Casio Digital Camera EX S20 User Manual

E
Digital Camera  
EX-S20/EX-M20  
User’s Guide  
Thank you for purchasing this CASIO  
Product.  
• Before using it, be sure to read the  
precautions contained in this User’s Guide.  
• Keep the User’s Guide in a safe place for  
future reference.  
• For the most up-to-date information about  
this product, visit the official Exilim Website  
EX-M20  
K858PCM1DMX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
20 GETTING READY  
Contents  
About This Manual ..................................................... 20  
General Guide ............................................................ 21  
2
INTRODUCTION  
Camera  
21  
22  
USB Cradle  
Unpacking .................................................................... 2  
Features ....................................................................... 9  
Precautions .................................................................11  
Monitor Screen Contents ........................................... 23  
REC mode  
PLAY mode  
Changing the Contents of the Monitor Screen  
23  
24  
25  
General Precautions  
Data Error Precautions  
Operating conditions  
Condensation  
Lens  
11  
13  
13  
14  
14  
15  
Indicator Lamps.......................................................... 25  
Attaching the Strap .................................................... 26  
Power Requirements ................................................. 26  
Other  
To load the battery  
To charge the battery  
Power Supply Precautions  
Turning the Camera On and Off  
Auto Power Off (APO)  
26  
28  
32  
35  
36  
16 QUICK START GUIDE  
First, charge the battery! ............................................ 16  
To configure display language and clock settings ..... 17  
To record an image .................................................... 18  
To view a recorded image .......................................... 18  
To delete an image..................................................... 19  
Using the On-screen Menus ...................................... 37  
Configuring Display Language and Clock Settings ... 39  
To configure display language and clock settings  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
INTRODUCTION  
Using the Movie Mode ............................................... 66  
Recording Audio (EX-M20 Only) ............................... 67  
43 BASIC IMAGE RECORDING  
Recording an Image ................................................... 43  
Adding Audio to a Snapshot  
Recording Your Voice  
67  
69  
Aiming the Camera  
Recording an lmage  
About the REC Mode Monitor Screen  
Recording Precautions  
43  
44  
45  
45  
Using the Histogram .................................................. 70  
REC Mode Camera Settings ..................................... 72  
Specifying ISO Sensitivity  
72  
73  
73  
74  
75  
76  
77  
Using Zoom ................................................................ 46  
Using the Flash .......................................................... 47  
Turning the On-screen Grid On and Off  
Turning Image Review On and Off  
Assigning Functions to the [̇] and [̈] Keys  
Assigning Functions to the [̆] and [̄] Keys  
Specifying Power On Default Settings  
Resetting the Camera  
Flash Precautions  
49  
Recording Macro Images ........................................... 50  
Using the Self-timer ................................................... 51  
Specifying Image Size and Quality ............................ 52  
To specify the image size  
To specify image quality  
52  
53  
78 PLAYBACK  
Basic Playback Operation.......................................... 78  
55 OTHER RECORDING FUNCTIONS  
Playing an Audio Snapshot (EX-M20 Only)  
79  
Flipping the Display.................................................... 80  
Zooming the Display Image ....................................... 81  
Resizing an Image ..................................................... 82  
Cropping an Image..................................................... 83  
Playing a Movie .......................................................... 84  
Displaying the Calendar Screen ................................ 86  
Exposure Compensation (EV Shift) ........................... 55  
Adjusting White Balance ............................................ 56  
Adjusting White Balance Manually  
57  
Using the BESTSHOT Mode ..................................... 58  
Creating Your Own BESTSHOT Setup  
60  
Combining Shots of Two People into a Single Image  
(Coupling Shot) .......................................................... 62  
Recording a Subject onto an Existing Background  
Image (Pre-shot) ........................................................ 64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
INTRODUCTION  
Playing a Slide Show ................................................. 87  
PRINT Image Matching II ............................................. 104  
Exif Print ................................................................... 104  
Using USB DIRECT-PRINT ..................................... 105  
Using the FAVORITE Folder .................................... 107  
To specify the slideshow images  
To specify the slideshow time  
To set the slideshow interval  
Using the Photo Stand Feature  
88  
89  
90  
90  
Rotating the Display Image........................................ 91  
Using Image Roulette ................................................ 92  
Adding Audio to a Snapshot (EX-M20 Only) ............. 93  
To copy a file to the FAVORITE folder  
To display a file in the FAVORITE folder  
To delete a file from the FAVORITE folder  
To delete all files from the FAVORITE folder  
107  
108  
109  
110  
To re-record audio  
94  
Playing Back a Voice Recording File  
(EX-M20 Only) ........................................................... 95  
111 OTHER SETTINGS  
Turning the Key Tone On and Off (EX-S20) ............. 111  
Configuring Sound Settings (EX-M20) ..................... 111  
97 DELETING FILES  
To configure sound settings  
To set the volume level  
111  
112  
Deleting a Single File ................................................. 97  
Deleting All Files ........................................................ 98  
Specifying an Image for the Startup Screen ............113  
Configuring Power Down Image Settings.................114  
Specifying the File Name Serial Number  
Generation Method ...................................................116  
99 FILE MANAGEMENT  
Folders ....................................................................... 99  
Using the Alarm .........................................................117  
Memory Folders and Files  
99  
To set an alarm  
117  
118  
Stopping the Alarm  
Protecting Files ........................................................ 100  
To protect a single file  
To protect all files in memory  
100  
101  
Setting the Clock .......................................................118  
To select your Home Time zone  
To set the current time and date  
Changing the Date Format  
118  
119  
120  
DPOF........................................................................ 101  
To configure print settings for a single image  
To configure print settings for all images  
102  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
