ES
USER’S GUIDE
Please keep all information for future reference.
Safety Precautions
Before trying to use the Digital Piano, be sure to read
the separate “Safety Precautions”.
GUÍA DEL USUARIO
Guarde toda la información para futuras consultas.
Precauciones de seguridad
Antes de intentar usar el piano digital, asegúrese de
leer las “Precauciones de seguridad” separadas.
CDP120-ES-1A
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
Please note the following important information before using this product.
• Before using the AD-A12150LW Adaptor to power the product, be sure to check the AC Adaptor for any damage first. Carefully
check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is
seriously damaged.
• The product is not intended for children under 3 years.
• Use only CASIO AD-A12150LW adaptor.
• The AC adaptor is not a toy.
• Be sure to disconnect the AC adaptor before cleaning the product.
This mark applies in EU countries only.
Manufacturer:
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
● Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal
use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.
● IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE
USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
● The contents of this manual are subject to change without notice.
● The actual appearance of the product may be different from that shown in the illustrations in this User’s Guide.
● Company and product names used in this manual may be registered trademarks of others.
E-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Guide............................. E-3
Getting Ready to Play ................ E-4
Preparing the Music Stand.................................E-4
Connecting a Pedal Unit.....................................E-4
Power Supply .....................................................E-4
Playing the Digital Piano............ E-5
Turning on Power and Playing ...........................E-5
Using Headphones.............................................E-5
Using a Damper Pedal .......................................E-6
Changing Keyboard Response to
Touch Pressure (Touch Response)....................E-6
Select from a variety of
musical instrument sounds.................................E-7
Playing Tone Demo Songs.................................E-7
Layering Two Tones...........................................E-7
Using Reverb......................................................E-7
Using Chorus......................................................E-8
Changing the Pitch (Transpose, Tuning)............E-8
Connecting External Devices.... E-9
Connecting a Computer .....................................E-9
MIDI Settings....................................................E-10
Outputting Keyboard Notes to
Audio Equipment ..............................................E-10
Reference .................................. E-11
Troubleshooting................................................E-11
Specifications ...................................................E-12
Operating Precautions......................................E-13
MIDI Implementation Chart
Included Accessories
Separately Available Accessories
• You can get information about accessories that
are separately for this product from the CASIO
catalog available from your retailer, and from the
CASIO website at the following URL.
● Music Stand
● Pedal
● Leaflets
• Safety Precautions
• Other (Warranty, etc.)
Items included as accessories are subject to change without notice.
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
• In this manual, the term “Digital Piano” refers to the CDP-120.
• In this manual, buttons and other controllers are identified using the numbers shown below.
1
2 3 4 5 6 7 8
9
9
■ Back
bk
bl
bm
8STRINGS button ☞E-7
bn
1VOLUME knob ☞E-5
2POWER button ☞E-5
9Speakers
3DEMO, FUNCTION button ☞E-6, 7
4GRAND PIANO 1 button ☞E-7
5GRAND PIANO 2 button ☞E-7
6ELEC PIANO button ☞E-7
7HARPSICHORD button ☞E-7
bkUSB port ☞E-9
blDAMPER PEDAL jack ☞E-4
bmDC 12V terminal ☞E-4
bnPHONES/OUTPUT jack ☞E-5
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready to Play
Preparing the Music Stand
Power Supply
Your Digital Piano runs on standard household power. Be
sure to turn off power whenever you are not using the Digital
Piano.
Music stand
Using the AC Adaptor
Use only the AC adaptor (JEITA Standard, with unified
polarity plug) that comes with this Digital Piano. Use of a
different type of AC adaptor can cause malfunction of the
Digital Piano.
Specified AC Adaptor: AD-A12150LW
Connecting a Pedal Unit
• Use the supplied power cord to connect the AC adaptor as
shown in the illustration below.
Household power outlet
AC adaptor
DAMPER PEDAL jack
DC 12V terminal
Power cord
Note the following important precautions to avoid
damage to the power cord.
During Use
• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or connector.
During Movement
• Before moving the Digital Piano, be sure to unplug the AC
adaptor from the power outlet.
During Storage
• Loop and bundle the power cord, but never wind it around
the AC adaptor.
• Never connect the AC adaptor (JEITA Standard, with
unified polarity plug) that comes with this Digital Piano
to any other device besides this Digital Piano. Doing so
creates the risk of malfunction.
• Make sure the Digital Piano is turned off before
plugging in or unplugging the AC adaptor.
• The AC adaptor will become warm to the touch after
very long use. This is normal and does not indicate
malfunction.
