Deluxe Power Grip for Canon 40D/50D
INSTRUCTION MANUAL
VIV-PG-50D
Download from Www.Somanuals.com. All Manuals Search And Download.
WHAT TO DO WHEN SERVICE IS NEEDED
STEP 1. Package the product and relevant accessories carefully, using ample padding materials
and a sturdy mailing container to prevent damage in transit.
STEP 2. Include in package:
a) Evidence of date and place of original purchase (for example, a copy of your sales receipt).
b) Detailed description of your problem.
c) When possible, a sample evidencing the problem.
STEP 3. Return item (insured) to: Vivitar
Attn:Technical Support
195 Carter Drive
Edison NJ 08817
When service is complete, the product will be returned to you shipping prepaid. In the event the
product is deemed to be not faulty or the defect is a result in wear and tear, Vivitar may levy a
handling charge for the return ofthe product.
This warranty gives you specific legal rights.You may also have other rights which vary from
country and State to State thereof.
-2-
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Congratulations on your purchase of the VIV-PG-50D. The VIV-PG-50D is a battery grip for
Canon EOS 50D, 40D, 30D and 20D digital SLR cameras. It is capable of holding two
BP-511A or six AA sized batteries. It is also equipped with a vertical shutter button, a dial,
an AE lock/FE lock button, and an AF point selection button which will enable shooting in
the same way as a horizontal grip.
Note: The E-1 hand strap (sold separately) can be used for enabling a more secure grip.
Battery packs BP-514, BP-511 and BP-512 can also be used.
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
A Quick Look at Your Device
1. Attachment Screw
2. Guide Pin
3. Attach/Detach Knob
4. Battery release lever
5. DC coupler cord mount
6. Battery compartment release lever
7. Electrical contacts
8. Camera battery compartment cover
slot
9. Vertical grip ON/OFF switch
10. Vertical grip AE lock/FE lock/Index/Reduce
button
11. Vertical grip AF point selection/Magnify button
12. Battery compartment cover
13. Battery compartment
14. Vertical grip shutter button
15. Vertical grip main dial
16. Hand strap mount
17. Tripod socket
18. Battery magazine
19. Protective cover
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching Your Power Grip to Your Camera
1. Remove the battery that is in
your camera (See figure 1 to the
left.)
2. Detach the camera’s battery compartment
cover.
If you are using EOS 40D or 50D cameras:
Place your camera on a desk or other flat
surface and hold it firmly so that it does not
drop. Next, pull the battery compartment cover
while it is opened at a slanted angle to remove
it. See figure 2-1.
If you are using EOS 30D or 20D cameras:
See figure 2-2 to remove the battery compart-
-5-
ment cover.
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching Your Power Grip to Your Camera (continued)
3. Insert the detached
cover into its storage slot to
ensure that it will not be
lost. See figure 3.
4. Remove the protective cover, and
then insert the electrical contacts of
your power grip into the battery
compartment of your camera. See
figure 4.
5.Align the attachment screw with the
camera’s tripod socket, and then turn
the attach/detach knob to tighten the
power grip securely to your camera.
See figure 4.
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching Your Power Grip to Your Camera (continued)
NOTE: Be sure to attach the battery grip to your camera before loading the battery
magazine into the battery grip. Your camera may not display the correct amount of power
provided by your battery grip if you attach the battery grip with the battery magazine already
loaded.
Before removing your battery grip from your camera, make sure to turn the power switch on
your camera to the OFF position, and to also remove the battery magazine. Once the
battery grip is removed, attach the included protective cover over the electric contacts of
your battery grip.
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting Battery Packs Into Your Power Grip
1. Slide the lever as shown by the
arrow in figure 5 and open the cover.
See figure 5.
2. Press both release levers outward
in the battery compartment and
remove the battery magazine. See
figure 6.
-8-
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting Battery Packs Into Your Power Grip (continued)
3. Check the illustration on the
battery compartment cover, and hen
insert the batteries all the way in.
See figure 7.
4. Close the battery compartment cover until it clicks into place.
-9-
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting Battery Packs Into Your Power Grip (continued)
NOTE: If only one battery will be used, it may be inserted in either the right or left sides. If
two batteries packs are inserted, power is supplied simultaneously by both battery packs.
Two battery packs at different charging levels can be used without any complications.
-10-
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting AA Batteries
1. Insert your AA batteries into the
battery magazine. Make sure the
batteries are inserted with the + and –
ends in the directions shown on the
battery magazine. See figure 8.
2. Turn over the battery magazine so
that the inserted batteries are facing
downward, and then insert the battery
magazine into the battery grip until the
release lever locks into place. See
figure 9.
3.Close the battery compartment cover until it clicks into place.
-11-
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting AA Batteries (continued)
NOTE: When AA sized batteries are being used, the continuous shooting speed during AI
Servo AF will slow down. Also, fewer images can be shot. Therefore, usage of AA
batteries is recommended only for emergencies. Use of AA batteries is also not recom-
mended when connecting the camera to a computer.
When using disposable AA batteries the camera may not function when using at tempera-
tures below 20°C/68°F or for certain battery brands and in some storage conditions.
Only insert six new batteries that are of the same brand. Do not use old and new batteries
together.
-12-
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the DC Coupler
To connect to a household power outlet use the AC adapter kit ACK-E2 (sold separately).
1. Connect the DC coupler to the AC adapter, and then connect the power cord to a
power outlet.
2. Load the DC coupler to the left
side of the battery compartment,
(see figure 10), and pass the cord
through the cord mount (see
figure 10).
3. Insert the DC coupler all the way in.
4. Check that the cord passes properly through the cord mount and close the cover
until it clicks into place.
-13-
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the DC Coupler (continued)
NOTE: Do not connect or disconnect the power cord while the camera power switch in the
ON position. The DC coupler can also be used with the compact power adapter CA-PS400
and the DC coupler DR-400. Both are sold separately.
-14-
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Battery Grip
Turn the vertical grip ON/OFF switch to
the ON position (see figure 11) in order to
make the buttons and dials on your power
grip function in the same way as those on
your camera.
When shooting in the horizontal grip position, turn the vertical grip ON/OFF switch to the
OFF position so that you do not accidentally use the buttons or dials on the power grip.
CAUTION
Remove the power supply from your power grip when your camera will not be used for an
extended period of time.
Never attempt to disassemble or repair this device. Any malfunction or accident resulting
from such action is not covered by your warranty.
-15-
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Life
Temperature: +23°C/0°C, 73°F/32° (Number of shots aproximate)
MODEL
Power Supply
BP-511A x 2
No Flash
50% Flash
1600/1400
EOS 40D
&
2200/1900
AA Alkaline Batteries
BP-511A x 2
EOS 50D
400/200
2200/1800
400/200
2200/1500
250/0
300/100
1400/1200
300/100
1400/1100
120/0
EOS 30D
EOS 20D
AA Alkaline Batteries
BP-511A x 2
AA Alkaline Batteries
*Based on CIPA (Camera &Imaging Products Association) testing standards. No live view shooting. The number
of images that can be shot is reduced by use of the LCD monitor and using the AF frequently without shooting.
-16-
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Type:
Battery grip for the EOS 50D/40D/30D/20D
Power Sources: (1) Battery Pack BP-511A/514/511/512
(2) AA size batteries: Alkaline batteries
(3) AC adapter kit ACK-E2 (not included)
Power Switch:
Dimensions:
Weight:
Camera’s power switch
142.7 (w) x 110.5 (H) x 75.7 (D) mm / 5.6(w) x 4.4(H) x 3(D) inches
Approximately 440g/11.5 oz.
-17-
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|