Unpack the MultiPASS C545
Set Up the MultiPASS
Place the main unit of the MultiPASS on a level surface with plenty of room to work.
1
2
1
3
Carefully remove all items from
Open the document tray.
the box.
MultiPASS, PC Modem and Telephone
1
Attach the sending document support.
Telephone
Remove the protective sheet covering the
operation panel.
Remove these items from the documentation package:
this Quick Start Guide, the MultiPASS C545 Installer CD
packet, MultiPASS C545 User's Manual, Registration card,
and Warranty card.
Fit the tabs on the sending
document support into the
slots above the ADF.
Make sure the
ADF
Wall Jack
PC
MultiPASS, PC Modem and
Answering Machine
support curves
toward the back
of the unit.
Remove these hardware items from the top tray:
Answering
Machine
TELEPHONE
Wall Jack
2
LINE
Connect the phone line.
PC
POWER
CORD
SENDING DOCUMENT
SUPPORT
The MultiPASS unit has three telephone jacks (located
on the left side of the unit) that will accept standard
line connections.
MultiPASS, PC Modem, Answering
Machine and Telephone
Telephone
USB-TO-PARALLEL
CABLE
4
Open the operation panel.
L
Use the bottom jack to connect the wall
CartrIidngke
BCl-21
Black
Made in
Japan
Jacks on
MultiPASS
jack to the MultiPASS with the supplied
line cord (unless connected with Caller ID).
The other two jacks are pass-through ports
to connect other devices to the MultiPASS
and your telephone service. Select from the
options in the diagram below to configure
your telephone device to work in
Use both hands to grip the operation panel, and
gently pull it toward you until it opens partially.
BC-21e COLOR
BJ CARTRIDGE
Wall Jack
SB-21 BJ CARTRIDGE
STORAGE BOX
PC
EXTRA BCI-21
BLACK BJ TANK
Remove the soft styrofoam sheet from the unit's
Automatic Document Feeder (ADF).
3
Connect the USB—to—Parallel cable
and power cord.
Lift out the MultiPASS unit from the bottom.
L
conjunction with your MultiPASS.
Make sure the computer is turned off.
If you have only one telephone line and plan to use the
MultiPASS for receiving both faxes and voice calls, you
must attach a telephone and/or answering machine to
the unit.
Connect the USB—to—Parallel cable to the
MultiPASS and to your
computer.
If you use Caller ID with any of these
configurations, place the Caller ID device
between the MultiPASS and the wall jack.
Important! Save the box and shipping materials.
You may need them later if you have to transport
the MultiPASS.
Press the operation panel closed until it clicks
into place.
Recommended Device Connections
MultiPASS Only
Receive Modes
Fax Only
or DRPD
2
Remove all pieces of shipping tape.
5
Open the printer cover.
Wall Jack
Remove all pieces of shipping tape from the outside of
the printer. Be sure to remove the tape from the back of
the printer also.
Check for any tape or shipping material inside
the unit and remove it.
Power Cord
(to outlet)
USB—to—Parallel Cable
MultiPASS and Telephone
Fax/Tel, DRPD,
or Manual
(to computer)
Telephone
MULTI-PURPOSE TRAY
Connect the power cord to the MultiPASS and to
a wall outlet. The MultiPASS has no power switch.
The power is on as long as the system is plugged in.
Remove the protective plastic piece from the sheet feeder.
(SHEET FEEDER) –
holds paper for
printing or receiving faxes
PRINTER
COVER
Wall Jack
MultiPASS and Answering Machine
Ans.Machine
Ans.Machine
PROTECTIVE
PLASTIC
The MultiPASS is equipped with a 3-prong,
grounding-type plug. This plug will only fit
into a grounding-type outlet. This is a safety
feature. Do not defeat the safety purpose of
Answering
Machine
MULTI-PURPOSE TRAY
Wall Jack
(
FEEDER)
MultiPASS, Answering Machine and Telephone
AUTOMATIC
DOCUMENT
FEEDER
Caution
this plug. Make sure the socket-outlet is
located near the MultiPASS and is easily
accessible.
(ADF)
Answering
Telephone
Wall Jack
Machine
MultiPASS and PC Modem
PC
Fax Only
or DRPD
AUTOMATIC DOCUMENT FEEDER (ADF) –
holds documents to be
Note that tape may not be in the exact locations shown.
faxed, copied or scanned
Wall Jack
CANON/MPC545 Q.S.G: Pages 2 & 3 - File: 545QS2-3.eps
Wendi Swanlund Correx> August 19 '99
PAGE 2 (BACKS COVER/1)
PAGE 3 (BACKS 6)
Download from Www.Somanuals.com. All Manuals Search And Download.
Load a Stack of Paper
For printing or receiving faxes, the MultiPASS uses paper from the sheet feeder.
MultiPASS Software
The MultiPASS comes with the following software: MultiPASS Toolbar, MultiPASS Printer Driver,
ScanTastic™ for MultiPASS, and Canon Creative for MultiPASS.
5
2
The sheet feeder is
the larger capacity
tray behind
ADF
Sheet Feeder
Insert the stack of paper.
Your Canon Creative for MultiPASS software includes:
(holds documents (holds blank paper
to be faxed, copied,
or scanned)
for printing or
receiving faxes)
Make sure the print-side of the paper is face-up.
Align the right edge of the stack with the right side
of the sheet feeder.
OfficeReady™ CC
the ADF.
Now you can enhance your image and boost your performance with professionally designed Microsoft® Office
templates –for business and personal use.
250 templates integrated for Word®, Excel®, and PowerPoint®
Perfect for business and personal applications
Customized templates create professional documents in seconds
Integrated tools simplify advanced office-document functions
You must have Microsoft Office installed on your system to use OfficeReady CC.
