|
IT-10 Series
Hardware Manual
(Version 1.00)
CASIO Computer Co., Ltd.
Copyright ©2005. All rights reserved.
March 2005
Download from Www.Somanuals.com. All Manuals Search And Download.
CASIO is a registered trademark of CASIO Computer Co., Ltd. in Japan.
Other product names or company names in this reference manual are either trademarks or registered trademarks of
their respective owners.
No part of this document may be produced or transmitted in any form or by any means, electronic or mechanical,
for any purpose, without the express written permission of CASIO Computer Co., Ltd. in Tokyo Japan.
Information in this document is subject to change without advance notice. CASIO Computer Co., Ltd. makes no
representations or warranties with respect to the contents or use of this manual and specifically disclaims any
express or implied warranties of merchantability or fitness for any particular purpose.
© 2005 CASIO Computer Co., Ltd. All rights reserved.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Editorial Record
Manual
Version
no.
1.00
Date edited
March 2005
Page
Content
Original
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
The IT-10 is a new rugged PDAdesigned and built to be used for vertical applications (business specific
applications) in severe business environment. The terminal is water-splash proof, dust proof and can withstand the
inevitable rough handling that any vertical market device will suffer.
This reference manual will explain you in detail about the specifications of hardware, reliability, environment,
compliance and etc. for the series including models, IT-10M20 and IT-10M30BR, and the dedicated options as
well.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Product Overview
1.1 Features
Hardware and software features at a glance
•
•
Uses Windows Mobile 2003 Second Edition Software for Pocket PC as the operating system.
Withstand a drop from 1 meter, and IP54 level for dust and water-splash resistance (compliant with
IEC60529 standard).
•
•
•
•
•
Large 3.7-inch transflective VGALCD (landscape or portrait mode is possible)
Standard large capacity battery pack for up to 27 hours of continuous use
CompactFlash and SDIO card slots for flexible system expansion in future possible.
Auto-recovery tool to automatically back up and restore user data in case of accidental data corruption
Bluetooth and Wireless LAN (compliant with IEEE802.11b) are integrated as standard for wireless LAN
configuration (IT-10M30BR only).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 Available Models And Options
Table 1.1 Available models
Model
IT-10M20
RAM
64 MB
IEEE802.11b
No
Bluetooth
No
Remark
IT-10M30BR
128 MB
Yes
Yes
Table 1.2 Options
Option
Cradle
Product
Bridge Satellite Cradle
Basic Cradle
Model no.
HA-C61IO
HA-C60IO
Remark
USB/RS-232C/RS-422
USB/RS-232C
Battery
Battery Charger
Battery Pack
Dual Battery Charger
HA-C21BAT
HA-C32DCHG
2,300 mAh, 3.7V
4 hours to charge 2 battery
packs.
AC adaptor
ACAdaptor
ACAdaptor
Screen Protect Sheet
Communication Card
Cover
AD-S42120AE
AD-S15050AE
HA-C90PS5
DC output 12V
DC output 5V, 3A
5 pcs in one pack
Screen Protect Sheet
Communication Card
Cover
HA-C92TCV
Cable
RS-232C cable
USB cable
RS-422 cable
DT-887AXA
DT-380USB
DT-888RSC
Length; 1.5 m, 9-pin male
Length; 2.0 m
Length; 1.0 m
The accessories in the table below are included in each individual carton box of IT-10M20.
Table 1.3 Accessory
Product
Q’ty
1
Remark
Battery Pack
Stylus
HA-C21BAT
1
Attached to the terminal.
ACAdaptor
CD-ROM
User’s Guide
1
1
1
AD-S15050AE (with European and USApower cords)
Pocket PC 2003 Premium License CD
English and Chinese
The IT-10M30BR model is as above except that the AD-S15050AE is supplied separately and is NOT supplied in
the box.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2.1 Options And Interfaces
IrDA Product
(Recommended
option）*
IT-10
Bridge Satellite Cradle
HA-C61IO
IrDA Port
(IrDA 1.3)
USB
RS-232C
PC
RS-422
Power Supply
Terminals
（Built-in Charger）
AC Adaptor
AD-S42120AE
Bridge satellite Cradle
HA-C61IO
SD card
(Recommended
option）＊
SD Card Slot
CF Card Slot
Serial Port
DC Jack
AC Adaptor
AD-S42120AE
CF Card
(Recommended
option）＊
Comm. Card Cover
HA-C92TCV
AC Adaptor
AD-S15050AE
Basic Cradle
HA-C60IO
USB
RS-232C
PC
AC Adaptor
AD-S15050AE
Headphone
Headphone Jack
Access-Point
（Recommended
option）＊
WLAN
（IEEE802.11b）
Bluetooth Product
（Recommended
option）＊
Bluetooth Module
(Ver.1.2 Class2)
Battery Pack
HA-C21BAT
Battery Pack
HA-C21BAT
Dual battery
Charger
HA-C32DCHG
Dual Battery
Charger
HA-C32DCHG
Battery Pack
HA-C21BAT
AC Adaptor
AD-S42120AE
Screen Protect Sheet
HA-C90PS5
Display Block
Fig. 1.2
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3 General Guide
1.3.1 IT-10
External Views
9
11
10
12
13
14
2
1
3
4
5
7
6
6
15
8
19
16
18
22
17
Refer to Table 1.4 for names of each part and
its description.
20
21
Fig. 1.2
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 1.4 Names of parts
No.
1
Part Name
Strap hole
Description
Acommercially available strap can be attached here.
2
Headphone jack
Acommercially available earphones or headphones (with 3.5 mm in
diameter) can be attached here. Remove the rubber cover to use it.
This switch resets the terminal, similar to turning off and on the power
switch. Reset the terminal when some abnormality occurs, such as if the
buttons or tap operations stop working.
This button operates as the Enter key on a computer. Also, it has several
functions when the 5way cursor button is pressed at the same time.
This button moves the cursor and similar items up and down on the screen.
3
4
Reset switch
Action button
5
6
UP/DOWN button
Battery pack cover lock Be sure to keep the lock switches locked. Locking the switches prevents the
switch
battery pack from falling out.