INTRODUCTION  
Using World Time ..................................................... 120  
Memory Data ............................................................ 142  
To display the World Time screen  
To configure World Time settings  
To configure summer time (DST) settings  
120  
121  
122  
DCF Protocol  
142  
142  
144  
144  
Memory Directory Structure  
Image Files Supported by the Camera  
Built-in Memory and Memory Card Precautions  
Changing the Display Language ............................. 123  
Formatting Built-in Memory...................................... 123  
145 USING THE CAMERA WITH A COMPUTER  
125 USING A MEMORY CARD  
Using the Album Feature ......................................... 145  
Creating an album  
145  
146  
147  
149  
152  
Using a Memory Card .............................................. 126  
Selecting an Album Layout  
Configuring Detailed Album Settings  
Viewing Album Files  
To insert a memory card into the camera  
To remove a memory card from the camera  
Formatting a Memory Card  
126  
126  
127  
128  
Saving an Album  
Memory Card Precautions  
Installing the Software from the CD-ROM ............... 152  
Copying Files ........................................................... 129  
To copy all the files in built-in memory  
About the bundled CD-ROM  
Computer System Requirements  
152  
153  
to a memory card  
To copy a file from a memory card to built-in memory 130  
129  
Installing Software from the CD-ROM in Windows ... 154  
Getting Started  
154  
154  
155  
155  
156  
156  
156  
Selecting a Language  
Viewing the Contents of the Read meFile  
Installing an Application  
Viewing User Documentation (PDF Files)  
User Registration  
Exiting the Menu Application  
131 VIEWING IMAGES ON A COMPUTER  
Using the Camera with a Windows Computer ........ 131  
USB Connection Precautions  
136  
Using the Camera with a Macintosh Computer....... 136  
Installing Software from the CD-ROM on a  
Macintosh ................................................................. 157  
USB Connection Precautions  
140  
Operations You Can Perform from Your Computer... 140  
Installing Software  
Viewing User Documentation (PDF Files)  
157  
158  
Using a Memory Card to Transfer Images  
to a Computer .......................................................... 141  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
INTRODUCTION  
159 PLAYING AN AUDIO FILE (EX-M20 Only)  
173 APPENDIX  
Transferring Audio Files to the Camera ................... 159  
Preparing the Camera for Audio Player Operation ... 160  
Using the Camera as an Audio Player .................... 161  
Menu Reference....................................................... 173  
Indicator Lamp Reference ....................................... 175  
Camera Indicator Lamps  
175  
177  
USB Cradle Indicator Lamps  
General Guide  
161  
163  
Troubleshooting Guide ............................................. 178  
Basic Remote Controller Operations  
Display Messages  
181  
Playing Back Audio Files ......................................... 164  
Specifications ........................................................... 182  
Specifying the Audio Playback Mode  
Playing Back Tracks Randomly  
Selecting a Specific Track for Playback  
Specifying the Track Playback Sequence  
Using BASS BOOST  
164  
164  
165  
166  
168  
Main Specifications  
182  
Deleting MP3 Files from File Memory ..................... 169  
Deleting a Single MP3 File  
Deleting All MP3 Files  
170  
171  
Disabling Remote Controller Button Operations ..... 171  
LCD Remote Control Error Messages ..................... 172  
Audio Playback Precautions .................................... 172  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
INTRODUCTION  
IMPORTANT!  
• The USB driver (mass storage) uses Phoenix  
Technologies Ltd. software.  
The contents of this manual are subject to change  
without notice.  
CASIO COMPUTER CO., LTD. assumes no  
responsibility for any damage or loss resulting from  
the use of this manual.  
CASIO COMPUTER CO., LTD. assumes no  
responsibility for any loss or claims by third parties  
which may arise through the use of the EX-S20/EX-  
M20.  
CASIO COMPUTER CO., LTD. shall not be held  
liable for any damages or losses suffered by you or  
any third party due to the use of Photo Loader and/or  
Photohands.  
Compatibility Software Copyright C 1997  
Phoenix Technologies Ltd., All Rights Reserved.  
• MPEG Layer-3 audio decoding technology licensed  
from Fraunhofer IIS and Thomson Multimedia.  
• Other company, product and service names used  
herein may also be trademarks or service marks of  
others.  
• Photo Loader and Photohands are the property of  
CASIO COMPUTER CO., LTD. Except as stipulated  
above, all copyrights and other related rights to these  
applications revert to CASIO COMPUTER CO., LTD.  
CASIO COMPUTER CO., LTD. assumes no  
responsibility for any damage or loss caused by  
deletion of data as a result of malfunction, repairs, or  
battery replacement. Be sure to back up all important  
data on other media to protect against its loss.  
• The SD logo is a registered trademark.  
• Windows, Internet Explorer, and DirectX are  
registered trademarks of Microsoft Corporation.  
• Macintosh is a registered trademark of Apple  
Computer, Inc.  
I Copyright Restrictions  
Except for the purposes of your own personal enjoyment,  
unauthorized copying of snapshot files, movie files, audio  
files, and music files violates copyright laws and  
international contracts. Distribution to third parties of such  
files over the Internet without permission of the copyright  
holder, whether for profit or for free, violates copyright laws  
and international contracts.  
MultiMediaCard is a trademark of Infineon  
Technologies AG of Germany, and licensed to the  
MultiMediaCard Association (MMCA).  
• Acrobat and Acrobat Reader are trademarks of  
Adobe Systems Incorporated.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
INTRODUCTION  
Easy Image Transfer  
Transfer images to a computer simply by placing the  
camera onto the USB cradle.  
Features  
2.0 million Effective Pixels  
A high-resolution megapixel CCD provides 2.0 million  
effective pixels (2.11 million total pixels) for images that  
print beautifully.  
Photo Stand feature  
A slideshow of images in file memory can be played while  
the camera is on its USB cradle.  
Fixed focus lens for quick operation  
Fixed focus eliminates the need for lens movement, which  
shortens startup time and shooting time.  
BESTSHOT  
Simply select the sample scene that matches the type of  
image you are trying to record and the camera performs  
troublesome setups automatically for beautiful pictures  
every time.  
Macro Function  
Text images come out clear and easy-to read.  
Compact electric lens barrier  
Coupling Shot and Pre-shot  
Protects the lens against damage.  
Coupling Shot lets you combine two subjects into a single  
image, while Pre-shot lets you add a subject to a  
previously recorded background image. This means you  
can create images that include you and your friend, even  
if you are the only two people around. You can use  
Coupling Shot and Pre-shot by selecting the applicable  
sample images in the BESTSHOT mode.  