Canon Photo
1
Pull the paper rest up until it stops.
With Canon Photo, you can digitally enhance and retouch your photographs, share them with friends over the Internet,
explore special effects and create wonderful photo projects:
Move the paper guide to
the left to match the size
of your paper.
Sheet Feeder
Do not fill the sheet feeder above the
limit mark ( ). The sheet feeder holds
up to 100 sheets of plain paper (20 lb
or 75 g/m2).
Organize and enhance your digital pictures easily
Add pictures, movies, and sound to your e-mail
Create photo projects from over 250 ready-made templates
Canon Photo is backed by Canon's photographic expertise and leadership
Adjust the paper guide snugly against the side of the
stack of paper.
TextBridge® Pro
The powerful, easy way to scan documents into your personal computer for editing as text:
Fan a stack of paper. Fan the edge that will feed into
the MultiPASS first; then tap the stack on a flat
surface to even its edges.
Turn paper into PC documents without retyping. TextBridge Pro is a full-featured, highly accurate and easy-to-use
document recognition package.
TextBridge Pro offers increased accuracy and improved duplication of page layout including pictures and tables.
Edit scanned documents with a word processor, spreadsheet, or HTML editor
What's Next?
After using this Quick Start Guide to unpack and set up your new MultiPASS unit, you'll want to look at the rest of
your documentation. All the online manuals in Adobe Acrobat format are located on the MultiPASS Installer CD
and in the MultiPASS Desktop Manager folder on your hard drive.
MultiPASS C545 User's Manual (in Adobe® Acrobat® PDF format)
This manual describes how to use the MultiPASS as a monochromatic or color printer and covers the basics on
how to send and receive faxes. It also includes maintenance, troubleshooting, and specifications.
MultiPASS Desktop Manager Software Guide (in Adobe® Acrobat® PDF format)
Use the online Software Guide to find out how to use the MultiPASS C545 Printer Driver,
ScanTastic scanning software, MultiPASS Fax Setup Utility and the MultiPASS Toolbar.
Standalone Fax Manual (in Adobe® Acrobat® PDF format)
If you are NOT going to connect the MultiPASS to your computer, use this manual to find out how you use the
operation panel on the MultiPASS to control all your faxing and receiving functions.
PAGE 7 (BACKS 4)
CANON/MPC530\560 Q.S.G: Pages 6 & 7 - File: 560QS6-7.eps
Wendi Swanlund UPDATE4/FINAL> December 26, 1999
PAGE 6 (BACKS 5)
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing an Image or Document
To print an image or a document, make sure you have paper loaded in the multi-purpose tray. Start the application
that you used to create the image or document. Make sure the Canon MultiPASS C545 printer is selected as your default
printer in the Chooser. In the application, choose Print or Page Setup from the File menu. Specify any special printing
options, then click Print to start the print job. See your online MultiPASS Desktop Manager Software Guide for details.
Quick Start Guide
Faxing or Scanning an Image or Document
For faxing, you load the document face-down in the Automatic Document Feeder (ADF), dial the number you are
faxing to, and then press the Start/Scan button on the MultiPASS.
To scan, load the image or document in the Automatic Document Feeder (ADF). Scan the document in the following ways.
Scanning With the MultiPASS Toolbar
Scanning With ScanTastic or Other Applications
Use the MultiPASS Toolbar to scan a document
directly into an application.
To set more detailed scan options, click the ScanTastic Central
button on the Toolbar, or select ScanTastic Central from the Apple
menu. You can also use ScanTastic as a plug-in, to scan directly
to applications that support the Adobe Photoshop plug-in standard.
If you installed Canon Photo and TextBridge
Pro, or if PictureViewer and SimpleText are
on your system, just click any of the application
buttons to scan directly into that application.
Scanning With the Start/Scan Button
You can insert a document into the ADF and press the Start/Scan
button on the operator panel on the front of the MultiPASS. The
factory default setting for this button is to scan into Canon Photo,
if you have it installed. To customize the scan settings and scan
destination, click and hold the Start/Scan button on the Toolbar.
To customize the default settings associated
with a Toolbar button, click and hold the
button. To add an application to the Toolbar,
drag the application icon onto the Toolbar.
The MultiPASS Toolbar must be
running to a scan with the
Start/Scan button on the operator
panel of the MultiPASS.
The Toolbar appears automatically. If you quit
the Toolbar, relaunch it by selecting MultiPASS
Toolbar from the Apple menu.
See your online MultiPASS Desktop Manager Software Guide for
complete details on using the Toolbar and ScanTastic.
Copying an Image or Document
To copy an image or a document, make sure you have paper loaded in the sheet feeder. Next, place the image or
document you want to copy face-down in the ADF. On the operation panel, press the Copy button and then press the
Start/Scan button. (To make multiple copies, press Copy, enter the number of copies with the numeric buttons, and
then press Start/Scan. To make one color copy, press Color so the light comes on, press Copy, and then press Start/Scan.
See your online MultiPASS C545 User's Manual for details.)
IMPORTANT
Numeric Buttons
Follow the steps
in this Quick Start
Guide to unpack
and set up your new
MultiPASS C545
multifunction printer.
A Universe of Creative Projects
®
ENERGY STAR Compliant
©2000 Canon Computer Systems, Inc. BCI, BJ, Bubble Jet and MultiPASS are trademarks of Canon Inc.
Print Planet is a service mark of Canon Computer Systems, Inc. Mac and the Mac logo are trademarks of
Apple Computer, Inc., registered in the U.S. and other countries. All other products and brand names are
trademarks of their respective owners.
Printed in U.S.A.
CST-5257-000
30-32236-0100
Download from Www.Somanuals.com. All Manuals Search And Download.
|