7
8
9
Battery pack cover
IrDAport
Eject button
This is the cover for the battery pack.
This communication port is used data exchange via the IrDAinterface.
This button ejects a CF card (CompactFlash card) installed in the slot.
Either SD card or multimedia card can be inserted in this slot.
CF card (CompactFlash card) can be inserted in this slot.
When theAC adaptor is connected to the terminal or the terminal is mounted
on the Basic Cradle, the lamp turns on in orange indicating the battery pack
is being charged, or in green indicating the battery pack is fully charged.
The lamp blinks in green when CF card or SD card is being accessed. It also
blinks in red for the alarm.
Press this switch to turn on the power or off. Once the power is turned on,
wait for 10 seconds or more to turn off the power.
The LCD screen displays information and stylus is used to enter information
or operate on the screen.
10 SD card slot
11 CF card slot
12 Indicator lamp (left)
13 Indicator lamp (right)
14 Power switch
15 LCD screen
16 Microphone
Direct voice sound here when recording on the Pocket Word or Memo
screen.
17 Program buttons
Pushing one of the program buttons starts the program assigned to that
button. The four default settings are, from the upper left, Menu, Calendar,
Contents, and Inbox.
18 5way cursor button
This button moves the cursor and similar items up, down, left and right on
the screen. Pressing the center of the button straight down performs the same
operation as the Enter key.
19 Speaker
Sounds such as the alarm come out of the speaker. Sound does not come out
when a set of earphones or headphones is connected to the headphone jack.
Peripheral device with RS-232C/USB interface can be connected to the
connector. Remove the rubber cover and store it at the right side silo before
use.
20 Serial connector
21 Power terminals
Terminals for supplying power from the Cradle.
22 Power adaptor port
The dedicatedAC adaptor (AD-S15050AE) can be connected to this port.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3.2 HA-C60IO (Basic Cradle)
Views
2
1
Fig. 1.3
5
4
3
Fig. 1.4
Table 1.5 Names of parts
No.
1
Part Name
Serial connector
Description
This connector mates with the serial connector on the bottom of the terminal.
The power is also supplied to the terminal via this connector.
Align the terminal with these two pegs when mounting it to the Basic Cradle.
Connect the dedicatedAC adaptor (AD-S15050AE) here.
This port is used when connecting to a PC for data transfer between the
terminal and the PC via RS-232C interface.
2
3
4
Alignment pegs
Power adaptor port
RS-232C port
5
USB port
This port is used when connecting to a PC for data transfer between the
terminal and the PC via USB interface.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3.3 HA-C61IO (Bridge Satellite Cradle)
Views
2
4
1
3
5
Fig. 1.5
9
8
7
6
Fig. 1.6
10
Fig. 1.7
Refer to Table 1.6 for names of each part and its description.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 1.6 Names of parts
No.
1
Part Name
Description
IrDAcommunication Align this port with the IrDAcommunication port of the terminal for data
port
transfer via the IrDAinterface.
2
3
Detection switch
This switch detects when the terminal is correctly mounted on the Bridge
Satellite Cradle.
“POWER”
Status lamp
Indicates the power status.
Off
: Power is off.
Green
Red
: Power is on and the terminal is correctly mounted on the Cradle.
: Power is on, but the terminal is not correctly mounted on the
Cradle.
“DATA”
Indicates the communication status.
Off : No communication.
Flashing green : Communication between the terminal and a PC is
established.
Red
: Connection problem in the Cradle.
“LINE”
Indicates the system status.
Off
Green
: The system is not operational.
: The system is operational.
4
5
6
7
Power terminals
Power switch
Power adaptor port
RS-422 ports
These terminals supply power to the terminal mounted on the Cradle.
Turns on the power on the Cradle.
Connect the dedicatedAC adaptor (AD-S42120AE) to this port.
Use these two ports (“C-OUT” and “C-IN”) when connecting up to eight
Bridge Satellite Cradles in series.
8
9
RS-232C port
USB port
Use this port when connecting the terminal and a PC via the RS-232C interface.
Use this port when connecting the terminal and a PC via the USB interface.
Use these switches to configure the settings on the Cradle.
10 DIP switches
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3.4 HA-C32DCHG (Dual Battery Charger)
View
2
1
3
4
Fig. 1.8
Table 1.7 Names of parts
No.
1
Part Name
Charging status
indicator lamp
Description
Indicates the battery charge status.
Green
: Charging is complete.
Red
: Charging continues.
Flashing red
: Problem in the charge operation.
Flashing green : Idle mode waiting for a next charge
Off : No battery pack is mounted.
2
3
4
Power terminals
Power adaptor port
Series connection
terminal
These power terminals provide power to the mounted battery packs.
Connect the dedicatedAC adaptor (AD-S42120AE) to this port.
Maximum 3 units of HA-C32DCHG can be connected in series connecting
this terminal to the terminal on another HA-C32DCHG.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3.5 HA-C21BAT (Battery Pack)
View
Fig. 1.9
15
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Hardware Specifications
2.1 IT-10
Table 2.1
Item
Specification
Remark
CPU, Memory
CPU
Operating system
Intel PXA270 Processor (run at 416 MHz)
Microsoft®Windows® Mobile 2003 Second Edition
Software for Pocket PC
RAM
64 MB (M20) 128 MB (M30BR)
FROM
64 MB (user area: approx. 20 MB)
Display
Display device
No. of dots
Dot pitch
3.7-inch transflective TFT color LCD
480 (w) x 640 (h)
0.117 mm (w) x 0.117 mm (h)
65,536 colors
Scale
Display fonts
Backlight
Scalable fonts
LED
Visible angle
40° when backlight is ON
30° when backlight is OFF
Indicator
Confirmation /Status
2 pcs x LED in red and green colors
Input
Keyboard
Touch Panel
Software keyboard
Program keys (x 4), Action key, UP/DOWN keys,
Cursor key
Switch
Power switch, Reset switch, Battery cover lock
switches (x 2)
IrDA
Standard
Method
IrDAVersion 1.3 compatible
Half-duplex
Synchronization
Baud rate
Comm. range
Start/stop, frame synchronization
9600 bps, 115200 bps, 4 Mbps
0 (contact) to 0.3 m
Wireless LAN (IT-10M30BR)
Standard
IEEE802.11b
(“DS”)
Note 1
Modulation
Frequency range
Baud rate
Comm. range
No. of channels
Output power
Direct sequence spread spectrum
2,400 to 2,483.5 MHz
11 Mbps (maximum)
150 m (outdoor), 50 m (indoor)
11 for FCC, 13 for ETSI
Minimum 12.5 dBm
Maximum 16.0 dBm
Other feature
Bluetooth (IT-10M30BR)
Standard
Roaming between multipleAccess-Points
Bluetooth Version 1.2
Approx. 3m
Note 1
Comm. range
Output power
Maximum 3 dBm (PowerClass 2)
Continue.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial interface
RS-232C
Synchronization
Baud rate
Start/stop, frame synchronization
300, 600, 1200, 2400, 4800, 9600, 19.2K,
38.4K, 57.6K, 115.2K
External output
level
±5V
For communication
with PC only, not
available for external
output.
