Camera User Guide
•
•
•
Before use, ure o read this guide, including the
safety prec.
This uide wiiliarize you with how to use the
camea corectly.
Keep the guide handy for future reference.
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary Notes and Legal Information
About Eye-Fi Cards
This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check with
the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many countries
or regions. Without approval, use of the card is not permitted. If it is unclear
whether the card has been approved for use in the area, please check with
the card manufacturer.
• Always confirm beforehand that memory cards are supported on other devices
such as card readers and computers (including the current version of your
operating system).
Preliminary Notes and Legal Information
•
•
Take and review some test shots initially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable fr any consequential damages
arising from any malfunction of a cra or accessory, including memory
cards, that results in the failure of aage to be recorded or to be
recorded in a way that is mareadable.
Images recorded by the camee intended for personal use. Refrain
from unauthorized recrding that infringes on copyright law, and note that
even for personal use, photography may contravene copyright or other
legal rights at some performances or exhibitions, or in some commercial
settings.
•
•
The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet design
specifications, in rare cases some pixels may be defective or may appear
as red or black dots. This does not indicate camera damage or affect
recorded images.
•
•
The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If covered, remove the film before
using the camera.
When the camera is used over an extended period, it may become warm.
This does not indicate damage.
Download from Www.Somanuals.com. All Manuals Search And Download. 3
Part Names and Conventions in This
Guide
Front dial
Mode dial
Lamp
Lens
Exposure compensation dial
Hot shoe
Zoom lever
(Pp up flash) switch
Flash
aker
g release button
DC coupler cable port
Memory card/battery cover
Tripod socket
Shooting: i (telephoto) /
j (wide angle)
Playback: k (magnify) / g (index)
Strap mount
Shutter button
Power button/lamp
•
•
In this guide, icons are used to represent the corresponding camera
buttons and dials on which they appear or which they resemble.
The following camera buttons and controls are represented by icons.
z Front dial
on front
on back
on back
on back
o Up button
q
Left button
7 Control dial
m FUNC./SET button
Right button on back
p Down button on back
on back
r
•
•
•
•
On-screen text is indicated in brackets.
: Important information you should know
: Notes and tips for expert camera use
(p. xx): Pages with related information (in this example, “xx” represents a
page number)
•
Instructions in this guide apply to the camera under default settings.
4 Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Conventions in This Guide
(Shortcut) / c (Direct print) button
Remote terminal
HDMITM terminal
n button
(Metering) button
ISO peed / Up button
e (acro) / f (Manual focus) /
eft bton
+ (AE lock/FE lock) / d (Jump) button
(AF Frame Selector) /
a (Single image erase) button
Screen (LCD monitor)
Diopter adjustment dial
Viewfinder
Microphone
Control dial
Indicator
1 (Playback) button
Movie button
FUNC./SET button
h (Flash) / Right button
l (Display) / Down button
AV OUT (Audio/video output) /
DIGITAL terminal
z Turning the control dial is one way to choose
setting items, switch images, and perform
other operations. Most of these operations
are also possible with the opqr buttons.
•
•
For convenience, all supported memory cards are simply referred to as
“the memory card” .
The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
Still Images
: Indicates that the function is used when shooting or
viewing still images.
Movies
: Indicates that the function is used when shooting or
viewing movies.
Download from Www.Somanuals.com. All Manuals Search And Download. 5
Contents
Adjusting Basic Camera
Tips on Using Included
Download from Www.Somanuals.com. All Manuals Search And Download. 7
Contents: Basic Operations
4 Shoot
Shooting people well
I
V
w
P
Portraits
Kids and Pets
At the Beach
Against Snow
Matching specific scenes
J
Landscape
Night Scenes
Sports
S
Under Water
t
Fireworks
O
ge
Applying special effects
Vivid Colors
Poster Effect
“Aged” Photos
Fish-Eye Effect
Miniature Effect
Toy Camera Effect
Monochrome
8 Download from Www.Somanuals.com. All Manuals Search And Download.
Contents: Basic Operations
1 View
z On a TV ...................................................................................... 186
E Shoot/View Movies
c
Print
Save
Download from Www.Somanuals.com. All Manuals Search And Download. 9
Safety Precautions
• Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
• The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
• Be sure to also check the guides included with any separately sold accessories you use.
Denotes the possibility of serious injury or death.
Warning
• Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular,
remain at least one meter (39 inches) away from infants when using the flash.
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
• Use only recommended power sources.
• Do not attempt to disassemble, alter or apply heat to the product.
• Avoid dropping or subjecting the product to severe impacts.
• To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
• Stop using the product immediately if it emits smoe, a strange smell, or
otherwise behaves abnormally.
•
•
Do not use organic solvents such as alcoholine, othinner to clean the product.
Do not let the product come into contith ater (e.g. sea water) or other liquids.
• Do not allow liquids or foreign objentr the camera.
This could result in electrical shok or fir
If liquids or foreign objects come nto contact with the camera interior, immediately turn
the camera off and remove the baery.
If the battery charger becomes wet, unplug it from the outlet and consult your camera
distributor or a Canon Customer Support Help Desk.
• Do not look through the viewfinder at bright light sources (such as the sun on a
clear day).
This could damage your eyesight.
• Use only the recommended battery.
• Do not place the battery near or in direct flame.
• Unplug the power cord periodically, and using a dry cloth, wipe away any dust
and dirt that has collected on the plug, the exterior of the power outlet, and the
surrounding area.
• Do not handle the power cord with wet hands.
• Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
• Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery
electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.
10Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
• Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of
electronic instruments and other devices. Exercise adequate caution when using the
camera in places where use of electronic devices is restricted, such as inside airplanes
and medical facilities.
• Do not play the supplied CD-ROM(s) in any CD player that does not support data
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of
a CD-ROM played on an audio CD player (music player). Additionally, this could damage
the speakers.
Denotes the possibility of injury.
Caution
• When holding the camera by the strap, be careful not to bang it, subject it to
strong impacts or shocks, or let it get caught on other objects.
• Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
• When using the flash, be careful not to ver iith your fingers or clothing.
This could result in burns or damage to the
• Avoid using, placing or storing odct in the following places:
- Places subject to strong sunligh
- Places subject to tempertures ab0 °C (104 °F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in
electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.
• Viewing images on the camera screen for prolonged periods may cause
discomfort.
Denotes the possibility of damage to
the equipment.
Caution
• Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
• When using the camera on a beach or at a windy location, be careful not to allow
dust or sand to enter the camera.
This may cause the product to malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download1. 1
Safety Precautions
• In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.
• Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
• Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
• Unplug the battery charger from the power outlet after charging is complete, or
when you are not using it.
• Do not place anything, such as cloth, on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort,
resulting in fire.
• Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or
damage.
• When putting the camera in your bag, close the cen to face inward to ensure
that hard objects do not come into contach the creen.
• Do not attach any hard objects to the cam
Doing so may cause malfunctions or dathe creen.
12Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Preparations
Prepare for shooting as follows.
Attaching Accessories
Attach the strap.
z Attach the included strap to the camera as
shown.
z On the other side of the camera, attach the
strap the same way.
Attach the lens cap to the strap.
z Remove the lens cap from the lens and
attach the lens cap cord to the strap.
z Always remove the lens cap before turning
the camera oTry attaching the lens cap to
the neck strawhen the cap is not in use.
z Keep ens cp on the lens when the
ra s not in use.
Holding the Camera
z Place the strap around your neck.
z When shooting, keep your arms close to your
body and hold the camera securely to
prevent it from moving. If you have raised the
flash, do not rest your fingers on it.
Download from Www.Somanuals.com. All Manuals Search And Download1. 3
Initial Preparations
Charging the Battery
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
Remove the cover.
Insert the battery.
z After aligning the o marks on the battery and
charger, insert the battery by pushing it in
(
) and down ( ).
Charge the btery.
z For CB-2Flip out the plug ( ) and plug
the ger nto a power outlet ( ).
For LCE: Plug the power cord into the
charger, then plug the other end into a power
outlet.
CB-2LC
CB-2LCE
X The charging lamp turns orange and
charging begins.
X When the charging is finished, the lamp turns
green.
Remove the battery.
z After unplugging the battery charger, remove
the battery by pushing it in ( ) and up ( ).
14Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Preparations
• To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
• For battery chargers that use a power cord, do not attach the charger
or cord to other objects. Doing so could result in malfunction or
damage to the product.
• For details on charging time and the number of shots and recording time
possible with a fully charged battery, see “Specifications” in the Getting Started
guide.
Inserting the Battery and Memory Card
Insert the included battery and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted in
another device), you should format the memory card with this camera
(p. 171).
Cheche card’s write-protect tab.
z ordg is not possible on memory cards
write-protect tab when the tab is in the
lod (downward) position. Slide the tab up
until it clicks into the unlocked position.
Open the cover.
z Slide the switch ( ) and open the cover
(
).
Insert the battery.
z While pressing the battery lock in the
direction of the arrow, insert the battery
facing as shown and push it in until it clicks
into the locked position.
Terminals Battery Lock
Download from Www.Somanuals.com. All Manuals Search And Download1. 5
Initial Preparations
z If you insert the battery facing the wrong way,
cannot be locked into the correct position.
Always confirm that the battery is facing the
right way and locks when inserted.
Insert the memory card.
z Insert the memory card facing as shown until
it clicks into the locked position.
z Make sure the memory card is facing the right
way when you insert it. Inserting memory
cards facing the wrong way may damage the
camera.
Label
Close the cover.
z Lower the cover in the direction of the arrow
and press it until it clicks into the closed
position.
Removing the Battery anmory Card
Remove the battery.
z Open the cover and press the battery lock in
the direction of the arrow.
X The battery will pop up.
Remove the memory card.
z Push the memory card in until it clicks, and
then slowly release it.
X The memory card will pop up.
16Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Preparations
Using the Screen
Prepare the screen for use.
z Open the screen ( ) and rotate it toward the
lens 180° ( ).
z Close the screen in this orientation ( ).
• The screen can only open to approximately 175° in direction
. Be
careful not to open the screen any further than this, as it will damage
the camera.
Adjusting the Screen Angle and Orientation
z You can adjust the angle and orientation of
the screen as needed, to suit shooting
conditions.
z To prthe sreen when the camera is not
se, ways keep it closed and facing the
a body.
• If the screen is cloed and facing the camera body, you will not be
able to shoot a movie.
• When including yourself in shots, you can view a mirror image of yourself by
rotating the screen around toward the front of the camera. To cancel reverse
display, press the n button, choose [Reverse Disp.] on the 4 tab, and
press the qr buttons to choose [Off].
Download from Www.Somanuals.com. All Manuals Search And Download1. 7
Initial Preparations
Setting the Date and Time
A screen for setting the date and time is displayed the first time you turn the
camera on. Be sure to specify the date and time, which is the basis for dates
and times added to your images.
Turn the camera on.
z Press the power button.
X The [Date/Time] screen is displayed.
Set the date and time.
z Press the qr buttons to choose an option.
z Press the op buttons or turn the 7 dial to
specify the date and time.
z When finished, pess the m button.
Set the local time zone.
z Press the qr buttons or turn the 7 dial to
choose your local time zone.
Finish the setup process.
z Press the m button when finished. After a
confirmation message, the setting screen is
no longer displayed.
z To turn off the camera, press the power
button.
18Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Preparations
• Unless you set the date, time, and local time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
• To set daylight saving time (1 hour ahead), choose
in step 2 and then
choose by pressing the op buttons or turning the 7 dial.
Changing the Date and Time
Adjust the date and time as follows.
Access the camera menu.
z Press the n button.
Choose [Dte/Time].
z Move oom ever to choose the 3 tab.
z s top buttons or turn the 7 dial to
e [Date/Time], and then press the m
butn.
Change the date and time.
z Press the n button to close the menu.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a charged
even if the camera is left off.
• Once the date/time battery is depleted, the [Date/Time] screen will be displayed
Download from Www.Somanuals.com. All Manuals Search And Download1. 9
Initial Preparations
Display Language
The display language can be changed as needed.
Enter Playback mode.
z Press the 1 button.
Access the setting screen.
z Press and hold the m button, and then
immediately press the n button.
Set the display language.
z Press the opqbuttons or turn the 7 dial
to choose nguge, and then press the m
button.
X Ondiplay language has been set, the
settireen is no longer displayed.
• A clock icon is displayed if you wait too long in step 2 after pressing the m
button before you press the n button. In this case, press the
dismiss the clock icon and repeat step 2.
button to
m
• You can also change the display language by pressing the n button and
choosing [Language ] on the 3 tab.
20Download from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Movies
Trying the Camera Out
Follow these instructions to turn the camera on, shoot still images or movies,
and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes, simply
let the camera determine the subject and shooting conditions.
Turn the camera on.
z Press the power button.
X The startup screen is displayed.
Enter A mode.
z Set the mode dial to A.
z Aim the camea at the subject. As the camera
determs thscene, it will make a slight
clickinise.
X reresenting the scene and image
zation mode are displayed in the upper
right of the screen.
X Frames displayed around any subjects that
are detected indicate that they are in focus.
Compose the shot.
z To zoom in and enlarge the subject, move the
zoom lever toward i (telephoto), and to
zoom away from the subject, move it toward
j (wide angle).
Download from Www.Somanuals.com. All Manuals Search And Download2. 1
Trying the Camera Out
Shoot.
Shooting Still Images
Focus.
z Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
AF Frames
z If [Raise the flasappears on the screen,
move the
swith to raise the flash. It will
fire n soting. If you prefer not to use the
flash it down with your finger, into the
came
Shoot.
z Press the shutter button all the way down.
X As the camera shoots, a shutter sound is
played, and in low-light conditions when you
have raised the flash, it fires automatically.
X Your shot remains displayed on the screen
for about two seconds.
z Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.
22Download from Www.Somanuals.com. All Manuals Search And Download.
Trying the Camera Out
Shooting Movies
Start shooting.
z If the flash is already up, push it down with
your finger, into the camera.
z Press the movie button. The camera beeps
once as recording begins, and [ Rec] is
displayed with the elapsed time.
Elapsed Time
X Black bars displayed on the top and bottom
edges of the screen indicate image areas not
recorded.
z Once recording begins, you can take your
finger off the movie button.
Finish shooting.
z Press the moe button again to stop
shootiThe amera beeps twice as
recordstops.
X ding will stop automatically when the
ry card becomes full.
Download from Www.Somanuals.com. All Manuals Search And Download2. 3
Trying the Camera Out
Viewing
After shooting images or movies, you can view them on the screen as follows.
Enter Playback mode.
z Press the 1 button.
X Your last shot is displayed.
Browse through your images.
z To view the previous image, press the q
button or turn the 7 dial counterclockwise.
To view the next image, press the r button or
turn the 7 dial clockwise.
z Press and hold the qr buttons to browse
through images qickly. Images appear
grainy at ttime
z To access Scroll Display mode, turn the 7
dial rapidly. In this mode, turn the 7 dial to
browse through images.
z To return to single-image display, press the
m button.
z To browse images grouped by shooting date,
press the op buttons in Scroll Display
mode.
z Movies are identified by a
icon. To play
movies, go to step 3.
24Download from Www.Somanuals.com. All Manuals Search And Download.
Trying the Camera Out
Play movies.
z Press the m button to access the movie
control panel, choose (either press the
qr buttons or turn the 7 dial), and then press
the m button again.
X Playback now begins, and after the movie is
finished,
is displayed.
z To adjust the volume, press the op buttons.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
Erasing the Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.
Chooan mage to erase.
z ss tqr buttons or turn the 7 dial to
e an image.
Erase the images.
z Press the a button.
z After [Erase?] is displayed, press the qr
buttons or turn the 7 dial to choose [Erase],
and then press the m button.
X The current image is now erased.
z To cancel erasure, press the qr buttons or
turn the 7 dial to choose [Cancel], and then
press the m button.
Download from Www.Somanuals.com. All Manuals Search And Download2. 5
Included Software, PDF Manuals
The software and PDF manuals on the included CD-ROM are introduced
below, with instructions for installation, saving images to a computer, and
using the PDF manuals.
Features of the Included Software
After installing the software on the CD-ROM, you can do the following things
on your computer.
ZoomBrowser EX
ImageBrowser
z Import images and change camera settings
z Manage images: browse, search, and
organize
z Print and edit images
Digital Photo Professional
z Browse, proces nd edit RAW images
PDF Manuals
The following PDF manuals are proon the included CD-ROM.
Software Guide
Camera User Guide
Refer to the software guide when using the Once you are familiar with the information
included software. Windows and
Macintosh versions are provided.
in Getting Started, refer to this guide for a
more in-depth understanding of camera
operation.
26Download from Www.Somanuals.com. All Manuals Search And Download.
Included Software, PDF Manuals
System Requirements
The included software can be used on the following computers. Adobe
Reader is required to view the PDF manuals.
Windows
Windows 7 (including SP1)
Operating System Windows Vista SP2
Windows XP SP3
Computers running one of the above operating systems
Computer
(preinstalled), with an included USB port
Pentium 1.3 GHz or higher (still images), Core 2 Duo 2.6 GHz or
higher (movies)
Processor
Windows 7 (64 bit): 2 GB or more
RAM
Windows 7 (32 bit), Windows Vista (64 bit, 32 bit),
Windows XP: 1 GB or more (still images), 2 GB or more (movies)
Interfaces
USB
Free Hard Disk
Space
620 MB or more*
1024 x 768 resr hher
Display
* In Windows XP, Microsoft .ET Framework 3.0 or later (max. 500 MB) must be installed.
Installation may take some tme, epending on computer performance.
Macintosh
Operating System Mac OS X 10.5 – 10.6
Computers running one of the above operating systems
Computer
(preinstalled), with an included USB port
Processor
RAM
Intel Processor (still images), Core 2 Duo 2.6 GHz or higher (movies)
1 GB or more (still images), 2 GB or more (movies)
USB
Interfaces
Free Hard Disk
Space
680 MB or more
Display
1024 x 768 resolution or higher
• Check the Canon website for the latest system requirements, including
supported OS versions.
Download from Www.Somanuals.com. All Manuals Search And Download2. 7
Included Software, PDF Manuals
Installing the Software and PDF Manuals
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
Insert the CD-ROM in the
computer’s CD-ROM drive.
z Insert the included CD-ROM (DIGITAL
computer’s CD-ROM drive.
z On a Macintosh computer, after inserting the
disc, double-click the desktop disc icon to
open it, and then double-click the
displayed.
icon
Install the files.
z In Windows, click Easy Installation], or on a
Macintosh mpuer, click [Install]. Follow the
on-screen ructions to complete the
inson rocess.
z If thr Account Control] window is
displayed in Windows, follow the on-screen
instructions.
Complete the installation.
z In Windows, click [Restart] or [Finish] and
remove the CD-ROM after the desktop is
displayed.
z On a Macintosh computer, click [Finish] on
the screen after installation and remove the
CD-ROM when the desktop is displayed.
28Download from Www.Somanuals.com. All Manuals Search And Download.
Included Software, PDF Manuals
Saving Images to a Computer
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
Connect the camera to the
computer.
z Make sure the camera is off.
z Open the cover ( ). With the smaller plug of
orientation shown, insert the plug fully into
the camera terminal ( ).
z Insert the larger plug of the interface cable in
the computer’s USB port. For details about
USB connections on the computer, refer to
the computer user manual.
Turn camera on to access
eraWindow.
z the 1 button to turn the camera on.
z On a Macintosh computer, CameraWindow is
displayed when a connection is established
between the camera and computer.
z For Windows, follow the steps introduced
below.
z In the screen that displays, click the
link
to modify the program.
Download from Www.Somanuals.com. All Manuals Search And Download2. 9
Included Software, PDF Manuals
z Choose [Downloads Images From Canon
Camera using Canon CameraWindow] and
then click [OK].
z Double click
.
CameraWindow
Save the imaes to the computer.
z Click [ImpoImas from Camera], and then
click [Impntransferred Images].
X Imare now saved to the Pictures folder
on tmputer, in separate folders named
by date.
z Afer images are saved, close
CameraWindow, press the 1 button to turn
the camera off, and unplug the cable.
z For instructions on viewing images on a
computer, refer to the Software Guide.
30Download from Www.Somanuals.com. All Manuals Search And Download.
Included Software, PDF Manuals
• In Windows 7, if the screen in step 2 is not displayed, click the
taskbar.
icon in the
• To start CameraWindow in Windows Vista or XP, click [Downloads Images
From Canon Camera using Canon CameraWindow] on the screen displayed
when you turn the camera on in step 2. If CameraWindow is not displayed, click
the [Start] menu and choose [All Programs] X [Canon Utilities] X
[CameraWindow] X [CameraWindow].
• On a Macintosh computer, if CameraWindow is not displayed after step 2, click
the [CameraWindow] icon in the Dock (the bar at the bottom of the desktop).
• Although you can save images to a computer simply by connecting your camera
to the computer without using the included software, the following limitations
apply.
- It may take a few minutes after you connect the camera to the computer until
camera images are accessible.
- Images shot in vertical orientation may be saved in horizontal orientation.
- RAW images (or JPEG images recorded with RAW images) may not be
saved.
- Image protection settings may be cleared from images saved to a computer.
- Some problems may occur when saving images or image information,
depending on the operating system versinthe software in use, or image file
sizes.
- Some functions provided by the ind software may not be available, such
as editing movies or returageto the camera.
Using the PDF Manuals
You can access the PDF manuals by double-clicking the desktop shortcut
icons created when the included CD-ROM is used for installation.
Adobe Reader is required to view the PDF manuals.
Download from Www.Somanuals.com. All Manuals Search And Download3. 1
Accessories
Included
Accessories
Battery Charger
CB-2LC/
CB-2LCE*
DIGITAL
CAMERA
Solution Disk
Lens Cap
(with cord)
Battery Pack
NB-10L*
(with terminal cover)
1
Neck Strap
NS-DC9
1
1
Interface Cable IFC-400PCU*
Power
Windows/
Memory Card
Card Reader
Macintosh
Computer
Cs
AC Adapter Kit
ACK-DC80
HDCable HTC-100
TV/Video
System
Stereo AV Cable AVC-DC400ST
*1Also available for purchase separately.
*2Speedlite Transmitter ST-E2, Speedlite Bracket SB-E2 and Off-Camera Shoe Cord
OC-E3 are also supported.
*3Bracket BKT-DC1, Off-Camera Shoe Cord OC-E3, Macrolite Adapter MLA-DC1 are
required to attach these accessories.
*4Macrolite Adapter MLA-DC1 is required to attach this accessory.
*5Requires Waterproof Case Weight WW-DC1.
*6Filter Adapter FA-DC58C is required to attach this accessory.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
32Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Flash Units
2
Speedlite*
Macro Ring Lite
MR-14EX*
Macro Twin Lite
MT-24EX*
580EX II, 430EX II,
320EX, 270EX II
4
3
Cases
Waterproof Case
WP-DC44 *
Soft Case
SC-DC75
5
Lens Accessories
Canon-brand Lens Filter
Lens Hood
LH-DC70
6
(58 mm dia.)*
Canon Pie-Compatible Printers
Other Accessories
Remote Switch RS60-E3
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents such as fire,
etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/
or explosion of a battery pack). Please note that this warranty does not apply to repairs
arising out of the malfunction of non-genuine Canon accessories, although you may
request such repairs on a chargeable basis.
Download from Www.Somanuals.com. All Manuals Search And Download3. 3
Accessories
34Download from Www.Somanuals.com. All Manuals Search And Download.
