E
The “Software Start Guide” and “Quick Reference Guide” are
provided at end of this manual.
INSTRUCTION
MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Item Check List
Before starting, check that all the following items have been included
with your camera. If anything is missing, contact your dealer.
Battery Pack
LP-E10
Battery Charger
LC-E10/LC-E10E*
Camera
(with eyecup and body cap)
(with protective cover)
Wide Strap
nterface Cable
EW-200D
Software
Instruction
Manual
Camera
Instruction
Manual
EOS DIGITAL
Solution Disk
(Software CD-ROM)
Camera
Basic Instruction Manual
(CD-ROM)
(CD-ROM)
* Battery Charger LC-E10 or LC-E10E is provided. (The LC-E10E comes with a
power cord.)
If you purchased a Lens Kit, check that the lens is included.
Be careful not to lose any of the above items.
Software Instruction Manual
The software Instruction Manuals are included in the CD-ROM as
Software Instruction Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Conventions Used in this Manual
Icons in this Manual
<6>
: Indicates the Main Dial.
<V> <U>
<0>
: Indicates the <S> cross keys.
: Indicates the setting button.
0, 9, 7, 8 : Indicates that the respective function remains
active for 4 sec., 6 sec., 10 sec., or 16 sec.
respectively after you let go of the button.
* In this manual, the icons and markings indicating the camera’s buttons, dials,
and settings correspond to the icons and markings on the camera and on the
LCD monitor.
3 : Indicates a function which can be changed by pressing the
<M> button and changing the setting.
M
: If shown on the upper right of the pae, it indicates that the
(p.**) : Reference page number mre information.
: Tip or advice for better sng.
: Problem-solving avice
: Warning to prevent shooting problems.
: Supplemental information.
Basic Assumptions
All operations explained in this manual assume that the power switch
It is assumed that all the menu settings and Custom Functions are
set to the default.
For explanatory purposes, the instructions show the camera attached
with an EF-S18-55mm f/3.5-5.6 IS II lens.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Chapters
For first-time DSLR users, Chapters 1 and 2 explain the camera’s
basic operations and shooting procedures.
Introduction
Getting Started
1
Basic Shooting and Image Playback
2
Creative Shooting
3
Advanced Shooting
4
5
Shooting with the LCD Mitor Live View Shooting)
Shooting Movies
5
6
Handy Features
7
Image Playback
8
9
Printing Images
Customizing the Camera
Reference
10
12
13
Software Start Guide
Quick Reference Guide and Instruction Manual Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents at a Glance
Shooting
Shoot automatically
Shoot continuously
Freeze the action
Blur the action
Blur the background
Keep the background in sharp focus
Shoot in low light
p.77 (ISO speed setting)
Shoot without flash
Shoot movies
Image Quality
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Take many pictures
Focusing
Change the point of focus
Shoot a moving subject
Playback
Search for pictures quickly
Rate images
Prevent important mages
from accidental deletion
Delete unnecessary images
Printing
Print pictures easily
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Index to Features
Power
Image Quality
Battery
• Charging
Î p.26
Picture Style
White balance
Color space
• Installing/Removing
• Battery check
Î p.28
Î p.32
Î p.228
Î p.31
Power outlet
Auto power off
Image enhancement features
• Lens peripheral
Card
illumination correction
• Noise reduction
Inserting/Removing
Format
Î p.28
Î p.44
for long exposures
• Noise reduction
Release shutter without
card
for high ISO speeds
• Hghght tone priority
Î p.154
Lens
Attaching/Detaching
Zoom
Î p.35
Î p.36
Î p.37
AF mode
AF point selection
Manual focusing
Image Stabilizer
Basic Settings
Drive
Dioptric adjustment
Language
Î p.38
Î p.34
Î p.33
Î p.154
Î p.166
Drive modes
Continuous shooting
Self-timer
Date/Time
Beeper
Maximum burst
LCD Off/On
LCD brightness
adjustment
Shooting
Î p.155
ISO speed
Recording Images
Feature guide
Quick Control
Creative Auto
Program AE
Create/select a folder
File No.
Î p.156
Î p.158
Shutter-priority AE
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Index to Features
Aperture-priority AE
Manual exposure
Bulb
Î p.94
Î p.97
Î p.98
Playback
Image review time
Single image display
• Shooting information
display
Automatic Depth-of-field
AE
Î p.99
Metering mode
Î p.100
Index display
Image browsing
(Jump display)
Magnify
Exposure Adjustments
AEB
Î p.103
Î p.105
Rotate
AE lock
Ratings
Movie playback
Editing out movie’s
fir/last scene
Slidshow
Flash
Built-in flash
• Flash exposure
compensation
• FE lock
Î p.88
Î p.102
Viewing images on TV
Protect
External flash
Flash control
Erase
Quick Control
Live View Shooting
Printing
Live View shooting
Focusing
Î p.121
Î p.128
Î p.127
Î p.126
PictBridge
Print Order (DPOF)
Grid display
Quick Control
Customization
Shooting Movies
My Menu
Movie shooting
Sound recording
Grid display
Î p.139
Î p.148
Î p.148
Î p.144
Software
Install
Quick Control
Software Instruction
Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Contents
Conventions Used in this Manual...................................................................... 4
Chapters............................................................................................................ 5
Nomenclature.................................................................................................. 18
Setting the Date and Time............................................................................ 33
1 Fully Automatic Shooting........................................................................... 50
1 Full Auto Techniques................................................................................. 52
7 Disabling Flash.......................................................................................... 54
C Creative Auto Shooting ............................................................................. 55
2 Shooting Portraits....................................................................................... 58
3 Shooting Landscapes................................................................................ 59
4 Shooting Close-ups.................................................................................... 60
5 Shooting Moving Subjects......................................................................... 61
6 Shooting Portraits at Night ......................................................................... 62
Q Quick Control............................................................................................. 63
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Contents
Shoot by Lighting or Scene Type.....................................................................67
x Image Playback..........................................................................................70
d: Program AE................................................................................................72
Z: Changing the ISO Speed .........................................................................77
S Selecting the AF Point ..............................................................................83
i Continuous Shooting ..................................................................................86
j Using the Self-timer ....................................................................................87
D Using the Built-in Flash ............................................................................88
Depth of Field Preew.................................................................................96
a: Manual Exposure......................................................................................97
Auto Exposure Bracketing (AEB)...................................................................103
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Contents
z Menu Function Settings........................................................................... 127
k Shooting Movies...................................................................................... 140
Handy Features............................................................................................. 154
Card Reminder........................................................................................... 154
Appending Dust Delete Data......................................................................... 171
u/y Magnified View.................................................................................... 178
b Rotating the Image................................................................................... 179
Setting Ratings.............................................................................................. 180
k Enjoying Movies ...................................................................................... 184
k Playing Movies ........................................................................................ 186
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Contents
K Protecting Images ....................................................................................194
L Erasing Images .........................................................................................196
wPrinting......................................................................................................204
W Direct Printing with DPOF ........................................................................214
Setting Custom Functions..............................................................................216
Custom Function Settings..........................................................................218
Using a Household Power Outlet...................................................................228
F Using the Remote Switch...........................................................................229
Using Eye-Fi Cards........................................................................................230
Specifications.................................................................................................251
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Handling Precautions
Camera Care
This camera is a precision instrument. Do not drop it or subject it to physical
shock.
The camera is not waterproof and cannot be used underwater. If you
accidentally drop the camera into water, promptly consult your nearest
Canon Service Center. Wipe off any water droplets with a dry cloth. If the
camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Never leave the camera near anything having a strong magnetic field such
as a magnet or electric motor. Also avoid using or leaving the camera near
anything emitting strong radio waves such as a large antenna. Strong
magnetic fields can cause camera misoperation or destroy image data.
Do not leave the camera in excessive heat such as in a car in direct sunlight.
High temperatures can cause the camera to malfunction.
The camera contains precision electronic circuitry. Never attempt to
disassemble the camera yourself.
Use a blower to blow away dust on the lens, viewfinder, reflex mirror, and
focusing screen. Do not use cleaners that contan organic solvents to clean
the camera body or lens. For stubborn dirt, takhe camera to the nearest
Canon Service Center.
Do not touch the camera’s electrconcts with your fingers. This is to
prevent the contacts from corrodorroded contacts can cause camera
misoperation.
If the camera is suddenly rought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, first put the camera in a sealed plastic bag and let it adjust to
the warmer temperature before taking it out of the bag.
If condensation forms on the camera, do not use the camera. This is to avoid
damaging the camera. If there is condensation, remove the lens, card and
battery from the camera, and wait until the condensation has evaporated
before using the camera.
If the camera will not be used for an extended period, remove the battery
and store the camera in a cool, dry, well-ventilated location. Even while the
camera is in storage, press the shutter button a few times once in a while to
check that the camera is still working.
Avoid storing the camera where there are corrosive chemicals such as a
darkroom or chemical lab.
If the camera has not been used for an extended period, test all its functions
before using it. If you have not used the camera for some time or if there is
an important shoot coming up, have the camera checked by your Canon
dealer or check the camera yourself and make sure it is working properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Handling Precautions
LCD Monitor
Although the LCD monitor is manufactured with very high precision
technology with over 99.99% effective pixels, there might be a few dead
pixels among the remaining 0.01% or less pixels. Dead pixels displaying
only black or red, etc., are not a malfunction. They do not affect the images
recorded.
If the LCD monitor is left on for a prolonged period, screen burn-in may occur
where you see remnants of what was displayed. However, this is only
temporary and will disappear when the camera is left unused for a few days.
In low or high temperatures, the LCD monitor display may seem slow or it
might look black. It will return to normal at room temperature.
Cards
To protect the card and its recorded data, note the following:
Do not drop, bend, or wet the card. Do not subject it to excessive force,
physical shock, or vibration.
Do not touch the card’s electronic contacts ith your fingers or anything
metallic.
Do not store or use the card near ang hving a strong magnetic field
such as a TV set, speakers, or magAlso avoid places prone to having
static electricity.
Do not leave the card n direcght or near a heat source.
Store the card in a cae.
Do not store the card in hot, dusty, or humid locations.
Lens
After detaching the lens from the camera, attach the lens
caps or put down the lens with the rear end up to avoid
scratching the lens surface and electrical contacts.
Contacts
Cautions During Prolonged Use
If you use continuous shooting, Live View shooting, or
movie shooting for a prolonged period, the camera may
become hot. Although this is not a malfunction, holding the
hot camera for a long period can cause slight skin burns.
About smudges adhering to the front of the sensor
Besides dust entering the camera from outside, in rare cases lubricant from the
camera’s internal parts may adhere to the front of the sensor. If visible spots
remain on the image, having the sensor cleaned by a Canon Service Center is
recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Quick Start Guide
Insert the battery. (p.28)
1
Insert the card. (p.28)
With the card’s label facing toward
the camera back, insert it into the
slot.
2
White index
Red index
Alie lens’ white or red index
ith e camera’s index in the
ching color.
3
4
5
Set the lens focus mode switch
to <AF>. (p.35)
Set the power switch to <1>.
When the LCD monitor displays the
Date/Time setting screen, see page
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Quick Start Guide
Set the Mode Dial to <1> (Full
Auto). (p.50)
All the necessary camera settings
6
7
will be set automatically.
Focus the subject. (p.39)
Look through the viewfinder and
aim the viewfinder center over the
subject.
Press the shutter button halfway,
and the camera will focus the
subject.
If necesary, the built-in flash will
up automatically.
ke the picture. (p.39)
Press the shutter button completely
to take the picture.
8
9
Review the picture. (p.154)
The captured image will be
displayed for approx. 2 sec. on the
LCD monitor.
To display the image again, press
To shoot while looking at the LCD monitor, see “Live View
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Nomenclature
The names in bold indicate the parts mentioned up until the “Basic
Shooting and Image Playback” section.
Built-in flash/AF-assist beam
Mode Dial (p.22)
Power switch (p.31)
EF Lens mount index (p.35)
EF-S Lens mount index (p.35)
Flash-sync contacts
<D> Flash
<6> Main Dial
<V> Focal plane
mark (p.60)
Shutter button
Strap mount
Microphone
Red-eye
reduction/
Self-timer
lamp (p.89/87)
Grip
Terminal
cover
Contacts (p.15)
Lens mount
Lens lock pin
Lens release button
Remote control
HDMI mini OUT
Body cap (p.35)
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Nomenclature
<O/L> Aperture/Exposure
compensation button/
<B> Display button
<A/I> AE lock/
FE lock button/Index/
Reduce button
Dioptric adjustment knob (p.38)
Viewfinder eyepiece
<S/u>
AF point selection
button/
Magnify button
Speaker
LCD monitor
DC cord
hole
<A> Live View shooting/
Movie shooting button
Card/Battery
compartment cover (p.28)
<Q/l>
Quick Control button/
Access lamp (p.30)
Card/Battery compartment
cover release lever (p.28)
Tripod socket
<WZ>
<XB>
Card slot (p.28)
Battery compartment (p.28)
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Nomenclature
Shooting Settings Display (in Creative Zone modes, p.22)
Shutter speed
Aperture
Auto Lighting Optimizer (p.107)
Shooting mode
Exposure level
indicator
Exposure
compensation
amount (p.101)
ISO speed (p.77)
Highlight tone priority (p.220)
yFlash exposure
compensation (p.102)
AEB range (p.103)
Picture Style (p.79)
0 External flash
exposure compensation
AF mode (p.81)
X
Raise built-in flash (p.41)
One-Shot AF
9
AI Focus AF
Z
AI Servo AF
g
Manual Focusing
Quick Control icon
Image-recording quality
73
83
74
84
7a
8a
b
Large/Fine
Large/Normal
Medium/Fine
Medium/Normal
Small 1/Fine
Small 1/Normal
Small 2 (Fine)
Small 3 (Fine)
RAW
White balance (p.115)
QAuto
W Daylight
EShade
RCloudy
Y Tungsten light
U White fluorescent light
c
1
1+73RAW+Large/Fine
Number of possible shots
Number of possible shots
during WB bracketing
Self-timer countdown
I
Flash
O Custom
Battery check (p.32)
zxcn
Metering mode (p.100)
q
Evaluative metering
Drive mode (p.86,87)
wPartial metering
eCenter-weighted average metering
u
i
j
Single shooting
Continuous shooting
Self-timer:10 sec
(Displayed if an Eye-Fi card is used.)
l Self-timer:2 sec
q Self-timer:Continuous
The display will show only the settings currently applied.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Nomenclature
Viewfinder Information
AF point activation indicator < >
AF points
Focusing screen
<Z>
ISO speed
<2>
White balance
correction
<A> AE lock/
<o> Focus
AEB in-progress
confirmation light
Max. burst
<D> Flash-ready
Improper FE lock
warning
<
0
> Monochrome shooting
ISO speed
<e> High-speed sync
(FP flash)
<A> Highlight tone priority
<d> FE lock/
FEB in-progress
Exposure level indicator
Exposure compensation amount
AEB range
<y> Flash exposure
compensation
Red-eye reduction lamp-on indicator
Aperture
Card full warning (FuLL)
Card error warning (Card)
No card warning (Card)
Shutter speed
FE lock (FEL)
Busy (buSY)
Built-in flash recycling (D buSY)
The display will show only the settings currently applied.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Nomenclature
Mode Dial
The Mode Dial includes the Basic Zone modes, Creative Zone modes,
and the Movie shooting mode.
Creative Zone
These modes give you more control for
shooting various subjects.
d
s
f
a
8: Automatic depth-of-field AE
Basic Zone
All you do is press the shutter button.
The camera sets everything to suit the
subject.
k: Movie shooting
Image Zone
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Nomenclature
Battery Charger LC-E10
Charger for Battery Pack LP-E10 (p.26).
Power plug
Charge lamp
Full-charge lamp
Battery pack slot
Battery Charger LC-E10E
Charger for Battery Pack LP-E10 (p.26).
Battery pack slot
Power cord
Full-charge lamp
Charge lamp
Power cord socket
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Getting Started
This chapter explains preparatorstepbefore you start
shooting and basic camera opeons.
Attg the Strap
Pass the end of the strap through
the camera’s strap mount eyelet
from the bottom. Then pass it
through the strap’s buckle as shown
in the illustration. Pull the strap to
take up any slack and make sure
the strap will not loosen from the
buckle.
The eyepiece cover is also
Eyepiece cover
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Charging the Battery
Remove the protective cover.
Detach the protective cover provided
1
2
3
with the battery.
Attach the battery.
As shown in the illustration, attach the
battery securely to the charger.
To detach the battery, follow the
above procedure in reverse.
LC-E10
Recharge the battery.
For LC-E10
As shown bthe arrow, flip out the
batthargr’s prongs and insert
prngs into a power outlet.
Fo-E10E
LC-E10E
Connect the power cord to the
charger and insert the plug into the
power outlet.
X Recharging starts automatically and
the charge lamp turns orange.
X When the battery is fully recharged,
the full-charge lamp will turn green.
It takes approx. 2 hours to fully recharge a completely exhausted
battery at 23 C / 73 F. The time required to recharge the battery
epends on the ambient temperature and the battery’s charge
level.
°
°
d
For safety reasons, recharging in low temperatures (6°C - 10°C /
43°F - 50°F) will take a longer time (up to 4 hours).
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Charging the Battery
Tips for Using the Battery and Charger
Upon purchase, the battery is not fully charged.
Recharge the battery before using.
Recharge the battery on the day before or on the day it is to be
used.
Even during storage, a charged battery will gradually drain and lose
its power.
After recharging the battery, detach it and unplug the charger
from the power outlet.
When not using the camera, remove the battery.
If the battery is left in the camera for a prolonged period, a small
amount of power current is released, resulting in excess discharge
and shorter battery life. Store the battewith the protective cover
(provided) attached. Storing the ery ater it is fully charged can
lower the battery’s performe.
The battery charger can abe used in foreign countries.
The battery charger is compatible with a 100 V AC to 240 V AC 50/
60 Hz power source. If necessary, attach a commercially-available
plug adapter for the respective country or region. Do not attach any
portable voltage transformer to the battery charger. Doing so can
damage the battery charger.
If the battery becomes exhausted quickly even after being fully
charged, the battery has reached the end of its service life.
Purchase a new battery.
After disconnecting the charger’s power plug, do not touch the prongs for
at least 3 sec.
Do not charge any battery other than a Battery Pack LP-E10.
The Battery Pack LP-E10 is dedicated to Canon products only. Using it
with an incompatible battery charger or product may result in malfunction
or accidents for which Canon cannot be held liable.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Installing and Removing the Battery and Card
Load a fully-charged Battery Pack LP-E10 into the camera. The card
(sold separately) can be an SD, SDHC, or SDXC memory card. The
captured images are recorded onto the card.
Make sure the card’s write-protect switch is set upward to
enable writing/erasing.
Installing the Battery/Card
Open the cover.
Slide the lever as shown by the
1
arrows and open the cover.
Insert the battery.
2
Insert the ed with the battery
con
ert he battery until it locks in
e.
Isert the card.
Write-protect switch
3
As shown in the illustration, face
the card’s label side toward the
camera back.
Insert the card straight in all the way.
Close the cover.
Press the cover until it snaps shut.
4
When you set the power switch to
>, the number of possible shots
<
1
monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Installing and Removing the Battery and Card
After opening the card/battery compartment cover, be careful not to push it
back further. Otherwise, the hinge might break.
The number of possible shots depends on the remaining capacity of the
card, image-recording quality, ISO speed, etc.
Setting [1 Release shutter without card] to [Disable] will prevent you
from forgetting to insert a card (p.154).
Removing the Battery/Card
Set the power switch to <2>.
1
2
Open the cover.
Make sue the access lamp is off,
topethe cover.
If ecording ...” is displayed, close
e cover.
Remove the battery.
3
Press the battery release lever as
shown by the arrow and remove the
battery.
To prevent short circuiting of the
battery contacts, be sure to attach the
the battery.
Remove the card.
Gently push in the card, then let go.
4
The card will stick out.
Pull the card straight out.
Close the cover.
Press the cover until it snaps shut.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Installing and Removing the Battery and Card
When the access lamp is lit or blinking, it indicates that images are
being written to or read by the card, being erased, or data is being
transferred. When the access lamp is lit or blinking, do not open the
card/battery compartment cover and never do any of the following.
Otherwise, the image data may be destroyed or the card or camera
may be damaged.
• Removing the card.
• Removing the battery.
• Shaking or banging the camera around.
If the card already contains recorded images, the image number might
not start from 0001 (p.158).
Do not touch the card’s contacts with your fingers or metal objects.
If a card-related error message is displayed on the LCD monitor, remove
and reinsert the card. If the error persists, use a different card. If you can
transfer all the images on the card to a computer, transfer all the images
return to normal.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Turning on the Power
If the date/time setting screen appears when you turn on the power
<1> : The camera turns on.
<2> : The camera turns off and does
not operate. Set to this
position when not using the
camera.
3 About Auto Power Off
To save battery power, the camera turns off automatically after about
30 seconds of non-operation. To turn on the camera again, just
You can change the auto power-off timwith [5 Auto power off]
If you set the power switch to <2> while an image is being recorded to
the card, [Recording ...] will be displayed and the power will turn off after
the card finishes recording the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Turning on the Power
z Checking the Battery Level
When the power switch is set to <1>, the battery level will be
indicated in one of four levels:
z : Battery level is OK.
x : Battery level is less than half
full.
c : Battery will be exhausted soon.
(Blinks)
n : Battery must be recharged.
Battery Life
Temperature
No Flash
At 23°C / 73°
Approx. 8ots
Approx. 7ts
At 0°C / 32°F
Approx. 750 shots
Approx. 650 shots
50% Flash Use
The figures above are baseon fully-charged Battery Pack LP-E10, no Live
View shooting, and CIPA (Camera & Imaging Products Association) testing
standards.
The number of possible shots will decrease with any of the following
operations:
• Pressing the shutter button halfway for a prolonged period.
• Often activating only the AF without taking a picture.
• Using the LCD monitor often.
• Using the lens Image Stabilizer.
The lens operation is powered by the camera’s battery. Depending on
the lens used, the number of possible shots may be lower.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
3 Setting the Date and Time
When you turn on the power for the first time or if the date/time has
been reset, the Date/Time setting screen will appear. Follow steps 3
and 4 to set the date/time. Note that the date/time appended to
recorded images will be based on this date/time setting. Be sure to
set the correct date/time.
Display the menu screen.
1
Press the <M> button to display
the menu screen.
Under the [6] tab, select [Date/
2 Time].
Press th<U> key to select the
[6] tab.
Pthe V> key to select [Date/
Time], then press <0>.
the date and time.
3
Press the <U> key to select the
date or time number.
Press <0> so <a> is displayed.
Press the <V> key to set the
number, then press <0>. (Returns
to b.)
Exit the setting.
Press the <U> key to select [OK],
4
then press <0>.
X The date/time will be set.
If you store the camera without the battery or if the camera’s battery
becomes exhausted, the date/time might be reset. If this happens, set the
date/time again.
The date/time set will start from when you press <0> in step 4.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
3 Selecting the Interface Language
Display the menu screen.
1
Press the <M> button to display
the menu screen.
Under the [6] tab, select
2 [LanguageK].
Press the <U> key to select the
[6] tab.
Press the <V> key to select
[LanguageK] (the fourth item from
the top), then press <0>.
Set the desired language.
3
Press the <S> key to select the
language, then press <0>.
X The interface language will change.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Attaching and Detaching a Lens
Attaching a Lens
Remove the caps.
Remove the rear lens cap and the
1
body cap by turning them as shown
by the arrows.
White index
Attach the lens.
2
Align the lens’ red or white index with
the camera’s index matching the
same color. Turn the lens as shown
by the arrow until it snaps in place.
Red index
n tlens, set the focus mode
3 ch to <AF> (autofocus).
If it is set to <MF> (manual focus),
autofocus will not operate.
Remove the front lens cap.
4
Minimizing Dust
When changing lenses, do it in a place with minimal dust.
When storing the camera without a lens attached, be sure to attach the
body cap to the camera.
Remove dust on the body cap before attaching it.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Attaching and Detaching a Lens
About Zooming
To zoom, turn the zoom ring on the lens
with your fingers.
If you want to zoom, do it before
focusing. Turning the zoom ring after
achieving focus may throw off the
focus slightly.
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrows.
Turn the lens until it stops, then
detacit.
Attace rear lens cap to the
ched lens.
Do not look at the sun directly through any lens. Doing so may cause
loss of vision.