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Digital Piano
1
2
3 4 5 6 7 8
Turning on Power and Playing
Using Headphones
Using headphones cuts off output from the built-in speakers,
which means you can practice playing even late at night
without disturbing others.
• Be sure to turn down the volume level before connecting
headphones.
1.
Press 2.
This turns on power.
• To turn off the Digital Piano, press 2 again.
2.
Try playing something on the keyboard. Use 1
to adjust volume.
PHONES/OUTPUT jack
• Turning off the Digital Piano causes most current
settings to be cleared. The Digital Piano will revert to
initial settings the next time you turn it on.
Once you turn it on it remains on until you turn it off
again.
• Headphones do not come with the Digital Piano.
• Use commercially available headphones. See page E-2 for
information about options.
• Do not listen to very high volume output over
headphones for long period. Doing so creates the risk
of hearing damage.
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor plugged
in when removing the headphones.
Auto Power Off
If you do not perform any operation for 30 minutes, the Digital
Piano will turn off automatically.
■ Disabling Auto Power Off
You can disable Auto Power Off to ensure that power is not
turned off automatically during a concert, etc.
1.
While holding down 8, turn on power.
Auto Power Off will be disabled.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Digital Piano
Changing Touch Response Sensitivity
Using a Damper Pedal
Use the procedure below to control how much the volume of
played notes change in accordance with playing speed.
Select the setting that best matches your playing style.
Connecting a pedal to the DAMPER PEDAL jack makes it
possible to use the pedal as a damper pedal (page E-4).
Pressing the damper pedal while playing will cause the notes
you play to reverberate for a very long time.
1.
While holding down 3, press one of the keys
in the TOUCH RESPONSE area of the keyboard
Changing Keyboard Response to
Touch Pressure
to specify the Touch Response sensitivity.
(Touch Response)
Touch Response alters tone volume in accordance with
keyboard pressure (speed). This provides you some of the
same expressivity you get on an acoustic piano.
Pressing fast produces
louder notes.
Pressing slowly produces
softer notes.
Off (OFF)
Touch Response is turned off. Sound
volume is fixed, regardless of key press
speed.
Type1 (1)
Normal Touch Response
Type2 (2)
Type3 (3)
More sensitive Touch Response than Type 1
Less sensitive Touch Response than Type 1
Do not try to use too much
pressure.
• The initial default Touch Sensitivity setting is Type1.
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Digital Piano
Select from a variety of musical
instrument sounds
Your Digital Piano lets you select from among five different
types of tones. Even the same song sound takes on a
different feel by changing the instrument type.
Layering Two Tones
You can use the following procedure to layer two different
tones (such as piano and strings) so they sound
simultaneously when you press a keyboard key.
1.
Simultaneously press two buttons from 4
through 8 that correspond to the two tones
To select an instrument for playing
you want to layer.
1.
Press a button from 4 through 8 that
corresponds to the tone you want to select.
• The initial default tone setting is GRAND PIANO 1.
2. Play something on the keyboard.
Both tones sound at the same time.
3. To unlayer the tones and return the keyboard to
2. Try playing something on the keyboard.
a single tone, press any one of the buttons from
The tone of the instrument you selected will sound.
4 through 8.
Using Reverb
Reverb adds reverberation to notes. You can change the
duration of the reverb.
1.
While holding down 3, press a key within the
REVERB area of the keyboard to adjust the
reverb length.
Playing Tone Demo Songs
Your Digital Piano comes with five built-in demo tunes, which
demonstrate the characteristics of each of the five tones.
Tone Name
Tune Name
GRAND PIANO 1
GRAND PIANO 2
ELEC PIANO
HARPSICHORD
STRINGS
Prélude [Suite bergamasque]
Étude Op.25-9 “Butterflies”
Original
Gavotte [Französische Suite 5]
Nessun Dorma [Turandot]
1.
Press 3.
This will start playback of the demo songs.
• Pressing a tone button (4 through 8) while demo
song playback is in progress will switch to the demo
song of that tone.
OFF
1 to 10
Turns off reverb.
Press 3 again to stop playback.
The larger the number selected, the longer
the reverb duration.
2.
Playback of the demo songs will continue in an endless
loop until you press 3 to stop it.
• The initial default reverb setting is 6.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Digital Piano
1.
While holding down 3, press the minus (–) or
Using Chorus
plus (+) key within the TRANSPOSE area of the
Chorus is a function that adds depth and breadth to notes. It
makes you sound as if you are playing multiple instruments.
keyboard to change the setting.
• Each press of a key increases or decreases the current
setting by 1.
• To return to the initial default setting, press the minus
(–) and plus (+) keys at the same time.
1.
While holding down 3, press a key within the
CHORUS area of the keyboard to select a
chorus type.
