®
Brother One-Year Limited Warranty and Replacement Service
(USA Only)
Who is covered:
• This limited warranty ("warranty") is given only to the original end-use/retail purchaser (referred
to in this warranty as "Original Purchaser") of the accompanying product, consumables and
accessories (collectively referred to in this warranty as "the machine").
• If you purchased a product from someone other than an authorized Brother reseller in
the United States or if the product was used (including but not limited to floor models
or refurbished product), prior to your purchase you are not the Original Purchaser and
the product that you purchased is not covered by this warranty.
What is covered:
• The machine includes a Machine and Consumable and Accessory Items. Consumable
and Accessory Items include but are not limited to label cassettes, cutters, stamps,
power adapters, cases and batteries.
• Except as otherwise provided herein, Brother warrants that the Machine and the
accompanying Consumable and Accessory Items will be free from defects in materials
and workmanship, when used under normal conditions.
• This warranty applies only to products purchased and used in the United States. For
products purchased in, but used outside, the United States, this warranty covers only
warranty service within the United States (and does not include shipping outside the
United States).
What is the length of the Warranty Periods:
• Machines: one year from the original purchase date.
• Accompanying Consumable and Accessory Items: 90 days from the original purchase
date or the rated life of consumable, whichever comes first.
What is NOT covered:
This warranty does not cover:
(1) Physical damage to the machine;
(2) Damage caused by improper installation, improper or abnormal use, misuse, neglect or
accident (including but not limited to transporting the machine without the proper
preparation and/or packaging);
(3) Damage caused by another device or software used with the machine (including but not
limited to damage resulting from use of non Brother®-brand parts and Consumable and
Accessory Items);
(4) Consumable and Accessory Items that expired in accordance with a rated life; and,
(5) Problems arising from other than defects in materials or workmanship.
This limited warranty is VOID if the machine has been altered or modified in any way
(including but not limited to attempted warranty repair without authorization from
Brother and/or alteration/removal of the serial number).
What to do if you think your Product is eligible for warranty service:
Report your issue to our P-touch Customer Service Hotline at 1-877-478-6824 or to a
Brother Authorized Service Center within the applicable warranty period. Supply
Brother or the Brother Authorized Service Center with a copy of your dated bill of sale
showing that the machine was purchased within the U.S. For the name of local Brother
Authorized Service Center(s), call 1-800-521-2846.
What Brother will ask you to do:
After contacting Brother or a Brother Authorized Service Center, you may be required
to deliver (by hand if you prefer) or send the Product properly packaged, freight pre-
paid, to the Authorized Service Center together with a photocopy of your bill of sale.
You are responsible for the cost of shipping, packing product, and insurance (if
you desire). You are also responsible for loss or damage to the machine in ship-
ping.
Download from Www.Somanuals.com. All Manuals Search And Download.
What Brother will do:
If the problem reported concerning your Machine and/or accompanying Consumable
and Accessory Items is covered by this warranty and if you first reported the problem to
Brother or an Authorized Service Center within the applicable warranty period, Brother
or its Authorized Service Center will repair or replace the Machine and/or accompany-
ing Consumable and Accessory Items at no charge to you for parts or labor. The deci-
sion as to whether to repair or replace the Machine and/or accompanying Consumable
and Accessory Items is made by Brother in its sole discretion.
Brother reserves the right to supply a refurbished or remanufactured replacement
Machine and/or accompanying Consumable and Accessory Items and use refurbished
parts provided such replacement products conform to the manufacturer's specifications
for new product/parts.
The repaired or replacement Machine and/or accompanying Consumable and Acces-
sory Items will be returned to you freight prepaid or made available for you to pick up at
a conveniently located Authorized Service Center.
If the Machine and/or accompanying Consumable and Accessory Items are not cov-
ered by this warranty (either stage), you will be charged for shipping the Machine and/
or accompanying Consumable and Accessory Items back to you and charged for any
service and/or replacement parts/products at Brother's then current published rates.
The foregoing are your sole (i.e., only) and exclusive remedies under this war-
ranty.
What happens when Brother elects to replace your Machine:
When a replacement Machine is authorized by Brother, and you have delivered the
Machine to an Authorized Service Center, the Authorized Service Center will provide
you with a replacement Machine after receiving one from Brother. If you are dealing
directly with Brother, Brother will send to you a replacement Machine with the under-
standing that you will, after receipt of the replacement Machine, supply the required
proof of purchase information, together with the Machine that Brother agreed to
replace. You are then expected to pack the Machine that Brother agreed to replace in
the package from the replacement Machine and return it to Brother using the pre-paid
freight bill supplied by Brother in accordance with the instructions provided by Brother.
Since you will be in possession of two machines, Brother will require that you provide a
valid major credit card number. Brother will issue a hold against the credit card account
number that you provide until Brother receives your original Product and determines
that your original Product is entitled to warranty coverage. Your credit card will be
charged up to the cost of a new Product only if: (i) you do not return your original Prod-
uct to Brother within five (5) business days; (ii) the problems with your original Product
are not covered by the limited warranty; (iii) the proper packaging instructions are not
followed and has caused damage to the product; or (iv) the warranty period on your
original Product has expired or has not been sufficiently validated with a copy of the
proof of purchase (bill of sale). The replacement Machine you receive (even if refur-
bished or remanufactured) will be covered by the balance of the limited warranty period
remaining on the original Product, plus an additional thirty (30) days. You will keep the
replacement Machine that is sent to you and your original Machine shall become the
property of Brother. Retain your original Accessory Items and a copy of the return
freight bill, signed by the courier.
Download from Www.Somanuals.com. All Manuals Search And Download.
Limitations:
Brother is not responsible for damage to or loss of any equipment, media, programs or
data related to the use of the machine. Except for that repair or replacement as
described above, Brother shall not be liable for any direct, indirect, incidental or conse-
quential damages or specific relief. Because some states do not allow the exclusion or
limitation of consequential or incidental damages, the above limitation may not apply to
you.
THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, WRITTEN OR
ORAL, WHETHER EXPRESSED BY AFFIRMATION, PROMISE, DESCRIPTION,
DRAWING, MODEL OR SAMPLE. ANY AND ALL WARRANTIES OTHER THAN THIS
ONE, WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED.
• This Limited Warranty is the only warranty that Brother is giving for the machine. It is
the final expression and the exclusive and only statement of Brother's obligations to
you. It replaces all other agreements and understandings that you may have with
Brother or its representatives.
• This warranty gives you certain rights and you may also have other rights that may
vary from state to state.
• This Limited Warranty (and Brother's obligation to you) may not be changed in any way
unless you and Brother sign the same piece of paper in which we (1) refer to the
machine and your bill of sale date, (2) describe the change to this warranty and (3)
agree to make that change.
Important:
We recommend that you keep all original packing materials, in the event that you ship
the machine.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
Should you have questions, or need information about
your Brother Product, we have a variety of support
options for you to choose from:
USA-Customer Service:
Customer Service
877-478-6824 (voice)
Customer Service
877-4-PTouch (voice)
Customer Service
901-379-1210 (fax)
Customer Service
custsrv@brother.com (Email)
Automated Faxback
800-521-2846
World Wide Web
www.brother.com
Supplies / Accessories
www.brothermall.com
or 888-879-3232
BROTHER INTERNATIONAL CORPORATION
100 SOMERSET CORPORATE BLVD.
BRIDGEWATER, NEW JERSEY 08807-0911
Please record your model and serial number and your
date and location of Purchase below for your records.
Keep this information with your proof of purchase (bill
of sale) in case your Product requires service.
Model # __________________________________________________
Serial #___________________________________________________
Date of purchase:___________________________________________
Store where purchased:______________________________________
Location of store: ___________________________________________
Important: We recommend that you keep all original
packing materials, in the event you ship this product.
Save Time - Register On-Line!
Don’t stand in line at the post office or worry about lost mail. Visit us on-line at
www.registermybrother.com
Your product will immediately be registered in our database and you can be on your way!
Also, while you're there, look for contests and other exciting information!
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
LCD Display.......................................................................................................... 14
Language.............................................................................................................. 24
1
2
3
4
5
6
7
Entering and Editing Text............................................................................................ 25
Entering Text from the Keyboard.......................................................................... 25
Inserting a Tab...................................................................................................... 26
Entering Symbols Using Key ............................................................................... 27
8
9
1
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Setting Character Attributes.........................................................................................31
Setting Character Attributes by Label....................................................................31
Setting Character Attributes by Each Line.............................................................31
Font & Size Options .......................................................................................32
Width & Style Options ....................................................................................33
Setting Label Attributes................................................................................................35
Setting Bar Code Parameters................................................................................45
Printing Multiple Copies.........................................................................................50
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages........................................................................................................... 65
9. INDEX................................................................................................ 71
1
2
3
4
5
6
7
8
9
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you for purchasing the P-touch labeler PT-2100/2110.
Your new P-touch labeler is an easy to operate, feature packed labeling system that
makes creating professional, high quality labels a breeze. In addition to easy label
creation via pre-formatted label layouts, the P-touch labeler editing software features
advanced label formatting, block formats, bar codes and auto-numbering functions.
What You Can Do
„
Create a label with the P-touch labeler
Prepare the P-touch labeler.
1
Install the batteries
and/or connect the AC
adapter.
Set a tape cassette.
Turn the P-touch
labeler on.
Enter the label text.
2
Enter the label text from the keyboard.
In addition to entering text, the P-touch
labeler has a large range of editing
functions.
"Create labels like these"
Print the label.
3
Print the label you have created.
You can check the layout of your label
before printing.
Checking the label preview before
printing prevents wasting tape on
incomplete labels.
"Preview function"
What You Can Do
4
Download from Www.Somanuals.com. All Manuals Search And Download.
„
Create a label with your personal computer
Prepare the P-touch labeler. (Refer to step 1 in the previous section.)
1
Prepare the personal computer. *(USB cable not included with the purchase of PT-2100.)
2
Install the software.
*Connect the USB
cable.
Turn the P-touch
labeler on.
Software Installation Guide
Software Installation Guide
Enter the label text using P-touch Quick Editor.
3
4
Start P-touch Quick
Editor.
Enter the label text in P-touch Quick Editor.
Click on the layout
area and then type
"Brother".
Software Help
Software Help
Print the label.
Click on the "Print"
button.
The label is printed.
1
2
3
4
5
6
7
Software Help
Software Help
There is two types of Editing software provided with this product. First there is the P-touch Quick
Editor (simple label editing software) is ideal for creating simple labels. Than there is the P-touch
Editor (full featured label editing software) that can create labels with more complex designs.
"P-touch Editor"
"Create labels with complex designs like these"
8
9
What You Can Do
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Safety Precautions
To prevent injury and damage, important notes are explained using various symbols.
The symbols and their meanings are as follows:
Tells you what to do to avoid the risk of injury.
WARNING
Tells you about procedures you must follow to prevent damage to
the P-touch.
CAUTION
The symbols used in this manual are as follows:
DO NOT disassemble the
Action NOT allowed to do
product.
DO NOT splash the product
DO NOT touch a given
with or immerse the product in
portion of the product.
water.
Mandatory action
Safety alert
Unplugging
Alerts to the possibility of
electrical shock
Safety Precautions
6
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
AC adapter
Follow these guidelines to avoid fire, damage, electric shock, or failure.
Use only the AC adapter (AD-24)
designed exclusively for your P-touch.
Failure to observe this may result in an
accident or damage. Brother shall not
assume any responsibility for any
accident or damage resulting from not
using the specified AC adapter.
Unplug the power cord immediately
and stop using the machine during an
electrical storm. There may be a
remote risk of electric shock from
lightning.
Do not use the AC adapter in places
of high humidity such as bathrooms.
Do not use a damaged power cord.
Do not overload the power outlet.
Do not place heavy objects on,
damage or modify the power cord or
plug. Do not forcibly bend or pull the
power cord.
Do not drop, hit or otherwise damage
the AC adapter.
Do not touch the AC adapter or power
plug with wet hands.
Make sure that the plug is fully
inserted to the power outlet. Do not
use an outlet that is loose.
Battery
Follow these guidelines to avoid liquid leakage, heat, rupture of the battery.
Do not use metallic articles, such as
tweezers or a metallic pen, when
exchanging the batteries.
Do not throw into fire, heat up, or
disassemble the battery.
1
2
3
4
5
6
7
8
9
Safety Precautions
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
P-touch
WARNING
Follow these guidelines to avoid fire, damage, electric shock, and choking.
Do not allow the P-touch to get wet in
any way.
Do not disassemble the P-touch. For
inspection, adjustment, and repair of
the P-touch, contact the retail outlet
where the P-touch was purchased or
your local authorized service center.
Dispose of plastic bags correctly and
keep away from babies and children.
Do not wear or play with plastic bags.
Disconnect the AC adapter and
remove batteries immediately and
stop using when you notice abnormal
odor, heat, discoloration, deformation
or anything unusual while using or
storing it.
Do not touch any metal parts near the
print head. The print head becomes
very hot during use and remains very
hot immediately after use. Do not
touch it directly with your hands.
Print head
Do not drop, hit or otherwise bang the
P-touch.
Do not use the P-touch with a foreign
object in it. If water, metallic
substance or any foreign object
enters the P-touch, disconnect the
AC adapter and remove batteries,
and contact the retail outlet where the
P-touch was purchased or your local
authorized service center.
Safety Precautions
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Tape Cutter
Follow these guidelines to avoid personal injury and damage of the P-touch.
Do not touch the blade of the cutter
unit.
Do not open the tape compartment
cover when operating the cutter unit.
Do not apply excessive pressure to
the cutter unit.
AC adapter
Be sure to disconnect the AC adapter
from the power outlet and the P-touch
when not using the P-touch for any
extended period of time.
Always hold the plug when
disconnecting the power cord from
the power outlet.
Battery
Follow these guidelines to avoid liquid leakage, heat, rupture of the battery.
Do not use old and new batteries
together.
Do not set the positive and negative
end in the wrong position.
Do not mix alkaline batteries with
other type batteries.
Remove the batteries if you do not
intend to use the P-touch for an
extended period of time.
1
P-touch
Follow these guidelines to avoid personal injury and damage of the P-touch.
2
3
4
5
6
7
Place the P-touch on a flat, stable
surface such as a desk.
Do not place any heavy objects on top
of the P-touch. Do not press on the
LCD display.
Tape
Depending on the location, material, and environmental conditions, the label may
unpeel or become irremovable, the color of the label may change or be transferred
to other objects.
Before applying the label, check the environmental condition and the material.
Memory
Any data stored in memory will be lost due to failure or repair of the P-touch, or if
the battery expires.
When power is disconnected for more than two minutes, all text and format
8
9
settings will be cleared. Any text files stored in the memory will also be cleared.
Safety Precautions
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
General Precautions
• Do not use the P-touch labeler in any way or for any purpose not described in this guide.
Doing so may result in accidents or damage the machine.
• Use only Brother TZ tapes with this machine. Do not use tapes that do not have the
mark.
• Do not pull or press on the tape in the cassette.
• Do not put any foreign objects into the tape exit slot, AC adapter connector, or USB port,
etc.
• Do not try to print labels using an empty tape cassette or without a tape cassette set in the
P-touch labeler. Doing so will damage the print head.
• Do not touch the print head with your fingers.
• Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry cloth.
• Do not place the P-touch labeler in direct sunlight, near heaters or other hot appliances,
in any location exposed to extremely high or low temperatures, high humidity, or dusty
locations. Standard operating temperature range: 50°F to 95°F.
• It is recommended that you use the USB cable supplied with the P-touch labeler. (USB
cable not included with the purchase of PT-2100.) Should another USB cable need to be
used, ensure it is of high quality construction.
• Be careful not to scratch the CD-ROM. Do not place the CD-ROM in any location exposed
to high or low temperatures. Do not place heavy objects on the CD-ROM or bend it.
• The software on the CD-ROM is intended for use with the P-touch labeler and may be
installed on more than one PC.
• We strongly recommend that you read this User’s Guide carefully before using your
P-touch labeler, and then keep it nearby for future reference.
Symbols Used in this Guide
The following symbols are used throughout this guide to indicate additional information.
This symbol indicates information or directions that may result in damage or
injury if ignored, or operations that will result in errors.
:
This symbol indicates information or directions that may help you understand
and use the P-touch labeler more efficiently.
:
General Precautions
10
Download from Www.Somanuals.com. All Manuals Search And Download.
This section provides quick and easy access to
Simply look for your task below and then go to
the page indicated.
If the task you are looking for is not shown here,
try the Contents or Index pages.
information on tasks often needed by users.
InQduicek x
ABC
ABC
To enter text, symbols
and accent characters...
To change the label
format...
To change the cutting
and margin settings
Entering
text/symbols/accent
characters
Text/Label format
functions
Tape cutting options
1
auto-format
function
2
3
4
5
6
7
1
2
3
ABC
To make formatted
label easily...
To print multiple
copies (with auto-
numbering)...
To save a label
layout...
Multiple copy/auto-
numbering functions
Auto-Format function
File memory function
8
9
Download from Www.Somanuals.com. All Manuals Search And DownloaQdu.ick Index
11
GETTING STARTED
Unpacking Your P-touch labeler
Check that the package contains the following before using your P-touch labeler.
P-touch labeler PT-2100
TZ tape cassette
(Starter Cassette)
CD-ROM
USB cable
(Drivers, Labeling Editing Software
(USB cable not included with the
packages)
purchase of PT-2100.)
AD-24
User’s Guide
Software Installation Guide
UnpackinDg Yoowunr Plo-taoudchfrloambeleWr ww.Somanuals.com. All Manuals Search And Download.
12
General Description
Tape compartment cover
Tape viewer
Tape cassette compartment
Tape exit slot
LCD display
Keyboard
Tape cutter
Release
lever
Print head
When shipped from the factory, the Tape compartment cover and the LCD display
are covered with a protective sheet to prevent damage. Remove this sheet before
using the P-touch.
Battery compartment
cover
AC adapter connector
1
2
3
4
5
6
7
Battery case
USB port
8
9
Download from Www.Somanuals.com. All Manuals Search And DoGwennleoraaldD.escription
13
GETTING STARTED
LCD Display & Keyboard
LCD Display
4
5
6
7
8
9
10
1
2
3
1. Line number
Displayed at the beginning of each line, this mark indicates the line number within
the label layout.
2. Cursor
Indicates the current position of the cursor. New characters are entered to the left of
the cursor, and the character to the left of the cursor is deleted when the
key is
pressed.
3. Return mark
Indicates the end of a line of text.
4. Caps mode
Indicates that the Caps mode is on.
5.~8. Style guidance
Indicates the current font (5), character size (6), character style (7) and frame (8)
settings.
9. Tape length
Indicates the approximate length of the label with the text entered presently in the
machine.
10.Cursor selection
Indicates that you can use the cursor keys to select the items on the screen. Use
the
and
keys to select a menu item, and the
and
keys to change the
setting.
LCD DispDlayow& nKeloybaodarfdrom Www.Somanuals.com. All Manuals Search And Download.
14
Key Names and Functions
7
8
9
10 11
1
2
4
3
5
6
12
13
14
15
17
18
15
16 19
20 21 22
5.
• Prints the current label design onto the
tape.
1.
2.
(Power):
Turns the P-touch labeler on and off.
):
Moves the cursor in the direction of the
arrow when entering or editing
:
(
• Opens the Print Options menu when
used in combination with the
1
key.
6.
:
characters, entering symbols or
2
3
4
5
6
7
accented characters, and when setting • Displays a preview of the label.
label attributes in the function menus.
• Feeds 0.92" (23 mm) of blank tape and
then automatically cuts the tape when
used in combination with the
3.
4.
:
key.
Selects the option displayed when
setting label attributes in the function
menus, or when entering symbols or
accented characters.
7.
:
Opens the File menu, where you can
Print, Save, Open, or Delete the
frequently used labels in the file
memory.
(Escape):
Cancels the current command and
returns the display to the data entry
screen or the previous step.
8
9
LCD Display & Keyboard
Download from Www.Somanuals.com. All Manuals Search And Download.
15
GETTING STARTED
8.
:
17.
(Backspace):
• Opens the Text menu, where you can
set character attributes for the label.
• Deletes the character to the left of the
cursor.
• Character attributes can be set to each • Clears all text entered, or all text and
line of the label when the Text menu is
opened in combination with the
key.
current label settings when used in
combination with the key.
18.
• Enters a new line when entering text.
:
9.
:
Opens the Label menu, where you can • Enters a new block when used in
set label attributes for the label. combination with the key.
10. 19. (Auto-Format):
:
Opens the Setup menu, where you can
set operating preferences for the
P-touch labeler.
Opens the Auto-Format menu, where
you can create labels using pre-defined
templates or block formats.
11.
Clears all text, text entered and current • Enters a blank space.
label settings. • Returns a setting to the default value.
12. 21.
:
20.
:
~
:
:
• Use these keys to type letters or
numbers.
• Opens the Bar code Input screen for
entering the bar code data.
• Uppercase letters and symbols can be
• Opens the Bar code Setup screen for
entered using these keys in combination
setting bar code parameters when used
with the
13.
or
keys.
in combination with the
22.
key.
:
:
Inserts a tab to the position of the cursor
in the text entry screen.
Use this to select and enter an accented
character.
14.
:
Turns the Caps mode on and off. When
the Caps mode is on, uppercase letters
can be entered by simply pressing a
character key.
15.
:
Use this key in combination with the
letter and number keys to type
uppercase letters or the symbols
indicated on the number keys.
16.
:
Use this to select and enter a symbol
from a list of available symbols.
LCD DispDlayow& nKeloybaodarfdrom Www.Somanuals.com. All Manuals Search And Download.
16
Power Supply
Battery
Turn the P-touch labeler over and remove the
battery compartment cover. If the batteries are
already in the machine, remove them.
1
If you are replacing the batteries please ensure
that the labeler is turned off prior to opening
the battery compartment.
Insert six new AA-size alkaline batteries (LR6),
making sure that the positive (+) and negative (-)
ends of the batteries match the positive (+) and
negative (-) marks inside the battery compartment.
2
23
Always replace all six batteries at the same
time using brand new ones.
Attach the battery compartment cover by inserting
the three hooks at the bottom into the slots on the
machine, then pushing down firmly until it snaps
into place.
3
1
2
3
4
5
6
7
CAUTION
If you do not intend to use the P-touch labeler for an extended period of time it is
recommended that the batteries be removed.