If the front part (focusing ring) of the lens rotates during autofocusing, do
not touch the rotating part.
Image Conversion Factor
Since the image sensor size is
smaller than the 35mm film
Image sensor size (Approx.)
(22.0 x 14.7mm / 0.87 x 0.58 in.)
format, it will look like the lens
focal length is increased by
approx. 1.6x.
35mm image size
(36 x 24 mm / 1.42 x 0.94 in.)
Download from Www.Somanuals.com. All Manuals Search And Download.
36
About the Lens Image Stabilizer
When you use the IS lens’ built-in Image Stabilizer, camera shake is
corrected to obtain a sharper shot. The procedure explained here is
based on the EF-S18-55mm f/3.5-5.6 IS II lens as an example.
* IS stands for Image Stabilizer.
Set the IS switch to <1>.
1
Set also the camera’s power switch to
<1>.
Press the shutter button halfway.
2
X The Image Stabilizer will operate.
Take the picture.
When thpicture looks steady in the
3
vinde, press the shutter button
copletely to take the picture.
The Image Stabilizer may not be effective if the subject moves at the time
of exposure.
The Image Stabilizer may not be effective for excessive shaking such as
on a rocking boat.
The Image Stabilizer can operate with the focus mode switch set to
either <f> or <g>.
If the camera is mounted on a tripod, you can save battery power by
switching the IS switch to <2>.
The Image Stabilizer is effective even when the camera is mounted on a
monopod.
Some IS lenses enable you to switch the IS mode manually to suit the
shooting conditions. However, the EF-S18-55mm f/3.5-5.6 IS II switches
the IS mode automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Basic Operation
Adjusting the Viewfinder Clarity
Turn the dioptric adjustment
knob.
Turn the knob left or right until the
nine AF points in the viewfinder look
sharp.
If the camera’s dioptric adjustment still cannot provide a sharp viewfinder
image, using Dioptric Adjustment Lens E (10 types, sold separately) is
recommended.
Holding the Camera
To obtain sharp images, hold the camera still o minimize camera
shake.
Horizontal shooting
Vertical shooting
1. Wrap your right hand around the camera grip firmly.
2. Hold the lens bottom with your left hand.
3. Press the shutter button lightly with your right hand’s index finger.
4. Press your arms and elbows lightly against the front of your body.
5. To maintain a stable stance, place one foot in front of the other.
6. Press the camera against your face and look through the viewfinder.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Basic Operation
Shutter Button
The shutter button has two steps. You can press the shutter button
halfway. Then you can further press the shutter button completely.
Pressing halfway
This activates autofocusing and the
automatic exposure system that sets the
shutter speed and aperture.
The exposure setting (shutter speed and
aperture) is displayed in the viewfinder
(0).
While you press the shutter button
halfway, the LCD monitor will turn off
Preng completely
is reases the shutter and takes the
re.
Preventing Camera Shake
Hand-held camera movement during the moment of exposure is called
camera shake. It can cause blurred pictures. To prevent camera shake,
note the following:
• Hold and steady the camera as shown on the previous page.
• Press the shutter button halfway to autofocus, then slowly press the
shutter button completely.
If you press the shutter button completely without pressing it halfway first
or if you press the shutter button halfway and then press it completely
immediately, the camera will take a moment before it takes the picture.
Even during the menu display, image playback, and image recording,
you can instantly go back to shooting-ready by pressing the shutter
button halfway.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Q Quick Control for Shooting Functions
You can directly select and set the shooting functions displayed on the
LCD monitor. This is called the Quick Control screen.
Press the <Q> button.
1
X The Quick Control screen will appear
(7).
Set the desired function.
2
Press the <S> key to select the
function to be set.
X The selected function and Feature
Turn the <6> dial to change the
settin
Basic Zone modes
eative Zone modes
Take the picture.
Press the shutter button completely to
take the picture.
3
X The captured image will be displayed.
For the functions settable in Basic Zone modes and the setting procedure,
see page 63.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Q Quick Control for Shooting Functions
Settable Functions on Quick Control Screen
White balance correction* (p.117)
Shutter speed (p.92)
Exposure compensation/
Highlight tone priority* (p.220)
Shooting mode*
Flash exposure
compensation (p.102)
Picture Style (p.79)
Raise built-in flash
Image-recording quality
White balance
Auto Lighting Optimizer
Metering mode (p.100)
hite balance bracketing*
(118)
Asterisked functions cannet with the Quick Control screen.
When you select <s> ans <0>, the built-in flash will pop-up.
Function Setting Screen
Select the desired function and press
<0>. The function’s setting screen
will appear.
Press the <U> key or turn the
<6> dial to change the setting.
There are also functions to be set
with the <B> button.
Ð <0>
Press <0> to finalize the setting and
to return to the Quick Control screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
3 Menu Operations
With menus, you can set various functions such as the image-recording
quality, date/time, etc. While looking at the LCD monitor, use the
<M> button, <S> cross keys, and <0> button on the camera
back to operate the menus.
<0> button
<S> Cross keys
<M> button
LCD monitor
Menu Screen
In the Basic Zone, Movie shooting moand reative Zone, the tabs
and menu options displayed will bdiffnt.
Basic Zone modes
Movie shooting mode
Creative Zone modes
5 Set-up
3 Playback
1 Shooting
9 My Menu
Tab
Menu settings
Menu items
Download from Www.Somanuals.com. All Manuals Search And Download.
42
3 Menu Operations
Menu Setting Procedure
Display the menu screen.
Press the <M> button to display
1
the menu screen.
Select a tab.
Press the <U> key to select a
2
3
menu tab.
Select the desired item.
Press the <V> key to select the
item, then press <0>.
lethe setting.
4
ress the <V> or <U> key to
select the desired setting. (Some
settings require you to press either
the <V> or <U> key to select it.)
The current setting is indicated in
blue.
Set the desired setting.
Press <0> to set it.
5
6
Exit the setting.
Press the <M> button to return
to the shooting settings display.
In Step 2, you can also turn the <6> dial to select a menu tab.
The explanation of menu functions hereinafter assumes that you have
pressed the <M> button to display the menu screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
3 Formatting the Card
If the card is new or was previously formatted by another camera or
computer, format the card with the camera.
When the card is formatted, all images and data in the card will
be erased. Even protected images will be erased, so make
sure there is nothing you need to keep. If necessary, transfer
the images to a computer, etc., before formatting the card.
Select [Format].
Under the [5] tab, select [Format],
1
then press <0>.
Format the card.
2
SeleOK], hen press <0>.
X he cd will be formatted.
X n the formatting is completed,
menu will reappear.
For low-level formatting, press the
<L> button to checkmark [Low level
format] with <X>, then select [OK].
Download from Www.Somanuals.com. All Manuals Search And Download.
44
3 Formatting the Card
Execute [Format] in the following cases:
The card is new.
The card was formatted by a different camera or a computer.
The card is full with images or data.
About Low-level Formatting
Do low-level formatting if the card’s recording or reading speed seems slow
or if you want to totally erase all data in the card.
Since low-level formatting will erase all recordable sectors in the card, the
formatting will take slightly longer than normal formatting.
You can stop the low-level formatting by selecting [Cancel]. Even in this
case, normal formatting will have been completed and you can use the
card as usual.
When the card is formatted or data is erased, only the file management
information is changed. The actual data is not completely erased. Be
aware of this when selling or discarding the card. When discarding the
card, execute low-level formatting or destroy the card physically to
prevent the data from being leaked.
Before using a new Eye-Fi card, the software in the card must be
installed in your computer. Then format the card with the camera.
The card capacity displayed on the card format screen might be smaller
than the capacity indicated on the card.
This device incorporates exFAT technology licensed from Microsoft.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Switching the LCD Monitor Display
The LCD monitor can display the shooting settings screen, menu
screen, captured images, etc.
Shooting Settings
When you turn on the power switch,
the shooting settings will be
displayed.
When you press the shutter button
halfway, the display will turn off.
And when you let go of the shutter
button, the display will turn on.
You can also turn off the display by
pressing the <B> button. Press
the button again to turn on the
display.
Menu Function
Captured Image
Appears when you press the
<M> button. Press the
button again to return to the
shooting settings screen.
Appears when you press the
<x> button. Press the button
again to return to the shooting
settings screen.
You can set [6 LCD off/on btn] so that the shooting settings display
does not keep turning off and on (p.166).
Even when the menu screen or captured image is displayed, pressing
the shutter button will enable you to shoot immediately.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Feature Guide
The Feature guide is a simple description of the respective function or
option. It is displayed when you change the shooting mode or use the
Quick Control screen to set a shooting function, Live View shooting,
movie shooting, or playback. When you select a function or option on
the Quick Control screen, the Feature guide description is displayed.
The Feature guide turns off when you further proceed with any
operation.
Shooting mode (Sample)
Quick Control (Sample)
Shooting function
Live View shooting
Playback
3 Disabling the Feature Guide
Select [Feature guide].
Under the [6] tab, select [Feature
guide], then press <0>. Select
[Disable], then press <0>.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Shooting and
Image Playback
This chapter explains how to use he Bsic Zone modes
on the Mode Dial for best resultnd how to playback
images.
With Basic Zone mode, all you do is point and shoot and the
camera sets everything automatically (p.63, 232). Also, to
prevent botched pictures due to mistaken operations, major
shooting settings cannot be changed in fully-automatic modes.
About the Auto Lighting Optimizer
In Basic Zone modes, the Auto Lighting Optimizer (p.107) will
adjust the image automatically to obtain the optimum brightness
and contrast. It is also enabled by default in Creative Zone modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
49
1 Fully Automatic Shooting
Set the Mode Dial to <1>.
1
AF point
Aim any AF point over the
2 subject.
All the AF points will be used to focus,
and generally the closest object will
be focused.
Aiming the center AF point over the
subject will make focusing easier.
Focus the subject.
3
Press the sutter button halfway, and
the lens focsing ring will rotate to
focu
X dinside the AF point achieving
s flashes briefly in red. At the
same time, the beeper will sound and
the focus confirmation light <o> in
the viewfinder will light.
X If necessary, the built-in flash will pop-
up automatically.
Focus confirmation light
Take the picture.
Press the shutter button completely to
4
take the picture.
X
The captured image will be displayed
for approx. 2 sec. on the LCD monitor.
If the built-in flash has popped up,
you can push it back down with your
fingers.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
1 Fully Automatic Shooting
FAQ
The focus confirmation light <
o
> blinks and focus is not achieved.
Aim the AF point over an area having good contrast, then press the
move away and try again.
Sometimes multiple AF points flash simultaneously.
This indicates that focus has been achieved at all those AF points. When
the AF point covering the desired subject flashes, take the picture.
The beeper continues to beep softly. (The focus confirmation
light <o> does not light.)
It indicates that the camera is focusing continuously on a moving
subject. (The focus confirmation light <o> does not light.) You can
take sharp pictures of a moving subject
Pressing the shutter button halfway oes not focus the subject.
If the focus mode switch on the is seto <MF> (Manual Focus),
set it to <AF> (Auto Focu
Although it is daylght, thsh popped up.
For a backlit subjectthe ash may pop up to help lighten the
subject’s dark areas.
In low light, the built-in flash fired a series of flashes.
Pressing the shutter button halfway may trigger the built-in flash to
fire a series of flashes to assist autofocusing. This is called AF-assist
beam. Its effective range is about 4 meters/13.1 feet.
Although flash was used, the picture came out dark.
The subject was too far away. The subject should be within 5
meters/16.4 feet from the camera.
When flash was used, the bottom part of the picture came out
unnaturally dark.
The subject was too close to the camera, and a shadow was created
by the lens barrel. The subject should be at least 1 meter/3.3 feet
away from the camera. If a hood has been attached to the lens,
remove it before taking the flash picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
1 Full Auto Techniques
Recomposing the Shot
Depending on the scene, position the subject toward the left or right to
create a balanced background and good perspective.
In the <1> (Full Auto) mode, while you press the shutter button
halfway to focus a still subject, the focus will be locked. You can then
recompose the shot and press the shutter butn completely to take the
picture. This is called “focus lock”. Foock ialso possible in other
Basic Zone modes (except <5ort.
Shooting a Moving Sbject
In the <1> (Full Auto) mode, if the subject moves (distance to camera
changes) during or after you focus, AI Servo AF will take effect to focus
the subject continuously. As long as you keep aiming the AF point on
the subject while pressing the shutter button halfway, the focusing will
be continuous. When you want to take the picture, press the shutter
button completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
1 Full Auto Techniques
A Live View Shooting
By pressing the <A> button, you can shoot while viewing the image on
the camera’s LCD monitor. This is called Live View shooting. For
details, see page 121.
Display the Live View image on
the LCD monitor.
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
1
Focus the subject.
2
Aim the center AF point < > on the
subject.
Press thshutter button halfway to
f.
Wn focus is achieved, the AF point
ill urn green and the beeper will
ound.
X If necessary, the built-in flash will pop-
up automatically.
Take the picture.
Press the shutter button completely.
X The picture will be taken and the
captured image is displayed on the
LCD monitor.
3
X After the image review ends, the
camera will return to Live View
shooting automatically.
Press the <A> button to exit Live
View shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
53
7 Disabling Flash
In places where flash photography is prohibited, use the <7> (Flash
Off) mode. This mode is also effective for capturing the particular
ambience of a scene, such as candlelight scenes.
Shooting Tips
Prevent camera shake if the numeric display in the viewfinder
blinks.
Under low light when camera shake is prone to occur, the
viewfinder’s shutter speed display will blink. Hold the camera steady
or use a tripod. When using a zoom lens, use the wide-angle end to
reduce blur caused by camera shake.
Taking portraits without flash.
In low-light conditions, tell the subject to keep still until the picture is
taken. If the person moves during the exposure, he or she might look
blurred in the picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
C Creative Auto Shooting
Unlike the <1> Full Auto mode where the camera sets everything, the
<C> Creative Auto mode enables you to easily change the depth of
field, drive mode, and flash firing.
You can also choose the ambience you want to convey in your images.
The default setting is the same as the <1> (Full Auto) mode.
* CA stands for Creative Auto.
Set the Mode Dial to <C>.
1
Press the <Q> button. (7)
2
X The Quick Control screen will appear.
the desired function.
3
Press the <V> key to select a
function.
X The selected function and Feature
For details on setting each function,
see pages 56-57.
Take the picture.
Press the shutter button completely to
4
take the picture.
If you change the shooting mode or turn the power switch to <2>, the
function you have set on this screen will revert to the default setting.
However, the self-timer setting will be retained.
Download from Www.Somanuals.com. All Manuals Search And Download.
55
C Creative Auto Shooting
(1)
Shutter speed
Aperture
ISO speed
(2)
(3)
Battery check
Image-recording quality
Possible shots
Pressing the <Q> button enables you to set the following:
(1) Shoot by ambience selection
You can set the ambience you want coney in your images. Press
the <U> key or turn the <6> do select the desired
ambience. You can also seleom a list by pressing <0>. For
details, see page 64.
(2) Blurring/sharpening the bckground
If you move the index mark toward the left, the background will look
more blurred. If you move it toward the right, the background will
look more in focus. If you want to blur the background, see “Shooting
adjust it as desired.
Depending on the lens and shooting conditions, the background
might not look so blurred. This function cannot be set (grayed out) if
<r> has been set or if the built-in flash is raised with <a> set. If
flash is used, this setting will not be applied.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
C Creative Auto Shooting
(3)Drive mode/Flash firing
When you press <0>, the drive mode
or flash firing setting screens will appear.
Set as desired, then press <0> to
finalize the setting and return to the
Quick Control screen.
Drive mode: Press the <
<u> Single shooting : Shoot one image at a time.
Continuous shooting
U> key or turn the <6> dial to set it as desired.
<i
>
:
While you hold down the shutter button
completey, shs will be taken continuously.
You caoot uto about 3 shots per sec.
<j> Self-timer:10 sec: Tctue is taken 10 seconds after you
phe shutter button.
<q> Self-timer:Coninuous:
Press the <V> key to set the number of
multiple shots (2 to 10) to be taken with the
self-timer. 10 seconds after you press the
shutter button, the set number of multiple
shots will be taken.
Flash firing: Press the <U> key or turn the <6> dial to set it as
desired.
<a> Auto flash: The flash fires automatically when necessary.
<I>
Flash on : The flash fires at all times.
<b> Flash off : The flash is disabled.
If the image-recording quality is 1 or 1+73, the continuous
shooting speed will be max. approx. 2 fps and approx. 0.8 fps (averaged
value) respectively.
When using <j> or <q>, see the
notes on page 87.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
2 Shooting Portraits
The <2> (Portrait) mode blurs the background to make the human
subject stand out. It also makes skin tones and the hair look softer than
with the <1> (Full Auto) mode.
Shooting Tips
The further the distance btween the subject and background,
the better.
The further the distance between the subject and background, the
more blurred the background will look. The subject will also stand
out better in front of a plain, dark background.
Use a telephoto lens.
If you have a zoom lens, use the telephoto end to fill the frame with
the subject from the waist up. Move in closer if necessary.
Focus the face.
Check that the AF point covering the face flashes in red.
If you hold down the shutter button, you can shoot continuously to obtain
different poses and facial expressions. (Up to approx. 3 shots per sec. in
JPEG quality.)
If necessary, the built-in flash will pop up automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
3 Shooting Landscapes
Use the <3> (Landscape) mode for wide scenery, night scenes, or to
have everything in focus from near to far. The greens and blues also
become more vivid and the image sharper than with <1> (Full Auto).
Shooting Tips
With a zoom lens, use the wide-angle end.
When using the wide-angle end of a zoom lens, objects near and far
will be in focus better than at the telephoto end. It also adds breadth
to landscapes.
Shooting night scenes.
Since the built-in flash will be disabled, this
mode <3> is also good for night scenes.
Use a tripod to prevent camera shake.
If you want to photograph a person against
a night scene, set the Mode Dial to <6>
Download from Www.Somanuals.com. All Manuals Search And Download.
59
4 Shooting Close-ups
When you want to photograph flowers or small things up close, use the
<4> (Close-up) mode. To make small things appear much larger, use a
macro lens (sold separately).
Shooting Tips
Use a simple background.
A simple background makes the flower, etc., stand out better.
Move to the subject as close as possible.
Check the lens for its minimum focusing distance. Some lenses
have indications such as <40.25m/0.8ft>. The lens minimum
focusing distance is measured from the <V> (focal plane) mark on
the top left of the camera to the subject. If you are too close to the
subject, the focus confirmation light <o> will blink.
Under low light, the built-in flash will fire. If you are too close to the
subject and the bottom of the picture looks dark, move away from
the subject.
With a zoom lens, use the telephoto end.
If you have a zoom lens, using the telephoto end will make the
subject look larger.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
5 Shooting Moving Subjects
To photograph a moving subject, whether it is a child running or a
moving vehicle, use the <5> (Sports) mode.
Shooting Tips
Use a telephoto les.
Using a telephoto lens is ecommended so you can shoot from afar.
Use the center AF point to focus.
Aim the center AF point over the subject, then press the shutter
button halfway to autofocus. During autofocusing, the beeper will
continue beeping softly. If focus cannot be achieved, the focus
confirmation light <o> will blink.
When you want to take the picture, press the shutter button
completely. If you hold down the shutter button, continuous shooting
(max. approx. 3 shots per sec. in JPEG quality) and autofocusing
will take effect.
Under low light when camera shake is prone to occur, the viewfinder’s
shutter speed display on the bottom left will blink. Hold the camera steady
and shoot.
Download from Www.Somanuals.com. All Manuals Search And Download.
61
6 Shooting Portraits at Night
To shoot someone at night and obtain a natural-looking exposure in the
background, use the <6> (Night Portrait) mode.
Shooting Tips
Use a wide-angle lens and a tripod.
When using a zoom lens, use the wide-angle end to obtain a wide
night view. Also, use a tripod to prevent camera shake.
Keep the person within 5 meters/16.4 feet from the camera.
Under low light, the built-in flash will fire automatically to obtain a
good exposure of the person. The maximum effective distance of the
built-in flash is 5 meters/16.4 feet from the camera.
Shoot also with <1> (Full Auto).
Since camera shake is prone to occur with night shots, shooting also
with <1> (Full Auto) is recommended.
Tell the subject to keep still even after the flash fires.
If you use the self-timer together with flash, the self-timer lamp will light
briefly after the picture is taken.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Q Quick Control
In Basic Zone modes when the shooting
settings screen is displayed, you can
press the <Q> button to display the
Quick Control screen. The table below
indicates the functions that can be set
with the Quick Control screen in each
Basic Zone mode.
Example: Portrait mode
1
Set the Mode Dial to a Basic Zone mode.
Press the <Q> button. (7)
2
3X The Quick Control screen will appear.
Set the function.
Press the <V> key to selecfuncon. (Step not necessary in
the 1/7 mode.)
Press the <Ukey othe <6> dial to change the setting.
Settable Functions in Bsic Zone Modes
o: Set automatically k: User selectable
: Not selectable
1
7
C
2
3
4
5
6
Function
u: Single shooting
k
k
k
k
k
k
k
k
k
k
k
k
k
i: Continuous shooting
k
k
k
o
k
k
k
Drive
mode
j: 10 sec.
k
k
o
k
k
k
k
k
k
o
k
k
o
Self-
timer
q: Continuous*
Automatic firing
Flash firing
Flash on (Fires at all times)
Flash off
o
o
k
k
o
k
k
Blurring/sharpening the background (p.56)
k
k
k
k
k
k
* Use the <V> key to set the number of continuous shots.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Shoot by Ambience Selection
Except in the <1> (Full Auto) and <7> (Flash Off) Basic Zone
modes, you can select the ambience for shooting.
1
7
C
k
k
k
k
k
k
k
k
k
2
k
k
k
k
k
k
k
k
k
3
k
k
k
k
k
k
k
k
k
4
k
k
k
k
k
k
k
k
k
5
k
k
k
k
k
k
k
k
k
6
k
k
k
k
k
k
k
k
k
Ambience
(1) Standard setting
(2) Vivid
Ambience Effect
No setting
Low / Standard / Strong
Low / Standard / Strong
Low / Standard / Strong
Low / Standard / Strong
Low / Standard / Strong
Low / Medium / High
Low / Medium / High
Blue / B/W / Sepia
(3) Soft
(4) Warm
(5) Intense
(6) Cool
(7) Brighter
(8) Darker
(9) Monochrome
Set the ModDial to any of the
followimodes: <C>, <2>,
<3>, 4>, <5> or <6>.
1
Dy the Live View image.
2
With the Live View image displayed,
you can see the ambience effect.
Press the <A> button to switch to
Live View shooting.
On the Quick Control screen,
3 select the desired ambience.
Press the <Q> button (7).
Press the <V> key to select
[Standard setting]. [Shoot by
ambience selection] will appear on
the screen’s bottom.
Press the <
U> key or turn the <6>
dial to select the desired ambience.
X
The LCD monitor will show how the image
will look with the selected ambience.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
Shoot by Ambience Selection
Set the ambience effect.
4
5
Press the <V> key to select the
effect bar so that [Effect] appears at
the bottom.
Press the <U> key or turn the
<6> dial to select the desired
effect.
Take the picture.
To shoot while the Live View image is
displayed, press the shutter button.
To return to viewfinder shooting,
press the <A> button to exit Live
View shooting. Then press the shutter
button cmpletely to take the picture.
If you chnge the shooting mode or
se power switch to <2>, the
seng will revert back to [Standard
etting].
The Live View image shown with the ambience setting applied will not
look exactly the same as the actual photo.
Using flash may minimize the ambience effect.
In bright outdoors, the Live View image you see on the screen might not
have exactly the same brightness or ambience as the actual photo. Set
[6 LCD brightness] to 4 and look at the Live View image while the
screen is unaffected by stray light.
If you don’t want the Live View image to be displayed when setting
functions, press the <Q> button after step 1. When you press the <Q>
button, the Quick Control screen is displayed and you can set [Shoot by
ambience selection] and [Shoot by lighting or scene], then shoot with
the viewfinder.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
Shoot by Ambience Selection
Ambience Settings
(1) Standard setting
Standard image characteristics for the respective shooting mode.
Note that <2> has image characteristics geared for portraits and
<3> is geared for landscapes. Each ambience is a modification of
the respective shooting mode’s image characteristics.
(2) Vivid
The subject will look sharp and vivid. It makes the photo look more
impressive than with [Standard setting].
(3) Soft
The subject will look softer and more dainty. Good for portraits, pets,
flowers, etc.