1.6-inch TFT color LCD monitor screen  
4X digital zoom  
10MB Flash memory  
Images can be recorded without using a memory card.  
Support for SD memory cards and MMC (MultiMedia  
Cards) for memory expansion  
Image Roulette Feature  
Images cycle like a slot machine on the display until one  
of them remains.  
Easy Charging  
Just place the camera onto the USB cradle to charge its  
battery.  
Triple Self-timer mode  
The self-timer can be set up to repeat three times,  
automatically.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
INTRODUCTION  
Real-time histogram  
DCF Data Storage  
An on-screen histogram lets you adjust exposure as you  
view the effect on overall image brightness, which makes  
shooting under difficult lighting conditions easier than  
ever before.  
DCF (Design rule for Camera File system) data storage  
protocol provides image inter-compatibility between the  
digital camera and printers.  
Digital Print Order Format (DPOF)  
World Time  
Images can be printed easily in the sequence you want  
using a DPOF compatible printer. DPOF can also be used  
when specifying images and quantities for printing by  
professional print services.  
A simple operation sets the current time for your current  
location. You can select from among 162 cities in 32 time  
zones.  
Alarm  
PRINT Image Matching II Compatible  
A built-in alarm helps to keep you on time for important  
events, and even can be used in place of an alarm clock.  
You can also have a specific image appear on the  
monitor screen when the alarm time is reached.  
Images include PRINT Image Matching II data (mode  
setting and other camera setup information). A printer that  
supports PRINT Image Matching II reads this data and  
adjusts the printed image accordingly, so your images  
come out just the way you intended when you recorded  
them.  
Album Function  
HTML files are generated automatically to create an  
album of recorded images. Album contents can be viewed  
and printed using a standard Web browser. Images can  
also be incorporated into Web pages quickly and easily.  
USB DIRECT-PRINT support  
Your camera supports USB DIRECT-PRINT, which was  
developed by Seiko Epson Corporation. When connected  
directly to a printer that supports USB DIRECT-PRINT,  
you can select images to print and start the print  
operation directly from the camera.  
Calendar screen  
A simple operation displays a full-month calendar on the  
cameras monitor screen. Each day of the full-month  
calendar shows a thumbnail of the first image recorded  
for that date, which helps to make searching for a  
particular image quicker and easier.  
Bundled with Photo Loader and Photohands  
Your camera comes bundled with Photo Loader, the  
popular application that automatically loads images from  
your camera to your PC. Also included is Photohands, an  
application that makes image retouching quick and easy.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
INTRODUCTION  
* EX-M20 Only  
Precautions  
Snapshot + Audio Mode  
Adds audio to a snapshot.  
General Precautions  
Be sure to observe the following important precautions  
whenever using the EX-S20/EX-M20.  
Movie + Audio Mode  
Voice Recording  
Quick and easy recording of voice input.  
All references in this manual to this cameraand the  
camerarefer to the CASIO EX-S20/EX-M20 Digital  
Camera.  
After Recording  
Adds audio to images after they are recorded.  
Never try to take pictures or use the built-in display while  
operating a motor vehicle or while walking. Doing so  
creates the danger of serious accident.  
Never try to open the case of the camera or attempt your  
own repairs. High-voltage internal components create the  
risk of electric shock when exposed. Always leave  
maintenance and repair work up to a CASIO authorized  
service center.  
Never look at the sun or any other bright light through the  
cameras viewfinder. Doing so can damage your eyesight.  
Keep the small parts and accessories of this camera out  
of the reach of small children. If swallowed accidentally,  
contact your physician immediately.  
Audio Player Capabilities  
Use the camera to play back music data from standard  
MP3 (MPEG-1 Audio Layer-3/MPEG-2 Audio Layer-3)  
files.  
Selectable Sound Settings  
You can configure different sounds to play whenever you  
turn on the camera, press the shutter release button, or  
perform a key operation.  
Never fire the flash in the direction of a person operating  
a motor vehicle. Doing so can interfere with the drivers  
vision and create the danger of accident.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
INTRODUCTION  
Never fire the flash while it is too close to the subjects  
eyes. Intense light from the flash can cause eye damage  
if it is fired too close to the eyes. This is especially true  
with young children. When using the flash, the camera  
should be at least one meter (3.3´) from the eyes of the  
subject.  
Keep the camera away from water and other liquids, and  
never let it get wet. Moisture creates the danger of fire  
and electric shock. Never use the camera outdoors in the  
rain or snow, at the seashore or beach, in the bathroom,  
etc.  
Should foreign matter or water ever get into the camera,  
immediately turn it off. Next, remove the cameras battery  
and/or unplug the AC adaptor power cord from the power  
outlet, and contact your dealer or nearest CASIO  
authorized service center. Using the camera under these  
conditions creates the danger of fire and electric shock.  
Should you ever notice smoke or a strange odor coming  
out of the camera, immediately turn it off. Next, taking  
care you do not burn your fingers, remove the cameras  
battery and/or unplug the AC adaptor power cord from the  
power outlet, and contact your dealer or nearest CASIO  
authorized service center. Using the camera under these  
conditions creates the danger of fire and electric shock.  
After making sure there is no more smoke coming from  
the camera, take it to your nearest CASIO authorized  
service center for repair. Never attempt your own  
maintenance.  
Never use the AC adaptor to power any other device  
besides this camera. Never use any other AC adaptor  
besides the one that comes with this camera.  
Never cover the AC adaptor with a quilt, blanket, or other  
cover while it is in use, and do not use it near a heater.  
At least once a year, unplug the AC adaptor power cord  
from the power outlet and clean the area around the  
prongs of the plug. Dust build up around the prongs can  
create the danger of fire.  
If the cameras case should ever become cracked due to  
dropping it or otherwise subjecting it to rough treatment,  
immediately turn it off. Next, remove the cameras battery  
and/or unplug the AC adaptor power cord from the power  
outlet, and contact your dealer or nearest CASIO  
authorized service center.  
Never use the camera inside of an aircraft or in any other  
areas where its use is prohibited. Doing so can result in  
an accident.  