8
9
Power Supply
17
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
AC Adapter
Connect the AC adapter directly to the P-touch labeler.
Insert the plug on the AC adapter cord into the connector marked DC IN 9-9.5V
on the P-touch labeler.
1
Insert the AC adapter plug into a standard electrical outlet.
2
Remove the batteries if you do not intend to use the P-touch for an extended period of time.
• Turn the P-touch labeler off before disconnecting the AC adapter.
• Do not pull or bend the AC adapter cord.
To safe guard and backup the labeler's memory, when the AC adapter is unplugged it is
recommended to have AA-size alkaline batteries (LR6) installed into the machine.
WARNING
• Use only the adapter (AD-24), which is designed exclusively for your P-touch.
Failure to observe this may result in an accident or damage. Brother shall not
assume any responsibility for any accident or damage resulting from not using the
specified AC adapter.
• Do not connect the AC adapter to a non-standard electrical outlet. Failure to
observe this may result in an accident or damage. Brother shall not assume any
responsibility for any accident or damage resulting from not using a standard
electrical outlet.
CAUTION
• Disconnect the AC adapter from the P-touch and electrical outlet when you do not
intend to use the P-touch for an extended period.
• When power is disconnected for more than two minutes, all text and format settings
will be cleared. Any text files stored in the memory will also be cleared.
Power Supply
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting a Tape Cassette
This P-touch labeler accepts tape cassettes of 9/64", 1/4", 3/8", 1/2" or 3/4" (3.5mm,
6mm, 9mm, 12mm, or 18mm) width.
• If the new tape cassette has a cardboard stopper, be sure to
remove the stopper before inserting the cassette.
• If the ink ribbon is loose, use your finger to wind the toothed
wheel in the direction of the arrow as shown on the tape cassette.
Check that the end of the tape is not bent and
that it passes through the tape guide.
If the tape is not passed through, pass it
through the tape guide referring to the
illustration.
End of tape
1
2
Tape guide
1
Ensure that the P-touch labeler is powered off, then
lift open the tape compartment cover. If there is
already a tape cassette installed in the machine,
remove it by lifting the tape cassette straight up.
2
3
4
5
6
7
8
9
Inserting a Tape Cassette
Download from Www.Somanuals.com. All Manuals Search And Download.
19
GETTING STARTED
Insert the tape cassette by lowering it
3
into the tape compartment, with the
end of the tape facing the machine's
tape exit slot. Press firmly down on the
tape cassette until you hear a click.
When inserting the tape cassette,
make sure that the tape and ink
ribbon do not catch on the print head.
Tape exit slot
Close the tape compartment cover.
4
Make sure that the release lever is up
when closing the tape compartment
cover. The tape compartment cover
cannot be closed if the release lever is
pressed down.
Release lever
• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape
cassette. Refer to “Feeding Tape” on page 22.
• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon
to be discharged with the tape.
• Store tape cassettes in a cool dark location, away from direct sunlight and high temperature,
high humidity, or dusty locations. Use the tape cassette as quickly as possible after opening
the sealed package.
Inserting a Tape Cassette
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning Power On/Off
Press the
Press the
key to turn the P-touch labeler on.
key again to turn the P-touch labeler off.
• Your P-touch labeler has a power saving function that automatically turns itself off if there is
no keys pressed within a certain time under certain operating conditions. Refer to the Auto
Power-Off Time table below for details.
• If the batteries are installed or the P-touch labeler is connected to an electrical outlet by the
AC adapter, the previous session’s information is maintained and will displayed when the
power is turned on.
zAuto Power-Off Timez
P-touch labeler only
Connected to PC
With AC adapter /
With battery
5 minutes
60 minutes
1
2
3
4
5
6
7
8
9
Turning Power On/Off
21
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Feeding Tape
Feed & Cut
This function will advance the tape approximately 0.92" (23 mm) and then cut the tape,
resulting in a blank label. This action maybe needed when installing a new tape
cassette to remove a bend in the tape and or ensure correct feeding of the tape.
Hold down the
"Feed & Cut?" will appear on the LCD display.
key and press the
key.
1
2
Using the or select the "Feed & Cut" option and then press either
The message "Feeding Tape... Please Wait" appears while the tape is fed, and
then the tape is cut.
or
.
To exit or cancel this function press
.
Feed Only
This function will advance the tape approximately 0.92" (23 mm) resulting in a blank
label sticking out the tape cassette. This action is recommended when using Fabric and
Extra Strength Adhesive tapes, which should be cut using scissors.
Hold down the
"Feed & Cut?" will appear on the LCD display.
key and press the
key.
1
2
Using the or select the "Feed Only" option and then press either
The message "Feeding Tape... Please Wait" appears while the tape is fed.
or
.
To exit or cancel this function press
.
Feeding Tape
22
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Display
LCD Contrast
This function allows the user to adjust the contrast setting of the LCD display to make
the screen easier to read. There are five levels from Dark (+2) to Light (-2) the factory
default setting is “0”.
Press the
“LCD Contrast” using the
the or key.
key to display the Setup menu, select
1
2
3
or key, and then press
Select a contrast level using the
The screen contrast changes each time you press the
or
key.
or
key, allowing you to set the most suitable
contrast.
Press the
or
key.
• Press the
• Pressing the
“0”.
key to return to the previous step.
while in the contrast function will return the setting to the default of
1
2
3
4
5
6
7
8
9
LCD Display
23
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Setting Language and Unit
Language
Select the language ("English", "Español", "Français", "Italiano", "Magyar", "Nederlands",
"Norsk", "Poliski", "Português", "Suomi", "Svenska", "
menu commands and messages shown on the LCD display.
The default setting is "English".
","Dansk" or "Deutsch") for
Press the
"Language" using the or key, and then press the
or key.
key to display the Setup menu, select
1
2
3
Select a language using the
or
key.
Press the
or
key.
Press the
key to return to the previous step.
Unit
Select the units ("inch" or "mm") for dimensions shown on the LCD display.
The default setting is "inch".
Press the
"Unit" using the
or key.
key to display the Setup menu, select
1
2
3
or key, and then press the
Select a unit using the
or
key.
Press the
or
key.
Press the
key to return to the previous step.
Setting Language and Unit
24
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING A LABEL
Entering and Editing Text
Using the keyboard of your P-touch labeler is very similar to using a typewriter, word
processor, or personal computer.
Entering Text from the Keyboard
• To enter a lowercase letter or a number, simply press the desired key.
• To enter a blank space in the text, press the
• To enter an uppercase letter or one of the symbols on the number keys, hold down
the key and then press the desired key.
key.
• To enter uppercase letters continuously, press the
then press the desired keys.
key to enter Caps mode, and
• To exit Caps mode, press the
key again.
• To enter a lowercase letter while in Caps mode, hold down the
desired key.
key and then press the
Adding a New Line
• To end the current line of text and start a new line, press the
key. A return mark
appears at the end of the line and the cursor moves to the start of the new line.
• There is a maximum number of lines of text that can be entered for each tape width. A
maximum of 5 lines can be entered for 3/4" (18mm) tape, 3 lines for 1/2" (12mm) tape, 2 lines
for 3/8" (9mm) and 1/4" (6 mm) tape, and 1 line for 9/64" (3.5mm) tape.
• If you press the
key when max lines already exist, an error message is displayed.
• To change the character attribute of each line, refer to “Setting Character Attributes by Each
Adding a New Block
• To create a new block of text/lines to the right of your current text, press the
while holding down the key. A
1
key
2
3
4
5
6
7
mark will appear at the end of the block and
the cursor moves to the start of the new block.
A maximum of 5 blocks can be entered in one label.
Moving the Cursor
• To move the cursor left, right, up or down, press the
of the key moves the cursor one space or line.
• To move the cursor to the beginning or end of the current line, hold down the
key and then press the or keys.
• To move the cursor to the very beginning or end of the text, hold down the
and then press the or keys.
,
or
keys. Each press
key
8
9
Entering and Editing Text
25
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING A LABEL
Inserting Text
• To insert additional text into an existing line of text, move the cursor to the character
to the right of the position where you want to start inserting text and then enter the
additional text. The new text is inserted to the left of the cursor.
Inserting a Tab
• To insert a tab space between the existing line of text, move the cursor where you
wish to add a tab and press the
key. A mark appears to indicate the position
which the tab space will be entered.
• The tab space can also be entered by pressing the key to open the Setup menu and
selecting "Tab" by using or keys, and then pressing the or key.
Deleting Text
„
Deleting one character at a time
• To delete a character from an existing line of text, move the cursor to the character
to the right of the position you want to start deleting text and then press the key.
The character to the left of the cursor is deleted each time the key is pressed.
If you hold down the
key, the characters left to the cursor are deleted continuously.
„
Deleting all text at once
• Use the
key to delete all text at once.
Press the
The Clear options are displayed.
key.
1
2
Using the
or
keys, select “Text Only” to delete
all text while retaining the current format settings, or
select “Text & Format” to delete all text and format
settings.
Press the
key to return to the text entry screen,
without erasing (or clearing) text or format.
Press the
or
key.
3
All text is deleted. All format settings are also deleted
if Text & Format was selected.
Entering and Editing Text
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Symbols
In addition to the symbols available on the keyboard, there are various symbols
(including international and extended ASCII characters) available with the symbol
function.
There are two methods of entering symbols:
• Using the
key.
• Using the Symbol function.
Entering Symbols Using
Key
Symbols printed in upper-right corner of the keys on the keyboard can be entered using
the key.
• To enter one of these symbols, hold down the
key.
key and then press the desired
Entering Symbols Using the Symbol Function
Press the
key.
1
A list of symbol categories and symbols in that
category is displayed.
The last symbol entered is selected in the list displayed.
Select a symbol category (Punctuation, Business,
2
3
Mathematics, etc.) using the
or
key or by
pressing the
key repeatedly, and then select a
symbol using the
or
keys.
1
Press the
or
key.
2
3
4
5
6
7
The selected symbol is inserted into the line of text.
• Press the
key to return to the previous step.
categories.
8
9
Download from Www.Somanuals.com. All Manuals Search And DowEnnlotearindg. Symbols
27
EDITING A LABEL
zSymbol Listz
Category
Punctuation
Business
Mathematics
Bracket
Symbols
Arrow
Unit
International
Number
Pictograph
Electrical
Others
The use of the CE mark is strictly governed by one or more European Council directives. Ensure
that any labels you produce which use this mark conform with the relevant directives.
Entering Symbols
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Accented Characters
The P-touch labeler can display and print a set of accented characters such as other
language specific characters.
Enter the character you wish to change to composite
character.
1
Caps mode can be used with the Accent function.
Press the
key.
2
3
The character you entered will change to an accented
character.
Press the
accented character is selected, or select it by using
the or keys.
key repeatedly until the desired
The order of composite characters which appear on
display differ by the selected LCD language.
Press the
or
key.
4
The selected composite character is inserted into the
line of text.
• Press the
key to return to the previous step.
1
characters available.
2
3
4
5
6
7
8
9
Download from Www.Somanuals.com. All Manuals SearchEAnntedrinDg oAcwcnenloteaddC.haracters
29
Setting Character Attributes
Setting Character Attributes by Label
Using the
attributes.
key, you can select a font and apply size, width, style, line, and alignment
Press the
The current settings are displayed.
key.
1
Select an attribute using the
set a value for that attribute using the
or
keys, and then
or keys.
2
3
Press the
or
key to apply the settings.
New settings are NOT applied if you do not press the
or
key.
• Press the
• Press the
key to return to the previous step.
key to set the selected attribute to the default value.
• Refer to the Setting Options table for a list of all available settings.
• Small characters may be difficult to read when certain styles are applied (e.g. Shadow + Italic).
Setting Character Attributes by Each Line
When a label consists two or more lines of text, you can set different value of
character attributes (font, size, width, style, line and alignment) for each line.
1
2
3
4
5
6
7
Move the cursor to the line you wish to change the
character attribute by using the
or
keys. Next,
press the key while holding down
key to display
the attributes. ( on the screen indicates that you are
now applying the attribute for that specific line only.)
When different value of attribute is set for each line, the value
will be displayed as **** when you press the
key. When
you change the setting on this screen by using the or keys,
the same change will be applied to all lines of the label.
8
9
Download from Www.Somanuals.com. All Manuals Search ASnedttiDngoCwhnarlaocatedr.Attributes
31
EDITING A LABEL
Attribute
zFont & Size Optionsz
Value
Result
HEL
(Helsinki)
BRU
(Brussels)
Font
FLO
(Florida)
CAL
(Calgary)
When Auto is selected, the text is
Auto
42pt
36pt
24pt
18pt
12pt
9pt
automatically adjusted to print in the largest
size available for each tape width.
Size
6pt
Setting Character Attributes
32
Download from Www.Somanuals.com. All Manuals Search And Download.
zWidth & Style Optionsz
Attribute
Value
Result
x2
x1
Width
x2/3
x1/2
Off
BLD
(Bold)
OUT
(Outline)
SHD
(Shadow)
SLD
(Solid)
1
ITL
(Italic)
Style
2
3
4
5
6
7
I+BLD
(Italic Bold)
I+OUT
(Italic Outline)
I+SHD
(Italic Shadow)
I+SLD
(Italic Solid)
8
9
VRT
(Vertical)
Download from Www.Somanuals.com. All Manuals Search ASnedttiDngoCwhnarlaocatedr.Attributes
33
EDITING A LABEL
Attribute
Value
Off
Result
UND
(Underline)
Line
STR
(Strikeout)
Left
Center
Right
Align
(Alignment)
Just
(Justify)
Setting Auto Fit Style
When "Size" is set to "Auto" and "Length" is set to a specific length, you can select
the way of reducing the text size to fit within the label length.
When "Text Size" is selected, the total text size is modified to fit within the label.
When "Text Width" is selected, the text width will be reduced to the size of x1/2
setting. (If further size reduction is required to fit the text into the selected label
length, the total text size will be modified after reducing the text width to x1/2 setting.)
Press the
"Auto Fit Style" using the
press the or key.
The Auto Fit Style screen is displayed.
key to display the Setup menu, Select
1
2
3
or keys, and then
Select the style using the or keys.
Press the
or
key to apply the setting.
• Press the
• Press the
key to return to the previous step.
key to set the style to the default setting ("Text Size").
Setting Character Attributes
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Label Attributes
Using the
key, you can create a label with a frame around the text and specify the
label length and tab length. (Cut Options which may be needed when printing a label
can also be set by using the
54.)
Press the
The current settings are displayed.
key.
1
2
Select an attribute using the
set a value for that attribute using the
or
keys, and then
or keys.
• When setting the tab length, hold down the or
keys to change the value faster.
Press the
or
key to apply the settings.
3
New settings are NOT applied if you do not press the
or
key.
• Press the
• Press the
key to return to the previous step.
key to set the selected attribute to the default value.
1
• Refer to the Setting Options table for a list of all available settings.
2
3
4
5
6
7
8
9
Download from Www.Somanuals.com. All Manuals Search And SDeottwingnlLoaabedl.Attributes
35
Attribute
Value
Result
15
Frame
16
The length of the label can be set within the range 1.2" (30mm) -
12.0" (300mm). When Auto is selected, the length of the label is
automatically adjusted based on the amount of text entered.
Length
The length of the tab can be set within the range 0.0" (0mm) -
Tab Length
4.0"(100mm). The default setting is 2.0" (50mm)
.
Using Auto-Format Layouts
Using the Auto-Format function you can quickly and easily create labels for a variety of
purposes, such as file tabs, equipment labels, name badges, etc. Simply select a layout
from the templates or block layouts, enter the text and apply formatting as desired.
Symbols and accented characters can also be used in auto-format layouts.
Using Templates - Example creating an Asset Tag
Press the
key to display the Auto-Format screen,
or keys.
1
2
3
4
and then select "Templates" using the
1
2
3
4
5
6
7
Press the
The last template used is displayed.
or
key.
Select a template using the
or
keys.
Press the
The Style screen is displayed.
or
key.
8
9
Download from Www.Somanuals.com. All Manuals Search AUnsdinDg oAuwton-lFooarmda.t Layouts
37
EDITING A LABEL
Select an attribute using the
set a value for that attribute using the
or
keys, and then
or keys.
5
6
7
Press the
or
key.
The Bar Code Setup screen is displayed.
Select an attribute using the
set a value for that attribute using the
or
keys, and then
or keys.
The "C-Digit" (Check Digit) attribute is only available
for the CODE39, I-2/5 and CODABAR protocols.
Press the
or
key.
8
The template text entry screen is displayed.
Caps mode can be used when entering text.
Enter the text and then press the
Repeat this for each text field.
or
key.
9
After all text fields are entered, the print menu is
displayed when the
or
key is pressed.
Select "Print" using the
label.
or
keys and then press the
or
key to print the
10
• Select "Edit" to change the text data or style settings.
• Select "Save" to store the label in a file memory.
• Select "Quit" to exit the Auto-Format function.
Using Auto-Format Layouts
38
Download from Www.Somanuals.com. All Manuals Search And Download.
• Press the
key to return to the previous step.
• On the Style and Bar Code Setup screens, press the
attribute to the default value.
key to change the selected
• The "Clear All Text?" message is displayed when the key is pressed. Press the
key to delete all text, or press the key to not delete the file.
• To print multiple copies, sequentially numbered copies, or a mirror image of the label, with
or
the print menu displayed hold down the
Options menu.
key and press the
key to display the Print
• If the width of the current tape cassette does not match the set width for the selected layout,
an error message is displayed when you try to print the label. Press the key or any other
key to clear the error message, and insert a tape cassette of the correct width.
• If the number of characters entered exceeds the limit, an error message is displayed when the
or
key is pressed. Press the
key or any other key to clear the error message, and
edit the text using fewer characters.
• Except as "No cut" is set, when using the Auto-Format function the label is cut with a margin
on the left and right ends regardless of the current Tape Cutting Option setting (refer to
1
2
3
4
5
6
7
8
9
Download from Www.Somanuals.com. All Manuals Search AUnsdinDg oAuwton-lFooarmda.t Layouts
39
EDITING A LABEL
Attribute
zTemplatesz
Value
Details
Binder Spine
(3/4" x 8.6" [18mm x 219mm])
File Folder Tab
(1/2" x 3.2" [12 mm x 82 mm])
(1/2" x 1.6" [12 mm x 42 mm])
Divider Tab
(Hanging Folder)
Asset Tag
Bin Box
(3/4" x 2.7" [18 mm x 70 mm])
(3/4" x 3.0" [18 mm x 76 mm])
Template Name
Equipment Label
Faceplate (VRT)
Cable Wrap
(3/4" x 2.2" [18 mm x 58 mm])
(1/2" x 2.7" [12 mm x 70 mm])
(3/4" x 1.5" [18 mm x 39 mm])
Name Badge 1
Name Badge 2
(3/4" x 2.8" [18 mm x 72 mm])
(1/2" x 2.8" [12 mm x 72 mm])
Using Auto-Format Layouts
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Attribute
Value
Details
CD Case Spine 1
(1/4" x 4.4" [6 mm x 113 mm])
(9/64" x 4.4" [3.5 mm x 113 mm])
(3/4" x 5.5" [18 mm x 140 mm])
(3/8" x 1.6" [9 mm x 42 mm])
CD Case Spine 2
VHS Spine
Template Name
MiniDV Spine
Using Block Layouts
Press the
key to display the Auto-Format screen,
1
2
3
and then select “Block Layouts” using the
keys.
or
Press the
or
key to display the Tape Width
screen, and then select a tape width using the
or
keys.
1
Press the
or
key.
2
3
4
5
6
7
When the tape width has not changed, the last block
layout selected is displayed. When the tape width has
changed, the default layout for the new tape width is
displayed.
Select a block layout using the
or
keys.
4
5
Press the
or
key.
The Style screen is displayed.
8
9
Download from Www.Somanuals.com. All Manuals Search AUnsdinDg oAuwton-lFooarmda.t Layouts
41
EDITING A LABEL
Select an attribute using the
set a value for that attribute using the
or
keys, and then
or keys.
6
7
Press the
key to set the selected attribute to
the default value.
Press the
or
key.
The block layout text entry screen is displayed.
Caps mode can be used when entering text.
Enter text and then press the
Repeat for each text field.
After all text fields are completed, press the
key to display the print menu.
or
key.
8
9
or
Select "Print" using the
label.
or
keys and then press the
or
to print the
• Select "Edit" to change the text data or style settings.
• Select "Save" to store the label in a file memory.
• Select "Quit" to exit the Auto-Format function.
• Select "Change Layout" to use a different layout.
• Press the
• The “Clear All Text?” message is displayed when the key is pressed. Press the
key to delete all text, or press the key to not delete the text.
• To print multiple copies, sequentially numbered copies, or a mirror image of the label, with
key to return to the previous step.
or
the print menu displayed hold down the
Options menu.
key and press the
key to display the Print
• If the width of the current tape cassette does not match the set width for the selected layout,
an error message is displayed when you try to print the label. Press the key or any other
key to clear the error message, and insert a tape cassette of the correct width.
• If the number of characters entered exceeds the limit, an error message is displayed when tthe
or
key is pressed. Press the
key or any other key to clear the error message, and
edit the text using fewer characters.
• When using the Auto-Format function the label is cut with a margin on the left and right ends
Using Auto-Format Layouts
42
Download from Www.Somanuals.com. All Manuals Search And Download.
zBlock Layoutsz
Attribute
Value
Details
2LineA
2LineB
3Line
1+2LineA
1+2LineB
1+3Line
1+4Line
1+5Line
2LineA
2LineB
Block layout
(3/4" [18 mm]
tape)
1
2
3
4
5
6
7
Block layout
(1/2" [12 mm]
tape)
3Line
1+2Line
8
9
Download from Www.Somanuals.com. All Manuals Search AUnsdinDg oAuwton-lFooarmda.t Layouts
43
EDITING A LABEL
Attribute
Value
Details
2LineA
Block layout
(3/8" [9 mm]
tape)
2LineB
1+2Line
1+2Line
Block layout
(1/4" [6 mm]
tape)
Using Auto-Format Layouts
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a Bar Code Label
Using the Bar Code function you can create labels with one dimensional bar codes for
use with cash registers, stock control systems or other bar code reader systems, or
even asset control tags used in an asset management system.
• The P-touch labeler is not designed exclusively for creating bar code labels. Always check that
bar code labels can be read by the bar code reader.
• For best results, print bar code labels in black ink on white tape. Some bar code readers may
not be able to read bar code labels created using colored tape or ink.
