressing [+] (forward) or [–] (back) skips to the next demo  
tune.  
Display  
You can change the tone setting of the keyboard (page  
E-18) before starting demo play, and then use that tone to  
play along on the keyboard.  
bk Song Bank list  
bl Chord root names  
bm Percussion instrument list  
bn Chord types name  
bo TRANSPOSE/TUNE/MIDI button  
bp ACCOMP VOLUME button  
bq METRONOME button  
br BEAT button  
Š
MIDI, Layer, and Split are disabled while a demo tune is  
playing.  
ct SPLIT button  
dk TOUCH RESPONSE button  
dl LAYER button  
dm Number buttons  
bs RHYTHM button  
Š
For input of numbers to change a displayed number  
or setting.  
bt SONG BANK button  
ck TONE button  
dn +/– buttons  
Negative values cannot be input using the number  
buttons. Use [+] (increase) and [–] (decrease) instead.  
cl POWER indicator  
cm POWER button  
Š
cn VOLUME slider  
do INTRO button  
co MODE switch  
dp NORMAL/FILL-IN button  
dq VAR/FILL-IN button  
dr SYNCHRO/ENDING button  
ds START/STOP button  
cp SONG MEMORY button  
cq STEP button  
cr KEY LIGHT button  
dt TEMPO  
ek TEMPO  
button  
button  
el STOP button  
em PLAY/PAUSE button  
en REW button  
eo FF button  
ep LEFT/TRACK 1 button  
eq RIGHT/TRACK 2 button  
er STEP 1 button  
es STEP 2 button  
et STEP 3 button  
641A-E-011A  
E-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Guide  
About the Display  
1.  
2.  
An indicator appears next to a function that is in use: GM (General MIDI Mode), SONG MEMORY (Song  
Memory), STEP (Step), KEY LIGHT (key light).  
This area shows tone number and name, rhythm number and name, and tune number and name. It also shows  
other information when using the song memory function and other functions. Indicators also appear here to  
show what kind of data is displayed: TONE (tone data), RHYTHM (rhythm data), SONG BANK (Song Bank  
data).  
3.  
This area is a staff notation display that shows notes being played on the keyboard or from song memory,  
chord forms, and MIDI receive data*. If you are using a pedal, a pedal mark ( ) appears here whenever you  
press the pedal.  
[Octave mark ( )] (HIGH)  
Appears when the note produced by the keyboard is one octave higher than the note indicated on the staff.  
[Octave mark ( )] (LOW)  
Appears when the note produced by the keyboard is one octave lower than the note indicated on the staff.  
* Received notes outside the range of C1 to C7 do not appear on the display.  
4.  
5.  
An indicator appears next to a function that is in use: LAYER (layer), SPLIT (split), TOUCH RESPONSE (touch  
response).  
This area shows fingerings, dynamic marks, finger crossing techniques, and other finger information during  
3-step lesson and Song Bank play. The letters “L” (left) and “R” (right) appear to indicate left and right hand  
Auto Accompaniment parts and memory tracks.  
6.  
This area shows measure number, beat number, a graphic metronome, and tempo value (beats per minute)  
during rhythm and Auto Accompaniment play, and when using song memory. It also shows the step number  
when using the 3-step lesson.  
7.  
This area shows chord names during Auto Accompaniment and Song Bank play.  
Š
Display examples shown in this User’s Guide are intended for illustrative purposes only. The actual text and values that appear on the  
display may differ from the examples shown in this User’s Guide.  
641A-E-012A  
E-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Reference  
Quick Reference  
1
POWER indicator  
Number buttons  
STEP 2  
2
5
MODE  
3
6
SONG BANK  
STEP 1  
4
7
POWER  
This section provides a quick overview of keyboard operation  
using steps one and two of the 3-step lesson feature.  
5.  
6.  
Press the STEP 1 button or STEP 2 button.  
Š
The keyboard sounds a count beat and waits for  
you to play something on the keyboard. The keys  
that you need to press first flash.  
To play the keyboard  
Play the melody along with the selected tune’s  
accompaniment.  
1.  
Press the POWER button to turn on power.  
Š
Play in accordance with the fingerings, notes, and  
dynamic marks that appear on the display.  
Š
This causes the power indicator to light.  
1
Lit  
2.  
Set the MODE switch to NORMAL.  
1
2
3
4
Indicator appears  
Fingering  
Note pitch  
Dynamic mark  
z If you selected lesson Step 1  
Š
Š
Play the notes on the keyboard.  
3.  
4.  
Press the SONG BANK button.  
A sub-melody (obbligato) plays in time with  
the melody.  
Find the tune you want to play in the Song Bank  
List, and then use the number buttons to input  
its two-digit number.  
Š
With Step 1, the correct melody note is played  
no matter which keyboard key you press.  
Example:  
To select “48 ALOHA OE”, input 4 and then 8.  