USB Host
Standard
USB Ver. 1.1 compatible
12 Mbps, 1.5 Mbps
5V±5%, Maximum 500 mA
Baud rate
External output
power
USB Client Standard
Baud rate
USB Ver. 1.1 compatible
12 Mbps
Connector
Pin layout
AXR51268 manufactured by Panasonic
See Fig. 2.1
Connector on IT-10
Signal layout
SD card slot
See Table 2.2.
Supported cards
CF card slot
SD (memory card), MMC, SDIO
Specification
Available power
CompactFlash card Type I/II (3.3V)
3.3V±5%, Maximum 900 mA
DC input
Input voltage
Consumption current
Plug
5V±5%
3A
EIAJ Type II
AD-S15050AE
AC adaptor
Power terminals
Power terminals
Keyboard/Screen side
The power from Cradle
is supplied to the
terminal via these
power terminals.
GND
Power supply terminal
Bottom side
Headphone jack
Stereo headphone jack
Speaker
3.5 mm in diameter
Monaural
Monaural
Microphone
Power
Operating battery
Lithium-ion battery pack x 1 pc
HA-C21BAT battery pack
Memory backup battery NiMH battery (rechargeable) on board
Not replaceable
Battery life
See Table 2.3.
Battery capacity
2,300 mAH
30 minutes or longer
HA-C21BAT battery pack
- The memory backup battery is
fully charged.
- The surrounding temperature is
at room temperature.
Note 2
Backup
period
Memory
backup
battery
only
Memory
backup
One month or longer
- The battery pack
(HA-C21BAT) is fully charged.
battery +
Operating
battery
Note 2
Continue.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery pack charge
time
Approx. 5 hours or less
Conditions;
- The surrounding temperature
is at room temperature.
- The dedicatedAC adaptor or
Cradle is used to charge the
battery pack.
Memory backup battery Approx. 4 hours (when the power is provided Conditions;
charge time
via the dedicatedAC adaptor or the Cradle.)
Approx. 16 hours (when the power on the
terminal is kept on.)
- The battery pack
(HA-C21BAT) is installed in
the terminal.
- The surrounding temperature is
at room temperature.
Dimensions
Weight
Notes:
Approx. 80 (W) x 140 (D) x 25 (H) mm
Approx. 290 g
Note 3
Note 4
1. Concurrent use of Wireless LAN communication and Bluetooth communication is not recommended. The
communication range may vary depending on the radio condition in air and/or the surrounding environment.
2. Each memory backup period will depend on the characteristic of the terminal itself, the surroundings
including temperature, humidity. Thus, the periods described in Table 2.1 are recommended for use for
reference only. They are not guaranteed figures.
3. Any protruding part on the terminal is not measured.
4. The weight includes the lithium-ion battery pack (HA-C21BAT) installed. The strap is excluded.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Pin layout for Serial Interface;
・ ・ ・ 24 25 26
1
2
3 ・ ・ ・
Fig. 2.1
Signal layout;
Table 2.2
Pin
no.
Direction of
signal flow
Signal
Use
Remark
1
2
3
4
5
6
7
CR CD2#
#2 for detecting the Cradle
RS232C
RS232C
RS232C
RS232C
IN
IN
IN
OUT
OUT
IN
-
RS232C CTS
RS232C DCD
RS232C DTR
RS232C RTS
RS232C DSR
GND
RS232C
GND
See note.
8
9
USB Client D-
USB Client D+
For USB Client
For USB Client
IN/OUT
IN/OUT
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
USB Client PLU For USB power
IN
IN/OUT
IN/OUT
OUT
USB Host D-
USB Host D+
VBUS
For USB Host
For USB Host
For USB power
ADP
ADP
ADP
ADP
RS232C RXD
RS232C TXD
GND
Power for charging battery on the terminal
Power for charging battery on the terminal
Power for charging battery on the terminal
Power for charging battery on the terminal
RS232C
-
-
-
See note.
See note.
See note.
See note.
-
IN
OUT
-
RS232C
-
See note.
See note.
GND
-
-
CRSEL0
CRSEL1
ADP
ADP
CR CD1#
For recognition of connected device
For recognition of connected device
Power for charging battery on the terminal
Power for charging battery on the terminal
#1 for detecting Cradle
IN
IN
-
-
IN
See note.
See note.
Notes:
• Since the current at a peak level that flows through the interface reaches as high as 3A, all the “ADP” and
“GND” pins in the table must be used.
• Metal frame of the connector must be connected to “GND” pins.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 2.3 Operating hours by model
IEEE802.11b and
Model
Bluetooth
integrated
Operating hour
Approx. 27 hours
Operating condition and mode
- The surrounding temperature is at room temperature.
- The battery pack (HA-C21BAT) is a brand new and
fully charged.
- The backlight is turned off.
- The IrDAsetting is set to off.
IT-10M20
No
- The CPU speed setting is set to “Auto Mode”.
- The operating periodic ratio of calculation and idle
with the display being turned on is 1:10.
IT-10M30BR
Yes
- The surrounding temperature is at room temperature.
