MA0506-EA
Operation Guide DQ-746
ILLUSTRATION
GENERAL GUIDE
1 SNOOZE/LIGHT button
• Press this button to illuminate the display for about five seconds.
• Pressing this button while the alarm is sounding stops the alarm.
INVALID
RESET
2 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
3 + / – buttons
Use these buttons to change the alarm time or the setting that is flashing on the display.
4 °C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
5 SET button
Use this button when setting the current time.
INVALID
RESET
6 RESET button
Press this button to reset the clock after replacing its batteries.
• Buttons marked “INVALID” have no function.
°C/°F
SET
USING THE CLOCK
1. Press the SET button (5) to cycle through the setting screens as shown below.
°C/°F
SET
Normal Timekeeping Screen
Year Setting Screen
Month and Day
Setting Screen
Time Setting Screen
12-hour/24-hour
Timekeeping Screen
2. While the screen you want is displayed, use the + and – buttons
(3) to change the flashing digits.
• Holding down + or – changes the flashing digits at high speed.
• You can set the year in the range of 2000 to 2039. The day of the
week is set automatically in accordance with the date setting.
• Pressing + or – while the Time Setting Screen is on the display
causes the seconds count to be reset to 00.
• Each press of + or – while the 12-hour/24-hour Timekeeping
Screen is on the display toggles between 12-hour and 24-hour
timekeeping.
• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
–
+
Press to
Press to
• Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
decrease
the flashing
digits.
increase
the flashing
digits.
°C/°F
SET
Alarm Off
Snooze Alarm On
PM indicator
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.
• The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for
about three minutes without performing any operation.
Current time
(Hour, minutes,
seconds)
Snooze on
indicator
Date
(month - day)
Current
temperature
Day of the week
Alarm time
Alarm on indicator
1
Download from Www.Somanuals.com. All Manuals Search And Download.
|