There are five chorus types, plus an off setting.
• The actual effect produced by chorus depends on the
tone you are using.
Fine Tuning (Tuning)
Use the tuning feature when you need to adjust the pitch
slightly to play along with another musical instrument. Also,
some artists perform their music with slightly altered tuning.
You can use the tuning feature to adjust tuning so it exactly
matches a performance on a CD.
• The tuning feature specifies the frequency of the A4 note.
You can set a frequency within the range of 415.5 to
465.9 Hz. The initial default setting is 440.0 Hz.
The initial default chorus setting is OFF.
Changing the Pitch
(Transpose, Tuning)
Changing the Pitch in Semitone Steps
(Transpose)
1.
While holding down 3, press the minus (–) or
plus (+) key within the TUNE area of the
keyboard to change the tuning.
• Each press of a key increases or decreases the current
setting by 0.1 Hz.
The transpose feature lets you change the pitch, in semitone
steps. A simple operation lets you instantly change the pitch
to match that of a singer.
• The transpose setting range is –12 to +12 semitones.
The initial default transpose setting is 0.
• To return to the initial default setting (440.0 Hz), press
the minus (–) and plus (+) keys at the same time.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Devices
3
Connecting the Digital Piano to Your
Computer
Connecting a Computer
You can connect the Digital Piano to a computer and
exchange MIDI data between them. You can send play data
from the Digital Piano to music software running on your
computer, or you can send MIDI data from your computer to
the Digital Piano for playback.
• Make sure you follow the steps of the procedure below
exactly. Connecting incorrectly can make data send
and receive impossible.
Minimum Computer System Requirements
1. Turn off the Digital Piano and then start up your
computer.
The following shows the minimum computer system
requirements for sending and receiving MIDI data. Check to
make sure that your computer complies with these
requirements before connecting the Digital Piano to it.
• Do not start up the music software on your computer
yet!
2. After starting up your computer, use a
commercially available USB cable to connect it
to the Digital Piano.
• Operating System
Windows® XP (SP2 or later) *1
Windows Vista® *2
Windows® 7 *3
B connector
Mac OS® X (10.3.9, 10.4.11, 10.5.8 or later, 10.6.6 or later)
USB cable
(A-B type)
*1: Windows XP Home Edition
Windows XP Professional (32-bit)
*2: Windows Vista (32-bit)
Digital Piano USB port
A connector
*3: Windows 7 (32-bit, 64-bit)
• USB port
Computer USB port
• Never connect to a computer that does not conform to
the above requirements. Doing so can cause problems
with your computer.
3. Turn on the Digital Piano.
• If this is the first time you are connecting the Digital
Piano to your computer, the driver software required to
send and receive data will be installed on your
computer automatically.
4. Start up your computer’s music software.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Devices
5. Configure the music software settings to select
Local Control
one of the following as the MIDI device.
There are times when exchanging data with a computer when
you may not want the Digital Piano to sound notes you play on
its keyboard. The local control setting lets you do just that.
CASIO USB-MIDI: (For Windows 7, Windows Vista,
Mac OS X)
USB Audio Device : (For Windows XP)
1.
While holding down 3, press a key within the
• For information about how to select the MIDI device,
see the user documentation that comes with the music
software you are using.
LOCAL area of the keyboard to change the local
control setting.
• The initial default local control setting is ON. Selecting
OFF for this setting disables output from the Digital
Piano’s speakers.
• Be sure to turn on the Digital Piano first before starting
up your computer’s music software.
• Once you are able to connect successfully, there is no
problem with leaving the USB cable connected when you
turn off your computer and/or Digital Piano.
• This Digital Piano conforms to General MIDI Level 1 (GM).
• For detailed specifications and connections that apply to
MIDI data send and receive by this Digital Piano, see the
latest support information provided by the website at the
following URL.
MIDI Settings
Keyboard Channel
Outputting Keyboard Notes to
Audio Equipment
Connection requires commercially available connecting cords,
supplied by you. The connecting cords should have a stereo
standard plug on one end and a plug that matches the
configuration of the external device on the other end.
A keyboard channel is the channel used for sending Digital
Piano data to a computer. You can select the channel you
want for sending Digital Piano data to a computer.
• The keyboard channel setting range is 01 to 16.
The initial default keyboard channel setting is 01.
1.
While holding down 3, press the minus (–) or
plus (+) key within the KEYBOARD CH area of
the keyboard to change the keyboard channel.
• Each press of a key increases or decreases the current
setting by 1.
• To return to the initial default setting (01), press the
minus (–) and plus (+) keys at the same time.
• Turn off the external device when making connections.