(4) Warm
The subject will look softer with warmer coors. Good for portraits,
pets, and other subjects to which you wano give a warm look.
(5) Intense
While the overall brightness htly lowered, the subject is
emphasized for a more intensing. Makes the human or living
subject stand out more.
(6) Cool
The overall brightness is slightly lowered with a cooler color cast. A
subject in the shade will look more calm and impressive.
(7) Brighter
The picture will look brighter.
(8) Darker
The picture will look darker.
(9) Monochrome
The picture will be monochrome. You can select the monochrome
color to be black and white, sepia, or blue. When [Monochrome] is
selected, <0> will appear in the viewfinder.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Shoot by Lighting or Scene Type
In the <2> (Portrait), <3> (Landscape), <4> (Close-up), and <5>
(Sports) Basic Zone modes, you can shoot while the settings match the
lighting or scene type. Normally, [Default setting] is adequate, but if the
settings match the lighting condition or scene, the picture will look more
accurate to your eye.
For Live View shooting, if you set both [Shoot by lighting or scene
[Shoot by lighting or scene type]. This will make it easier to see the
resulting effect on the LCD monitor.
1
7
C
2
k
k
k
k
k
k
3
k
k
k
k
4
k
k
k
k
k
k
k
5
k
k
k
k
k
k
k
6
Lighting or Scene
(1) Default setting
(2) Daylight
(3) Shade
(4) Cloudy
(5) Tungsten light
(6) Fluorescent light
(7) Sunset
k
Set the Mode Dial to any of the
following modes: <2> <3>
<4> <5>
1
Display the Live View image.
2
With the Live View image displayed,
you can see the resulting effect.
Press the <A> button to switch to
Live View shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Shoot by Lighting or Scene Type
On the Quick Control screen,
3 select the lighting or scene type.
Press the <Q> button (7).
Press the <V> key to select
[Default setting]. [Shoot by lighting
or scene type] will appear on the
screen’s bottom.
Press the <U> key or turn the
<6> dial to select the desired
lighting or scene type.
X The LCD monitor will show how the
image will look with the selected
lighting or scene type.
Take the picure.
To shoot whe the Live View image is
4
displd, press the shutter button.
etun to the viewfinder image,
s the <A> button to exit Live
View shooting. Then press the shutter
button completely to take the picture.
If you change the shooting mode or
set the power switch to <2>, the
setting will revert back to [Default
setting].
If you use flash, the setting will switch to [Default setting]. (However, the
shooting information will display the lighting or scene type that was set.)
If you want to set this together with [Shoot by ambience selection], set
the [Shoot by lighting or scene type] which best matches the ambience
you have set. In the case of [Sunset] for example, warm colors will
become prominent so the ambience you set might not work well.
If you don’t want the Live View image to be displayed when setting
functions, press the <Q> button after step 1. Pressing the <Q> button will
display the Quick Control screen. You can then set [Shoot by lighting or
scene type] and shoot through the viewfinder.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
Shoot by Lighting or Scene Type
Lighting or Scene Type Settings
(1) Default setting
The default setting.
(2) Daylight
For subjects under sunlight. Gives more natural-looking blue skies
and greenery and reproduces light-colored flowers better.
(3) Shade
For subjects in the shade. Suitable for skin tones, which may look
too bluish, and for light-colored flowers.
(4) Cloudy
For subjects under overcast skies. Makes skin tones and
landscapes, which may otherwise look dull on a cloudy day, look
warmer. Also effective for light-colored flowers.
(5) Tungsten light
For subjects lit under tungsten liing. educes the reddish-orange
color cast caused by tungsten ligng.
(6) Fluorescent light
For subjects under uorescighting. Suited for all types of
fluorescent lighting.
(7) Sunset
Suitable when you want to capture the sunset’s impressive colors.
Download from Www.Somanuals.com. All Manuals Search And Download.
69
x Image Playback
The easiest way to playback images is explained below. For more
details on the playback procedure, see page 175.
Playback the image.
When you press the <x> button, the
1
last image captured will be displayed.
Select an image.
To view images starting with the last
2
image, press the <Y> key. To view
images starting with the first (oldest)
image, press the <Z> key.
Each time you press the <B>
button, the splay format will change.
With basic information
Basic information +
Image quality/Playback number
Shooting information display
Histogram
Exit the image playback.
3
Press the <x> button to exit the
image playback and return to the
shooting settings display.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
Creative Shooting
In the Basic Zone modes, to preent soiled shots,
most functions are set automatiy and cannot be
changed. In the <d> (ProAE) mode, you can set
various functions anbe mcreative.
In the <d> mode, the camera sets the shutter speed and
aperture automatically to obtain a standard exposure.
The difference between the Basic Zone modes and <d> is
explained on page 232.
The functions explained in this chapter can also be used in
the <s>, <f>, and <a> modes explained in Chapter
4.
The M mark shown on the right of the page title indicates
that the function is available only in Creative Zone modes
* <d> stands for Program.
* AE stands for Auto Exposure.
Download from Www.Somanuals.com. All Manuals Search And Download.
71
d: Program AE
The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.
Set the Mode Dial to <d>.
1
Focus the subject.
Look through the viewfinder and aim
2
the selected AF point over the
subject. Then press the shutter button
halfway.
X The dot inside the AF point achieving
focus lights briefly in red, and the
focus confirmation light <o> in the
viewfinder’s bottom right lights (with
One t AF.
X e sutter speed and aperture will
et automatically and displayed in
tviewfinder.
Check the display.
A standard exposure will be obtained
3
as long as the shutter speed and
aperture display do not blink.
Take the picture.
4
Compose the shot and press the
shutter button completely.
If you use a TS-E lens to shift the lens vertically or use an Extension Tube,
the standard exposure might not be obtained or an irregular exposure may
result.
Download from Www.Somanuals.com. All Manuals Search And Download.
72
d: Program AE
Shooting Tips
Change the ISO speed or use the built-in flash.
To match the subject and ambient lighting level, you can change the
the built-in flash will not fire automatically. So under low light, press
the <I> (Flash) button to pop up the built-in flash. (You can also pop
up the built-in flash by selecting the <s> icon on the Quick Control
screen.)
The program can be shifted. (Program shift)
After pressing the shutter button halfway, turn the <6> dial to
change the shutter speed and aperture setting combination
(program). Program shift is canceled automatically after the picture
is taken. Program shift is not possible with flash.
If the “30"” shutter speed and the maximum aperture
blink, it indicates underexposure. Increase the ISO
speed or use flash.
If the “4000” shutter speed and the minimum aperture
blink, it indicates overexposure. Decrease the ISO
speed.
Differences Between <d> and <1> (Full Auto)
With <1>, many functions such the AF mode, drive mode, and built-in
flash are set automatically to prevent spoiled shots. The functions you can
set are limited. With <d>, only the shutter speed and aperture are set
automatically. You can freely set the AF mode, drive mode, built-in flash,
Download from Www.Somanuals.com. All Manuals Search And Download.
73
3 Setting the Image-recording Quality
You can select the pixel count and the image quality. Ten image-
recording quality settings are provided: 73, 83, 74, 84, 7a,
8a, b, c, 1, 1+73.
Select [Quality].
Under the [1] tab, select [Quality],
1
then press <0>.
X [Quality] will appear.
Select the image-recording
Pixel count
Possible shots
2 quality.
The respective quality’s pixel count
and number of possible shots will be
displayed to help you select the
desired quaty. Then press <0>.
Guide to Image-recording QuaSengs (Approx.)
Pixels Rd File Size Possible Maximum
Quality
megapixels)
(MB)
4.4
2.2
2.6
1.4
1.7
0.9
Shots
Burst
73
83
74
84
7a
8a
830
830
High
quality
Approx. 12.2
(12.2M)
1600
1400
2630
2130
4060
1600
1400
2630
2130
4060
Medium
quality
Approx. 6.3
(6.3M)
Approx. 3.4
(3.4M)
JPEG
Low
quality
Approx. 2.5
(2.5M)
b
1.2
0.3
2880
2880
Approx. 0.35
(0.35M)
c
11280
11280
1
16.7
210
170
5
1
High
quality
Approx. 12.2
(12.2M)
1+73
16.7+4.4
* Figures for the file size, number of possible shots, and maximum burst are based on
Canon’s 4GB test card and testing standards (ISO 100 and Standard Picture Style).
These figures will vary depending on the subject, card brand, ISO speed, Picture
Style, Custom Functions, and other settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
3 Setting the Image-recording Quality
FAQ
I want to select the image-recording quality matching the paper
size for printing.
Refer to the diagram on the left when
choosing the image-recording quality. If
you want to crop the image, selecting a
Paper size
A3 (42x29.7cm/16.5x11.7in.)
73
higher quality (more pixels) such as 73,
83
1
1+73
A4 (29.7x21cm/
11.7x8.3in.)
83, 1, or 1+73 is recommended.
b is suitable for playing the images on a
digital photo frame. c is suitable for
emailing the image or using it on a Web
site.
74
84
7a
8a
b
17.8x12.7cm/7.0x5.0in.
14.8x10cm/5.8x3.9in.
12.7x8.9cm/5.0x3.5in.
What’s the difference betweeand 8?
It indicates a different imagquadue to a different compression
rate. Even with the same er of pixels, the 7 image has higher
image quality. If 8 is selectehe image quality will be slightly lower,
but more images can be aved to the card. Both b and c have 7
(Fine) quality.
I could take more shots than the number of possible shots
indicated.
Depending on the shooting conditions, you may be able to take
more shots than was indicated. It might also be fewer than indicated.
The number of possible shots displayed is only approximate.
Does the camera display the maximum burst?
The maximum burst is displayed in the viewfinder’s right side. Since
it is only a single-digit indicator 0 - 9, any number higher than 9 will
be displayed only as “9.” Note that this number will also be displayed
even when no card is installed in the camera. Be careful not to shoot
without a card in the camera.
When should I use 1?
1 images require processing with your computer. For details, see
“About 1” and “About 1+73” on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
75
3 Setting the Image-recording Quality
About 1
1 is the raw image data before it is made into 73 or other images.
Although 1 images require software like Digital Photo Professional
(provided, p.270) so they can be displayed on the computer, they also
offer flexibility for image adjustments possible only with 1. 1 is
effective when you want to precisely adjust the image yourself or shoot
an important subject.
About 1+73
1+73 records both a 1 and 73 image with a single shot. The
two images are saved to the card simultaneously. The two images will
be saved in the same folder with the same file numbers (file extension
.JPG for JPEG and .CR2 for RAW). 73 imags can be viewed or
printed even with a computer which donot ave the software
provided with the camera installed.
1 image
73image
0001 . CR2
0001 . JPG
File number
File extension
Commercially-available software might not be able to display RAW images.
Using the provided software is recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
76
Z: Changing the ISO SpeedN
Set the ISO speed (image sensor’s sensitivity to light) to suit the
ambient light level. In Basic Zone modes, the ISO speed is set
Press the <WZ> button.
1
X [ISO speed] will appear.
Set the ISO speed.
2
Press the <U> key or turn the
<6> dial to select the desired ISO
speed, then press <0>.
With [AUTO] selected, the ISO speed
ISO Speed Guide
ISO Speed
100 - 400
Shooting Situation (No flash)
Flash Range
Suny outdoors
The higher the ISO speed,
400 - 1600
1600 - 6400
Overcast skies or evening time the farther the flash range will
Dark indoors or night
* High ISO speeds will result in grainier images.
Under [7 Custom Functions (C.Fn)], if [5: Highlight tone priority] is
Shooting in high temperatures may result in images that look grainier.
Long exposures can also cause irregular colors in the image.
When you shoot at high ISO speeds, noise (banding, dots of light, etc.)
may become noticeable.
Under [7 Custom Functions (C.Fn)], if [9: Flash button function] is set
to [1: ISO speed], you can set the ISO speed with the <D> button.
Download from Www.Somanuals.com. All Manuals Search And Download.
77
Z: Changing the ISO SpeedN
ISO [AUTO]
If the ISO speed is set to [AUTO], the
actual ISO speed to be set will be
displayed when you press the shutter
button halfway. As indicated below, the
ISO speed will be set automatically to
suit the shooting mode.
Shooting Mode
1/7/C/3/4/5/6
d/s/f/a*1/8
2
ISO Speed Setting
Automatically set within ISO 100 - 3200
Automatically set within ISO 100 - 6400*2
Fixed at ISO 100
With flash
Fixed at ISO 800*3*4*5
*1: Fixed at ISO 800 for bulb exposures.
*2: Depends on the maximum ISO speed limit set.
*3: If fill flash results in overexposure, ISO r a hiher ISO speed will be set.
*4: If bounce flash is used with an extal Sedlite in a Basic Zone (except
<6>) mode, <d> or <8> SO 800 - 1600 (or up to the maximum
limit) will be set automatically.
*5: Fixed at ISO 400 if the mamum limit is ISO 400.
When [AUTO] is set, the ISO speed is indicated in whole-stop
increments. However, the ISO speed is actually set in finer increments.
Therefore, in the image’s shooting information (p.198), you may find an
ISO speed like 125 or 640 displayed as the ISO speed.
In the <2> mode, the ISO speed shown in the table is actually used
even if ISO 100 is not displayed.
3 Setting the Maximum ISO Speed for ISO AutoN
For ISO Auto, you can set the maximum ISO speed limit within ISO 400 - 6400.
Under the [y] tab, select [ISO Auto],
then press <0>. Select the ISO speed,
then press <0>.
Download from Www.Somanuals.com. All Manuals Search And Download.
78
A
Selecting the Subject’s Optimal Image CharacteristicsN
By selecting a Picture Style, you can obtain image characteristics
matching your photographic expression or the subject.
In Basic Zone modes, you cannot select the Picture Style.
Select [Picture Style].
1
Under the [2] tab, select [Picture
Style], then press <0>.
X The Picture Style selection screen will
appear.
Select a Picture Style.
2
Select a Picture Style, then press
<0>.
X The Pictre Style will be set and the
mu reappears.
Picture Style Charactestics
P Standard
The image looks vivid, sharp, and crisp. This is a general-purpose
Picture Style suitable for most scenes.
Q Portrait
For nice skin tones. The image looks softer. Good for close-up
portraits. This Picture Style is also selected automatically when the
Mode Dial is set to <2>.
R Landscape
For vivid blues and greens, and very sharp and crisp images.
Effective for impressive landscapes. This Picture Style is also
selected automatically when the Mode Dial is set to <3>.
Download from Www.Somanuals.com. All Manuals Search And Download.
79
A Selecting the Subject’s Optimal Image CharacteristicsN
S Neutral
This Picture Style is for users who prefer to process images with
their computer. For natural colors and subdued images.
U Faithful
This Picture Style is for users who prefer to process images with
their computer. When the subject is captured under a color
temperature of 5200K, the color is adjusted colorimetrically to match
the subject’s color. The image looks dull and subdued.
V Monochrome
Creates black-and-white images.
Monochrome images shot in an image-recording quality other than
1 cannot be reverted to color. If you want to later shoot pictures in
color, make sure the [Monochrome] setting has been canceled.
When [Monochrome] is set, <0> will ppear in the viewfinder.
W User Def. 1-3
You can register a basic style h a[Portrait], [Landscape], a
Defined Picture Style which has not been set will have the same
default settings as the [Standard] Picture Style.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
E: Changing the Autofocus ModeN
You can select the AF (autofocus) mode to suit the shooting conditions
or subject. In Basic Zone modes, the most suitable AF mode is set
automatically.
On the lens, set the focus mode
switch to <AF>.
1
Press the <ZE> button.
2
X [AF mode] will appear.
Selthe AF mode.
3
Prss the <U> key or turn the
6> dial to select the desired AF
mode, then press <0>.
Focus the subject.
Aim the AF point over the subject and
4
press the shutter button halfway. The
camera will then autofocus in the
selected AF mode.
One-Shot AF for Still Subjects
Suited for still subjects. When you press the shutter button
halfway, the camera will focus only once.
When focus is achieved, the dot inside the AF point achieving focus
lights briefly in red, and the focus confirmation light <o> in the
viewfinder will also light.
the same time focus is achieved.
While you hold down the shutter button halfway, the focus will be
locked. You can then recompose the shot if desired.
Download from Www.Somanuals.com. All Manuals Search And Download.
81
E: Changing the Autofocus ModeN
If focus cannot be achieved, the focus confirmation light <o> in the
viewfinder will blink. If this occurs, a picture cannot be taken even if the
shutter button is pressed completely. Recompose the picture and try to
focus again. Or see “Subjects Difficult to Focus” (p.85).
If [1 Beep] is set to [Disable], the beeper will not sound when focus is
achieved.
AI Servo AF for Moving Subjects
This AF mode is for moving subjects when the focusing distance
keeps changing. While you hold down the shutter button halfway,
the subject will be focused continuously.
The exposure is set at the moment the picture is taken.
uses the center AF point to focus. During atofocusing, if the subject
moves away from the center AF pocutracking continues as
long as the subject is covereanher AF point.
With AI Servo AF, the beeer will und even when focus is achieved.
Also, the focus confirmatioligh<o> in the viewfinder will not light.
AI Focus AF for Automatic Switching of AF Mode
AI Focus AF switches the AF mode from One-Shot AF to AI Servo
AF automatically if the still subject starts moving.
After the subject is focused in One-Shot AF mode, if the subject
starts moving, the camera will detect the movement and change the
AF mode automatically to AI Servo AF.
When focus is achieved in the AI Focus AF mode with the Servo mode
active, the beeper will sound continuously sofltly. However, the focus
confirmation light <o> in the viewfinder will not light.
Download from Www.Somanuals.com. All Manuals Search And Download.
82
S Selecting the AF Point N
In Basic Zone modes, the camera will normally focus the closest subject
automatically. Therefore, it might not always focus your target subject.
In the <d>, <s>, <f>, and <a> modes, you can select the AF
point and use it to focus the target subject.
Press the <S> button. (9)
1
X The currently-selected AF point will
be displayed on the LCD monitor and
in the viewfinder.
Select the desired AF point.
2
Press the <S> key to select the AF
point.
While loking at the viewfinder, you
can selethe AF point by turning the
<> dial until the desired AF point
ighs in red.
hen all the AF points light up,
automatic AF point selection will be
set. The AF point will be selected
automatically to focus the subject.
Pressing <0> toggles the AF point
selection between the center AF point
and automatic AF point selection.
Focus the subject.
Aim the selected AF point over the
3
subject and press the shutter button
halfway to focus.
Download from Www.Somanuals.com. All Manuals Search And Download.
83
S Selecting the AF Point N
Shooting Tips
When shooting a portrait up close, use One-Shot AF and focus
the eyes.
If you focus the eyes first, you can then recompose and the face will
remain sharp.
If it is difficult to focus, select and use the center AF point.
The center AF point is the most sensitive among the nine AF points.
To make it easier to focus a moving subject, set the camera to
The center AF point will first be used to focus the subject. During
autofocusing, if the subject moves away from the center AF point,
focus tracking continues as long as the subject is covered by
another AF point.
AF-Assist Beam with the Built-ilash
Under low-light conditions, when ress the shutter button halfway,
the built-in flash fires a brieburst of flashes. It illuminates the subject to
enable easier autofocusing.
The AF-assist beam will not be fired in the following shooting modes:
<7>, <3> and <5>.
The AF-assist beam cannot be emitted in the AI Servo AF mode.
The effective range of the AF-assist beam emitted by the built-in flash is
about 4 meters/13.1 feet.
In Creative Zone modes when you raise the built-in flash with the <I>
button (p.88), the AF-assist beam will be fired when necessary.
If you use an Extender (sold separately) and the maximum aperture
becomes smaller than f/5.6, AF shooting will not be possible (except in [Live
mode] and [u Live mode] during Live View shooting). For details, see the
Extender’s instruction manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
84
Subjects Difficult to Focus
Autofocus can fail to achieve focus (viewfinder’s focus confirmation light
<o> blinks) with certain subjects such as the following:
Very low-contrast subjects.
(Example: Blue sky, solid-color walls, etc.)
Subjects in very low light
Extremely backlit or reflective subjects
(Example: Car with a highly reflective body, etc.)
Near and far subjects covered by an AF point
(Example: Animal in a cage, etc.)
Repetitive patterns
(Example: Skyscraper windows, computer keyboards, etc.)
In such cases, do one of the following:
(1) With One-Shot AF, focus an object at the same distance as the
(2) Set the lens focus mode switch to <MFand focus manually.
Conditions in which focus is diult tchieve in the [Live mode] and [u
MF: Manual Focusing
Set the lens focus mode switch to
<MF>.
1
2
Focus the subject.
Focus by turning the lens focusing
ring until the subject looks sharp in
the viewfinder.
Focusing ring
If you hold down the shutter button halfway during manual focusing, the AF
point achieving focus will light in red briefly, the beeper will sound, and the
focus confirmation light <o> in the viewfinder will light.
Download from Www.Somanuals.com. All Manuals Search And Download.
85
i Continuous ShootingN
You can shoot up to about 3 shots per sec. This is effective for shooting
a child running toward you or capturing different facial expressions.
Press the <Yij> button.
1
2
Select <i>.
Press the <U> key or turn the
<6> dial to select continuous
shooting <i>, then press <0>.
The continuous shooting speed will
vary depending on the image-
JPEG
1
: Max. approx. 3 fps
: Max. approx. 2 fps
1+73 : pprox. 0.8 fps
(veraged value)
Take thpicture.
3
amera shoots continuously while you
hdown the shutter button completely.
Shooting Tips
• For a moving subject
When AI Servo AF is set, focusing will be continuous during continuous shooting.
• For still subjects
When One-Shot AF is set, the camera will focus only once during
continuous shooting.
Depending on the image-recording quality setting, if [3: Long exposure
speed noise reduction] is set to [2: Strong] under [7 Custom
Functions (C.Fn)], the continuous shooting speed may be slower and
the maximum burst during continuous shooting may decrease.
In AI Servo AF mode, the continuous shooting speed may become
slightly slower depending on the subject and the lens used.
The continuous shooting speed might also decrease indoors and under low light.
Download from Www.Somanuals.com. All Manuals Search And Download.
86
j Using the Self-timer
Press the <Yij> button.
1
2
Select the self-timer.
Press the <U> key or turn the
<6> dial to select the desired self-
timer, then press <0>.
j
: 10-sec. self-timer
l : 2-sec. self-timerN
q : 10-sec. self-timer plus
continuous shots
Press the <V> key to set
the number of continuous
shots (2 to 10) to be taken
with the self-timer.
Take the cture.
3
Lthrough the viewfinder, focus
the subject, then press the shutter
utton completely.
X
You can check the self-timer operation with
the self-timer lamp, beeper, and countdown
display (in seconds) on the LCD monitor.
X Two seconds before the picture is
taken, the self-timer lamp will stay on
and the beeper will sound faster.
With <
q>, the interval between the multiple shots may be prolonged depending on
the shooting functions settings such as the image-recording quality or flash.
If you will not look through the viewfinder when you press the shutter
viewfinder when the picture is taken, it may throw off the exposure.
an object at about the same distance as where you will stand.
To cancel the self-timer after it starts, press the <Yij> button. To cancel the
self-timer during Live View shooting, set the power switch to < >.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
87
D Using the Built-in Flash
In indoors, low light, or backlit conditions in daylight, just raise the built-
in flash and press the shutter button to take flash pictures. In the <d>
mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set
automatically to prevent camera shake.
Press the <D> button.
1
In Creative Zone modes, you can
press the <D> button anytime to take
flash pictures.
While the flash is recycling, “DbuSY”
is displayed in the viewfinder, and
[BUSYD] is displayed on the LCD
monitor.
Press the shutter button halfway.
2
In the bottoleft of the viewfinder,
cheat the <D> icon is lit.
Tthpicture.
n focus is achieved and you
3
press the shutter button completely,
the flash will fire for the picture.
Effective Flash Range
[Approx. in meters/feet]
EF-S18-55mm f/3.5-5.6 IS II
EF-S18-55mm f/3.5-5.6 III
ISO Speed
Wide Angle
Telephoto
100
200
1 - 2.6 / 3.3 - 8.5
1 - 3.7 / 3.3 - 12.1
1 - 5.3 / 3.3 - 17.4
1 - 7.4 / 3.3 - 24.3
1 - 10.5 / 3.3 - 34.4
1 - 14.9 / 3.3 - 48.9
1 - 21.0 / 3.3 - 68.9
1 - 1.6 / 3.3 - 5.2
1 - 2.3 / 3.3 - 7.5
1 - 3.3 / 3.3 - 10.8
1 - 4.6 / 3.3 - 15.1
1 - 6.6 / 3.3 - 21.7
1 - 9.3 / 3.3 - 30.5
1 - 13.1 / 3.3 - 43.0
400
800/AUTO*
1600
3200
6400
* For fill flash, the ISO speed might be set lower than ISO 800.