Physical damage and malfunction of this camera can  
cause the data stored in its memory to be deleted. Be  
sure to always keep backup copies of data by transferring  
them to personal computer memory.  
Never open the battery cover, disconnect the AC adaptor  
from the camera, or unplug the AC adaptor from the wall  
socket while recording images. Doing so will not only  
make storage of the current image impossible, it can also  
corrupt other image data already stored in file memory.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
INTRODUCTION  
Data Error Precautions  
Operating conditions  
Your digital camera is manufactured using precision  
digital components. Any of the following creates the risk  
of corruption of data in file memory.  
This camera is designed for use in temperatures ranging  
from 0°C to 40°C (32°F to 104°F).  
Do not use or keep the camera in the following areas.  
In areas subject to direct sunlight  
Removing the battery or memory card, or setting the  
camera onto the USB cradle while the camera is  
performing a record or memory access operation  
Removing the battery, removing the memory card, or  
placing the camera onto the USB cradle while the  
operation/flash charge lamp is still flashing after you  
turn off the camera  
In areas subject to high humidity or dust  
Near air conditioners, heaters, or other areas subject  
to temperature extremes  
Inside of a closed vehicle, especially one parked in the  
sun  
In areas subject to strong vibration  
Disconnecting the USB cable, removing the camera  
from the USB cradle, or disconnecting the AC adaptor  
from the USB cradle while a data communication  
operation is being performed  
Using low battery  
Other abnormal operations  
Any of the above conditions can cause an error message to  
appear on the monitor screen (page 181). Follow the  
instructions provided by the message to eliminate the  
cause of the error.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
INTRODUCTION  
Condensation  
Lens  
When you bring the camera indoors on a cold day or  
otherwise expose it to a sudden change of temperature,  
there is the possibility that condensation can form on the  
exterior or on interior components. Condensation can  
cause malfunction of the camera, so you should avoid  
exposing it to conditions that might cause condensation.  
To keep condensation from forming, place the camera  
into a plastic bag before moving it into a location that is  
much warmer or colder than your current location. Leave  
it in the plastic bag until the air inside the bag has a  
chance to reach the same temperature as the new  
location. If condensation does form, remove the battery  
from the camera and leave the battery cover open for a  
few hours.  
Never apply too much force when cleaning the surface of  
the lens. Doing so can scratch the lens surface and cause  
malfunction.  
Fingerprints, dust, or any other soiling of the lens can  
interfere with proper image recording. Never touch the  
lens with your fingers. You can remove dust particles  
from the lens surface by using a lens blower to blow them  
off. Next, wipe the surface of the lens with a soft lens  
cloth.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
INTRODUCTION  
Other  
Take care never to sit down with the camera in the pocket  
of your slacks or otherwise subject the camera to severe  
stress. Doing so can crack the LCD monitor screen.  
The camera may become slightly warm during use. This  
does not indicate malfunction.  
If the exterior of the camera needs cleaning, wipe it with a  
soft, dry cloth.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
QUICK START GUIDE  
First, charge the battery!  
1. Load the battery (page 26).  
2. Place the camera onto the USB cradle to charge the  
battery (page 28).  
1
2
3
It takes about two hours to achieve a full charge.  
1
2
M
E
N
U
D
IS  
P
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
QUICK START GUIDE  
To configure display language and clock settings  
IMPORTANT!  
Be sure to configure the following settings  
before using the camera to record images  
(See page 40 for details).  
1. Press the power button to turn on the camera.  
2. Press [̆], [̄], [̇], and [̈] to select the language you  
want.  
3. Press [SET] to register the language setting.  
1
4. Use [̆], [̄], [̇], and [̈] to select the geographical  
area you want, and then press [SET].  
MENU  
DISP  
5. Use [̆] and [̄] to select the city you want, and then  
press [SET].  
6. Use [̆] and [̄] to select the summer time (DST)  
setting you want, and then press [SET].  
2, 3, 4, 5, 6, 7, 8, 9  
7. Use [̆] and [̄] to select the date format setting you  
want, and then press [SET].  
8. Set the date and the time.  
9. Press [SET] to register the clock settings and exit the  
setting screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
QUICK START GUIDE  
To record an image  
To view a recorded image  
(See page 44 for details.)  
(See page 78 for details.)  
4
1
1
M
MENU  
DISP  
E
N
U
3
D
IS  
P
2
3
1. Press the power button to turn on the  
camera.  
1. Press the power button to turn on the  
camera.  
2. Align the mode selector with “ ” (REC).  
2. Align the mode selector with “ ” (PLAY).  
3. Point the camera at the subject, use the  
monitor screen or viewfinder to compose the  
image.  
3. Use [̇] and [̈] to scroll through the images  
on the monitor screen.  
4. Holding the camera still, gently press the  
shutter release button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
QUICK START GUIDE  
To delete an image  
(See page 97 for details.)  
1
M
E
N
U
D
IS  
P
3, 4, 5, 6  
1. Press the power button to turn on the camera.  
2. Align the mode selector with “ ” (PLAY).  
3. Press [̄] ( ).  
4. Use [̇] and [̈] to display the image you want to delete.  
5. Use [̆] and [̄] to select Delete.  
To exit the image delete operation without deleting anything, select  
Cancel.  
6. Press [SET] to delete the image.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
GETTING READY  
This section contains information about things you need to  
know about and do before trying to use the camera.  
I Button Operations  
Button operations are indicated by the button name inside  
of brackets ([ ]).  
About This Manual  
I On-screen Text  
On-screen text is always enclosed by double quotation  
marks (“ ”).  
This section contains information about the conventions  
used in this manual.  
I Terminology  
The following table defines the terminology used in this  
manual.  
I File Memory  
The term file memoryin this manual is a general term that  
refers to the location where your camera is currently storing  
the images you record. File memory can be any one of the  
following three locations.  