641A-E-013A  
E-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Reference  
z If you selected lesson Step 2  
Š
Play the correct notes on the keyboard.  
Š
Press the keyboard key that lights. Note that  
with tunes 70 through 99, the keyboard key  
light turns off as soon as you press the key.  
Š
Š
The keyboard key for the next note you will  
need to play flashes.  
A sub-melody (obbligato) plays in time with  
the melody, as long as you press the correct  
keyboard keys.  
641A-E-014A  
E-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Supply  
Power Supply  
z Any of the following symptoms indicate low battery  
power. Replace batteries as soon as possible whenever  
any of the following occurs.  
This keyboard can be powered by current from a standard  
household wall outlet (using the specified AC adaptor) or by  
batteries. Always make sure you turn the keyboard off  
whenever you are not using it.  
Š
Š
Š
Š
Š
Š
Dim power indicator  
Instrument does not turn on  
Display that is flickering, dim, or difficult to read  
Abnormally low speaker/headphone volume  
Distortion of sound output  
Using batteries  
Occasional interruption of sound when playing at  
high volume  
Always make sure you turn off the keyboard before loading  
or replacing batteries.  
Š
Š
Sudden power failure when playing at high volume  
Flickering or dimming of the display when playing at  
high volume  
To load batteries  
Š
Š
Continued sound output even after you release a key  
A tone that is totally different from the one that is  
selected  
1.  
Remove the battery compartment cover.  
Š
Š
Š
Abnormal rhythm pattern and Song Bank play  
Dimming of keyboard lights when notes sound  
Loss of power, sound distortion, or low volume when  
playing from a connected computer or MIDI device  
2.  
Load 6 D-size batteries into the battery  
compartment.  
Misuse of batteries can cause them to leak, resulting in damage  
to nearby objects, or to explode, creating the risk of fire and  
personal injury. Always make sure you observe the following  
precautions.  
Š
Make sure that the positive (+) and negative (–)  
ends are facing correctly.  
Š
Never try to take batteries apart or allow them to  
become shorted.  
Š
Never expose batteries to heat or dispose of them by  
incineration.  
3.  
Insert the tabs on the battery compartment  
cover into the holes provided and close the  
cover.  
Š
Š
Š
Š
Never mix old batteries with new ones.  
Never mix batteries of different types.  
Do not charge the batteries.  
Make sure the positive (+) and negative (–) ends of  
the batteries are facing correctly.  
The keyboard may not function correctly if you load or  
replace batteries with power turned on. If this happens,  
turning the keyboard off and then back on again should  
return functions back to normal.  
Misuse of batteries can cause them to leak resulting in damage  
to nearby objects, or to explode, creating the risk of fire and  
personal injury. Always make sure you observe the following  
precautions.  
Š
Use only batteries that are specified for use with this  
product.  
Š
Remove batteries from the product if you do not plan  
to use it for a long time.  
Important Battery Information  
z The following shows the approximate battery life.  
Š
Manganese batteries ................................. 5 hours*  
*
The above value is standard battery life at normal  
temperature, with the keyboard volume at medium  
setting. Temperature extremes or playing at very  
loud volume settings can shorten battery life.  
641A-E-015A  
E-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Supply  
Using the AC Adaptor  
Misuse of the AC adaptor creates the risk of fire and electric  
shock. Always make sure you observe the following  
precautions.  
Make sure that you use only the AC adaptor specified for this  
keyboard.  
Š
Do not locate the electric cord near a stove or other  
sources of heat.  
Š
Never pull on the cord when unplugging from the  
electrical outlet. Always grasp the AC adaptor when  
unplugging.  
Specifled AC Adaptor: AD-5  
Š
Š
Insert the AC adaptor into the wall outlet as far as it  
will go.  
Unplug the AC adaptor from the wall outlet during  
lightning storms or before leaving on a trip or other  
long-term absence.  
Š
At least once a year, unplug the AC adaptor from the  
wall outlet and wipe away any dust that is built up in  
the area around the prongs of the plug.  
1
2
3
DC 9V jack  
AC adaptor AD-5  
AC outlet  
Š
Š
Make sure that the keyboard is turned off before  
connecting or disconnecting the AC adaptor.  
Using the AC adaptor for a long time can cause it to  
become warm to the touch. This is normal and does not  
indicate malfunction.  
Also note the following important warnings and precautions  
when using the AC adaptor.  
Misuse of the AC adaptor creates the risk of fire and electric  
shock. Always make sure you observe the following  
precautions.  
Auto Power Off  
Š
Š
Š
Š
Š
Be sure to use only the AC adaptor that is specified  
for this product.  
When you are using battery power, keyboard power turns off  
automatically whenever you leave it on without performing  
any operation for about 6 minutes. When this happens, press  
the POWER button to turn power back on.  
Use only a power source whose voltage is within the  
rating marked on the AC adaptor.  