• Use the “Large” setting for “Width” whenever possible. Some bar code readers may not be
able to read bar code labels created using the “Small” setting.
• Continuously printing a large number of labels with bar codes can overheat the print head,
which may effect printing quality.
Setting Bar Code Parameters
Press the
“Bar Code Setup” using the
press the or key
The Bar Code Setup screen is displayed.
key to display the Setup menu, select
1
or keys, and then
.
Pressing key while holding down
key will
also allow you to go to "Bar Code Setup".
Select an attribute using the
set a value for that attribute using the
or
keys, and then
or keys.
2
The "C-Digit" (Check Digit) attribute is only available
for the CODE39, I-2/5 and CODABAR protocols.
1
Characters may not appear below the bar code even
when "On" is selected for "Under #", depending on the
tape width being used, the number of lines entered, or
the current character style settings.
2
3
4
5
6
7
Press the
or
key to apply the settings.
3
New settings are NOT applied if you do not press the
or
key.
• Press the
• Press the
key to return to the previous step.
key to set the selected attribute to the default value.
8
9
Creating a Bar Code Label
45
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING A LABEL
zBar Code Settingsz
Attribute
Value
CODE39, CODE128, EAN8, EAN13, EAN128,
Protocol
UPC-A, UPC-E, I-2/5 (ITF), CODABAR
Large
Small
On
Width
Under#
(characters printed
below bar code)
Off
Off
C.Digit
(check digit)
On
(only available for the CODE39, I-2/5
and CODABAR protocols)
Entering Bar Code Data
Press the
key.
1
The Bar Code Input screen is displayed.
Up to five bar codes can be entered on a label.
Type in the bar code data.
2
Special characters can be entered in the bar code
when using the CODE39, CODABAR, CODE128 or
EAN128 protocols. When not using special characters,
go to step 5.
Press the
key.
3
4
A list of characters available for the current protocol is
displayed.
Select a character using the
or
keys, then press
the
or
key to insert the character in the bar code
data.
Creating a Bar Code Label
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the
label.
or
key to insert the bar code in the
5
Two bar code marks are displayed on the text entry
screen.
• Press the
key to return to the previous step.
zSpecial Character Listz
CODE39
Code
CODABAR
Special Character
Code
Special Character
0
1
2
3
4
5
6
0
1
2
3
4
5
(SPACE)
CODE128, EAN128
Code Special Character Code Special Character Code Special Character
0
1
(SPACE)
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
DC3
DC4
NAK
SYN
ETB
CAN
EM
2
1
3
4
NUL
2
3
4
5
6
7
5
6
SOH
STX
ETX
EOT
ENQ
ACK
BEL
BS
7
SUB
ESC
8
9
10
11
12
13
14
15
16
FS
GS
RS
US
HT
8
9
LF
VT
Creating a Bar Code Label
47
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING A LABEL
Code Special Character Code Special Character Code Special Character
17
18
19
20
21
22
23
41
42
43
44
45
46
47
FF
CR
65
66
67
68
69
DEL
FNC3
FNC2
FNC4
FNC1
SO
SI
DLE
DC1
DC2
Editing and Deleting a Bar Code
• To edit the bar code data position the cursor beneath either of the bar code marks
on the data entry screen and then open the Bar Code Input screen. Refer to “Entering
• To edit the “Width” and “Under#” settings on a bar code already placed on the screen,
position the cursor beneath either of the bar code marks on the data entry screen and
then open the Bar Code Setup screen. Refer to “Setting Bar Code Parameters” on
• To delete a bar code from a label, position the cursor to right of the bar code marks
on the data entry screen and press the
key.
Creating a Bar Code Label
48
Download from Www.Somanuals.com. All Manuals Search And Download.
LABEL PRINTING
Label Preview
Using the Preview function you can check the layout of the label before printing it onto
the label.
Press the
key.
1
An image of the label is displayed on the screen.
The length of the label is shown in the lower-right
corner of the screen.
Press the or keys to scroll the preview to the left
or right.
Press the
or
keys to change the magnification of the preview.
• Press the
by pressing
key to return to the text entry screen. (You can also return to the text entry screen
or key.)
,
• To scroll the preview to the left or right end, hold down the
keys.
key and press the or
• To print the label directly from the preview screen, press the
key or open the print
options screen and select a print option. Refer to "Printing a Label" below for details.
• The print preview is a generated image of the label, and may differ from the actual label when
After entering the text and formatting the label, you are ready to print your label. In
addition to printing a single copy of a label, your P-touch labeler has several printing
features that allow you to print multiple copies of a label, sequentially numbered labels
and mirror-printed labels.
1
2
3
4
5
6
7
8
9
Label Preview
49
LABEL PRINTING
Printing a Single Copy
Make sure that the appropriate tape cassette is inserted and ready for printing.
1
Press the
key.
2
The message shown on the right is displayed while
the label is being printed.
To stop printing, press the
key to turn off the P-touch labeler.
There are several other messages that may appear when you press the
Messages” on page 65 for further information about error messages.
key. Refer to “Error
Printing Multiple Copies
Using this function you can print up to 9 copies of the same label.
Make sure that the appropriate tape cassette is inserted and ready for printing.
1
2
Hold down the
display the print options screen, and then select
“Copies” using the or keys.
key and press the
key to
Press the
and then select the number of copies to be printed
using the or keys, or type the number using the
number keys.
or
key to display the Copies screen,
3
• Hold down the
or
keys to change the number
of copies faster.
• Pressing the
key when setting the number
of copies resets the value to 1, the default.
Press the or key.
The message shown on the right is displayed while
the labels are being printed.
4
• Press the
key to return to the previous step.
• Unless set otherwise, the tape is automatically cut after each copy is printed. Refer to “Tape
Cutting Options” on page 53 to change this setting.
• The figures shown on the screen during printing indicate the “count / number of copies set”.
Printing aDLaobwelnload from Www.Somanuals.com. All Manuals Search And Download.
50
Auto-numbering Labels
Using the numbering function you can create a set of sequentially numbered labels
from a single label format.
Make sure that the appropriate tape cassette is inserted and ready for printing.
1
Hold down the
display the print options screen, and then select
"Numbering" using the or keys.
key and press the
key to
2
3
Press the
or
key.
The numbering start point screen is displayed.
To apply auto-numbering to a bar code, select the bar code
here. After selecting the bar code you will be prompted to
enter the number of labels to be printed (step 6).
Move the cursor to the first character to be
incremented in the numbering sequence and press
4
5
6
the
or
key.
The numbering end point screen is displayed.
Move the cursor to the last character to be
incremented in the numbering sequence and press
the
or
key.
The number of labels to be printed is displayed.
Select the number of labels to be printed using the
1
or
keys, or type the number using the number
keys.
2
3
4
5
6
7
• Hold down the
of labels faster.
• Pressing the
or
keys to change the number
key when selecting the
number of copies resets the value to 1, the default.
Press the or key.
The labels are printed.
As each label is printed the number of copies printed
is shown.
7
8
9
Printing a Label
51
Download from Www.Somanuals.com. All Manuals Search And Download.
LABEL PRINTING
• Press the
key to return to the previous step.
• Unless set otherwise, the tape is automatically cut after each copy is printed. Refer to “Tape
Cutting Options” on page 53 to change this setting.
• The figures shown on the screen during printing indicate the “count / number of copies”.
• Auto-numbering can also be applied to bar codes. When a bar code contains an auto-
numbering sequence, no other fields in the label can contain an auto-numbering sequence.
• The auto-number portion of the label is incremented after each label is printed.
• Only one auto-numbering sequence can be used in a label.
• Any symbols or other non-alphanumeric characters in the auto-numbering sequence are
ignored.
• An auto-numbering sequence can only contain a maximum of five characters.
• Letters and numbers increase as shown below:
0
A
a
Î
Î
Î
Î
1
B
b
...9
...Z
...z
Î
Î
Î
Î
0
A
a
Î
Î
Î
Î
...
...
...
...
A0
A1 ...A9
B0
Spaces (shown as underlines “_” in the example below) can be used to adjust the spacing
between characters or to control the number of digits that are printed.
_9
_Z
1_9
Î
Î
Î
10
...99
Î
Î
Î
00
AA
0_0
Î
Î
Î
...
...
...
AA ...ZZ
2_0 ...9_9
Mirror Printing
Using the mirror printing function you can create labels with the text printed in reverse
so that they can be read from the opposite side when attached to glass or other
transparent material.
Make sure that the appropriate tape cassette is inserted and ready for printing.
1
Hold down the
display the print options screen, and then select
“Mirror” using the
Press the or
key and press the
key to
2
3
4
or
key.
key.
The message “Mirror Print?” is displayed
Press the
or
key.
The message shown on the right is displayed while
the label is being printed.
Printing aDLaobwelnload from Www.Somanuals.com. All Manuals Search And Download.
52
• Press the
key to return to the previous step.
• Text should be printed on clear tape when using the mirror printing function.
• The copy and auto-numbering functions cannot be used together with the mirror printing
function.
Tape Cutting Options
The tape cutting options allow you to specify how the tape is fed and cut when printing
labels. In particular, the “Chain” and “No Cut” options greatly reduce the amount of
wasted tape by using smaller margins and eliminating blank sections cut between
labels.
Press the
key to display the Label menu.
1
2
3
Select "Cut Option" using the
set the value by using the
or
keys, and then
keys.
or
Press the
or
key to apply the settings.
New settings are NOT applied if you do not press the
or
key.
1
• Press the
key to return to the previous step.
2
3
4
5
6
7
8
9
Download from Www.Somanuals.com. All Manuals Search And DToawpenlCouattdin.g Options
53
LABEL PRINTING
Setting
zTape Cuttingz
Description
Example
Automatically cuts the tape after each label is
printed. The labels have a 0.94" (24 mm)
margin on the left and right ends.
ABC
ABC
Large
Margin
0.94"
(24 mm)
0.94"
(24 mm)
• When printing labels one at a time:
Automatically cuts a piece of blank tape
before printing the label, and then cuts the
tape after the label is printed.
• When printing several labels continuously:
Automatically cuts a piece of blank tape
before printing the first label, and then cuts
the tape after each label is printed.
• The labels have a 0.16" (4 mm) margin on
the left and right ends.
0.92" (23 mm)
ABC
ABC
0.16"
0.16"
(4 mm) (4 mm)
Small
Margin
• When printing labels one at a time:
Automatically cuts a piece of blank tape
before printing the label, and then does not
cut the tape after the label is printed.
• When printing several labels continuously:
Automatically cuts a piece of blank tape
before printing the first label, and then cuts
the tape after each label is printed.
• The labels have a 0.16" (4 mm) margin on
the left and right ends.
0.92" (23 mm)
ABC ABC
0.16"
0.16"
(4 mm) (4 mm)
Chain
• The tape is not fed and cut after the last
label is printed.
• Use this setting to print a strip of labels with
no cuts in between.
ABC ABC
No Cut
• Pressing the
key will feed and cut the last label
printed.
while holding down
1.06"
0.31"
(27 mm)
(8 mm)
• When using Fabric Iron-On Tapes or Extra Strength Adhesive Tapes, set “No Cut” and refer
to “Feeding Tape” on page 22 to apply the appropriate setting.
• The tape is not cut after the last label is printed when “Chain” or “No Cut” is set. Hold down
the
key and press the
key, and select “Feed & Out” (refer to “Feeding Tape” on
page 22 ) to feed and cut tape automatically, or cut the tape manually if you are using Fabric
Iron-on Tapes or Extra Strength Adhesive Tapes.
• When using the Auto-Format function, the label is cut with a margin on the left and right ends
regardless of the current Tape Cutting Option Setting except as “No Cut” is set.
Tape Cutting Options
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Label Length
You can adjust the length of the printed label in levels of -5 to +5.
Press the
"Adjust Length" using the or key, and then press
the or key.
key to display the setup menu, select
1
2
3
Select "Adjust Length" by using the
then set the value by using the or
or
key.
key, and
Press the
or
key to apply the setting.
• Press the
• Press the
key to return to the previous step.
key to set the value to default setting.
• Approximately 1% of the total label length will be adjusted by 1 level.
Attaching Labels
If necessary, trim the printed label to the desired shape and length using scissors,
etc.
1
2
1
Peel the backing from the label.
2
3
4
5
6
7
The backing of some types of tapes may be pre-cut to
make it easier to peel the backing.
Position the label and then press firmly from top to bottom with your finger to
attach the label.
3
• Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel
off easily from these surfaces.
• Be sure to read the instructions provided with Fabric Iron-On Tapes, Extra Strength Adhesive
Tapes or other special tapes and observe all precautions noted in the instructions.
8
9
Adjusting the Label Length
55
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE FILE MEMORY
You can store up to 9 of your most frequently used labels in the file memory. Each label
is stored as a file, allowing you to quickly and easily recall your label when needed
again.
• When the file memory is full, each time you save a file you will need to overwrite one of your
stored files.
• You will lose your stored files if the AC adapter is disconnected and the batteries are removed
for more than two minutes.
Storing a Label into Memory
After entering the text and formatting the label, press
1
the
key to display the File screen.
Select "Save" using the
or
keys.
2
3
4
Press the
or
key.
A file number is displayed.
A label text is also displayed if a label is already stored
in that file number.
Select a file number using the
press the or key to save the label under the
or
key, and then
selected file number.
The file is saved and the screen returns to the text
entry screen.
When there is already a stored file in the selected
number, the data will be overwritten by the file you try
to save.
• Press the
key to return to the previous step.
• Up to 200 characters can be saved in one file, depending on the number of lines. However,
there is a maximum of 1800 characters for the total number of characters saved in up to 9 files.
Text and layout formatting data is also saved in the file.
• To store a label created by using the Auto-Format Layouts, refer to “Using Auto-Format
Storing aDLaobwelninltooaMdemfroormy Www.Somanuals.com. All Manuals Search And Download.
56
Opening a Stored Label File
Press the
key to display the File screen.
1
2
3
4
Select "Open" using the
or
keys.
Press the
or
key.
The file number of a stored label is displayed.
The label text is also displayed to identify the label.
Select a file number using the
press the or key to open the selected file.
or
key, and then
The file is opened and displayed on the text entry
screen.
Press the
key to return to the previous step.
1
2
3
4
5
6
7
8
9
Opening a Stored Label File
57
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE FILE MEMORY
Printing a Stored Label File
Press the
key to display the File screen.
1
2
3
4
Select "Print" using the
or
keys.
Press the
or
key.
The file number of a stored label is displayed.
The label text is also displayed to identify the label.
Select a file number using the
press the or key to print the selected
label. The label is printed from the machine.
or
key, and then
,
• Press the
key to return to the previous step.
• The message "No Text!" is displayed when you try to print a file with no text.
Printing aDSotowrendlLoaabdel fFriolem Www.Somanuals.com. All Manuals Search And Download.
58
Deleting a Stored Label File
Press the
key to display the File screen.
1
2
3
4
5
Select "Delete" using the
or
keys.
Press the
or
key.
The file number of a stored label is displayed.
The label text is also displayed to identify the label.
Select a file number using the
press the or key.
The message “Delete?” is displayed.
or
key, and then
Press the
or
key to delete the file.
The file is deleted and the screen returns to the text entry screen.
Press the
key to cancel deleting the file and return to the previous screen.
1
2
3
4
5
6
7
8
9
Download from Www.Somanuals.com. All Manuals Search ADnedleDtinogwanSltooraedd.Label File
59
MAINTAINING YOUR P-touch Labeler
Resetting the P-touch Labeler
You can reset the P-touch labeler internal memory to clear all saved label files and
revert the machine back to factory settings.
Turn off the machine. Press and hold the
and , press and release the . Now, release the
labeler's internal memory is now reset.
and
. Continue to hold the
and . The P-touch
1
Release the
key before releasing the other keys.
All text, format settings, option settings and stored label files are cleared when you reset the
P-touch labeler. Language and unit settings will also be cleared.
Maintenance
Your P-touch labeler should be cleaned on a regular basis to maintain its performance.
Always remove the batteries and disconnect the AC adapter prior to cleaning the P-touch labeler.
Cleaning the exterior of the P-touch labeler
Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a slightly dampened cloth with water on difficult to remove marks.
Do not use paint thinner, benzene, alcohol or any other organic solvent. These may deform the
case or damage the appearance of your P-touch labeler.
Cleaning the Print Head
Streaks or poor quality characters on printed
labels generally indicates that the print head is
dirty. Clean the print head using a dry cotton
swab or optional print head cleaning cassette
(TZ-CL4).
Print head
Refer to the instructions provided with the print head
cleaning cassette for directions on how to use it.
WARNING
Do not touch the print head directly with your
bare hands. The print head maybe hot.
ResettingDthoewPn-tolouachdLfarboemlerWww.Somanuals.com. All Manuals Search And Download.
60
Cleaning the Tape Cutter
About once every year, wipe the cutter blades using a
cotton swab moistened with isopropyl alcohol (rubbing
alcohol).
Tape adhesive can build up on the cutter blade after
repeated use, taking the edge off the blade which may
result in the tape jamming in the cutter.
CAUTION
Do not touch the cutter blade directly with your
bare hands.
1
2
3
4
5
6
7
8
9
Maintenance
61
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
What to do when...
Problem
Possible Cause
Recommendation
The screen locks-up
freezes, or the P-touch reset the internal memory to the initial settings. If resetting
labeler does not
respond normally.
the P-touch labeler does not solve the problem, disconnect
the AC adapter and remove the batteries for more than 10
minutes.
The display remains
Is the AC adapter connected Check that the AC adapter
blank after turning on correctly?
the power.
designed exclusively for
your P-touch labeler is
connected correctly.
Are you using the correct AC Check that the label on the
adapter?
AC adapter indicates it is a
Brother AD-24 adapter.
Using a wrong adapter can
damage the machine.
Are the batteries installed
correctly?
Remove and re-install the
batteries.
The label is not
printed after pressing
Has text been entered?
A label will not be printed if
there is no text entered.
the
key.
Is the tape cassette installed Check that the tape cassette
correctly, and is there
enough tape remaining?
is installed correctly, and
that there is enough tape
remaining.
Is the end of the tape bent? If bent, cut the bent section
of tape with scissors and
thread the tape through the
tape exit slot correctly.
Is the tape jammed?
If jammed, remove the tape
cassette, carefully pull out
the jammed tape, and then
cut the tape with scissors.
Check that the end of the
tape passes through the
tape guide, and reinstall the
tape cassette.
Does the tape compartment If so, close the tape
cover open?
compartment cover
correctly.
What to dDo owwhennl..o. ad from Www.Somanuals.com. All Manuals Search And Download.
62
Problem
Possible Cause
Recommendation
The LCD messages
are displayed in a
foreign language.
Is the language set
properly?
Refer to “Setting Language
select the desired language
for the LCD messages.
The label is not
Is the tape cassette installed When installing a cassette,
printed correctly.
correctly?
press firmly until it clicks into
place.
Is the print head clean?
If not, clean the print head
using a cotton swab or
optional print head cleaning
cassette (TZ-CL4).
Is Cut Option set to Chain or When these options are set,
No Cut?
the tape is not fed after
printing the label. Check the
Cut Option setting, or hold
down the
the
key and press
key to feed and cut
the tape.
The ink ribbon is
separated from the
ink roller.
Is the ink ribbon in the tape If the ink ribbon is broken
cassette loose, or did you replace the tape cassette. If
pull on the label coming out not, leave the tape uncut and
of the tape exit slot?
remove the tape cassette,
then wind the loose ink
ribbon onto the spool as
shown in the figure.
1
2
3
4
5
6
7
Spool
Ink ribbon
8
9
What to do when...
63
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Problem
Possible Cause
Recommendation
The P-touch labeler
stops while printing a remaining in the tape
label.
Is there enough tape
The striped tape indicates
you have reached the end of
the tape. Replace the tape
cassette when the striped
tape appears.
cassette?
Are the batteries weak and Replace all batteries or
the AC adapter not
connect the AC adapter
connected or is the AC
(Brother AD-24) directly to
adapter the Brother AD-24? the P-touch labeler.
The label is not cut
automatically.
Is Cut Option set to Chain or When these options are set,
No Cut?
the tape is not fed after
printing the label. Check the
Cut Option setting, or hold
down the
the
key and press
key to feed and
cut the tape.
Is Manual Cutting set to ON? When using Fabric Iron-On
Tapes or Extra Strength
Adhesive Tapes, please use
scissors to cut the tape after
printing.
Does the tape compartment If so, close the tape
cover open?
compartment cover
correctly.
Label files saved
previously are now
empty.
Have the batteries and AC
adapter been disconnected? memory is lost if the
batteries and AC adapter are
All files stored in the internal
disconnected for longer than
two minutes.
Is there enough power
remaining in the batteries?
All data stored in the internal
memory is lost if the
batteries become empty.
Have you used the Reset
function?
The reset function clears all
data stored in the internal
memory, including label
files.
What to dDo owwhennl..o. ad from Www.Somanuals.com. All Manuals Search And Download.
64
Error Messages
When an error message appears on the display, follow the directions provided below.
Press any key to clear the error message.
Message
Cause/Remedy
The installed batteries are getting weak.
The installed batteries are about to run out of power. Replace
with new batteries or connect the AC adapter before
continuing.
An incompatible AC adapter is connected. Use only the AC
adapter (Brother AD-24) designed exclusively for your
P-touch labeler.
The tape cutter is closed when you try to print or feed tape
with the cover closed and the tape cassette inserted. Turn the
P-touch labeler off and then on again before continuing.
When tape is tangled in the cutter, remove the tape.
There is no text, symbols or bar code data entered when you
try to print or preview a label. Enter data before continuing.
There is no tape cassette installed when you try to print or
preview a label, or feed tape. Install a tape cassette before
continuing.
1
2
3
4
5
6
7
The tape cassette is changed while printing, etc. Make sure
the correct tape cassette is inserted before printing.
There are already five lines of text when you press the
key. Limit the number of lines to five.
There are more than three lines of text when you press the
or
key while using 1/2" (12 mm) tape. Limit the
number of lines to three, or replace with tape cassette of
larger tape width.
8
9
Download from Www.Somanuals.com. All Manuals Search And DownElorraodr M. essages
65
TROUBLESHOOTING
Message
Cause/Remedy
There are more than two lines of text when you press the
or
key while using 3/8" or 1/4" (9 mm or 6 mm)
tape. Limit the number of lines to two, or replace with tape
cassette of larger tape width.