This term as used in this  
Means this:  
manual:  
this cameraor the  
camera”  
The CASIO EX-S20/EX-M20  
Digital Camera  
The cameras built-in Flash memory  
An SD memory card loaded in the camera  
A MultiMediaCard loaded in the camera  
file memory”  
The location where the  
camera is currently storing  
images you record (page 44)  
For more information about how the camera stores images,  
see page 99.  
battery”  
The NP-20 Rechargeable  
Lithium Ion Battery  
optional charger unit”  
The optionally available  
CASIO BC-10L Charger Unit  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
GETTING READY  
General Guide  
The following illustrations show the names of each component, button, and switch on the camera.  
All the illustrations in this manual show the EX-M20. See the text that accompanies the illustrations for information about how  
the EX-S20 and EX-M20 differ from each other.  
Camera  
I Front  
I Back  
1
2
7
8
9
3
0
4
A
B
1 Power button  
2 Shutter release button  
3 Flash  
7 Viewfinder  
8 Operation/Flash charge  
lamp  
9 Normal ( ) / Macro (  
selector  
0 Mode selector  
A Strap bar  
B Battery cover  
C [̆][̄][̇][̈]  
D [SET] button  
E [DISP] button  
F [MENU] button  
G Monitor Screen  
M
E
N
U
4 Lens  
)
D
IS  
P
5 Self-timer lamp  
6 Microphone  
(EX-M20 only)  
G
F
E
D
6
C
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
GETTING READY  
I Bottom  
I Front  
H
I
J
1
2
3
1 Camera connector  
2 [PHOTO] button  
3 [USB] button  
4 [USB] lamp  
5 [CHARGE] lamp  
H Speaker (EX-M20 only)  
I Connector  
J Memory card slot  
5
4
I Back  
USB Cradle  
Simply placing your CASIO digital camera onto the USB  
cradle lets you perform the following tasks.  
6 [DC IN 5.3V]  
(AC adaptor connector)  
7 [USB]  
Battery charging (page 28)  
Automatic transfer of images to a computer (page 131)  
Viewing of images using the Photo Stand slideshow  
feature (page 90).  
(USB port)  
6
7
NOTE  
See Using the Camera as an Audio Playeron page  
161 for information about the LCD remote controller  
that comes with the EX-M20.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
GETTING READY  
Monitor Screen Contents  
The monitor screen uses various indicators and icons to keep you informed of the cameras status.  
REC mode  
1 Flash Mode indicator  
4 Self-timer  
8 Image size  
1600 ҂ 1200 pixels  
1600҂ 1072 pixels  
1280 ҂ 960 pixels  
640 ҂ 480 pixels  
Movie Recording: recording  
time (seconds)  
1234 5 6  
7
None Auto  
None 1-Image  
Flash Off  
Self-timer 10 sec  
Self-timer 2 sec  
Triple self-timer  
10  
s
8
9
0
Flash On  
2s  
Red-eye reduction  
x3  
2 Focus Mode indicator  
E
9 Quality  
FINE  
5 REC modes  
None Normal  
Snapshot  
A
B
NORMAL  
ECONOMY  
Macro  
BESTSHOT  
Movie  
3 White balance indicator  
0
Built-in memory selected  
for data storage.  
None Auto  
Snapshot Audio  
(EX-M20 only)  
Memory card selected  
for data storage.  
Sunlight  
Shade  
C
D
Voice Recording  
(EX-M20 only)  
A ISO sensitivity  
B Date and time  
C EV value  
Light Bulb  
Fluorescent  
Manual  
6 Digital zoom indicator  
7 Memory capacity  
(Remaining number of storable  
images)  
D Battery capacity  
E Digital zoom factor  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
GETTING READY  
PLAY mode  
12  
3
4
5
6
1 PLAY mode file type  
5 Quality  
FINE  
Snapshot  
NORMAL  
ECONOMY  
Movie  
Snapshot Audio  
(EX-M20 only)  
6
Built-in memory selected for data  
storage.  
Voice Recording  
(EX-M20 only)  
Memory card selected for data storage.  
7
7 Date and time  
2 Image protection indicator  
3 Folder number/File number  
8 Battery capacity  
8
4 Image size  
1600 ҂ 1200 pixels  
1600 ҂ 1072 pixels  
1280 ҂ 960 pixels  
640 ҂ 480 pixels  
IMPORTANT!  
Some information may not  
display properly if you display an  
image that was recorded using a  
different digital camera model.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
GETTING READY  
Changing the Contents of the Monitor  
Screen  
Each press of the [DISP] button changes the contents of  
the monitor screen as shown below.  
Indicator Lamps  
You can find out the operational status of the camera and  
the USB cradle at a glance by checking the color of the  
indicator lamps, and whether a lamp is lit or flashing. For  
details, see Indicator Lamp Referenceon page 175.  
Indicators  
on  
(page 23)  
Histogram  
on  
(page 70)  
Indicators  
off  
Monitor  
screen off  
Operation/Flash charge lamp  
IMPORTANT!  
You cannot turn off the monitor screen in the  
following cases:  
In the PLAY mode, in the BESTSHOT mode, when  
not recording in the Movie mode  
You cannot use the [DISP] button to change the  
contents of the monitor screen while a movie is being  
recorded, or while standing by for or performing  
audio recording.  
M
E
N
U
D
IS  
P
Self-timer lamp  
[USB] lamp  
In the Voice Recording mode, you can only turn  
indicators on and off.  
[CHARGE] lamp  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
GETTING READY  
Attaching the Strap  
Power Requirements  
Attach the strap to the strap bar as shown in the illustration.  
Your camera is powered by a rechargeable lithium ion  
battery (NP-20).  
To load the battery  
M
E
N
U
1. Pressing the battery cover on the side of the  
camera, slide it in the direction indicated by  
the ̆ mark and then swing it open.  
D
I
S
P
M
E
N
U
D
IS  
P
IMPORTANT!  
Be sure to keep the strap around your wrist when  
using the camera to protect against accidentally  
dropping it.  
The supplied strap is intended for use with this  
camera only. Do not use it for any other purpose.  
Never swing the camera around by the strap.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
GETTING READY  
IMPORTANT!  
2. Align the arrow mark on the battery with the  
arrow mark on the camera as shown in the  
illustration, and slide the battery into the  
battery compartment.  