Do not overload electrical outlets and extension  
cords.  
Never place heavy objects on the cord or subject it to  
heat.  
Never try to modify the cord or subject it to excessive  
bending.  
Š
Auto Power Off is disabled (it does not function) when you  
are using the AC adaptor to power the keyboard.  
Š
Š
Never twist or stretch the cord.  
Should the electric cord or plug become damaged,  
contact your original retailer or authorized CASIO  
Service Provider.  
Š
Never touch the AC adaptor while your hands are  
wet.  
Power On Alert  
Doing so creates the risk of electric shock.  
Keyboard keys light to alert you if you leave power on and do  
not perform any operation for about 6 minutes. Note that keys  
light only, and no sound is produced. When this happens,  
press any button or keyboard key to clear the power on alert.  
Š
Power on alert operates only when you are powering the  
keyboard using the AC adaptor. It does not operate when  
you are using batteries.  
641A-E-016A  
E-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Supply  
To disable Auto Power Off and power on  
alert  
Power Requirements  
Note the following precautions whenever you want to ensure  
that current keyboard settings and memory contents are not  
lost.  
Hold down the TONE button while turning on the keyboard  
to disable Auto Power Off and power on alert.  
Š
Š
Š
Make sure the keyboard is being supplied power through  
the AC adaptor before replacing its batteries.  
Š
When these functions are turned off, the keyboard does  
not turn off automatically and no alert is performed no  
matter how long it is left with no operation being  
performed.  
Before unplugging the AC adaptor, make sure that fresh  
batteries are loaded in the keyboard.  
Make sure that keyboard power is turned off before  
replacing batteries or unplugging the AC adaptor.  
Š
Auto Power Off and power on alert are enabled again  
when you manually turn off power and then turn it back  
on again.  
Settings and Memory Contents  
Settings  
Tone, rhythm, and other “main keyboard settings” in effect  
when power is turned off manually with the POWER button  
or automatically by Auto Power Off remain in effect when  
you next turn power back on.  
Main Keyboard Settings  
Main keyboard settings are: tone number, layer, split,  
split point, touch response, rhythm number, tempo,  
accompaniment volume, General MIDI mode on/off,  
accomp MIDI OUT on/off, Sustain/Assignable jack  
setting, keyboard channel, and Song Bank number.  
Memory Contents  
In addition to the above settings, data stored using the song  
memory function is also retained.  
Electrical Power  
The settings and memory data described above are retained  
as long as the keyboard is being supplied with electrical  
power. Unplugging the AC adaptor when batteries are not  
loaded or when loaded batteries are dead cuts off the  
keyboard’s electrical power supply. This causes all settings to  
be initialized to their factory defaults and clears all data  
stored in memory.  
641A-E-017A  
E-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connections  
When connected to a musical instrument amplifier, set the  
volume of the keyboard to a relatively low level and make  
output volume adjustments using the amplifier’s controls.  
Phones/Output Terminal  
Before connecting headphones or other external equipment,  
be sure to first turn down the volume settings of the keyboard  
and the connected equipment. You can then adjust volume to  
the desired level after connections are complete.  
Connection Example  
Rear Panel  
Sustain/Assignable jack  
Terminal  
You can connect an optional sustain pedal (SP-2, SP-10 or  
SP-20) to the SUSTAIN/ASSIGNABLE JACK terminal to  
enable the capabilities described below.  
For details on how to select the pedal function you want, see  
“SUSTAIN/ASSIGNABLE JACK” on page E-55.  
J
Connecting Headphones (Figure 1)  
Connecting headphones cuts off output from the keyboard’s  
built-in speakers, so you can play even late at night without  
disturbing anyone.  
J
Audio Equipment (Figure 2)  
Connect the keyboard to an audio equipment using a  
commercially available connecting cord with a standard plug  
on one end and two PIN plugs on the other end. Note that the  
standard plug you connect to the keyboard must be a stereo  
plug, otherwise you will be able to output only one of stereo  
channels. In this configuration, you normally set the input  
selector of the audio equipment to the terminal (usually  
marked AUX IN or something similar) where the cord from  
the keyboard is connected. See the user documentation that  
comes with your audio equipment for full details.  
1
SUSTAIN/ASSIGNABLE JACK Terminal  
J
Sustain Pedal  
Š
With piano tones, depressing the pedal causes notes to  
linger, much like a piano’s damper pedal.  
Š
With organ tones, depressing the pedal causes notes to  
continue to sound until the pedal is released.  
J
Musical Instrument Amplifier (Figure 3)  
Use a commercially available connecting cord to connect the  
keyboard to a musical instrument amplifier.  
J
Sostenuto Pedal  
Š
As with the sustain pedal function described above,  
depressing the sostenuto pedal causes notes to be  
sustained.  