- The battery pack (HA-C21BAT) is a brand new and
fully charged.
- The backlight is turned off.
IT-10M30BR
Notes:
Yes
Approx. 14 hours - The IrDAsetting is set to off.
- The CPU speed setting is set to “Auto Mode”.
- The operating periodic ratio of idle with the display
being turned on, RF and calculation is 10:1:1.
•
The durations of time in “Operating hour” for IT-10M30BR has been measured in the wireless LAN
configuration with CiscoAironet 1100Access-Point. The time duration may become different if other
Access-Point is employed.
•
In the low temperature, the operating hour powered by battery tends to be shorter.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 HA-C60IO/HA-C61IO
Table. 2.4
Item
Interface
Specification
IrDAVer. 1.1 compatible
Half duplex
Remark
Applicable to
HA-C61IO only.
Standard
Comm. method
Synchronization
Comm. speed
Standard
IrDA
Start/stop method
4 Mbps (maximum)
USB Ver. 1.1 compatible
12 Mbps (maximum)
Comm. speed
1. VBus
1
2
2. –Data (D-)
3. +Data (D+)
4. GND
USB
4
Connector
3
USB connector type B
Full duplex
Start/stop method
115.2 Kbps
Comm. method
Synchronization
Comm. speed
SG ER SD RD CD
RS-232C
1
5
4
3
2
8
6
Connector
7
9
CI CS RS
D
D-Sub 9-pin (Female)
Full duplex
Start/stop method
115.2 Kbps
Comm. method
Synchronization
Comm. speed
Applicable to
HA-C61IO only.
IN
RS-422
OUT
6
5
4
3
2
1
6
5
4
3
2
1
Connector
RJ-45 compatible (6 pins)
Applicable to
HA-C61IO only.
No. of LEDs
No. of display colors
3
2 (red, green)
Display
Status LED
DIPswitch
Refer to Chapter 2.4
“Status Indication
With LEDs”.
Refer to Chapter 2.3
“DIP Switch Setting
(For HA-C61IO).
Applicable to
System operation status (“LINE”)
Comm. status (“DATA”)
Power status (“POWER”)
8 switches
Display content
Input
HA-C61IO only.
Detection switch for IT-10
Push switch
Applicable to
HA-C61IO only.
Continue.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Applicable to
DC 12V±5%
HA-C61IO.
Applicable to
Input voltage
DC 5V±5%
HA-C60IO.
DC12VApprox. 3.5A
Applicable to
HA-C61IO.
While supplying power
to the terminal or
transmitting data.
Applicable to
Consumption current
DC5VApprox. 3.0A
HA-C60IO.
While supplying power
to the terminal or
transmitting data.
Applicable to
Input fromAC
adaptor
EIAJ RC-5320AClass 4
(Center pin: plus)
manufactured by Hoshiden
Corp.
EIAJ RC-5320AClass 2
(Center pin: plus)
manufactured by Hoshiden
Corp.
HA-C61IO
Plug
Applicable to
HA-C60IO.
Power
AD-S15050AE
Applicable to
HA-C60IO.
Applicable to
HA-C61IO.
AC adaptor (Dedicated)
Output voltage
AD-S42120AE
DC 5V±10%
2,200 mA(maximum)
Applicable to
HA-C61IO.
Applicable to
HA-C60IO.
With curb function on
current
When HA-C21BAT is
installed in the terminal.
- The illustration of the
power terminals on
the left is viewed at
the front of the cradle.
-Applicable to
Output current
1,500 mA(maximum)
Constant voltage
Charge method
Charge time
Charge/supply
power
Approx. 5.0 hours or less
Power terminals
GND
Power terminal
HA-C61IO.
Weight/Dimensions
Table 2.5
Model no.
Specification
Weight
Dimensions
Weight
Dimensions
Approx. 380 g
Approx. 110 (W) x 103 (D) x 87.5 (H) mm
Approx. 150 g
HA-C61IO
HA-C60IO
Approx. 114 (W) x 107 (D) x 60.0 (H) mm
22
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3 DIP Switch Setting (For HA-C61IO)
The DIP switch is located on the rear side of the Bridge Satellite Cradle (HA-C61IO). Change the ON/OFF
settings according to your required system configuration. The new settings do not go into effect until the power
switch is turned off and then back on again.
ON (Upper side)
OFF (Lower side)
Not used (always OFF)
Not used (always OFF)
Host Computer Interface
Switch Number
6
RS-232C
USB
OFF
ON *
Daisy Chain Termination
Switch Number
5
Intermediate Connection
OFF
Daisy Chain Off/Termination ON *
Connection
Switch Numbers
Host Computer
Daisy Chain
3
4
OFF * OFF *
ON OFF
Inter-Cradle Data Rate (RS-422 Comm. speed)
Switch Numbers
1
2
115, 200 bps
ON *
OFF *
* : Default setting.
Fig. 2.2
Note:
Other DIP switch settings are used for testing and inspection purposes. Because of this, you should never use any
DIP settings other than those described above.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4 Status Indications With LEDs
This chapter is not applicable to the HA-C60IO Basic Cradle.
Various operational statuses on the HA-C61IO can be displayed using the LEDs. The following table describes
LED indication modes and their meanings.
Table 2.5
Item
LED mode
Off
Description
Remark
LED
Power status indicator
(“POWER”)
: Power off.
2-color LED
Green
: Power is ON and the terminal is correctly
mounted on the Cradle.
Red
: Power is ON but the terminal is not correctly
mounted on the Cradle.
Comm. status indicator Off
: No communication being performed.
2-color LED
(“DATA”)
Green (Flashing) : Communication is in progress.
Red (Flashing)
: Problem in the connection between two Bridge
Satellite Cradles.
Line status indicator
(“LINE”)
Off
: The system is not operating.
Green (Flashing) : The system is correctly operating.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5 HA-C32DCHG
Table 2.6
Item
Charge method
Charge method
Specification
Remark
With current limiter
Constant-voltage and constant-current
Approx. 2 hours (with one battery pack mounted) The surrounding temperature is at
Charge period
Power
room temperature.