Use only the special NP-20 rechargeable lithium ion  
battery to power this camera. Use of any other type  
of battery is not supported.  
Arrow marks  
NOTE  
To remove the battery, open the battery cover.  
Taking care that the battery does not suddenly fall  
out of the camera, tilt the camera towards the side.  
When the battery slides out part way, pull it out by  
hand.  
NP-20  
The battery is not charged when you purchase the  
camera. You need to charge the battery before using  
the camera for the first time.  
3. Swing the battery cover closed, and then slide  
it in the direction indicated by the arrow while  
pressing down on it.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
GETTING READY  
4. Turn off the camera.  
To charge the battery  
5. Set the camera onto  
the USB cradle.  
1. Connect the AC power cord to the bundled  
AC adaptor.  
Do not place the  
camera onto the USB  
cradle while it is turned  
on.  
M
E
N
U
2. Plug the other end of the AC power cord into  
a household power outlet.  
D
IS  
P
The [CHARGE] lamp on  
the USB cradle should  
turn red, indicating that  
charging has started.  
When charging is  
complete, the  
[CHARGE] lamp will  
turn green.  
3. Connect the AC adaptor to the [DC IN 5.3V]  
connector of the USB cradle.  
USB Cradle  
[DC IN 5.3V]  
[CHARGE] lamp  
AC Adaptor  
6. After charging is complete, remove the  
camera from the USB cradle.  
While holding the USB cradle in one hand, use your  
other hand to lift the left side from the USB cradle  
first (as if you were rotating it clockwise vertically).  
This ensures that you properly disengage the  
connector on the bottom of the camera from the USB  
cradles connector.  
AC power cord  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
GETTING READY  
IMPORTANT!  
If the [CHARGE] lamp starts flashing red, it means  
that an error occurs while charging. An error can be  
caused by any of the following: a problem with the  
USB cradle, a problem with the camera, or a problem  
with the battery or how it is loaded. Remove the  
camera from the USB cradle and see if it works  
normally.  
You can use the USB cradle to charge the cameras  
battery, to exchange data with a computer over a  
USB connection, or when using the Photo Stand  
feature only.  
It takes about two hours to achieve a full charge.  
Actual charging time depends on current battery  
capacity and charging conditions.  
Use only the USB cradle (CA-23) or the optionally  
available charger unit (BC-10L) to charge the special  
NP-20 rechargeable lithium ion battery. Never use  
any other charging device.  
Use only the bundled AC adaptor. Never use any  
other type of AC adaptor. Do not use optionally  
available AD-C40, AD-C620 and AD-C630 AC  
adaptors with this camera.  
Make sure that the camera connector of the USB  
cradle is securely inserted into the cameras  
connector as far as it will go.  
The [CHARGE] lamp may remain amber colored and  
the charge operation may not start right away if you  
try to charge immediately after using the camera  
(which causes battery to become warm) or when it is  
too hot or too cold where you are performing the  
charge operation. If this happens, simply wait until  
the battery reaches normal temperature. The  
[CHARGE] lamp will turn red and charging will start  
when the battery temperature returns to the  
allowable charging temperature range.  
NOTE  
The bundled AC adaptor is designed for operation  
with any power supply in the range of 100V to 240V  
AC. Note, however, that the shape of the AC power  
cord plug varies according to country or geographic  
area. If you plan to use the AC adaptor in a  
geographic area where the power receptacle shape  
is different from that in your area, replace the AC  
power cord with one of the other ones that comes  
with the camera, or purchase a commercially  
available AC power cord that is compatible with the  
power outlets in that area.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
GETTING READY  
I If the camera works normally  
I Battery Life Guidelines  
The battery life guideline values given below indicate the  
amount of time under the conditions defined below the  
table, until power automatically turns off due to battery  
failure. They do not guarantee that the battery will provide  
the amount of service indicated. Low temperatures and  
continued use reduce battery life.  
1. Continue using the camera until the current  
charge is used up, and then charge the  
battery.  
I If the camera does not work normally  
Operation  
Approximate Battery Life  
720 shots (120 minutes)  
This can mean there is a problem with how the battery is  
loaded.  
Number of Shots, Continuous  
Recording*1 (Recording Time)  
Number of Shots, Normal  
1. Remove the battery from the camera and  
check the battery contacts for dirt. If the  
contacts are dirty, wipe them clean with a dry  
cloth.  
190 shots (95 minutes)  
180 minutes  
Recording*2 (Recording Time)  
Continuous Playback*3  
(Continuous Snapshot Recording)  
Continuous Voice Recording*4  
Continuous Audio Playback*5  
170 minutes  
450 minutes  
2. Check to make sure that the AC adaptors  
power cord is connected securely to the  
power outlet and USB cradle.  
Supported Battery: NP-20 (Rated Capacitance: 680mAh)  
*1 Continuous Recording Conditions  
Temperature: 23°C (73°F)  
Monitor screen: On  
If the same symptoms occur again when you place  
the camera on the USB cradle after taking the above  
steps, contact a CASIO authorized service center.  
Flash: Off  
Image recorded about every 10 seconds  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
GETTING READY  
*2 Normal Recording Conditions  
Temperature: 23°C (73°F)  
I Tip to Make the Battery Last Longer  
If you do not need the flash while recording, select  
(flash off) for the flash mode. See page 47 for more  
information.  
You can also conserve battery power by using the [DISP]  
button to turn off the monitor screen.  
Monitor screen: On  
Flash: On (one flash every two shots)  
Image recorded about every 30 seconds  
Power off/on every 10 shots  
*3 Continuous Playback Conditions  
Temperature: 23°C (73°F)  
I Low Battery Indicator  
Scroll one image about every 10 seconds  
The following shows how the battery capacity indicator on  
the monitor screen changes as battery power is used. The  
indicator means that remaining battery power is low.  
Note that you will not be able to record images while the  
*4 Voice recording times are based on continuous  
recording.  
*5 Audio playback times are based on continuous output  
battery indicator is  
. Charge the battery immediately  
(through headphones).  
whenever either of these indicators appears.  
Voice recording and audio playback times apply to the  
EX-M20 only.  