On/Off
Shooting Mode
z Press the power button to turn the camera on
and prepare for shooting.
z To turn the camera off, press the power
button again.
Playback Mode
z Press the 1 button to turn the camera on
and view your shots.
z To turn the camera off, press the 1 button
again.
• To switch to Playback mode from Shooting mode, press the 1 button.
• To switch to Shooting mode from Playback mode, press the shutter button
• The lens will be retracted after about one minute once the camera is in Playback
mode. You can turn the camera off when the lenis retracted by pressing the
1 button.
Power-Saving Featu(Auto Power Down)
As a way to conserve batterpowercamera automatically deactivates
the screen and then turns itslf off after a specific period of inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of inactivity.
In about two more minutes, the lens is retracted and the camera turns itself
off. To activate the screen and prepare for shooting when the screen is off but
Power Saving in Playback Mode
The camera turns itself off automatically after about five minutes of inactivity.
36Download from Www.Somanuals.com. All Manuals Search And Download.
Shutter Button
To ensure your shots are in focus, always press the shutter button lightly
(halfway) initially. Once the subject is in focus, press the button all the way
down to shoot.
In this manual, shutter button operations are described as pressing the button
halfway or all the way down.
Press halfway. (Press lightly to
focus.)
z Press the shutter button halfway. The camera
beeps twice, and AF frames are displayed
around image areas in focus.
Press all the way down. (From the
halfway position, press fully to
shoot.)
X The camera soots, as a shutter sound is
playe
z p thcamera still until the shutter sound
• Images may be ouof focus if you shoot without initially pressing the
shutter button halfway.
• Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
Download from Www.Somanuals.com. All Manuals Search And Download3. 7
Optical Viewfinder
To conserve battery power when shooting, you can use the optical viewfinder
instead of the screen. Shoot the same way as when using the screen.
Deactivate the screen.
z Press the p button to turn the screen off
Adjust the diopter.
z As you look through the optical viewfinder,
turn the dial one way or the other so that
images look sharp.
• The area visible in the optical viewfinder may differ slightly from the
image area in your shots.
• At aspect ratios other than 4:3, the area visible in the optical
viewfinder differs from the image area in your shots. Check the
settings before shooting.
• The lens may be partially visible througoptical viewfinder at some zoom
positions.
• Although the camera automaticses on subjects, face detection and
focusing is not possible.
38Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Modes
Use the mode dial to access each shooting mode.
Auto Mode
Fully automatic shooting, with
camera-determined settings (pp. 21, 44).
P, Tv, Av, M, C1, and
C2 Modes
Scene Mode
Shoot with optimal settings for specific
Take a variety of shots
using your preferred
Movie Mode
You can also shoot movies when the
mode dial is not set to Movie mode,
simply by pressing the movie button.
Creative Filters Mode
Add a variety of effects to images
when shooting (p. 71).
Shooting Display Options
Press the p button to view other information n the screen, or to hide the
No information is displayed
Display 1
Information is
displayed
Off
Display 2
• Even if the screen is off, it will turn on when you start shooting a
movie.
• Screen brightness is automatically increased by the night display function when
you are shooting under low light, making it easier to check how shots are
composed. However, on-screen image brightness may not match the
brightness of your shots. Note that any on-screen image distortion or jerky
subject motion will not affect recorded images.
Download from Www.Somanuals.com. All Manuals Search And Download3. 9
FUNC. Menu
Configure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
Access the FUNC. menu.
z Press the m button.
Choose a menu item.
z Press the op buttons to choose a menu
item.
X Available options are shown at the bottom of
the screen.
z In some menu items, functions can be
specified simply y pressing the m or r
button, or anothescreen is displayed for
Options
configurie funtion.
Menu Items
Chan option.
z Press the qr buttons or turn the 7 dial to
choose an option.
z Options labeled with a
icon can be
configured by pressing the n button.
Finish the setup process.
z Press the m button.
X The screen before you pressed the m button
in step 1 is displayed again, showing the
option you configured.
• To undo any accidental setting changes, you can restore the camera’s default
40Download from Www.Somanuals.com. All Manuals Search And Download.
n Menu
Configure a variety of camera functions through other menus as follows. Menu
items are grouped by purpose on tabs, such as shooting (4), playback (1),
and so on. Note that available settings vary depending on the selected shooting
Access the menu.
z Press the n button.
Choose a tab.
z Move the zoom lever or press the qr buttons
to choose a tab.
Choose a setting.
z Press the op buttons or turn the 7 dial to
choose a settg.
z To choose sengs with options not shown,
first prhe m or r button to switch
ensand then either press the op
s or turn the 7 dial to select the
seg.
z Press the n button to restore the
previous screen.
Choose an option.
z Press the qr buttons to choose an option.
Finish the setup process.
z
Press the
displayed before you pressed the
button in step 1.
n
button to return to the screen
n
• To undo any accidental setting changes, you can restore the camera’s default
Download from Www.Somanuals.com. All Manuals Search And Download4. 1
Indicator Display
blink depending on the camera’s status.
Indicator
Status
Indicator
Color
Camera Status
On
Camera on
Power Lamp
Green
Blinking Low battery
On
Ready to shoot (when the flash is deactivated)
Recording/reading/transmitting images
Green
the flash is deactivated) (p. 217)
Indicator
On
Ready to shoot (when the flash is activated)
Orange
the flash is activated) (p. 217)
Blinking
• When the indicator blinks green, never urthe camera off, open the
memory card/battery cover, or shor jolthe camera, which may
corrupt images or damage the camor memory card.
Clock
You can check the current time.
z Press and hold the m button.
X The current time appears.
z If you hold the camera vertically while using
the clock function, it will switch to vertical
display. Press the qr buttons or turn the 7
dial to change the display color.
z
Press the
display.
m
button again to cancel the clock
• When the camera is off, press and hold the
button to display the clock.
button, then press the power
m
42Download from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Movies
Shooting in Smart Auto Mode
For fully automatic selection at optimal settings for specific scenes, simply let
the camera determine the subject and shooting conditions.
Turn the camera on.
z Press the power button.
X The startup screen is displayed.
Enter A mode.
z Set the mode dial to A.
z Aim the camera at the subject. The camera
will make a slight clicking noise as it
determines the scene.
X Icons representing the scene and image
stabilization mode are displayed in the upper
X Frames dayed around any detected
subjects iate that they are in focus.
Compose the shot.
z To zoom in and enlarge the subject, move the
zoom lever toward i (telephoto), and to
zoom away from the subject, move it toward
j (wide angle). (A zoom bar showing the
zoom position is displayed.)
Zoom Bar
Focus Range (approx.)
Shoot.
Shooting Still Images
Focus.
z
Press the shutter button halfway. The camera
beeps twice after focusing, and AF frames are
displayed to indicate image areas in focus.
44Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Smart Auto Mode
z Several AF frames are displayed when
multiple areas are in focus.
AF Frames
z If [Raise the flash] appears on the screen,
move the
switch to raise the flash. It will
fire when shooting. If you prefer not to use the
flash, push it down with your finger, into the
camera.
Shoot.
z Press the shuer button all the way down.
X As thmera shoots, a shutter sound is
pyednd in low-light conditions when you
aised the flash, it fires automatically.
X Yhot remains displayed on the screen
for about two seconds.
z Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.
Shooting Movies
Start shooting.
z If the flash is already up, push it down with
your finger, into the camera.
z Press the movie button. The camera beeps
once as recording begins, and [ Rec] is
displayed with the elapsed time.
Elapsed Time
X Black bars displayed on the top and bottom
edges of the screen indicate image areas not
recorded.
z Once recording begins, you can take your
finger off the movie button.
Download from Www.Somanuals.com. All Manuals Search And Download4. 5
Shooting in Smart Auto Mode
Resize the subject and
recompose the shot as needed.
z To resize the subject, do the same thing as in
step 3 on p. 44.
However, note that the sound of camera
operations will be recorded.
z When you recompose shots, the focus,
brightness, and colors will be automatically
adjusted.
Finish shooting.
z Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
z Recording will stop automatically when the
memory card becmes full.
Still Images/Movies
• To activate the screen when mera is on but the screen is blank,
• To restore camera sond iyou have accidentally deactivated it (by
holding the p button down while turning the camera on), press the
n button and choose [Mute] on the 3 tab, and then press the
qr buttons to choose [Off].
Still Images
• A flashing
icon warns that images are more likely to be blurred
by camera shake. In this case, attach the camera to a tripod or take
other measures to keep it still.
• If your shots are dark despite the flash firing, move closer to the
subject. For details on the flash range, see “Specifications” in the
Getting Started guide.
• The subject may be too close if the camera only beeps once when you
press the shutter button halfway. For details on the focusing range
(shooting range), see “Specifications” in the Getting Started guide.
• To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
46Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Smart Auto Mode
• A blinking h icon displayed when you attempt to shoot indicates that
shooting is not possible until the flash has finished recharging.
Shooting can resume as soon as the flash is ready, so either press
the shutter button all the way down and wait, or release it and press
it again.
• The flash firing during shots indicates that the camera has automatically
attempted to ensure optimal colors in the main subject and background (Multi-
area White Balance).
Movies
Microphone
• Before shooting a movie, lower the flash
with your finger. Be careful not to touch
the microphone when shooting a movie.
Leaving the flash raised, or blocking the
microphone may prevent audio from
being recoded or may cause the
recng tsound muffled.
• Avoid touching camera ls ther than the movie button when
shooting movies, becaunds made by the camera will be
recorded.
• To correct suboptimal image color that may occur in
movie
to stop recording, and then press it again to resume recording.
• Audio is recorded in stereo.
Download from Www.Somanuals.com. All Manuals Search And Download4. 7
Shooting in Smart Auto Mode
Scene Icons
In A mode, shooting scenes determined by the camera are indicated by
the icon displayed, and corresponding settings are automatically selected for
optimal focusing, subject brightness, and color.
People
Other Subjects
Subject
Icon
Background
Color
In
Shadows
on Face*
In
At Close
1
1
1
Motion*
Motion*
Range
Background
Bright
Backlit
Gray
—
—
With Blue
Sky
Light Blue
Orange
Backlit
Sunsets
Spotlights
Dark
—
—
Dark Blue
Tripod
Used
*2
*2
—
—
*1Not displayed for movies.
*2Displayed in dark scenes when the camera is held still, as when mounted on a tripod.
actual shooting conditions, or if it is not possible to shoot with your
expected effect, color, or brightness.
48Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Smart Auto Mode
Image Stabilization Icons
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS). Additionally, the following icons are displayed in A
mode.
Image stabilization for movies,
Image stabilization for still
images
reducing strong camera shake,
as when shooting while walking
(Dynamic IS)
Image stabilization for subtle
camera shake, such as when
shooting movies at telephoto
(Powered IS)
Image stabilization for still
images, when panning*
No image stabilization, because
the camera is mounted on a
tripod or held still by other means
Image stabilization for macro
shots (Hybrid IS)
* Displayed when you pan, following moving bjectwith the camera. When you follow
subjects moving horizontally, image stabin only counteracts vertical camera
shake, and horizontal stabilization s. Slarly, when you follow subjects moving
vertically, image stabilization only acthorizontal camera shake.
icon is not displayed.
Download from Www.Somanuals.com. All Manuals Search And Download4. 9
Shooting in Smart Auto Mode
On-Screen Frames
A variety of frames are displayed once the camera detects subjects you are
aiming the camera at.
•
•
A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are
displayed around other detected faces. Frames follow moving subjects
within a certain range to keep them in focus.
However, if the camera detects subject movement, only the white frame
will remain on the screen.
When you are pressing the shutter button halfway and the camera detects
subject movement, a blue frame is displayed, and the focus and image
brightness are constantly adjusted (Servo AF).
are not displayed around desired subjects, or if frames are displayed
on the background or similar areas.
50Download from Www.Somanuals.com. All Manuals Search And Download.
Common, Convenient Features
Still Images
Movies
Zooming In Closer on Subjects (Digital Zoom)
When distant subjects are too far away to enlarge using the optical zoom, use
digital zoom for up to about 16x enlargement.
Move the zoom lever toward i.
z Hold the lever until zooming stops.
X Zooming stops at the largest possible zoom
factor (before the image becomes grainy),
which is displayed when you release the
zoom lever.
Zoom Factor
Move the zoom lever toward i
again.
X The camera zoms in even closer on the
subject, using igital zoom.
• Zoomed images may look grainy, under some resolution settings
blue.
• Focal length when optical and digital zoom are combined is as follows (35mm
film equivalent).
28 – 448 mm (28 – 112 mm with optical zoom alone)
• To deactivate digital zoom, press the n button, choose [Digital Zoom] on
the 4 tab, and then choose [Off].
Download from Www.Somanuals.com. All Manuals Search And Download5. 1
Common, Convenient Features
Still Images
Movies
Using the Self-Timer
With the self-timer, you can include yourself in group photos or other timed
shots. The camera will shoot about 10 seconds after you press the shutter
button.
Configure the setting.
z Press the m button, choose
in the menu,
X Once the setting is complete, ] is displayed.
Sh
z FoStill Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
z For Movies: Press the movie button.
X Once you start the self-timer, the lamp will
blink and the camera will play a self-timer
sound.
X Two seconds before the shot, the blinking
and sound will speed up. (When the flash
fires, the lamp will remain lit.)
z To cancel shooting after you have triggered
the self-timer, press the n button.
z To restore the original setting, choose
in
step 1.
52Download from Www.Somanuals.com. All Manuals Search And Download.
Common, Convenient Features
Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about two seconds after you have
pressed the shutter button. If the camera is unsteady while you are pressing
the shutter button, it will not affect your shot.
Configure the setting.
X Once the setting is complete, [ is displayed.
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
Choose $
thn button.
Cfigure the setting.
z Turn the z dial to choose [Delay], either
press the qr buttons or turn the 7 dial to
choose [Shots], and then press the m
button.
X Once the setting is complete, $ is displayed.
• For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
• When you specify multiple shots, image brightness and white balance are
determined by the first shot. More time is required between shots when the flash
fires or when you have specified to take many shots. Shooting will stop
automatically when the memory card becomes full.
• When a delay longer than two seconds is specified, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (When the flash fires,
the lamp will remain lit.)
Download from Www.Somanuals.com. All Manuals Search And Download5. 3
Common, Convenient Features
Still Images
Adding the Shooting Date and Time
The camera can add the shooting date and time to images in the lower-right
corner. However, note that these cannot be removed. Confirm beforehand
Configure the setting.
z Press the n button, choose [Date
Stamp] on the 4 tab, and then choose the
X Once the setting is complete, [DATE] is
displayed.
Sh
X As you take shots, the camera adds the
shooting date or time to the lower-right corner
of images.
z To restore the original setting, choose [Off] in
step 1.
• Images originally recorded without the date and time can be printed with this
information as follows. However, adding the date and time to images that
already have this information may cause it to be printed twice.
- Use the included software to print
For details, refer to the Software Guide.
54Download from Www.Somanuals.com. All Manuals Search And Download.
Common, Convenient Features
Still Images
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
Specify Tracking AF.
z Press the o button.
X
is displayed in the center of the screen.
Choose a subject to focus on.
z Aim the camera so that
is on the desired
subject, and then press the shutter button
halfway.
X A blue frame is displayed, and the camera will
keep the subjct in focus and image
brightadjsted (Servo AF).
oot
z the shutter button all the way down to
shoot.
z Press the o button to cancel Tracking AF.
• Tracking may not be possible when subjects are too small or move too rapidly,
or when subject color or brightness matches that of the background too closely.
Download from Www.Somanuals.com. All Manuals Search And Download5. 5
Image Customization Features
Still Images
Changing the Aspect Ratio
Change the image aspect ratio (ratio of width to height) as follows.
Configure the setting.
z Press the m button, choose
in the menu,
X Once the setting is complete, the screen
aspect ratio will be updated.
z To restore the original setting, repeat this
process but choose
.
Same aspect ratio as HDTVs, used for don wdescreen HDTVs or similar
display devices.
Same aspect ratio as 35 mm fim, printing images at 5 x 7-inch or postcard
sizes.
Native aspect ratio of the camerscreen, used for printing images at 3.5 x 5-inch
or A-series sizes.
Square aspect ratio.
Aspect ratio commonly used for portraits.
• At aspect ratios other than
Zoom] is set to [Off]).
56Download from Www.Somanuals.com. All Manuals Search And Download.
Image Customization Features
Still Images
Changing Image Resolution (Size)
Choose from 4 levels of image resolution, as follows. For guidelines on how
many shots at each resolution setting can fit on a memory card, see
“Specifications” in the Getting Started guide.
Configure the setting.
z Press the m button, choose
in the menu,
X The option you configured is now displayed.
z To restore the original setting, repeat this
process but choose
.
Guidelines for Choosisolution Based on Paper Size
(for 4:3 Images)
A2 (16.5 x 23.4 in.)
z
: For e-mailing images.
A3 – A5 (11.7 x
16.5 – 5.8 x 8.3 in.)
5 x 7 in.
Postcard
3.5 x 5 in.
Download from Www.Somanuals.com. All Manuals Search And Download5. 7
Image Customization Features
Still Images
Changing the Compression Ratio
(Image Quality)
Choose from two compression ratios, as follows:
(Fine),
(Normal). For
guidelines on how many shots at each compression ratio can fit on a memory
card, see “Specifications” in the Getting Started guide.
Configure the setting.
z Press the m button, choose
in the menu,
press the n button, and choose the
X The option you configured is now displayed.
z To restore the original setting, repeat this
process but choose
.
Still Images
Red-Eye Correction
Red-eye that occurs in the flash photography can be automatically corrected
as follows.
Access the [Built-in Flash
Settings] screen.
z Press the n button, choose [Flash
Control] on the 4 tab, and then press the m
button (p. 41).
58Download from Www.Somanuals.com. All Manuals Search And Download.
Image Customization Features
Configure the setting.
z Choose [Red-Eye Corr.], and then choose
X Once the setting is complete, R is displayed.
z To restore the original setting, repeat this
process but choose [Off].
• Red-eye correction may be applied to image areas other than eyes
(if the camera misinterprets red eye makeup as red pupils, for
example).
• You can also access the screen in step 2 when the flash is up by pressing the
r button and immediately pressing the n button.
Still Images
Correcting Greenish Image Areas from
Mercury Lamps
In shots of evening scenes with cts illuminated by mercury lamps, the
subjects or background ay appear to have a greenish tinge. This greenish
tinge can be corrected automaically when shooting, using Multi-area White
Balance.
Configure the setting.
z Press the n button, choose [Hg Lamp
Corr.] on the 4 tab, and then choose [On]
X Once the setting is complete,
is
displayed.
z To restore the original setting, repeat this
process but choose [Off].
Download from Www.Somanuals.com. All Manuals Search And Download5. 9
Image Customization Features
• After you are finished shooting under mercury lamps, you should set
[Hg Lamp Corr.] back to [Off]. Otherwise, green hues not caused by
mercury lamps may be corrected by mistake.
• Try taking some test shots first, to make sure you obtain the desired results.
Movies
Changing Movie Image Quality
3 image quality settings are available. For guidelines on the maximum movie
length at each level of image quality that will fit on a memory card, see
“Specifications” in the Getting Started guide.
Configure the setting.
z Press the m buttn, choose
in the menu,
X The ion ou configured is now displayed.
z To e the original setting, repeat this
procebut choose
.
60Download from Www.Somanuals.com. All Manuals Search And Download.
Image Customization Features
Details
Image
Quality
Resolution
1920 x 1080
Frame Rate
24 fps
For shooting in Full HD
For shooting in HD
1280 x 720
640 x 480
30 fps
30 fps
For shooting in standard definition
• In
and
modes, black bars displayed on the top and bottom edges of the
screen indicate image areas not recorded.
Movies
Using the Wind Filter
Distorted audio caused by recording when the wind is strong can be reduced.
However, the recording may sound unnatural when this option is used when
there is no wind.
Confire the setting.
z the n button, choose [Wind Filter]
z To restore the original setting, repeat this
process but choose [Off].
Download from Www.Somanuals.com. All Manuals Search And Download6. 1
Helpful Shooting Features
Still Images
Using the Electronic Level
An electronic level can be displayed on the screen when shooting as a
guideline to determine if the camera is level.
Display the electronic level.
z Press the p button several times to display
the electronic level.
Lethe camera as needed.
z Levcamera so that the center of the
electronic level is green.
• If the electronic level is not displayed in step 1, press the n button, and on
the 4 tab, choose [Custom Display]. Add a
electronic level.
to
or
to choose the
• Tilting the camera too far forward or backward will prevent you from using the
electronic level, which will turn gray.
• The electronic level is not displayed during movie recording.
• If you hold the camera vertically, the orientation of the electronic level will be
updated automatically to match the camera orientation.
• If your shots are not level even if you use the electronic level, try calibrating the
electronic level (p. 176).
62Download from Www.Somanuals.com. All Manuals Search And Download.
Helpful Shooting Features
Still Images
Magnifying the Area in Focus
You can check the focus by pressing the shutter button halfway to enlarge the
image area in the AF frame.
Configure the setting.
z Press the n button, choose [AF-Point
Zoom] on the 4 tab, and then choose [On]
ck the focus.
z Pthe shutter button halfway. The face
detected as the main subject is now
magnified.
z To restore the original setting, choose [Off] in
step 1.
• The display will not magnify if a face was not detected, or if the
person is too close to the camera and their face is too large for the
screen.
Download from Www.Somanuals.com. All Manuals Search And Download6. 3
Helpful Shooting Features
Still Images
Checking for Closed Eyes
is displayed when the camera detects that people may have closed their
eyes.
Configure the setting.
z Press the n button, choose [Blink
Detection] on the 4 tab, and then choose
Shoot.
X A frame, accompanied by
, is displayed
when the camera detects a person whose
eyes are closed.
z To restore the oriinal setting, choose [Off] in
step 1.
• When you have specified multips in $ mode, this function is only
available for the final sho.
64Download from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Customizing Camera Operation
Customize shooting functions on the 4 tab of the menu as follows.
Deactivating the AF Assist Beam
You can deactivate the lamp that normally lights up to help you focus when
you press the shutter button halfway in low-light conditions.
Configure the setting.
z Press the n button, choose [AF-assist
Beam] on the 4 tab, and then choose [Off]
z To restore the original setting, repeat this
process but choose [On].
Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduclamp that lights up to reduce red-
eye when the flash is used in lot sots.
Access the [Built-in Flash
Settings] screen.
z Press the n button, choose [Flash
Control] on the 4 tab, and then press the m
Configure the setting.
z Choose [Red-Eye Lamp], and then choose
z To restore the original setting, repeat this
process but choose [On].
Download from Www.Somanuals.com. All Manuals Search And Download6. 5
Customizing Camera Operation
Changing the Image Display Period After Shots
Change how long images are displayed after shots as follows.
Configure the setting.
z Press the n button, choose [Review] on
the 4 tab, and then choose the desired
option (p. 41).
z To restore the original setting, repeat this
process but choose [2 sec.].
2 – 10 sec. Displays images for the specified time.
Displays images until you press the
shutter button halfway.
Hold
Off
No image display after shots.
Changing the Image Disy Style After Shots
Change the way images are displafteshots as follows.
Configure the setting.
z Press the n button, choose [Review
Info] on the 4 tab, and then choose the
z To restore the original setting, repeat this
process but choose [Off].
Off
Displays only the image.