Download from Www.Somanuals.com. All Manuals Search And Download.
88
D Using the Built-in Flash
Shooting Tips
By increasing the ISO speed, you can extend the flash range.
In bright light, decrease the ISO speed.
If the exposure setting in the viewfinder blinks, decrease the ISO
speed.
Detach the lens hood and keep at least 1 meter/3.3 feet away
from the subject.
If the lens has a hood attached or you are too close to the subject,
the bottom of the picture might look dark due to the obstructed flash.
For important shots, check the image on the LCD monitor to make
sure the flash exposure looks natural (not dark at the bottom).
3 Red-eye Reduction
Using the red-eye reduction lamp be taking a flash picture can
reduce red eye. Red-eye redwl work in any shooting mode
except <7> <3> <5> <k
Under the [1] tab, select [Red-eye
reduc.], then press <0>. Select
[Enable], then press <0>.
For flash photography, when you press
the shutter button halfway, the red-eye
reduction lamp will light. Then when
you press the shutter button
completely, the picture will be taken.
The red-eye reduction feature is most effective when the subject looks at
the red-eye reduction lamp, when the room is well lit, or when you are
close to the subject.
When you press the shutter button halfway, the
scale display on the bottom of the viewfinder will
shrink and turn off. For best results, take the picture
after this scale display turns off.
The effectiveness of red-eye reduction varies depending on the subject.
Download from Www.Somanuals.com. All Manuals Search And Download.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Shooting
This chapter builds on Chapter and ntroduces more
ways to shoot creatively.
The first half of this chaptains how to use the <s>
<f> <a> <8> modes on the Mode Dial.
All the functions explainein Chapter 3 can also be used in
the <s>, <f>, and <a> modes.
To see which functions can be used in each shooting mode,
see page 232.
The M mark shown on the right of the page title indicates
that the function is available only in Creative Zone modes
c About the Main Dial Pointer
The pointer icon <c> displayed
together with the shutter speed, aperture
setting, or exposure compensation
amount indicates that you can turn the
<6> dial to adjust the respective
setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
91
s: Action Shots
You can either freeze the action or create motion blur with the <s>
(Shutter-priority AE) mode on the Mode Dial.
* <s> stands for Time value.
Blurred motion
Frozen action
(Slow shutter speed: 1/30 sec.)
(Fast shutter speed: 1/2000 sec.)
Set the Mode Dial to <s>.
1
She esired shutter speed.
“Shooting Tips” for advice on
setting the shutter speed.
2
Turning the <6> dial to the right
sets a faster shutter speed, and
turning it to the left sets a slower one.
Take the picture.
3
When you focus and press the
shutter button completely, the picture
will be taken at the selected shutter
speed.
Shutter Speed Display
The LCD monitor displays the shutter speed as a fraction. However, the
viewfinder displays only the denominator. Also, “0"5” indicates 0.5 sec. and
“15"” is 15 sec.
Download from Www.Somanuals.com. All Manuals Search And Download.
92
s: Action Shots
Shooting Tips
To freeze the action or moving subject.
Use a fast shutter speed such as 1/4000 sec. to 1/500 sec.
To blur a running child or animal giving the impression of fast
movement.
Use a medium shutter speed such as 1/250 sec. to 1/30 sec. Follow
the moving subject through the viewfinder and press the shutter
button to take the picture. If you use a telephoto lens, hold it steady
to prevent camera shake.
How to blur a flowing river or water fountain.
Use a slow shutter speed of 1/30 sec. or slower. Use a tripod to
prevent hand-held camera shake.
Set the shutter speed so that the apture display does not
blink in the viewfinder.
If you press the shutter buhaway and change
the shutter speed while thture is displayed,
the aperture display will also change to maintain the
same exposure (amount of light reaching the image
sensor). If you exceed the adjustable aperture
range, the aperture display will blink to indicate that
the standard exposure cannot be obtained.
If the exposure will be too dark, the maximum aperture (smallest
number) will blink. If this happens, turn the <6> dial to the left to
set a slower shutter speed or increase the ISO speed.
If the exposure will be too bright, the minimum aperture (highest
number) will blink. If this happens, turn the <6> dial to the right to
set a faster shutter speed or decrease the ISO speed.
I Using the Built-in Flash
To obtain a correct flash exposure, the flash output will be set
automatically (autoflash exposure) to match the automatically-set
aperture. The flash sync speed can be set from 1/200 sec. to 30 sec.
Download from Www.Somanuals.com. All Manuals Search And Download.
93
f: Changing the Depth of Field
To blur the background or to make everything near and far look sharp,
set the Mode Dial to <f> (Aperture-priority AE) to adjust the depth of
field (range of acceptable focus).
* <f> stands for Aperture value which is the size of the diaphragm hole inside the lens
.
Blurred background
(With a low aperture f/number: f/5.6)
Sharp foreground and background
(With a high aperture f/number: f/32)
Set the ModDial to <f>.
1
Se desired aperture.
higher the f/number, the wider
2
the depth of field where sharper focus
is obtained in both the foreground
and background.
Turning the <6> dial to the right will
set a higher f/number (smaller
aperture opening), and turning it to
the left will set a lower f/number
(larger aperture opening).
Take the picture.
3
Focus and press the shutter button
completely. The picture will be taken
with the selected aperture.
Aperture Display
The higher the f/number, the smaller the aperture opening will be. The
apertures displayed will differ depending on the lens. If no lens is attached to
the camera, “00” will be displayed for the aperture.
Download from Www.Somanuals.com. All Manuals Search And Download.
94
f: Changing the Depth of Field
Shooting Tips
When using an aperture with a high f/number, note that camera
shake can occur in low light scenes.
A higher aperture f/number will make the shutter speed slower.
Under low light, the shutter speed can be as long as 30 sec. In such
cases, increase the ISO speed and hold the camera steady or use a
tripod.
The depth of field depends not only on the aperture, but also on
the lens and on the subject distance.
Since wide-angle lenses have a wide depth of field (range of
acceptable focus in front of and behind the point of focus), you need
not set a high aperture f/number to obtain a sharp picture from the
foreground to the background. On the other hand, a telephoto lens
has a narrow depth of field.
And the closer the subject, the wer he depth of field. A farther
subject will have a wider dof ield.
Set the aperture sthat thutter speed display does not
blink.
If you press the shutter button halfway and change
the aperture while the shutter speed is displayed,
the shutter speed display will also change to
maintain the same exposure (amount of light
reaching the image sensor). If you exceed the
adjustable shutter speed range, the shutter speed
display will blink to indicate that the standard
exposure cannot be obtained.
If the picture will be too dark, the “30"” (30 sec.) shutter speed
display will blink. If this happens, turn the <6> dial to the left to set
a lower aperture f/number or increase the ISO speed.
If the picture will be too bright, the “4000” (1/4000 sec.) shutter
speed display will blink. If this happens, turn the <6> dial to the
right to set a higher aperture f/number or decrease the ISO speed.
Download from Www.Somanuals.com. All Manuals Search And Download.
95
f: Changing the Depth of Field
I Using the Built-in Flash
To obtain a correct flash exposure, the flash output will be set
automatically to match the set aperture (autoflash exposure). The
shutter speed will be set automatically between 1/200 sec. - 30 sec. to
suit the scene’s brightness.
In low light, the main subject is exposed with the automatic flash, and
the background is exposed with a slow shutter speed set automatically.
Both the subject and background look properly exposed (automatic
slow-speed flash sync). If you are handholding the camera, keep it
steady to prevent camera shake. Using a tripod is recommended.
If you do not want a slow shutter speed to be used, set [2: Flash sync.
speed in Av mode] to [1: 1/200-1/60 sec. auto] or [2: 1/200 sec.
3 Depth of Field PreviewN
The aperture opening (diaphragmchaes only at the moment when
the picture is taken. Otherwise, erture remains fully open.
Therefore, when you look t the se through the viewfinder or LCD
monitor, the depth of field wll lok narrow. With the procedure below,
you can check the depth of field before taking the picture.
1
Enable depth-of-field preview to be used.
Under [7 Custom Functions (C.Fn)], set [8: Assign SET
2
3
Exit the menu.
Press the <M> button two times to exit the menu.
Press <0>.
X
The aperture will be stopped down so you can see the depth of field.
button, you can change the aperture and see how the depth of field
changes.
Download from Www.Somanuals.com. All Manuals Search And Download.
96
a: Manual Exposure
You can set both the shutter speed and aperture manually as desired.
While referring to the exposure level indicator in the viewfinder, you can
set the exposure as desired. This method is called manual exposure.
* <a> stands for Manual.
Set the Mode Dial to <a>.
1
Set the shutter speed and
2 aperture.
To set the shutter speed, turn the
<6>
<6> dial.
<O> + <6>
To set the aperture, hold down the
> button and turn the < > dial.
<O
6
Standard exposure index
Exposure level mark
Focus the subject.
3
Prss thshutter button halfway.
X Txposure setting will be
islayed in the viewfinder.
he exposure level mark <h> indicates
how far the current exposure level is
from the standard exposure level.
Set the exposure and take the
4 picture.
Set the shutter speed and aperture as
desired.
If the exposure set exceeds ±2 stops from
the standard exposure, the end of the
exposure level indicator will display <
or < > in the viewfinder. (On the LCD
monitor, if the exposure level is higher
than ±3 stops, the < > icon will blink at
where <-3> or <+3> is displayed.)
I>
J
N
Disable], the image may still look bright even if a darker exposure has been set.
[
Download from Www.Somanuals.com. All Manuals Search And Download.
97
a: Manual Exposure
I Using the Built-in Flash
To obtain a correct flash exposure, the flash output will be set
automatically (autoflash exposure) to match the manually-set aperture.
The flash sync speed can be set from 1/200 sec. to 30 sec. and bulb.
BULB: Bulb Exposures
A bulb exposure keeps the shutter open
for as long as you hold down the shutter
button. It can be used to photograph
fireworks, etc.
In step 2 on the preceding page, turn the
<6> dial to the left to set <BULB>.
The elapsed exposure time will be
displayed on thLCD monitor.
Elapsed exposure time
During bulb exposures, do not point the lens toward the sun. The sun’s
heat can damage the camera’s internal components.
Since bulb exposures produce more noise than usual, the image might
look a little grainy.
You can reduce the noise due to long exposures by setting [3: Long exp.
noise reduction] to [1: Auto] or [2: On] in the [7 Custom Functions
(C.Fn)] (p.219).
For bulb exposures, using a tripod and Remote Switch (sold separately,
Download from Www.Somanuals.com. All Manuals Search And Download.
98
8
:
Automatic Depth-of-Field AE
Objects in the foreground and background will be in focus automatically.
All the AF points will function to detect the subject, and the aperture
required to attain the necessary depth of field will be set automatically.
* <8> stands for Auto-Depth of field. This mode sets the depth of field
automatically.
Set the Mode Dial to <8>.
1
Focus the subject.
2
Aim the AF points over the subjects
and press the shutter button halfway
(0).
All the subjects covered by the AF
points flashing in red will be in focus.
If us is not achieved, the picture
caot be taken.
e the picture.
3
FAQ
The aperture display in the viewfinder blinks.
The exposure is correct, but the desired depth of field cannot be
obtained. Either use a wide-angle lens or move farther away from
the subjects.
The shutter speed display in the viewfinder blinks.
If the “30"” shutter speed blinks, it means that the subject is too dark.
Increase the ISO speed. If the “4000” shutter speed blinks, it means
that the subject is too bright. Decrease the ISO speed.
A slow shutter speed has been set.
Use a tripod to steady the camera.
I want to use flash.
Flash can be used, however, the result will be the same as using the
<d> mode with flash. The desired depth of field will not be obtained.
Download from Www.Somanuals.com. All Manuals Search And Download.
99
q Changing the Metering ModeN
Three methods (metering modes) to measure the subject’s brightness
are provided. Normally, evaluative metering is recommended.
In Basic Zone modes, evaluative metering is set automatically.
Select [Metering mode].
1
Under the [2] tab, select [Metering
mode], then press <0>.
Set the metering mode.
2
Select the desired metering mode,
then press <0>.
q Evaluative metering
This is an all-around metering mode suited for
portraits and ebacit subjects. The camera
sets the exosuautomatically to suit the
scene.
w Patial metering
Effective when the background is much brighter
than the subject due to backlighting, etc. The
gray area in the left figure is where the
brightness is metered to obtain the standard
exposure.
e Center-weighted average metering
The brightness is metered at the center and
then averaged for the entire scene. This
metering mode is for advanced users.
With q, the exposure setting will be locked when you press the shutter
button halfway and focus is achieved. With w and e, the exposure setting
is set at the moment of exposure. (The exposure setting is not locked when
you press the shutter button halfway.)
Download from Www.Somanuals.com. All Manuals Search And Download.
100
Setting Exposure CompensationN
O Setting Exposure Compensation
Set exposure compensation if the exposure (without flash) does not come out
as desired. This feature can be used in Creative Zone modes (except <
a>).
You can set the exposure compensation up to ±5 stops in 1/3-stop increments.
Making it brighter:
Hold down the <O> button and
turn the <6> dial to the right.
(Increased exposure)
Making it darker:
Hold down the <O> button and
turn the <6> dial to the left.
Increased exposure for a brighter image
(Decreased exposure)
X As showin the figure, the exposure
ls displayed on the LCD monitor
anin the viewfinder.
Decreased exposure for a darker image
fter taking the picture, cancel the
exposure compensation by setting
it back to 0.
Dark exposure
Increased exposure for a brighter image
The exposure compensation amount displayed in the viewfinder goes up
to only ±2 stops. If the exposure compensation amount exceeds ±2
stops, the end of the exposure level indicator will display <I> or <J>.
The exposure compensation can also be set with [2 Expo. comp./
you should use [2 Expo. comp./AEB] to set it.
Download from Www.Somanuals.com. All Manuals Search And Download.
101
Setting Exposure CompensationN
y Flash Exposure Compensation
Set flash exposure compensation if the flash exposure of the subject
does not come out as desired. You can set the flash exposure
compensation up to ±2 stops in 1/3-stop increments.
Press the <Q> button. (7)
1
X The Quick Control screen will appear
Select [y].
Press the <S> key to select [y*].
X [Flash exposure comp.] will be
2
displayed athe bottom.
Set the sh exposure
3 censation amount.
ake the flash exposure brighter,
turn the <6> dial to the right.
(Increased exposure)
To make it darker, turn the <6> dial
to the left. (Decreased exposure)
X When you press the shutter button
halfway, the <y> icon will appear in
the viewfinder.
After taking the picture, cancel the
flash exposure compensation by
setting it back to 0.
[Disable], the image may look bright even if a decreased exposure
compensation or decreased flash exposure compensation has been set.
You can also set flash exposure compensation with [Built-in flash func.
Download from Www.Somanuals.com. All Manuals Search And Download.
102
3 Auto Exposure BracketingN
This feature takes exposure compensation a step further by varying the
exposure automatically (up to ±2 stops in 1/3-stop increments) with
three shots as shown below. You can then choose the best exposure.
This is called AEB (Auto Exposure Bracketing).
Darker exposure
Brighter exposure
Standard exposure
(Decreased exposure)
(Increased exposure)
Select [Expo. comp./AEB].
Under the [2] tab, select [Expo.
comp./AB], then press <0>.
1
et te AEB amount.
urn the <6> dial to set the AEB
amount.
2
Press the <U> key to set the
exposure compensation amount. If
AEB is combined with exposure
compensation, AEB will be applied
centering on the exposure
AEB amount
compensation amount.
Press <0> to set it.
When you press the <M> button
to exit the menu, the AEB level will be
displayed on the LCD monitor.
Take the picture.
3
Focus and press the shutter button
completely. The three bracketed
shots will be taken in this sequence:
Standard exposure, decreased
exposure, and increased exposure.
Download from Www.Somanuals.com. All Manuals Search And Download.
103
3 Auto Exposure BracketingN
Canceling AEB
Follow steps 1 and 2 to turn off the AEB amount display.
The AEB setting will also be canceled automatically if the power
switch is set to <2>, flash recycling is completed, etc.
Shooting Tips
Using AEB with continuous shooting:
shutter button completely, the three bracketed shots will be taken
continuously in this sequence: Standard exposure, decreased
exposure, and increased exposure.
Using AEB with <u> single shooting:
Press the shutter button three times to takthe three bracketed
shots. The three bracketed shots will be eposed in the following
sequence: Standard exposure, deced eposure, and increased
exposure.
Using AEB with the slf-tim
shots will be taken continuously after 10 sec. or 2 sec. With <q>
(p.87) set, the number of continuous shots will be three times the
number set.
Neither flash nor bulb exposures can be used with AEB.
[Disable], the AEB’s effect might be minimal.
Download from Www.Somanuals.com. All Manuals Search And Download.
104
A Locking the ExposureN
You can lock the exposure when the area of focus is to be different from
the exposure metering area or when you want to take multiple shots at
the same exposure setting. Press the <A> button to lock the exposure,
then recompose and take the shot. This is called AE (autoexposure)
lock. It is effective for backlit subjects.
Focus the subject.
Press the shutter button halfway.
X The exposure setting will be
1
displayed.
Press the <A> button. (0)
2
X The <A> icon lights in the viewfinder
to indicate that the exposure setting is
locked (AE lock).
Each timyou press the <A> button,
is thcurrent autoexposure
seng.
Recompose and take the picture.
3
If you want to maintain the AE lock
while taking more shots, hold down
the <A> button and press the shutter
button to take another shot.
AE Lock Effects
AF Point Selection Method (p.83)
Automatic Selection Manual Selection
Metering Mode
AE lock is applied at the AF AE lock is applied at the
point that achieved focus. selected AF point.
q*
AE lock is applied at the center AF point.
we
*
When the lens’ focus mode switch is set to <MF>, AE lock is applied at the center AF point.
Download from Www.Somanuals.com. All Manuals Search And Download.
105
A Locking the Flash ExposureN
If the subject is on the side of the frame and you use flash, the subject may
turn out to be too bright or dark depending on the background, etc. This is
when you should use FE lock. After setting the proper flash exposure for
the subject, you can recompose (put the subject toward the side) and
shoot. This feature can also be used with a Canon EX-series Speedlite.
* FE stands for Flash Exposure.
Press the <D> button.
1
X The built-in flash will rise.
Press the shutter button halfway and
look in the viewfinder to check that
the <D> icon is lit.
Focus the subject.
2
3
Press the <A> button. (8)
Aim iewfnder center over the
bjewhere you want to lock the flash
sure, then press the <A> button.
X Tflash will fire a preflash and the
required flash output is calculated
and retained in memory.
X In the viewfinder, “FEL” is displayed
for a moment and <d> will light.
Each time you press the <A> button, a
preflash is fired and the required flash output
is calculated and retained in memory.
Take the picture.
4
Compose the shot and press the
shutter button completely.
X The flash is fired when the picture is
taken.
If the subject is too far away and beyond the effective range of the flash, the
<D> icon will blink. Get closer to the subject and repeat steps 2 to 4.
Download from Www.Somanuals.com. All Manuals Search And Download.
106
3
Correcting the Brightness and Contrast AutomaticallyN
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. This feature is called Auto
Lighting Optimizer. The default setting is [Standard]. With JPEG images,
the correction is done when the image is captured. For RAW images, it can
be corrected with Digital Photo Professional (provided software, p.270).
Select [Auto Lighting Optimizer].
Under the [2] tab, select [Auto
1
Lighting Optimizer], then press
<0>.
Select the setting.
Select the desired setting, then press
2
<0>.
Take the picture.
Timage will be recorded with the
3
brtness and contrast corrected if
ecessary.
Without correction
With correction
Under [7 Custom Functions (C.Fn)], if [5: Highlight tone priority] is
set to [1: Enable], the Auto Lighting Optimizer will be set automatically to
[Disable] and you cannot change this setting.
Depending on the shooting conditions, noise might increase.
If a setting other than [Disable] is set and you use exposure
compensation, flash exposure compensation, or manual exposure to
darken the exposure, the image might still come out bright. If you want a
darker exposure, set [Auto Lighting Optimizer] to [Disable] first.
In Basic Zone modes, [Standard] is set automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
107
3 Correcting the Image’s Dark Corners
Due to the lens characteristics, the four corners of the picture might look
darker. This phenomenon is called lens light fall-off or drop in peripheral
illumination and can be corrected automatically. The default setting is
[Enable]. With JPEG images, the correction is done when the image is
captured. For RAW images, it can be corrected with Digital Photo
Professional (provided software, p.270).
Select [Peripheral illumin.
correct.].
Under the [1] tab, select
[Peripheral illumin. correct.], then
press <0>.
1
Select the setting.
2
On the scren, check that
[Correctiodata available] is
dispd for he attached lens.
Coection data not available] is
ayed, see “About the Lens
Correction Data” on the next page.
Select [Enable], then press <0>.
Take the picture.
The image will be recorded with the
3
corrected peripheral illumination.
Correction disabled
Correction enabled
Download from Www.Somanuals.com. All Manuals Search And Download.
108
3 Correcting the Image’s Dark Corners
About the Lens Correction Data
The camera already contains lens peripheral illumination correction
data for about 25 lenses. In step 2, if you select [Enable], the peripheral
light correction will be applied automatically for any lens whose
correction data has been registered in the camera.
With EOS Utility (provided software, p.270), you can check which
lenses have their correction data registered in the camera. You can also
register the correction data for unregistered lenses. For details, see the
Software Instruction Manual (CD-ROM) for EOS Utility (p.272).
For JPEG images aready captured, lens peripheral illumination
correction cannot be applied.
Depending on shooting conditions, noise might appear on the image
periphery.
When using a non-Canon lens, setting the correction to [Disable] is
recommended, even if [Correction data available] is displayed.
Lens peripheral light correction is also applied when an Extender is
attached.
If the correction data for the attached lens has not been registered to the
camera, the result will be the same as when the correction is set to
[Disable].
The correction amount applied will be slightly lower than the maximum
correction amount settable with Digital Photo Professional (provided
software).
If the lens does not have distance information, the correction amount will
be lower.
The higher the ISO speed, the lower the correction amount will be.
Download from Www.Somanuals.com. All Manuals Search And Download.
109
A Customizing Image CharacteristicsN
You can customize a Picture Style by adjusting individual parameters
like [Sharpness] and [Contrast]. To see the resulting effects, take test
Select [Picture Style].
1
Under the [2] tab, select [Picture
Style], then press <0>.
X The Picture Style selection screen will
appear.
Select a Picture Style.
2
Select a Picture Style, then press the
<B> button.
X The Detail st. screen will appear.
Sa parameter.
3
Select a parameter such as
[Sharpness], then press <0>.
Set the parameter.
4
Press the <U> key to adjust the
parameter as desired, then press
<0>.
Press the <M> button to save
the adjusted parameters. The Picture
Style selection screen will reappear.
X Any parameter settings different from
the default will be displayed in blue.
Download from Www.Somanuals.com. All Manuals Search And Download.
110
A Customizing Image CharacteristicsN
Parameter Settings and Effects
Sharpness
Adjusts the sharpness of the image.
To make it less sharp, set it toward the E end. The closer it is to E,
the softer the image will look.
To make it sharper, set it toward the F end. The closer it is to F, the
sharper the image will look.
Contrast
Adjusts the image contrast and the vividness of colors.
To decrease the contrast, set it toward the minus end. The closer it is
to G, the blander the image will look.
To increase the contrast, set it toward the plus end. The closer it is to
H, the crisper the image will look.
Saturation
The image’s color saturation be adjusted.
To decrease the color saton, et it toward the minus end. The
closer it is to G, the more d the colors will look.
To increase the colosaturation, set it toward the plus end. The
closer it is to H, the boldr the colors will look.
Color tone
The skin tones can be adjusted.
To make the skin tone redder, set it toward the minus end. The
closer it is to G, the redder the skin tone will look.
To make the skin tone less red, set it toward the plus end. The closer
it is to H, the more yellow the skin tone will look.
By selecting [Default set.] in step 3, you can revert the respective
Picture Style to its default parameter settings.
select the modified Picture Style and then shoot.