There is more than one line of text when you press the
or
key while using 9/64" (3.5mm) tape. Limit the
number of lines to one, or replace with tape cassette of larger
tape width.
There are already five blocks of text. Limit the number of
blocks to five.
The maximum number of characters have already been
entered. Edit the text and use fewer characters.
The length of the label to be printed using the text entered is
longer than 39.37" (1 m). Edit the text so that the length of the
label is less than 39.37" (1 m).
An 3/4" (18 mm) tape cassette is not installed when an Auto-
Format for 3/4" (18 mm) tape is selected. Install an 3/4" (18
mm) tape cassette.
A 1/2" (12 mm) tape cassette is not installed when an Auto-
Format for 1/2" (12 mm) tape is selected. Install a 1/2" (12
mm) tape cassette.
A 3/8" (9 mm) tape cassette is not installed when an Auto-
Format for 3/8" (9 mm) tape is selected. Install a 3/8" (9 mm)
tape cassette.
Error Messages
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Message
Cause/Remedy
A 1/4" (6 mm) tape cassette is not installed when an Auto-
Format for 1/4" (6 mm) tape is selected. Install a 1/4" (6 mm)
tape cassette.
A 9/64" (3.5mm) tape cassette is not installed when an Auto-
Format for 9/64" (3.5mm) tape is selected. Install an 9/64"
(3.5mm) tape cassette.
The maximum number of characters for the selected layout
have already been entered. Edit the text to use fewer
characters or use a different layout.
The value entered for setting the tape length, tab length,
multiple copies, or numbering function is invalid. Enter a valid
value for the setting.
The tape length set using the tape length setting is shorter than
the total length of the left and right margins applied for the
"Large Margin" cutting option. Select a different cutting option.
The length of the label to be printed using the text entered is
longer than the length setting. Edit the text to fit within the set
length or change the length setting.
1
2
3
4
5
6
7
The text size is too large. Select a different size option.
The number of digits entered in the bar code data does not
match the number of digits set in the bar code parameters.
Enter the correct number of digits.
The bar code data entered does not have the required start/
stop code (A, B, C, or D required at the beginning and end of
the bar code data for the CODABAR protocol). Enter the bar
code data correctly.
8
9
There are already 5 bar codes entered in the text data when
you try to enter a new bar code. You can only use up to five
bar codes in each label.
Download from Www.Somanuals.com. All Manuals Search And DownElorraodr M. essages
67
APPENDIX
Specifications
Main Unit
Item
Specification
Input Device (Keyboard) 65-key, QWERTY layout keyboard
Display
Display device
Dot matrix LCD
Character display
Back light display
16 characters x 1 guidance and 2 lines (128 dot x 48 dot)
No
Printing
Print method
Print head
Thermal printer
128 dot / 180 dpi
Print height
Print speed
Tape cassette
0.62" (15.8 mm) max. (when using 3/4" (18 mm) tape)
Approx. 0.39" (10 mm) / sec.
Standard TZ tape cassette (9/64", 3/8", 1/2", 3/4" [3.5, 6, 9,
12, 18 mm] widths)
Tape cutter
No. of lines
Built-in automatic cutter
3/4" (18 mm) tape: 1 - 5 lines; 1/2" (12 mm) tape: 1 - 3 lines;
3/8" (9 mm) tape: 1 - 2 lines; 1/4" (6 mm) tape: 1 - 2 lines;
9/64" (3.5 mm) tape: 1 line
Print direction
Horizontal, Vertical
Continuous printing 1 ~ 9 labels
Print preview
Cut and feed
Yes
Large Margin, Small Margin, Chain, No Cut
Characters
Internal character
set:
Total of 301 characters (62 alphanumeric, 92 symbols,
147 accented characters.)
Text buffer
Fonts
200 characters max.
Helsinki, Brussels, Florida, Calgary
Auto, 42pt, 36pt, 24pt, 18pt, 12pt, 9pt, 6pt
Character size
Character style
Off, Bold, Outline, Shadow, Solid, Italic, Italic Bold, Italic
Outline, Italic Shadow, Italic Solid, Vertical
Character width
Text alignment
2, 1, 2/3, 1/2
Left, Center, Right, Justify
Specifications
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Specification
Maximum 1800 characters
Memory
Memory size
File storage
Other Features
Frame
Maximum 9 files
Total of 16 frame patterns (including shaded pattern)
Auto-Format
Templates: 14
Block layouts: 3/4"(18 mm): 8, 1/2" (12 mm) : 4,
3/8" (9 mm): 3, 1/4" (6 mm): 1
Screen contrast
Power Supply
5 levels (+2, +1, 0, -1, -2)
Power supply
AC adapter (AD-24), Six AA-size alkaline batteries (LR6).
Auto Power-off
P-touch only: 5 minutes
Connected PC: 60 minutes
Size
Dimensions
6.98"(W) x 9.14" (D) x 2.68" (H)
[177.2 mm (W) x 232.1 mm (D) x 68.0 mm (H)]
Weight
Other
1.72lb (780g) (without tape cassette and batteries)
Operating
temperature /
humidity
50 ~ 95°F / 20 ~ 80% humidity (without condensation)
1
2
3
4
5
6
7
8
9
Specifications
69
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Operating Environment: Windows®
Item
Specification
®
®
OS
Microsoft Windows 2000 Professional/XP/
TM
Windows Vista
Windows® 2000 Pro, XP: 128MB or more required
Windows Vista : 512MB or more
Memory
TM
Hard disk
Monitor
Interface
Other
70MB or more required
SVGA High Color graphics support or higher
USB Port (USB specification 1.1 or later protocol)
CD-ROM drive for installation
Specifications
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Information (For USA Only)
Service Center Locations
If you need a local service center, please call 1-800-284-HELP (4357)
to locate the authorized service center closest to you.
Note: Be sure to call the Service Center before your visit.
Service centers do not provide operational assistance. See "Operational Assistance".
Operational Assistance
For technical and operational assistance you may call Brother Customer Service at:
Voice 1-877-4-PTouch or 1-877-478-6824
Fax
1-901-379-1210
Email custsrv@brother.com
Assistance on the Internet
For product information: http://www.brother.com
For downloading the latest drivers: http://solutions.brother.com
For purchasing accessories and certain Brother products: http://www.brothermall.com
Accessories and Supplies
To order Brother accessories or supplies by Visa, MasterCard, Discover or American Express,
you may call toll tree 1-888-879-3232, or complete the order form in your user's guide and
fax both sides of the form to 1-800-947-1445.
For purchasing accessories on the Internet: http://www.brothermall.com
To order by mail or pay by check, please complete the accessory order form and mail it along
with payment to:
Brother International Corporation
Attn: Consumer Accessory Division
P.O. Box 341332
Bartlett, TN 38133-1332
Fax-Back System
Brother Customer Service has installed an easy-to-use Fax-Back System so you can get
instant answers to common technical questions and product information for all Brother products.
This system is available 24 hours a day, 7 days a week. You can use the system to send the
information to any fax machine, not just the one you are calling from.
Please call 1-800-521-2846 and follow the voice prompts to receive faxed instructions on how
to use the system and an index of Fax-Back subjects.
Save Time - Register On-Line!
Don't stand in line at the post office or worry about lost mail. Visit us on-line at
www.registermybrother.com
Your product will immediately be registered in our database and you can be on your way!
Also, while you're there, look for contests and other exciting information!
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaración de conformidad de la Comisión Federal de Comunicaciones (FCC) (sólo para
EE.UU.)
Parte responsable:
Brother International Corporation
100 Somerset Corporate Boulevard
Bridgewater, NJ 08807-0911 USA
TEL: (908) 704-1700
declara que el producto
Nombre del producto: Sistema de etiquetado electrónico P-touch de Brother
Número de modelo: PT-2100/2110
Este dispositivo cumple con la Parte 15 de la normativa de la FCC. El funcionamiento está
sujeto a las dos condiciones siguientes: (1) este dispositivo no puede causar interferencias
nocivas y (2) este dispositivo debe aceptar cualquier interferencia que reciba, incluidas las
interferencias que puedan provocar un funcionamiento no deseado.
Este equipo ha sido sometido a diversas pruebas y se ha comprobado que cumple con los
límites establecidos para los dispositivos digitales de Clase B, de acuerdo con la Parte 15
de la normativa de la FCC. Dichos límites están diseñados para proporcionar una
protección razonable contra las interferencias nocivas en las instalaciones residenciales.
Este equipo genera, utiliza y puede irradiar energía de radiofrecuencias y, si no se instala
y utiliza siguiendo las instrucciones suministradas, podría provocar interferencias nocivas
en las comunicaciones de radio. No obstante, no existe garantía alguna de que no se
• IBM es una marca comercial de International Business Machines, Inc.
• Los logotipos Brother y P-touch son marcas registradas de Brother Industries, Ltd.
• Microsoft y Windows son marcas comerciales registradas de Microsoft Corporation,
EE UU.
• Los nombres de otros productos y del software mencionados en este documento
son marcas comerciales o marcas comerciales registradas de las empresas que los
desarrollaron.
®
Garantía limitada de un año y Servicio de sustitución de Brother
(sólo en Estados Unidos)
Cobertura:
• Esta garantía limitada (“garantía”) sólo se concede al comprador original final (en
adelante el “Comprador original”) del producto al que acompaña, consumibles y
accesorios (denominados colectivamente en esta garantía “la máquina”).
• Si ha adquirido este producto a alguien que no es un distribuidor autorizado de Brother
en los Estados Unidos, o si el producto ha sido utilizado (incluyendo, pero sin limitarse
a modelos de exposición o productos reacondicionados) antes de que el usuario lo
comprara, entonces dicho usuario no es el Comprador original y el producto adquirido
no estará cubierto por esta garantía.
Alcance de la cobertura:
• Este producto incluye una máquina y artículos consumibles y accesorios. Los artículos
consumibles y accesorios incluyen, pero no se limitan a casetes de etiquetas,
cortadores, estampas, adaptadores eléctricos, cajas y pilas.
• A excepción de lo dispuesto en este documento, Brother garantiza que la máquina y los
artículos consumibles y accesorios que la acompañan no presentarán ningún defecto en
sus materiales ni de mano de obra, si se utilizan en condiciones normales.
• Esta garantía se aplica exclusivamente a los productos adquiridos y utilizados en los
Estados Unidos. En el caso de aquellos productos que se hayan comprado dentro de los
Estados Unidos, pero se han utilizado fuera de sus fronteras, esta garantía sólo cubre el
servicio de garantía dentro de los Estados Unidos (es decir, no incluye los gastos de
transporte fuera de los Estados Unidos).
Duración del periodo de garantía:
• Máquinas: un año a partir de la fecha de compra original.
• Consumibles y accesorios incluidos: 90 días a partir de la fecha de compra original o la
duración prevista del consumible, lo que suceda antes.
Aspectos NO CUBIERTOS:
Esta garantía no cubre:
(1) Daños físicos a la máquina;
(2) Daños provocados por una instalación incorrecta, uso anormal o incorrecto, abuso,
negligencia o accidente (incluyendo pero sin limitarse al transporte de esta máquina sin la
preparación o embalaje adecuados);
(3) Daños provocados por otro dispositivo o software utilizado con esta máquina (incluyendo
pero sin limitarse a daños como consecuencia del uso de piezas, artículos consumibles y
accesorios que no sean de la marca Brother®);
(4) Los artículos consumibles y accesorios que caducaron de acuerdo con la duración
establecida para los mismos, y,
(5) Problemas resultantes de otras causas que no son defectos en los materiales o mano de obra.
Esta garantía limitada quedará ANULADA si esta máquina se altera o modifica de alguna
forma (incluyendo pero sin limitarse al intento de una reparación en garantía sin la
autorización de Brother o la alteración/eliminación del número de serie).
Procedimiento que debe seguir si su Producto cumple con los requisitos del
servicio en garantía:
Informe del problema a nuestra Línea directa de atención al cliente de P-touch llamando
al número 1-877-478-6824 o a un Centro de servicio autorizado de Brother dentro del
periodo de garantía aplicable. Presente a Brother, o al centro de servicio autorizado de
Brother, una copia de la factura de venta fechada donde se pueda comprobar que la
máquina se adquirió en los Estados Unidos. Si desea conocer el nombre de un Centro de
servicio autorizado Brother en su localidad, llame al 1-800-521-2846.
Brother le pedirá que realice lo siguiente:
Tras ponerse en contacto con Brother o con un Centro de servicio autorizado de Brother,
es posible que tenga que entregar (personalmente si lo prefiere) o enviar el producto
debidamente empaquetado, con el transporte ya abonado, al Centro de servicio
autorizado junto con una fotocopia de la factura de compra.
El usuario será el responsable de sufragar los gastos de transporte, empaquetado
del producto y seguro (si lo desea). El usuario también será responsable de la
pérdida o los daños que pueda sufrir el producto durante su transporte.
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother, por su parte, actuará de la siguiente forma:
Si el problema del que se informa con relación a la máquina o artículos consumibles y
accesorios está cubierto por esta garantía y si usted ya informó del mismo problema a
Brother o a un Centro de servicio autorizado dentro del plazo de garantía aplicable,
Brother o su Centro de servicio autorizado reparará o sustituirá la máquina o los artículos
consumibles y accesorios sin cobrarle las piezas ni la mano de obra. Brother, bajo su
propio criterio, decidirá si va a reparar o a sustituir la máquina o los artículos consumibles
y accesorios.
Brother se reserva el derecho a proporcionar una máquina reacondicionada o los
artículos consumibles y los accesorios que la acompañan, y utilizar piezas
reacondicionadas siempre y cuando los productos reacondicionados cumplan con las
especificaciones del fabricante respecto a productos o piezas nuevas.
La máquina reparada o sustituida, o los artículos consumibles y accesorios que la
acompañan se devolverán al usuario por transporte pagado o se pondrán a su
disposición para que los recoja personalmente en un Centro de servicio autorizado
situado en un lugar conveniente.
Si la máquina o los artículos consumibles y accesorios no están cubiertos por esta
garantía (ninguna de sus dos fases), se cobrarán al usuario los gastos de transporte en
los que se incurra para devolverle el equipo y los artículos consumibles y accesorios, así
como por cualquier servicio o pieza/producto de repuesto, a las tarifas publicadas
actuales de Brother.
Lo anteriormente descrito constituye los únicos recursos que tiene el usuario bajo
esta garantía.
Limitaciones:
Brother no se responsabiliza de los daños o pérdida de un equipo, soporte, programas o
datos relacionados con el uso de esta máquina. Excepto en el caso de las reparaciones o
sustituciones descritas anteriormente, Brother no será responsable de ningún daño
directo, indirecto, accidental o consecuente, ni de desagravio específico. Algunos
estados no autorizan esta exclusión o limitación de los daños consecuentes o
accidentales, por tanto, es posible que la limitación anterior no se aplique en su caso.
ESTA GARANTÍA INVALIDA CUALQUIER OTRA GARANTÍA, ESCRITA U ORAL, YA
SEA EXPRESADA MEDIANTE UNA AFIRMACIÓN, PROMESA, DESCRIPCIÓN,
DIBUJO, MODELO O PRUEBA. TODAS Y CADA UNA DE LAS GARANTÍAS
DISTINTAS DE ESTA, SEAN EXPLÍCITAS O IMPLÍCITAS, INCLUIDAS LAS
GARANTÍAS DE COMERCIABILIDAD Y ADECUACIÓN A UN PROPÓSITO
DETERMINADO, QUEDAN POR EL PRESENTE RECHAZADAS.
• Esta garantía limitada es la única garantía que Brother ofrece para esta máquina. Se
trata de la expresión última y la declaración única y exclusiva de las obligaciones de
Brother para con el usuario. Sustituye todos los acuerdos o negociaciones que se
puedan haber establecido con Brother o sus representantes.
• Esta garantía le otorga ciertos derechos y usted también puede gozar de derechos
adicionales en función del estado donde se encuentre.
• Esta garantía limitada (y la obligación de Brother para con el usuario) no puede
modificarse de ninguna forma a menos que el usuario y Brother firmen el mismo
documento en el que (1) se haga referencia a esta máquina y la factura con la fecha de
compra, (2) se describa la modificación de esta garantía y (3) se esté de acuerdo en la
aplicación de esa modificación.
Importante:
Le recomendamos que conserve todo el material de empaque original por si tuviera que
transportar la máquina.
Download from Www.Somanuals.com. All Manuals Search And Download.
Información importante
Si usted tiene alguna pregunta o necesita información acerca
de su producto Brother, le ofrecemos una variedad de opciones
entre las cuales puede elegir:
Servicio al cliente en Estados Unidos:
Customer Service
877-478-6824 (voz)
Customer Service
877-4-PTouch (voz)
Customer Service
901-379-1210 (fax)
Customer Service
custsrv@brother.com (correo electrónico)
Respuesta automática por fax
800-521-2846
Web
www.brother.com
Suministros / Accesorios
www.brothermall.com
u 888-879-3232
BROTHER INTERNATIONAL CORPORATION
100 SOMERSET CORPORATE BLVD.
BRIDGEWATER, NEW JERSEY 08807-0911
Por favor anote su modelo y el número de serie y la fecha y el
lugar de compra indicados abajo para sus archivos.
Conserve esta información junto con su comprobante de
compra (factura de venta) en caso de que su producto requiera
servicio técnico.
Modelo Nº _____________________________________________
Serie Nº_______________________________________________
Fecha de compra:_______________________________________
Nombre de la tienda donde lo compró:_______________________
1
2
3
4
5
6
7
8
9
1
INTRODUCCIÓN
Lista de caracteres acentuados .....................................................................30
Configuración de los atributos de caracteres...............................................................31
Opciones de fuente y tamaño ........................................................................32
Introducción de datos del código de barras...........................................................48
Impresión de una sola copia..................................................................................52
2
Qué hay que hacer cuando......................................................................................... 64
1
2
3
4
5
6
7
8
9
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCCIÓN
¡Muchas gracias por adquirir la etiquetadora P-touch PT-2100/2110.
Su nueva etiquetadora P-touch es un sistema de etiquetado fácil de utilizar y con
numerosas funciones que simplifica al máximo la creación de etiquetas profesionales
de gran calidad. Además de la sencilla creación de etiquetas mediante diseños
previamente establecidos, la etiquetadora P-touch incluye funciones de software de
edición como formato avanzado de etiquetas, formatos de bloque, códigos de barras
y funciones de numeración automática.
Lo que puede hacer
„
Creación de etiquetas con la etiquetadora P-touch
Prepare su etiquetadora P-touch.
1
Instale un cartucho
de cinta..
Encienda la
etiquetadora P-touch.
Instale las baterías y/o
conecte el adaptador
de corriente alterna.
Introduzca el texto de la etiqueta.
2
Introduzca el texto de la etiqueta
utilizando el teclado.
Además de permitir la introducción de
texto, su etiquetadora P-touch tiene
otras muchas funciones de edición.
"Cree etiquetas como éstas"
Imprima la etiqueta.
3
Puede comprobar el diseño de la etiqueta
antes de proceder a su impresión.
La vista previa de la etiqueta permite
revisarla antes de imprimirla con el fin de
evitar que se desperdicie cinta en etiquetas
incompletas.
Imprima la etiqueta que acaba de crear.
"Función Vista previa"
Lo que puede hacer
4
Download from Www.Somanuals.com. All Manuals Search And Download.
„ Creación de etiquetas con su computadora personal
Prepare su etiquetadora P-touch. (Consulte el paso 1 de la sección anterior.)
1
Prepare su computadora personal. *(El cable USB no se incluye con la compra del PT-2100.)
2
Instale el software.
* Conecte el cable
USB.
Encienda la P-touch.
Guía de instalación del software
Guía de instalación del software
Introduzca el texto de la etiqueta mediante el P-touch Quick Editor.
3
4
InicieP-touchQuick
Editor.
Introduzca el texto de la etiqueta en P-touch
Quick Editor.
Haga clic en el
área de creación
de diseño y
escriba "Brother".
Ayuda del software
Ayuda del software
Imprima la etiqueta.
La etiqueta se imprimirá.
Haga clic en el botón
"Imprimir".
1
2
3
4
5
6
7
Ayuda del software
Ayuda del software
Existen dos tipos de software de edición incluidos en este producto: P-touch Quick Editor
(software de edición de etiquetas sencillas) ideal para crear etiquetas sencillas y para crear
etiquetas con diseños más complejos, P-touch Editor (software de edición de etiquetas con
numerosas funciones).
"P-touch Editor"
"Cree etiquetas con complejos diseños como éstos"
8
9
Lo que puede hacer
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCCIÓN
Precauciones de seguridad
Para prevenir lesiones y daños incluimos notas importantes utilizando diversos símbolos.
Los símbolos y sus significados son los siguientes:
Le informa sobre lo que debe hacer para evitar el riesgo de
lesiones.
ADVERTENCIA
Le informa sobre los procedimientos que debe seguir para
evitar daños en la P-touch.
PRECAUCIÓN
Los símbolos que se utilizan en este manual son los siguientes:
Acción NO permitida
NO desmontar el producto.
NO salpicar ni sumergir en
agua.
NO tocar una parte concreta
del producto.
Acción obligatoria
Alerta de seguridad
Desenchufar
Alerta de la posibilidad de
electrocución
Precauciones de seguridad
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVERTENCIA
Adaptador de CA
Respete estas pautas para evitar incendios, descargas eléctricas o fallas.
Utilice sólo el adaptador de CA
(AD-24) diseñado exclusivamente
para este equipo. Si no se siguen
estas indicaciones, se podrían
producir un accidente o daños.
Brother no asume responsabilidad
alguna respecto a los accidentes o
daños causados por no utilizar el
adaptador de CA especificado.
En caso de tormenta eléctrica, deje de
utilizar la máquina y desenchufe el
cable de alimentación
inmediatamente. Puede existir un
riesgo remoto de electrocución a
causa de un rayo.
No toque el adaptador de CA ni el
enchufe de alimentación con las
manos mojadas.
No utilice el adaptador de CA en
lugares sumamente húmedos como,
por ejemplo, en baños.
No utilice un cable de alimentación
dañado.
No sobrecargue la toma de
alimentación.
No coloque objetos pesados sobre el
enchufe o el cable de alimentación, ni
dañe ni modifique el enchufe o el
cable de alimentación. No doble
excesivamente ni tire del cable de
alimentación.
No permita que el adaptador de CA se
caiga, reciba golpes o resulte dañado
de alguna otra forma.