Š
Be sure to use a connecting cord that has a stereo  
standard plug on the end you connect to the keyboard, and  
a connector that provides dual channel (left and right) input  
to the amplifier to which you are connecting. The wrong  
type of connector at either end can cause one of the stereo  
channels to be lost.  
Š
This difference between a sostenuto pedal and sustain  
pedal is the timing. With a sostenuto pedal, you press the  
keys and then depress the pedal before you release the  
keys. Only the notes that are sounding when the pedal is  
depressed are sustained.  
J
Soft Pedal  
Depressing the pedal softens the sound of the notes being  
played.  
641A-E-018A  
E-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
J
Rhythm Start/Stop Pedal  
In this case, the pedal performs the same functions as the  
START/STOP button.  
Accessories and Options  
Use only the accessories and options specified for this  
keyboard. Use of non-authorized items creates the danger of  
fire, electric shock, and personal injury.  
641A-E-019A  
E-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Basic Operations  
1
VOLUME  
2
5
8
MODE  
BEAT  
3
6
9
KEY LIGHT  
TONE  
4
7
METRONOME  
Number buttons  
POWER  
START/STOP  
bk TEMPO  
bl [+]/[–]  
This section provides information on performing basic  
keyboard operations.  
Playing the Keyboard  
1
Indicator appears  
3.  
Use the number buttons to input the three digit  
tone number for the tone you want to select.  
To play the keyboard  
Example:  
To select “032 ACOUSTIC BASS”, input 0, 3 and  
then 2.  
1.  
Press the POWER button to turn the keyboard  
on.  
2.  
3.  
Set the MODE switch to NORMAL.  
Use the VOLUME slider to set the volume to a  
relatively low level.  
4.  
Play something on the keyboard.  
Š
Always input all three digits for the tone number, including  
leading zeros (if any). If you input one or two digits and  
stop, the display will automatically clear your input after a  
few seconds.  
Selecting a Tone  
Š
Š
You can also increment the displayed tone number by  
pressing [+] and decrement it by pressing [–].  
When one of the drum sets is selected (tone numbers 128  
through 136), each keyboard key is assigned a different  
percussion sound. See page A-3 for details.  
This keyboard comes with 137 built-in tones. Use the  
following procedure to select the tone you want to use.  
To select a tone  
Polyphony  
1.  
2.  
Find the tone you want to use in the keyboard’s  
tone list and note its tone number.  
The term polyphony refers to the maximum number of notes  
you can play at the same time. The keyboard has 24-note  
polyphony, which includes the notes you play as well as the  
rhythms and auto-accompaniment patterns that are played  
by the keyboard. This means that when a rhythm or auto-  
accompaniment pattern is being played by the keyboard, the  
Press the TONE button.  
641A-E-020A  
E-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
number of notes (polyphony) available for keyboard play is  
reduced. Also note that some of the tones offer only 12-note  
polyphony.  
Using the Metronome  
Š
When rhythm or auto accompaniment is playing, the  
number of sounds simultaneously played is reduced.  
The metronome feature of this keyboard produces a bell  
sound for the first beat of each measure, followed by click  
sounds for each successive beat of the measure. It is the  
perfect tool for practicing tunes without accompaniment  
(rhythm).  
Digital Sampling  
A number of the tones that are available with this keyboard  
have been recorded and processed using a technique called  
digital sampling. To ensure a high level of tonal quality,  
samples are taken in the low, mid, and high ranges and then  
combined to provide you with sounds that are amazingly  
close to the originals. You may notice very slight differences  
in volume or sound quality for some tones when you play  
them at different positions on the keyboard. This is an  
unavoidable result of multiple sampling, and it is not a sign  
of malfunction.  
To start the metronome  
1.  
Press the METRONOME button to start  
sounding the metronome.  
Turning the Key Light System  
On and Off  
2.  
Press the BEAT button and then use the  
number buttons or [+] and [–] to change the  
number of beats per measure.  
Use the following procedure when you want to turn the key  
light system on or off.  
Š
You can specify the number of beats per measure  
as a value from 1 to 6.  
To turn the key light system on and off  
1.  
Press the KEY LIGHT button to toggle the key  
light system on and off.  
Š
The bell (indicating the first beat of a measure) does not  
sound while one beat per measure is specified. All beats  
are indicated by a click sound. This setting lets you practice  
with a steady beat, without worrying about how many beats  
there are in each measure.  
Š
The KEY LIGHT pointer disappears when the  
key light system is turned off.  
3.  
Use the TEMPO buttons to set the tempo.  
Š
Press  
to increase the tempo (make if faster) or  
to decrease it (make it slower).  
Š
The key light system is turned on automatically whenever  
you turn on keyboard power.  
1
2
Flash  
Tempo value  
641A-E-021A  
E-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Š
Š
While the tempo value is flashing, you can also use the  
number buttons or [+] and [–] to input a three-digit value.  
Note that you must input leading zeros, so 90 is input as  
090.  