Download from Www.Somanuals.com. All Manuals Search And Download.
111
A Customizing Image CharacteristicsN
V Monochrome Adjustment
For Monochrome, you can also set [Filter effect] and [Toning effect] in
addition to [Sharpness] and [Contrast] explained on the preceding
page.
kFilter Effect
With a filter effect applied to a
monochrome image, you can make
white clouds or green trees stand out
more.
Filter
Sample Effcts
N: None
Normal black-and-white imaith nfilter effects.
The blue sky will look e nral, and the white clouds will look
crisper.
Ye: Yellow
Or: Orange
R: Red
The blue sky will look sy darker. The sunset will look more
brilliant.
The blue sky will look quite dark. Fall leaves will look crisper and
brighter.
Skin tones and lips will look fine. Tree leaves will look crisper and
brighter.
G: Green
Increasing the [Contrast] will make the filter effect more pronounced.
lToning Effect
By applying a toning effect, you can
create a monochrome image in that
color. It can make the image look more
impressive.
You can select the following: [N:None],
[S:Sepia], [B:Blue], [P:Purple] or
[G:Green].
Download from Www.Somanuals.com. All Manuals Search And Download.
112
A
Registering Preferred Image CharacteristicsN
You can select a base Picture Style such as [Portrait] or [Landscape],
adjust its parameters as desired and register it under [User Def. 1],
[User Def. 2], or [User Def. 3].
You can create Picture Styles whose parameter settings such as
sharpness and contrast are different. You can also adjust the
parameters of a Picture Style which has been registered to the camera
with EOS Utility (provided software, p.270).
Select [Picture Style].
1
Under the [2] tab, select [Picture
Style], then press <0>.
X The Picture Style selection screen will
appear.
Select [User Def.].
2
Select [ser Def. *], then press the
<> btton.
ThDetail set. screen will appear.
Press <0>.
With [Picture Style] selected, press
3
<0>.
Select the base Picture Style.
4
Press the <V> key to select the
base Picture Style, then press <0>.
To adjust the parameters of a Picture
Style which has been registered to
the camera with EOS Utility (provided
software), select the Picture Style
here.
Download from Www.Somanuals.com. All Manuals Search And Download.
113
A Registering Preferred Image CharacteristicsN
Select a parameter.
Select a parameter such as
[Sharpness], then press <0>.
5
Set the parameter.
6
Press the <U> key to adjust the
parameter as desired, then press
<0>.
For details, see “Customizing Image
Pree <M> button to register
mdified Picture Style. The
re Style selection screen will
then reappear.
X The base Picture Style will be
indicated on the right of [User Def. *].
X The name of the Picture Style having
any modified settings (different from
the default) registered under [User
Def. *] will be displayed in blue.
If a Picture Style has already been registered under [User Def. *],
changing the base Picture Style in step 4 will nullify the parameter
settings of the registered Picture Style.
settings will revert to the default. Any Picture Style registered via EOS
Utility (provided software) will have only its modified parameters reverted
to the default setting.
[User Def. *] and then shoot.
Download from Www.Somanuals.com. All Manuals Search And Download.
114
B: Matching the Light SourceN
The function adjusting the color tone so that white objects look white in
the picture is called white balance (WB). Normally, the <Q> (Auto)
setting will obtain the correct white balance. If natural-looking colors
cannot be obtained with <Q>, you can select the white balance to
match the light source or set it manually by shooting a white object.
Press the <XB> button.
1
X [White balance] will appear.
Select the white balance.
Press the <U> key or turn the
2
<6> dial to select the desired white
balance, then press <0>.
The “Approx. ****K” (K: Kelvin)
displayed for the following white
balance ettings <W>, <E>,
<>, <Y> or <U> is the
reective color temperature.
O Custom White Balance
Custom white balance enables you to manually set the white balance
for a specific light source for better accuracy. Do this procedure under
the actual light source to be used.
Photograph a white object.
1
A plain, white object should fill the
viewfinder’s center.
Focus manually and set the standard
exposure for the white object.
You can set any white balance.
Download from Www.Somanuals.com. All Manuals Search And Download.
115
B: Matching the Light SourceN
Select [Custom White Balance].
2
Under the [2] tab, select [Custom
White Balance], then press <0>.
X The custom white balance selection
screen will appear.
Import the white balance data.
Select the image that was captured in
step 1, then press <0>.
3
X On the dialog screen which appears,
select [OK] and the data will be
imported.
When the menu reappears, press the
<M> bton to exit the menu.
Select e custom white balance.
4
s the <XB> button.
Sect [O], then press <0>.
If the exposure obtained in step 1 is way off, a correct white balance
might not be obtained.
If the image was captured while the Picture Style was set to
Instead of a white object, an 18% gray card (commercially available) can
produce a more accurate white balance.
The personal white balance registered with EOS Utility (provided
for the registered personal white balance will be erased.
Download from Www.Somanuals.com. All Manuals Search And Download.
116
2
Adjusting the Color Tone for the Light SourceN
You can correct the white balance that has been set. This adjustment
will have the same effect as using a commercially-available color
temperature conversion filter or color compensating filter. Each color
can be corrected to one of nine levels.
This is for advanced users who are familiar with using color temperature
conversion or color compensating filters.
White Balance Correction
Select [WB Shift/BKT].
Under the [2] tab, select [WB Shift/
BKT], then press <0>.
X The WB correction/WB bracketing
screen will appear.
1
Set whie balance correction.
2
Press the <S> key to move the “ ”
ark to the desired position.
B is for blue, A is amber, M is
magenta, and G is green. The color in
the respective direction will be
Sample setting: A2, G1
corrected.
On the upper right, “Shift” indicates
the direction and correction amount.
Pressing the <B> button will
cancel all the [WB Shift/BKT]
settings.
Press <0> to exit the setting and
return to the menu.
During the white balance correction, <2> will be displayed in the
viewfinder and on the LCD monitor.
One level of the blue/amber correction is equivalent to 5 mireds of a color
temperature conversion filter. (Mired: Measuring unit indicating the
density of a color temperature conversion filter.)
Download from Www.Somanuals.com. All Manuals Search And Download.
117
2 Adjusting the Color Tone for the Light SourceN
White Balance Auto Bracketing
With just one shot, three images having a different color balance can be
recorded simultaneously. Based on the color temperature of the current white
balance setting, the image will be bracketed with a blue/amber bias or
magenta/green bias. This is called white balance bracketing (WB-BKT). White
balance bracketing is possible up to ±3 levels in single-level increments.
Set the white balance bracketing amount.
In step 2 for white balance correction,
when you turn the < > dial, the “ ”
mark on the screen will change to “
6
”
(3 points). Turning the dial to the right sets
the B/A bracketing, and turning it to the
left sets the /G bracketing.
B/A bias ±3 levels
X
On the right, racket” indicates the
brackdirecion and correction amount.
ssig the <B> button will cancel
e [WB Shift/BKT] settings.
Press <0> to exit the setting and
return to the menu.
Bracketing Sequence
The images will be bracketed in the following sequence: 1. Standard
white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard
white balance, 2. Magenta (M) bias, and 3. Green (G) bias.
During WB bracketing, the continuous shooting speed will be slower. The
maximum burst for continuous shooting will also be lower and the number of
possible shots will decrease to one-third the normal number.
You can also set white balance correction and AEB (p.103) together with
white balance bracketing. If you set AEB in combination with white balance
bracketing, a total of nine images will be recorded for a single shot.
Since three images are recorded for one shot, the card will take longer to
record the shot.
“BKT” stands for Bracketing.
Download from Www.Somanuals.com. All Manuals Search And Download.
118
3 Setting the Color Reproduction Range
N
The range of reproducible colors is called the color space. With this
camera, you can set the color space to sRGB or Adobe RGB for
captured images. For normal shooting, sRGB is recommended.
In Basic Zone modes, sRGB is set automatically.
Select [Color space].
1
Under the [2] tab, select [Color
space], then press <0>.
Set the desired color space.
2
Select [sRGB] or [Adobe RGB], then
press <0>.
About Adobe RGB
This color space is maly usecommercial printing and other
industrial uses. This setng inot recommended if you do not know
about image processing, Adobe RGB, and Design rule for Camera File
System 2.0 (Exif 2.21).
The image will look very subdued in a sRGB personal computer
environment and with printers not compatible with Design rule for
Camera File System 2.0 (Exif 2.21). Post-processing of the image with
software will therefore be required.
If the image is captured with the color space set to Adobe RGB, the file
name will start with “_MG_” (first character is an underscore).
The ICC profile is not appended. See explanations about the ICC profile
Download from Www.Somanuals.com. All Manuals Search And Download.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting with the LCD Monitor
(Live View Shooting)
You can shoot while viewing the magon the camera’s
LCD monitor. This is called “Liview shooting”.
Live View shooting is effecr still subjects which do
not move.
If you handhold the camera and shoot while viewing the
LCD monitor, camera shake can cause blurred images.
Using a tripod is recommended.
About Remote Live View Shooting
computer, you can connect the camera to the computer and shoot
remotely while viewing the computer screen. For details, see the
Download from Www.Somanuals.com. All Manuals Search And Download.
121
A Shooting with the LCD Monitor
Display the Live View image.
1
2
3
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
The Live View image will closely
reflect the brightness level of the
actual image you capture.
Focus the subject.
When you press the shutter button
halfway, the camera will focus with
Take tpictre.
ess he shutter button completely.
X picture will be taken and the
ctured image is displayed on the
LCD monitor.
X After the image review ends, the
camera will return to Live View
shooting automatically.
Press the <A> button to exit Live
View shooting.
The image’s field of view is approx. 99% (when the image-recording
quality is set to JPEG 73).
The metering mode will be fixed to evaluative metering for Live View
shooting.
In Creative Zone modes, you can check the depth of field by setting [8:
Assign SET button] to [5: Depth-of-field preview] in the [7 Custom
Functions (C.Fn)].
During continuous shooting, the exposure set for the first shot will also
be applied to subsequent shots.
Using <8> will be the same as using <d>.
Download from Www.Somanuals.com. All Manuals Search And Download.
122
A Shooting with the LCD Monitor
Enabling Live View Shooting
Set [Live View shoot.] to [Enable].
In Basic Zone modes, [Live View
shoot.] will be displayed under [2], and
in Creative Zone modes, it will be
displayed under [z].
Battery Life with Live View Shooting [Approx. number of shots]
Shooting Conditions
Temperature
No Flash
240
50% Flash Use
At 23°C / 73°F
At 0°C / 32°F
220
210
230
The figures above are based on a fuharged Battery Pack LP-E10 and
CIPA (Camera & Imaging Products Aciation) testing standards.
With a fully-charged Battery PP-E10, continuous Live View shooting is
possible for approx. 2 hr. at 23°F and approx. 1 hr. 40 min. at
0°C / 32°F.
During Live View shooting, do not point the lens toward the sun. The
sun’s heat can damage the camera’s internal components.
When flash is used, there will be two shutter sounds, but only one shot
will be taken.
If the camera is not operated for a prolonged period, the power will turn
power off] is set to [Off], the Live View function will terminate
automatically after 30 min. (camera power remains on).
With an HDMI cable (sold separately), you can display the Live View
Download from Www.Somanuals.com. All Manuals Search And Download.
123
A Shooting with the LCD Monitor
About the Information Display
Each time you press the <B> button, the information display will
change.
AF mode
• d : Live mode
AF point (Quick mode)
Magnifying frame
Histogram
• c
:
Face detection Live mode
• f : Quick mode
Shooting mode
Drive mode
Eye-Fi card
transmission
status
White balance
Auto Lighting
Optimizer
FEB
AEB
Image-recording
quality
Exposure
simulation
AE lock
r Flash-ready
b Flash off
Battery check
y Flash exposure
compensation
Highlight tone
priority
0 External flash exposure
compensation
ISO speed
e High-speed sync
Possible shots
Shutter speed
Picture Style
Aperture
Exposure level indicator/
AEB range
When <g> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If <g> is blinking, it indicates that the Live View image is not being
displayed at the suitable brightness due to low- or bright-light conditions.
However, the actual image recorded will reflect the exposure setting.
If flash is used or bulb is set, the <g> icon and histogram will be
grayed out (for your reference). The histogram might not be properly
displayed in low- or bright-light conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
124
A Shooting with the LCD Monitor
Final Image Simulation
The final image simulation reflects the effects of the Picture Style, white
balance, etc., in the Live View image so you can see what the captured
image will look like.
During still photo shooting, the Live View image will automatically reflect
the settings listed below.
Final image simulation during Live View shooting
Picture Style
* All parameters such as sharpness, contrast, color saturation, and color tone
will be reflected.
White balance
White balance correction
Shoot by ambience selection
Shoot by lighting or scene type
Exposure
Depth of field preview (WiFn8-5 set and <0> ON)
Auto Lighting Optimizer
Peripheral illuminatin correction
Highlight tone priority
Download from Www.Somanuals.com. All Manuals Search And Download.
125
Shooting Function Settings
Function settings particular to Live View shooting are explained here.
Q Quick Control
While the image is displayed on the LCD monitor in Creative Zone
modes, pressing the <Q> button will enable you to set the AF mode,
drive mode, white balance, Picture Style, Auto Lighting Optimizer,
image-recording quality, and ISO speed. In Basic Zone modes, you can
set the AF mode and the settings shown in the table on page 63.
Press the <Q> button.
1
X The functions settable with Quick
Control will appear on the left of the
screen.
If the AF mode is <f>, the AF
point will also be displayed. You can
also ect te AF point.
St a function and set it.
2
s the <V> key to select a
function.
X The selected function and Feature
Press the <U> key or turn the
<6> dial to change the setting.
Pressing <0> will display the
respective function’s setting screen.
In Creative Zone modes, if [9: Flash button function] is set to [1: ISO
speed] in [7 Custom Functions (C.Fn)], you can raise the built-in flash
with Quick Control. The ISO speed will be set with the <r> button.
Download from Www.Somanuals.com. All Manuals Search And Download.
126
z Menu Function Settings
The menu options below are displayed.
In Basic Zone modes, the Live View
menu options will be displayed under
[2], and in Creative Zone modes, they
will be displayed under [z].
Live View shooting
You can set Live View shooting to [Enable] or [Disable].
AF mode
Grid display
With [Grid 1l] or [Grid 2m], you cadisplay grid lines. It can
help you level the camera verticor hoizontally.
Metering timerN
You can change holong tposure setting is displayed (AE lock
time). This option is ot dsplayed in Basic Zone modes. (Metering
timer is fixed at 16 sec.)
The settings for these menu options will apply only to Live View
shooting. They do not take effect during viewfinder shooting.
If you select [y Dust Delete Data], [6 Clean manually], [7 Clear
settings], or [7 Firmware Ver.], the Live View shooting will terminate.
Download from Www.Somanuals.com. All Manuals Search And Download.
127
Changing the Autofocus Mode
Selecting the AF Mode
The AF modes available are [Live mode], [u Live mode] (face
If you want to achieve precise focus, set the lens focus mode switch to
Select the AF mode.
Under the [z] tab, select [AF mode].
Select the desired AF mode, then
press <0>.
While the Live View image is
displayed, you can press the <Q>
button to seect the AF mode on the
Live Mode: d
The image sensor is used o focus. lthough AF is possible with the
Live View image displayed, he AF operation will take longer than
with the Quick mode. Also, achieving focus may be more difficult than
with the Quick mode.
Display the Live View image.
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
1
X The AF point < > will appear.
Move the AF point.
2
Press the <S> key to move the AF
AF point
point to where you want to focus (it
cannot go to the edges of the picture).
To return the AF point to the center,
press <0>. (If C.Fn-8 has been set,
press <O> + <0>.)
Download from Www.Somanuals.com. All Manuals Search And Download.
128
Changing the Autofocus Mode
Focus the subject.
3
Aim the AF point over the subject and
press the shutter button halfway.
X When focus is achieved, the AF point
will turn green and the beeper will
sound.
X If focus is not achieved, the AF point
will turn orange.
Take the picture.
4
Check the focus and exposure, then
press the shutter button completely to
u (Face detection) Live e: c
With the same AF methd as the Live mode, human faces are detected
and focused. Have the target person face the camera.
Display the Live View image.
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
1
When a face is detected, the <p>
frame will appear over the face to be
focused.
If multiple faces are detected, <q>
will be displayed. Press the <U>
key to move the <q> frame over
the desired target face.
Download from Www.Somanuals.com. All Manuals Search And Download.
129
Changing the Autofocus Mode
Focus the subject.
2
3
Press the shutter button halfway and
the camera will focus the face
covered by the <p> frame.
X When focus is achieved, the AF point
will turn green and the beeper will
sound.
X If focus is not achieved, the AF point
will turn orange.
If a face cannot be detected, the AF
point < > will be displayed and AF
will be executed at the center.
Take the picture.
Check the fcus and exposure, then
press e shtter button completely to
If the focus is way off, face detection will not be possible. If the lens
enables manual focusing even while the lens focus mode switch is set to
<f>, turn the focusing ring to attain rough focus. The face will then be
detected and <p> will be displayed.
An object other than a human face might be detected as a face.
Face detection will not work if the face is very small or large in the picture,
too bright or too dark, titled horizontally or diagonally, or partially hidden.
The <p> focusing frame might cover only part of the face.
When you press <0>, the AF mode will switch to the Live mode
again to return to the u (face detection) Live mode. (If C.Fn-8 has been
set, press <O> + <0>.)
Since AF is not possible with a face detected near the edge of the
picture, the <p> will be grayed out. Then if you press the shutter button
halfway, the center AF point < > will be used to focus.
Download from Www.Somanuals.com. All Manuals Search And Download.
130
Changing the Autofocus Mode
Live Mode and
AF operation
u
(Face Detection) Live Mode Notes
Focusing will take slightly longer.
Even when focus has been achieved, pressing the shutter button
halfway will focus again.
The image brightness may change during and after the AF
operation.
If the light source changes while the Live View image is displayed,
the screen might flicker and focusing may be difficult. If this
happens, stop the Live View shooting and autofocus under the
actual light source first.
If you press the <u> button in the Live mode, the image will be
magnified at the AF point. If focusing is difficult in the magnified view,
return to the normal view and autofocu. Note that the AF speed
may differ between the normal amanified views.
If you autofocus in the Live modnormal view and then magnify
the image, the focus mighff.
In the u Live modepresse <u> button will not magnify the
image.
In the Live mode or u (face detection) Live mode, if you shoot a
peripheral subject and it is slightly out of focus, aim the center AF point
over the subject to focus, then take the picture.
The AF-assist beam will not be emitted. However, if an EX-series
Speedlite (sold separately) equipped with a LED light is used, the LED
light will turn on for AF-assist when necessary in the Live mode and u
(face detection) Live mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
131
Changing the Autofocus Mode
Shooting conditions which can make focusing difficult:
Low-contrast subjects such as the blue sky and solid-color, flat
surfaces.
Subjects in low light.
Stripes and other patterns where there is contrast only in the
horizontal direction.
Under a light source whose brightness, color, or pattern keeps
changing.
Night scenes or points of light.
Under fluorescent lighting or when the image flickers.
Extremely small subjects.
Subjects at the edge of the picture.
Subjects strongly reflecting light.
The AF point covers both a near and faraway subject (such as an
animal in a cage).
Subjects which keep moving within te AF oint and cannot keep
still due to camera shake or subject r.
A subject approaching or mowy from the camera.
Autofocusing while the subjecay out of focus.
Soft focus effect is appled with a soft focus lens.
A special effects filter is used.
Download from Www.Somanuals.com. All Manuals Search And Download.
132
Changing the Autofocus Mode
Quick Mode: f
The dedicated AF sensor is used to focus in One-Shot AF mode (p.81),
using the same AF method as with viewfinder shooting.
Although you can focus the target area quickly, the Live View image
will be interrupted momentarily during the AF operation.
AF point
Display the Live View image.
1
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
The small boxes on the screen are
the AF points, and the larger box is
the magnifying frame.
Magnifying frame
lecthe AF point. N
2
ress the <Q> button (7) to
display the Quick Control screen.
X The settable functions will be
displayed on the left of the screen.
Press the <V> key to make the AF
point selectable.
Turn the <6> dial to select the AF
point.
Download from Www.Somanuals.com. All Manuals Search And Download.
133
Changing the Autofocus Mode
Focus the subject.
3
Aim the AF points over the subject
and press the shutter button halfway.
X The Live View image will turn off, the
reflex mirror will go back down, and
AF will be executed.
X When focus is achieved, the AF point
which achieved focus will turn green
and the Live View image will
reappear.
X If focus is not achieved, the AF point
will turn orange and blink.
Take the picure.
4
Checthe fcus and exposure, then
prese shuter button completely to
You cannot take a picture during autofocusing. Take the picture while the
Live View image is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
134
MF: Focusing Manually
You can magnify the image and focus precisely manually.
Set the lens focus mode switch to
<MF>.
Turn the lens focusing ring to focus
1
roughly.
Move the magnifying frame.
2
Press the <S> key to move the
magnifying frame to the position
where you want to focus.
To return the magnifying frame to the
center, press <0>. (If C.Fn-8 has
been sepress <O> + <0>.)
Magnifying frame
May thimage.
Prss the <u> button.
he area within the magnifying frame
3
will be magnified.
Each time you press the <u> button,
the view will change as follows:
5x
10x
Normal view
Focus manually.
4
5
While looking at the magnified image,
turn the lens focusing ring to focus.
After achieving focus, press the <u>
button to return to the normal view.
AE lock
Magnified area position
Take the picture.
Magnification
Check the focus and exposure, then
press the shutter button to take the
Download from Www.Somanuals.com. All Manuals Search And Download.
135
Live View Shooting Cautions
White <s> and Red <E> Internal Temperature Warning Icons
If the camera’s internal temperature increases due to prolonged Live
View shooting or a high ambient temperature, a white <s> icon will
appear. If you continue shooting while this icon is displayed, the image
quality of still photos may deteriorate. You should stop the Live View
shooting and allow the camera to cool down before shooting again.
If the camera’s internal temperature further increases while the white
<s> icon is displayed, a red <E> icon will start blinking. This blinking
icon is a warning that the Live View shooting will soon be terminated
automatically. If this happens, you will not be able to shoot again until the
camera’s internal temperature decreases. Turn off the power and let the
camera rest for a while.
Shooting with the Live View function at a high temperature for a
prolonged period will cause the <s> and <E> icons to appear earlier.
When not shooting, turn off the camera.
Live View Image Cautions
Under low- or bright-light con, tLive View image might not
reflect the brightness of the cimage.
If the light source withithe imagchanges, the screen might flicker. If
this happens, stop the Lve Vew shooting and resume shooting under
the actual light source to be used.
If you point the camera in a different direction, it might throw off the Live
View image’s correct brightness momentarily. Wait until the brightness
level stabilizes before shooting.
If there is a very bright light source in the picture, such as the sun, the
bright area might appear black on the LCD monitor. However, the actual
captured image will correctly show the bright area.
In low light, if you set the [6 LCD brightness] to a bright setting,
chrominance noise may appear in the Live View image. However, the
chrominance noise will not be recorded in the captured image.
When you magnify the image, the image sharpness may look more
pronounced than it really is.
Download from Www.Somanuals.com. All Manuals Search And Download.
136
Live View Shooting Cautions
Shooting Result Cautions
When you shoot continuously with the Live View function for a long
period, the camera’s internal temperature may increase and it can
degrade image quality. Terminate Live View shooting when not shooting
images.
Before taking a long exposure, stop Live View shooting temporarily and
wait several minutes before shooting. This is to prevent image
degradation.
Live View shooting in high temperatures and at high ISO speeds may
cause noise or irregular colors.
When you shoot at high ISO speeds, noise (banding, dots of light, etc.)
may become noticeable.
If you take the picture during magnified view, the exposure might not
come out as desired. Return to the normaview before taking the picture.
During the magnified view, the shutter sped and aperture will be
displayed in orange. Even if you the pcture during magnified view,
the image will be captured he nmal view.
image may look brht even ecreased exposure compensation or
decreased flash exosure compensation has been set.
If you use a TS-E lens to shift the lens vertically or use an Extension
Tube, the standard exposure might not be obtained or an irregular
exposure may result.
Custom Function Cautions
During Live View shooting, certain Custom Function settings will not take
Lens and Flash Cautions
The focus preset feature on super telephoto lenses cannot be used.
FE lock is not possible when the built-in flash or an external Speedlite is
used. Modeling flash will not work with an external Speedlite.