After connecting, turn down the Digital Piano and
external device volume levels whenever turning power
on or off.
• After connecting, turn on the Digital Piano and then the
external device.
• If keyboard notes sound distorted when they are
sounded from external audio equipment, lower the
Digital Piano’s volume setting.
Stereo standard plug
Audio equipment, amplifier,
etc.
Digital Piano PHONES/OUTPUT jack
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Troubleshooting
Symptom
Action
Included Accessories
I can’t find something that should be here.
Power Requirements
Carefully check inside all of the packing materials.
Correctly attach the AC adaptor (page E-4).
Adjust the volume setting (page E-5).
Power will not turned on.
Sound
Nothing happens when I press any keyboard key.
Notes keep sounding, without stopping.
Turn power off and then back on to initialize all Digital Piano settings
(page E-5).
Some notes are cut off while they are playing.
The volume or tone setting I made has changed.
Notes are cut off whenever the number of notes being sounded
exceeds the maximum polyphony value of 48 (24 for some tones).
This does not indicate malfunction.
• Adjust the volume setting (page E-5).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-5).
Output volume does not change even though is
change my keyboard touch.
• Change the Touch Response setting (page E-6).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-5).
In certain keyboard ranges, the volume and tone
quality sound are slightly different from those in other
keyboard ranges.
This is due to system limitations. It does not indicate malfunction.
With some tones, octaves do not change at the far
ends of the keyboard.
This is due to system limitations. It does not indicate malfunction.
The pitch of the notes does not match other
accompanying instruments or sounds strange when
played long with other instruments.
• Check and adjust the transpose (page E-8) and tuning settings
(page E-8).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-5).
The reverb of notes seems to change suddenly.
• Check and adjust the reverb setting (page E-7).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-5).
Computer Connection
I can’t exchange data between the Digital Piano and • Check to make sure that the USB cable is connected to the Digital
a computer.
Piano and computer, and that the device is selected correctly with
your computer’s music software settings (page E-9).
• Turn off the Digital Piano and then exit the music software on your
computer. Next, turn the Digital Piano back on and then restart the
music software on your computer.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Specifications
Model
CDP-120BK
Keyboard
88-key piano keyboard
3 types, Off
Touch Response
Maximum Polyphony
Tones
48 notes (24 for certain tones)
Built-in Tones
Reverb
5; with layer
1 to 10, Off
Chorus
1 to 5, Off
Demo Songs
Other Functions
Transpose
5 songs (tone demo songs)
1 octaves (–12 to +12 semitones)
Tuning
A4 = 415.5 to 465.9Hz (Initial Default: 440.0Hz)
16 multi-timbre received, GM Level 1 standard
MIDI
Inputs/Outputs
USB port
TYPE B
Damper Pedal jack
Phones/Output jack
Standard jack
Stereo standard jack
Output Impedance: 3Ω, Output Voltage: 1.5V (RMS) MAX
Power Jack
Power Supply
AC Adaptor
Auto Power Off
Speakers
12V DC
AD-A12150LW
30 minutes after last key operation, Auto Power Off can be disabled.
(12cm × 6cm oval) × 2
8W + 8W
Output
Power Consumption
Dimensions
Weight
12V = 18W
1
1
1
132.2 × 28.6 × 12.9cm (52 /16 × 11 /4 × 5 /16 inch)
Approximately 11.4kg (25.1 lbs)
• Design and specifications are subject to change without notice.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Operating Precautions
Be sure to read and observe the following operating precautions.
■ Location
Avoid the following locations for this product.
• Areas exposed to direct sunlight and high humidity
• Areas subjected to temperature extremes
• Near a radio, TV, video deck, or tuner
The above devices will not cause malfunction of the product, but interference from the product can cause audio or video
interference of a nearby device.
■ User Maintenance
• Never use benzine, alcohol, thinner, or other chemical agents to clean the product.
• To clean the product or its keyboard, wipe with a soft cloth moistened in a weak solution of water and a mild neutral detergent.
Wring all excess moisture from the cloth before wiping.
■ Included and Optional Accessories
Use only accessories that are specified for use with this product. Use of unauthorized accessories creates the risk of fire, electric
shock, and personal injury.
■ Weld Lines
Lines may be visible on the exterior of the product. These are “weld lines” that result from the plastic molding process. They are not
cracks or scratches.
■ Musical Instrument Etiquette
Always be aware of others around you whenever using this product. Be especially careful when playing late at night to keep the
volume at levels that do not disturb others. Other steps you can take when playing late at night are closing the window and using
headphones.
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
C
MA1104-A Printed in China
CDP120-ES-1A
Download from Www.Somanuals.com. All Manuals Search And Download.
|