Pressing both the and TEMPO buttons at the same  
time automatically returns the currently selected rhythm to  
its default tempo.  
4.  
To turn off the metronome, press the  
METRONOME or START/STOP button.  
Š
Š
The metronome is disabled whenever you are using Step 1  
or Step 2 of the 3-step lesson.  
Starting play of a two-hand tune (Song Bank tunes 70  
through 99) or Step 3 of the 3-step lesson while the  
metronome is operating or activating the metronome while  
either of the two above operations is already in progress  
causes the metronome to sound in time with the Auto  
Accompaniment played by the keyboard. At this time, the  
tempo of the metronome beat changes to that of the default  
tempo for the Auto Accompaniment being played.  
641A-E-022A  
E-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Accompaniment  
Auto Accompaniment  
1
MODE  
2
5
8
ACCOMP VOLUME  
INTRO  
3
6
9
RHYTHM  
4
7
Number buttons  
VAR/FILL-IN  
NORMAL/FILL-IN  
START/STOP  
SYNCHRO/ENDING  
bk TEMPO  
bl [+]/[–]  
This keyboard automatically plays bass and chord parts in  
accordance with the chords you finger. The bass and chord  
parts are played using sounds and tones that are  
automatically selected to select the rhythm you are using. All  
of this means that you get full, realistic accompaniments for  
the melody notes you play with your right hand, creating the  
mood of an one-person ensemble.  
Š
You can also increment the displayed rhythm number by  
pressing [+] and decrement it by pressing [–].  
Playing a Rhythm  
Selecting a Rhythm  
Use the following procedure to start and stop rhythm play.  
This keyboard provides you with 100 exciting rhythms that  
you can select using the following procedure.  
To play a rhythm  
To select a rhythm  
1.  
2.  
Set the MODE switch to NORMAL.  
Press the START/STOP button to start play of  
the currently selected rhythm.  
1.  
2.  
Find the rhythm you want to use in the “Rhythm  
List” (page A-6) and note its rhythm number.  
3.  
To stop rhythm play, press the START/STOP  
button again.  
Press the RHYTHM button.  
Š
All of the keyboard keys are melody keys while the MODE  
switch is set to NORMAL.  
1
Indicator appears  
3.  
Use the number buttons to input the two digit  
rhythm number for the rhythm you want to  
select.  
Example:  
To select “76 RHUMBA”, input 7 and then 6.  
641A-E-023A  
E-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Accompaniment  
Adjusting the Tempo  
Using Auto Accompaniment  
The tempo (beats per minute) can be set to a value in the range  
of 40 to 255. The tempo value you set is used for Song Bank,  
3-step lesson, and Auto Accompaniment chord play, as well  
as playback from memory and metronome operation.  
The following procedure describes how to use the keyboard’s  
Auto Accompaniment feature. Before starting, you should  
first select the rhythm you want to use and set the tempo of  
the rhythm to the value you want.  
To set the tempo  
To use Auto Accompaniment  
1.  
Use the TEMPO buttons to set the tempo.  
: Increases the tempo value.  
1.  
2.  
3.  
Set the MODE switch to CASIO CHORD,  
FINGERED, or FULL RANGE CHORD.  
: Decreases the tempo value.  
Press the START/STOP button to start play of  
the currently selected rhythm.  
Play a chord.  
Š
The actual procedure you should use to play a  
chord depends on the current MODE switch  
position. Refer to the following pages for details  
on chord play.  
CASIO CHORD .................................. Page E-22  
FINGERED .......................................... Page E-23  
FULL RANGE CHORD ..................... Page E-24  
1
2
3
4
Flash  
Metronome  
Beat number  
Tempo value  
Š
Š
While the tempo value is flashing, you can also use the  
number buttons or [+] and [–] to input a three-digit value.  
Note that you must input leading zeros, so 90 is input as  
090.  
Pressing both the and TEMPO buttons at the same  
time automatically returns the currently selected rhythm to  
its default tempo.  
1
2
Chord name  
Basic Chord Form  
(The chord form that appears here may show  
notes that differ from those actually pressed on  
the keyboard.)  
4.  
To stop Auto Accompaniment play, press the  
START/STOP button again.  
CASIO CHORD  
This method of chord play makes it possible for anyone to  
easily play chords, regardless of previous musical knowledge  
and experience. The following describes the CASIO CHORD  
“Accompaniment keyboard” and “Melody keyboard”, and  
tells you how to play CASIO CHORDs.  
641A-E-024A  
E-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Accompaniment  
J
CASIO CHORD Accompaniment Keyboard and  
Melody Keyboard  
Š
It makes no difference whether you press black or white  
keys to the right of a major chord key when playing minor  
and seventh chords.  
FINGERED  
Š
The accompaniment keyboard can be used for playing  
chords only. No sound will be produced if you try playing  
single melody notes on the accompaniment keyboard.  