Download from Www.Somanuals.com. All Manuals Search And Download.
137
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Movies
When yoset te Mode Dial to
<k>, ycan shoot High-
Den HD) movies. The
movcording format will be
MOV.
Cards which can record movies
When shooting movies, use a large-capacity SD card rated SD
Speed Class 6 “ ” or higher.
If you use a slow-writing card when shooting movies, the movie
might not be recorded properly. And if you playback a movie on a
card having a slow reading speed, the movie might not playback
properly.
To check the card’s read/write speed, refer to the card
manufacturer’s Web site.
Download from Www.Somanuals.com. All Manuals Search And Download.
139
k Shooting Movies
When you set the shooting mode to <k>, you can easily shoot High-
Definition (HD) movies with autoexposure. When playing movies,
Set the Mode Dial to <k>.
1
X The reflex mirror will make a sound,
then the image will appear on the
LCD monitor.
Focus the subject.
2
Before shooting a movie, autofocus
When you press the shutter button
halfway, the camera will focus with
the current AF mode.
Shoot the mvie.
3
Prese <A> button to start
oting a movie. To stop movie
ting, press <A> again.
X While the movie is being shot, the
“o” mark will be displayed on the
upper right of the screen.
Recording movie
Microphone
Download from Www.Somanuals.com. All Manuals Search And Download.
140
k Shooting Movies
In the movie shooting mode, you cannot take a still photo even if you
press the shutter button completely.
During movie shooting, do not point the lens toward the sun. The sun’s
heat can damage the camera’s internal components.
If necessary, also read the Live View shooting cautions on pages
A movie file is recorded each time you shoot a movie.
The image’s field of view is approx. 99%.
The ISO speed, shutter speed, and aperture are set automatically.
lock during movie shooting, press the <S> button.
By holding down the <O> button and turning the <6> dial, you can
set the exposure compensation.
When you press the shutter button halfwy, the exposure setting
displayed at the screen bottom iyour eference.
The sound will be recorded y the mera’s built-in monaural
The sound recording level adjusted automatically.
With a fully-chargeBattery Pack LP-E10, the total shooting time will be
as follows: At 23°C/73°F: Approx. 1 hr. 50 min., At 0°C/32°F: Approx.
1 hr. 30 min.
Using an EX-series Speedlite (Sold Separately) Equipped with a LED Light
This camera is compatible with the function turning on the LED light
automatically in low-light conditions. For details, see the EX
Speedlite’s instruction manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
141
k Shooting Movies
About the Information Display
Each time you press the <B> button, the information display will
change.
Movie shooting mode
Frame rate
Movie shooting remaining time/
Elapsed time
AF mode
• d : Live mode
• c : Face detection
AF point (Quick mode)
Magnifying frame
Live mode
• f : Quick mode
Recording
movie
White balance
Picture Style
Auto Lighting
Optimizer
Movie recording size
AE lock
Battery check
Movie
autoexposure
LED light
Shutter speed
Aperture
Eye-Fi card
transmission
status
ISO speed
Exposure compensation amount
If there is no card in the camera, the movie shooting remaining time will
be displayed in red.
When movie shooting starts, the movie shooting remaining time will
change to the elapsed time.
Download from Www.Somanuals.com. All Manuals Search And Download.
142
k Shooting Movies
Final Image Simulation
The final image simulation reflects the effects of the Picture Style, white
balance, etc., in the movie image so you can see what the captured
movie will look like.
During movie shooting, the movie image will automatically reflect the
settings listed below.
Final image simulation for movie shooting
Picture Style
* All parameters such as sharpness, contrast, color saturation, and color tone
will be reflected.
White balance
Exposure
Depth of field
Auto Lighting Optimizer
Peripheral illumination correctio
Highlight tone priority
Download from Www.Somanuals.com. All Manuals Search And Download.
143
Shooting Function Settings
Function settings particular to movie shooting are explained here.
Q Quick Control
While the movie image is displayed on the LCD monitor, you can press
the <Q> button to enable the following to be set: AF mode, white
balance, Picture Style, and Auto Lighting Optimizer.
Press the <Q> button. (7)
1
X The functions settable with Quick
Control will appear on the left of the
screen.
If the AF mode is <f>, the AF
point will also be displayed.
Select a funion and set it.
2
Prese <V> key to select a
tion.
X selected function and Feature
Press the <U> key or turn the
<6> dial to change the setting.
Pressing <0> will display the
respective function’s setting screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
144
3 Menu Function Settings
The menu options displayed under the [w], [x], and [y] tabs are
explained below.
[w] tab
AF mode
The AF modes will be the same as described on pages 128-134.
You can select [Live mode], [u Live mode], or [Quick mode]. Note
that continuous focusing of a moving subject is not possible.
AF with shutter button during k (movie recording)
When [Enable] is set, AF is possible ding movie shooting.
However, continuous autofocusis not possible. If you autofocus
during movie shooting, yoht momentarily throw the focus way
off or change the exposuremovie will also record the lens
operation noise.
During movie shooting, if the [Quick mode] AF mode is set, AF will
be executed in [Live mode].
The settings under the [w/x/y] menu tabs will take effect only
in the <k> mode. They will not be applied in shooting modes other
than the <k> mode.
The [AF mode] setting will also be applied to Live View shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
145
3 Menu Function Settings
kShutter/AE lock button
You can change the function assigned to the shutter button’s halfway
position and to the AE lock button.
• AF/AE lock:
Normal function. Press the shutter button halfway to execute AF.
Press the <w> button for AE lock.
• AE lock/AF:
Press the shutter button halfway for AE lock. For AF, press the
<w> button. Convenient when you want to focus and meter at
different parts of the picture.
• AF/AF lock, no AE lock:
Press the shutter button halfway to execute AF. While you
autofocus by pressing the shutter button halfway, you can pause
the autofocus by holding down the <w> button. You can resume
the autofocus by letting go of the > bton. AE lock is not
possible.
• AE/AF, no AE lock:
Press the shutter buton halfwfor metering. For AF, press the
<w> button. AE lock inopossible.
kHighlight tone priority
If [Enable] is set, highlight detail will be improved. The dynamic
range is expanded from the standard 18% gray to bright highlights.
The gradation between the grays and highlights becomes smoother.
The settable ISO speed range will be ISO 200-6400. The Auto
Lighting Optimizer will also be set automatically to [Disable] and
cannot be changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
146
3 Menu Function Settings
[x] tab
Movie recording size
The movie will be recorded in [1280x720] High-Definition (HD)
quality. You can select the frame rate [6] or [5] (recorded frames
per second) to suit your TV set’s video format.
* The frame rate is expressed as fps or frames per second.
[6] : For areas where the TV video format is NTSC (North
America, Japan, Korea, Mexico, etc.).
[5] : For areas where the TV video format is PAL (Europe,
Russia, China, Australia, etc.
Total Movie Recording Time aFile Size per Minute
Due to the file system, moooting will stop automatically if the
file size of a single movie caches 4GB.
You can immediately resume shooting another movie by pressing
the <A> button. (A new movie file starts being recorded.)
Total Recording Time (approx.)
Movie-recording
Size
File Size
(approx.)
4GB Card
17 min.
8GB Card
16GB Card
[1280x720] 65
34 min.
1 hr. 8 min. 222.6 MB/min.
An increase of the camera’s internal temperature may cause movie
shooting to stop before the maximum recording time shown in the table
The maximum recording time of one movie clip is 29 min. 59 sec.
Movie shooting in Full High-Definition (Full HD) or Standard Definition
(SD) quality is not possible.
can extract still photos from a movie. The quality of the extracted still
photo will be [1280x720] for about 920,000 pixels.
Download from Www.Somanuals.com. All Manuals Search And Download.
147
3 Menu Function Settings
Sound recording
When the sound recording is set to [On], sound will be recorded by
the built-in monaural microphone. The sound recording level will be
adjusted automatically. An external microphone cannot be used.
Metering timer
You can change how long the exposure setting is displayed (AE lock
time).
Grid display
With [Grid 1l] or [Grid 2m], you can display grid lines. It can
help you level the camera vertically or horizontally.
The sound will be recorded at a 48 kHz sampling frequency and 16-bit
for both L and R.
The Metering timer and Grid display settings will also be reflected in Live
View shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
148
3 Menu Function Settings
[y] tab
Exposure compensation
You can set exposure compensation for movies up to ±3 stops in
1/3-stop increments.
Auto Lighting Optimizer
The Auto Lighting Optimizer can be set as explained on page 107.
If the [w] menu tab’s [kHighlight tone priority] is set to
[Enable], the Auto Lighting Optimizer will be set automatically to
[Disable] and cannot be changed.
Custom White Balance
be selected. Note that stilos annot be taken in the <k>
mode. Set a shooting moder than <k> and take a still photo.
Then select it for the custom white balance.
Picture Style
The Picture Style can be set as explained on pages 79.
Download from Www.Somanuals.com. All Manuals Search And Download.
149
About the Red <E> Internal Temperature Warning Icon
If the camera’s internal temperature is high, a blinking red icon <E> may
appear. This blinking icon is a warning that the movie shooting will soon
be terminated automatically. If this happens, you will not be able to shoot
again until the camera’s internal temperature decreases. Turn off the
power and let the camera rest for a while.
Movie shooting at a high temperature for a prolonged period will cause
the <E> icon to appear sooner. When not shooting, turn off the camera.
Movie Shooting Cautions
Recording and Image Quality
If the attached lens has an Image Stabilizer, the Image Stabilizer will
operate at all times even if you do not press the shutter button halfway.
The Image Stabilizer will thereby consume battery power and may
shorten the total movie shooting time or decrease the number of possible
shots. If you use a tripod or if the ImStabizer is not necessary, you
should set the IS switch to <2>.
The camera’s built-in microphill aso record camera operation
noise.
If movie shooting is nopossible due to insufficient remaining capacity of
the card, the movie recordinsize and movie shooting remaining time
(p.142) will be displayed in red.
If you use a card having a slow writing speed, a five-level
indicator might appear on the right of the screen during
movie shooting. It indicates how much data has not yet been
written to the card (remaining capacity of the internal buffer
memory). The slower the card, the faster the indicator will
climb upward. If the indicator becomes full, movie shooting
will stop automatically.
Indicator
If the card has a fast writing speed, the indicator will either
not appear or the level (if displayed) will hardly go upward.
First, shoot a few test movies to see if the card can write fast enough.
Download from Www.Somanuals.com. All Manuals Search And Download.
150
Movie Shooting Cautions
Playback and TV connection
If the brightness changes during movie shooting, that part might look
momentarily still when you playback the movie.
shoot a movie, the movie being shot will be displayed at a small size on
the TV. But the movie will still be properly recorded in High-Definition
(HD) quality.
If you connect the camera to a TV set and shoot a movie, the TV will not
output any sound during the shooting. However, the sound will be
properly recorded.
Download from Www.Somanuals.com. All Manuals Search And Download.
151
Download from Www.Somanuals.com. All Manuals Search And Download.
Handy Features
3 Silencing the Beeper
You can prevent the beeper from sounding when focus is achieved or
during self-timer operation.
Under the [1] tab, select [Beep], then
press <0>. Select [Disable], then
press <0>.
3 Card Reminder
This prevents shooting if there is no card in the camera.
Under the [1] tab, select [Release
shutter without card], then press
<0>. Select [isable], then press
<0>.
If there io card installed and you press
thttebutton, “Card” will be
disd in the viewfinder, and you
cnnot release the shutter.
3 Setting the Image Review Time
You can set how long the image is displayed on the LCD monitor
immediately after capture. If [Off] is set, the image will not be displayed
immediately after image capture. If [Hold] is set, the image review will
be displayed up until the [Auto power off] time.
During image review, if you operate any camera controls such as
pressing the shutter button halfway, the image review will end.
Under the [1] tab, select [Image
review], then press <0>. Select the
desired setting, then press <0>.
Download from Www.Somanuals.com. All Manuals Search And Download.
154
Handy Features
3 Setting the Auto Power-off Time
To save battery power, the camera turns off automatically after the set
time of idle operation elapses. You can set this auto power-off time.
When the camera has turned off due to auto power off, you can wake it
up by pressing the shutter button halfway or pressing any of the
following buttons: <M>, <x>, <A>, etc.
If [Off] has been set, either turn off the camera yourself or press
the <B> button to turn off the LCD monitor to save battery
power.
Even if [Off] has been set and the camera is not used for 30 min.,
the LCD monitor will turn off automatically. To turn on the LCD
monitor again, press the <B> button.
Under the [5] tab, select [Auto power
off], then prss <0>. Select the desired
settihen press <0>.
3 Adjusting the LCD Monitor Brightness
You can adjust the brightness of the LCD monitor to make it easier to read.
Under the [6] tab, select [LCD
brightness], then press <0>. With the
adjustment screen displayed, press the
<U> key to adjust the brightness, then
press <0>.
When checking the exposure of an
image, set the LCD monitor brightness to
4 and prevent the ambient light from
affecting the reviewed image.
Download from Www.Somanuals.com. All Manuals Search And Download.
155
Handy Features
3 Creating and Selecting a Folder
You can freely create and select the folder where the captured images
are to be saved.
This is optional since a folder will be created automatically for saving
captured images.
Create a Folder
Select [Select folder].
1
Under the [5] tab, select [Select
folder], then press <0>.
Select reatfolder].
2
lecCreate folder], then press
>.
Create a new folder.
3
Select [OK], then press <0>.
X A new folder with a higher one-up
folder number is created.
Download from Www.Somanuals.com. All Manuals Search And Download.
156
Handy Features
Selecting a Folder
With the folder selection screen
Lowest file number
displayed, select a folder and press
<0>.
Number of images
in folder
X The folder where the captured
images will be saved is selected.
Subsequent captured images will be
recorded into the selected folder.
Folder name
Highest file number
About Folders
As with “100CANON” for example, the folder name starts with three digits
(folder number) followed by five alphanumeric characters. A folder can contain
up to 9999 images (file No. 0001 - 9999). When a folder becomes full, a new
folder with a higher one-up folder number is created automatically. Also, if
manual reset (p.159) is executed, a new folder will be created automatically.
Folders numbered from 100 to 999 can be created.
Creating Folders with a Personal Computer
With the card open on the screen, create a new folder named “DCIM”. Open
the DCIM folder and create as many folders as necessary to save and
organize your images. The folder name must follow the “100ABC_D” format
where the first three digits is 100 - 999 followed by five alphanumeric
characters. The five characters can be a combination of upper- or lower-case
letters from A to Z, numerals, and an underscore “_”. There can be no space in
the folder name. Also, folder names cannot have the same three-digit number
such as “100ABC_D” and “100W_XYZ” even if the letters are different.
Download from Www.Somanuals.com. All Manuals Search And Download.
157
Handy Features
3 File Numbering Methods
The image files will be numbered from 0001 to 9999 in the order the
images are taken, then saved in a folder. You can change how the file
number is assigned.
The file number will appear on your computer in this format:
IMG_0001.JPG.
Under the [5] tab, select [File
numbering], then press <0>. The
available settings are described below.
Select one, then press <0>.
[Continuous]: The file numbering contiues in sequence even
after you replace the card or creaa folder.
Even after you replace the card or cte a new folder, the file
numbering continues in sequup to 9999. This is convenient
when you want to save imagembered anywhere between 0001
to 9999 in multiple cardor flders into one folder in your personal
computer.
If the replacement card or existing folder already contains images
recorded previously, the file numbering of the new images might
continue from the file numbering of the existing images in the card or
folder. If you want to use continuous file numbering, you should use
a newly-formatted card each time.
File numbering after
replacing the card
File numbering after
creating a folder
Card-1
Card-2
Card-1
100
XXX-0051
101
XXX-0052
XXX-0051
XXX-0052
Next sequential file number
Download from Www.Somanuals.com. All Manuals Search And Download.
158
Handy Features
[Auto reset]: The file numbering is reset to 0001 whenever you
replace the card or create a folder.
Whenever the card is replaced or a new folder created, the file
numbering starts from 0001. This is convenient if you want to
organize images according to cards or folders.
If the replacement card or existing folder already contains images
recorded previously, the file numbering of the new images might
continue from the file numbering of the existing images in the card or
folder. If you want to save images with the file numbering starting
from 0001, use a newly formatted card each time.
File numbering after
replacing the card
File numbering after
creating a folder
Card-1
Card-2
Card-1
100
XXX-0051
101
XXX-0001
XXX-0051
100-0001
File numbering i
[Manual reset]: To eset the file numbering to 0001 manually or
to start from file number 0001 in a new folder.
When you reset the file numbering manually, a new folder is created
automatically and the file numbering of images saved to that folder
starts from 0001.
This is convenient if you want to use different folders for the images
taken yesterday and the ones taken today, for example.
After the manual reset, the file numbering returns to continuous or
auto reset. (There will be no Manual reset confirmation screen.)
If the file number in folder No. 999 reaches 9999, shooting will not be
possible even if the card still has storage capacity. The LCD monitor will
display a message telling you to replace the card. Replace it with a new
card.
For both JPEG and RAW images, the file name will start with “IMG_”. Movie
file names will start with “MVI_”. The extension will be “.JPG” for JPEG
images, “.CR2” for RAW images, and “. MOV” for movies.
Download from Www.Somanuals.com. All Manuals Search And Download.
159
Handy Features
3 Setting Copyright InformationN
When you set the copyright information, it will be appended to the
image as Exif information.
Select [Copyright information].
1
Under the [7] tab, select [Copyright
information], then press <0>.
Select the option to be set.
2
Select [Enter author’s name] or
[Enter copyight details], then press
<0
X The tentry screen will appear.
ct Display copyright info.] to
k the copyright information
currently set.
Select [Delete copyright
information] to delete the copyright
information currently set.
Enter text.
Refer to “Text Entry Procedure” on
3
the next page and enter the copyright
information.
Enter up to 63 alphanumeric
characters and symbols.
Exit the setting.
4
After entering the text, press the
<M> button to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
160
Handy Features
Text Entry Procedure
Changing the entry area:
Press the <Q> button to toggle
between the top and bottom entry
areas.
Moving the cursor:
Press the <U> key to move the
cursor.
Entering text:
In the bottom area, press the <S> key or turn the <6> dial to
select a character, then press <0> to enter it.
Deleting a character:
Press the <L> button to delete one chracter.
Exiting:
After entering the text, prehe M> button to finalize the text
entry and return to the scrstep 2.
Canceling the text ntry
To cancel the text entry, press the <B> button to cancel it and
return to the screen in step 2.
You can also set or check the copyright information with EOS Utility
(provided software, p.270).
Download from Www.Somanuals.com. All Manuals Search And Download.
161
Handy Features
3 Auto Rotation of Vertical Images
Vertical images are rotated automatically so they are
displayed vertically on the camera’s LCD monitor
and on the personal computer instead of horizontally.
The setting of this feature can be changed.
Under the [5] tab, select [Auto rotate],
then press <0>. The available settings
are described below. Select one, then
press <0>.
[OnPD] : The vertical image is automatically rotated during playback
on both the camera’s LCD monitor and on the computer.
[OnD]
: The vertical image is automacally rotated only on the
computer.
[Off]
: The vertical imanoautomatically rotated.
FAQ
The vertical image is not rotated during the image review
immediately after it is captured.
Press the <x> button and the image playback will display the
rotated image.
[OnPD] is set, but the image does not rotate during playback.
Auto rotate will not work with vertical images captured while [Auto
rotate] was set to [Off]. If the vertical image is taken while the camera
is pointed up or down, the image might not be rotated automatically for
playback. In such a case, see “Rotating the Image” on page 179.
On the camera’s LCD monitor, I want to rotate an image
captured when [OnD] had been set.
Set [OnPD], then playback the image. It will be rotated.
The vertical image does not rotate on the computer screen.
The software used is not compatible with image rotation. Use the
software provided with the camera instead.
Download from Www.Somanuals.com. All Manuals Search And Download.
162
Handy Features
B Checking Camera Settings
While the menu is displayed, press the <B> button to display the
camera’s major function settings.
While the menu is displayed, press
the <B> button to display the
settings.
Press the <B> button again to
return to the menu.
Settings display
Card remaining capacity
Color space (p.119)
WB correction (p.117)/
Live View shooting (p.121)
Auto rotate display (p.162)
Date/Time (p.33)
Auto power off (p.155)
Download from Www.Somanuals.com. All Manuals Search And Download.
163
Handy Features
3 Reverting the Camera to the Default SettingsN
The camera’s shooting settings and menu settings can be reverted to
the default. This can be done in Creative Zone modes.
Select [Clear settings].
1
Under the [7] tab, select [Clear
settings], then press <0>.
Select [Clear all camera settings].
2
Select [Clear all camera settings],
then press 0>.
Select [OK].
Select [OK], then press <0>.
X Setting [Clear all camera settings]
will reset the camera to the default
settings on the next page.
3
FAQ
Clearing all camera settings:
After the procedure above, go to [7 Clear settings] and select
[Clear all Custom Func. (C.Fn)] to clear all the Custom Function
Download from Www.Somanuals.com. All Manuals Search And Download.
164
Handy Features
Shooting Settings
One-Shot AF
AF point selection Automatic selection
Image-recording Settings
AF mode
Quality
73
Picture Style
Standard
Drive mode
u
(Single shooting)
Auto Lighting
Optimizer
Standard
q (Evaluative
metering)
Metering mode
Peripheral
illumination
correction
Enable/
Correction data
retained
ISO speed
ISO Auto
AUTO (Auto)
Max.: 3200
Color space
White balance
sRGB
Q (Auto)
Exposure
compensation/AEB
Canceled
0 (Zero)
Flash exposure
compensation
Custom white
balance
Canceled
Custom Functions Unchanged
WB correction
WB-BKT
Canceled
Canceled
Continuous
Erased
File numbering
DusDelete Data
Camera Settings
Auto power off
30 sec.
Beep
Enable
Movie Shooting Settings
Release shutter
without card
Enable
AF mode
Live mode
Image review
Histogram
2 sc.
Brigtnes
AF w/ shutter
button during k
Disable
Image jump w/6 e (10 images)
kShutter/AE lock
button
kHighlight tone
priority
AF/AE lock
Disable
Auto rotate
OnzD
LCD brightness
LCD off/on button Shutter button
Date/Time
Language
Feature guide
Copyright information Unchanged
Control over HDMI Disable
Eye-Fi transmission Disable
My Menu settings Unchanged
Unchanged
Unchanged
Enable
Movie recording size Unchanged
Sound recording On
Metering timer
Grid display
16 sec.
Off
Exposure
compensation
Canceled
Standard
Auto Lighting
Optimizer
Live View Shooting Settings
Live View shooting Enable
Custom white
balance
Canceled
Standard
AF mode
Grid display
Metering timer
Live mode
Off
16 sec.
Picture Style
Download from Www.Somanuals.com. All Manuals Search And Download.
165
Handy Features
3 Turning the LCD monitor Off/On
The shooting settings display (p.46) can be turned on or off by pressing
the shutter button halfway.
Under the [6] tab, select [LCD off/on
btn], then press <0>. The available
settings are described below. Select one,
then press <0>.
[Shutter btn.] : When you press the shutter button halfway, the
display will turn off. And when you let go of the
shutter button, the display will turn on.
[Shutter/DISP]: When you press the shutter button halfway, the
display will turn off. And when you let go of the
shutter button, the display will remain off. To turn on
the display, press tB> button.
[Remains on] : Display remaion en when you press the shutter
button halfwaurn off display, press the <B>
button.
3 Changing the Shooting Settings Screen Color
You can change the background color of the shooting settings screen.
Under the [5] tab, select [Screen
color], then press <0>. Select the
desired color, then press <0>.
When you exit the menu, the selected
color will be displayed for the shooting
settings screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
166
3 Setting the FlashN
The built-in flash and external Speedlite settings can be set with the
camera’s menu. You can use the camera’s menu to set the external
Speedlite function settings only if the attached EX-series Speedlite is
compatible with this function.
The setting procedure is the same as setting a camera menu function.
Select [Flash control].
Under the [1] tab, select [Flash
control], then press <0>.
X The flash control screen will appear.
[Flash firing]
Normallset this to [Enable].
Isabl] is set, neither the built-
in ash nor the external Speedlite
ill fire. This is useful when you only
want to use the flash’s AF-assist
beam.
[Built-in flash func. setting] and [External flash func. setting]
With [Built-in flash func. setting] and [External flash func. setting],
you can set the functions listed on the next page. The functions
displayed under [External flash func. setting] will vary depending on
the Speedlite model.