Approx. 4 hours (with two battery packs
mounted)
Supplied via dedicated AC adaptor
(AD-S42120AE)
DC 12V±5%
Approx. 0.8A
In single configuration
Consumption current
Approx. 2.4A
In configuration of three
HA-C32DCHGs being connected
Operating temperature
Operating humidity
0 to 40℃
30 to 80%
Max. no. of connectivity
3 units of HA-C32DCHG
Weight/Dimensions
Table 2.7
Item
Weight
Specification
Approx. 170 g
Remark
Dimensions
100 (W) x 104 (D) x 42 (H) mm
25
Download from Www.Somanuals.com. All Manuals Search And Download.
2.6 HA-C21BAT
Table 2.8
Item
Rated capacity
Rated voltage
Charge period
Specification
Remark
2,300 mAH
3.7V
Approx. 2.0 hours
When charging one battery
pack at a time with
HA-C32DCHG.
Approx. 4.0 hours
When charging two battery
packs at a time with
HA-C32DCHG
Operating temperature
Operating humidity
Refer to the temperature for HA-C32DCHG
in Table 4.4 when charge.
Refer to the temperature for IT-10 in Table
4.1 when discharge.
Refer to the temperature for HA-C32DCHG
in Table 4.4 when charge.
Refer to the temperature for IT-10 in Table
4.1 when discharge.
Weight
Approx. 60 g
Dimensions
72.8 (W) x 58.0 (D) x 8.1 (H) mm
26
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Product Identification And Reference Numbers
On the back of the terminal and its options (major options only), there is a bar code and numbers printed on label as
shown in Fig. 3.1 below.
This bar code is represented by 15 digits of Code128 and by alphanumeric characters beneath the bar code. The
numbers from 1 to 9 in the figure represent identification and references of the terminal. The numbers from 10 to
14 represent a manufacturing reference which is reserved by the manufacturer. See the figure below for each
meaning.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Manufacturing references
Serial number of the
(reserved by the
terminal in 5 digits
manufacturer)
Check digit
Production month of the year (1 to 9, A,B,C)
Production year (last digit only. Ex. 1 represents the year 2001.)
Model number (two digits in alphanumeric)
94: (Domestic version)
95: (Domestic version)
97: IT-10M20
98: IT-10M20BR
0A: HA-C61IO
0B: (Domestic version)
0C: (Domestic version)
Fig. 3.1
27
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Quality References
This chapter describes about quality references specially concerned with environmental performance, electric
durability, mechanical durability, reliability, compliance and, etc. for the IT-10 series and its dedicated options.
4.1 Environmental Performances
4.1.1 IT-10
Table 4.1
Item
Specification
Condition
Temperature
Humidity
Operation
Non-operation
0 to 40℃
-20 to 60℃
Operation
Non-operation
10 to 85 %RH
10 to 90 %RH
No condensation
Storage in carton box
Temperature
-20 to 60℃
Humidity
10 to 90 %RH
Dust and water-splash proof
IP54 level (compliant with IEC60529)
See “IP (Industrial Protection) code”.
All covers on the terminal
are closed while testing.
IP (Industrial Protection) code
Acording system to indicate the degrees of protection provided by an enclosure against access to hazardous parts,
ingress of solid foreign objects, ingress of water and to give additional protection in connection with such
protection. Elements of the IP54 level and their meanings are as follows.
IP5x
Represents dust proof to level 5. This level of IP code means that the terminal is protected against solid foreign
objects including dust to penetrate the enclosure.
IPx4
Represents water-splash proof to level 4. No detrimental effect is observed even with exposure to water splashed
from any direction.
“x” represents that a characteristic numeral is not required to be specified.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1.2 HA-C60IO
Table 4.2
Item
Specification
Condition
Temperature
Operation
0 to 40℃
Storage
-20 to 60℃
Humidity
Operation
Storage
Storage in carton box
Temperature
10 to 85%RH
10 to 90%RH
No condensation
No condensation
-20 to 60℃
10 to 90%RH
Humidity
Dust and water-splash proof
Not applicable.
4.1.3 HA-C61IO
Table 4.3
Item
Specification
Condition
Temperature
Operation
Storage
0 to 40℃
-10 to 50℃
Humidity
Operation
Storage
Storage in carton box
Temperature
30 to 80%RH
30 to 90%RH
No condensation
No condensation
-10 to 50℃
30 to 90%RH
Humidity
Dust and water-splash proof
Not applicable.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1.4 HA-C32DCHG
Table 4.4
Item
Specification
0 to 40℃
Condition
Temperature
Operation
Non-operation
Storage
When battery pack is not charged.
In carton box
-20 to 60℃
-20 to 60℃
Humidity
Operation
Storage
10 to 85 %RH
10 to 90 %RH
No condensation
No condensation In carton box
4.1.5 HA-C21BAT
Table 4.5
Item
Specification
Condition
Temperature
Operation
Refer to the temperature for
HA-C32DCHG in Table 4.4 when charge.
Refer to the temperature for IT-10 in Table
4.1 when discharge.
Non-operation Refer to the temperature for
HA-C32DCHG in Table 4.4 when charge.
Refer to the temperature for IT-10 in Table
4.1 when discharge.
Storage
Humidity
-10 to 50℃
Operation
Refer to the humidity for HA-C32DCHG
in Table 4.4 when charge.
Refer to the humidity for IT-10 in Table
4.1 when discharge.
Storage
90 %RH or less
No condensation
Dust and water-splash
Not applicable.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 Electrical Durability
4.2.1 IT-10
Table 4.6
Item
5V, 2.7A
Power consumption
5V, 3.0A
Specification
Remark
Applicable to IT-10M20.
Applicable to IT-10M30BR.
Anti-static strength
Malfunction
Destruction
Compatible with EN6100-4-2
±4 KV (contact), ±8 KV (in air)
±12 KV
4.2.2 HA-C60IO/HA-C61IO
Table 4.7
Item
Specification
Remark
Approx. 1.0A/DC12V
- While supplying power to the terminal, or
transmitting data to the terminal.
-Applicable to HA-C61IO.
Consumption
current
Applicable to HA-C60IO.
