Release Notes
Canon IP Cameras Supported on Digital Sentry
Integral Digital Sentry® digital video management systems (DVMS) support certain
Canon® IP camera models. The camera models listed in this document can be used
with Digital Sentry IP camera driver 6.8.0.126 and later. Refer to each camera’s table for
information about the hardware and software features validated for use on a Digital
Sentry system. Any general limitations or special instructions are listed at the beginning
of the document, and any model-specific information is listed after each table. For
information about the general usage of each camera, refer to the camera manufacturer’s
documentation.
To obtain the latest IP camera driver or documentation for use with Digital Sentry, refer
Canon VB-C50iR
Firmware
1.2 Revision 68
640 x 480, 320 x 240, 160 x 120
1 to 30
Supported Resolutions
Frames per Second (FPS)
Number of Quality Settings
Supported Codec
Not applicable
MJPEG
Supported Motion Detection Integral
Pan/Tilt/Zoom (PTZ)
Yes (refer to NOTES)
NOTES:
• To view live video on the camera’s Web page, you must install Java™. Visit the Java
complete, refresh the live view on the Web page.
• Quality settings in DSAdmin do not work with this camera.
• Presets, iris, and focus functionality will be supported by Digital Sentry in a future
release.
C1004RN (1/09)
Page 1 of 2
Download from Www.Somanuals.com. All Manuals Search And Download.
|