Detailed
Displays shooting details (p. 224).
Shows the area in the AF frame
magnified, enabling you to check the
focus. Follow the steps in “Checking
Focus Check
66Download from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Movies
Specific Scenes
Choose a mode matching the shooting scene, and the camera will
automatically configure the settings for optimal shots.
Enter K mode.
z Set the mode dial to K.
Choose a shooting mode.
z Press the m button, choose
in the menu,
Shoot.
Sill mages
Movies
I Shoot praits (Portrait)
z Tats f people with a softening effect.
Still Images
Movies
JShoot landscapes (Landscape)
z Shoot majestic landscapes with a real sense
of depth.
Still Images
VTake shots of kids and pets
(Kids&Pets)
z Capture subjects that move around, such as
children and pets, without missing photo
opportunities.
z For details on the shooting range, see
“Specifications” in the Getting Started guide.
68Download from Www.Somanuals.com. All Manuals Search And Download.
Specific Scenes
Still Images
Shoot moving subjects (Sports)
z Shoot continuously as the camera keeps the
subject in focus.
z For details on the shooting range, see
“Specifications” in the Getting Started guide.
Still Images
Shoot evening scenes without
using a tripod (Handheld
NightScene)
z Beautiful shots of evening scenes, created by
combining consecutive shots to reduce
camera shake and image noise.
z
When using a ipod, shoot in
A
mode
Still Images
Movies
wSt at the beach (Beach)
z Take shots of brightly lit people on sandy
beaches where the reflected sunlight is
strong.
Still Images
Movies
S Shoot under water (Underwater)
z Natural-colored shots of sea life and
underwater scenery, when you use an
Download from Www.Somanuals.com. All Manuals Search And Download6. 9
Specific Scenes
Still Images
Movies
OTake shots of foliage (Foliage)
z Shoot trees and leaves, such as new growth,
autumn leaves or blossoms, in vivid colors.
Still Images
Movies
P Shoot with snowy backgrounds
(Snow)
z Bright, natural-colored shots of people
against snowy backgrounds.
Still Images
Movies
t Shoot fireworks (Fireworks)
z Vivid shots f fireorks.
• Because the camera ill shoot continuously in
steady while shooting.
• In mode, shooting conditions that cause excessive camera shake
mode, hold it
or similar issues may prevent the camera from combining images,
and you may not be able to obtain the expected results.
• In t mode, mount the camera on a tripod or take other measures to
keep it still and prevent camera shake. In this case, set [IS Mode] to
• In V,
,
, and S modes, shots may look grainy because the ISO speed
(p. 95) is increased to suit the shooting conditions.
70Download from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Image Effects (Creative Filters)
Add a variety of effects to images when shooting.
Movies
Enter
mode.
z Set the mode dial to
.
Choose a shooting mode.
z Press the m button, choose
in the menu,
Shoot.
• In
,
,
,
,
, and
mods, try taking some test shots
first, to make sure you obtain the desid results.
Still Images
Movies
Shoot in vivid colors (Super Vivid)
z Shots in rich, vivid colors.
Still Images
Movies
Posterized shots (Poster Effect)
z Shots that resemble an old poster or
illustration.
Download from Www.Somanuals.com. All Manuals Search And Download7. 1
Image Effects (Creative Filters)
Still Images
Shooting High-Contrast Scenes (High Dynamic
Range)
Three consecutive images are captured at different brightness levels each
time you shoot, and the camera combines image areas with optimal
brightness to create a single image. This mode can reduce the washed-out
highlights and loss of detail in shadows that tends to occur in high-contrast
shots.
Choose
.
.
Hold the camera still.
z Mount the camera on a tripod or take other
measures to keeit still and prevent camera
shake.
Sht.
z Whpress the shutter button all the way
down, he camera will take three shots and
combine them.
• Any subject movement will cause images to look blurry.
• There will be a delay before you can shoot again, as the camera processes and
combines the images.
72Download from Www.Somanuals.com. All Manuals Search And Download.
Image Effects (Creative Filters)
Adding Color Effects
Choose a color effect.
z Press the button, choose a color effect
(either press the qr buttons or turn the 7
dial), and then press the button again.
.
Effect Off
Sepia
—
Sepia tone shots.
B/W
Black and white shots.
Shots in rich, vivid colors.
Super Vivid
Poster Effect
Shots that resemble an od poster or illustration.
Sl Images
Movies
Shooting with FadClors (Nostalgic)
This effect makes colors ook fand images look weathered, as in old
photographs. Choose from five effect levels.
Choose
.
.
Choose an effect level.
z Turn the z dial to choose an effect level.
Shoot.
• Colors will look faded on the shooting screen, but the image aging effect is not
shown. Review the image in Playback mode to see the effect (p. 136).
• The image aging effect is not applied to movies.
Download from Www.Somanuals.com. All Manuals Search And Download7. 3
Image Effects (Creative Filters)
Still Images
Shooting with a Fish-Eye Lens Effect (Fish-eye
Effect)
Shoot with the distorting effect of a fish-eye lens.
Choose
.
.
Choose an effect level.
z Turn the z dial to choose an effect level.
X A preview is shown of how your shot will look
with the effect applied.
Shoot.
Still Images
Movies
Shots Resembling Matre Models (Miniature
Effect)
Creates the effect of a miniaure model, by blurring image areas above and
below your selected area.
You can also make movies that look like scenes in miniature models by
choosing the playback speed before the movie is recorded. People and objects
in the scene will move quickly during playback. Note that sound is not recorded.
Choose
.
X A white frame is displayed, indicating the
image area that will not be blurred.
.
Choose the area to keep in focus.
z Press the
button.
z Move the zoom lever to resize the frame, and
turn the 7 dial to move it.
74Download from Www.Somanuals.com. All Manuals Search And Download.
Image Effects (Creative Filters)
For movies, choose the movie
playback speed.
z Turn the z dial to choose the speed.
Return to the shooting screen and
shoot.
z Press the
button to return to the shooting
screen, and then shoot.
Playback Speed and Estimated Playback Time (for One-
Minute Clips)
Speed
Playback Time
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
• The zoom is not availabn hooting movies. Be sure to set the
zoom before shooing.
• To switch the orientation othe frame to vertical, press the qr buttons in step
2. To return the frame to horizontal orientation, press the op buttons.
• To move the frame when it is in horizontal orientation press the op buttons,
and to move the frame when it is in vertical orientation, press the qr buttons.
• Holding the camera vertically will change the orientation of the frame.
• Movie image quality is
at an aspect ratio of
and
at an aspect ratio of
(p. 56). These quality settings cannot be changed.
Download from Www.Somanuals.com. All Manuals Search And Download7. 5
Image Effects (Creative Filters)
Still Images
Shooting with a Toy Camera Effect (Toy
Camera Effect)
This effect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
Choose
.
.
Choose a color tone.
z Turn the z dial to choose a color tone.
X A preview is shown of how your shot will look
with the effect applied.
Shoot.
Standard Shots resemble toy camera images
Warm
Cool
Images have a warmer tonith Standard].
Images have a coolr tone thath [Standard].
76Download from Www.Somanuals.com. All Manuals Search And Download.
Image Effects (Creative Filters)
Still Images
Movies
Shooting in Monochrome
Shoot images in black and white, sepia, or blue and white.
Choose
.
.
Choose a color tone.
z Turn the z dial to choose a color tone.
X A preview is shown of how your shot will look
with the effect applied.
Shoot.
B/W
Black and white shots.
Sepia
Blue
Sepia tone shots.
Blue and white shots.
Download from Www.Somanuals.com. All Manuals Search And Download7. 7
Image Effects (Creative Filters)
Still Images
Movies
Shooting with Color Accent
Choose a single image color to keep and change other colors to black and
white.
Choose T.
Access the setting screen.
z Press the
button.
X The original image and the Color Accent
image are displayed one after another.
X By default, green is the color that will be kept.
Specify the color.
z Position the cenframe over the color to
keep, ann pres the q button.
X Thcifid color is recorded.
Spethe range of colors to keep.
z Prss the op buttons or turn the 7 dial to
adjust the range.
Recorded Color
z To keep only your specified color, choose a
large negative value. To keep colors similar
to your specified color as well, choose a large
positive value.
z Press the
button to return to the shooting
screen.
• Using the flash in this mode may cause unexpected results.
• In some shooting scenes, images may look grainy and colors may
not look as expected.
78Download from Www.Somanuals.com. All Manuals Search And Download.
Image Effects (Creative Filters)
Still Images
Movies
Shooting with Color Swap
You can replace one image color with another before shooting. Note that only
one color can be replaced.
Choose Y.
Access the setting screen.
z Press the
button.
X The originaimage and the Color Swap image
are diyed ne after another.
X By def, green will be replaced with gray.
Specify the color to replace.
z Position the center frame over the color to
replace, and then press the q button.
X The specified color is recorded.
Specify the new color.
z Position the center frame over the new color,
and then press the r button.
X The specified color is recorded.
Specify the range of colors to
replace.
z Press the op buttons or turn the 7 dial to
adjust the range.
Download from Www.Somanuals.com. All Manuals Search And Download7. 9
Image Effects (Creative Filters)
z To replace only your specified color, choose
a large negative value. To replace colors
similar to your specified color as well, choose
a large positive value.
z
Press the
screen.
button to return to the shooting
• Using the flash in this mode may cause unexpected results.
• In some shooting scenes, images may look grainy and colors may
not look as expected.
80Download from Www.Somanuals.com. All Manuals Search And Download.
Special Modes for Other Purposes
Still Images
Movies
Auto Clip Recording (Movie Digest)
You can make a short movie of a day just by shooting still images.
Before each shot, the camera will automatically record a movie clip of the
scene. Each clip recorded that day is combined into a single file.
Choose
.
.
Shoot.
z To shoot a still image, press the shutter
button all the way down.
X Before shooting, the camera will
automatically record a clip about 2 – 4
seconds long
• Clips may not be recorded if yooot a till image immediately after
turning the camera on, csing
in other ways.
mode, or operating the camera
• Battery life is shoer in thiode than in A mode, because clips
are recorded for ech sot.
• Any sounds from camera operations during movie recording will be
included in the movie.
•
mode movie quality is
• Clips are saved as separate movie files in the following cases even if they were
recorded on the same day in mode.
and cannot be changed.
- If the movie file size reaches about 4 GB or the total recording time reaches
approx. 1 hour
• Some camera sounds will be muted. Sounds are not played when you press the
shutter button halfway, use camera controls, or trigger the self-timer (p. 169).
• Movies created in
mode can be viewed by date (p. 143).
Download from Www.Somanuals.com. All Manuals Search And Download8. 1
Special Modes for Other Purposes
Still Images
Auto Shooting After Face Detection (Smart
Shutter)
Auto Shooting After Smile Detection
The camera shoots automatically after detecting a smile, even without you
pressing the shutter button.
Choose
.
and then press the button.
z Press the qr buttons or turn the 7 dial to
choose , and then press the button.
X The camera now enters shooting standby
,
mode, and [Smile Detection on] is displayed.
Aim the mera at a person.
z Eame e camera detects a smile, it will
shor the lamp lights up.
z To pae smile detection, press the p
buton. Press the p button again to resume
detection.
• Switch to another mode when you finish shooting, or the camera will
continue shooting each time a smile is detected.
• You can also shoot as usual by pressing the shutter button.
• The camera can detect smiles more easily when subjects face the camera and
open their mouth wide enough so that teeth are visible.
• To change the number of shots, press the op buttons after choosing
in
82Download from Www.Somanuals.com. All Manuals Search And Download.
Special Modes for Other Purposes
Using the Wink Self-Timer
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
Choose
.
and then press the button.
z Press the qr buttons or turn the 7 dial to
choose , and then press the button.
,
Compose the shot and press the
shutter button halfway.
z Make sure a green frame is displayed around
the face of the person who will wink.
Press the shutter button all the way
down
X caera now enters shooting standby
and [Wink to take picture] is displayed.
X Tmp blinks and the self-timer sound is
played.
Face the camera and wink.
X The camera will shoot about two seconds
after detecting a wink by the person whose
face is inside the frame.
z To cancel shooting after you have triggered
the self-timer, press the n button.
• If the wink is not detected, wink again slowly and deliberately.
• Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
• Closing and opening both eyes at once will also be detected as a wink.
• If winking is not detected, the camera will shoot about 15 seconds later.
• To change the number of shots, press the op buttons after choosing
in
• If no one is in the shooting area when the shutter button is pressed all the way
down, the camera will shoot after a person enters the shooting area and winks.
Download from Www.Somanuals.com. All Manuals Search And Download8. 3
Special Modes for Other Purposes
Using the Face Self-Timer
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
Choose
.
and then press the button.
z Press the qr buttons or turn the 7 dial to
choose , and then press the button.
,
Compose the shot and press the
shutter button halfway.
z Make sure a green frame is displayed around
the face you focuon and white frames
around other fac.
Press thhutter button all the way
do
X The era now enters shooting standby
mode, and [Look straight at camera to start
count down] is displayed.
X The lamp blinks and the self-timer sound is
played.
Join the subjects in the shooting
area and look at the camera.
X After the camera detects a new face, the
lamp blinking and self-timer sound will speed
up. (When the flash fires, the lamp will remain
lit.) About two seconds later, the camera will
shoot.
z To cancel shooting after you have triggered
the self-timer, press the n button.
• Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
• To change the number of shots, press the op buttons after choosing
in
84Download from Www.Somanuals.com. All Manuals Search And Download.
Special Modes for Other Purposes
Still Images
High-Speed Continuous Shooting (High-speed
Burst HQ)
You can shoot a series of shots in rapid succession by holding the shutter button
all the way down. For details on continuous shooting speed, and maximum
number of continuous shots, see “Continuous Shooting Speed” (see
“Specifications” in the Getting Started guide).
HQ: High Quality
Choose
.
.
Shoot.
X Hold the shutter button all the way down to
shoot continuusly.
z Shooting stopwhen you release the shutter
buttoeach the maximum number of
s, aer which [Busy] is displayed and the
are shown in the order you took them.
• Focus, image brightness, and color are determined by the first shot.
• The screen is blank whle ou are shooting.
• There may be a delay after continuous shooting before you can shoot again.
Additionally, depending on the memory card, there may be a delay before you
can shoot again. Speed Class 6 or higher memory cards are recommended.
• Shooting may slow down depending on shooting conditions, camera settings,
and the zoom position.
Images Displayed During Playback
Each set of images shot continuously is managed as a single group, and only
the first image in that group will be displayed. To indicate that the image is
part of a group,
is displayed in the upper left of the screen.
also erased. Be careful when erasing images.
Download from Www.Somanuals.com. All Manuals Search And Download8. 5
Special Modes for Other Purposes
• Grouped images can be viewed individually when played back using Filtered
ungrouped.
86Download from Www.Somanuals.com. All Manuals Search And Download.
Special Modes for Other Purposes
Still Images
Shooting Stitch Assist Images
Shoot a large subject by taking multiple shots at various positions, and then
use the included software to combine them into a panorama.
Choose x or v.
v.
Take the first shot.
X The first shot will determine the exposure and
white balance.
Take ditional shots.
z pose the second shot so that it partially
ps the image area of first shot.
z Minor misalignment of overlapping portions
will be corrected automatically when the
images are combined.
z Take up to 26 shots, the same way you took
the second shot.
Finish shooting.
z Press the m button.
Use the software to combine the
images.
z For instructions on merging images, refer to
the Software Guide.
• This function is not available when using a TV as a display while shooting
• To use AF lock, assign % to the
button (p. 131).
Download from Www.Somanuals.com. All Manuals Search And Download8. 7
Movies
Shooting Various Movies
Shooting Movies in E Mode
Enter E mode.
z Set the mode dial to E.
Configure the settings to suit the
Shoot.
z Press the movie button.
z To stop movie recording, press the movie
button again.
Locking or Changing Image Brightness Before Shooting
Before shooting, you can lock the exposure or chage it in 1/3-stop increments
within a range of –2 to +2.
Lothe exposure.
z Pre
button to lock the exposure.
The exposure shift bar is displayed.
z To unlock the exposure, press the
again.
button
Adjust the exposure.
z Turn the 7 dial to adjust the exposure, as you
watch the screen.
Shoot.
88Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Various Movies
Shooting iFrame Movies
Shoot movies that can be edited with iFrame-compatible software or devices.
You can quickly edit, save, and manage iFrame movies using the included
software.
Choose
.
z Set the mode dial to E.
z Press the m button, choose E in the menu,
and then choose
X Black bars displayed on the top and bottom
edges of the screen indicate image areas not
recorded.
Shoot.
• The resolution is
• iFrame is a video format developed pple.
Download from Www.Somanuals.com. All Manuals Search And Download8. 9
90Download from Www.Somanuals.com. All Manuals Search And Download.
4
G mode
More discerning shots, in your preferred shooting style
•
Instructions in this chapter apply to the camera with the mode dial set to G
mode.
•
•
G: Program AE; AE: Auto Exposure
Before using a function introduced in this chapter in modes other than G,
Download from Www.Somanuals.com. All Manuals Search And Download9. 1
Still Images
Movies
Shooting in Program AE Mode (G Mode)
You can customize many function settings to suit your preferred shooting
style.
Enter G mode.
z Set the mode dial to G.
Customize the settings as desired
• If adequate exposure cannot be obtained when you press the shutter button
halfway, shutter speeds and aperture values are displayed in orange. To obtain
adequate exposure, try adjusting the following settings.
• Movies can be recorded in G mode as well, by essing the movie button.
However, some H and n settings my e automatically adjusted for
movie recording.
• For details on the shooting range in G msee “Specifications” in the Getting
Started guide.
92Download from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Image Brightness (Exposure Compensation)
Adjusting Image Brightness (Exposure
Compensation)
The standard exposure set by the camera can be adjusted in 1/3-stop
increments, in a range of –3 to +3.
z As you watch the screen, turn the exposure
compensation dial to adjust brightness.
X The correction level you specified is now
displayed.
Locking Image Brightness/Exposure (AE Lock)
Before shooting, you can lock the exposure, or you can specify focus and
exposure separately.
Lock the exposure.
z Aim the camera at the subject to shoot with
the exposure locked, and then press the
button.
X
is displayed, and the exposure is locked.
Compose the shot and shoot.
z After one shot, AE is unlocked and
is no
longer displayed.
• AE: Auto Exposure
• After the exposure is locked, you can adjust the combination of shutter speed
and aperture value by turning the 7 dial (Program Shift).
Download from Www.Somanuals.com. All Manuals Search And Download9. 3
Image Brightness (Exposure Compensation)
Changing the Metering Method
Adjust the metering method (how brightness is measured) to suit shooting
conditions as follows.
z Press the
choose the desired option, and then press
the button again.
button, turn the 7 dial to
X The option you configured is now displayed.
For typical shooting conditions, including backlit shots.
Automatically adjusts exposure to match the shooting conditions.
Evaluative
Determines the average brightness of light across the entire image
area, calculated by treating brightnss in the central area as more
important.
Center
Weighted Avg.
Metering restricted to withe
can also link the Pint frame to the AF frame.
(Spot AE Point frame). You
Spot
Linking the Spot AE Point Frame to the AF Frame
Set the metering method to
.
z Follow the step above to choose
.
Configure the setting.
z Press the n button, choose [Spot AE
Point] on the 4 tab, and then choose [AF
X The Spot AE Point frame will now be linked to
94Download from Www.Somanuals.com. All Manuals Search And Download.
Image Brightness (Exposure Compensation)
Changing the ISO Speed
z Press the o button, choose an option (either
press the qr buttons or turn the 7 dial), and
then press the m button.
X The option you configured is now displayed.
Automatically adjusts the ISO speed to suit the
shooting mode and conditions.
For shooting outdoors in fair weather.
Low
For shooting in cloudy conditions, or at
twilight.
High
For shoting night scenes, or in dark
ooms.
• To view the automatically sspd when the camera is set to
, press
the shutter button halfway.
• Although choosing a ower ISed may reduce image graininess, there may
be a greater risk of sbject lurriness in some shooting conditions.
• Choosing a higher ISO speed will increase shutter speed, which may reduce
subject blurriness and increase the flash range. However, shots may look grainy.
• Press the
button while in the setting screen to set
.
Adjusting the Maximum
ISO Speed
Maximum ISO speed when the camera is set to
range of
can be specified in a
–
.
Access the setting screen.
z Press the n button, choose [ISO Auto
Settings] on the 4 tab, and then press the
Download from Www.Somanuals.com. All Manuals Search And Download9. 5
Image Brightness (Exposure Compensation)
Configure the setting.
z Choose [Max ISO Speed], and then choose
Adjusting
Sensitivity
Choose from three levels of sensitivity for
.
z Follow step 1 in “Adjusting the Maximum
screen.
z Choose [Rate of Change], and then choose
[ISO Auto Settings] screen will
Changing the Noise Reduction Level (High ISO
NR)
You can choose from 3 levels of noise reduction: [Standard], [High], [Low].
This function is especially effective when shooting at high ISO speeds.
Choose a noise reduction level.
z Press the n button, choose [High ISO
NR] in the 4 tab, and then choose the
desired option.
96Download from Www.Somanuals.com. All Manuals Search And Download.
Image Brightness (Exposure Compensation)
Auto Exposure Bracketing (AEB Mode)
Three consecutive images are captured at different exposure levels (standard
exposure, underexposure, and then overexposure) each time you shoot. You
can adjust the amount of underexposure and overexposure (relative to
standard exposure) from –2 to +2 stops in 1/3-stop increments.
Choose
.
z Press the m button, choose
in the menu,
Configure the setting.
z Press the n button, and then adjust the
setting presing the qr buttons or turning
the 7 .
function is treated as the standard exposure level for this function.
• You can also access the setting screen of step 2 by pressing the n button
Download from Www.Somanuals.com. All Manuals Search And Download9. 7
Image Brightness (Exposure Compensation)
Correcting Image Brightness (i-Contrast)
Before shooting, excessively bright or dark image areas (such as faces or
backgrounds) can be detected and automatically adjusted to the optimal
brightness.
To avoid washed-out highlights, specify Dynamic Range Correction. To
preserve image detail in shadows, specify Shadow Correct.
• Under some shooting conditions, correction may be inaccurate or
may cause images to appear grainy.
• You can customize camera operation so that turning the z or 7 dial adjusts
Dynamic Range Correction (DR Correction)
Choose from three correction methods.
z Press the butto, choose
in the menu,
X Onseting is complete, @ is displayed.
• With
and
, the ISO speed will be restored to
if you attempt
if you attempt to set a
if you attempt to set a
to set a speed higher than
.
• With
• With
, the ISO speed will be restored to
speed lower than
.
, the ISO speed will be restored to
speed lower than
.
98Download from Www.Somanuals.com. All Manuals Search And Download.
Image Brightness (Exposure Compensation)
Shadow Correct
z Press the m button, choose
in the menu,
press the n button, and choose
X Once the setting is complete, @ is displayed.
Using the ND Filter
To shoot at slower shutter speeds and smaller aperture values, use the ND
filter, which reduces light intensity to 1/8 the actual level (equivalent to 3
stops).
z Press the m utton, choose
in the menu,
• Mount the camera on a tripod or take other measures to keep it still
and prevent camera shake. In this case, set [IS Mode] to [Off]
(p. 120).