Select [Built-in flash func. setting]
or [External flash func. setting].
X The flash functions will be displayed.
The functions not dimmed can be
selected and set.
Even if [Flash firing] has been set to [Disable], if focus is difficult to achieve
in low light, the built-in flash may still fire a series of flashes (AF-assist
Download from Www.Somanuals.com. All Manuals Search And Download.
167
3 Setting the FlashN
[Built-in flash func. setting] and [External flash func.
setting] Settable Functions
[Built-in flash
func. setting]
[External flash
func. setting]
Function
Page
Flash mode
E-TTL II (Fixed)
k
—
Shutter sync.
FEB*
k
—
k
Flash exposure
compensation
k
k
E-TTL II meter.
Zoom*
—
—
—
k
k
Wireless setting*
—
* Regarding [FEB] (Flash exposure bracketing), [Zoom], and [Wireless set.],
refer to the Speedlite’s instruction manual.
Flash mode
With an external Speedlite, yocan lect the flash mode suiting
your objective.
[TL II] is the standard mode of
EX-series Speedlites for automatic
flash shooting.
[Manual flash] enables you to set the
flash output yourself. This is for
advanced users.
For other flash modes, refer to your
Speedlite’s instruction manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
168
3 Setting the FlashN
Shutter sync.
Normally, set this to [1st curtain] so that the flash fires immediately
after the exposure starts.
If [2nd curtain] is set, the flash will fire right before the exposure
ends. When this is combined with a slow sync speed, you can create
a trail of light such as from car headlights at night. With 2nd-curtain
sync, a preflash is fired when you press the shutter button
completely. This is to determine the exposure. Then immediately
before the exposure ends, the real flash is fired. Therefore, two
flashes will be fired. However, with shutter speeds faster than 1/30
sec., 1st curtain sync will automatically take effect.
If an external Speedlite is attached, you can also set [Hi-speed]. For
details, see the Speedlite’s instruction manual.
Flash exposure compensation
E-TTL II flash metering
For normal flash exposureet io [Evaluative]. [Average] is for
advanced users. As with aernal Speedlite, the metering area is
averaged. Flash exosure compensation may be necessary.
Clear flash settings
On the [External flash func. setting] screen, press the <B>
button to display the screen to clear the flash settings. When you
select [OK], the settings for the built-in flash and external
Speedlite will be cleared.
Download from Www.Somanuals.com. All Manuals Search And Download.
169
3 Setting the FlashN
Setting the External Speedlite Custom Functions
The Custom Functions displayed under [External flash C.Fn setting]
will vary depending on the Speedlite model.
Display the Custom Function.
1
Select [External flash C.Fn setting],
then press <0>.
Set the Custom Function.
2
Press the <U> key to select the
function number, then set the
function. Thprocedure is the same
as sg thcamera’s Custom
ear all the Custom Function
settings, select [Clear ext. flash C.Fn
set.] in step 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
170
3 Appending Dust Delete DataN
Dust entering the camera can adhere to the image sensor and cause
dust spots to be visible on the captured images. To erase these dust
spots, you can append the Dust Delete Data to the images. The Dust
Delete Data is used by Digital Photo Professional (provided software,
p.270) to erase the dust spots automatically.
Preparation
Get a solid-white object (paper, etc.).
Set the lens focal length to 50mm or longer.
Set the lens focus mode switch to <MF> and set the focus to infinity
(∞). If the lens has no distance scale, look at the front of the lens and
turn the focusing ring clockwise all the way.
Obtain the Dust Delete Data
Sele[Dut Delete Data].
1
Uner the [y] tab, select [Dust
elete Data], then press <0>.
Select [OK].
Select [OK], then press <0>.
2
Instructions will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
171
3 Appending Dust Delete DataN
Photograph a solid-white object.
3
At a distance of 20 cm - 30 cm (0.7 ft.
- 1.0 ft.), fill the viewfinder with a
patternless, solid-white object and
take a picture.
X The picture will be taken in aperture-
priority AE mode at an aperture of
f/22.
Since the image will not be saved, the
data can still be obtained even if there
is no card in the camera.
X
When the picture is taken, the camera will
start collecting the Dust Delete Data.
When the Dut Delete Data is obtained, a
message will ppear.
SeleK], ad the menu will reappear.
e data was not obtained
essfully, a message to that effect
will appear. Follow the “Preparation”
procedure on the preceding page, then
select [OK]. Take the picture again.
About the Dust Delete Data
After the Dust Delete Data is obtained, it is appended to all the JPEG
and RAW images captured thereafter. Before an important shoot, you
should update the Dust Delete Data by obtaining it again.
For details about using Digital Photo Professional (provided software,
in the Software Instruction Manual CD-ROM.
The Dust Delete Data appended to the image is so small that it hardly
affects the image file size.
Be sure to use a solid-white object such as a new sheet of white paper. If the
paper has any pattern or design, it may be recognized as dust data and
affect the accuracy of the dust deletion with the software.
Download from Www.Somanuals.com. All Manuals Search And Download.
172
3 Manual Sensor CleaningN
If dust adhere to the image sensor and dust spots appear on the
images, you can clean the image sensor yourself with a camera blower.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
Select [Clean manually].
1
Under the [6] tab, select [Clean
manually], then press <0>.
Select [O].
Sct [OK], then press <0>.
X In moment, the reflex mirror will
2
ckup and the shutter will open.
Clean the sensor.
3
End the cleaning.
4
Set the power switch to <2>.
For the power source, using AC Adapter Kit ACK-E10 (sold separately)
is recommended.
If you use a battery, make sure it is fully recharged.
Download from Www.Somanuals.com. All Manuals Search And Download.
173
3 Manual Sensor CleaningN
While cleaning the sensor, never do any of the following. If the
power is cut off, the shutter will close and the shutter curtains and
image sensor might get damaged.
• Setting the power switch to <2>.
• Opening the card/battery compartment cover.
The surface of the image sensor is extremely delicate. Clean the sensor
with care.
Use a plain blower without any brush attached. A brush can scratch the
sensor.
Do not insert the blower tip inside the camera beyond the lens mount. If
the power is turned off, the shutter will close and the shutter curtains or
reflex mirror might get damaged.
Never use canned air or gas to clean the sensor. The blowing force can
damage the sensor or the spray gas can freeze on the sensor.
If the battery level becomes low while you clean the sensor, the beeper
will sound as a warning. Stop cleaning the sesor.
If a smudge that cannot be removed h a bwer remains, having the
sensor cleaned by a Canon Service er is rcommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
174
Image Playback
This chapter explains features reted o viewing photos
and movies, going into more dethan in Chapter 2
“Basic Shooting and Imagyback.” Here you will
find explanations abut hoplayback and erase
photos and movies wth the camera and viewing them
on a TV set.
About images taken with another camera:
The camera might not be able to properly display images captured
with a different camera or edited with a computer or whose file name
was changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
175
x Searching for Images Quickly
H
Display Multiple Images on One Screen (Index display)
Search for images quickly with the index display showing four or nine
images on one screen.
Playback the image.
When you press the <x> button, the
1
last image captured will be displayed.
Switch to the index display.
2
Press the <I> button.
X The 4-image index display will
appear. The currently-selected image
will bhighlhted in a blue frame.
Prese <I> button again to
ch o the 9-image index display.
sing the <u> button will switch
the display between 9 images, 4
images and one image displayed.
Î
Î
Select an image.
Press the <S> key to move the blue
frame to select an image.
3
Turning the <6> dial will display the
next screen or previous image.
Press <0> and the selected image
will be displayed as a single image.
Download from Www.Somanuals.com. All Manuals Search And Download.
176
x Searching for Images Quickly
I Jump through Images (Jump display)
With the single image display, you can turn the <6> dial to jump
through the images forward or back according to the jump method that
was set.
Select [Image jump w/6].
1
Under the [4] tab, select [Image
jump w/6], then press <0>.
Select the jump method.
2
Press the <S> key to select the
jump method, then press <0>.
d: Display images one by one
e: Jum10 images
f: Jum100 images
gisplay by date
hDisplay by folder
i: Display movies only
j: Display stills only
Turn the <6> dial to select the
rating.
Browse by jumping.
3
Press the <x> button to playback
images.
On the single-image display, turn the
Jump method
<6> dial.
Playback position
To search images according to the shooting date, select [Date].
To search images according to folder, select [Folder].
If the card contains both [Movies] and [Stills], select either one to
display only movies or stills.
If no images match the selected [Rating], browsing through the images
with <6> is not possible.
Download from Www.Somanuals.com. All Manuals Search And Download.
177
u/y Magnified View
You can magnify a shot image by 1.5x to 10x on the LCD monitor.
Magnify the image.
During image playback, press the
1
<u> button.
X The image will be magnified.
If you hold down the <u> button, the
image will be magnified until it
reaches the maximum magnification.
Press the <I> button to reduce
the magnification. If you hold down
the button, the magnification will be
reduced to the single image display.
Magnified area position
Sll aound the image.
2
he <S> key to scroll around the
magnified image.
To exit the magnified display, press
the <x> button and the single image
display will return.
You can turn the <6> dial to view another image while the
magnification is maintained.
The image cannot be magnified during the image review immediately
after shooting.
A movie cannot be magnified.
Download from Www.Somanuals.com. All Manuals Search And Download.
178
b Rotating the Image
You can rotate the displayed image to the desired orientation.
Select [Rotate].
Under the [3] tab, select [Rotate],
1
then press <0>.
Select an image.
Press the <U> key to select the
2
image to be rotated.
You can also select an image on the
otathe image.
3
ach time you press <0>, the
image will rotate clockwise as follows:
90° → 270° → 0°
To rotate another image, repeat steps
2 and 3.
To exit and return to the menu, press
the <M> button.
vertical shots, you need not rotate the image as described above.
If the rotated image is not displayed in the rotated orientation during
image playback, set [5 Auto rotate] to [OnzD].
A movie cannot be rotated.
Download from Www.Somanuals.com. All Manuals Search And Download.
179
3 Setting Ratings
You can rate images and movies with one of five rating marks: l/m/
n/o/p.
Select [Rating].
Under the [4] tab, select [Rating],
1
then press <0>.
Select an image or movie.
2
Press the <U> key to select the
image or movie to be rated.
You can display three images by
pressing the <I> button. To
returthe single-image display,
ress e <u> button.
Rhe image or movie.
3
Press the <V> key to select a rating
mark.
X The total number of images and
movies rated will be counted for each
rating.
To rate another image or movie,
repeat steps 2 and 3.
To exit and return to the menu, press
the <M> button.
Download from Www.Somanuals.com. All Manuals Search And Download.
180
3 Setting Ratings
The number next to the rating marks (l/m/n/o/p) can only go up to
999. If there are 1,000 or more images for a rating, [###] will be displayed.
Taking advantage of ratings
With the [4 Image jump w/6] option, you can display only the rated
images and movies.
With the [4 Slide show] option, you can playback only the rated
images and movies.
select only the rated images and movies.
With Windows Vista and Windows 7, you can see the rating with the file
information display or the provided image viewer.
Download from Www.Somanuals.com. All Manuals Search And Download.
181
Q Quick Control During Playback
When you press the <Q> button during image playback, you can set
the following: [
Protect images, b Rotate, 9 Rating, e Image
jump w/6]. Note that movies cannot be rotated (b Rotate).
Press the <Q> button.
1
During image playback, press the
<Q> button.
X The functions settable with Quick
Control will appear on the left of the
screen.
Select a function and set it.
2
Press the <V> key to select a
function.
X The name ad current setting of the
selefuntion are displayed at the
tto
t by pressing the <U> key.
Exit the setting.
Press the <Q> button to turn off the
3
Quick Control icons and function
settings.
To rotate an image, set [5 Auto rotate] to [OnzD]. If [5 Auto rotate] is
set to [OnD] or [Off], the [b Rotate] setting will be recorded to the image,
but the camera will not rotate the image for display.
Download from Www.Somanuals.com. All Manuals Search And Download.
182
Q Quick Control During Playback
Pressing the <Q> button during the index display will switch to the
single-image display and the Quick Control icons will appear. Pressing
the <Q> button again will return to the index display.
For images taken with another camera, selectable functions may be
limited.
Download from Www.Somanuals.com. All Manuals Search And Download.
183
k Enjoying Movies
Basically, you can playback movies in the following three ways:
Playback on a TV set
An HDMI cable (sold separately) is
necessary to connect the camera to a
TV set. The TV set must also have an
HDMI terminal.
When the camera is connected to a TV
set with an HDMI cable, you can
playback movies and still photos on the
TV set. If you use a High-Definition TV
set to playback High-Definition (HD)
movies shot with this camera, you can
watch the moves in high definition.
The camera does not have an dio/eo OUT terminal. Therefore, the
camera cannot be connected V st with an analog AV cable.
Movies on a card can e playeby devices compatible with MOV
files.
Since hard disk recorders do not have an HDMI IN terminal, the camera
cannot be connected to a hard disk recorder with an HDMI cable.
Even if the camera is connected to a hard disk recorder with a USB
cable, movies and still photos cannot be played nor saved.
Using HDMI Cable HTC-100 (sold separately) is recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
184
k Enjoying Movies
Playback on the Camera’s LCD Monitor
You can playback movies on the
camera’s LCD monitor. You can also edit
out the movie’s first and last scenes, and
playback the images and movies in the
card in an automatic slide show.
A movie edited with a personal computer cannot be rewritten to the card and
played back with the camera.
Playback and Editing with a Personal Computer
he vie files recorded in the card can
ansferred to a personal computer
played or edited with ZoomBrowser
EX/ImageBrowser (provided software,
You can also extract a single frame from
a movie and save it as a still photo.
To have the movie playback smoothly on a personal computer, use a
high-performance personal computer. Regarding the computer hardware
requirements for ZoomBrowser EX/ImageBrowser, see the PDF file
instruction manual.
If you want to use commercially-available software to playback or edit the
movies, be sure it is compatible with MOV files. For details on
commercially-available software, inquire the software maker.
Download from Www.Somanuals.com. All Manuals Search And Download.
185
k Playing Movies
Playback the image.
Press the <x> button to display
1
images.
Select a movie.
Press the <U> key to select a
movie.
2
On the single-image display, the
<1s> icon displayed on the
upper left indicates a movie.
On the index display, the perforation
on the left ege of the image
indicaes a ovie. As movies
cannbe plyed on the index
pla, press <0> to switch to
ingle-image display.
On the single-image display,
3 press <0>.
X The movie playback panel will appear
on the bottom.
Playback the movie.
4
Select [7] (Play), then press <0>.
X The movie will start playing.
You can pause the movie playback by
pressing <0>.
During movie playback, you can turn
the <6> dial to adjust the built-in
speaker’s sound volume.
Speaker
For more details on the playback
procedure, see the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
186
k Playing Movies
Function
2 Exit
Playback Description
Returns to the single-image display.
7 Play
Pressing <0> toggles between play and stop.
Adjust the slow motion speed by pressing the <U>
key. The slow-motion speed is indicated on the upper
right.
8 Slow motion
5 First frame
Displays the movie’s first frame.
Each time you press <0>, a single previous frame
3 Previous frame is displayed. If you hold down <0>, it will rewind the
movie.
Each time you press <0>, the movie will play frame-
6 Next frame
by-frame. If you hold down <0>, it will fast forward
the movie.
4 Last frame
X Edit
Displays the ms lasframe.
Plyback on
mm’ ss”
Plabactime (minutes:seconds)
volume by turning the <6> dial.
9 Volume
With a fully-charged Battery Pack LP-E10, the continuous playback time
at 23°C/73°F will be as follows: Approx. 4 hr.
During the single-image display, you can press the <B> button to
adjust the sound volume with the TV set. (Turning the <6> dial will not
adjust the sound volume.)
This camera cannot playback Full High-Definition (Full HD) or High-
Definition (HD) movies (60/50 fps frame rate) taken with another EOS
camera. This camera can only playback High-Definition (HD) and
Standard-Definition (SD) movies having a 30/25 fps frame rate.
Download from Www.Somanuals.com. All Manuals Search And Download.
187
X
Editing a Movie’s First and Last Scenes
You can edit out the first and last scenes of a movie in 1-sec. increments.
On the movie playback screen,
select [X].
X The editing screen will be displayed.
1
Specify the part to be edited out.
2
Select either [U] (Cut beginning) or
[V] (Cut end), then press <0>.
Press the <U> key to see the
previous or next frames. Holding it
down will fast forward the frames.
After deciding which part to edit out,
press <0>. The portion highlighted
in blue on the top of the screen is
what will reain.
Check e edted movie.
3
lec7] and press <0> to playback
orton highlighted in blue.
Thange the editing, go back to step 2.
To cancel the editing, select [2] and
press <0>.
Save the movie.
4
Select [W], then press <0>.
X The save screen will appear.
To save it as a new movie, select
[New file]. To save it and overwrite
the original movie file, select
[Overwrite]. Then press <0>.
Since the editing is done in 1-sec. increments (position indicated by
[X]), the exact position where the movie is edited may differ slightly from
the position you specified.
If the card does not have enough room, [New file] will not be selectable.
More movie editing functions are available with ZoomBrowser EX/
ImageBrowser (provided software, p.270).
Download from Www.Somanuals.com. All Manuals Search And Download.
188
3 Slide Show (Auto Playback)
You can playback the images in the card as an automatic slide show.
Select [Slide show].
1
Under the [4] tab, select [Slide
show], then press <0>.
Select the images to be played.
Press the <V> key to select the
desired option, then press <0>.
Number of images to be played
2
[All images/Movies/Stills]
Press the <
following: [jAll images/kMovies/
zStills]. Then press < >.
V> key to select one of the
0
[Date/Folder/Rating]
Press th<V> key to select one of
thllowig: [iDate/nFolder/
Rang].
hen <zH> is highlighted,
press the <B> button.
Press the <V> key to select the
desired option, then press <0>.
Item
Playback Description
jAll images All the still photos and movies in the card will be played back.
Still photos and movies taken on the selected shooting date will
be played back.
iDate
nFolder
kMovies
zStills
Still photos and movies in the selected folder will be played back.
Only the movies in the card will be played back.
Only the still photos in the card will be played back.
Only the still photos and movies with the selected rating will be
played back.
9Rating
Download from Www.Somanuals.com. All Manuals Search And Download.
189
3 Slide Show (Auto Playback)
Set [Set up] as desired.
Press the <V> key to select [Set
up], then press <0>.
3
Set the [Display time] (still photos),
[Repeat], and [Transition effect].
Then press the <M> button.
[Display time]
[Repeat]
[Transition effect]
Start the slide show.
Prese <V> key to select [Start],
en ess <0>.
X [Loading image...] is displayed,
slide show will start.
4
5
Quit the slide show.
To quit the slide show and return to
the setting screen, press the
<M> button.
To pause the slide show, press <0>. During pause, [G] will be
displayed on the upper left of the image. Press <0> again to resume
the slide show.
During auto playback, you can press the <B> button to change the
still photo display format (p.70).
During movie playback, you can adjust the sound volume by turning the
<6> dial.
During pause, you can press the <U> key to view another image.
During the slide show, auto power off will not take effect.
The display time may vary depending on the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
190
Playback on a High-Definition TV
An HDMI cable (sold separately) is necessary to connect the
camera to a TV set. The TV set must also have an HDMI terminal.
When the camera is connected to a TV set with an HDMI cable, you can
playback movies and still photos on the TV set. If you use a High-
Definition TV set to playback High-Definition (HD) movies shot with this
camera, you can watch the movies in high definition.
Connect the HDMI cable to the
camera.
With the plug’s <dHDMI MINI> logo
facing the front of the camera, insert it
into the <D> terminal.
1
Connect te HDMI cable to the TV
2 set
Conect the HDMI cable to the TV’s
DMI IN port.
Turn on the TV and switch the
3 TV’s video input to select the
connected port.
Set the camera’s power switch to
4 <1>.
Adjust the movie’s sound volume with the TV set. The sound volume
cannot be adjusted with the camera.
Before connecting or disconnecting the cable between the camera and
television, turn off the camera and TV set.
Depending on the TV set, part of the image displayed might be cut off.
Download from Www.Somanuals.com. All Manuals Search And Download.
191
Playback on a High-Definition TV
Press the <x> button.
5
X The image will appear on the TV
screen (Nothing will be displayed on
the camera’s LCD monitor).
The images will automatically be
displayed at the TV’s optimum
resolution.
By pressing the <B> button, you
can change the display format.
Do not connect any other device’s output to the camera’s <D>
terminal. Doing so may cause a malfunction.
Certain TVs might not be able to playback thcaptured images.
Using HDMI CEC TV Sets
If the TV set connected to the cawith an HDMI cable is compatible
with HDMI CEC*, you can use the TV set’s remote control for playback
operations.
* An HDMI-standard function enabling HDMI devices to control each other so that
you can control them with one remote control unit.
Set [Ctrl over HDMI] to [Enable].
1
Under the [4] tab, select [Ctrl over
HDMI], then press <0>.
Select [Enable], then press <0>.
Connect the camera to a TV set.
2
Use an HDMI cable to connect the
camera to the TV.
X The TV’s input will switch
automatically to the HDMI port
connected to the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
192
Playback on a High-Definition TV
Press the camera’s <x> button.
3
X An image will appear on the TV
screen and you can use the TV’s
remote control to playback images.
Select an image or movie.
4
Point the remote control toward the
TV set and press the ꢀ/ꢁ button to
select an image.
Press the remote control’s Enter
Still photo playback menu
Movie playback menu
5 button.
X The menu appears and you can do
the playback operations shown on the
left.
Press thꢀ/ꢁ button to select the
ded opion, then press the Enter
buton. For a slide show, press the
mote control’s ꢂ/ꢃ button to select
an option, then press the Enter
button.
: Return
: 9-image index
: Play movie
: Slide show
: Disp. shooting ifo
: Rotate
If you select [Return] and press the
Enter button, the menu will disappear
and you can use the ꢀ/ꢁ button to
select an image.
Some TV sets require you to first enable the HDMI CEC connection. For
details, see the TV set’s instruction manual.
Certain TV sets, even those compatible with HDMI CEC, may not
operate properly. In such a case, disconnect the HDMI cable, set [4
Ctrl over HDMI] to [Disable], and use the camera to control the
playback operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
193
K Protecting Images
Protecting an image prevents it from being erased accidentally.
3 Protecting a Single Image
Select [Protect images].
1
Under the [3] tab, select [Protect
images], then press <0>.
X The protect setting screen will
appear.
Select [Select images].
2
Select [Select images], then press
<0>.
Image protect icon
Protect the image.
3
Press the <U> key to select the
image to be protected, then press
<0>.
X When an image is protected, the
<K> icon will appear on the top of
the screen.
To cancel the image protection, press
<0> again. The <K> icon will
disappear.
To protect another image, repeat step
3.
To exit the image protection, press
the <M> button. The menu will
reappear.
Download from Www.Somanuals.com. All Manuals Search And Download.
194
K Protecting Images
3 Protecting All Images in a Folder or Card
You can protect all the images in a folder or card at one time.
When you select [All images in folder]
or [All images on card] in [3 Protect
images], all the images in the folder or
card will be protected.
To cancel the image protection, select
[Unprotect all images in folder] or
[Unprotect all images on card].
Movies can also be protected.
Once an image is protected, it cannot be erased by the camera’s erase
function. To erase a protected image, you must first cancel the
protection.
remain. This is convenient when you want to erase unnecessary images
all at once.
Download from Www.Somanuals.com. All Manuals Search And Download.
195
L Erasing Images
You can either select and erase images one by one or erase them in
Once an image is erased, it cannot be recovered. Make sure
you no longer need the image before erasing it. To prevent
important images from being erased accidentally, protect
them. Erasing a 1+73 image will erase both the 1 and
73 images.
Erasing a Single Image
Playback the image to be erased.
1
Press the <L> button.
2
X The erase dalog will appear at the
bottom of thscreen.
Erase image.
ct Erase], then press <0>. The
3
e displayed will be erased.
3 Checkmarking <X> Images to be Erased in a Batch
By checkmarking the images to be erased, you can erase multiple
images at one time.
Select [Erase images].
1
Under the [3] tab, select [Erase
images], then press <0>.
Download from Www.Somanuals.com. All Manuals Search And Download.
196
L Erasing Images
Select [Select and erase images].
Select [Select and erase images],
then press <0>.
X The images will be displayed.
To display the three-image display,
press the <I> button. To return to
the single-image display, press the
<u> button.