The above values are based on a new battery starting  
from a full charge. Repeated charging shortens battery  
life.  
Battery Level  
Indicator  
High  
Low  
Battery life is greatly affected by how much you use flash,  
zoom and other functions, and how long you leave power  
turned on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
GETTING READY  
Failure to observe any of the following precautions  
while using the battery creates the risk of over-heating,  
fire, and explosion.  
Never use any other type of charger except the  
optional charger unit specified for the battery.  
Never try to use the battery to power any other  
device other than this camera.  
Never use or leave the battery near open flame.  
Never place the battery in a microwave oven, throw  
it into fire, or otherwise expose it to intense heat.  
Make sure the battery is oriented correctly when you  
load it into the camera or attach it to the optional  
charger unit.  
Power Supply Precautions  
Note the following precautions when handling or using the  
battery and the optional charger unit.  
I Battery Handling Precautions  
G SAFETY PRECAUTIONS  
Be sure to read the following Safety Precautions before  
trying to use the battery for the first time. Keep these safety  
precautions and all operating instructions on hand for  
future reference.  
NOTES  
Never carry or store the battery together with items  
that can conduct electricity (necklaces, pencil lead,  
etc.)  
Never try to take the battery apart, modify it in any  
way, or expose it to strong impact.  
The term batteryin this manual refers to the CASIO  
NP-20 Rechargeable Lithium Ion Battery.  
The term optional charger unitin the following  
precautions refers to the optionally available CASIO  
BC-10L Charger Unit.  
Do not immerse the battery in fresh water or salt  
water.  
Do not use or leave the battery under direct  
sunlight, in an automobile parked in the sun, or in  
any other area subject to high temperatures.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
GETTING READY  
Should you ever notice leakage, strange odor, heat  
generation, discoloration, deformation, or any other  
abnormal condition while using, charging, or storing a  
battery, immediately remove it from the camera or  
optional charger unit and keep it away from open flame.  
If the battery does not achieve full charge after the  
normal charging time has passed, stop charging.  
Continued charging creates the risk of overheating, fire,  
and explosion.  
Battery fluid can damage your eyes. Should battery  
fluid get into your eyes accidentally, immediately rinse  
them with clean tap water and then consult a physician.  
Be sure to read page 28 of this Users Guide and the  
instructions that come with the optional charger unit  
before using or charging the battery.  
If the battery is to be used by young children, make  
sure that a responsible adult makes them aware of the  
precautions and proper handling instructions and make  
sure that they handle the battery correctly.  
Should fluid from the battery accidentally get onto  
clothing or your skin, immediately rinse it off with clean  
tap water. Prolonged contact with battery fluid can  
cause skin irritation.  
G PRECAUTIONS DURING USE  
The battery is designed for use with this CASIO digital  
camera only.  
Use only the USB cradle that comes with the camera or  
the specified optional charger unit to charge the  
battery. Never use any other type of charger unit for  
charging.  
A new battery is not charged. Be sure to charge the  
battery before using it for the first time.  
Use of a battery in cold environments shortens the  
operating time you can expect on a full charge. Charge  
the battery in a location where the temperature is in the  
range of 10°C to 35°C (50°F to 95°F). Charging  
outside this temperature range can cause charging to  
take longer than normal or even cause charging to fail.  
Very limited operation following a full charge indicates  
that the battery has reached the end of its service life.  
Replace the battery with a new one.  
Never wipe the battery with thinner, benzene, alcohol,  
or other volatile agents or chemically treated rags.  
Doing so can cause deformation of the battery and lead  
to malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
GETTING READY  
G BATTERY STORAGE PRECAUTIONS  
I USB Cradle and AC Adaptor Precautions  
Make sure you remove the battery when you do not  
plan to use the camera for a long time. A battery left in  
the camera discharges very small amounts of power  
even when power is turned off, which can lead to a  
dead battery or the need for longer charging before the  
next use.  
Never use an electrical outlet whose voltage  
is outside the rating marked on the AC  
adaptor. Doing so can create the danger of  
fire or electric shock. Use only the bundled  
AC adaptor specified for this camera.  
Do not allow the AC adaptor cord to become  
cut or damaged, do not place heavy objects  
on it, and keep it away from heat. A damaged  
power cord creates the risk of fire and electric  
shock.  
Store the battery in a cool, dry place (20°C (68°F) or  
lower).  
G USING THE BATTERY  
Never try to modify the AC adaptor cord, or  
subject it to severe bending, twisting, or  
pulling. Doing so creates the risk of fire and  
See page 28 of this manual or the instructions that  
come with the optional charger unit for information  
about charging procedures and charging times.  
When transporting a battery, keep it either loaded in  
the camera or stored in its case.  
Caution!  
electric shock.  
Never touch the AC adaptor while your hands  
are wet. Doing so creates the risk of electric  
shock.  
Do not overload extension cords or wall  
outlets. Doing so creates the danger of fire  
and electric shock.  
Should the cord of the AC adaptor become  
damaged (exposed internal wiring), request a  
replacement from a CASIO authorized service  
center. A damaged AC adaptor cord creates  
the danger of fire or electric shock.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
GETTING READY  
Use the AC adaptor where it will not be  
Turning the Camera On and Off  
Press the power button to turn the  
camera on and off.  
Pressing the power button to turn  
on the camera causes the  
operation/flash charge lamp to turn  
green. Press the power button  
again to turn off the camera.  
splashed with water. Water creates the risk of  
fire and electric shock.  
Do not place a vase or any other container  
filled with liquid on top of the AC adaptor.  
Water creates the risk of fire and electric  
shock.  
ON/OFF  
Caution!  
Power button  
Make sure you always remove the camera from the USB  
cradle before connecting or disconnecting the AC  
adaptor.  
Charging, USB data communication, and using the Photo  
Stand feature can cause the AC adaptor to become  
warm. This is normal and does not indicate malfunction.  
Unplug the AC power cord from the power outlet  
whenever you are not using it.  
IMPORTANT!  
If camera power is turned off by the Auto Power Off  
feature, press the power button to turn it back on  
again.  