Download from Www.Somanuals.com. All Manuals Search And Download9. 9
Color and Continuous Shooting
Still Images
Movies
Adjusting White Balance
By adjusting white balance (WB), you can make image colors look more
natural for the scene you are shooting.
z Press the m button, choose
in the menu,
X The option you configured is now displayed.
Automatically sets the optimal white balance for the shooting
conditions.
Auto
Day Light
Cloudy
For shooting outdoors in fair weher.
For shooting in cloudy tionsin the shade, or at twilight.
For shooting undiny incandescent (tungsten) lighting
and similarly coorescent lighting.
Tungsten
For shoong under warm-white, cool-white, and similarly colored
fluorescenlighing.
Fluorescent
For shooting under daylight fluorescent and similarly colored
fluorescent lighting.
Fluorescent H
Flash
For shooting with the flash.
h
Sets the optimal white balance for shooting underwater. Tones
down blues to produce natural-looking colors overall.
Underwater
Custom
S
For manually setting a custom white balance (p. 101).
10D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Color and Continuous Shooting
Custom White Balance
For image colors that look natural under the light in your shot, adjust white
balance to suit the light source where you are shooting. Set the white balance
under the same light source that will illuminate your shot.
(p. 100) to choose
or
.
z Aim the camera at a plain white subject, so
that the entire screen is white. Press the
button.
X The tint of the screen changes once the white
balance data has been recorded.
• Colors may look unnatural if you change camera settings after
recording white balance data.
Manually Correcting White Blane
You can manually correct white balanThis adjustment can match the
effect of using a commercially ale olor temperature conversion filter or
color-compensating filter
Configure the setting.
(p. 100) to choose the white balance option.
z Turn the z dial to adjust the correction level
for B and A.
Configure advanced settings.
z To configure more advanced settings, press
the n button and turn the z or 7 dial
to adjust the correction level.
z To reset the correction level, press the
button.
z Press the n button to complete the
setting.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d0. 1
Color and Continuous Shooting
• The camera will retain white balance correction levels even if you
switch to another white balance option in step 1, but correction levels
will be reset if you record custom white balance data.
• B: blue; A: amber; M: magenta; G: green
• One level of blue/amber correction is equivalent to about 7 mireds on a color
temperature conversion filter. (Mired: Color temperature unit representing color
temperature conversion filter density)
• You can customize camera operation so that the B and A adjustment screen
Still Images
Movies
Changing Image Color Tones (My Colors)
Change image color tones as desired, such as converting images to sepia or
black and white.
z Press the m buttn, choose
in the menu,
X The ion ou configured is now displayed.
My Colors Off
Vivid
—
Emphasizes contrast and color saturation, making images
sharper.
Tones down contrast and color saturation for subdued
images.
Neutral
Sepia
B/W
Creates sepia tone images.
Creates black and white images.
Combines the effects of Vivid Blue, Vivid Green, and Vivid
Red to produce intense yet natural-looking colors
resembling images on positive film.
Positive Film
Lighter Skin Tone
Darker Skin Tone
Lightens skin tones.
Darkens skin tones.
10D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Color and Continuous Shooting
Emphasizes blues in images. Makes the sky, ocean, and
other blue subjects more vivid.
Vivid Blue
Emphasizes greens in images. Makes mountains, foliage,
and other green subjects more vivid.
Vivid Green
Vivid Red
Emphasizes reds in images. Makes red subjects more
vivid.
Adjust contrast, sharpness, color saturation, and other
qualities as desired (see below).
Custom Color
or
modes.
• With and modes, colors other than people’s skin tone may be
modified. These settings may not produce the expected results with
some skin tones.
Custom Color
Choose the desired level of image contrast, sarpness, color saturation, red,
green, blue, and skin tones in a rang– 5.
ss the setting screen.
Tones (My Colors)” (p. 102) to choose
,
and then press the n button.
Configure the setting.
z Press the op buttons to choose an option,
and then specify the value by pressing the
qr buttons or turning the 7 dial.
z For stronger/more intense effects (or darker
skin tones), adjust the value to the right, and
for weaker/lighter effects (or lighter skin
tones), adjust the value to the left.
z Press the n button to complete the
setting.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d0. 3
Color and Continuous Shooting
Still Images
Continuous Shooting
Hold the shutter button all the way down to shoot continuously.
Configure the setting.
z Press the m button, choose
in the menu,
X The option you configured is now displayed.
Shoot.
X Hold the shutter button all the way down to
shoot continuously.
Mode
Description
Continuous shooting, with the focand exposure determined
when you press the shutter buttoalfway.
Continuous
W
Continuous
Continuous shooting and sing.
Shooting AF [AF Frame] is set nteand cannot be changed.
Continuoushootinh the focus fixed at the position
determinein manual focusing. In t mode, focus is determined
by the first shot.
Continuous
Shooting LV*
is changed to
.
* For details on the continuous shooting speed in each mode, see “Specifications” in the
Getting Started guide.
• Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
• As more shots are taken, shooting may slow down.
• Shooting may slow down if the flash fires.
10D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Shooting Range and Focusing
Still Images
Movies
Shooting at Preset Focal Lengths (Step Zoom)
You can shoot at preset focal lengths of 28 mm, 35 mm, 50 mm, 85 mm, 100
mm or 112 mm (35mm film equivalents). This is convenient when you want
to shoot at the angle of view of those focal lengths.
Assign
Choose a focal length.
z Turn the z dial clockwise until it clicks to
change the focal length from 28 mm to 35
mm. Keep turning the z dial to increase the
focal length, which changes to 50 mm, 85
mm, 100 mm, and 112 mm at each click.
• Step zoom is not available when hootig movies even if you turn the
z dial.
change the zoom facor. Howeturning the z dial counterclockwise will set
the focal length to 11mm
Still Images
Shooting Close-ups (Macro)
To restrict the focus to subjects at close range, set the camera to e. For
details on the focusing range, see “Specifications” in the Getting Started
guide.
z Press the q button, choose e (either press
the qr buttons or turn the 7 dial), and then
press the m button.
X Once the setting is complete, e is displayed.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d0. 5
Shooting Range and Focusing
• If the flash fires, vignetting may occur.
• Be careful to avoid damaging the lens.
• In the yellow bar display area below the zoom bar, e will turn gray
and the camera will not focus.
• To prevent camera shake, try mounting the camera on a tripod and shooting
Still Images
Movies
Shooting in Manual Focus Mode
When focusing is not possible in AF mode, use manual focus. You can
specify the general focal position and then press the shutter button halfway
to have the camera determine the optimal focal position near the position you
specified. For details on the focusing range, see “Specifications” in the
Getting Started guide.
Choose
.
z Preq button, choose
(either press
the quttons or turn the 7 dial), and then
prss the m button.
X
and the MF indicator are displayed.
Specify the general focal position.
z Referring to the on-screen MF indicator bar
(which shows the distance and focal position)
and the magnified display area, turn the 7
dial to specify the general focal position.
Fine-tune the focus.
z Press the shutter button halfway to have the
camera fine-tune the focal position (Safety
MF).
MF Indicator
z You can also fine-tune the focus by pressing
the
button.
10D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Shooting Range and Focusing
• AF frame mode or size cannot be changed while focusing manually
(p. 108). If you want to change the AF frame mode or size, cancel
manual focus mode first.
magnified display will not appear.
• To focus more accurately, try attaching the camera to a tripod to stabilize it.
• To hide the magnified display area, press the n button and set [MF-Point
• To deactivate automatic focus fine-tuning when the shutter button is pressed
halfway, press the n button and set [Safety MF] on the 4 tab to [Off]
Still Images
Movies
Digital Tele-Converter
The focal length of the lens can be increased y approximately 1.5x or 1.9x.
This can reduce camera shake becauhe shtter speed is faster than it
would be if you zoomed (includsindigital zoom) in to the same zoom
factor.
z Press the n button, choose [Digital
Zoom] on the 4 tab, and then choose the
X The view is enlarged and the zoom factor is
displayed on the screen.
or
. In this
case, the zoom factor is shown in blue.
• The digital tele-converter is only available when the aspect ratio is
.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d0. 7
Shooting Range and Focusing
• The respective focal lengths when using [1.5x] and [1.9x] are 42.0 – 168 mm
and 53.2 – 213 mm (35mm film equivalent).
• The shutter speed may be equivalent when you move the zoom lever all the way
toward i for maximum telephoto, and when you zoom in to enlarge the subject
Still Images
Movies
Changing the AF Frame Mode
Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
z Press the n button, choose [AF Frame]
on the 4 tab, and then choose the desired
Still Images
Movies
Face AiAF
•
•
Detects people’s faces, anthesets the focus, exposure (evaluative
metering only), and white balance ( only).
After you aim the camera at the subject, a white frame is displayed around
the person’s face determined by the camera to be the main subject, and up
to two gray frames are displayed around other detected faces.
When the camera detects movement, frames will follow moving subjects,
within a certain range.
•
•
After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
10D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Shooting Range and Focusing
• If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in the
areas in focus when you press the shutter button halfway.
AF frame is displayed in the center of the screen when you press the
shutter button halfway.
• Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
- Faces in profile, at an angle, or partly hidden
• The camera may misinterpret non-human subjects as faces.
• No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Still Images
FlexiZone/Center
One AF frame is displayed. Effective eliabe focusing.
• A yellow AF framis dispwith
if the camera cannot focus
when you press the shutter button halfway. Note that AF-point
Still Images
Recomposing Shots While the Focus is Locked
As long as you keep the shutter button pressed halfway, the focus and
exposure are locked. You can recompose shots as needed before shooting.
This feature is called Focus Lock.
Focus.
z Aim the camera so that the subject is
centered, and then press the shutter button
halfway.
z Confirm that the AF frame displayed around
the subject is green.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d0. 9
Shooting Range and Focusing
Recompose the shot.
z Keeping the shutter button pressed halfway,
move the camera to recompose the shot.
Shoot.
z Press the shutter button all the way down.
Still Images
Moving and Resizing AF Frames (FlexiZone)
When you want to change the position or size of the AF frame, set the AF
Prepare to move the AF frame.
z Press the
button. The AF frame turns
orange.
Move aresie the AF frame.
z Ture 7 dial to move the AF frame, or
preopqr buttons to move it by a
smallmount.
z To return the AF frame to the original position
in the center, keep the
button held down.
z To reduce the AF frame size, press the
n button. Press it again to restore it to
the original size.
Complete the settings.
z Press the
button.
• AF frames are displayed at normal size when you use the digital
11D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Shooting Range and Focusing
Still Images
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
Choose [Tracking AF].
Mode” (p. 108) to choose [Tracking AF].
X
is displayed in the center of the screen.
Choose a subject to focus on.
z Aim the camera so that
subject, and then press the
is on the desired
button.
X When tsubct is detected, the camera
beeps idisplayed. Even if the
ct moves, the camera will continue to
he subject within a certain range.
X If no subject is detected,
z To cancel tracking, press the
again.
is displayed.
button
Shoot.
z Press the shutter button halfway.
changes to a blue
, which follows the
subject as the camera continues to adjust the
z Press the shutter button all the way down to
shoot.
X Even after your shot,
is still displayed and
the camera continues to track the subject.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d1. 1
Shooting Range and Focusing
• [Servo AF] is set to [On] and cannot be changed.
• Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
• [AF-Point Zoom] on the 4 tab is not available.
• e is not available.
• The camera can detect subjects even if you press the shutter button halfway
without pressing the
of the screen.
button. After your shot,
is displayed in the center
Still Images
Shooting with Servo AF
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjst the exposure as long as
you press the shutter button halfway.
Courthe setting.
z Pren button, choose [Servo AF]
Focus.
z The focus and exposure are maintained
where the blue AF frame is displayed while
you are pressing the shutter button halfway.
• Focusing may not be possible in some shooting conditions.
• In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway. In this
case, the focus and exposure are set according to the specified AF
frame mode.
• If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter button,
and then press it halfway again.
• AF lock shooting is not available.
• [AF-Point Zoom] on the 4 tab is not available.
11D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Shooting Range and Focusing
Still Images
Changing the Focus Setting
You can change default camera operation of constantly focusing on subjects
it is aimed at, even when the shutter button is not pressed. Instead, you can
limit camera focusing to the moment you press the shutter button halfway.
z Press the n button, choose [Continuous
AF] on the 4 tab, and then choose [Off]
Helps avoid missing sudden photo
opportunities, because the camera
constantly focuses on subjects until you
On
press the shutter button halfway.
Conserves battery power, because the
camera oes not focus constantly.
Off
Still Images
Choosing a PersoFocus On (Face Select)
You can shoot after chosing a sfic person’s face to focus on.
Set the AF frame to [Face AiAF]
Enter Face Select mode.
z Aim the camera at the person’s face and
press the
X After [Face Select : On] is displayed, a face
frame is displayed around the face
button.
detected as the main subject.
z Even if the subject moves, the face frame
follows the subject within a certain range.
z If a face is not detected,
is not displayed.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d1. 3
Shooting Range and Focusing
Choose the face to focus on.
z To switch the face frame
detected face, press the
to another
button.
z After you have switched the face frame to all
detected faces, [Face Select : Off] is
displayed, and the specified AF frame mode
screen is displayed again.
Shoot.
z Press the shutter button halfway. After the
camera focuses,
changes to
.
z Press the shutter button all the way down to
shoot.
Stages
Movies
Shooting with the AF Lo
The focus can be locked. After yohe focus, the focal position will not
change even when you relese youer from the shutter button.
Lock the focus.
z With the shutter button pressed halfway,
press the q button.
X The focus is now locked, and
and the MF
indicator are displayed.
z To unlock the focus, after you release the
shutter button, press the q button again and
choose
turn the 7 dial).
(either press the qr buttons or
Compose the shot and shoot.
11D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Shooting Range and Focusing
Still Images
Focus Bracketing (Focus-BKT Mode)
Three consecutive images are captured each time you shoot, with the first
one at the focal distance you set manually and the others at farther and
nearer focal positions determined by presets. The distance from your
specified focus can be set in three levels.
Choose
.
z Press the m button, choose
in the menu,
Configure he setting.
z Press n button, and then adjust the
setting pressing the qr buttons or turning
dal.
• You can also access the setting screen in step 2 by choosing
in step 1 on
Download from Www.Somanuals.com. All Manuals Search And Downloa1d1. 5
Still Images
Flash
Activating Flash
You can have the flash fire for each shot. For details on the flash range, see
“Flash Range” (see “Specifications” in the Getting Started guide).
Raise the flash.
z Move the
switch.
Configure the setting.
z Press the r button, choose h (either press
the qr buttons or turn the 7 dial), and then
press the m button.
X Once the setting is complete, h is displayed.
• If the flash is lowered, the setting screen ill not appear even if you
press the r button. Move the
configure the setting.
switch raise the flash, then
Shooting with Slow chro
With this option, the flash fireto increase the brightness of the main subject
(such as people) while the camera shoots at a slow shutter speed to increase
the brightness of the background that is out of the flash range.
For details on the flash range, see “Flash Range” (see “Specifications” in the
Getting Started guide).
Raise the flash.
z Move the
switch.
Configure the setting.
z Press the r button, choose Z (either press
the qr buttons or turn the 7 dial), and then
press the m button.
X Once the setting is complete, Z is displayed.
11D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Flash
Shoot.
z Even after the flash fires, ensure that the
main subject does not move until the shutter
sound is finished playing.
• Mount the camera on a tripod or take other measures to keep it still
and prevent camera shake. In this case, set [IS Mode] to [Off]
(p. 120).
• If the flash is lowered, the setting screen will not appear even if you
press the r button. Move the
configure the setting.
switch to raise the flash, then
Adjusting the Flash Exposure Compensation
exposure from –2 to +2 stops, in 1/3-stop incements.
z Raise lash, press the r button and
ediely turn the z dial to choose the
nsation level, and then press the m
bun.
X Once the setting is complete, X is displayed.
• When there is a risk of overexposure, the camera automatically adjusts the
shutter speed or aperture value during the flash shots to reduce washed-out
highlights and shoot at optimal exposure. However, you can deactivate
automatic adjustment of the shutter speed and aperture value by accessing
• You can also configure the flash exposure compensation by choosing X in the
Comp] in [Flash Control] on the 4 tab.
• You can also access the [Built-in Flash Settings] n screen as follows
(except when an external flash (sold separately) is attached to the camera).
- Press and hold the r button for at least one second.
- When the flash is up, press the r button and immediately press the n
button.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d1. 7
Flash
Shooting with the FE Lock
Raise the flash and set it to h
Lock the flash exposure.
z Aim the camera at the subject to shoot with
the exposure locked, and then press the
button.
X The flash fires, and when
is displayed,
the flash output level is retained.
Compose the shot and shoot.
z After one shot, Fis unlocked and
is no
longer disyed.
• FE: Flash Exposure
Changing the Flash Timing
Change the timing of the flash and shutter release as follows.
Access the setting screen.
z Press the n button, choose [Flash
Control] on the 4 tab, and then press the m
Configure the setting.
z Choose [Shutter Sync.], and then choose the
1st-
The flash fires immediately after the shutter
curtain opens.
2nd-
The flash fires immediately before the
curtain shutter closes.
11D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Shooting RAW Images
RAW images are “raw” (unprocessed) data, recorded with essentially no loss
of image quality from the camera’s internal image processing. Use the included
software to adjust RAW images as desired with minimal loss of image quality.
z Press the m button, choose
in the menu,
Records JPEG images. JPEG images are processed in the camera for optimal
image quality and compressed to reduce file size. However, the compression
process is irreversible, and images cannot be restored to their original,
unprocessed state. Image processing may also cause some loss of image quality.
Records RAW images. RAW images are “rw” unprocessed) data, recorded with
essentially no loss of image quality froe caera’s image processing. The data
cannot be used in this state for viewing inting n a computer. You must first use
the included software (Digital Proessional) to convert images to ordinary
JPEG or TIFF files. Images cajusted with minimal loss of image quality.
For details on resolutin and thber of shots that will fit on a card, see
“Specifications” in the ettinStarted guide.
Records two images, both a RAW image and a JPEG image, for each shot.
The JPEG image can be printed or viewed on a computer without using the
included software.
•
When transferring RAW images (or RAW and JPEG images recorded
are not available.
are always shot at an aspect ratio of
.
•
To erase
from [Erase
images, display the
], [Erase JPEG], or [Erase
image and press
p
+JPEG] to erase the image.
• The file extension for JPEG images is .JPG, and the extension for RAW images
is .CR2.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d1. 9
Other Settings
Still Images
Movies
Changing the IS Mode Settings
Access the setting screen.
z Press the n button, choose [IS Settings]
on the 4 tab, and then press the m button
Configure the setting.
z Choose [IS Mode], and then choose the
Optimal image stabilization for the
Continuous shooting conditions is automatically
Image abilization is active only at the
Shoot Only*
momnof shooting.
Off
ctivats image stabilization.
*The is hanged to [Continuous] for movie
re
• If image stabilization cannoprevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this case,
set [IS Mode] to [Off].
12D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Other Settings
Movies
Deactivating Powered IS
Powered IS reduces slow camera shake that may occur when recording
telephoto movies. However, this option may not produce the expected results
when used for the stronger camera shake that may occur when shooting
while walking or when moving the camera to match subject movement. In this
case, set Powered IS to [Off].
Settings” (p. 120) to access the [IS Settings]
screen.
z Choose [Powered IS], and then choose [Off]
• [Powered IS] settings are not applied hen [IS Mode] is set to [Off].
Download from Www.Somanuals.com. All Manuals Search And Downloa1d2. 1
12D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Specific Shutter Speeds (Tv Mode)
Set your preferred shutter speed before shooting as follows. The camera
automatically adjusts the aperture value to suit your shutter speed.
For details on available shutter speeds, see “Specifications” in the Getting
Started guide.
Enter M mode.
z Set the mode dial to M.
Set the shutter speed.
z Turn the z dial to set the shutter speed.
• With slow shutter speeds, there will be a delay before you can shoot
again, as the camera processes images to reduce noise.
• When shooting at low shutter speeds on a tripod, you should set [IS
• Maximum shutter speed with the fis 1/2000 second.
If you specify a faster speedcaera will automatically reset the
speed to 1/2000 second beooing.
• Orange display of aprture vals when you press the shutter button
halfway indicates that he settings deviate from standard exposure.
Adjust the shutter speed until the aperture value is displayed in white,
• M: Time value
• You can customize camera operation so that turning the 7 dial changes the
shutter speed (p. 129).
12D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Specific Aperture Values (Av Mode)
Set your preferred aperture value before shooting as follows. The camera
automatically adjusts the shutter speed to suit your aperture value.
For details on available aperture values, see “Specifications” in the Getting
Started guide.
Enter B mode.
z Set the mode dial to B.
Set the aperture value.
z Turn the z dial to set the aperture value.
• Orange display of shutter speeds when you press the shutter button
halfway indicates that the settings deviate from standard exposure.
Adjust the aperture value until the shuttr speed is displayed in white,
or use safety shift (see below).
• B: Aperture value (size of topeg made by the iris in the lens)
• To avoid exposure problemand B modes, you can have the camera
automatically adjust the shued or aperture value, even when standard
exposure cannot othrwise be ained. Press the n button and set
However, safety shift is disabled when the flash fires.
• You can customize camera operation so that turning the 7 dial changes the
aperture value (p. 129).
Download from Www.Somanuals.com. All Manuals Search And Downloa1d2. 5
Still Images
Specific Shutter Speeds and Aperture
Values (M Mode)
Follow these steps before shooting to set your preferred shutter speed and
aperture value to obtain the desired exposure.
For details on available shutter speeds and aperture values, see
“Specifications” in the Getting Started guide.
Enter D mode.
z Set the mode dial to D.
Configure the setting.
z Turn the z dial to set the shutter speed, and
turn the 7 dial to set the aperture value.
X An exposure level mark based on your
specified value is shown on the exposure
level indicator for omparison to the standard
exposure level.
X The expolevemark is shown in orange
whe derence from standard exposure
ex2 stops. “–2” or “+2” is displayed in
orangthe lower right when you press the
shtter button halfway.
Aperture Value
Shutter Speed
Standard
Exposure Level
Exposure Level
Mark
Exposure Level
Indicator
• After you set the shutter speed or aperture value, the exposure level
may change if you adjust the zoom or recompose the shot.
• Screen brightness may change depending on your specified shutter
speed or aperture value. However, screen brightness remains the
same when the flash is up and the mode is set to h.
• To have both the shutter speed and aperture value automatically
adjusted to obtain standard exposure, hold the shutter button halfway
and press the
button. Note that standard exposure may not be
possible with some settings.
12D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Specific Shutter Speeds and Aperture Values (M Mode)
• D: Manual
• Calculation of standard exposure is based on the specified metering method
• You can customize camera operation so that turning the 7 dial changes shutter
Adjusting the Flash Output
Choose from the three flash levels in D mode.
Enter D mode.
z Set the mode dial to D.
Configure the setting.
z Raise the flash, press the r button and
immediately turn the z dial to choose the
flash outpuleel, then press the m button.
X Once setting is complete, X is displayed.
the 4 tab.
choosing [Flash Control] on the 4 tab, and then setting [Flash Mode] to
[Manual].
• You can also access the [Built-in Flash Settings] n screen as follows
(except when an external flash (sold separately) is attached to the camera).
- Press and hold the r button for at least one second.
- When the flash is up, press the r button and immediately press the n
button.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d2. 7
Customization for Shooting Styles
Still Images
Movies
Customizing Display Information
Customize what information is shown in various display modes (switched by
pressing the p button), and whether or not the information is shown on the
LCD monitor or viewfinder.