FINGERED provides you with a total of 15 different chord  
types. The following describes the FINGERED  
“Accompaniment keyboard” and “Melody keyboard”, and  
tells you how to play a C-root chord using FINGERED.  
Chord Types  
CASIO CHORD accompaniment lets you play four types of  
chords with minimal fingering.  
J
FINGERED Accompaniment Keyboard and  
Melody Keyboard  
Chord Types  
Major chords  
Example  
Major chord names are marked  
above the keys of the  
accompaniment keyboard. Note  
that the chord produced when  
you press an accompaniment  
keyboard does not change octave,  
regardless of which key you use  
to play it.  
Š
The accompaniment keyboard can be used for playing  
chords only. No sound will be produced if you try playing  
single melody notes on the accompaniment keyboard.  
Minor chords (m)  
To play a minor chord, keep the  
major chord key depressed and  
press any other accompaniment  
keyboard key located to the right  
of the major chord key.  
Seventh chords (7)  
To play a seventh chord, keep the  
major chord key depressed and  
press any other two  
accompaniment keyboard keys  
located to the right of the major  
chord key.  
Minor seventh chords (m7)  
To play a minor seventh chord,  
keep the major chord key  
depressed and press any other  
three accompaniment keyboard  
keys located to the right of the  
major chord key.  
641A-E-025A  
E-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Accompaniment  
FULL RANGE CHORD  
This accompaniment method provides a total of 38 different  
chord types: the 15 chord types available with FINGERED  
plus 23 additional types. The keyboard interprets any input of  
three or more keys that matches a FULL RANGE CHORD  
pattern to be a chord. Any other input (that is not a FULL  
RANGE CHORD pattern) is interpreted as melody play.  
Because of this, there is no need for a separate  
accompaniment keyboard, so the entire keyboard, from end  
to end, can be used for both melody and chords.  
J
FULL RANGE CHORD Accompaniment Keyboard  
and Melody Keyboard  
Chords Recognized by This Keyboard  
Chord Types  
Number of Types  
Corresponding  
FINGERED  
Chord  
15 (page E-23)  
See the “Fingered Chord Chart” on page A-4 for details on  
playing chords with other roots.  
23  
The following are examples of  
chords that use C as the bass note.  
*1. Inverted fingerings cannot be used. The lowest note is  
the root.  
*2. The same chord can be played without pressing the 5th  
G.  
Other Chords  
*1  
Š
Š
Except for the chords specified in note above, inverted  
fingerings (i.e. playing E-G-C or G-C-E instead of C-E-G)  
will produce the same chords as the standard fingering.  
*2  
Except for the exception specified in note above, all of the  
keys that make up a chord must be pressed. Failure to  
press even a single key will not play the desired  
FINGERED chord.  
Example:  
To play the chord C major.  
Any of the fingerings shown in the illustration below  
will produce C major.  
Š
When the key light system is turned on, the keys of the  
accompaniment keyboard light to show the chord you  
played. Though the chord is the same, the form of the  
chord (the keys that light) may differ from the one you used  
(the keys you pressed). If you play C Major using the  
inverted chord form E-G-C, for example, the keys for C-E-  
G will light.  
Š
As with the FINGERED mode (page E-23), you can play  
the notes that form a chord in any combination (1).  
641A-E-026A  
E-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Accompaniment  
Š
When the composite notes of a chord are separated by 6  
or more notes, the lowest sound becomes the bass (2).  
Using a Fill-in Pattern  
Music Example  
Fill-in patterns let you momentarily change the rhythm  
pattern to add some interesting variation to your  
performances.  
Tone: 016, Rhythm: 05, Tempo: 070  
The following procedure describes how to use the Fill-in  
feature.  
To insert a fill-in  
1.  
2.  
Press the START/STOP button to start rhythm  
play.  
Using an Intro Pattern  
Press the NORMAL/FILL-IN button to insert a  
fill-in pattern for the rhythm you are using.  
This keyboard lets you insert a short intro into a rhythm  
pattern to make startup smoother and more natural.  
The following procedure describes how to use the Intro  
feature. Before starting, you should first select the rhythm you  
want to use, and set the tempo.  
Š
The fill-in pattern does not play if you press the NORMAL/  
FILL-IN button while an intro pattern is playing.  
To insert an intro  
Using a Rhythm Variation  
1.  
Press the INTRO button to start the selected  
rhythm with an intro pattern.  
In addition to the standard rhythm pattern, you can also  
switch to a secondary “variation” rhythm pattern for a bit of  
variety.  
Š
With the above setup, the intro pattern is played  
and the auto accompaniment with intro pattern  
starts as soon as you play chords on the  
accompaniment keyboard.  
To insert the variation rhythm pattern  
Š
Š
The standard rhythm pattern starts to play after the intro  
pattern is complete.  
1.  
2.  
Press the START/STOP button to start rhythm  
play.  