DC5V±5%
DC12V±5%
Input voltage
Applicable to HA-C61IO.
Anti-static strength
Malfunction
150 pF, 330 ohm
±6 KV
Destruction
±12 KV
Line noise strength 1,000 V
(Malfunction)
Pulse width: 5 KHz
Burst cycle: 300 msec.
No. of pulses: 75 pcs
Burst period: 15 msec.
Power interruption 10 milliseconds or less
4.2.3 HA-C32DCHG
Table 4.8
Item
Specification
Approx. 0.03A
Approx. 0.8A
Remark
When the battery pack is not mounted.
When the battery pack is charged on the
HA-C32DCHG..
Consumption current
Input
12V±5%
Anti-static strength
Malfunction
Destruction
±8 KV
±12 KV
150 pf, 330 ohm
Line noise strength
Malfunction
1,000 V
Pulse width: 5 KHz
Burst cycle: 300 msec.
No. of pulses: 75 pcs
Burst period: 15 msec.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2.4 HA-C21BAT
Table 4.9
Item
Anti-static strength
Malfunction
Specification
Remark
±10 KV
±13 KV
Compliant with IEC6100-4-2 standard
(fully charged)
Destruction
32
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3 Physical Durability
4.3.1 IT-10
Table 4.10
Item
Specification
Condition
Resistance to drop impact (height)
In bare condition
100 cm
Onto concrete, one time on each of the 6 sides and 4 corners.
(no CF card fitted)
In individual carton box 70 cm or less
Onto concrete, one time on each of the 6 sides, 1 corner, 3
edges.
10 to 55 Hz
In master carton box
Resistance to vibration
50 cm or less
1.5 G or less
In X,Y, and Z directions
Reciprocally for 30 minutes
While the power is kept on (with the screen being turned
on).
4.3.2 HA-C60IO/HA-C61IO
Table 4.11
Item
Specification
1.5 G or less
Condition
10 to 55 Hz
In X,Y, and Z directions
Reciprocally for 30 minutes
10 to 55 Hz
Resistance to vibration
(in bare condition)
Resistance to vibration
(in package)
1.5 G or less
In X,Y, and Z directions
Reciprocally for 30 minutes
Resistance to impact
In bare condition
70 cm
One time for 6 faces onto concrete surface
One time for 6 faces, 1 corner and 3 edges
In individual carton box 70 cm or less
In master carton box
50 cm or less
4.3.3 HA-C32DCHG
Table 4.12
Item
Specification
1.5 G or less
Condition
10 to 55 Hz
In X,Y, and Z directions
Reciprocally for 30 minutes
10 to 55 Hz
Resistance to vibration
(in bare condition)
Resistance to vibration
(in package)
1.5 G or less
In X,Y, and Z directions
Reciprocally for 30 minutes
Resistance to impact
In bare condition
70 cm
6 faces, 1 corner and 3 edges
6 faces, 1 corner and 3 edges
In individual carton box 70 cm or less
In master carton box 60 cm or less
33
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3.4 HA-C21BAT
Table 4.13
Item
Specification
Condition
Resistance to vibration
2.0 G or less 10 to 55 Hz
In X,Y, and Z directions
Reciprocally for 30 minutes
Resistance to impact
In bare condition
100 cm
6 faces, 4 edges onto P-tile.
In individual carton box 70 cm or less 6 faces, 3 edges, 1 corner onto concrete floor.
In master carton box 70 cm or less
34
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4 Reliability
4.4.1 IT-10
Table 4.14
Item
Service life
Specification
10,000 hours
Remark/Condition
Backlight
Half-life period 10 hours per day x 200 days per
year x 5 years
Reset switch
Power switch
Battery cover lock switch
Other keys
Serial connector
CF card connector
SD card connector
Mounting/removing the terminal
to/from the Bridge Satellite Cradle
Installing/removing the terminal
to/from the Basic Cradle
1,000 times
100,000 times
3,000 times
250,000 times
5,000 times
5,000 times
5,000 times
10,000 times
Excluding the power switch
10,000 times
Installing/removing the battery cover 3,000 times
Installing/removing the stylus
to/from the silo
10,000 times
Opening/closing the CF card slot
cover
5,000 times
MTBF Electronics parts
40,000 hours
30,000 hours
100,000 hours
500 times
Main PCB
Batteries, switches, LCD module, excluding jacks
LCD
Charging and discharging cycle of
battery pack
Applicable to HA-C21BAT (see note.)
Note:
The number of the cycles is assumed with the conditions below.
•
•
•
•
•
The remained capacity of battery pack at 300th cycle is approximately 60% of the full capacity.
The surrounding temperature is at 23±2℃.
The discharge current is 1.1Aconstant current.
The discharge stops at 2.75V.
The condition of the charge; 1.1Aconstant-current, charging for 5 hours with 4.20V constant-voltage
35
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4.2 HA-C60IO/HA-C61IO
Table 4.15
Item
Specification
50,000 hours
2,400,000 hours Applicable to HA-C60IO.
Remark/Condition
Applicable to HA-C61IO.
MTBF (electronics parts)
Mounting/removing the terminal to/from Basic Cradle
Mounting/removing the terminal to/from Bridge Satellite Cradle 20,000 times
10,000 times
Applicable to HA-C60IO.
Applicable to HA-C61IO.
Power switch
DIP switch
USB
RS-232C
RS-422
5,000 times
10 times
500 times
500 times
100 times
1,500 times
Switch
Applicable to HA-C61IO.
Applicable to HA-C61IO.
No. of installing/removing the
connector
No. of installing/removingAC adaptor to/from the power
adaptor port
4.4.3 HA-C32DCHG
Table 4.16
Item
Specification
50,000 hours
5,000 times
250 times
Remark
MTBF (Electronics parts)
No. of installing/removing the battery pack to/from
No. of connecting/removing the series connection terminal
No. of installing/removingAC adaptor to/from the power
adaptor port
1,500 times
36
Download from Www.Somanuals.com. All Manuals Search And Download.