Access the setting screen.
z Press the n button, choose [Custom
Display] on the 4 tab, and then press the m
Configure the setting.
z Press the opqr buttons or turn the 7 dial
to choose an item, and then press the m
button. Items you choose for display are
labeled with
.
to or de this information in LCD
moviewfinder display modes
(switcd by pressing the p button). Press
thopqr buttons or turn the 7 dial to
choose the screen (
,
, or
), and then
press the m button.
To hide this information in the display mode
(accessed by pressing the p button), add
to the icon. Note that the current display
mode cannot be modified.
X Selected items (labeled with a
) will be
included in display.
Shooting Info
Grid Lines
Displays shooting information (p. 222).
Displays a reference grid.
Electronic Level
Histogram
Displays the electronic level (p. 62).
12D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Customization for Shooting Styles
• Settings will not be saved if you press the shutter button halfway and
return to the shooting screen from the custom display settings
screen.
• Grayed-out items can also be specified, but they may not be
displayed in some shooting modes.
• Grid lines are not recorded in your shots.
Still Images
Movies
Assigning Functions to the Front Dial and
Control Dial
Assign commonly used functions to the front dial and control dial, by shooting
mode.
Accethe setting screen.
z s tn button, choose [Set z7
on the 4 tab, and then press the m
Configure the setting.
z Press the qr buttons to choose an item.
z To configure the settings, press the op
buttons, choose an item (either press the
opqr buttons or turn the 7 dial), and then
turn the z dial to change the function.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d2. 9
Customization for Shooting Styles
Assignable Functions
Functions you can assign to the front dial and control dial vary depending on
shooting mode. On the setting screen, you can assign aspect ratio switching
in the following table.
Shooting Mode
Item
D
B
B
M
M
G
z
7
M
Front Dial 1
Front Dial 2
Control Dial
B,
z
7
B
B
B
M
M
M,
z
7
M, B
• When multiple functions are aso te 7 dial, press the
switch between them.
button to
13D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Customization for Shooting Styles
Still Images
Movies
Assigning Functions to the
Button
Access the setting screen.
z Press the n button, choose [Set Shortcut
button] on the 4 tab, and then press the m
button (p. 41).
Configure the setting.
z Press the opqr buttons or turn the 7 dial
to choose a function to assign, and then
press the m button.
Use the assigned function as
needed.
z Press the
utton to activate the assigned
functi
• To restore default settings,
• Icons labeled with indicahe function is not available in the current
shooting mode or under currenction conditions.
• When the or fnctiois used, each press of the
.
button records white
or
button adjusts and locks
.
• When the % function is used, each press of the
the focus, and % is displayed on the screen.
• Pressing the
button when the
function is used deactivates screen
display. To restore the display, do any of the following.
- Press any button (other than the power button)
- Hold the camera in another orientation
- Open and close the screen
- Raise and lower the flash
Download from Www.Somanuals.com. All Manuals Search And Downloa1d3. 1
Customization for Shooting Styles
Still Images
Saving Shooting Settings
Save commonly used shooting modes and your configured function settings
for reuse. To access saved settings later, simply turn the mode dial to
or
. Even settings that are usually cleared when you switch shooting modes
or turn the camera off (such as self-timer settings) can be retained this way.
Settings that can be saved
•
•
•
•
•
•
Shooting modes (G, M, B, and D)
Shooting menu settings
Zoom positions
Enter a shootng mode with
settingu want to save, and
che te settings as desired.
Conure the setting.
z Press the n button, choose [Save
Settings] on the 4 tab, and then press the
m button.
Save the settings.
z Press the qr buttons or turn the 7 dial to
choose the destination, and then press the
m button.
13D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Customization for Shooting Styles
• To edit saved settings (except their shooting mode), choose
or
, change the settings, and then repeat steps 2 – 3. These setting
details are not applied in other shooting modes.
• To clear information you have saved to
turn the mode dial to or
or
and restore default values,
and choose [Reset All] (p. 179).
Still Images
Movies
Saving Commonly Used Shooting Menus (My
Menu)
Save up to five commonly used shooting menus as menus on the
instant access to all of these items from a single screen.
tab, for
Access the setting screen.
z Press the n button, choose [My Menu
settinn the
tab, and then press the
Configure the setting.
z Press the op buttons or turn the 7 dial to
choose [Select items], and then press the m
button.
z Press the op buttons or turn the 7 dial to
choose menus to save (up to five), and then
press the m button.
X
is displayed.
z To cancel saving, press the m button.
no longer displayed.
is
z Press the n button.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d3. 3
Customization for Shooting Styles
Rearrange the menu list order, as
needed.
z Press the op buttons or turn the 7 dial to
choose [Sort], and then press the m button.
z Press the op buttons or turn the 7 dial to
choose a menu to move, and then press the
m button.
z Press the op buttons or turn the 7 dial to
change the order, and then press the m
button.
z Press the n button.
• Grayed-out items in step 2 can also be specified, but they may not be
available in some shooting modes.
• To make My Menu immediately accessible bprssing the n button in
Shooting mode, choose [Set default viewnd pss the qr buttons to choose
[Yes].
13D4ownload from Www.Somanuals.com. All Manuals Search And Download.
6
Playback Mode
Have fun reviewing your shots, and browse or edit them
in many ways
•
To prepare the camera for tperations, press the 1 button to enter
Playback mode.
• It may not be possible to play back or edit images that were renamed
or already edited on a computer, or images from other cameras.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d3. 5
Still Images
Movies
Viewing
After shooting images or movies, you can view them on the screen as follows.
Enter Playback mode.
z Press the 1 button.
X Your last shot is displayed.
Browse through your images.
z To view the previous image, press the q
button or turn the 7 dial counterclockwise.
To view the next image, press the r button or
turn the 7 dial clockwise.
z Press and hold the qr buttons to browse
through images quickly. Images appear
grainy at this tim
z To s Scroll Display mode, turn the 7
dial rapidly. In this mode, turn the 7 dial to
brwse through images.
z To return to single-image display, press the
m button.
z To browse images grouped by shooting date,
press the op buttons in Scroll Display
mode.
z Movies are identified by a
icon. To
play movies, go to step 3.
13D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Viewing
Play movies.
z To start playback, press the m button to
access the movie control panel, choose
(either press the qr buttons or turn the 7
dial), and then press the m button again.
Adjust the volume.
z Press the op buttons to adjust the volume.
Pause playback.
z To pause playback, press the m button. The
movie control panel is displayed. To resume
playback, press the qr buttons or turn the 7
dial to choose
button.
, and then press the m
X After the movis finished,
is
display.
• To switch to Shooting mode Plaback mode, press the shutter button
halfway.
• To deactivate Scroll Display, the n button, choose [Scroll Display]
on the 1 tab, and thn choose [Off].
• For playback from the lst mage viewed, press the n button, choose
[Resume] on the 1 tab, and then [Last seen].
• To change the transition shown between images, press the n button,
choose [Transition] on the 1 tab, and then press the qr buttons to choose the
effect.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d3. 7
Viewing
Still Images
Movies
Switching Display Modes
Press the p button to view other information on the screen, or to hide the
information. For details on the information displayed, see p. 222.
No information is
displayed
Simple
Information
Display
Detailed
Information
Display
Enables you to check
*Not shown for movies.
• Switching display modes by pressing the p button is also possible immediately
after you shoot, while your shot is displayed. Hoever, simple information
display is not available. To change the initial day mode, press the n
Overexposure Warning (mage Highlights)
Washed-out highlights in the mage fon the screen in detailed information
display.
Histogram
z The graph in detailed information display is a
histogram showing the distribution of
brightness in the image. The horizontal axis
represents the degree of brightness, and the
vertical axis, how much of the image is at
each level of brightness. Viewing the
histogram is a way to check exposure.
z The histogram can also be accessed while
High
Low
Dark
Bright
13D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Viewing
RGB Histogram
z To view an RGB histogram, press the o
button in detailed information display. The
RGB histogram shows the distribution of
shades of red, green, and blue in an image.
The horizontal axis represents R, G, or B
brightness, and the vertical axis, how much of
the image is at that level of brightness.
Viewing this histogram enables you to check
image color characteristics.
RGB Histogram
z Press the o button again to return to detailed
information display.
Still Images
Checking the Focus
To check the focus of your shots, you cn manify the area of the image that
was in the AF frame at the time of shg.
ss Focus Check.
X A white frame is displayed where the AF
frame was when the focus was set.
X Gray frames are displayed over faces
detected later, in Playback mode.
X The portion of the image in the orange frame
is magnified.
Switch frames.
z Move the zoom lever toward k once.
X The screen at left is displayed.
z To switch to a different frame when there are
multiple frames, press the m button.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d3. 9
Viewing
Zoom in or out, or view other image
areas.
z As you examine the focus, use the zoom
lever to zoom in or out. Press the opqr
buttons to adjust the display position.
z Press the n button to restore the original
display in step 1.
14D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Browsing and Filtering Images
Still Images
Movies
Navigating Through Images in an Index
By displaying multiple images in an index, you can quickly find the images you
are looking for.
Display images in an index.
z Move the zoom lever toward g to display
images in an index. Moving the lever again
will increase the number of images shown.
z To display fewer images, move the zoom
lever toward k. Fewer images are shown
each time you move the lever.
Choose an image.
z Turn the 7 dl to scroll through the images.
z Press the oqr buttons to choose an
image
X rane frame is displayed around the
ed image.
z Prs the m button to view the selected
image in single-image display.
Still Images
Movies
Filtering Image Display
To find images on a memory card full of images, you can filter image display,
restricting display to images matching a specific filter. You can also protect
Jump to Favorites
Jump Shot Date
Displays images tagged as favorites (p. 157).
Displays the images shot on a specific date.
Displays the images of a specific category (p. 158).
Jump to My Category
Displays still images, movies, or movies shot in
Jump to Still/Movie
Jump 10 Images
Jump 100 Images
Jumps by 10 images at a time.
Jumps by 100 images at a time.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d4. 1
Browsing and Filtering Images
Filtering Display by
,
,
, or
Choose filter conditions.
z In single-image display, press the d button,
and then press the op buttons to choose a
search filter (jump method).
z When filtering by
,
, or
, press the
qr buttons to choose a filter condition. Turn
the 7 dial to view only those images that
match your filter conditions.
Filter Conditions
z Press the n button to restore single-
image display.
View the filtered images.
z Press the m button to start browsing filtered
images. The jump method and a yellow frame
are displayed.
z To view is filtred by your chosen
con, pess the qr buttons or turn the 7
dia
z Pressig the d button will display [Filtered
plyback settings cleared]. To cancel filtered
playback, press the m button.
• When the camera has found no corresponding images for some
filters, those filters will not be available.
(p. 145). You can protect, erase, or print all filtered images at once by choosing
(p. 160), a message is displayed and filtered playback ends.
14D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Browsing and Filtering Images
Jumping by
or
Images
z Choose a jump method in single-image
display by pressing the d button and then
pressing the op buttons.
z Press the qr buttons to use the specified
jump method.
z Press the n button to restore single-
image display.
Using the Front Dial to Jump
Turn the front dial to jump images using the
,
,
and
functions.
z Choose a jump method in single-image
display by turning the z dial and then
pressing the op buttons.
z Turn the z dal to use the specified jump
metho
• Turning the z dial when brog images in index display will jump to the
previous or next imagaccrding to the jump method chosen in single-image
display. However, if you have chosen
switched to
or
, the jump method will be
.
Movies
Viewing Movie Digest Movies
Movies created in
Choose a movie.
z Press the n button to choose [Movie
Digest Playback] in the 1 tab, then choose a
date.
Play the movie.
z Press the m button to start playback.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d4. 3
Browsing and Filtering Images
Still Images
Viewing Individual Images in a Group
Grouped images shot in
but they can also be viewed individually.
Choose an image group.
z Press the qr buttons or turn the 7 dial to
choose an image labeled
, and then
press the m button.
View individual images in the
group.
z Pressing the qr uttons or turning the 7 dial
will displly imges in the group.
z Preg thd button will display [Display all
imPress m to cancel group playback.
• During group playback (sep 2)you can browse through images quickly
(“Magnifying Images” (p. 145)). You can protect, erase, or print all images in a
group at once by choosing “All Images in Group” in “Protecting Images” (p. 148),
• To ungroup images so that you can view them individually, press the n
However, grouped images cannot be ungrouped during individual playback.
14D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Image Viewing Options
Still Images
Magnifying Images
Magnify an image.
z
Moving the zoom lever toward
k
will zoom in
and magnify the image. You can magnify
images up to about 10x by continuing to hold
the zoom lever.
z To zoom out, move the zoom lever toward
g. You can return to single-image display
by continuing to hold it.
Move the display position and
switch images as needed.
z To move the display position, press the
opqr buttos.
z To swto oter images while zoomed, turn
the 7 .
Approximate Position of
Displayed Area
• You can return to singleimalay from magnified display by pressing the
n button.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d4. 5
Image Viewing Options
Still Images
Movies
Viewing Slideshows
Automatically play back images from a memory card as follows.
Access the setting screen.
z Press the n button and choose
Configure the setting.
z Choose a menu item to configure, and then
Start automatc playback.
z Press the p buttons or turn the 7 dial to
chStat], and then press the m button.
X The show will start a few seconds after
[Loading image...] is displayed.
z Press the n button to stop the
slideshow.
slideshows.
• To pause or resume slideshows, press the m button.
• You can switch to other images during playback by pressing the qr buttons or
turning the 7 dial. For fast-forward or fast-rewind, hold the qr buttons down.
• [Play Time] cannot be modified when [Bubble] is chosen in [Effect].
• You can also start slideshows from single-image display by pressing and
holding the m button and immediately pressing the
button.
14D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Image Viewing Options
Still Images
Auto Playback of Similar Images (Smart
Shuffle)
Based on the current image, the camera offers four images similar to it that
you may wish to view. After you choose to view one of those images, the
camera offers four more images. This is an enjoyable way to play back
images in an unexpected order. Try this feature after you have taken many
shots, in many kinds of scenes.
Choose Smart Shuffle.
z Press the n button, choose [Smart
Shuffle] on the 1 tab, and then press the m
X Four candidate images are displayed.
Chooan image.
z
the opqr buttons to choose the
iyou want to view next.
X Your chosen image is displayed in the center,
surrounded by the next four candidate
images.
z For full-screen display of the center image,
press the m button. To restore the original
display, press the m button again.
z Press the n button to restore single-
image display.
• Only still images shot with this camera are played back using Smart
Shuffle.
• [Smart Shuffle] is not available in the following cases:
- There are less than 50 shots taken with this camera
- An unsupported image is currently displayed
- The current image is being played in filtered playback
Download from Www.Somanuals.com. All Manuals Search And Downloa1d4. 7
Still Images
Movies
Protecting Images
Protect important images to prevent accidental erasure by the camera
(pp. 152).
Choosing a Selection Method
Access the setting screen.
z Press the n button, and then choose
Choose a selection method.
z Choose a menu item and a setting as desired
z To return to the enu screen, press the
n b.
• Protected images on memory card will be erased if you format the
• Protected images cannot be erased by the camera. To erase them, cancel
protection settings first.
14D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Protecting Images
Choosing Images Individually
Choose [Select].
and press the m button.
Choose an image.
z Press the qr buttons or turn the 7 dial to
choose an image, and then press the m
button.
z To cancel protection, press the m button
again. is no longer displayed.
is displayed.
z Repeat this process to specify other images.
Protect the images.
z
Press the
messagis dilayed.
n
button. A confirmation
z Press qr bttons or turn the 7 dial to
se OK], and then press the m button.
• Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d4. 9
Protecting Images
Selecting a Range
Choose [Select Range].
Range] and press the m button.
Choose a starting image.
z Press the m button.
z Press the qr buttons or turn the 7 dial to
choose an image, and then press the m
button.
Choose an ending image.
z Press the r button to choose [Last image],
and then press the m button.
z Press the qr buttons or turn the 7 dial to
choose an image, and then press the m
button.
z Images before the first image cannot be
selected as the last image.
15D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Protecting Images
Protect the images.
z Press the p button to choose [Protect], and
then press the m button.
• You can also choose the first or last image by turning the 7 dial when the top
screen in steps 2 and 3 is displayed.
Specifying All Images at Once
Choose [All Images].
Images] and pess the m button.
Protthe mages.
z s top buttons or turn the 7 dial to
e [Protect], and then press the m
buton.
• To cancel protection for groups of images, choose [Unlock] in step 4 of
“Selecting a Range” or in step 2 of “Specifying All Images at Once”.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d5. 1
Still Images
Movies
Erasing Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.
Choose an image to erase.
z Press the qr buttons or turn the 7 dial to
choose an image.
Erase the images.
z Press the a button.
z After [Erase?] is displayed, press the qr
buttons or turn the 7 dial to choose [Erase],
and then press the m button.
X The current image is now erased.
z To cancel erasure, press the qr buttons or
turn the 7 dial to choose [Cancel], and then
press the m butn.
Erasing All Images
You can erase all images at once. Beful when erasing images, because
erased.
Choosing a Selection Method
Access the setting screen.
z Press the n button, and then choose
Choose a selection method.
z Choose a menu item and a setting as desired
z Press the op buttons to choose a selection
method, and then press the m button.
z To return to the menu screen, press the
n button.
15D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Erasing Images
Choosing Images Individually
Choose [Select].
and press the m button.
Choose an image.
an image,
z To cancel erasure, press the m button
again. is no longer displayed.
is displayed.
z Repeat this process to specify other images.
Erase the images.
z
Press the
message is diplayed.
n
button. A confirmation
z Press the qr uttons or turn the 7 dial to
choosK], and then press the m button.
Selecting a Rang
Choose [Select Range].
Range] and press the m button.
Choose images.
images.
Erase the images.
z Press the p button to choose [Erase], and
then press the m button.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d5. 3
Erasing Images
Specifying All Images at Once
Choose [All Images].
Images] and press the m button.
Erase the images.
z Press the qr buttons or turn the 7 dial to
choose [OK], and then press the m button.
15D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Movies
Rotating Images
Change the orientation of images and save them as follows.
Choose [Rotate].
z Press the n button, and then choose
Rotate the image.
z Press the qr buttons or turn the 7 dial to
choose an image.
z The image is rotated 90° each time you press
the m button.
z To return to the menu screen, press the
n button
• Movies with an image qof
or
cannot be rotated.
• Rotation is not possible wAuto Rotate] is set to [Off] (see below).
Deactivating Auto Rotation
Follow these steps to deactivate automatic rotation by the camera, which
rotates images shot in vertical orientation so they are displayed vertically on
the camera.
z Press the n button, choose [Auto
Rotate] on the 1 tab, and then choose [Off]
Download from Www.Somanuals.com. All Manuals Search And Downloa1d5. 5
Rotating Images
• Images cannot be rotated when you set [Auto Rotate] to [Off].
Additionally, images already rotated will be displayed in the original
orientation.
images shot vertically will be displayed vertically, and rotated images
will be displayed in the rotated orientation.
15D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Still Images
Movies
Image Categories
choosing a category in filtered playback, you can restrict the following
operations to all of those images.
•
Tagging Images as Favorites
Choose [Favorites].
z Press the n button, and then choose
Choose an image.
z Press qr buttons or turn the 7 dial to
ose n image, and then press the m
.
z Ttag the image, press the m button
again. is no longer displayed.
is displayed.
z Repeat this process to choose additional
images.
Finish the setup process.
z
Press the
message is displayed.
n
button. A confirmation
z Press the qr buttons or turn the 7 dial to
choose [OK], and then press the m button.
• Images will not be tagged as favorites if you switch to Shooting mode
or turn the camera off before finishing the setup process in step 3.
• Favorite images will have a three-star rating (
) when transferred
to computers running Windows 7 or Windows Vista. (Does not apply to movies
or RAW images.)
Download from Www.Somanuals.com. All Manuals Search And Downloa1d5. 7
Image Categories
Organizing Images by Category (My Category)
You can organize images into categories. Note that images are automatically
categorized at the time of shooting, according to shooting conditions.
:Images with detected faces, or images shot in I or V mode.
:Images detected as
O, or mode.
: Images shot in
,
, or
in A mode, or images shot in J,
, w, S, P, or t mode.
Choosing a Selection Method
Access the setting screen.
z Press the n button, and then choose
Choose selection method.
z Chmenu item and a setting as desired
z To return to the menu screen, press the
n button.
Choosing Images Individually
Choose [Select].
z Following step 2 above, choose [Select] and
press the m button.
Choose an image.
z Press the qr buttons or turn the 7 dial to
choose an image.
15D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Image Categories
Choose a category.
z Press the op buttons to choose the
category, and then press the m button.
is displayed.
z To cancel selection, press the m button
again.
is no longer displayed.
z Repeat this process to choose additional
images.
Finish the setup process.
z Press the n button. A confirmation
message is displayed. Press the qr buttons
or turn the 7 dial to choose [OK], and then
press the m button.
•
Images will not be assigned to a gory you switch to Shooting mode
or turn the camera off before finig the setup process in step 4.
Selecting a Range
Choose [Select Range].
Range] and press the m button.
Choose images.
Choose a category.
z Press the p button to choose the type of
image, and then press the qr buttons or turn
the 7 dial to choose a category.
Finish the setup process.
z Press the p button to choose [Select], and
then press the m button.
• You can clear the selection of all images in the [Select Range] category by
choosing [Deselect] in step 4.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d5. 9
Still Images
Editing Still Images
card has sufficient free space.
Resizing Images
Save a copy of images at a lower resolution.
Choose [Resize].
z Press the n button, and then choose
Choose an image.
z Press the qr buttons or turn the 7 dial to
choose an image, and then press the m
button.
Choosimge size.
z Pree qr buttons or turn the 7 dial to
choe size, and then press the m
button
X [Sve new image?] is displayed.
Save the new image.
z Press the qr buttons or turn the 7 dial to
choose [OK], and then press the m button.
X The image is now saved as a new file.
Review the new image.
z Press the n button. [Display new
image?] is displayed.
z Press the qr buttons or turn the 7 dial to
choose [Yes], and then press the m button.
X The saved image is now displayed.
16D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
• Editing is not possible for images saved as
• RAW images cannot be edited.
in step 3.
• Images cannot be resized to a higher resolution.
Cropping
You can specify a portion of an image to save as a separate image file.
Choose [Trimming].
z Press the n button, and then choose
Choose an image.
z Press the qr uttons or turn the 7 dial to
choosimage, and then press the m
n.
Cropping Area
st the cropping area.
Resolution After Croppig
X A frame is displayed around the portion of the
image to be cropped.
X The original image is shown in the upper left,
and a preview of the image as cropped is
shown in the lower right.
z To resize the frame, move the zoom lever.
z
To move the frame, press the opqr buttons.
z To change the frame orientation, press the
m button.
Preview of Image
After Cropping
z Faces detected in the image are shown with
gray frames around them (in the upper-left
image), which can be used for cropping.
Switch between frames as needed by turning
the 7 dial.
z Press the n button.
Save as a new image and review.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d6. 1
Editing Still Images
• Editing is not possible for images shot at a resolution of
resized to
• RAW images cannot be edited.
• Images supported for cropping will have the same aspect ratio after cropping.
• Cropped images will have a smaller resolution than uncropped images.
Changing Image Color Tones (My Colors)
You can adjust image colors and then save the edited image as a separate
file. For details on each option, see p. 102.