Never place a blanket or any other cover on the AC  
adaptor. Doing so creates the risk of fire.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
GETTING READY  
5. Use [̆] and [̄] to change the currently  
Auto Power Off (APO)  
Auto Power Off (APO) automatically turns off the camera  
when you do not perform any operation for a certain  
amount of time.  
selected setting, and then press [SET].  
To do this:  
Select this setting:  
Set the Auto Power Off trigger time to  
2 minutes  
2 min  
5 min  
1. Turn on the camera, and then align the mode  
Set the Auto Power Off trigger time to  
5 minutes  
selector with “ ” (REC) or “ ” (PLAY).  
2. Press [MENU].  
IMPORTANT!  
Auto Power Off is automatically disabled under any  
one of the following conditions.  
3. Use [̇] and [̈] to select the Set Uptab.  
While the camera is connected to a computer via  
the USB cradle  
While a slideshow is playing  
While playing back a voice recording file (EX-M20  
only)  
4. Use [̆] and [̄] to select Auto Power Off,  
and then press [̈].  
See page 37 for information about how to use  
menus.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
GETTING READY  
2. Press [MENU].  
Using the On-screen Menus  
[MENU]  
Tab  
Pressing [MENU] displays menus on the monitor screen  
that you can use to perform various operations. The menu  
that appears depends on whether you are in the REC  
mode or the PLAY mode. The following shows an example  
menu procedure in the REC mode.  
MENU  
[SET]  
Mode selector  
1. Turn on the camera,  
DISP  
and then align the  
mode selector with  
Settings  
Selection cursor (indicates the  
currently selected item)  
(REC) to enter the  
[̆][̄][̇][̈]  
REC mode.  
If you want to enter the  
PLAY mode instead, you  
would align the mode  
selector with “  
(PLAY).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
GETTING READY  
G Menu Screen Operations  
3. Press [̇] or [̈] to select the tab you want,  
and then press [SET] to move the selection  
cursor from the tab to the settings.  
When you want to do this:  
Move between tabs  
Do this:  
Press [̇] and [̈].  
Move from the tab to the  
settings  
4. Use [̆] and [̄] to  
select the feature  
whose setting you  
want to configure,  
and then press [̈].  
Press [̄].  
Move from the settings to  
the tab  
Press [̆].  
Move between the settings  
Press [̆] and [̄].  
Display the options  
available for a setting  
Press [̈] or press [SET].  
Press [̆] and [̄].  
Instead of pressing [̈],  
you could also press  
[SET].  
Example: To select the  
Select an option  
Flashitem.  
Register an option  
selection and exit the menu Press [SET].  
screen  
5. Use [̆] and [̄] to change the currently  
Register an option  
selected setting.  
selection and return to the  
menu screen  
Press [̇].  
Exit the menu screen  
Press the [MENU] button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
GETTING READY  
6. Perform one of the following operations to  
apply the setting you configured.  
Configuring Display Language and Clock  
Settings  
Be sure to configure the following settings before using the  
camera to record images.  
To do this:  
Perform this key operation:  
Press [SET].  
Apply the setting and exit  
the menu screen.  
Display language  
Home city  
Date Style  
Apply the setting and  
return to feature selection  
in step 4.  
Press [̇].  
Date and time  
Apply the setting and  
return to tab selection in  
step 3.  
1. Press [̇].  
2. Use [̆] to move back up to  
tab selection.  
Note that the current date and time settings are used by  
the camera to generate the date and time that are stored  
along with image data, etc.  
See Menu Referenceon page 173 for more information  
about menus.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
GETTING READY  
IMPORTANT!  
To configure display language and clock  
settings  
The cameras clock settings are cleared whenever  
power is totally cut off. This can happen if the battery  
goes dead while the camera is not being supplied  
power by the USB cradle. The clock setting screen  
will appear automatically the next time you turn on  
power after the settings are cleared. Set the date  
and time before using the camera.  
1. Press the power button to turn on the camera.  
2. Use [̆], [̄], [̇], and  
[̈] to select the  
language you want,  
and then press [SET].  
The current date and time settings will be cleared if  
the battery remains dead without being charged for  
about two days.  
Recording images without configuring the clock  
settings causes incorrect time information to be  
registered. Be sure to configure the clock settings  
before using the camera.  
: Japanese  
English  
: English  
Français : French  
Deutsch : German  
Español : Spanish  
Italiano  
Português : Portuguese  
: Chinese (Complex)  
: Italian  
: Chinese (Simplified)  
: Korean  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
GETTING READY  
3. Use [̆], [̄], [̇], and  
[̈] to select the  
6. Use [̆] and [̄] to  
change the date format  
setting, and then press  
[SET].  
geographical area  
where you live, and  
then press [SET].  
4. Use [̆] and [̄] to  
select the name of the  
city where you live,  
and then press [SET].  
Example: December 24, 2003  
To display the date like this:  
03/12/24  
Select this format:  
YY/MM/DD  
DD/MM/YY  
MM/DD/YY  
24/12/03  
12/24/03  
5. Use [̆] and [̄] to select the summer time  
(DST) setting you want, and then press [SET].  
When you want to do this:  
Select this setting:  
Keep time using summer time  
(Daylight Saving Time)  
On  
Off  
Keep time using standard time  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
GETTING READY  
7. Set the current date  
and the time.  
To do this:  
Do this:  
Change the setting at the current  
cursor location  
Press [̆] and [̄].  
Press [̇] and [̈].  
Move the cursor between settings  
Toggle between 12-hour and 24-  
hour timekeeping  
Press [DISP].  
8. Press [SET] to register the settings and exit  
the setting screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  

BenQ Projector MX620ST User Manual
Blanco Indoor Furnishings 157 075R User Manual
Bosch Appliances Coffeemaker TCA 6301 UC User Manual
BridgeWave Network Router AR60X User Manual
Briel Coffeemaker ES161A TB User Manual
Briggs Stratton Pressure Washer 020212 1 User Manual
Brother Wireless Office Headset BAS 300G User Manual
Canon Camcorder Accessories Sx200 Is User Manual
Canon Scanner 9900F User Manual
Canon Scanner FB620U User Manual