Asegúrese de que el enchufe está
completamente insertado en la toma
de alimentación. No utilice una toma
eléctrica que esté suelte.
Baterías
Siga estas pautas para evitar derrames de líquido, calor excesivo o la rotura de la
batería.
1
No utilice artículos metálicos, como
pinzas o bolígrafos metálicos, al
cambiar las batteries.
No la arroje al fuego ni la caliente ni
intente desarmar la batería.
2
3
4
5
6
7
8
9
Precauciones de seguridad
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCCIÓN
P-touch
ADVERTENCIA
Siga estas instrucciones para evitar incendios, daños, electrocución y asfixia.
No permita que la P-touch se moje de
ningua manera.
No desarme la P-touch. Para revisar,
ajustar y reparar la P touch, póngase
-
No toque las piezas metálicas cerca
del cabezal de impresión. El cabezal
de impresión se calienta mucho
durante su uso y sigue muy caliente
inmediatamente después de usarlo.
No lo toque directamente con sus
manos.
en contacto con la tienda donde la
adquirió o con el centro de servicio
autorizado de su localidad.
Deseche correctamente las bolsas de
plástico y manténgalas fuera del
alcance de bebés y niños. Prohibido
ponerse las bolsas de plástico encima
o jugar con ellas.
Cabezal de
impresión
Desconecte el adaptador de corriente
alterna y retire las baterías
inmediatamente y deje de usar esta
unidad si nota algún olor o calor
extraños, decoloración, deformación
o cualquier cosa fuera de lo común
durante el uso o el almacenamiento
de esta unidad.
No deje caer ni golpee la P-touch, ni
permita que sufra otro tipo de
impactos.
No utilice la P-touch si cae algún
objeto extraño en su interior. Si cae
agua, alguna sustancia metálica o
algún objeto extraño en el interior de
la P-touch, desconecte el adaptador
de corriente alterna y saque las
baterías; seguidamente comuníquese
con la tienda donde adquirió la P-
touch o con el centro de servicio
autorizado de su localidad.
Precauciones de seguridad
8
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUCIÓN
Cortadora de cinta
Respete estas pautas para evitar lesiones corporales y daños a la P-touch.
No toque la hoja de la cortadora.
No abrir la tapa del compartimiento
de la cinta al trabajar con la unidad
cortadora.
No aplique una presión excesiva
sobre la cortadora.
Adaptador de CA
Asegúrese de desconectar el
adaptador de CA de la toma de
alimentación y la P-touch si no va
autilizar esta última durante un
período prolongado de tiempo.
Para desconectar el cable de
alimentación de la toma eléctrica, tire
siempre del enchufe.
Baterías
Siga estas pautas para evitar derrames de líquido, calor excesivo o la rotura de la batería.
No use baterías viejas y nuevas al
mismo tiempo.
No mezcle baterías alcalinas con
baterías de otro tipo.
No coloque los polos positivo y
negativo en la posición incorrecta.
Retire las baterías si no piensa usar
la P-touch durante un período
prolongado de tiempo.
1
P-touch
Respete estas pautas para evitar lesiones corporales y daños a la P-touch.
2
3
4
5
6
7
Coloque la P-touch en una superficie plana
y estable, como por ejemplo, un escritorio.
No coloque objetos pesados encima de la
P-touch. No presione la pantalla LCD.
Cinta
En función de la ubicación, material y condiciones ambientales, la etiqueta podría
despegarse o no poder eliminarse, y el color de la etiqueta podría cambiar o
transferirse a otros objetos.
Antes de pegar la etiqueta, compruebe la condición ambiental y el material.
Memoria
Los datos almacenados en la memoria se perderán si se produce una avería o si
se repara la P-touch, o si se agota la batería.
Si se desconecta el suministro eléctrico durante más de 2 minutos, se borrarán
todos los ajustes de texto y formato. También se borrarán todos los archivos de
texto guardados en la memoria.
8
9
Precauciones de seguridad
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCCIÓN
Precauciones generales
• No utilice la etiquetadora P-touch de manera o para fines distintos a los descritos en esta
guía. Si lo hace, podrían producirse accidentes o dañar el equipo.
• Utilice únicamente cintas Brother TZ con esta máquina. No utilice cintas que no tengan la
marca
.
• No tire ni empuje la cinta en el cartucho.
• No coloque ningún objeto extraño en la ranura de salida de la cinta, el conector del
adaptador de CA, el puerto USB, etc.
• No intente imprimir etiquetas con un cartucho vacío o sin un cartucho de cinta en la
etiquetadora P-touch. Si lo hace, el cabezal de impresión podría resultar dañado.
• No toque el cabezal de impresión con los dedos.
• No limpie la máquina con alcohol u otros disolventes orgánicos. Use únicamente un paño
suave y seco.
• No coloque la etiquetadora P-touch de forma que quede expuesta a la luz solar directa,
cerca de calentadores u otras fuentes de calor, ni en ningún lugar donde quede expuesta
a temperaturas extremadamente altas o bajas, a una humedad elevada o a mucho polvo.
Rango de temperatura de funcionamiento estándar: 50°F a 95°F (10° C a 35 °C).
• Se recomienda utilizar el cable USB que viene con la P-touch. (El cable USB no se incluye
con la compra del PT-2100.) Si se debe utilizar otro cable USB, asegúrese de que sea un
cable de alta calidad.
• Tenga cuidado de no rayar el CD-ROM. No coloque el CD-ROM en un lugar donde quede
expuesto a temperaturas muy elevadas o muy bajas. No coloque objetos pesados sobre
el CD-ROM ni lo doble.
• El software incluido en el CD-ROM está diseñado para utilizarlo con la etiquetadora P-
touch y se puede instalar en más de una PC.
• Recomendamos enfáticamente que usted lea esta Guía del usuario con detenimiento
antes de usar su etiquetadora P-touch y conserve esta guía a mano para que le sirva de
referencia en el futuro.
Símbolos utilizados en esta guía
Los siguientes símbolos se utilizan a lo largo de toda esta guía para ofrecer
información adicional.
Este símbolo proporciona información o instrucciones que, si se ignoran, podrían
provocar daños o lesiones personales, u operaciones que pueden provocar un
:
funcionamiento incorrecto.
Este símbolo proporciona información o instrucciones que podrían ayudarle a
comprender mejor o a utilizar la etiquetadora P-touch con mayor eficiencia.
:
Precauciones generales
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Esta sección lepermite acceder de forma rápida y
sencilla a la información acerca de las tareas que los
usuarios suelen utilizar con más frecuencia. Sólo hay
que buscar la tarea aquí debajo y, a continuación, ir
a la página indicada. Si no encuentra aquí la tarea
que está buscando, intente encontrarla en el índice o
en el contenido de la guía.
ABC
ABC
Para introducir texto,
símbolos y caracteres
acentuados...
Para cambiar la
configuración de corte
y márgenes
Para cambiar el
formato de la etiqueta...
Introducción de
texto/símbolos/caracteres
acentuados
Funciones de formato
de texto/etiqueta
Opciones de corte de cinta
1
auto-format
function
2
3
4
5
6
7
1
2
3
ABC
Para guardar un
diseño de etiqueta...
Dar formato a las
etiquetas fácilmente...
Para imprimir varias
copias (con numeración
automática)...
Funciones de varias
copias/numeración automática
Función de memoria
de archivo
Función de autoformato
8
9
Guía rápida
11
Download from Www.Somanuals.com. All Manuals Search And Download.
PARA EMPEZAR
Desembalaje de la etiquetadora P-touch
Compruebe que el paquete contiene los siguientes elementos antes de utilizar la
etiquetadora P-touch.
Etiquetadora P-touch PT-2100
Cartucho de cinta TZ
(Cartucho de arranque)
CD-ROM
Cable USB
(Controladores, paquete de software (El cable USB no se incluye con la
de edición de etiquetas)
compra del PT-2100.)
AD-24
Guía de usuario
Guía de instalación del software
Desembalaje de la etiquetadora P-touch
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Descripción general
Tapa del compartimiento
de la cinta
Compartimiento del cartucho
Visor de cinta
Ranura de salida
de la cinta
Pantalla LCD
Teclado
Palanca de
liberación
Cortadora
de cinta
Cabezalde
impresión
Cuando se recibe de fábrica, la tapa del compartimento de cinta y la pantalla
LCD están cubiertas por una lámina para evitar daños. Quite dicha lámina
antes de utilizar la etiquetadora P-touch.
Tapadelcompartimiento
de baterías
Conector del
adaptador de CA
1
2
3
4
5
6
7
Compartimiento de baterías
Puerto USB
8
9
Descripción general
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PARA EMPEZAR
Pantalla LCD y teclado
Pantalla LCD
4
5
6
7
8
9
10
1
2
3
1. Número de línea
Aparece al principio de cada línea, esta marca indica el número de línea dentro
del diseño de la etiqueta.
2. Cursor
Indica la posición actual del cursor. Los nuevos caracteres se introducen a la
izquierda del cursor, y el caracter a la izquierda del cursor se borra cuando se
oprime la tecla
.
3. Marca de retorno
Indica el final de una línea de texto.
4. Modo "Caps" (Bloqueo de mayúsculas)
Indica que el modo Caps está activado.
5.~8. Guía de estilo
Indica la configuración actual de la fuente (5), el tamaño (6) del caracter, el
estilo (7) del caracter y el marco (8).
9. Longitud de la cinta
Indica la longitud aproximada de la etiqueta con el texto introducido en la
máquina.
10.Selección del cursor
Indica que puede utilizar las teclas de cursor para seleccionar los elementos de
la pantalla. Utilice las teclas
y
para seleccionar una opción del menú y las
teclas para cambiar la configuración.
y
contraste de la pantalla LCD.
Pantalla LCD y teclado
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Funciones y nombre de las teclas
7
8
9
10 11
1
2
4
3
5
6
12
13
14
15
17
18
15
16 19
20 21 22
5.
1.
2.
(Encendido):
:
Enciende y apaga la etiquetadora P-touch. • Imprime el diseño de etiqueta actual en
la cinta.
(
):
• Abre el menú "Print Options" (Opciones
de impresión) cuando se utiliza junto
Desplaza el cursor en la dirección de la
flecha cuando se introducen o editan
caracteres, cuando se introducen
1
con la tecla
.
2
3
4
5
6
7
símbolos o caracteres acentuados, y
cuando se configuran los atributos de la
etiqueta en los menús de funciones.
6. :
• Muestra una vista previa de la etiqueta.
• Hace avanzar 0.92" (23 mm) de cinta
en blanco y, a continuación, la corta
automáticamente, si se usa en
3.
4.
:
Selecciona la opción mostrada cuando
se configuran los atributos de la
etiqueta en los menús de funciones, o
cuando se introducen símbolos o
caracteres acentuados.
combinación con la tecla
.
7.
:
Abre el menú Archivo donde podrá
imprimir, guardar, abrir o borrar las
etiquetas que utilice frecuentemente
en la memoria de archivos.
(Escape):
Cancela el comando actual y regresa a
la pantalla de introducción de datos o al
paso anterior.
8
9
Pantalla LCD y teclado
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PARA EMPEZAR
8.
•
:
16.
17.
:
Abre el menú "Text" (Texto), en el que se
pueden establecer los atributos de los
caracteres que se utilizan en la etiqueta.
Utilice esta función para seleccionar e
introducir un símbolo de la lista de
símbolos disponibles.
• Los atributos de caracteres pueden
ajustarse para cada línea de la
(Retroceso):
• Borra el caracter situado a la izquierda
del cursor.
• Borra todo el texto introducido o todos
los ajustes de texto y etiqueta actual si se
etiqueta, si se abre el menú de Texto en
combinación con la tecla
:
Abre el menú "Label" (Etiqueta), en el
que se pueden establecer los atributos
de etiqueta para la etiqueta en cuestión.
.
9.
usa en combinación con la tecla
.
18.
:
• Introduce una línea nueva durante la
introducción de texto.
10.
:
Abre el menú "Setup" (Configuración), en
el que se pueden establecer las
preferencias de funcionamiento para la
etiquetadora P-touch.
• Introduce un nuevo bloque si se utiliza
en combinación con la tecla
.
19.
(Formato automático):
Abre el menú "Auto-Format" (Formato
automático), en el que puede crear
etiquetas mediante las plantillas
predefinidas o los formatos de bloque.
20.
• Introduce un espacio en blanco.
• Recupera el valor por defecto de la
configuración.
11.
:
Borra todo el texto introducido, o todo el
texto y los ajustes actuales de etiquetas.
12.
~
:
:
• Utilice estas teclas para escribir letras o
números.
• Las letras en mayúsculas y los símbolos
se pueden introducir usando estas teclas
21.
:
en combinación con la tecla
tecla
o la
• Abre la pantalla de Ajustr códig de
barras para introducir los datos de
código de barras.
• Abre la pantalla de configuración de
código de barras para establecer los
parámetros de código de barras si se
utiliza en combinación con la tecla
.
.
13.
:
Inserta una tabulación en la posición
del cursor en la pantalla de introducción
de texto.
14.
:
Activa y desactiva el modo Caps
(Bloqueo de mayúsculas). Cuando este
modo está activado, se pueden introducir
letras en mayúsculas oprimiendo
simplemente una tecla de letra.
22.
:
Utilice esta opción para seleccionar e
introducir un caracter acentuado.
15.
:
Utilice esta tecla junto con las teclas de
letras o de números deseadas para
escribir las letras en mayúsculas o los
símbolos indicados en las teclas
numéricas.
Pantalla LCD y teclado
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Alimentación eléctrica
Baterías
Dé la vuelta al etiquetador P-touch y quite la tapa
del compartimento de las baterías. Si las baterías
ya están en la máquina, retírelas.
1
Si está sustituyendo las baterías, asegúrese
de que el etiquetador está apagado antes de
abrir el compartimento de las baterías.
Inserte seis pilas alcalinas nuevas de tamaño AA
(LR6), asegurándose de que sus polos positivos
(+) y negativos (-) coinciden con las marcas
positivas (+) y negativas (-) dentro del
compartimento para pilas.
2
23
Cambie siempre las seis pilas al mismo
tiempo por pilas nuevas.
Inserte la tapa del compartimiento de la batería
encajando los tres ganchos en la parte inferior
dentro de las ranuras en la máquina y
oprimiéndolos firmemente hasta que entren a
presión en su sitio.
3
1
2
3
4
5
6
7
PRECAUCIÓN
Si no va a usar el etiquetador P-touch durante un largo periodo de tiempo, es
recomendable quitar las baterías.
8
9
Alimentación eléctrica
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PARA EMPEZAR
Adaptador de CA
Conecte el adaptador de CA directamente a la etiquetadora P-touch.
Inserte el enchufe del cable del adaptador de CA en el conector marcado DC IN
9-9.5 V de la etiquetadora P-touch.
1
Inserte el enchufe del adaptador de CA en una toma eléctrica estándar.
2
• Apague la etiquetadora P-touch antes de desconectar el adaptador de CA.
• No tire del cable del adaptador de CA ni lo doble.
Para proteger y hacer una copia de seguridad de la memoria del etiquetador, cuando se desenchufe
el etiquetador CA, se recomienda disponer de baterías alcalinas AA (LR6) instaladas en la máquina.
ADVERTENCIA
• Utilice sólo el adaptador de CA (AD-24) diseñado exclusivamente para este equipo.
Si no se siguen estas indicaciones, se podrían producir un accidente o daños.
Brother no asume responsabilidad alguna respecto a los accidentes o daños
causados por no utilizar el adaptador de CA especificado.
• No conecte el adaptador de CA a una toma eléctrica no estándar. Si no se siguen
estas indicaciones, se podrían producir un accidente o daños. Brother no asume
responsabilidad alguna frente a los accidentes o daños causados por no utilizar
una toma eléctrica estándar.
PRECAUCIÓN
• Desconecte el adaptador de CA de la P-touch y de la toma eléctrica si no va a
utilizar la P-touch durante un período prolongado de tiempo.
• Si se desconecta el suministro eléctrico durante más de 2 minutos, se borrarán
todos los ajustes de texto y formato. También se borrarán todos los archivos de
texto guardados en la memoria.
Alimentación eléctrica
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Instalación de un cartucho de cinta
Este etiquetador P-touch admite cartuchos de cinta de anchuras 9/64", 1/4", 3/8", 1/2"
ó 3/4" (3.5 mm, 6 mm, 9 mm, 12 mm ó 18 mm).
• Si el cartucho nuevo tiene algún tipo de protección de cartón,
asegúrese de quitársela antes de insertar el cartucho en la
etiquetadora.
• Si la cinta de tinta está suelta, haga girar con el dedo la rueda
dentada en la dirección de la flecha tal y como se muestra en el
cartucho de cinta.
Compruebe que el extremo de la cinta no
está doblado y que pasa por la guía de la
cinta. Si la cinta no pasa a través, pásela a
través de la guía de cinta consultando la
ilustración.
Extremo de la cinta
1
2
Guía de la cinta
1
Asegúrese de que el etiquetador P-touch está
apagado, a continuación, levante la tapa del
2
3
4
5
6
7
compartimento del cartucho de cinta. Si ya hay un
cartucho de cinta instalado en la máquina, quítelo
levantando el cartucho de cinta hacia arriba.
8
9
Instalación de un cartucho de cinta
Download from Www.Somanuals.com. All Manuals Search And Download.
19
PARA EMPEZAR
Inserte el cartucho de cinta bajándolo
3
en el compartimento de cinta, con el
extremo de la cinta orientado hacia la
ranura de salida de cinta de la máquina.
Empuje firmemente el cartucho de cinta
hasta que oiga un clic.
Cuando inserte el cartucho de
cinta, asegúrese de que la cinta de
etiquetas y la cinta de tinta no
queden atrapadas en el cabezal de
impresión.
Ranura de salida
de la cinta
Cierre la tapa del compartimiento de
cinta.
4
Asegúrese de que la palanca de
liberación está hacia arriba
cuando cierre la tapa del
compartimento de cinta. La tapa
del compartimiento de cinta no se
puede cerrar si la palanca de
liberación está hacia abajo.
Palanca de liberación
• Asegúrese de hacer avanzar la cinta para que no quede holgura alguna en ella ni en
la cinta de tinta después de introducir el cartucho de cinta. Consulte la sección
• No tire de la etiqueta que sale por la ranura de salida de la cinta. Si lo hace, la
cinta de tinta saldrá expulsada junto con la propia cinta de etiquetas.
• Guarde los cartuchos en un lugar fresco y oscuro, alejado de la luz solar directa y de
temperaturas excesivas, elevada humedad o polvo. Utilice el cartucho de cinta lo más
rápidamente posible después de abrir el paquete sellado en el que viene.
Instalación de un cartucho de cinta
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Encendido y apagado
Oprima la tecla
para encender la etiquetadora P-touch.
Vuelva a oprimir la tecla
P-touch.
para apagar la etiquetadora
• Su etiquetadora P-touch tiene una función de ahorro de energía con la que se apaga
automáticamente si no se oprime alguna tecla durante un determinado periodo de
tiempo y en determinadas condiciones de funcionamiento. Consulte abajo la tabla
"Desconexión automática" para obtener información más detallada.
• Si las baterías están instaladas o el etiquetador P-touch está conectado a una toma
eléctrica mediante el adaptador de CA, cuando se enciende el equipo se muestra en
pantalla la información relativa a la sesión anterior.
zDesconexión Automáticaz
Sólo la etiquetadora
conectada a una PC
P-touch
Con adaptador de CA /
Con la batería
5 minutos
60 minutos
1
2
3
4
5
6
7
8
9
Encendido y apagado
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PARA EMPEZAR
Avance de la cinta
Avanzar y cortar
Esta función hará avanzar la cinta a 0.92" (23 mm) aproximadamente y la cortará,
produciendo una etiqueta en blanco. Esta acción puede ser necesaria al instalar
un nuevo cartucho de cinta para eliminar una comba en la cinta o garantizar la
correcta alimentación de cinta.
Mantenga pulsada la tecla
El mensaje "Aliment.&corte?" aparece en la pantalla.
y pulse la tecla
.
1
2
Mediante seleccione la opción "Aliment.&corte" y pulse
o
o
.
El mensaje "Alimentando cinta... Espere" aparece cuando la cinta avanza y, a
continuación, se corta la cinta.
Para salir o cancelar esta función pulse
.
Solo avanzar
Esta función hará avanzar la cinta 0.92" (23 mm) aproximadamente haciendo que
salga una etiqueta en blanco del cartucho de cinta. Esta acción se recomienda cuando
utilice cintas adhesivas de tela o extra fuertes, que haya que cortar con tijeras.
Mantenga pulsada la tecla
Aparece "Aliment.&corte?" en la pantalla.
y pulse la tecla
.
1
2
Mediante , seleccione la opción "Sólo aliment." y pulse
o
o
.
El mensaje "Alimentando cinta... Espere" aparece mientras se alimenta la cinta.
Para salir o cancelar esta función pulse
.
Avance de la cinta
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Pantalla LCD
Contraste de la pantalla LCD
Esta función permite al usuario ajustar el contraste de la pantalla LCD para facilitar la
lectura en pantalla. Existen cinco niveles de oscuro (+2) a claro (-2) el ajuste por defecto
de fábrica es “0”.
Oprima la tecla
Configuración, seleccione “Contraste de pantalla”
oprimiendo la tecla
oprima la tecla
para que aparezca el menú
1
2
3
o la tecla
o la tecla
y seguidamente
.
Seleccione un nivel de contraste con la tecla
El contraste de la pantalla cambia cada vez que se
oprime la tecla , permitiéndole establecer el
contraste más adecuado.
o
.
o
Oprima la tecla
o
.
• Oprima la tecla
• Si pulsa la tecla
para regresar al paso anterior.
durante la función de contraste, el ajuste volverá a "0".
1
2
3
4
5
6
7
8
9
Pantalla LCD
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PARA EMPEZAR
Ajuste del idioma y las unidades
Idioma
Seleccione el idioma ("English", "Español", "Français", "Italiano", "Magyar",
"Nederlands", "Norsk", "Poliski", "Português", "Suomi", "Svenska", "
",
"Dansk" o "Deutsch") para los comandos de menú y los mensajes que aparecen
en la pantalla LCD.
El ajuste por defecto es "English".
Oprima la tecla
Configuración, seleccione "Language" (Idioma)
oprimiendo la tecla y seguidamente oprima la
tecla
para mostrar el menú de
1
o
o
.
Seleccione un idioma con la tecla
o la tecla
.