Choose [My Colors].
z Press the n button, and then choose
Choose imge.
z Prehe r buttons or turn the 7 dial to
chn image, and then press the m
butto
Choose an option.
z Press the qr buttons or turn the 7 dial to
choose an option, and then press the m
button.
Save as a new image and review.
• Image quality of pictures you repeatedly edit this way will be a little
lower each time, and you may not be able to obtain the desired color.
• Colors of RAW images cannot be edited.
• The color of images edited using this function may vary slightly from the color of
images shot using My Colors (p. 102).
16D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
Correcting Image Brightness (i-Contrast)
Excessively dark image areas (such as faces or backgrounds) can be
detected and automatically adjusted to the optimal brightness. Insufficient
overall image contrast is also automatically corrected, to make subjects stand
out better. Choose from four correction levels, and then save the image as a
separate file.
Choose [i-Contrast].
z Press the n button, and then choose [i-
Choose an image.
z Press the qr buttons or turn the 7 dial to
choose an image, and then press the m
button.
Chooan option.
z ss tqr buttons or turn the 7 dial to
e an option, and then press the m
bn.
Save as a new image and review.
• For some images, correction may be inaccurate or may cause
images to appear grainy.
• Images may look grainy after repeated editing using this function.
• RAW images cannot be edited this way.
• If [Auto] does not produce the expected results, try correcting images using
[Low], [Medium], or [High].
Download from Www.Somanuals.com. All Manuals Search And Downloa1d6. 3
Editing Still Images
Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
Choose [Red-Eye Correction].
z Press the n button, and then choose
Choose an image.
z Press the qr buttons or turn the 7 dial to
choose an image.
Correct the image.
z Press the m button.
X Red-eye detecteby the camera is now
corrected, and frmes are displayed around
corrected ge aras.
z Enor duce images as needed. Follow
Save as a new image and review.
z Press the opqr buttons or turn the 7 dial
to choose [New File], and then press the m
button.
X The image is now saved as a new file.
• Some images may not be corrected accurately.
• To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
• Protected images cannot be overwritten.
• RAW images cannot be edited this way.
• Red-eye correction can be applied to JPEG images shot in
, but
the original image cannot be overwritten.
16D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Movies
Editing Movies
You can cut movies to remove unneeded portions at the beginning or end.
Choose *.
and press the m button.
X The movie editing panel and editing bar are
now displayed.
Movie Editing Panel
Specify portions to cut.
z Press the op buttons to choose
or
.
z To view the portions you can cut (identified by
on the screen), press the qr buttons or
turn the 7 diato move . Cut the beginning
of the ie (fm
cut the d of the movie by choosing
) by choosing
, and
.
z if yu move to a position other than a
Movie Editing Bar
ark, choosing
will only cut the
portion from the nearest
to the left, and
choosing
nearest
will cut the portion from the
to the right.
Review the edited movie.
z Press the op buttons to choose
, and
then press the m button. The edited movie is
now played.
z To edit the movie again, repeat step 2.
z To cancel editing, press the op buttons to
choose
. Press the m button, choose
[OK] (either press the qr buttons or turn the
7 dial), and then press the m button again.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d6. 5
Editing Movies
Save the edited movie.
z
Press the op buttons to choose
, and then
press the
m
button.
z Press the opqr buttons or turn the 7 dial
to choose [New File], and then press the m
button.
X The movie is now saved as a new file.
• To overwrite the original movie with the cut one, choose [Overwrite]
in step 4. In this case, the original movie will be erased.
• Only [Overwrite] is available when memory cards lack sufficient free
space.
• Movies may not be saved if the battery runs out while saving is in
progress.
• When editing movies, you should use a fully charged battery or an
16D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Basic Camera Functions
Functions can be configured on the 3 tab. Customize commonly used
Silencing Camera Operations
Silence camera sounds and movies as follows.
z Choose [Mute], and then choose [On].
• Operation can also be silenced by holding down the p button as you turn the
camera on.
restore sound during movies, press the o butoAdjust volume with the op
buttons, as needed.
Adjusting the Volum
Adjust the volume of individal camera sounds as follows.
z Choose [Volume], and then press the m
button.
z Choose an item, and then press the qr
buttons to adjust the volume.
16D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Basic Camera Functions
Customizing Sounds
Customize camera operating sounds as follows.
z Choose [Sound Options], and then press the
m button.
z Choose an item, and then press the qr
buttons to choose an option.
Preset sounds
1, 2
(cannot be modified)
Preset sounds
3
Can be changed by using the included
software.
• The default shutter sound is used in
changes to [Shutter Sound].
Hiding Hints and Tps
z Choose [Hints & Tips], and then choose [Off].
Download from Www.Somanuals.com. All Manuals Search And Downloa1d6. 9
Adjusting Basic Camera Functions
Screen Brightness
Adjust screen brightness as follows.
z Choose [LCD Brightness], and then press the
qr buttons to adjust the brightness.
• For maximum brightness, press and hold the p button for at least one second
when the shooting screen is displayed or when in single-image display. (This
will override the [LCD Brightness] setting on the 3 tab.) To restore the original
brightness, press and hold the p button again for at least one second or restart
the camera.
Start-up Screen
Customize the start-up screen shoer ou turn the camera on as follows.
z Choose [Start-up Image], and then press the
m button.
z Press the qr buttons or turn the 7 dial to
choose an option.
No start-up image
Preset images
1, 2
(cannot be modified)
Preset images
3
Assign desired shots, or use the included
software to change the image.
17D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Basic Camera Functions
Customizing the Start-up Screen
Access the [Start-up Image] screen
in Playback mode.
z Press the 1 button.
z Following the previous procedure, choose [3]
and press the m button.
Choose one of your shots.
z Choose an image and press the m button.
After [Register?] is displayed, choose [OK]
(either press the qr buttons or turn the 7
dial), and then press the m button.
• The previous start-up setting irwriten when you assign a new
start-up image.
• You can assign the operating s and start-up images for your camera from
the included softwarFor details, refer to the Software Guide.
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy images
on the memory card to a computer, or take other steps to back them up.
an Eye-Fi card, install the software on a computer.
Access the [Format] screen.
z Choose [Format], and then press the m
button.
Choose [OK].
z Press the qr buttons or turn the 7 dial to
choose [OK], and then press the m button.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d7. 1
Adjusting Basic Camera Functions
Format the memory card.
z To begin the formatting process, press the
op buttons or turn the 7 dial to choose
[OK], and then press the m button.
z When formatting is finished, [Memory card
formatting complete] is displayed. Press the
m button.
• Formatting or erasing data on a memory card only changes file
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards, take
steps to protect personal information if necessary, as by physically
destroying cards.
• The total card capacity indicated on the formatting screen may be less than the
advertised capacity.
Low-Level Formatting
Perform low-level formatting in theses: Memory card error] is displayed,
the camera is not working correctly, mage reading/writing is slower,
continuous shooting is slowe, or movirecording suddenly stops. Low-level
formatting erases all data on a meory card. Before low-level formatting, copy
images on the memory card to a computer, or take other steps to back them up.
Perform low-level formatting.
op buttons or turn the 7 dial to choose
[Low Level Format], and then select this
option (mark with a
buttons.
) by pressing the qr
z Press the opqr buttons or turn the 7 dial
to choose [OK], press the m button, and
level format) the memory card.
because data is erased from all storage regions of the memory card.
• You can cancel low-level formatting in progress by choosing [Stop]. In this case,
all data will be erased, but the memory card can be used normally.
17D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Basic Camera Functions
File Numbering
Your shots are automatically numbered in sequential order (0001 – 9999) and
saved in folders that store up to 2,000 images each. You can change how the
camera assigns file numbers.
z Choose [File Numbering], and then choose
an option.
Images are numbered
consecutively (until the 9999th shot
is taken/saved) even if you switch
Continuous
memory cards.
Image numbering is reset to 0 if you
Auto Reset
switch memory cards, or when a
new folder is created.
• Regardless of the option selected in this setng, shots may be numbered
consecutively after the last number of exisimages on newly inserted
memory cards. To start saving shom 001, use an empty (or formatted
(p. 171)) memory card.
• Refer to the Software Guidormation on the card folder structure and
image formats.
Date-Based Image Storage
Instead of saving images in folders created each month, you can have the
camera create folders each day you shoot to store shots taken that day.
z Choose [Create Folder], and then choose
[Daily].
X Images will now be saved in folders created
on the shooting date.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d7. 3
Adjusting Basic Camera Functions
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press the
after you press the 1 button, set the retraction timing to [0 sec.].
z Choose [Lens Retract], and then choose [0
sec.].
Power-Saving Adjustment
Adjust the timing of automatic camera and screedeactivation (Auto Power
Acs te [Power Saving] screen.
z ChoPower Saving], and then press the
m button.
Configure the settings.
z After choosing an item, press the qr buttons
to adjust it as needed.
• To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
• The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].
17D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Basic Camera Functions
World Clock
To ensure that your shots will have the correct local date and time when you
travel abroad, simply register the destination in advance and switch to that
time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
home time zone.
Specify your destination.
z Choose [Time Zone], and then press the m
button.
z Press the op buttons or turn the 7 dial to
choose [
button.
World], and then press the m
z Press the qr buttons or turn the 7 dial to
choose the dtination.
z To selight aving time (1 hour ahead),
s thop buttons to choose
z the m button.
.
Switch to the destination time
zone.
z Press the op buttons or turn the 7 dial to
choose [
n button.
is now shown on the shooting screen
World], and then press the
X
• Adjusting the date or time while in
your [ Home] time and date.
mode (p. 19) will automatically update
Download from Www.Somanuals.com. All Manuals Search And Downloa1d7. 5
Adjusting Basic Camera Functions
Date and Time
Adjust the date and time as follows.
Access the [Date/Time] screen.
z Choose [Date/Time], and then press the m
button.
Configure the setting.
z Press the qr buttons to choose an item, and
then adjust the setting, either by pressing the
op buttons or turning the 7 dial.
Metric/Non-Metric Display
z Choose [Dnce Units], and then choose [ft/
in]
Electronic Level Calibration
Calibrate the electronic level if it seems ineffective in helping you level the
camera.
the camera in advance.
Level the camera.
z Mount the camera on a tripod and make sure
it is level.
17D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Basic Camera Functions
Access the [Electronic Level]
screen.
z Choose [Electronic Level], and then press the
m button.
Calibrate the electronic level.
z Choose [Calibrate] and press the m button.
A confirmation message is displayed.
z Choose [OK], and then press the m button.
Resetting the Electronic Level
Restore the electronic level to its original state as follows. Note that this is not
possible unless you have calibrated the electronic level.
z Choose [Electronic Level], and then press the
m button.
z Choose Rese, and then press the m
button
X thelectronic level has been reset, the
screen is displayed again.
Setting Copyright Information to Record in
Images
To record the author’s name and copyright details in images, set this
information beforehand as follows.
Access the setting screen.
z Choose [Copyright Info], and then press the
m button.
z Press the op buttons or turn the 7 dial to
choose [Enter Author’s Name] or [Enter
Copyright Details], and then press the m
button.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d7. 7
Adjusting Basic Camera Functions
Enter a name.
z Press the opqr buttons or turn the 7 dial
to choose a character, and then press the m
button to enter it.
z Up to 63 characters can be used.
z Press the a button to delete single
characters.
z Turn the z dial or choose
or
and
press the m button to move the cursor.
Save the settings.
z Press the n button. [Accept changes?]
is displayed.
z Press the qr buttons or turn the 7 dial to
choose [Yes], and then press the m button.
X The information st here will now be recorded
in images.
• To check the information entered, oosisplay Copyright Info] on the screen
in step 1, and then press the m .
copyright information. Some characs entered with the included software may
not display on the camerabut ill be correctly recorded in images.
• You can view, change, and delete copyright information recorded in images by
using the included software after saving images to a computer.
Deleting All Copyright Information
You can delete both the author’s name and copyright details at the same time
as follows.
Copyright Info].
z Press the qr buttons or turn the 7 dial to
choose [OK], and then press the m button.
• The copyright info already recorded in images will not be deleted.
17D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Basic Camera Functions
Display Language
Change the display language as needed.
Access the [Language] screen.
z Choose [Language ], and then press the
m button.
Configure the setting.
z Press the opqr buttons or turn the 7 dial
to choose a language, and then press the m
button.
• You can also access the [Language] screen in Playback mode by pressing and
holding the m button and immediately pressing the n button.
Adjusting Other Settins
The following settings can also djued on the 3 tab.
•
•
•
[Ctrl via HDMI] (p. 188
Restoring Defaults
If you accidentally change a setting, you can restore default camera settings.
Access the [Reset All] screen.
z Choose [Reset All], and then press the m
button.
Restore default settings.
z Press the qr buttons or turn the 7 dial to
choose [OK], and then press the m button.
X Default settings are now restored.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d7. 9
Adjusting Basic Camera Functions
• The following functions are not restored to default settings.
]
18D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Tips on Using Included Accessories
Effective Battery and Charger Use
• Charge the battery on (or immediately before) the day of
use
Charged batteries gradually lose their charge, even when
they are not used.
You can easily check the charge state of the battery by
attaching the cover so that o is visible on a charged battery,
and attaching it so that o is not visible on an uncharged
battery.
• Long-term battery storage
After using up all remaining battery power, remove the battery from the camera.
Store the battery with the cover attached. Storing a partially charged battery over
extended periods (about a year) may shorten its life or affect performance.
• Using the battery charger abroad
The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For
power outlets in a different format, use a commercially available adapter for the
plug. Never use an electrical transformer designed or traveling, which may
damage the battery.
Optional Accesses
The following camera accesories ald separately. Note that availability
varies by area, and some acessoies may no longer be available.
Power Supplies
Battery Pack NB-10L
z Rechargeable lithium-ion battery
Battery Charger CB-2LC
z Charger for Battery Pack NB-10L
AC Adapter Kit ACK-DC80
z For powering the camera using household
power. Recommended when using the
camera over extended periods, or when
connecting the camera to a printer or
computer. Cannot be used to charge the
camera battery.
18D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
• The battery charger and AC adapter kit can be used in areas with 100
– 240 V AC power (50/60 Hz).
• For power outlets in a different format, use a commercially available
adapter for the plug. Never use an electrical transformer designed for
traveling, which may damage the battery.
Flash Units
Speedlite 580EX II/430EX II/320EX/270EX II
z Shoe-mounted flash unit that enables many
styles of flash photography.
Speedlite Bracket SB-E2
z Prevents unnatural shadows next to subjects
duringverticalhooting. IncludesOff-Camera
Shoe d OCE3.
Ste ransmitter ST-E2
z es wireless control of slave Speedlite
flash units.
Macro Twin Lite MT-24EX
Macro Ring Lite MR-14EX
z External macro flash units that enable many
styles of macro flash photography.
The Macro Twin Lite requires Macrolite
Adapter MLA-DC1, Off-Camera Shoe Cord
OC-E3, and Bracket BKT-DC1 (all sold
separately) for attachment to the camera.
The Macro Ring Lite requires Macrolite
Adapter MLA-DC1 (sold separately) for
attachment to the camera.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d8. 3
Optional Accessories
Off-Camera Shoe Cord OC-E3
z Used to attach a Macro Twin Lite flash to the
camera.
Bracket BKT-DC1
z Used to attach a Macro Twin Lite flash to the
camera.
Macrolite Adapter MLA-DC1
z Used to attach a Macro Ring Lite or Macro
Twin Lite flash to the camera.
Other Accessories
Soft Ce SDC75
z Prhe camera from dust and scratches.
Hanith care to prevent leather
discoloration.
Waterproof Case WP-DC44
z For underwater photography at depths of up
to 40 meters (130 ft.). Also useful for shooting
in the rain, at the beach, or on ski slopes.
Waterproof Case Weight WW-DC1
z Prevents the waterproof case from floating
during underwater photography.
HDMI Cable HTC-100
z For connecting the camera to an HDMI input
of a high-definition TV.
18D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
Stereo AV Cable AVC-DC400ST
z Connect the camera to a TV to enjoy
playback on the larger TV screen.
Remote Switch RS60-E3
z Enables remote shutter button operation
(pressing the button halfway or all the way
down).
Lens Hood LH-DC70
z Prevents extraneous light outside the angle
of view from entering the lens and causing
flares or ghosting, which reduce image
quality.
Filter Adapter FA-DC58C
z Adapter requird when mounting a 58 mm
filter.
Canon Lens Filter (58 mm dia.)
z Protects the lens and enables a variety of
shooting effects.
• A lens hood and filter adapter cannot be attached to the camera at the same
time.
Printers
Canon PictBridge-Compatible Printers
z Printing images without a computer is
possible by connecting the camera to a
Canon PictBridge-compatible printer.
For details, visit your nearest Canon dealer.
SELPHY
Series
PIXMA
Series
Download from Www.Somanuals.com. All Manuals Search And Downloa1d8. 5
Using Optional Accessories
Still Images
Movies
Playback on a TV
By connecting the camera to a TV, you can view your shots on the larger
screen of the TV.
For details on connection or how to switch inputs, refer to the TV manual.
Playback on a Standard-Definition TV
Connecting the camera to a TV with the Stereo AV Cable AVC-DC400ST
(sold separately) enables you to view your shots on the larger screen of the
TV as you control the camera.
Make sure the camera and TV are
off.
White
Coect he camera to the TV.
z On , insert the cable plugs fully into the
Red
Yellow
Yellow
video iputs as shown.
Red
White
z On the camera, open the terminal cover and
insert the cable plug fully into the camera
terminal.
Turn the TV on and switch to video
input.
z Switch the TV input to the video input you
connected the cable to in step 2.
18D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Using Optional Accessories
Turn the camera on.
z Press the 1 button to turn the camera on.
X Images from the camera are now displayed
on the TV. (Nothing is displayed on the
camera screen.)
z When finished, turn off the camera and TV
before disconnecting the cable.
• Correct display is not possible unless the camera video output format
(NTSC or PAL) matches the TV format. To change the video output
format, press the n button and choose [Video System] on the
3 tab.
• When the camera and TV are connected, you can also shoot while previewing
shots on the larger screen of the TV. To shoot, follow the same steps as when
using the camera screen.
Playback on a High-DefinitiTV
Connecting the camera to an HDTV wthe HDMI Cable HTC-100 (sold
separately) enables you to view shts on the larger screen of the TV.
Movies shot at a resolutin of
can be viewed in high-definition.
Make sure the camera and TV are
off.
Connect the camera to the TV.
z On the TV, insert the cable plug fully into the
HDMI input as shown.
z On the camera, open the terminal cover and
insert the cable plug fully into the camera
terminal.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d8. 7
Using Optional Accessories
Display images.
images.
• Camera operating sounds are not played while the camera is connected to an
HDTV.
Controlling the Camera with a TV Remote
Connecting the camera to an HDMI CEC-compatible TV enables playback
(including slideshow playback) using the TV remote control.
In this case, you will need to adjust some TV settings. For details, refer to the
TV user manual.
Configure the settings.
z
Press the
HDMI] on the
(p. 41).
n
button, choose [Ctrl via
tab, and then choose [Enable]
3
Coct he camera to the TV.
camera to the TV.
Display images.
z Turn on the TV. On the camera, press the 1
button.
X Images from the camera are now displayed
on the TV. (Nothing is displayed on the
camera screen.)
Control the camera with the TV
remote.
z Press the qr buttons on the remote to
browse images.
z To display the camera control panel, press
the OK/Select button. Select control panel
items by pressing the qr buttons to choose
an item, and then pressing the OK/Select
button again.
18D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Using Optional Accessories
Camera Control Panel Options Shown on the TV
Return
Closes the menu.
Displays sets of images shot in
displayed when a grouped image is selected.)
Group Playback
Starts movie playback. (Only displayed when a movie is
selected.)
Play Movie
Slideshow
Starts slideshow playback. To switch images during
playback, press the qr buttons on the remote control.
.
Index Playback
Change Display
Displays multiple images in an index.
l
• Pressing any buttons on the camera will switch control to the camera itself,
which will prevent remote control until you return to single-image display.
• The camera may not always respond correcteven if the remote is for an HDMI
CEC-compatible TV.
Powering the Cama with Household Power
Powering the camera wih AC Ar Kit ACK-DC80 (sold separately)
eliminates the need to mnitor he remaining battery level.
Make sure the camera is off.
Connect the adapter to the coupler.
z Insert the adapter plug fully into the coupler.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d8. 9
Using Optional Accessories
Insert the coupler.
then insert the coupler as shown until it locks
into place.
z Close the cover ( ) making sure the coupler
cable fits into the coupler cable port ( ) and
press downward until it clicks into place.
Coupler Cable Port
Cot the power cord.
z Insert ne end of the power cord into the
compact power adapter, and then plug the
other end into a power outlet.
z Turn the camera on and use it as desired.
z When finished, turn the camera off and
unplug the power cord from the outlet.
• Do not disconnect the adapter or unplug the power cord while the
camera is still on. This may erase your shots or damage the camera.
• Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.
19D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Using Optional Accessories
Still Images
Movies
Using a Lens Hood (Sold Separately)
For wide-angle shots of backlit subjects without using the flash, attach
optional Lens Hood LH-DC70 to prevent light outside the angle of view from
entering the lens.
Attach the hood.
z Align the lens hood mark ( ) with the
camera mark ( ), and turn the lens hood in
the direction of the arrow until it locks in
place.
z To remove the lens hood, turn it the opposite
direction.
• Vignetting may occur if you use the built-in flash when the lens hood
is attached.
• The filter adapter and a lens hood cannot be attached to the camera at the same
time.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d9. 1
Using Optional Accessories
Still Images
Movies
Using Lens Filters (Sold Separately)
Attaching a lens filter to the camera protects the lens and allows you to shoot
with various effects. To attach a lens filter, you will need Filter Adapter FA-
DC58C (sold separately).
Attach the filter adapter.
z Align the notches on the camera and the filter
adapter and turn the adapter in the direction
of the arrow until locked.
z To remove the filter adapter, turn it in the
opposite direction.
Attach a filter.
z Turn the filter ite direction of the arrow to
attach it camera.
z Makure ot to attach the filter too tightly.
Docold prevent removal of the filter
and age the camera.
• We recommend the use of genuine Canon filters (58 mm dia.).
• When not using auto focus to shoot, set the manual focus option
[Safety MF] to [On].
•
If you use the built-in flash with the filter adapter attached, portions of
the image may appear darker.
• When using the filter adapter, be sure to use only one filter at a time.
Attaching multiple filters, or accessories such as a heavy lens, may
cause the attachments to fall off or damage the camera or adapter.
• Do not grip the filter adapter tightly.
• Remove the filter adapter when not using a filter.
• The filter adapter and a lens hood cannot be attached to the camera at the same
time.
19D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Using Optional Accessories
Still Images
Using a Remote Switch (Sold Separately)
An optional Remote Switch RS60-E3 can be used to avoid camera shake that
may otherwise occur when pressing the shutter button directly. This optional
accessory is convenient when shooting at slow shutter speeds.
Connect the remote switch.
z Make sure the camera is off.
z Open the terminal cover and insert the
remote switch plug.
Shoot.
z To shoot, press the release button on the
remote switch.
• Bulb photography (long eosu) is not supported.
Still Images
Movies
Using an External Flash (Sold Separately)
More sophisticated flash photography is possible with an optional Speedlite
EX series flash. For movie shooting using an LED light, the optional Speedlite
320EX flash is available.