Pressing the VAR/FILL-IN button while an intro pattern is  
playing causes the variation pattern to sound after the intro  
pattern is complete.  
Press the VAR/FILL-IN button to switch to the  
variation pattern for the rhythm you are using.  
Š
Pressing the SYNCHRO/ENDING button while an intro  
pattern is playing causes the ending pattern to sound after  
the intro pattern is complete.  
Š
To switch back to the standard rhythm pattern, press the  
NORMAL/FILL-IN button.  
641A-E-027A  
E-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Accompaniment  
2.  
Play a chord and the rhythm pattern starts to  
play automatically.  
Using a Fill-in Pattern with a  
Variation Rhythm  
Š
Š
If the MODE switch is set to NORMAL, only the rhythm  
plays (without a chord) when you play on the  
accompaniment keyboard.  
You can also insert a fill-in pattern while a variation rhythm  
pattern is playing.  
If you press the INTRO button before playing anything on  
the keyboard, the rhythm starts automatically with an intro  
pattern when you play something on the accompaniment  
keyboard.  
To insert a fill-in into a rhythm variation  
Š
Š
Pressing the VAR/FILL-IN button before playing anything  
on the keyboard causes play to start with the variation  
pattern when something is played on the keyboard.  
1.  
While a variation rhythm pattern is playing,  
press the VAR/FILL-IN button to insert a fill-in  
pattern for the variation rhythm you are using.  
To cancel synchro start standby, press the SYNCHRO/  
ENDING button one more time.  
Synchro Starting  
Accompaniment with Rhythm  
Play  
Finishing with an Ending  
Pattern  
You can end your performances with an ending pattern that  
brings the rhythm pattern you are using to a natural-  
sounding conclusion.  
You can set up the keyboard to start rhythm play at the same  
time you play the accompaniment on the keyboard.  
The following procedure describes how to use synchro start.  
Before starting, you should first select the rhythm you want to  
use, set the tempo, and use the MODE switch to select the  
chord play method you want to use (NORMAL, CASIO  
CHORD, FINGERED, FULL RANGE CHORD).  
The following procedure describes how to insert an ending  
pattern. Note that the actual ending pattern played depends  
on the rhythm pattern you are using.  
To finish with an ending pattern  
To use synchro start  
1.  
While the rhythm is playing, press the  
SYNCHRO/ENDING button.  
1.  
Press the SYNCHRO/ENDING button to put the  
keyboard into synchro start standby.  
Š
This causes the ending pattern to play which  
brings rhythm accompaniment to an end.  
Š
The timing when the ending pattern starts  
depends on when you press the SYNCHRO/  
ENDING button. If you press the button before  
the second beat of the current measure, the  
ending pattern starts playing immediately.  
Pressing the button at any point in the measure  
after the second beat results in the ending pattern  
playing from the beginning of the following  
measure.  
1
Flash  
641A-E-028A  
E-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Accompaniment  
Adjusting the Accompaniment  
Volume  
You can adjust the volume of the accompaniment parts as a  
value in the range of 000 (minimum) to 127.  
1.  
Press the ACCOMP VOLUME button.  
1
Current accompaniment volume setting  
2.  
Use the number buttons or the [+]/[–] buttons to  
change the current volume setting value.  
Example:  
110  
Š
Š
The current accompaniment volume value that appears in  
Step 1 automatically clears from the display if you do not  
input anything within about five seconds.  
Pressing [+] and [–] buttons at the same time automatically  
sets an accompaniment volume of 088.  
641A-E-029A  
E-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Song Bank  
Song Bank  
1
4
7
SONG BANK  
2
5
8
TONE  
3
6
9
DEMO  
TEMPO  
REW  
Number buttons  
STOP  
START/STOP  
PLAY/PAUSE  
bk FF  
bl [+]/[–]  
This keyboard features a built-in Song Bank of 100 tunes that  
can be used for Auto Accompaniment playback. You can  
select a song simply to enjoy listening to it, or you can cut out  
its melody part and play along on the keyboard using the 3-  
step lesson. Melody and accompaniment fingerings and notes  
appear on the keyboard’s display, and the keys you should  
press light up on the keyboard to help you on your way to  
keyboard mastery.  
Playing a Tune  
To play a tune  
1.  
2.  
Select the tune you want to play.  
Press the PLAY/PAUSE button to start play of  
the tune.  
Selecting a Tune  
Š
The current measure and beat numbers are  
shown on the display.  
To select a tune  
1.  
2.  
Find the tune you want to play in the Song Bank  
List, and note its number.  
Press the SONG BANK button.  
Š
This causes the number and name of the  
currently selected Song Bank tune to appear on  
the display.  
1
2
Measure number  
Beat number  
3.  
Use the number buttons to input the two-digit  
tune number.  
3.  
To stop play, press the STOP button.  
Š
The tune you select continues to play until you  
stop it.  
Example:  
To select “16 TWINKLE TWINKLE LITTLE  
STAR”, input 1 and then 6.  