4.5 Compliance
4.5.1 IT-10
Table 4.17
European Standards
EN60950
EN55022,
EN301.489-17
(EMI,EMS)
EN300.328-2
(Bluetooth,
WLAN)
EN50371
EN50361
EN50360
(SAR)
No
Model
EN61000,
EN55024
(EMI, EMS)
Yes
(Safety)
IT-10M20
IT-10M30BR
No
Yes
Yes
Yes
No
Yes
No
Yes
Table 4.18
Model
USAStandards
UL60950-1
FCC
Part 15B Class B
Yes
FCC Part 15 sub
part C + SAR
No
IT-10M20
IT-10M30BR
Yes
Yes
Yes
Yes
Note:
Consult CASIO Computer Co., Ltd. for other areas.
4.5.2 HA-C60IO/HA-C61IO
Table 4.19
Compliance Standard
Europe
EN55022:1998+A1:2000 Class B
EN55024:1998+A1:2001 Class B
EN60950
USA
EMC
FCC Part 15B Class B
UL60950-1
Safety
4.5.3 AD-S42120AE/AD-S15050AE
Table 4.20
Compliance Standard
Europe
USA
EMC
Safety
EN55022, EN55024, EN61000
EN60950
FCC Part15B
UL1950 3rd edition
4.5.4 HA-C21BAT
Table 4.21
Safety
Compliance Standard
UL1642, UL2054
37
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Cable Specifications
5.1 For Chain Connection And Short Length
Length; 1 meter or less
M a x m im u m
1 m
View from side
View from top
1 2 3 4 5 6
1 2 3 4 5 6
Modular plug
(comppatible with 6/6-
6F R S YK (S abyo
Industrial)
C a b le (see T a b le 5 .1 )
Fig. 5.1
Table 5.1 Specifications of the cable
Cable
Core wire
Conductor
20/0.1A
Insulator
Finish of external shape
Insulator
Semi-hard material P.V.C.
20/0.1A
P.V.C.
Sheath
Finish of external shape
φ4.3±0.1mm
Characteristics
Conductance resistance
Insulation resistance
0.12Ω/m or less
50MΩ or more
Pin layout diagram of cable for chain connection and short distance (pin-to-pin straight connection)
Wiring
Pin no.
Signal
IRS+
IRS-
ISD+
ISD-
Pin no.
Signal
ORS+
ORS-
OSD+
OSD-
IRD+
IRD-
1
2
3
4
5
6
1
2
3
4
5
6
Cradle at lower
position under the
chain connection
Cradle at higher
position under the
chain connection
ORD+
ORD-
Fig. 5.2
38
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2 For Chain Connection And Long Length
Length; 1 meter or longer
Max. 1,000m
View from side
View from top
1 2 3 4 5 6
1 2 3 4 5 6
Modular plug compatible
with 6/6-6 FR SYK50 by
Sanyo Industrial Co.
Cable compatible with SK-UTP
100M3P by Sanyo Industrial Co.
Fig. 5.3
Pin layout diagram of cable for chain connection and long distance (pin-to-pin straight/twist-pair connection)
Wiring
Pin no.
Signal
IRS+
IRS-
ISD+
ISD-
Pin no.
Signal
ORS+
ORS-
OSD+
OSD-
IRD+
IRD-
1
2
3
4
5
6
1
2
3
4
5
6
Cradle at lower
position under the
chain connection
Cradle at higher
position under the
chain connection
XXXXXX
XXXXXX
XXXXXX
ORD+
ORD-
Fig. 5.4
39
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Precautions
6.1 Handling Precautions
Precautions for short-term storage (1 to 2 days)
•
If the IT-10 is to be stored over holidays (including Saturday and Sunday), replace the battery pack with
brand-new one before starting the holiday. This will conserve the built-in memory backup battery and ensure
retention of data on the terminal.
•
If there is a possibility of the above or operator error (e.g., a fully charged battery has not been installed),
practice system operation that maintains a backup to avoid loss of data due to consumption of the batteries.
Precautions for long-term storage (over one week)
•
Prior to long-term storage (over one week), always back-up data in the terminal to other memory storage
device. In addition, remove the lithium-ion battery pack before storage. This can minimize overly
discharging the installed battery pack and minimize consumption of the memory backup battery.
Do not store the removed battery pack at high temperature. Otherwise, it will discharge at an accelerated rate.
Note that the remaining capacity after the battery if it is not used for 10 days at 60°C will be approximately
65%, and that after 20 days at 60°C will be approximately 55%.
•
40
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 Safety
6.2.1 Battery Pack
•
•
•
•
Never disassemble or retrofit the battery pack. The battery pack has safety mechanism and protection means
incorporated to avoid hazards. Should it be damaged, the battery pack could become hot, generate smoke,
explode, or ignite.
Never contact the “+” and “-“ terminals with metal objects such as a wire. Also, do not carry or store the
battery with a metal necklace or hair pin. Otherwise, the battery pack may be short-circuited resulting in an
excessive current and causing the battery to become hot, smoke, explode, or catch fire.
Neither dispose of the battery pack into a fire nor heat it. The insulation may be burnt, the gas exhaust valve
or safety mechanism may be damaged, or the internal electrolyte may ignite, causing the battery pack to
become hot, smoke, explode, or ignite.
Neither leave nor use the battery pack in a place with a high temperature (over 80 °C) or close to a fire or hot
stove. Should the resin separator be damaged due to excessive heat, the battery pack may be short-circuited
causing it to become heated, smoke, explode, or ignite.
•
•
Do not soak the battery pack in fresh water or sea water. If the protection means incorporated in the battery
pack is damaged, the battery pack may become hot, smoke, explode, or ignite.
Do not attempt to charge the battery close to a fire, in direct sunlight, or in a car parked in the sun. Aheated
battery pack will trigger the internal hazard protection means to stop the charging function. Or, the protection
means may be damaged and the battery may be charged with an excessive current or voltage, or have
abnormal chemical reactions induced to cause it to become hot, smoke, explode, or ignite.
Do not stick a pin or nail in the battery pack. Neither hit it with a hammer nor stamp it. If this is done, the
battery pack may be broken or deformed resulting in a short circuit and causing it to become hot, smoke,
explode, or ignite.