• This camera does not support some Speedlite EX series functions.
• Non-EX series Canon flash units may not fire correctly or may not fire
at all, in some cases.
• Use of non-Canon flash units (especially high-voltage flash units) or
flash accessories may prevent normal camera operation and may
damage the camera.
• Also refer to the Speedlite EX series manual for additional information.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d9. 3
Using Optional Accessories
Still Images
Movies
Speedlite 580EX II/430EX II/320EX/270EX II
These optional flash units can provide bright lighting and meet a variety of
flash photography needs.
Attach the flash unit to the hot
shoe.
Turn the flash on, and then turn the
camera on.
X A red h icon is now displayed.
X The flash pilot lamp will light up when the
flash is ready.
Choose shooting mode G, M,
B, or D.
z Flash setcan nly be configured in
theod. In other modes, the flash is
adjand fired automatically, as needed.
Configure settings for the external
flash.
z Press the n button, choose [Flash
Control] on the 4 tab, and then press the m
button.
X Options already set on the flash itself are
displayed.
z Press the op buttons or turn the 7 dial to
choose an item, and then adjust the setting
by pressing the qr buttons.
z Available settings vary depending on the
shooting mode and the flash attached
19D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Using Optional Accessories
• Settings for the built-in flash cannot be configured while a Speedlite EX series
flash is attached, because that setting screen is no longer accessible.
• You can also access the setting screen by pressing the r button for at least one
second.
• Flash settings in
mode.
shooting mode can be configured just as they are in G
• 580EX II only: [Flash Control] is not available if the external flash has been set
up for stroboscopic flash.
• 320EX only: Auto LED lighting is only available in low-light movie recording or
in Movie mode. In this case, the
icon is shown.
Still Images
Movies
Using Speedlite Bracket SB-E2 (Sold Separately)
z Using the optional Speedlite Bracket SB-E2
can help prevent unnatural shadows next to
subjects during vertical shooting.
z To keep the LD screen out of the way of the
bracket, use e screen closed and facing
outwa
Still Images
Macro Ring Lite MR-14
This optional flash unit enblemany styles of macro flash photography.
Requires Macrolite Adapter MLA-DC1 (sold separately) for attachment to the
camera.
Remove the ring.
z Make sure the camera is off.
z Hold down the ring release button ( ) and
turn the ring in the direction of the arrow ( ).
z Align the { mark on the ring with the z mark
on the camera, and then lift the ring off.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d9. 5
Using Optional Accessories
Attach the macrolite adapter.
z Align the z mark on the macrolite adapter
with the z mark on the camera, and then turn
the adapter in the direction of the arrows until
it locks in place.
z To remove the adapter, hold down the ring
release button and turn the adapter in the
opposite direction.
Attach the controller to the camera.
z Attach the control component of the macro
ring lite to the hot shoe on top of the camera.
Attach tflah unit to the
macrolitadapter.
z Prerelease buttons on both sides of
the mo ring lite and attach the macro ring
lite to the macrolite adapter.
Choose shooting mode G, M,
B, or D.
z Flash settings can only be configured in
these modes. In other modes, the flash is
adjusted and fired automatically, as needed.
19D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Using Optional Accessories
Set [ND Filter] to [On] (p. 99).
Configure the external flash.
• Keep cords (from the macro ring lite) away from flash heads.
• When using a tripod, adjust the position of the legs to prevent them
from coming into contact with the flash heads.
• Use the screen to compose shots, because the viewfinder cannot be
used with these accessories attached.
Macro Twin Lite MT-24EX
This optional flash unit enables many styles of macro flash photography.
Requires Macrolite Adapter MLA-DC1, Off-Camera Shoe Cord OC-E3, and
Bracket BKT-DC1 (all sold separately) for attchment to the camera.
Remthe ring and attach the
croite adapter.
ring, and then attach the macrolite adapter.
Attach the off-camera shoe cord to
the bracket.
z Slide the bracket screw to the outer end of the
bracket. Align the bracket screw with the
tripod socket of the off-camera shoe cord,
and then tighten the screw to secure it.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d9. 7
Using Optional Accessories
Attach the bracket to the camera.
z Slide the other bracket screw to the outer end
of the bracket. Align the bracket screw with
the tripod socket on the bottom of the
camera, and then tighten the screw to secure
it.
Attach the off-camera shoe cord to
the camera.
z Attach the camera connection component of
the off-camera shoe cord to the hot shoe on
top of the camera
Attach tcontroller to the off-
cashoe cord.
z Attace controller for the Macro Twin Lite
to he flash connection component of the
off-camera shoe cord.
Attach the flash unit to the
macrolite adapter.
z
Attach each flash head to the respective mount
). Press the release button on the top of the
(
ring in and attach the ring to the macrolite
adapter ( ).
19D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Using Optional Accessories
Configure the external flash and
settings on the camera.
settings.
• Keep cords (from the macro twin lite and off-camera shoe cord) away
from flash heads.
• When using a tripod, adjust the position of the legs to prevent them
from coming into contact with the flash heads or the bracket.
• Depending on the position where you have attached the flash
controller, it may come into contact with the LCD monitor. To prevent
this, adjust the position of attachment or the orientation of the
controller, adjust the angle of the screen, or use the screen closed
and facing outward.
• Use the screen to compose shots, because the viewfinder cannot be
used with these accessories attached.
Download from Www.Somanuals.com. All Manuals Search And Downloa1d9. 9
Using Optional Accessories
Still Images
Camera Settings Available with an External Flash (Sold
Separately)
The following settings are available in G, M, B, or D mode. In other
shooting modes, only [Red-Eye Corr.] and [Red-Eye Lamp] can be
configured. (The flash is adjusted and fired automatically, as needed.)
Shooting Mode
Item
Options
G
{
{
{
M
{
B
{
D
—
Auto*1
Flash Mode
Manual*2
–3 to +3
{
{
{
—
Flash Exp. Comp*3
Flash Output*4
Shutter Sync.
{
{
1/128*5 to 1/1
(in 1/3-stop increments)
{
{
{
{
{
{
1st-curtain/2nd-curtain/i-spe
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
On
{
{
Slow Synchro
—
—
Off
Wireless Func.*6
Red-Eye Corr.
Red-Eye Lamp
On/Of
On/Off
On/Off
On
{
{
{
{
{
{
{
{
{
—
Safety FE*7
Off
{
{
Clear Flash Settings*8
*1E-TTL mode is used for the flash.
*2M mode is used for the flash.
In D shooting mode, E-TTL mode is also available for the flash. In this case, when the
flash fires, flash exposure compensation set on the flash is applied to the flash output
level set on the camera.
*3Can be configured only when [Flash Mode] is [Auto] and flash exposure compensation
set on the flash is [+0]. When you adjust flash exposure compensation on the flash, the
camera display will be updated (580EX II and 430EX II only).
*4Can be configured when [Flash Mode] is [Manual]. Linked to settings on the flash unit.
*51/64 for Speedlite 430EX II/320EX/270EX II, Macro Ring Lite MR-14EX, and Macro
Twin Lite MT-24EX.
20D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Using Optional Accessories
*6For options other than On/Off, configure the setting on the flash unit itself. Not available
with Speedlite 430EX II/320EX/270EX II, Macro Ring Lite MR-14EX, or Macro Twin
Lite MT-24EX. When this setting is set to [On], [Shutter Sync.] cannot be set to [2nd-
curtain]. (If [Shutter Sync.] is set to [2nd-curtain], it will be changed to [1st-curtain].)
*7Can only be configured when [Flash Mode] is [Auto].
*8Restores all default settings. You can also restore defaults for [Slow Synchro], [Safety
FE], [Red-Eye Corr.], and [Red-Eye Lamp] by using [Reset All] in the 3 menu on the
• Flash settings in
mode.
shooting mode can be configured just as they are in G
Download from Www.Somanuals.com. All Manuals Search And Downloa2d0. 1
Still Images
Movies
Printing Images
Your shots can easily be printed by connecting the camera to a printer. On
the camera, you can specify images to set up batch printing, prepare orders
for photo development services, and prepare or print images for photobooks.
A Canon SELPHY CP series compact photo printer is used here for the sake
of illustration. Screens displayed and available functions vary by printer. Also
refer to the printer manual for additional information.
Still Images
Easy Print
Easily print your shots by connecting the camera to a PictBridge-compatible
Make sure the camera and printer
are off.
Connect the camera to the printer.
z Open the er. Holding the smaller cable
plue oientation shown, insert the plug
fully he camera terminal.
z Connect the larger cable plug to the printer.
For other connection details, refer to the
printer manual.
Turn the printer on.
Turn the camera on.
z Press the 1 button to turn the camera on.
20D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Printing Images
X
is displayed.
Choose an image.
z Press the qr buttons or turn the 7 dial to
choose an image.
Print the image.
z Press the c button.
X Printing now begins.
z To print other images, repeat steps 5 – 6 after
printing is finied.
z When are nished printing, turn the
cmernd printer off and disconnect the
ce cable.
• RAW images cannot bprted.
Still Images
Configuring Print Settings
Access the printing screen.
choose an image, press the
access the screen at left.
button to
m
Configure the setting.
z Press the op buttons or turn the 7 dial to
choose an item, and then choose an option
by pressing the qr buttons.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d0. 3
Printing Images
Default
Date
Matches current printer settings.
Prints images with the date added.
Prints images with the file number added.
Prints images with both the date and file number added.
—
File No.
Both
Off
Default
Off
Matches current printer settings.
—
Uses information from the time of shooting to print under
optimal settings.
On
Red-Eye 1
Corrects red-eye.
No. of Copies Choose the number of copies to print.
Trimming
—
—
Specify a desired image area to print (see below).
Paper
Settings
Cropping Images Before ing (Trimming)
By cropping images before pintin, you can print a desired image area
instead of the entire image.
Choose [Trimming].
printing screen, choose [Trimming] and press
the m button.
X A cropping frame is now displayed, indicating
the image area to print.
Adjust the cropping frame as
needed.
z To resize the frame, move the zoom lever.
z To move the frame, press the opqr
buttons.
z To rotate the frame, turn the 7 dial.
z When finished, press the m button.
20D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Printing Images
Print the image.
z On the screen in step 1, press the op
buttons or turn the 7 dial to choose [Print],
and then press the m button.
• Cropping may not be possible at small image sizes, or at some
aspect ratios.
• Dates may not be printed correctly if you crop images shot with [Date
Stamp] selected.
Choosing Paper Size and Layout Before Printing
Choose [Paper Settings].
printing screen, choose [Paper Settings] and
press the m utton.
se a paper size.
z Press the op buttons or turn the 7 dial to
choose an option, and then press the m
button.
Choose a type of paper.
z Press the op buttons or turn the 7 dial to
choose an option, and then press the m
button.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d0. 5
Printing Images
Choose a layout.
z Press the op buttons or turn the 7 dial to
choose an option.
z When choosing [N-up], press the qr buttons
to specify the number of images per sheet.
z Press the m button.
Print the image.
Available Layout Options
Default
Matches current printer settings.
Bordered
Borderless
N-up
Prints with blank space around the image.
Borderless, edge-to-edge printing.
Choose how many images to print pr seet.
Prints images for identification ses.
Only available for images h a olution of L and an aspect ratio of 4:3.
ID Photo
Choose the print size.
Choose from 3.x 5 in., pard, or wide-format prints.
Fixed Size
Printing ID Photos
Choose [ID Photo].
Photo] and press the m button.
Choose the long and short side
length.
z Press the op buttons or turn the 7 dial to
choose an item. Choose the length by
pressing the qr buttons, and then press the
m button.
20D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Printing Images
Choose the printing area.
area.
Print the image.
Movies
Printing Movie Scenes
Access the printing screen.
movie, and thn press the m button.
z Press qr uttons to choose c, and then
pess tm button. The screen at left is
ye.
Choose a printing method.
z Press the op buttons or turn the 7 dial to
choose
choose the printing method.
, and then press the qr buttons to
Print the image.
Movie Printing Options
Single
Prints the current scene as a still image.
Prints a series of scenes, a certain interval apart, on a single sheet of
paper. You can also print the folder number, file number, and elapsed
time for the frame by setting [Caption] to [On].
Sequence
• To cancel printing in progress, press the
• [ID Photo] and [Sequence] are not available with Canon PictBridge-compatible
button.
m
printer models earlier than CP720 and CP730.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d0. 7
Printing Images
Still Images
Adding Images to Print Orders (DPOF)
can be set up on the camera. Choose up to 998 images on a memory card
and configure relevant settings, such as the number of copies, as follows. The
printing information you prepare this way will conform DPOF (Digital Print
Order Format) standards.
• RAW images cannot be included in print orders.
Adding Images to Print Orders via the c Button
You can add images to print orders (DPOF) after your shot or later during
playback simply by pressing the c button.
Choose an image.
z Press thbuttns or turn the 7 dial to
choan mage.
Adimage to the print list.
z Prss the c button.
z Press the op buttons to specify the number
of prints. Choose [Add] by pressing the qr
buttons or turning the 7 dial, and then press
the m button.
z To remove the image from the print order,
repeat steps 1 – 2 but choose [Remove] by
pressing the qr buttons or turning the 7
dial, and then press the m button.
• Print orders cannot be set up while the camera is connected to a printer.
20D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Printing Images
Configuring Print Settings
Specify the printing format, whether to add the date or file number, and other
settings as follows. These settings apply to all images in the print order.
z Press the n button, and then choose
[Print Settings] on the 2 tab. Choose and
Standard
Index
One image is printed per sheet.
Smaller versions of multiple images are printed per
sheet.
Print Type
Both
On
Both standard ad index formats are printed.
Images printwith the shooting date.
Date
Off
On
are printed with the file number.
—
File No.
Off
All image print order settings are cleared after
printing.
On
Off
Clear DPOF
data
—
• Not all of your DPOF settings may be applied in printing by the printer
or photo development service, in some cases.
•
may be displayed on the camera to warn you that the memory
card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all
previous settings.
• Setting [Date] to [On] may cause some printers to print the date twice.
• Specifying [Index] will prevent you from choosing [On] for both [Date] and [File
No.] at the same time.
• The date is printed in a format matching setting details in [Date/Time] on the 3
• Index printing is not available on some Canon PictBridge-compatible printers
(sold separately).
Download from Www.Somanuals.com. All Manuals Search And Downloa2d0. 9
Printing Images
Setting Up Printing for Individual Images
Choose [Select Images & Qty.].
z Press the n button, choose [Select
Images & Qty.] on the 2 tab, and then press
the m button.
Choose an image.
z Press the qr buttons or turn the 7 dial to
choose an image, and then press the m
button.
X You can now specify the number of copies.
z If you specify index printing for the image, it is
labeled with a
printing for the image, press the m button
again. is no lnger displayed.
icon. To cancel index
Specify e number of prints.
z Pree p buttons or turn the 7 dial to
spe number of prints (up to 99).
z To sep printing for other images and
spcify the number of prints, repeat steps 2 –
3.
z Printing quantity cannot be specified for index
prints. You can only choose which images to
print, by following step 2.
z When finished, press the n button to
return to the menu screen.
Setting Up Printing for a Range of Images
Choose [Select Range].
z Following step 1 above, choose [Select
Range] and press the m button.
Choose images.
images.
21D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Printing Images
Configure the print settings.
z Press the op buttons to choose [Order],
and then press the m button.
Setting Up Printing for All Images
Choose [Select All Images].
Images] and press the m button.
Configure the print settings.
z Press the qr buttons or turn the 7 dial to
choose [OK], and then press the m button.
Clearing All Print Orders
Choose [Cear All Selections].
Selecand press the m button.
irm clearing the order.
z Prs the qr buttons or turn the 7 dial to
choose [OK], and then press the m button.
Printing Images Added to Print Orders (DPOF)
z When images have been added to the print
displayed after you connect the camera to a
PictBridge-compatible printer. Press the op
buttons to choose [Print now], and then
simply press the m button to print the
images in the print list.
z Any DPOF print job that you temporarily stop
will be resumed from the next image.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d1. 1
Still Images
Movies
Using an Eye-Fi Card
Inserting a prepared Eye-Fi card enables automatic wireless transfer of
images to a computer or uploading to a photo-sharing website.
Images are transferred by the Eye-Fi card. Refer to the card’s user manual or
contact the manufacturer for instructions on preparing and using cards or
resolving transfer problems.
• When using an Eye-Fi card, keep the following points in mind.
• Cards may continue to transmit radio waves even when [Eye-Fi
entering hospitals, aircraft, or other areas where transmission is
prohibited.
• When troubleshooting image transfer issues, check the card and
computer settings. For details, refer to the card’s user manual.
• Poor wireless connections may cause imge transfer to take a long
time, and transfer may be interrupted in ome cases.
• Eye-Fi cards may become hot, dtheitransfer functions.
• Battery power will be consd fater than in normal use.
• Camera operation may beluggish. To resolve this, try setting
[Eye-Fi trans.] to [Dsable].
Connection status of Eye-Fi cards in the camera can be checked on the
shooting screen (in regular information display mode) or playback screen (in
simple information display mode).
(Gray)
Not connected
Connecting
(Blinking white)
(White)
Connected
(Animated)
Transfer in progress
Interrupted
Error acquiring Eye-Fi card information (Restart the camera.
Repeated display of this icon may indicate a problem with the
card.)
Images labeled with a
icon have been transferred.
21D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Using an Eye-Fi Card
transfer.
• Choosing
mode will interrupt the Eye-Fi connection. Although the Eye-Fi
connection will be restored after you choose another shooting mode or enter
Playback mode, the camera may transfer any movies made in
mode again.
Checking Connection Information
Check the access point SSID used by the Eye-Fi card or the connection
status, as needed.
z Press the n button, choose [Eye-Fi
Settings] on the 3 tab, and then press the
m button.
z Choose [Connection info], and then press the
m button.
X The connection information screen is
displayed.
Disabling Eye-Fi Tsfer
Configure the setting as ollows table Eye-Fi transfer by the card, if
necessary.
Choose [Disable] in [Eye-Fi trans.].
z Press the n button, choose [Eye-Fi
Settings] on the 3 tab, and then press the
m button.
z Choose [Eye-Fi trans.], and then choose
[Disable].
• [Eye-Fi Settings] is not shown unless an Eye-Fi card is in the camera
with its write-protect tab in the unlocked position. For this reason, you
cannot change settings for an inserted Eye-Fi card if the write-protect
tab is in the locked position.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d1. 3
Using an Eye-Fi Card
21D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you think there is a problem with the camera, first check the following. If the
items below do not solve your problem, contact a Canon Customer Support
Help Desk.
Power
Nothing happens when the power button is pressed.
• Confirm that you are using the correct type of battery, and that there is sufficient charge
• Dirty battery terminals reduce battery performance. Try cleaning the terminals with a
cotton swab and reinserting the battery a few times.
The battery is depleted quickly.
• Battery performance decreases at low temperatures. Try warming the battery a little by
putting it in your pocket, for example, with the terminal cover on.
• If these measures do not help and the battery is still depleted soon after charging, it has
reached the end of its life. Purchase a new battery.
The lens is not retracted.
• Do not open the memory card/battery cover while thmera is on. Close the cover,
The battery is swollen.
• Battery swelling is normal and does nansafety concerns. However, if battery
swelling prevents the battery frm fittincamera, contact a Canon Customer
Support Help Desk.
Display on a TV
Shooting
Cannot shoot.
Nothing is displayed (p. 46).
Strange display on the screen under low light (p. 39).
Strange display on the screen when shooting.
Note that the following display problems are not recorded in still images but are recorded
in movies.
• The screen may flicker and horizontal banding may appear under fluorescent or LED
lighting.
21D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
h flashes on the screen when the shutter button is pressed, and shooting is
not possible (p. 47).
• Mount the camera on a tripod or take other measures to keep it still. In this case, set [IS
Mode] to [Off] (p. 120).
Shots are out of focus.
• Press the shutter button halfway to focus on subjects before pressing it all the way down
• Make sure subjects are within focusing range (see “Specifications” in the Getting
Started guide).
• Confirm that unneeded functions such as macro are deactivated.
No AF frames are displayed and the camera does not focus when the shutter
button is pressed halfway.
• To have AF frames displayed and the camera fcucorrectly, try composing the shot
with higher-contrast subject areas centerfore ou press the shutter button
halfway. Otherwise, try pressing the shutttton halfway repeatedly.
Subjects in shots look too dark
Subjects look too bright, highlights are washed-out.
• Reduce the lighting on subjects.
• Adjust brightness by using flash exposure compensation or changing the flash output
Subjects in flash shots look too bright, highlights are washed-out.
• Adjust brightness by using flash exposure compensation or changing the flash output
White dots or similar image artifacts appear in flash shots.
• This is caused by light from the flash reflecting off dust or airborne particles.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d1. 7
Troubleshooting
Shots look grainy.
shots. For best results, have subjects look at the red-eye reduction lamp. Also try
increasing the lighting in indoor scenes and shooting at closer range.
Recording to the memory card takes too long, or continuous shooting is
slower.
Shooting settings or FUNC. menu settings are not available.
• Available setting items vary by shooting mode. Refer to “Functions Available in Each
Shooting Movies
Cannot shoot movies (p. 17).
The elapsed time shown is incorrect, or recorinis interrupted.
• Use the camera to format the memory card, or ch to card that supports high-speed
recording. Note that even if the elapsed time y is inorrect, the length of movies
is displayed and shooting stopmatically.
The camera’s internal memory bffer filled as the camera could not record to the
memory card quickly enough. Try one the following measures.
• Switch to a memory card that supports high-speed recording (see “Specifications” in the
Getting Started guide).
Zooming is not possible.
• Zooming is not possible when shooting movies in modes that do not support digital
zoom.
• Zooming is not possible when shooting movies in
mode.
Subjects look distorted.
• Subjects that pass in front of the camera quickly may look distorted. This is not a
malfunction.
Playback
Playback is not possible.
• Image or movie playback may not be possible if a computer is used to rename files or
alter the folder structure. Refer to the Software Guide for details on folder structure and
file names.
21D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Playback stops, or audio skips.
• Switch to a memory card that you have performed low-level formatting on with the
• There may be brief interruptions when playing movies copied to memory cards that
have slow read speeds.
• When movies are played on a computer, frames may be dropped and audio may skip
if computer performance is inadequate.
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the transfer
speed as follows.
• Press the 1 button to enter Playback mode. Hold the n button down as you press
the o and m buttons at the same time. On the next screen, press the qr buttons to
choose [B], and then press the m button.
Eye-Fi Cards
Download from Www.Somanuals.com. All Manuals Search And Downloa2d1. 9
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way (p. 16).
Memory card locked
• The write-protect tab of the SD/SDHC/SDXC memory card or Eye-Fi card is set to the
locked position. Switch the write-protect tab to the unlocked position (p. 15).
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (p. 16).
• If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help Desk
Insufficient space on card
memory card with enough free space (see “Specificatis” in the Getting Started guide).
Change the battery pack. (p. 15)
No Image.
• The memory card does not cotain any s that can be displayed.
Protected! (p. 148)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play back
AVI/RAW
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
Cannot magnify!/Cannot play back this content in Smart Shuffle/Cannot
rotate/Cannot modify image/Cannot register this image!/Cannot modify/
Cannot assign to category/Unselectable image.
• The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies.
Invalid selection range
to choose an initial image that was after the final image, or vice-versa.
22D0ownload from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Messages
Exceeded selection limit
less.
selected images and try again.