2
3
Oprima la tecla
o
.
Oprima la tecla
para regresar al paso anterior.
Unidad
Seleccione la unidad ("pulgadas" o "mm") con la que desea que se indiquen las
medidas en la pantalla LCD.
El ajuste por defecto es "pulgadas".
Oprima la tecla
Configuración, seleccione "Unidad" oprimiendo la
para mostrar el menú de
1
tecla
tecla
o la tecla
y seguidamente oprima la
o
.
Seleccione una unidad con la tecla
o la tecla
.
2
3
Oprima la tecla
o
.
Oprima la tecla
para regresar al paso anterior.
Ajuste del idioma y las unidades
24
Download from Www.Somanuals.com. All Manuals Search And Download.
EDICIÓN DE ETIQUETAS
Introducción y edición de texto
La utilización del teclado de la etiquetadora P-touch es muy similar a como se utiliza el
teclado de una máquina de escribir, un procesador de textos o una computadora.
Introducción de texto mediante el teclado
•
Para introducir una letra en minúscula o un número, basta con oprimir la tecla deseada.
• Para introducir un espacio en blanco en el texto, oprima la tecla
• Para introducir una letra en mayúsculas o uno de los símbolos que aparecen en la
.
parte superior de las teclas numéricas, mantenga oprimida la tecla
continuación, oprima la tecla deseada.
y, a
• Para introducir letras en mayúsculas siempre, oprima la tecla
para activar el
modo "Caps" (Bloqueo de mayúsculas) y, a continuación, oprima las teclas deseadas.
• Para desactivar el modo Caps, vuelva a oprimir la tecla
.
• Para introducir una letra en minúscula en el modo Caps, mantenga oprimida la tecla
y, a continuación, oprima la tecla deseada.
Adición de una nueva línea
• Para poner fin a la línea actual de texto y empezar una nueva línea , oprima la tecla
. Aparecerá una marca de retorno al final de la línea y el cursor pasa al comienzo
de una nueva línea.
• En cada ancho de cinta sólo se puede introducir un número máximo de líneas de texto.
Se puede introducir un máximo de 5 líneas para la cinta de 3/4" (18 mm), 3 líneas para
la cinta de 1/2" (12 mm), 2 líneas para las cintas de 3/8" (9 mm) y de 1/4" (6 mm), y
1 línea para la cinta de 9/64" (3.5 mm).
• Si pulsa la tecla cuando ya hay el máximo de líneas, aparecerá un mensaje de error.
• Para cambiar el atributo de los caracteres de cada línea, consulte la sección “Ajuste
1
2
3
4
5
6
7
Adición de un nuevo bloque
• Para crear un nuevo bloque de texto/líneas a la derecha de su texto actual, oprima
la tecla mientras mantiene oprimida la tecla
del bloque y el cursor pasa al comienzo de un nuevo bloque.
. Aparecerá una marca al final
Es posible introducir un máximo de 5 bloques en una etiqueta.
Desplazamiento del cursor
• Para desplazar el cursor hacia la izquierda, derecha, arriba o abajo, oprima las
teclas
,
o
. Cada vez que oprima la tecla desplazará el cursor un espacio
o una línea.
• Para llevar el cursor al principio o al final de la línea actual, mantenga oprimida la
tecla y seguidamente oprima las teclas
• Para llevar el cursor al principio o al final del texto, mantenga oprimida la tecla
y seguidamente oprima las teclas
8
9
o
.
o
.
Introducción y edición de texto
25
Download from Www.Somanuals.com. All Manuals Search And Download.
EDICIÓN DE ETIQUETAS
Inserción de texto
• Para insertar texto adicional en una línea de texto existente, coloque el cursor a la
derecha del caracter donde desea insertar el texto y, a continuación, introduzca el
texto adicional. El texto nuevo se insertará a la izquierda del cursor.
Para insertar una tabulación
• Para insertar un espacio de tabulación entre la línea de texto existente, lleve el
cursor donde desea añadir la tabulación y oprima la tecla
. Aparece una marca
para indicar la posición donde se introducirá el espacio de tabulación.
• Para cambiar el ajuste de longitud de la tabulación, consulte la sección “Configuración de
• También se puede introducir el espacio de tabulación oprimiendo la tecla
para abrir
el menú de Configuración y seleccionando "Tabulado" con la tecla
o la tecla
y, a
continuación, oprimiendo la tecla
o
.
Eliminación de texto
„ Eliminación de un caracter cada vez
• Para eliminar un caracter de una línea de texto existente, coloque el cursor a la
derecha del caracter donde desea comenzar a borrar el texto y, a continuación,
oprima la tecla
. El caracter situado a la izquierda del cursor se borra cada vez
que oprime la tecla
.
Si mantiene oprimida la tecla
, los caracteres a la izquierda del cursor se borran uno tras otro.
„ Eliminación de todo el texto de una sola vez
• Utilice la tecla
para borrar todo el texto de una sola vez.
Pulse la tecla
Aparecerán las opciones de Borrado.
.
1
Oprimiendo las teclas
o
, seleccione “Sólo texto”
2
3
para borrar todo el texto conservando los ajustes de
formato actuales o seleccione “Text&formato” para
borrar todos los ajustes de texto y formato.
Oprima la tecla
introducción de texto sin eliminar (o borrar) el
texto o el formato.
para regresar a la pantalla de
Oprima la tecla
o
.
Se eliminará todo el texto. Todos los valores de
formato se eliminan también si se selecciona "Text &
formato".
Introducción y edición de texto
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducción de símbolos
Además de los símbolos disponibles en el teclado, hay diversos símbolos (incluidos los
caracteres extendidos ASCII y los caracteres internacionales) disponibles con la
función de símbolos.
Hay dos métodos para introducir símbolos:
• Con la tecla
.
• Utilización de la función de símbolos.
Introducción de símbolos con la tecla
Los símbolos impresos en la esquina superior derecha de las teclas del teclado se
pueden introducir con la tecla
.
• Para introducir uno de estos símbolos, mantenga oprimida la tecla
continuación, oprima la tecla deseada.
y, a
Introducción de símbolos con la función de símbolos
Oprima la tecla
Aparecerá una lista de categorías de símbolos y
.
1
símbolos de esa categoría.
El último símbolo introducido se selecciona en la
lista que aparece en pantalla.
Seleccione una categoría de símbolos (puntuación,
2
3
negocios, matemáticas, etc.) oprimiendo la tecla
o la tecla repetidamente y seleccione
después un símbolo oprimiendo la tecla
o
o
.
1
Oprima la tecla
o
.
2
3
4
5
6
7
El símbolo seleccionado se insertará en la línea de
texto.
• Oprima la tecla
para regresar al paso anterior.
de todos los grupos y símbolos disponibles.
8
9
Introducción de símbolos
27
Download from Www.Somanuals.com. All Manuals Search And Download.
EDICIÓN DE ETIQUETAS
zLista de símbolosz
Categoría
Puntuación
Negocios
Matemáticas
Paréntesis
Flecha
Símbolos
Unidad
Internacional
Número
Pictograma
Electricidad
Otros
El uso de la marca CE está regulado rigurosamente por una o más directivas del
Consejo Europeo. Compruebe si las etiquetas que usted produce y que llevan esta
marca cumplen las directivas correspondientes.
Introducción de símbolos
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducción de caracteres acentuados
La etiquetadora P-touch puede mostrar e imprimir una serie de caracteres acentuados
como es el caso de los caracteres específicos de otros idiomas.
Introduzca el caracter que desea cambiar a un
caracter compuesto.
1
El modo "Caps" (Bloqueo de mayúsculas) se
puede utilizar junto con la función de acentos.
Oprima la tecla
El caracter que introdujo cambiará a un caracter
acentuado.
.
2
3
Oprima la tecla
seleccionar el caracter acentuado deseado o
selecciónelo utilizando las teclas
repetidamente hasta
o
.
El orden de los caracteres compuestos que
aparecerán en la pantalla será diferente según el
idioma seleccionado para la pantalla LCD.
Oprima la tecla
El caracter compuesto seleccionado se insertará en
la línea de texto.
o
.
4
1
• Oprima la tecla
para regresar al paso anterior.
completa de los caracteres acentuados disponibles.
2
3
4
5
6
7
8
9
Introducción de caracteres acentuados
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuración de los atributos de caracteres
Ajuste de los atributos de caracteres por etiqueta
Oprimiendo la tecla
, usted puede seleccionar una fuente y aplicar atributos de
tamaño, ancho, estilo, línea y alineación.
Oprima la tecla
Los valores configurados actuales aparecen en
pantalla.
.
1
2
3
Seleccione un atributo oprimiendo la tecla
tecla y seguidamente ajuste un valor para ese
atributo oprimiendo la tecla o la tecla
o la
.
Oprima la tecla
o
para aplicar los ajustes.
La nueva configuración NO SE APLICA si usted
no oprime la tecla o la tecla
.
• Oprima la tecla
• Oprima la tecla
para regresar al paso anterior.
para que el atributo seleccionado recupere su valor por defecto.
• Consulte la tabla Opciones de configuración para obtener una lista de todos los
valores disponibles.
• Los caracteres pequeños pueden resultar difíciles de leer cuando se aplican
determinados estilos (por ejemplo, Sombreado + Cursiva).
1
Ajuste de los atributos de caracteres por cada línea
2
3
4
5
6
7
Cuando una etiqueta consiste en dos o más líneas de texto, usted puede ajustar un
valor diferente de atributos de caracteres (fuente, tamaño, ancho, estilo, línea y
alineación) para cada línea.
Desplace el cursor hasta la línea en la que desea
cambiar el atributo de caracteres oprimiendo la tecla
o
y seguidamente oprima la tecla
mientras
mantiene oprimida la tecla
para mostrar los
atributos. ( en la pantalla indica que ahora está
aplicando el atributo sólo para esa línea específica).
Cuando se establezca un valor diferente de atributo para cada
8
9
línea, el valor se mostrará como **** al oprimir la tecla
Al cambiar el ajuste en esta pantalla oprimiendo las teclas
.
o
, se aplicará el mismo cambio a todas las líneas de la etiqueta.
Configuración de los atributos de caracteres
31
Download from Www.Somanuals.com. All Manuals Search And Download.
EDICIÓN DE ETIQUETAS
zOpciones de fuente y tamañoz
Atributo
Valor
Resultado
HEL
(Helsinki)
BRU
(Bruselas)
Fuente
FLO
(Florida)
CAL
(Calgary)
Al seleccionar Auto, el texto se ajusta
automáticamente para imprimirse con el
mayor tamaño disponible para cada ancho
de cinta.
Auto
42pt
36pt
24pt
18pt
12pt
9pt
Tamaño
6pt
Configuración de los atributos de caracteres
32
Download from Www.Somanuals.com. All Manuals Search And Download.
zOpciones de anchura y estiloz
Atributo
Valor
Resultado
x2
x1
Ancho
x2/3
x1/2
Apgdo
(desactivado)
Negrt
(Negrita)
Contr
(Perfilado)
Sombra
(Sombreado)
Sólido
1
Cursv
(Cursiva)
2
3
4
5
6
7
Estilo
C+Neg
(Cursiva negrita)
C+Con
(Cursiva perfilada)
C+Som
(Cursiva sombreada)
C+Sól
(Cursiva sólida)
8
9
Vertcl
(Vertical)
Configuración de los atributos de caracteres
33
Download from Www.Somanuals.com. All Manuals Search And Download.
EDICIÓN DE ETIQUETAS
Atributo
Valor
Resultado
Apgdo
(desactivado)
Subray
(Subrayado)
Línea
Tachd
(Tachado)
Izqda.
Centro
Derch
Alinear
(Alineación)
Just
(Justificar)
Configuración de los atributos de caracteres
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Ajuste del estilo de encaje automático
Si "Tamaño" se ajusta a "Auto" y "Longitud" se ajusta a una longitud específica,
usted puede seleccionar la forma de reducir el tamaño del texto para adaptarlo
a la longitud de la etiqueta.
Si se selecciona “Tamaño del texto”, el tamaño total del texto se modifica para
encajarlo dentro de la etiqueta.
Si se selecciona "Ancho del texto", el ancho del texto se reducirá al tamaño del
ajuste de x1/2. (Si se desea una mayor reducción de tamaño para que el texto
pueda caber en la longitud de etiqueta seleccionada, el tamaño total del texto se
modificará después de reducir el ancho del texto al ajuste de x1/2.)
Oprima la tecla
Configuración, seleccione "Estilo de autoajuste"
oprimiendo la tecla , y seguidamente oprima la
tecla
para mostrar el menú de
1
o
o
.
Aparece la pantalla Estilo de autoajuste.
Seleccione el estilo oprimiendo la tecla
.
o la tecla
2
3
Oprima la tecla
o la tecla
para aplicar el ajuste.
• Oprima la tecla
• Oprima la tecla
texto").
para regresar al paso anterior.
para ajustar el estilo al valor por defecto ("Tamaño del
1
2
3
4
5
6
7
8
9
Configuración de los atributos de caracteres
35
Download from Www.Somanuals.com. All Manuals Search And Download.
EDICIÓN DE ETIQUETAS
Configuración de los atributos de etiqueta
Oprimiendo la tecla
, usted puede crear una etiqueta con un marco alrededor
del texto y especificar la longitud y tabulación de la etiqueta. (Las opciones de
corte que pueden ser necesarias al imprimir una etiqueta también se pueden
ajustar pulsando la tecla
. Consulte las “Opciones de corte de cinta” en la
Oprima la tecla
Los valores configurados actuales aparecen en
pantalla.
.
1
2
Seleccione un atributo oprimiendo la tecla
y seguidamente ajuste un valor para ese atributo
oprimiendo las teclas
o
o
.
• Al establecer la longitud de la tabulación,
mantenga oprimida la tecla
el valor más rápidamente.
o
para cambiar
• Al establecer la longitud de la etiqueta, consulte
Oprima la tecla
o
para aplicar los ajustes.
3
La nueva configuración NO SE APLICA si usted
no oprime la tecla
o
.
• Oprima la tecla
• Oprima la tecla
defecto.
para regresar al paso anterior.
para que el atributo seleccionado recupere su valor por
• Consulte la tabla Opciones de configuración para obtener una lista de todos los
valores disponibles.
Configuración de los atributos de etiqueta
36
Download from Www.Somanuals.com. All Manuals Search And Download.
EDICIÓN DE ETIQUETAS
Atributo
Valor
Resultado
15
16
Marco
La longitud de la etiqueta se puede ajustar entre 1.2" (30 mm)
y 12.0" (300 mm). Al seleccionar Auto, la longitud de la etiqueta
se ajusta automáticamente dependiendo del texto introducido.
Longitud
La longitud de la tabulación se puede ajustar entre 0.0" (0 mm)
y 4.0" (100 mm). El ajuste predeterminado es 2.0" (50 mm).
Longitud Tab
Utilización de diseños de formato automático
La función de Formato automático le permite crear rápida y fácilmente etiquetas
para diversos fines, por ejemplo, pestañas de archivos, etiquetas de equipos, placas
de identificación, etc. Sólo tiene que seleccionar un diseño entre las plantillas o entre
los diseños de bloque disponibles, introducir el texto y aplicar el formato deseado.
También puede utilizar símbolos y caracteres acentuados en los diseños de formato
automático.
Utilización de plantillas; ejemplo de creación de una Etiqueta de
activos
Oprima la tecla
Auto-Format (Formato automático) y, a
continuación, seleccione “Plantillas” con la tecla
para que aparezca la pantalla
1
2
3
o
.
Oprima la tecla
Aparecerá la última plantilla utilizada.
o
.
Seleccione una plantilla oprimiendo la tecla
o
.
Utilización de diseños de formato automático
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Oprima la tecla
Aparece la pantalla "Estilo".
o
.
4
5
6
7
Seleccione un atributo oprimiendo la tecla
o
y seguidamente ajuste un valor para ese atributo
oprimiendo las teclas
o
.
Oprima la tecla
Aparece la pantalla “Ajustr códig barrs”.
o
.
Seleccione un atributo oprimiendo la tecla
o la
tecla
y seguidamente ajuste un valor para ese
atributo oprimiendo la tecla
o
.
El atributo "Dígito cntrl" sólo está disponible para
los protocolos CODE39, I-2/5 y CODABAR.
Oprima la tecla
Aparece la pantalla de introducción de texto en la plantilla.
o
.
8
Puede utilizar el modo "Caps" (Bloqueo de
mayúsculas) para introducir texto.
Introduzca el texto y seguidamente oprima la tecla
Repita este proceso para cada campo de texto.
o
.
9
1
Después de haber introducido texto en todos los campos,
2
3
4
5
6
7
aparece el menú Imprimir si se oprime la tecla
o
.
Seleccione "Imprimir" oprimiendo la tecla
o la tecla
y seguidamente
10
oprima la tecla
o
para imprimir la etiqueta.
• Seleccione "Editar" para cambiar los datos de texto o la configuración de estilo.
• Seleccione "Guardar" para guardar la etiqueta en la memoria de archivos.
• Seleccione "Salir" para salir de la función de formato automático.
8
9
Utilización de diseños de formato automático
39
Download from Www.Somanuals.com. All Manuals Search And Download.
EDICIÓN DE ETIQUETAS
• Oprima la tecla
para regresar al paso anterior.
• En las pantallas Estilo y Ajustr códig barrs, oprima la tecla
atributo seleccionado recupere su valor por defecto.
para que el
plantillas disponibles.
• Aparecerá el mensaje "¿Borrar todo el texto?" al pulsar la tecla
o la tecla para borrar todo el texto u oprima la tecla
archivo.
• Para imprimir múltiples copias, numeradas secuencialmente, o una imagen espejo de
la etiqueta, acceda al menú de impresión, mantenga oprimida la tecla y oprima
la tecla para que aparezca el menú "Print Options" (Opciones de impresión).
. Oprima la tecla
para no borrar el
• Si el ancho del cartucho de cinta actual no coincide con el ancho establecido para el
diseño seleccionado, aparecerá un mensaje de error cuando intente imprimir la
etiqueta. Oprima la tecla
, o cualquier otra, para borrar el mensaje de error e
introduzca un cartucho de cinta que tenga el ancho correcto.
• Si el número de caracteres introducido supera el límite, aparecerá un mensaje de error
cuando oprima la tecla
o
. Oprima la tecla
, o cualquier otra, para borrar el
mensaje de error y editar el texto para que tenga menos caracteres.
Salvo que esté definido "Sin corte", al utilizar la función de Autoformato, la etiqueta se cortará
con un margen en los bordes izquierdo y derecho, independientemente de la configuración
activa de la Opción de corte de cinta (consulte la página 55).
•
Utilización de diseños de formato automático
40
Download from Www.Somanuals.com. All Manuals Search And Download.
zPlantillasz
Atributo
Valor
Detalles
Lomo de
carpeta
(3/4" x 8.6" [18 mm x 219 mm])
(1/2" x 3.2" [12 mm x 82 mm])
(1/2" x 1.6" [12 mm x 42 mm])
Pestaña de
archivador
Pestaña de
divisor
Etiqueta de
inventario
(3/4" x 2.7" [18 mm x 70 mm])
(3/4" x 3.0" [18 mm x 76 mm])
Nombre de la
plantilla
Bandejas
Etiqueta de
equipo
(3/4" x 2.2" [18 mm x 58 mm])
(1/2" x 2.7" [12 mm x 70 mm])
1
Placa (VRT)
2
3
4
5
6
7
Envoltura
de cable
(3/4" x 1.5" [18 mm x 39 mm])
8
9
Utilización de diseños de formato automático
41
Download from Www.Somanuals.com. All Manuals Search And Download.
EDICIÓN DE ETIQUETAS
Atributo
Valor
Detalles
Etiqueta 1 de
nombre
(3/4" x 2.8" [18 mm x 72 mm])
(1/2" x 2.8" [12 mm x 72 mm])
(1/4" x 4.4" [6 mm x 113 mm])
(9/64" x 4.4" [3.5 mm x 113 mm])
(3/4" x 5.5" [18 mm x 140 mm])
(3/8" x 1.6" [9 mm x 42 mm])
Etiqueta 2 de
nombre
Dorso caja CD 1
Dorso caja CD 2
Dorso de VHS
Dorso MiniDV
Nombre de la
plantilla
Utilización de diseños de formato automático
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Utilización de diseños de bloque
Oprima la tecla
Auto-Format (Formato automático) y seguidamente
seleccione “Diseños de bloque” oprimiendo la tecla
para que aparezca la pantalla de
1
2
3
o la tecla
.
Oprima la tecla
Ancho de cinta y seguidamente seleccione un ancho de
cinta oprimiendo la tecla o la tecla
o la tecla
para mostrar la pantalla
.
Oprima la tecla
o
.
Si el ancho de cinta no se modifica, aparecerá el
último diseño de bloque seleccionado. Si se modifica
el ancho de cinta, aparecerá el diseño por defecto
para el nuevo ancho de cinta.
Seleccione un diseño de bloque oprimiendo la tecla
4
5
6
o la tecla
.
Oprima la tecla
o
.
Aparece la pantalla "Estilo".
Seleccione un atributo oprimiendo la tecla
o
y
seguidamente ajuste un valor para ese atributo
1
oprimiendo la tecla
o
.
Oprima la tecla
seleccionado recupere su valor por defecto.
para que el atributo
2
3
4
5
6
7
Oprima la tecla
Aparece la pantalla de introducción de texto para el
diseño de bloque.
o
.
7
8
Puede utilizar el modo "Caps" (Bloqueo de
mayúsculas) para introducir texto.
Introduzca el texto deseado y, a continuación, oprima
la tecla
o la tecla
.
Repita este proceso para cada campo de texto.
El menú "Imprimir" aparece cuando se oprime la tecla
8
9
o la tecla
después de haber introducido texto
en todos los campos de texto.
Utilización de diseños de formato automático
43
Download from Www.Somanuals.com. All Manuals Search And Download.
EDICIÓN DE ETIQUETAS
Seleccione "Imprimir" oprimiendo la tecla
o la tecla
y seguidamente oprima
9
la tecla
o
para imprimir la etiqueta.
• Seleccione "Editar" para cambiar los datos de texto o la configuración de estilo.
• Seleccione "Guardar" para guardar la etiqueta en la memoria de archivos.
• Seleccione "Salir" para salir de la función de formato automático.
• Seleccione "Cambiar diseño" para utilizar un diseño distinto.
• Oprima la tecla
para regresar al paso anterior.
los diseños disponibles.