•
•
Do not hit or throw the battery pack. If the protection means incorporated in the battery pack is damaged, the
battery pack may be charged with an excessive current or voltage, or have abnormal chemical reactions
induced to cause it to become hot, smoke, explode, or ignite.
•
•
Never use a battery pack that is significantly damaged or deformed. It may become hot, smoke, explosion, or
ignite.
Do not attempt to solder anything directly on the battery pack surface. The insulation may be damaged or the
gas exhaust valve or safety mechanism may be damaged, causing the battery pack to become hot, smoke,
explode, or ignite.
•
•
Do not use the battery pack in other device than the IT-10. The performance or service life of the battery pack
may be reduced or abnormal current may flow to cause it to become hot, smoke, explode, or ignite.
When charging the battery pack use only dedicated cradles or dedicated battery charger and itsAC adaptor
available from CASIO, at a temperature between 0°C and 40°C. If the battery pack is charged with battery
chargers other than those specified by CASIO, it may be over-charged, or charged with an excessive current,
or have abnormal chemical reactions induced, causing it to become hot, smoke, explode, or ignite.
The battery pack has a specific polarity. Do not force it into the IT-10 battery compartment. Check the
polarity. If the battery pack is installed backwards, it can be incorrectly charged and have an abnormal
chemical reaction induced, causing it to become hot, smoke, explode, or ignite.
•
•
If the internal electrolyte of the battery pack leaks and enters the eye, do not rub the eye. Rinse the eye with a
sufficient amount of clean water, such as tap water, then immediately consult with a doctor. The electrolyte
can cause eye damage.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.2 General
•
Be aware of abnormal conditions.
If the IT-10 is continuously used in an abnormal condition, a fire or electric shock may occur. If there is an
abnormality, immediately turn off the Power switch, and be sure to remove the batteries and then contact a
CASIO distributor for repair.
•
•
Supply Current/Voltage
Do not use anAC adaptor withAC voltage not rated on theAC adaptor. Also, avoid drawing power from
Do not damage, break, retrofit, bend, twist, or stretch the power cable. Also, do not place a heavy object on it
or heat it. If this is done, the power cable may be broken and cause a fire or electric shock.
AC adaptor
Always use the dedicatedAC adaptor (AD-S15050AE). If anAC adaptor that is not specified is used, the
battery pack may explode, causing a fire or personal injury.
•
•
•
•
Do not touch the AC adaptor with wet hands.
This may result in an electric shock. Also, place theAC adaptor in a place where it is not subject to dust and
water. Dust and dirt may cause fire and smoke, and water may cause an electric shock.
About the electrolyte
If the internal electrolyte of the battery leaks and enters the eye, rinse it with a sufficient amount of water, then
consult with a doctor
About the battery pack
1. Do not place the battery pack in a microwave oven or high-pressure container. If this is done, the
battery pack will be quickly heated or the contact seal may be broken causing it to become hot, smoke,
explode, or ignite.
2. If you are aware of an abnormal condition such as a smell, excessive heat, discoloration, deformation,
etc., during use, charging and storage of the battery pack, immediately remove it from the IT-10 and do
not use it anymore. If it continuously used without proper treatment, the battery pack may become hot,
smoke, explode, or ignite.
3. If charging cannot be completed even after the specified charging period, stop the charge operation.
Otherwise, the battery pack may become hot, smoke, explode, or ignite.
4. If the battery pack leaks or generates an abnormal smell, immediately remove it away from the fire.
Otherwise, the electrolyte that has leaked may ignite causing smoke, an explosion, or fire.
5. Do not disassemble the battery pack. Neither disassemble nor retrofit this terminal. Personal burns or
injury may occur.
•
About the power cable andAC adaptor
1. Do not bring the power cable close to heating equipment such as stove. The cable coating may burn or
melt, resulting in fire or electric shock.
2. Do not bring the power cable close to a container filled with liquid. If the cable becomes wet or should
the container be tipped over, a fire or electric shock may result.
3. Do not unplug theAC adaptor by pulling the power cable by hand. The cable may be damaged causing
a fire or electric shock. Always hold the plug of the cable.
4. When cradle or battery charger is not used for an extended period of time, e.g. during absences, unplug
the AC adaptor from the wall outlet.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
•
About the battery
1. Do not attempt to disassemble or solder the battery. Also, do not heat or throw the battery into a fire.
2. When the button-type battery (memory backup battery) used in this terminal is removed, exercise care
so as not to accidentally swallow it. Remain aware of the danger to infants. Store the button-type battery
in an infant-safe location. Should the battery be swallowed, immediately consult a doctor.
3. If the battery is improperly used, the electrolyte may leak and soil other objects, resulting in fire and
personal injury. Be sure to observe the following precautions:
4. Make sure of the polarity (+, or -) of the battery when installing it.
5. Do not leave this terminal unused for an extended period of time with the battery installed.
About the battery pack
Do not use the battery pack in a place where it will be exposed to static electricity. The battery pack may
become hot, explode, or ignite.
•
•
•
Avoid exposing it to water and foreign matter
Should foreign matter (metal chips, water, liquid chemicals) enter inside the product, immediately turn off the
IT-10, remove the battery pack, and then contact your CASIO distributor.
Memory protection
1. Contents of the IT-10 should always be backed up in personal computer to make a separate record from
that on the terminal. The contents of the memory may accidentally be lost due to battery power
consumption, etc. This also occurs when this terminal malfunctions or is repaired.
2. When replacing the battery pack, always refer to the user’s guide accompanied in the carton box.
Improper battery replacement may lead to unexpected loss or alteration of data.
Place of installation
•
1. Do not place the IT-10 in an environment with a significant amount of moisture or dust. Otherwise, a
fire or electric shock may occur.
2. Do not use the IT-10 in the vicinity of a cooking table, humidifier, etc., where it will be subjected to oily
smoke or vapor. Otherwise, a fire or electric shock may occur.
3. Do not place the IT-10 in an unstable situation, such as on a wobbling platform or shelf. It may fall and
cause personal injury.
4. Do not throw the IT-10 into a fire. This may cause a fire or personal injury due to explosion of the
terminal.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
|