Communication error
• An excessive amount of images (approx. 1,000) on the memory card prevented printing
or image transfer to a computer. To transfer the images, use a commercially available
USB card reader. To print, insert the memory card directly into the printer card slot.
Naming error!
• When the highest folder number (999), and the highest image number (9999) has been
reached, new folders cannot be created, and images cannot be recorded. In the 3
Lens Error
• This error may occur if the lens is held while it is ving, or when the camera is used
in dusty or sandy locations.
• Frequent display of this error messmandicate camera damage. In this case,
contact a Canon Customer SuppoDek.
A camera error was deteted (errumber)
• If this error message is dispayed mmediately after a shot, the image may not have
been saved. Switch to Playback mode to check for the image.
• Frequent display of this error message may indicate camera damage. In this case, write
down the error number (Exx) and contact a Canon Customer Support Help Desk.
File Error
• It may not be possible to print computer-edited images or images shot with another
camera.
Print error
• Check the paper size setting. If this error message is displayed when the setting is
correct, restart the printer and complete the setting on the camera again.
Ink absorber full
• Contact a Canon Customer Support Help Desk to request assistance with ink absorber
replacement.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d2. 1
On-Screen Information
Shooting (Information Display)
Camera orientation*
White balance correction
AEB shooting (p. 97) /
Focus bracketing
Eye-Fi connection status
Metering method (p. 94)
Still image compression
Recordable shots
Remaining time
Digital zoom
Grid lines (p. 128)
Exposure compensation
level (p. 93)
i-Contrast (p. 98)
Mercury lamp correction
magnification (p. 51),
Digital tele-coer
mode icon (p. 49)
Scene icon (p. 48)
Flash mode (p. 116),
LED light (p. 195)
Red-eye correction
Camera shake warning
Flash exposure
Exposure shift bar
Zoom bar (p. 44)
MF indicator (p. 106)
Image stabilization
Time zone (p. 175)
Wind filter (p. 61)
Exposure compensation
compensation / Flash
output level (pp. 117,
Spot AE point frame
Date stamp (p. 54)
ISO speed (p. 95)
22D2ownload from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Information
*
: Regular orientation,
: Held vertically
The camera detects the shooting orientation and adjusts settings for optimal shots.
Orientation is also detected during playback, and in either orientation, the camera
automatically rotates images as needed.
However, the orientation may not be detected correctly when the camera is pointed
straight up or down.
Battery Level
An on-screen icon or message indicates the battery charge level.
Display
Details
Sufficient charge
Slightly depleted, but sufficient
(Blinking red) Nearly depleted—charge the battery soon
[Change the battery pack.]
Depleted—charge the battery immediately
Download from Www.Somanuals.com. All Manuals Search And Downloa2d2. 3
On-Screen Information
Playback (Detailed Information Display)
Switch display (RGB
Exposure compensation
level (p. 93), Exposure
Battery level (p. 223)
Metering method (p. 94)
Folder number - File
Current imagTota
no. of images
Shutte(sll
quality / Frme rate
Aperture value (pp. 125,
exposure compensation
Focusing range (pp. 105,
File size
Still images: Resolution
Movies: Movie length
Compression (image
Red-eye correction
White balance correction
(p. 101), Mercury lamp
Playback speed (p. 75)
Shooting mode (p. 226)
Transferred via Eye-Fi
Shooting date/time
High-speed burst HQ
22D4ownload from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Information
Summary of Movie Control Panel in “Viewing” (p. 136)
Exit
Play
Slow Motion (To adjust the playback speed, press the qr buttons or turn the 7
dial. No sound is played.)
Skip Backward* (To continue skipping backward, keep holding down the m
button.)
Previous Frame (For fast-rewind, keep holding down the m button.)
Next Frame (For fast-forward, keep holding down the m button.)
Skip Forward* (To continue skipping forward, keep holding down the m
button.)
*
Shown when the camera is connected ta ictBridge-compatible printer
(p. 202).
c
* Displays the frame approx. 4 sec. e or fter the current frame.
• To skip forward or back durie playback, press the qr buttons.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d2. 5
Functions and Menu Tables
Functions Available in Each Shooting Mode
Shooting Mode
K
A
D B M
G
I
J
V
Function
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Exposure Compensation (p. 93)
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
—
—
{
{
—
{
—
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
—
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
{
{
{
{
—
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
—
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
{
—
{
{
{
—
{
{
{
{
{
{
—
—
{
{
—
{
{
{
{
—
{
{
—
—
{
{
{
{
—
—
{
{
—
{
{
—
—
—
—
—
—
{
{
{
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
—
—
{
{
—
{
{
—
—
—
—
—
—
—
{
—
—
—
{
{
{
{
{
{
ISO Speed (p. 95)
–
White Balance Correction (p. 101)
h
Z
!
*3
4
5
*
*
{
{
—
—
—
—
—
—
—
{
—
—
—
—
{
{
{
{
{
{
{
—
—
—
—
—
—
{
{
{
{
—
{
{
{
{
{
{
Metering Method (p. 94)
Shutter Speed (p. 124)
Aperture Value (p. 125)
Program Shift (p. 93)
{
—
{
1
*
1
*
1
*
1
*
{
{
1
*
1
*
1
*
1
*
1
*
AE Lock (Movie)/Exposure Shift (p. 88)
AF Lock (when registered to the
/AF ock
Change AF Frame Position (p. 110)
Change AF Frame Size (p. 110)
Face Select (p. 113)
{
{
{
1
*
1
*
1
*
Off
{
1
*
1
*
1
*
Screen Display (p. 39)
Display 1
Display 2
FUNC. Menu
1
1
1
1
1
1
*
*
*
*
*
*
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
{
{
—
—
{
{
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
1
1
1
1
DR Correction (p. 98)
Shadow Correct (p. 99)
*
*
*
*
*1 The available settings depend on the registered shooting modes. *2 Detailed settings not available.
*3 Fixed to ! when the flash is lowered, but selectable when the flash is raised.
22D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Functions and Menu Tables
K
E
x
T
E
Y
w
S
O
P
t
v
{
{
—
—
—
{
{
{
{
—
—
—
—
{
{
{
—
—
—
—
—
—
{
{
{
{
—
—
—
—
—
{
{
—
—
—
—
—
—
—
{
—
—
—
—
—
{
—
{
{
{
{
—
—
{
{
—
{
{
—
—
—
—
—
—
—
{
—
—
—
—
{
—
—
{
—
{
{
—
—
{
{
—
{
{
—
—
—
—
—
—
—
{
—
—
—
—
{
—
—
{
—
{
{
—
—
{
{
—
{
{
—
—
—
—
—
—
—
{
—
—
—
—
{
—
—
{
—
{
{
—
—
—
—
—
{
{
—
—
—
—
—
—
{
{
{
{
—
{
{
{
{
{
{
{
{
—
—
—
—
—
{
{
—
—
—
—
—
—
{
{
{
{
—
—
—
—
—
{
{
{
{
{
—
{
{
—
—
{
{
—
{
{
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
—
{
{
—
—
—
—
—
—
{
{
—
{
{
{
{
{
{
{
{
—
—
—
—
—
{
{
—
—
—
—
—
—
—
—
—
—
—
{
{
{
—
{
—
—
—
—
—
{
{
—
—
—
—
—
{
{
{
{
—
—
{
—
—
{
—
{
{
—
—
{
{
—
{
{
—
—
—
—
—
—
{
{
{
{
—
{
{
{
—
{
{
{
{
—
—
{
{
—
{
{
—
—
—
—
—
{
{
{
{
—
—
—
—
—
{
{
{
{
—
—
{
{
—
{
{
—
—
—
—
—
—
{
{
{
{
—
—
—
—
—
{
—
{
{
—
—
{
{
—
{
{
—
—
—
—
—
—
{
{
{
{
—
{
{
—
—
{
{
{
{
—
—
{
{
—
{
{
—
—
—
—
—
—
{
{
{
{
—
{
{
{
—
{
{
{
{
—
—
{
{
—
{
{
—
—
—
—
—
—
{
{
{
{
—
{
{
{
—
{
{
—
{
—
—
{
{
—
{
{
—
—
—
—
—
—
{
{
{
{
—
{
{
{
—
{
{
—
{
—
—
{
{
—
{
{
—
—
—
—
—
—
{
{
{
{
—
{
{
{
—
{
—
—
{
—
—
—
—
—
{
{
—
—
—
—
—
{
{
{
{
{
—
{
{
—
—
{
{
—
{
—
—
—
—
—
{
{
—
—
—
—
—
{
{
{
{
{
—
{
{
—
—
{
{
{
—
—
{
{
—
{
{
—
—
—
—
—
—
{
{
{
{
—
{
{
{
{
{
{
2
*
{
{
—
{
{
—
—
—
—
—
—
{
{
{
—
{
{
{
{
{
{
FUNC. Menu
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
—
{
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
{
—
—
{
—
—
—
—
—
—
—
—
—
—
—
*4 Not available, but switches to Z in some cases. *5 Not available, but switches to Z when the flash fires.
{ Selectable, or set automatically. — Not selectable.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d2. 7
Functions and Menu Tables
Shooting Mode
K
A
D B M
G
I
J
V
Function
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
—
{
{
{
{
{
{
{
{
—
—
—
—
{
{
—
—
—
—
{
{
—
—
—
—
{
White Balance (p. 100)
h
S
*2
*
3
My Colors (p. 102)
*
3
*1
*1
{
{
{
{
—
{
—
—
—
*4
*1
*1
*1
*1
*1
*1
*1
1
1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
1
*1
*1
*1
*1
*1
*1
*1
{
—
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
—
—
{
—
—
{
{
{
{
{
{
—
—
—
{
{
—
—
{
—
—
{
{
{
{
{
—
{
—
{
{
{
—
—
{
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
{
{
{
—
—
—
{
Drive Mode (p. 104)
W
*5
]
[
$
Self-Timer (p. 52)
Delay
Self-Timer Settings (p. 53)
*
Shots
Flash Exposure Compensation (p. 117)
Flash Output Level (p. 127)
ND Filter (p. 99)
*1
*1
Still Image Aspect Ratio (p. 56)
Image Type (p. 119)
{
{
{
{
{
—
{
{
{
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
Resolution (p. 57)
Compression (p. 58)
Movie Quality (p. 60)
*1 The available settings depend on the registered shooting modes. *2 Not available in x or v.
*3 White balance is not available. *4 Set in a range of 1 – 5: contrast, sharpness, color saturation, red, green, blue,
and skin tone. *5 is set with , AF lock, or t.
22D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Functions and Menu Tables
K
E
x
T
E
Y
w
S
O
P
t
v
{
{
{
{
{
{
{
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
—
{
{
—
—
—
—
{
{
{
—
—
—
{
{
{
—
—
—
—
{
{
—
—
—
—
{
{
—
—
—
—
{
{
—
—
—
—
{
{
—
—
—
—
{
{
—
—
—
—
{
{
—
—
—
—
{
{
—
—
—
—
{
{
—
—
—
—
{
{
—
—
—
—
{
{
—
—
—
—
{
{
—
—
—
—
{
{
{
—
{
{
{
{
{
—
{
{
{
—
—
—
—
{
—
{
{
{
—
—
—
—
—
—
—
{
—
—
—
—
—
—
—
—
—
{
{
{
—
—
{
—
{
{
—
—
—
—
—
—
—
—
{
{
—
—
{
—
—
{
—
—
—
—
—
—
—
—
{
{
—
—
{
—
—
{
—
—
—
—
—
—
—
—
{
{
—
—
{
—
—
{
—
—
—
—
—
—
—
—
{
{
—
—
—
{
—
{
—
—
—
—
—
—
—
—
{
{
—
—
{
—
—
{
{
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
—
—
—
{
{
—
—
{
—
—
{
{
{
—
—
—
—
{
{
—
—
{
—
—
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
{
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
{
—
—
{
{
{
{
{
—
—
—
{
{
{
—
—
{
—
—
{
{
{
{
{
—
—
—
{
{
*8
{
{
{
{
—
—
{
{
{
{
{
—
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
{
—
{
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
—
{
—
—
*9
*9
*6 Cannot be set to 0 seconds in modes without selection of the number of shots. *7 One shot (cannot be modified)
in modes without selection of the number of shots.
*8 Only
and
{ Selectable, or set automatically. — Not selectable.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d2. 9
Functions and Menu Tables
4 Shooting Menu
Shooting Mode
K
A
D B M
G
I
J
V
Function
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
Face AiAF
Tracking AF
FlexiZone/Center*
Standard
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
*2
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
2
—
{
{
Off
Digital Zoom (pp. 51, 107)
Digital Tele-converter
1.5x/1.9x
*1
*1
{
{
{
{
—
—
—
—
—
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
On
Off
On
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
—
{
{
—
{
—
{
{
—
{
—
{
{
—
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
—
—
{
{
{
—
{
—
{
{
AF-Point Zoom (p. 63)
Servo AF (p. 112)
4
Off*
On
Off
On
Off
On
Off
On
Off
Continuous AF (p. 113)
AF-assist Beam (p. 65)
MF-Point Zoom (p. 106)
Safety MF (p. 106)
Auto
Flash
*1
*1
Mode
Manual
{
{
{
—
—
—
—
—
—
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
Flash Exp. Comp
Flash Output
—
{
{
{
{
{
{
{
—
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
—
{
{
{
{
{
{
{
{
{
{
{
—
—
{
—
{
{
{
{
{
—
—
—
—
{
—
{
{
{
{
{
{
{
{
{
{
—
—
—
{
—
{
{
{
{
{
—
—
—
—
—
—
{
—
{
{
{
{
{
—
—
—
—
—
—
{
—
{
{
{
{
{
—
—
—
—
1st-curtain
Shutter
Sync.
2nd-curtain
On
Off
On
Off
On
Off
Red-Eye
Corr.
Red-Eye
Lamp
Safety
FE
Max ISO Speed
High ISO NR (p. 96)
Rate of Change
Low / Standard / High
23D0ownload from Www.Somanuals.com. All Manuals Search And Download.
Functions and Menu Tables
K
E
x
T
E
Y
w
S
O
P
t
v
—
—
{
—
{
{
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
{
{
—
{
{
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
—
—
—
{
{
{
{
—
{
—
—
{
—
{
—
—
—
—
{
{
—
{
—
{
{
{
{
—
{
{
{
{
—
{
{
{
{
—
{
{
{
{
—
{
{
—
{
{
{
{
—
{
{
{
{
{
{
{
—
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
{
—
{
—
—
{
—
{
—
{
—
{
{
—
{
{
—
{
—
—
{
—
{
{
{
{
—
{
{
—
{
{
—
{
—
{
{
{
{
—
{
{
—
{
{
—
{
—
{
{
{
{
—
{
{
—
{
{
{
{
{
{
—
—
{
—
{
{
{
{
{
—
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
{
—
{
—
—
{
—
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
{
{
{
{
{
—
{
{
{
{
—
{
—
{
{
{
{
{
—
{
{
{
{
—
{
—
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
{
{
—
{
{
—
{
{
{
—
—
{
—
{
{
—
{
{
—
{
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
—
{
{
{
{
{
—
—
—
—
—
—
{
—
{
{
{
{
{
—
—
—
—
—
—
{
—
{
{
{
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
—
{
{
{
{
{
—
—
—
—
—
—
{
—
{
{
{
{
{
—
—
—
—
—
—
{
—
{
{
{
{
{
—
—
—
—
—
—
{
—
{
{
{
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
—
—
{
{
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
—
—
{
{
{
{
—
—
—
—
—
—
{
—
—
{
{
{
{
—
—
—
—
—
—
{
—
—
{
{
{
{
—
—
—
—
—
—
{
—
—
{
{
{
{
—
—
—
—
—
—
{
—
—
{
{
{
{
—
—
—
—
—
—
{
—
—
{
{
{
{
—
—
—
—
—
—
{
—
—
{
{
{
{
—
—
—
—
—
—
{
—
—
{
{
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{ Selectable, or set automatically. — Not selectable.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d3. 1
Functions and Menu Tables
Shooting Mode
K
D B M
G
A
I
J
V
Function
Hg Lamp Corr. (p. 59)
On/Off*
—
*1
—
*1
—
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
—
{
—
—
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
Center
Safety Shift (p. 125)
Wind Filter (p. 61)
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
AF Point
On
Off
On
Off
Off
2 sec.
Review (p. 66)
3 – 10 sec.
Hold
Off
Review Info (p. 66)
Detailed
Focus Check
On
Blink Detection (p. 64)
Off
ShootinInfo
Grid Lins
Electronic eve
Histogram
On
Reverse Disp. (p. 17)
Off
Off
IS Mode Continuous
Shoot Only
IS Settings (p. 120)
On
Off
Powered
IS
Off
Date Stamp (p. 54)
Date
Date & Time
Set Shortcut button (p. 131)
Save Settings (p. 132)
{
{
*1 The available settings depend on the registered shooting modes. *2 Only available by pressing the o button
(p. 108).
*3 [FlexiZone] in G, M, B and D modes, and [Center] in all other modes.
23D2ownload from Www.Somanuals.com. All Manuals Search And Download.
Functions and Menu Tables
K
E
x
T
E
Y
w
S
O
P
t
v
—
—
—
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
—
{
{
{
{
{
{
{
—
—
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
—
{
—
{
—
—
—
{
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
—
—
—
—
—
{
—
—
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
—
—
—
—
—
{
{
{
—
—
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
—
{
{
{
—
—
—
{
—
—
—
—
—
{
{
{
—
—
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
—
{
{
{
—
—
—
{
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
*4 [On] when subject movement is detected in A mode.
{ Selectable, or set automatically. — Not selectable.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d3. 3
Functions and Menu Tables
3 Set up Menu
Item
Ref. Page
Item
Ref. Page
Mute
Time Zone
Date/Time
Volume
Sound Options
Hints & Tips
Distance Units
Electronic Level
Video System
Ctrl via HDMI
Eye-Fi Settings
Copyright Info
Language
LCD Brightness
Start-up Image
Format
File Numbering
Create Folder
Lens Retract
Power Saving
Reset A
My Menu Menu
Item
Ref. Page
My Menu settings
23D4ownload from Www.Somanuals.com. All Manuals Search And Download.
Functions and Menu Tables
1 Playback Menu
Item
Movie Digest Playback
Smart Shuffle
Slideshow
Ref. Page
Item
Red-Eye Correction
Trimming
Ref. Page
Resize
Erase
My Colors
Protect
Scroll Display
Group Images
Auto Rotate
Resume
Rotate
Favorites
My Category
i-Contrast
Transition
2 Print Menu
Item
Print
Ref.
—
Item
Select All Images
Clear All Selections
Print Settings
Ref. Page
Select Images & Qty.
Select Range
Download from Www.Somanuals.com. All Manuals Search And Downloa2d3. 5
Handling Precautions
•
•
The camera is a high-precision electronic device. Avoid dropping it or
subjecting it to strong impact.
Never bring the camera near magnets, motors, or other devices that
generate strong electromagnetic fields, which may cause malfunction or
erase image data.
•
•
•
•
If water droplets or dirt adheres to the camera or screen, wipe with a dry
soft cloth, such as an eyeglass cloth. Do not rub hard or apply force.
Never use cleaners containing organic solvents to clean the camera or
screen.
Use a blower brush to remove dust from the lens. If cleaning is difficult,
contact a Canon Customer Support Help Desk.
To prevent condensation from forming on the camera after sudden
temperature changes (when the camera is transferred from cold to warm
environments), put the camera in an airtight, resealable plastic bag and let
it gradually adjust to the temperature before removing it from the bag.
If condensation does form on the camera, stop using it immediately.
Continuing to use the camera in this state may damage it. Remove the
battery and memory card, and wait until the msture has evaporated
before resuming use.
•
23D6ownload from Www.Somanuals.com. All Manuals Search And Download.
Index
Focusing range
FUNC. menu
N
H
P
I
Images
R
L
M
S
Menu
Movies
Screen
cards
23D8ownload from Www.Somanuals.com. All Manuals Search And Download.
Index
Shooting
Z
Software
T
U
V
Viewing
W
Download from Www.Somanuals.com. All Manuals Search And Downloa2d3. 9
FCC Notice
(Digital Camera, Model PC1674 systems)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for Class B
digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit diffent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/Thniciafor help.
The cable with the ferrite core provided he gital camera must be used with this
equipment in order to comply with Class in Subpart B of Part 15 of the FCC
rules.
Do not make any changes or modicatins to the equipment unless otherwise specified
in the manual. If such changes or modifications should be made, you could be required
to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516) 328-5600
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian ICES-003.
To ensure proper operation of this product, use of genuine Canon
accessories is recommended.
USA and Canada only:
The Lithium ion/polymer battery that powers the product is
recyclable.
Please call 1-800-8-BATTERY for information on how to
recycle this battery.
24D0ownload from Www.Somanuals.com. All Manuals Search And Download.
For CA, USA only
Included lithium battery contains Perchlorate Material - special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
Battery Charger CB-2LC
IMPORTANT SAFETY INSTRUCTIONS-SAVE
THESE INSTRUCTIONS.
DANGER-TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.
For connection to a supply not in the U.S.A., use an attachment plug
adapter of the proper configuration for the power outlet, if needed.
Battery Charger CB-2LCE
The adapter can be used with a power supplbetween 100 and 240 V AC.
Contact your Canon dealer for informan abut plug adapter for overseas
use.
For U.S.A. customers only: Foas here 120 V AC power is not used,
you will need a special plug a
For only United States
Use a UL listed, 1.8-3m(-10f), Type SPT-2 or NTSPT-2, AWG no.18
power supply cord, rated for 125V 7A, with a non-polarized NEMA 1-15P
plug rated for 125V 15A.
Trademark Acknowledgments
•
•
•
The SDXC logo is a trademark of SD-3C, LLC.
This device incorporates exFAT technology licensed from Microsoft.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
The iFrame logo and the iFrame symbol are trademarks of Apple INC.
•
About MPEG-4 Licensing
This product is licensed under AT&T patents for the MPEG-4 standard and
may be used for encoding MPEG-4 compliant video and/or decoding
MPEG-4 compliant video that was encoded only (1) for a personal and
non-commercial purpose or (2) by a video provider licensed under the AT&T
patents to provide MPEG-4 compliant video.
No license is granted or implied for any other use for MPEG-4 standard.
* Notice displayed in English as required.
Download from Www.Somanuals.com. All Manuals Search And Downloa2d4. 1
Disclaimer
• Reprinting, transmitting, or storing in a retrieval system any part of this
guide without the permission of Canon is prohibited.
• Canon reserves the right to change the contents of this guide at any
time without prior notice.
• Illustrations and screenshots in this guide madiffer slightly from the
actual equipment.
• The above items notwithstanding, Caacceps no liability for
damages due to mistaken operof e products.
CDD-E451-020
© CANON INC. 2012
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Bissell Vacuum Cleaner 1699 User Manual
Black Box Network Card KV1308C User Manual
Black Box TV Converter Box 422 User Manual
Bosch Appliances Security Camera NBN 832 User Manual
Broan Bottle Warmer WPD29M User Manual
Brunton Boating Equipment V2 PRO User Manual
Butler Coffeemaker 645 060 User Manual
Butler Coffeemaker 645 067 User Manual
Canon Camera Lens EF300MM F28L IS USM User Manual
Casablanca Fan Company Outdoor Ceiling Fan 86UxxM User Manual