• Aparecerá el mensaje "¿Borrar todo el texto?" al pulsar la tecla
o la tecla para borrar todo el texto u oprima la tecla para no borrar el texto.
• Para imprimir múltiples copias, numeradas secuencialmente, o una imagen espejo de
la etiqueta, acceda al menú de impresión, mantenga oprimida la tecla y oprima
la tecla para que aparezca el menú "Print Options" (Opciones de impresión).
. Oprima la tecla
• Si el ancho del cartucho de cinta actual no coincide con el ancho establecido para el
diseño seleccionado, aparecerá un mensaje de error cuando intente imprimir la
etiqueta. Oprima la tecla
, o cualquier otra, para borrar el mensaje de error e
introduzca un cartucho de cinta que tenga el ancho correcto.
• Si el número de caracteres introducido supera el límite, aparecerá un mensaje de error
cuando oprima la tecla
o la tecla . Oprima la tecla
, o cualquier otra, para
borrar el mensaje de error y editar el texto para que tenga menos caracteres.
• Cuando se utiliza la función de formato automático, la etiqueta se corta con un
margen en los extremos izquierdo y derecho, independientemente de la configuración
de la opción de corte de la cinta (consulte la página 55).
Utilización de diseños de formato automático
44
Download from Www.Somanuals.com. All Manuals Search And Download.
zDiseños de bloquesz
Atributo
Valor
Detalles
2LíneasA
2LíneasB
3Líneas
Diseño de
bloques
(cinta de 3/4"
[18 mm])
1+2LineasA
1+2LíneasB
1+3Líneas
1+4Líneas
1+5Líneas
2LíneasA
2LíneasB
3Líneas
1
2
3
4
5
6
7
Diseño de
bloques
(cinta de 1/2"
[12 mm])
1+2Lineas
8
9
Utilización de diseños de formato automático
45
Download from Www.Somanuals.com. All Manuals Search And Download.
EDICIÓN DE ETIQUETAS
Atributo
Valor
Detalles
2LíneasA
Diseño de
bloques
(cinta de 3/8"
[9 mm])
2LíneasB
1+2Lineas
Diseño de
bloques
(cinta de 1/4"
1+2Lineas
[6 mm])
Utilización de diseños de formato automático
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Creación de una etiqueta de código de barras
La función de código de barras le permite crear etiquetas con códigos de barras que
se pueden utilizar en cajas registradoras, sistemas de control de existencias u otros
sistemas de lectura de códigos de barras, o incluso, las etiquetas de control de activos
utilizadas en los sistemas de administración de activos.
• La etiquetadora P-touch no está diseñada exclusivamente para crear etiquetas de códigos
de barras. Compruebe siempre que el lector de código de barras puede leer las etiquetas
de códigos de barras.
• Para obtener mejores resultados, imprima las etiquetas de código de barras con tinta negra
en cinta blanca. Es posible que algunos lectores de códigos de barras no puedan leer las
etiquetas de código de barras si se han creado en una cinta de color o con tinta de color.
• Utilice el valor “Grande” para “Ancho” siempre que sea posible. Es posible que algunos
lectores de códigos de barras no puedan leer las etiquetas de código de barras si se han
creado con el valor “Pequeño”.
• El cabezal de impresión se puede recalentar si se imprime continuamente un gran
número de etiquetas con códigos de barras, lo cual podría afectar la calidad de impresión.
Configuración de los parámetros de códigos de barras
Oprima la tecla
para mostrar el menú Setup
1
(Configuración), seleccione "Ajustr códig barrs"
oprimiendo la tecla
oprima la tecla
o la tecla
o la tecla
y seguidamente
.
Aparece la pantalla "Ajustr códig barrs".
Si oprime la tecla
mientras mantiene oprimida la
tecla
también podrá entrar en "Ajustr códig barrs".
Seleccione un atributo oprimiendo la tecla
o
y
2
1
seguidamente ajuste un valor para ese atributo
oprimiendo la tecla
o
.
2
3
4
5
6
7
El atributo "Dígito cntrl" sólo está disponible para los
protocolos CODE39, I-2/5 y CODABAR.
Es posible que los caracteres no aparezcan debajo del código
de barras aun cuando se haya seleccionado la opción
"Activado" para "Bajo#", dependiendo del ancho de cinta
que se esté utilizando, el número de líneas que se ha
introducido o la configuración actual del estilo del caracter.
Oprima la tecla
o la tecla
para aplicar los ajustes.
3
La nueva configuración NO SE APLICA si usted no
oprime la tecla
o
.
8
9
• Oprima la tecla
• Oprima la tecla
para regresar al paso anterior.
para que el atributo seleccionado recupere su valor por defecto.
lista de todos los valores disponibles.
Creación de una etiqueta de código de barras
47
Download from Www.Somanuals.com. All Manuals Search And Download.
EDICIÓN DE ETIQUETAS
zConfiguración de código de barrasz
Atributo
Valor
CODE39, CODE128, EAN8, EAN13, EAN128,
Protocolo
UPC-A, UPC-E, I-2/5 (ITF), CODABAR
Grande
Pequeño
Activado
Ancho
Bajo#
(caracteres impresos
debajo del código de
barras)
Apgdo
Apgdo
Dígito cntrl
(comprobar dígito)
Activado
(sólo disponible para los protocolos CODE39, I-2/5
y CODABAR)
Introducción de datos del código de barras
Oprima la tecla
Aparece la pantalla de Entrda código brrs.
.
1
Se pueden incluir hasta cinco códigos de barras en
cada etiqueta.
Escriba los datos del código de barras.
2
Los caracteres especiales se pueden introducir en el
código de barras cuando se utilizan los protocolos
CODE39, CODABAR, CODE128 o EAN128. Si no va a
utilizar ningún caracter especial, continúe en el paso 5.
Oprima la tecla
Aparecerá una lista de los caracteres disponibles
para el protocolo actual.
.
3
4
5
Seleccione un caracter oprimiendo la tecla
tecla , seguidamente oprima la tecla o la tecla
para insertar el caracter en los datos del código
de barras.
o la
Oprima la tecla
de barras en la etiqueta.
o la tecla para insertar el código
Aparecerán dos marcas de código de barras en el texto.
Creación de una etiqueta de código de barras
48
Download from Www.Somanuals.com. All Manuals Search And Download.
• Oprima la tecla
para regresar al paso anterior.
con todos los valores disponibles.
zLista de caracteres especialesz
CODE39
CODABAR
Código
Caracter especial
Código
Caracter especial
0
1
2
3
4
5
6
0
1
2
3
4
5
(ESPACIO)
CODE128, EAN128
Código Caracter especial Código Caracter especial Código Caracter especial
0
1
(ESPACIO)
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
DC3
DC4
NAK
SYN
ETB
CAN
EM
2
3
4
NUL
5
6
SOH
STX
ETX
EOT
ENQ
ACK
BEL
BS
1
7
SUB
ESC
8
2
3
4
5
6
7
9
10
11
12
13
14
15
16
17
18
19
20
FS
GS
RS
HT
LF
VT
US
FF
DEL
CR
FNC3
FNC2
FNC4
8
9
SO
SI
Creación de una etiqueta de código de barras
49
Download from Www.Somanuals.com. All Manuals Search And Download.
EDICIÓN DE ETIQUETAS
Código Caracter especial Código Caracter especial Código Caracter especial
21
22
23
45
46
47
DLE
DC1
DC2
69
FNC1
Edición y eliminación de códigos de barras
•
Para editar los datos del código de barras, coloque el cursor debajo de las marcas
de código de barras que hay en la pantalla de introducción de datos y,
seguidamente, abra la pantalla Entrda código brrs. Consulte la sección
• Para editar los valores “Ancho” y “Bajo#” de un código de barras ya colocado en
una etiqueta, coloque el cursor debajo de cualquiera de las marcas del código
de barras de la pantalla de introducción de datos y, a continuación, abra la
pantalla Ajustr códig barrs. Consulte la sección “Configuración de los
• Para eliminar un código de barras de una etiqueta, coloque el cursor a la
derecha de las marcas de código de barras de la pantalla de introducción de
datos y oprima la tecla
.
Creación de una etiqueta de código de barras
50
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPRESIÓN DE ETIQUETAS
Vista previa de la etiqueta
Con la función de Vista previa, puede comprobar el diseño de la etiqueta antes de
imprimirla.
Oprima la tecla
.
1
Aparece en la pantalla una imagen de la etiqueta.
La longitud de la etiqueta se muestra en la esquina
inferior derecha de la pantalla.
Oprima la tecla
o
para desplazar la vista previa
hacia la izquierda o la derecha.
Oprima la tecla
o
para cambiar el tamaño de la vista previa.
• Oprima la tecla
para regresar a la pantalla de introducción de texto. (Puede volver
.)
• Para desplazar la vista previa hacia la izquierda o hacia la derecha, mantenga
oprimida la tecla y oprima la tecla
• Para imprimir la etiqueta directamente desde la pantalla de vista previa, oprima la
tecla o abra la pantalla de opciones de impresión y seleccione una de esas
asimismo a la pantalla de introducción de texto oprimiendo
,
o
o
.
opciones. Consulte abajo el apartado "Impresión de etiquetas" para obtener
información más detallada.
• La vista previa de impresión es una imagen generada de la etiqueta y puede diferir
de la etiqueta real cuando se imprime.
Impresión de etiquetas
1
Después de introducir el texto y el formato de la etiqueta, usted ya puede imprimir
la etiqueta. Además de imprimir una sola copia de una etiqueta, su etiquetadora
P-touch tiene varias funciones de impresión que le permiten imprimir múltiples
copias de una etiqueta, etiquetas numeradas secuencialmente y etiquetas
impresas en imagen espejo.
2
3
4
5
6
7
• No tire de la etiqueta que sale por la ranura de salida de la cinta. Si lo hace, la
cinta de tinta saldrá expulsada junto con la propia cinta de etiquetas.
• No bloquee la ranura de salida de la cinta durante el proceso de impresión ni cuando
la cinta está avanzando. Si lo hace, la cinta se atascará.
• Asegúrese de comprobar que queda suficiente cinta cuando vaya a imprimir varias
etiquetas una tras otra. Si queda poca cinta, indique un número menor de copias,
imprima las etiquetas de una en una o sustituya el casete de cinta.
• Si la cinta presenta franjas, esto indica el final del cartucho. Si esto aparece durante
8
9
la impresión, oprima la tecla
para apagar la etiquetadora P-touch. Si continúa
imprimiendo se podría producir algún daño.
Vista previa de la etiqueta
51
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPRESIÓN DE ETIQUETAS
Impresión de una sola copia
Asegúrese de que se ha introducido el cartucho correcto y de que la
etiquetadora está lista para imprimir.
1
Oprima la tecla
.
2
Aparece el mensaje que se muestra a la derecha
mientras se está imprimiendo la etiqueta.
Para detener la impresión, oprima la tecla
y apague la etiquetadora P-touch.
Puede aparecer otra serie de mensajes si se oprime la tecla
. Consulte “Mensajes de
error” en la página 68 y compruebe el significado de cualquier mensaje que aparezca.
Impresión de múltiples copias
Esta función le permite imprimir hasta 9 copias de la misma etiqueta.
Asegúrese de que se ha introducido el cartucho correcto y de que la etiquetadora
está lista para imprimir.
1
Mantenga oprimida la tecla
y oprima la tecla
2
para que aparezca la pantalla de opciones de
impresión y, a continuación, seleccione “Copias” con la
tecla
o
.
Oprima la tecla
o la tecla
para que aparezca la
3
pantalla de Copias y, a continuación, indique el
número de copias que desea imprimir oprimiendo la
tecla
o la tecla , o escriba el número utilizando
las teclas numéricas.
• Mantenga oprimida la tecla
o la tecla
para
cambiar el número de copias con mayor rapidez.
Si oprime la tecla cuando está
•
definiendo el número de copias, se restablece el
valor a 1, es decir, el valor por defecto.
Oprima la tecla
o
.
4
Aparece el mensaje que se muestra a la derecha
mientras se imprimen las etiquetas.
• Oprima la tecla
para regresar al paso anterior.
• A menos que se indique lo contrario, la cinta se corta automáticamente después de
imprimir cada copia. Consulte la sección “Opciones de corte de cinta” en la
página 55 donde se explica cómo cambiar esta configuración.
• Las cifras que se muestran en la pantalla durante la impresión indican el "recuento o
número de copias definidos".
Impresión de etiquetas
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Numeración automática de etiquetas
La función de numeración le permite crear un conjunto de etiquetas numeradas
secuencialmente a partir de un solo formato de etiqueta.
Asegúrese de que se ha introducido el cartucho correcto y de que la etiquetadora
está lista para imprimir.
1
Mantenga oprimida la tecla
oprima la tecla para que aparezca la pantalla de
opciones de impresión y entonces seleccione
“Numeración” oprimiendo la tecla o la tecla
y seguidamente
2
.
Oprima la tecla
Aparece la pantalla de punto de inicio de numeración.
o
.
3
Para aplicar la numeración automática a un
código de barras, seleccione el código de barras
aquí. Cuando lo haya seleccionado, se le pedirá
que introduzca el número de etiquetas que desea
imprimir (paso 6).
Lleve el cursor al primer caracter que se va a
aumentar en la secuencia de numeración y oprima la
4
5
tecla
o la tecla
.
Aparece la pantalla de punto final de numeración.
Lleve el cursor al último caracter que se va a
aumentar en la secuencia de numeración y oprima la
tecla
o la tecla
.
1
Aparece el número de etiquetas que se van a
imprimir.
2
3
4
5
6
7
Seleccione el número de etiquetas que se van a
6
7
imprimir con la tecla
o la tecla , o escriba el
número con las teclas numéricas.
• Mantenga oprimida la tecla o la tecla
cambiar el número de etiquetas con mayor rapidez.
Si oprime la tecla cuando está
para
•
seleccionando el número de copias, se restablece el
valor a 1, es decir, el valor por defecto.
Oprima la tecla
o
.
8
9
Se imprimirán las etiquetas.
A medida que se va imprimiendo cada etiqueta, se
muestra el número de copias impresas.
Impresión de etiquetas
53
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPRESIÓN DE ETIQUETAS
• Oprima la tecla
para regresar al paso anterior.
• A menos que se indique lo contrario, la cinta se corta automáticamente después de imprimir
explica cómo cambiar esta configuración.
• Las cifras que se muestran en la pantalla durante la impresión indican el "recuento/número
de copias".
• La numeración automática también se puede aplicar a los códigos de barras. Cuando un
código de barras contiene una secuencia de numeración automática, ningún otro campo de
la etiqueta puede contener otra secuencia de numeración automática.
• La parte de numeración automática de la etiqueta se incrementa después de imprimir cada
etiqueta.
• En una etiqueta sólo se puede utilizar una secuencia de numeración automática.
• Se ignorará cualquier símbolo u otro caracter no alfanumérico de la secuencia de
numeración automática.
• Las secuencias de numeración automática sólo pueden contener un máximo de cinco caracteres.
• Las letras y los números aumentarán como se muestra a continuación:
0
A
a
Î
Î
Î
Î
1
B
b
...9
...Z
...z
Î
Î
Î
Î
0
A
a
Î
Î
Î
Î
...
...
...
...
A0
A1 ...A9
B0
Los espacios (mostrados como subrayados "_" en el ejemplo siguiente) podrán utilizarse para
ajustar el espacio entre caracteres o para controlar el número de dígitos que se van a imprimir.
_9
_Z
1_9
Î
Î
Î
10
...99
Î
Î
Î
00
AA
0_0
Î
Î
Î
...
...
...
AA ...ZZ
2_0 ...9_9
Impresión en modo espejo
La función de impresión en modo espejo le permite crear etiquetas con el texto
impreso al revés, de forma que se pueda leer correctamente cuando se pega en
un cristal o algún otro tipo de material transparente.
Asegúrese de que se ha introducido el cartucho correcto y de que la
etiquetadora está lista para imprimir.
1
Mantenga oprimida la tecla
y oprima la tecla
2
para que aparezca la pantalla de opciones de
impresión y, a continuación, seleccione “Espejo”
con la tecla
o
.
Oprima la tecla
Aparecerá el mensaje "¿Imprimir espejo?".
o
.
3
Impresión de etiquetas
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Oprima la tecla
Aparece el mensaje que se muestra a la derecha
o la tecla
.
4
mientras se está imprimiendo la etiqueta.
• Oprima la tecla
para regresar al paso anterior.
• El texto debe imprimirse en cinta transparente cuando se utiliza la función de
impresión en modo espejo.
• Las funciones de copia y de numeración automática no se pueden utilizar
conjuntamente con la función de impresión en modo espejo.
Opciones de corte de cinta
Las opciones de corte de cinta le permiten especificar cómo avanza y se corta la cinta
cuando se imprimen las etiquetas. En particular, las opciones “Cadna” y “Sin corte”
reducen en gran medida la cantidad de cinta desperdiciada ya que utilizan unos
márgenes más pequeños y eliminan el corte de las secciones blancas entre las
etiquetas.
Oprima la tecla
(Etiqueta).
para mostrar el menú Label
1
2
3
Seleccione "Op. corte" oprimiendo la tecla
o la
tecla
tecla
y seguidamente ajuste el valor oprimiendo la
o la tecla
1
.
2
3
4
5
6
7
Oprima la tecla
o la tecla
para aplicar los ajustes.
La nueva configuración NO SE APLICA si usted
no oprime la tecla
o
.
• Oprima la tecla
para regresar al paso anterior.
valores disponibles.
8
9
Opciones de corte de cinta
55
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPRESIÓN DE ETIQUETAS
Configuración
zCorte de cintaz
Descripción
Ejemplo
Corta automáticamente la cinta después de
imprimir cada etiqueta. Las etiquetas tienen
un margen de 0.94" (24 mm) en los lados
izquierdo y derecho.
ABC
ABC
Margn grande
0.94"
0.94"
(24 mm)
(24 mm)
• Para imprimir etiquetas de una en una:
Automáticamente se corta un trozo de cinta
en blanco antes de imprimir la etiqueta y, a
continuación, se corta la cinta después de
imprimir la etiqueta.
Cuando se imprimen varias etiquetas una tras
otra: Automáticamente se corta un trozo de
cinta en blanco antes de imprimir la primera
etiqueta y, a continuación, se corta la cinta
después que se imprime cada etiqueta.
• Las etiquetas tienen un margen de 0.16"
(4 mm) en los lados izquierdo y derecho.
0.92" (23 mm)
ABC
ABC
0.16"
0.16"
(4 mm) (4 mm)
•
Mrgn pequñ
• Para imprimir etiquetas de una en una:
Automáticamente se corta un trozo de cinta
en blanco antes de imprimir la etiqueta y, a
continuación, no se corta la cinta después
de imprimir la etiqueta.
Cuando se imprimen varias etiquetas una tras
otra: Automáticamente se corta un trozo de
cinta en blanco antes de imprimir la primera
etiqueta y, a continuación, se corta la cinta
después de imprimir cada etiqueta.
0.92" (23 mm)
ABC ABC
0.16" 0.16"
(4 mm) (4 mm)
•
Cadna
• Las etiquetas tienen un margen de 0.16"
(4 mm) en los lados izquierdo y derecho.
• La cinta no avanza ni se corta después de
imprimir la última etiqueta.
•
Utilice esta opción para imprimir una serie de
etiquetas sin efectuar un corte entre ellas.
ABC ABC
Sin corte
•
Si se oprime la tecla
mantiene oprimida la tecla
avanzar y se corta la última etiqueta impresa.
mientras se
se hace
1.06"
0.31"
(27 mm) (8 mm)
• Si se utilizan cintas de tela o cintas adhesivas fuertes, establezca "Sin corte" (Sin cortar)
• La cinta no se corta después de imprimir la última etiqueta si se selecciona la opción "Cadna"
(En cadena) o "Sin corte" (Sin cortar) . Mantenga pulsada la tecla
y pulse la tecla
, y seleccione "Aliment.&corte" (consulte la sección “Avance de la cinta” en la
página 22) para hacer avanzar y cortar la cinta automáticamente o para cortar la cinta
manualmente si está utilizando cintas de tela termoadhesivas o cintas adhesivas extra fuertes.
• Al utilizar la función de Autoformato, la etiqueta se cortará con un margen en los bordes
izquierdo y derecho, independientemente de la configuración activa de la opción de corte
de cinta, salvo si está definido "Sin corte".
Opciones de corte de cinta
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Ajuste de la longitud de la etiqueta
Puede ajustar la longitud de la etiqueta impresa en niveles de -5 a +5.
Pulse la tecla
seleccione "Ajustar longitud" mediante la tecla
y luego pulse la tecla
para ver el menú de configuración,
1
2
3
o
o
.
Seleccione "Ajustar longitud" mediante la tecla
, y luego indique el valor mediante la tecla
o
o
.
Pulse la tecla
o
para aplicar el ajuste.
• Oprima la tecla
• Oprima la tecla
para regresar al paso anterior.
para utilizar el valor por defecto.
• Aproximadamente el 1% de la longitud total de la etiqueta se ajustará con el nivel 1.
Colocación de etiquetas
Si es necesario, recorte la etiqueta impresa con unas tijeras para obtener la
forma y longitud deseadas, etc.
1
2
1
Quite la lámina protectora que cubre la parte trasera de la etiqueta.
2
3
4
5
6
7
La lámina protectora posterior de algunas cintas
puede venir ya con un corte para que se pueda
desprender la lámina con facilidad.
Coloque la etiqueta y, a continuación, presione con firmeza desde la parte
superior a la inferior con un dedo para pegar la etiqueta.
3
• Puede resultar difícil adherir la etiqueta a superficies húmedas, sucias o disparejas.
Las etiquetas pueden desprenderse fácilmente de esas superficies.
• Asegúrese de leer las instrucciones que vienen con las cintas de tela para
transferencias, cintas adhesivas extra fuertes o de otro material especial, y respete
todas las notas de precaución indicadas en las instrucciones.
8
9
Ajuste de la longitud de la etiqueta
57
Download from Www.Somanuals.com. All Manuals Search And Download.
UTILIZACIÓN DE LA MEMORIA DE ARCHIVOS
La memoria de archivos le permite almacenar hasta 9 de las etiquetas que utiliza con
mayor frecuencia. Cada etiqueta se almacena como un archivo, de esta forma usted
podrá recuperar la etiqueta posteriormente con rapidez y facilidad cuando la necesite.