Š
While a tune is playing, you can use the number buttons or  
[+] and [–] to change to another tune. The change is made  
as soon as you input a different number, even if the current  
tune is not finished playing.  
Š
You can also change the displayed song number using [+]  
(increase) and [–] (decrease).  
641A-E-030A  
E-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Song Bank  
Key Lighting System Operation and Display  
Contents During Song Bank Play  
Š
While the tempo value is flashing, you can also use the  
number buttons or [+] and [–] to input a three-digit value.  
Note that you must input leading zeros, so 90 is input as  
090.  
Keyboard keys light to show the keys that should be pressed  
to play along with Song Bank tunes as they play back. At the  
same time, the display shows fingerings, chord names, notes,  
tempo and other information.  
Š
Š
Pressing both the and TEMPO buttons at the same  
time automatically returns the currently selected tune to its  
default tempo.  
Tunes 70 to 99 have tempo changes part way through in  
order to produce specific musical effects. Note that the  
tempo setting automatically returns to the default whenever  
a tempo change occurs within one of these tunes.  
Pausing Playback  
To pause playback  
1
2
3
4
5
6
7
Chord name  
Tempo value  
Measure number  
Beat number  
Fingering  
1.  
2.  
Press the PLAY/PAUSE button while a tune is  
playing to pause it.  
Pressing the PLAY/PAUSE button again  
resumes play from the point where it was  
paused.  
Dynamic mark  
Note pitch  
Adjusting the Tempo  
Š
After you press the STOP button to stop playback, pressing  
the PLAY/PAUSE button restarts play from the beginning  
of the tune.  
Each tune has a preset default tempo (beats per minute) that  
is set automatically whenever you select a tune. While the  
tune is playing, you can change the tempo setting to a value  
in the range of 40 to 255.  
To set the tempo  
1.  
Use the TEMPO buttons to set the tempo.  
: Increases the tempo value.  
: Decreases the tempo value.  
1
2
Flash  
Tempo value  
641A-E-031A  
E-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Song Bank  
Fasting Reverse  
To fast reverse  
1.  
While a tune is playing or paused, hold down  
the REW button to skip in a reverse direction at  
high speed.  
1
2
Measure number  
Beat number  
Š
The fast reverse operation skips back one  
measure at a time.  
2.  
Releasing the FF button starts song playback  
from the measure whose number is shown on  
the display.  
Š
The measure and beat numbers on the display  
change while the fast reverse operation is being  
performed.  
Š
Fast forward does not work while Song Bank play is  
stopped.  
Changing the Melody Tone  
1
2
Measure number  
Beat number  
To change the melody tone  
2.  
Releasing the REW button starts song playback  
from the measure whose number is shown on  
the display.  
1.  
While a tune is playing or paused, press the  
TONE button.  
Š
Fast reverse does not work while Song Bank play is  
stopped.  
1
Indicates TONE was pressed.  
2.  
Find the tone you want in the Tone List, and  
then use the number buttons to input its three-  
digit number.  
Fasting Forward  
Example:  
To select “040 VIOLIN”, input 0, then 4, then 0.  
To fast forward  
Š
You can select any one of the keyboard’s 137  
built-in tones.  
1.  
While a tune is playing or paused, hold down  
the FF button to skip forward at high speed.  
Š
The fast forward operation skips forward one  
measure at a time.  
Š
The measure and beat numbers on the display  
change while the fast forward operation is being  
performed.  
Š
Š
You can also use the [+] and [–] buttons to change the  
melody tones.  
For two-hand tunes (Song Bank tunes 70 through 99), the  
same tone is applied for both the left and right hand parts.  
641A-E-032A  
E-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Song Bank  
Š
Specifying the tune number for the same tune that is  
currently selected returns the melody tone to the default  
setting for that tune.  
Playing All Song Bank Tunes in  
Succession  
To play all Song Bank tunes in succession  
1.  
2.  
Press the DEMO button.  
Š
Song Bank tune play starts from tune number 00,  
and continues with each tune in numeric  
sequence.  
To stop Song Bank tune play, press the DEMO,  
STOP, or START/STOP button.  
Š
Š
While a tune is playing, you can use the number buttons or  
[+] and [–] to change to another tune.  
You can play along with the tunes on the keyboard.  
641A-E-033A  
E-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Bissell Vacuum Cleaner 29L6 User Manual
Bosch Appliances Security Camera LTC 9449 User Manual
Bosch Power Tools Nail Gun BNS200 18 User Manual
Bose Speaker 10 Series IV User Manual
Brother Printer PT 2100 User Manual
Canon Photo Printer CP720 User Manual
Canon Printer 6221B030 User Manual
Carver Speaker System carver subwoofer User Manual
Chief Manufacturing Projector Accessories EVCM 100D User Manual
Cisco Systems Network Card SLM224G4PS User Manual