Después de introducir el texto y formatear la etiqueta,
oprima la tecla
para mostrar la pantalla de
Archivos.
Seleccione "Guardar" oprimiendo la tecla
.
o la tecla
Oprima la tecla
o la tecla
.
Aparece un número de archivo.
También se muestra el texto de la etiqueta si ya se ha
guardado una etiqueta con ese número de archivo.
Almacenamiento de etiquetas en la memoria
58
Apertura de un archivo de etiqueta almacenado
Oprima la tecla
para mostrar el menú Archivo.
1
2
3
Seleccione "Abrir" oprimiendo la tecla
o la tecla
.
Oprima la tecla
Aparece el número de archivo de una etiqueta
almacenada.
o la tecla
.
El texto de la etiqueta también aparece para
identificar la etiqueta.
Seleccione un número de archivo utilizando la tecla
4
o la tecla
y seguidamente pulse la tecla
o la
tecla para abrir el archivo seleccionado.
El archivo se abre y aparece en la pantalla de
introducción de texto.
Oprima la tecla
para regresar al paso anterior.
1
2
3
4
5
6
7
8
9
Apertura de un archivo de etiqueta almacenado
59
Download from Www.Somanuals.com. All Manuals Search And Download.
UTILIZACIÓN DE LA MEMORIA DE ARCHIVOS
Impresión de un archivo de etiqueta almacenado
Oprima la tecla
para mostrar el menú Archivo.
1
2
3
Seleccione "Imprimir" utilizando la tecla
.
o la tecla
Oprima la tecla
Aparece el número de archivo de una etiqueta
almacenada.
o la tecla
.
El texto de la etiqueta también aparece para
identificar la etiqueta.
Seleccione un número de archivo con la tecla
o la
o la
4
tecla
tecla
y seguidamente oprima la tecla
para imprimir la etiqueta seleccionada. La
,
etiqueta se imprime desde la máquina.
• Oprima la tecla
para regresar al paso anterior.
• Aparecerá el mensaje "No hay texto!" cuando intente imprimir un archivo que no contiene
texto ninguno.
Impresión de un archivo de etiqueta almacenado
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Eliminación de un archivo de etiqueta almacenado
Oprima la tecla
para mostrar el menú Archivo.
1
2
3
Seleccione "Eliminar" con la tecla
o la tecla
.
Oprima la tecla
Aparece el número de archivo de una etiqueta
almacenada.
o la tecla
.
El texto de la etiqueta también aparece para
identificar la etiqueta.
Seleccione un número de archivo con la tecla
o la
4
5
tecla
y seguidamente oprima la tecla
o la tecla
.
Aparece el mensaje “Borrar?”.
Oprima la tecla o la tecla
para eliminar el archivo.
El archivo se elimina y vuelve a aparecer la pantalla de introducción de texto.
Oprima la tecla
para cancelar la eliminación del archivo y regresar a la pantalla anterior.
1
2
3
4
5
6
7
8
9
Eliminación de un archivo de etiqueta almacenado
61
Download from Www.Somanuals.com. All Manuals Search And Download.
MANTENIMIENTO DE SU Etiquetadora P-touch
Restablecimiento de la etiquetadora P-touch
Puede restaurar la memoria interna del etiquetador P-touch para borrar todos los
archivos de etiquetas guardados y restablecer la máquina a sus ajustes de fábrica.
Apague la máquina y seguidamente, manteniendo oprimidas las teclas
, oprima para volver a encenderla. Por último, suelte
La etiquetadora P-touch se enciende con la memoria interna ya restablecida.
y
1
y
.
Suelte la tecla antes de soltar las otras teclas.
Cuando se restablece la etiquetadora P-touch se borra todo el texto, la configuración
de formato, la configuración de las opciones y los archivos de etiquetas almacenados.
También se borran los ajustes de idioma y de la unidad.
Mantenimiento
La etiquetadora P-touch se debe limpiar con regularidad para conservar su rendimiento.
Antes de comenzar a limpiar el P-touch, ex
Limpieza del exterior del etiquetador P-touch
Utilice un paño seco y suave para limpiar el polvo y cualquier mancha o suciedad que
haya en la unidad principal.
Utilice un paño ligeramente humedecido pasándolo sobre la suciedad o las manchas
difíciles de limpiar.
Restablecimiento de la etiquetadora P-touch
62
Limpieza del cabezal de impresión
Si los caracteres de la etiqueta se imprimen con Cabezal de impresión
franjas o con calidad deficiente, por lo general
esto indica que el cabezal de impresión está
sucio. Limpie el cabezal de impresin con un
bastoncillo de algodn seco o con una cinta para
limpiar cabezales de impresin (TZ-CL4).
Consulte las instrucciones suministradas con la
cinta de limpieza para cabezales de impresión para
saber cómo debe utilizarla.
ADVERTENCIA
No toque el cabezal de impresión directamente
con las manos. El cabezal de impresión puede
estar caliente.
Limpieza de la cortadora de cinta
Una vez al año aproximadamente, limpie las hojas de la
cuchilla mediante un bastoncillo de algodón humedecido
con alcohol isopropílico.
El uso continuado de la cortadora puede hacer que el
adhesivo de la cinta se acumule en su cuchilla, lo cual
puede desafilarla y provocar que la cinta se atasque en
la cortadora.
PRECAUCIÓN
1
No toque la cuchilla del cortador directamente
con las manos.
2
3
4
5
6
7
8
9
Mantenimiento
63
Download from Www.Somanuals.com. All Manuals Search And Download.
SOLUCIÓN DE PROBLEMAS
Qué hay que hacer cuando...
Problema
Causa posible
Recomendación
La pantalla se
"bloquea", o el
etiquetador P-touch
no responde
Consulte la sección “Restablecimiento de la etiquetadora P-
touch” en la página 62 y restablezca la configuración inicial de
la memoria interna. Si el problema no se soluciona tras
restablecer la etiquetadora P-touch, desconecte el adaptador
de CA y extraiga las baterías durante más de 10 minutos.
correctamente.
La pantalla
¿Está el adaptador de CA
bien conectado?
Compruebe que el
adaptador de CA diseñado
exclusivamente para la
etiquetadora P-touch está
correctamente conectado.
permanece apagada
tras encender el
equipo.
¿Está utilizando el
adaptador de CA adecuado?
Compruebe que la etiqueta
en el adaptador CA indica
que es un adaptador Brother
AD-24. Usar un adaptador
incorrecto puede dañar la
máquina.
¿Las baterías están
correctamente instaladas?
Extraiga las baterías y
vuelva a instalarlas.
La etiqueta no se
imprime cuando se
oprime la tecla
¿Ha introducido texto?
Si no se ha introducido
ningún texto, no se imprimirá
ninguna etiqueta.
.
¿Se ha instalado
Compruebe que el cartucho
de cinta se ha instalado
correctamente y que queda
suficiente cinta.
correctamente el cartucho
de cinta y queda cinta
suficiente?
¿Está torcido el extremo de Si lo está, corte la sección
torcida con unas tijeras y
pase correctamente la cinta
por la ranura de salida de la
cinta.
la cinta?
¿Se ha atascado la cinta?
Si está atascada, retire el
cartucho de cinta, tire
cuidadosamente de la cinta
atascada y corte la cinta con
unas tijeras. Compruebe que
el extremo de la cinta pasa por
la guía de la cinta y vuelva a
instalar el cartucho de cinta.
¿Está abierta la tapa del
compartimiento de la cinta?
De ser así, cierre bien la
tapa del compartimiento de
la cinta.
Qué hay que hacer cuando...
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Problema
Causa posible
Recomendación
Los mensajes en la
pantalla LCD se
muestran en un
¿Se seleccionó el idioma
correctamente?
Consulte la sección “Ajuste
en la página 24 y seleccione
el idioma deseado para los
mensajes en pantalla.
idioma desconocido.
La etiqueta no se
imprime
correctamente.
¿Está el cartucho de cinta
instalado correctamente?
Cuando coloque uncartucho
de cinta, presione con
firmeza hasta que oiga un
chasquido que le indica que
está en su sitio.
¿Está limpio el cabezal de
impresión?
Si no lo está, limpie el cabezal
de impresión con un
bastoncillo de algodón o con
una cinta para limpiar
cabezales de impresión (TZ-
CL4).
¿Qué opción se ha
seleccionado en el menú
"Op. corte", "Cadna" o "Sin
corte"?
Cuando se selecciona
alguna de estas opciones, la
cinta no avanza tras imprimir
la etiqueta. Compruebe cuál
opción está seleccionada en
el menú “Op. corte” o
mantenga oprimida la tecla
y oprima la tecla
para hacer avanzar la cinta y
cortarla.
1
2
3
4
5
6
7
8
9
Qué hay que hacer cuando...
65
Download from Www.Somanuals.com. All Manuals Search And Download.
SOLUCIÓN DE PROBLEMAS
Problema
Causa posible
Recomendación
La cinta de tinta está ¿Está la cinta de tinta suelta Si la cinta de tinta está rota,
separada del rodillo
de tinta.
en el cartucho de cinta o
usted tiró de una etiqueta
que estaba saliendo por la
sustituya el cartucho de
cinta completo. Si no está
rota, deje la cinta sin cortar y
ranura de salida de la cinta? extraiga el cartucho de cinta
y, a continuación, enrolle la
cinta de tinta suelta en el
carrete como se muestra en
la figura.
Carrete
Cinta de tinta
La etiquetadora
¿Queda suficiente cinta en Cuando la cinta muestra
P-touch se detiene
durante la impresión
de una etiqueta.
el cartucho de cinta?
franjas, esto indica que se
ha llegado al final de la cinta.
Sustituya el cartucho de
cinta usado con un nuevo
cartucho de cinta cuando
aparezcan estas franjas.
¿Le queda poca carga a las Reemplace todas las
baterías y el adaptador de baterías o conecte
CA no está conectado o no directamente el adaptador
es el adaptador Brother
AD-24?
de CA (Brother AD-24) a la
etiquetadora P-touch.
Qué hay que hacer cuando...
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Problema
Causa posible
Recomendación
La etiqueta no se
corta
automáticamente.
¿Qué opción se ha
seleccionado en el menú
"Op. corte", "Cadna" o "Sin
corte"?
Cuando se selecciona
alguna de estas opciones, la
cinta no avanza tras imprimir
la etiqueta. Compruebe cuál
opción está seleccionada en
el menú “Op. corte” o
mantenga oprimida la tecla
y oprima la tecla
para hacer avanzar la cinta y
cortarla.
¿Está activada la función de Cuando vaya a trabajar con
Corte manual?
cintas de tela para
transferencias o cintas
adhesivas extra fuertes,
utilice unas tijeras para
cortar la cinta al término de
la impresión.
¿Está abierta la tapa del
compartimiento de la cinta?
De ser así, cierre bien la
tapa del compartimiento de
la cinta.
Los archivos de
¿Se han desconectado las
Todos los archivos
etiquetas guardados baterías y el adaptador de
almacenados en la memoria
interna se pierden si las
baterías y el adaptador de
CA se desconectan durante
más de 2 minutos.
anteriormente están
vacíos ahora.
CA?
1
¿Queda suficiente carga en Todos los datos
2
3
4
5
6
7
las baterías?
almacenados en la memoria
interna se pierden si las
baterías se descargan
totalmente.
¿Ha utilizado la función de
Restablecimiento?
La función de
Restablecimiento borra
todos los datos
almacenados en la memoria
interna, incluidos los
archivos de etiquetas.
8
9
Qué hay que hacer cuando...
67
Download from Www.Somanuals.com. All Manuals Search And Download.
SOLUCIÓN DE PROBLEMAS
Mensajes de error
Si aparece un mensaje de error en pantalla, siga las instrucciones que se indican a
continuación.
Oprima cualquier tecla para que desaparezca el mensaje de error.
Mensaje
Causa/Solución
Las baterías instaladas se están agotando.
Las baterías instaladas están a punto de agotarse.
Reemplace las baterías usadas con baterías nuevas o
conecte el adaptador de CA antes de proseguir.
Se ha conectado un adaptador de CA incompatible. Utilice
sólo el adaptador de CA (Brother AD-24) diseñado
exclusivamente para su etiquetadora P-touch.
El cortador de cinta se cierra si se intenta imprimir o hacer
avanzar la cinta con la tapa cerrada y el casete de la cinta
insertado. Apague y vuelva a encender la etiquetadora P-
touch antes de proseguir.
Si la cinta queda enredada en la cortadora, retire la cinta.
No se ha introducido texto, símbolos ni datos de códigos de
barras cuando se intenta imprimir u obtener una vista previa
de una etiqueta. Introduzca los datos antes de proseguir.
No hay ningún cartucho de cinta instalado cuando se intenta
imprimir u obtener una vista previa de una etiqueta, o se
intenta hacer avanzar la cinta. Instale un cartucho de cinta
antes de proseguir.
El cartucho de cinta se cambia durante la impresión, etc.
Asegúrese de introducir el cartucho de cinta correcto antes
de iniciar la impresión.
Ya hay cinco líneas de texto cuando se oprime la tecla
Limite el número de líneas a cinco.
.
Hay más de tres líneas de texto cuando se oprime la tecla
cuando se usa una cinta de 1/2" (12 mm).
o
Limite el número de líneas a tres o reemplace el cartucho de
cinta con una cinta de mayor ancho.
Mensajes de error
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Mensaje
Causa/Solución
Hay más de dos líneas de texto al oprimir la tecla
o la
tecla
al usar cinta de 3/8" o 1/4" (9 mm o 6 mm). Limite
el número de líneas a dos o reemplace el cartucho de cinta
con una cinta de mayor ancho.
Hay más de una línea de texto al oprimir la tecla
o la
tecla al usar una cinta de 9/64" (3.5 mm). Limite el
número de líneas a una o reemplace el cartucho de cinta con
una cinta de mayor ancho.
Ya hay cinco bloques de texto. Limite el número de bloques
de texto a cinco.
Ya se ha introducido el número máximo de caracteres. Edite
el texto para utilizar menos caracteres.
La longitud de la etiqueta que se va a imprimir basada en el
texto introducido es superior a 39.37" (1 m). Edite el texto
para que la longitud de la etiqueta sea inferior a 39.37" (1 m).
El cartucho de cinta instalado no es de 3/4" (18 mm) cuando
está seleccionada la opción de cinta de 3/4" (18 mm) en la
función de formato automático. Instale un cartucho de cinta
de 3/4" (18 mm).
1
El cartucho de cinta instalado no es de 1/2" (12 mm) cuando
está seleccionada la opción de cinta de 1/2" (12 mm) en la
función de formato automático. Instale un cartucho de cinta
de 1/2" (12 mm).
2
3
4
5
6
7
El cartucho de cinta instalado no es de 3/8" (9 mm) cuando
está seleccionada la opción de cinta de 3/8" (9 mm) en la
función de formato automático. Instale un cartucho de cinta
de 3/8" (9 mm).
8
9
Mensajes de error
69
Download from Www.Somanuals.com. All Manuals Search And Download.
SOLUCIÓN DE PROBLEMAS
El cartucho de cinta instalado no es de 1/4" (6 mm) cuando
está seleccionada la opción de cinta de 1/4" (6 mm) en la
función de formato automático. Instale un cartucho de cinta
de 1/4" (6 mm).
El cartucho de cinta no es de 9/64" (3.5 mm) cuando está
seleccionada la opción de cinta de 9/64" (3.5 mm) en la
función de formato automático. Instale un cartucho de cinta
de 9/64" (3.5 mm).
Ya se ha introducido el número máximo de caracteres para
el diseño seleccionado. Edite el texto para utilizar menos
caracteres o utilice un diseño diferente.
El valor introducido para fijar la longitud de la cinta, la
longitud de la tabulación, las copias múltiples o la función de
numeración no es válido. Introduzca un valor válido para la
longitud de la cinta.
Mensajes de error
70
Mensaje
Causa/Solución
Los datos de código de barras introducidos no tienen los
códigos de inicio y fin necesarios (A, B, C o D requeridos al
principio y al final de los datos de código de barras para el
protocolo CODABAR). Introduzca correctamente los datos
de código de barras.
Ya se han introducido 5 códigos de barras en los datos de
texto cuando se intenta introducir un nuevo código de barras.
Como máximo, en cada etiqueta puede haber 5 códigos de
barras.
1
2
3
4
5
6
7
8
9
Mensajes de error
71
Download from Www.Somanuals.com. All Manuals Search And Download.
APÉNDICE
Especificaciones
Unidad principal
Elemento
Especificación
Dispositivo de entrada
(teclado)
65 teclas, teclado con disposición QWERTY de las teclas
Pantalla
Dispositivo de
visualización
LCD matricial de puntos
Visualización de
caracteres
Pantalla con
iluminación de fondo
16 caracteres x 1 guía y 2 líneas (128 puntos x 48 puntos)
No
Impresión
Método de impresión
Impresora térmica
Cabezal de impresión 128 puntos / 180 ppp
Alto de impresión
0.62" (15.8 mm) máx. (al usar una cinta de 3/4" (18 mm))
Velocidad de impresión 0.39" (10 mm) /segundo aprox.
Cartuchos de cinta estándar TZ (9/64", 3/8", 1/2", 3/4" [3.5, 6, 9,
Cartucho de cinta
Cortadora de cinta
12, 18 mm] de ancho)
Cortadora automática integrada
Cinta de 3/4" (18 mm) : 1 - 5 líneas; cinta de 1/2" (12 mm) :
1 - 3 líneas; cinta de 3/8" (9 mm) : 1 - 2 líneas; cinta de 1/4"
(6 mm) : 1 - 2 líneas; cinta de 9/64" (3.5 mm) : 1 línea
Nº de líneas
Especificaciones
72
Elemento
Memoria
Especificación
Tamaño de la
memoria
Máximo de 1800 caracteres
Almacenamiento de
archivos
Máximo de 9 archivos
Otras características
Frame (Marco)
Total de 16 patrones de marco (incluido patrón sombreado)
Formato automático
Plantillas: 14
Diseños de bloques: 3/4"(18 mm):8, 1/2" (12 mm) : 4,
3/8" (9 mm) : 3, 1/4" (6 mm) : 1
Contraste de pantalla 5 niveles (+2, +1, 0, -1, -2)
Alimentación eléctrica
Alimentación eléctrica Adaptador de CA (AD-24), seis baterías alcalinas de tamaño AA
(LR6).
Desconexión
automática
Solo P-touch: 5 minutos
PC conectado: 60 minutos
Size (Tamaño)
Dimensiones
6.98" (Ancho) x 9.14" (Fondo) x 2.68" (Alto)
[177.2 mm (Ancho) x 232.1 mm (Fondo) x 68.0 mm (Alto)]
Peso
Otros
1.72lb (780 g) (sin el casete de cinta ni las baterías)
Temperatura /
humedad de
funcionamiento
50 ~ 95ºF (10 ~ 35 ºC) / 20 ~ 80% de humedad
(sin condensación)
1
2
3
4
5
6
7
8
9
Especificaciones
73
Download from Www.Somanuals.com. All Manuals Search And Download.
APÉNDICE
Entorno operativo: Windows®
Elemento
Especificación
®
®
OS
Microsoft Windows 2000 Professional / XP/
TM
Windows Vista
®
Memoria
Windows 2000 Pro, XP: Se requieren 128MB o más
TM
Windows Vista : 512 MB o más
Disco duro
Monitor
Se requieren 70MB o más
Tarjeta gráfica SVGA con color de alta densidad, o
superior
Interface
Otros
Puerto USB (especificación USB con protocolo 1.1
o posterior)
Unidad de CD-ROM para la instalación
Especificaciones
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Información de contacto (sólo para EE.UU.)
Centros de servicio
Si necesita un centro de servicio local, llame al teléfono 1-800-284-HELP (4357)
para averiguar cuál es el centro de servicio autorizado que le queda más cerca.
Nota: Llame al centro de servicio antes de desplazarse.
Los centros de servicio no prestan asistencia operativa. Consulte "Asistencia operativa".
Asistencia operativa
Si necesita asistencia técnica y operativa, puede llamar al Servicio de atención al cliente de Brother en:
Voz 1-877-4-PTouch, o 1-877-478-6824
Fax 1-901-379-1210
Correo electrónico custsrv@brother.com
Asistencia por Internet
Para obtener información sobre productos : http://www.brother.com
Para descargar los últimos controladores: http://solutions.brother.com
Para adquirir accesorios y determinados productos Brother: http://www.brothermall.com
Accesorios y suministros
Para pedir accesorios y suministros Brother pagando con Visa, MasterCard, Discover o American Express,
puede llamar al número gratuito 1-888-879-3232 o rellenar el formulario de pedido que encontrará en la
Guía del usuario y enviar ambas caras del formulario por fax al número 1-800-947-1445.
Para adquirir accesorios en Internet: http://www.brothermall.com
Para hacer su pedido por correo o pagar con talón, rellene el formulario de pedido de accesorios y envíelo
con el abono a nombre de:
Brother International Corporation
Attn: Consumer Accessory Division
P.O. Box 341332
Bartlett, TN 38133-1332
Sistema de respuesta por fax
El Servicio de atención al cliente de Brother ha instalado un sencillo sistema de respuesta por fax que le
permitirá obtener respuesta instantánea a preguntas técnicas frecuentes, así como información sobre todos
los productos de Brother. Este sistema está disponible 24 horas al día, 7 días a la semana. Puede usar el
sistema para enviar la información a cualquier número de fax, no sólo al número desde el que llama.
Llame al 1-800-521-2846 y siga las indicaciones de voz para recibir por fax instrucciones sobre cómo
usar el sistema, así como un índice de los temas de respuesta por fax.
Ahorre tiempo - Regístrese en Linea!
No pierda tiempo al teléfono. Despreocúpese por el correo. Visítenos en
www.registermybrother.com
Regístre su producto inmediatamente en nuestra base y listo.
También en su visita, encuentre información útil y participe en sorteos!
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
LW1706001
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Belkin Surge Protector BZ106200IR2M User Manual
BellSouth TV Cables Version 1 User Manual
Braun Range IRT 3020 User Manual
Brother Label Maker PT 2730 User Manual
Campbell Hausfeld Air Compressor HM700099 User Manual
Campbell Hausfeld Saw DG460300CK User Manual
Casio Clock 2566 User Manual
Casio Electronic Keyboard LK94TVES1B User Manual
Cateye Bicycle Accessories TL LD170 R User Manual
Char Broil Fire Pit 6501121 User Manual