2
3
4
Select the images to be erased.
Press the <U> key to select the
image to be erased, then press the
<V> key.
X A <X> checkmark will be displayed
on the uper left.
Tlect other images to be erased,
reat step 3.
se the images.
Press the <L> button.
Select [OK], then press <0>.
X The selected images will be erased.
3 Erasing All Images in a Folder or Card
You can erase all the images in a folder or card at one time. When [3
Erase images] is set to [All images in folder] or [All images on card],
all the images in the folder or card will be erased.
Download from Www.Somanuals.com. All Manuals Search And Download.
197
B Shooting Information Display
Sample Image Taken in a Creative Zone Mode
Protect
Exposure compensation amount
Rating
Flash exposure
compensation amount
Folder number - File number
Aperture
Histogram
(Brightness/RGB)
Shutter speed
Picture Style/Settings
Metering mode
Shooting mode
ISO speed
Highlight tone priority
White balance
Color space
Shooting date and
time
Image-recording
quality
hitbalance correction
Playback number/
Total images recorded
File size
Eye-Fi transmission
* With 1+73 images, the 1 file size is displayed.
* Photos taken with flash without any flash exposure compensation are marked
with the < > icon. Photos taken with flash exposure compensation are marked
with the <y> icon.
Download from Www.Somanuals.com. All Manuals Search And Download.
198
B Shooting Information Display
Sample Image Taken in a Basic Zone Mode
Shooting mode
Ambience and
ambience effects
Lighting or scene
* For images taken in Basic Zone modes, the information displayed may differ
depending on the shooting mode.
* Photos taken in the <C> mode will show [Background blur].
Sample Movie Taken in Movode
Shooting time
Movie/Playback
Movie shooting
mode
Movie file size
Recording
system
Movie recording size
Frame rate
* The shutter speed, aperture, and ISO speed will not be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
199
B Shooting Information Display
About the Highlight Alert
When the shooting information is displayed, any overexposed areas of the
image will blink. To obtain more image detail in the overexposed areas, set
the exposure compensation to a negative amount and shoot again.
About the Histogram
The brightness histogram shows the exposure level distribution and
overall brightness. The RGB histogram is for checking the color
saturation and gradation. The display can be switched with [4
Histogram].
[Brightness] Display
Sample Histograms
This histogram is a graph showing the distribution of
the image’s brightness level. The horizontal axis
indicates the brightness level (darker on the left and
brighter on the right), while the vertical axis indiates
how many pixels exist for each brightneslevelThe
more pixels there are toward the left, thker the
image. And the more pixels there wad the right,
the brighter the image. If tere arany pixels on
the left, the shadow detail will be lost. And if there are
too many pixels on the right, the highlight detail will be
lost. The gradation in-between will be reproduced. By
checking the image and its brightness histogram, you
Dark image
Normal brightness
Bright image
can see the exposure level inclination and the overall gradation.
[RGB] Display
This histogram is a graph showing the distribution of each primary color’s
brightness level in the image (RGB or red, green, and blue). The horizontal
axis indicates the color’s brightness level (darker on the left and brighter on
the right), while the vertical axis indicates how many pixels exist for each
color brightness level. The more pixels there are toward the left, the darker
and less prominent the color. And the more pixels there are toward the right,
the brighter and denser the color. If there are too many pixels on the left, the
respective color information will be lacking. And if there are too many pixels
on the right, the color will be too saturated with no detail. By checking the
image’s RGB histogram, you can see the color’s saturation and gradation
condition and white balance inclination.
Download from Www.Somanuals.com. All Manuals Search And Download.
200
Printing Images
You can connect the camirely to a printer and print
out the images in the cardcamera is compatible with
“wPictBridge” whih is the standard for direct printing.
DPOF (Digital Print Order Format) enables you to print
images recorded in the card according to your printing
instructions such as the image selection, quantity to print,
etc. You can print multiple images in one batch or give the
print order to a photofinisher.
Download from Www.Somanuals.com. All Manuals Search And Download.
201
Preparing to Print
The direct printing procedure is done entirely with the camera
while you look at the LCD monitor.
Connecting the Camera to a Printer
Set the camera’s power switch to
<2>.
1
Set up the printer.
2
For details, see the printer’s
instruction manual.
Connecting he camera to the
3 printe
e tinterface cable provided with
amera.
Cnnect the cable to the camera’s
<G> terminal with the cable plug’s
<G> icon facing the front of the
camera.
To connect to the printer, refer to the
printer’s instruction manual.
Turn on the printer.
4
Set the camera’s power switch to
5 <1>.
X Some printers may make a beeping
sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
202
Preparing to Print
Playback the image.
Press the <x> button.
X The image will appear, and the <w>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
wPictBridge
6
Movies cannot be printed.
The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.
Do not use any interface cable other than the one provided.
If there is a long beeping sound in step 5, it indicates a problem with the
printer. Resolve the problem displayed by the error message (p.210).
You can also print RAW images taken with this camera.
If you use a battery pack to power the camera, make sure it is fully
charged. With a fully-charged battery, printing up to about 4 hr. 30 min. is
possible.
Before disconnecting the cable, first turn off the camera and printer. Hold
the plug (not the cord) to pull out the cable.
For direct printing, using AC Adapter Kit ACK-E10 (sold separately) to
power the camera is recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
203
wPrinting
The screen display and setting options will differ depending on the
printer. Some settings might not be available. For details, see the
printer’s instruction manual.
Printer-connected icon
Select the image to be printed.
Check that the <w> icon is
1
displayed on the upper left of the LCD
monitor.
Press the <U> key to select the
image to be printed.
Press <
0>.
2
X The print setting screen will appear.
Print setting screen
Sets thte or ile number imprinting to on
or off.
e uantity to be printed.
Sets the paper size, type, and layout.
Returns to the screen in step 1.
Starts the printing.
The paper size, type, and layout you have set are displayed.
* Depending on the printer, certain settings such as the date and file
number imprinting and trimming might not be selectable.
Select [Paper settings].
3
Select [Paper settings], then press
<0>.
X The paper settings screen will
appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
204
wPrinting
Q Setting the Paper Size
Select the size of the paper loaded in
the printer, then press <0>.
X The paper type screen will appear.
Y Setting the Paper Type
Select the type of the paper loaded in
the printer, then press <0>.
When using a Canon printer and Canon
paper, read the printer’s instruction manual
to check what paper types can be used.
X The page layout screen will appear.
U Setting the Page Layout
Sect the page layout, then press
0>.
The print setting screen will reappear.
Bordered
The print will have white borders along the edges.
The print will have no borders. If your printer cannot print
borderless prints, the print will have borders.
Borderless
The shooting information* will be imprinted on the border on
9x13cm and larger prints.
Borderedc
xx-up
Option to print 2, 4, 8, 9, 16, or 20 images on one sheet.
*1
Twenty or 35 images will be printed as thumbnails on A4 or Letter size paper
.
20-upc
35-upp
• [20-upc] will have the shooting information*2 imprinted.
Default
The page layout will vary depending on the printer model or its settings.
print by following “Direct Printing with DPOF” (p.214).
*2: From the Exif data, the camera name, lens name, shooting mode, shutter speed,
aperture, exposure compensation amount, ISO speed, white balance, etc., will be
imprinted.
Download from Www.Somanuals.com. All Manuals Search And Download.
205
wPrinting
Set the printing effects.
4
Set as necessary. If you need not set
any printing effects, go to step 5.
What is displayed on the screen
differs depending on the printer.
Select the option on the upper right
(circled in the screenshot), then press
<0>.
Select the desired printing effect, then
press <0>.
If the <e> icon is displayed brightly
next to <z>, you can also adjust
the printing effect (p.208).
Printing Effect
Descron
The image will be printeordinto the printer’s standard
colors. The imagexif da is used to make automatic
corrections.
EOn
EOff
No automic correwill be applied.
The image ill bprinted with higher saturation to produce
more vivid blues and greens.
EVIVID
ENR
Image noise is reduced before printing.
Prints in black-and-white with true blacks.
0 B/W
0 Cool tone Prints in black-and-white with cool, bluish blacks.
0 Warm tone Prints in black-and-white with warm, yellowish blacks.
Prints the image in the actual colors and contrast. No
zNatural
automatic color adjustments are applied.
The printing characteristics are the same as the “Natural”
zNatural M
EDefault
setting. However, this setting enables finer printing
adjustments than with “Natural.”
The printing will differ depending on the printer. For details,
see the printer’s instruction manual.
* When you change the printing effects, it is reflected in the image displayed on
the upper left. Note that the printed image might look slightly different from the
displayed image which is only an approximation. This also applies to
[Brightness] and [Adjust levels] on page 208.
Download from Www.Somanuals.com. All Manuals Search And Download.
206
wPrinting
Set the date and file number
5 imprinting.
Set as necessary.
Select <I>, then press <0>.
Set as desired, then press <0>.
Set the number of copies.
Set as necessary.
Select <R>, then press <0>.
Set the number of copies, then press
<0>.
6
Start prinng.
St [Prnt], then press <0>.
7
With Easy printing, you can print another image using the same settings.
Just select the image and press the <l> button. With Easy printing, the
number of copies will always be 1. (You cannot set the number of
The [Default] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [Default] settings are.
Depending on the image’s file size and image-recording quality, it may
take some time for the printing to start after you select [Print].
print the image.
To stop the printing, press <0> while [Stop] is displayed, then select [OK].
revert to the default.
Download from Www.Somanuals.com. All Manuals Search And Download.
207
wPrinting
e Adjustment of Printing Effects
In step 4 on page 206, select the printing
effect. When the <e> icon is displayed
brightly next to <z>, you can press
the <B> button to adjust the printing
effect. What can be adjusted or what is
displayed will depend on the selection
made in step 4.
Brightness
The image brightness can be adjusted.
Adjust levels
When you select [Manual], you can change
the histogram’s distribution and adjust the
image’s brightness and contrast.
With the Adjust levels screen ayd, press
the <B> button to cange osition of
the <h>. Press the <U> key to freely adjust
the shadow level (0 - 127) or highlight level
(128 - 255).
kBrightener
Effective in backlit conditions which can make the subject’s face look
dark. When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective in flash images where the subject has red eye. When [On]
is set, the red eye will be corrected for printing.
The [kBrightener] and [Red-eye corr.] effects will not show on the screen.
When you select [Detail set.], you can adjust the [Contrast],
[Saturation], [Color tone], and [Color balance]. To adjust the [Color
balance], use the <S> keys. B is for blue, A is amber, M is magenta,
and G is green. The color in the respective direction will be corrected.
If you select [Clear all], all the printing effect settings will be reverted to
the default.
Download from Www.Somanuals.com. All Manuals Search And Download.
208
wPrinting
Trimming the Image
You can crop the image and print only
Tilt correction
the trimmed portion as if the image was
recomposed. Do the trimming right
before printing. If you set the trimming
and then set the print settings, you may
have to set the trimming again.
1 On the print setting screen, select [Trimming].
2 Set the trimming frame size, position, and aspect ratio.
The image area within the trimming frame will be printed. The
trimming frame’s aspect ratio ce chnged with [Paper settings].
Changing the trimming fe sze
When you press the <u<I> button, the size of the
trimming frame wl changThe smaller the trimming frame, the
larger the image magnication will be for printing.
Moving the trimming frame
Press the <S> key to move the frame over the image vertically or
horizontally. Move the trimming frame until it covers the desired image area.
Rotating the frame
Pressing the <B> button will toggle the trimming frame
between the vertical and horizontal orientations. This enables you
to create a vertical-oriented print from a horizontal image.
Image tilt correction
By turning the <6> dial, you can adjust the image tilt angle up to
±10 degrees in 0.5-degree increments. When you adjust the
image tilt, the <O> icon on the screen will turn blue.
3 Press <0> to exit the trimming.
X The print setting screen will reappear.
You can check the trimmed image area on the upper left of the
print setting screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
209
wPrinting
Depending on the printer, the trimmed image area might not be printed
as you specified.
The smaller you make the trimming frame, the grainier the picture will
look in the print.
While trimming the image, look at the camera’s LCD monitor. If you look
at the image on a TV screen, the trimming frame might not be displayed
accurately.
Handling Printer Errors
If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to
resume printing but it does not resume, operate the buttons on the printer to
resume printing. For details on resuming the printing, see the printer’s
instruction manual.
Error Messages
If a problem occurs during printing, an error mesage will appear on the
camera’s LCD monitor. Press <0> to sprintng. After fixing the
problem, resume printing. For details on to fix a printing problem, refer
to the printer’s instruction manua
Paper Error
Check whether the papeis poperly loaded in the printer.
Ink Error
Check the printer’s ink level, and check the waste ink tank.
Hardware Error
Check for any printer problems other than paper and ink problems.
File Error
The selected image cannot be printed via PictBridge. Images taken with a
different camera or images edited with a computer might not be printable.
Download from Www.Somanuals.com. All Manuals Search And Download.
210
W Digital Print Order Format (DPOF)
You can set the print type, date imprinting, and file No. imprinting. The
print settings will be applied to all print-ordered images. (They cannot
be set individually for each image.)
Setting the Printing Options
Select [Print order].
1
Under the [3] tab, select [Print
order], then press <0>.
Select [Set up].
Select [Set up], then press <0>.
2
Set the option as desired.
3
Set the [Print type], [Date], and [File
No.].
Select the option to be set, then press
<0>. Select the desired setting,
then press <0>.
[Print type]
[Date]
[File No.]
Download from Www.Somanuals.com. All Manuals Search And Download.
211
W Digital Print Order Format (DPOF)
Standard Prints one image on one sheet.
K
L
K
L
Index
Multiple thumbnail images are printed on one sheet.
Print type
Both
Prints both the standard and index prints.
On
Date
[On] imprints the recorded date on the print.
[On] imprints the file No. on the print.
Off
On
Off
File number
Exit the setting.
4
Press the <7> button.
X The print order screen will reappear.
Next, selec[Sel.Image], [Byn], or
[All image] o order the images to be
print
Even if [Date] and [File No.] re set to [On], the date or file No. might not
be imprinted depending on the print type setting and printer model.
When printing with DPOF, you must use the card whose print order
specifications have been set. It will not work if you just extract images
from the card and try to print them.
Certain DPOF-compatible printers and photofinishers might not be able
to print the images as you specified. If this happens with your printer,
refer to the printer’s instruction manual. Or check with your photofinisher
about compatibility when ordering prints.
Do not insert into the camera a card whose print order was set by a
different camera and then try to specify a print order. The print order may
not work or may be overwritten. Also, depending on the image type, the
print order may not be possible.
RAW images and movies cannot be print ordered. You can print RAW
images through direct printing (p.202).
With [Index] prints, both the [Date] and [File No.] cannot be set to [On]
at the same time.
Download from Www.Somanuals.com. All Manuals Search And Download.
212
W Digital Print Order Format (DPOF)
Print Ordering
Sel.Image
Select and order images one by one.
To display the three-image display, press
the <I> button. To return to the
single-image display, press the <u>
button.
After completing the print order, press
the <M> button to save the print
order to the card.
[Standard] [Both]
Press the <V> key to set the number of
copies to be printed for the displayed
image.
Quantity
Total images selected
[Inde
s the <V> key to checkmark the
<X> and the image will be included
in the index print.
Check mark
Index icon
Byn
Select [Mark all in folder] and select the folder. A print order for one
copy of all the images in the folder will be placed. If you select [Clear
all in folder] and select the folder, the print order for that folder will
all be canceled.
All image
If you select [Mark all on card], one copy of all the images in the
card will be set for printing. If you select [Clear all on card], the print
order will be cleared for all the images in the card.
Note that RAW images and movies will not be included in the print order
even if you set “Byn” or “All image.”
When using a PictBridge printer, print no more than 400 images for one
print order. If you specify more than this, all the images might not be
printed.
Download from Www.Somanuals.com. All Manuals Search And Download.
213
W Direct Printing with DPOF
With a PictBridge printer, you can easily
print images with DPOF.
1 Prepare to print.
procedure up to step 5.
2 Under the [3] tab, select [Print order].
3 Select [Print].
[Print] will be displayed only if the camra is connected to a
printer and printing is possible.
5 Select [OK].
Before printing, be sure to set the paper size.
Certain printers cannot imprint the file No.
If [Bordered] is set, certain printers might imprint the date on the border.
Depending on the printer, the date might look light if it is imprinted on a
bright background or on the border.
Under [Adjust levels], [Manual] cannot be selected.
If you stopped the printing and want to resume printing the remaining
images, select [Resume]. Note that printing will not resume if you stop
the printing and any of the following occurs:
• Before resuming the printing, you changed the print order or deleted
print-ordered images.
• When you set the index, you changed the paper setting before
resuming the printing.
• When you paused the printing, the card’s remaining capacity was low.
Download from Www.Somanuals.com. All Manuals Search And Download.
214
3 Setting Custom FunctionsN
Select [Custom Functions (C.Fn)].
Under the [7] tab, select [Custom
Functions (C.Fn)], then press <0>.
1
Custom Function No.
Select the Custom Function No.
2
Press the <U> key to select the
Custom Function No., then press
<0>.
Chnghe setting as desired.
3
s the <V> key to select the
sing (number), then press <0>.
Repeat steps 2 and 3 if you want to
set other Custom Functions.
At the bottom of the screen, the
current Custom Function settings are
indicated below the respective
function numbers.
Exit the setting.
Press the <M> button.
X The screen for step 1 will reappear.
4
Clearing All Custom Functions
Under [7 Clear settings], select [Clear all Custom Func. (C.Fn)] to
clear all the Custom Function settings (p.164).
Download from Www.Somanuals.com. All Manuals Search And Download.
216
3 Setting Custom FunctionsN
Custom Functions
C.Fn I: Exposure
A LV shooting
1
2
Exposure level increments
k
Flash sync. speed in Av mode
k
C.Fn II: Image
3
4
5
Long exposure noise reduction
k
k
k
High ISO speed noise reduction
Highlight tone priority
C.Fn III: Autofocus/Drive
AF-assist beam firing
6
k (With f*)
* If you use an EX-series Speedold eparately) equipped with a LED
light, the LED light will turn on assst even in the d and c
modes.
C.Fn IV: Operation/Others
7
8
9
Shutter/AE lock button
Assign SET button
k
k (Except 3)
k
Flash button function
10 LCD display when power ON
The shaded Custom Functions do not take effect during Live View (LV)
shooting. (Settings are disabled.)
Download from Www.Somanuals.com. All Manuals Search And Download.
217
3 Custom Function SettingsN
Custom Functions are organized into four groups based on the function
type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn
IV: Operation/Others.
C.Fn I: Exposure
C.Fn-1
Exposure level increments
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. Effective when
you prefer to control the exposure in less fine increments than 1/3-stop
increments.
With setting 1, the exposure level will be displayed in the viewfinder and on
the LCD monitor as shown below.
C.Fn-2
Flash sync. spn Av mode
When you use flash in the aerture-priority AE mode (f), you can set the
flash sync speed.
0: Auto
The flash sync speed is set automatically within a range of 1/200 sec. to
30 sec. to suit the scene’s brightness. With an external Speedlite, high-
speed sync will also be possible.
1: 1/200-1/60 sec. auto
Prevents a slow shutter speed from being set in low-light conditions. It is
effective for preventing subject blur and camera shake. However, while
the subject will be properly exposed with the flash, the background may
come out dark.
2: 1/200 sec. (fixed)
The flash-sync speed is fixed to 1/200 sec. This more effectively
prevents subject blur and camera shake than with setting 1. However,
the background may come out darker than with setting 1.
When 1 or 2 is set, high-speed sync cannot be used with an external
Speedlite.
Download from Www.Somanuals.com. All Manuals Search And Download.
218
3 Custom Function SettingsN
C.Fn II: Image
C.Fn-3
0: Off
1: Auto
For 1 sec. or longer exposures, noise reduction is performed
Long exposure noise reduction
automatically if noise typical of long exposures is detected. This [Auto]
setting is effective in most cases.
2: On
Noise reduction is performed for all exposures of 1 sec. or longer. The
[On] setting may be effective for noise that cannot be detected or
reduced with the [Auto] setting.
With settings 1 and 2, the continuous shooting speed will be slower even
with shutter speeds faster than 1 sec. (wih the image-recording quality
set to JPEG). The maximum burst during ontinuous shooting will also
decrease (with the image-recordualitset to JPEG). Settings 1 and
2 are recommended only wn sting long exposures.
With settings 1 and 2, afteictre is taken, the noise reduction
process may take te samunt of time as the exposure. You cannot
take another picturuntil he noise reduction process is completed.
At ISO 1600 and higher, noise might be more pronounced with setting 2
than with setting 0 or 1.
With setting 1 or 2, if a long exposure is shot with the Live View image
displayed, “BUSY” will be displayed during the noise reduction process.
The Live View display will not appear until the noise reduction is
completed. (You cannot take another picture.)
C.Fn-4
High ISO speed noise reduction
Reduces the noise generated in the image. Although noise reduction is
applied at all ISO speeds, it is particularly effective at high ISO speeds. At
low ISO speeds, the noise in the shadow areas is further reduced. Change
the setting to suit the noise level.
0: Standard
1: Low
2: Strong
3: Disable
Download from Www.Somanuals.com. All Manuals Search And Download.
219
3 Custom Function SettingsN
With setting 2, the continuous shooting speed will be slower (with the
image-recording quality set to JPEG or 1+73). The maximum burst
during continuous shooting will also decrease (with the image-recording
quality set to JPEG or 1).
If you playback a 1 or 1+73 image with the camera or print an
image directly, the effect of the high ISO speed noise reduction may look
minimal. You can check the noise reduction effect or print noise-reduced
images with Digital Photo Professional (provided software, p.270).
C.Fn-5
Highlight tone priority
0: Disable
1: Enable
Improves the highlight detail. The dynamic range is expanded from the
standard 18% gray to bright highlights. The gradation between the grays
and highlights becomes smoother.
[Disable] and the setting cane chnged.
With setting 1, noise may becghtly more pronounced than with
setting 0.
With setting 1, the settable range will be ISO 200 - 6400.
Also, the <A> icon will be displayed on the LCD monitor and in the
viewfinder when highlight tone priority is enabled.
C.Fn III: Autofocus/Drive
C.Fn-6
AF-assist beam firing
The AF-assist beam can be emitted by the camera’s built-in flash or by an
external, EOS-dedicated Speedlite.
0: Enable
If necessary, the AF-assist beam will be emitted by the built-in flash or
external Speedlite.
1: Disable
The AF-assist beam is not emitted.
Download from Www.Somanuals.com. All Manuals Search And Download.
220
3 Custom Function SettingsN
2: Enable external flash only
If an external Speedlite is attached, it will emit the AF-assist beam when
necessary. The camera’s built-in flash will not fire the AF-assist beam.
3: IR AF assist beam only
Among external Speedlites, only those which have an infrared AF-assist
beam will be able to emit the beam. This prevents any Speedlite which
uses a series of small flashes (like the built-in flash) from firing the AF-
assist beam.
With an EX-series Speedlite equipped with a LED light, the LED light will
not automatically turn on for AF-assist.
If the external Speedlite’s [AF-assist beam firing] Custom Function is set
to [Disabled], the Speedlite will not emit the AF-assist beam even if the
camera’s C.Fn-6 is set to 0, 2, or 3.
C.Fn IV: Operation/Others
C.Fn-7
Shutter/AE lock ton
0: AF/AE lock
1: AE lock/AF
Convenient when you wanto focus and meter separately. Press the
<A> button to autofocus, and press the shutter button halfway to apply
AE lock.
2: AF/AF lock, no AE lock
In the AI Servo AF mode, you can press the <A> button to stop the AF
operation momentarily. This prevents the AF from being thrown off by
any obstacle passing between the camera and subject. The exposure is
set at the moment the picture is taken.
3: AE/AF, no AE lock
This is useful for subjects which keep moving and stopping repeatedly.
In the AI Servo AF mode, you can press the <A> button to start or stop
the AI Servo AF operation. The exposure is set at the moment the
picture is taken. Thus, the optimum focusing and exposure will always
be achieved as you wait for the decisive moment.
Download from Www.Somanuals.com. All Manuals Search And Download.
221
3 Custom Function SettingsN
C.Fn-8
Assign SET button
You can assign a frequently-used function to <0>. Press <0> when the
camera is ready to shoot.
0: Normal (disabled)
1: Image quality
Press <0> to display the image-recording quality setting screen on the
LCD monitor.
Select the desired image-recording quality, then press <0>.
2: Flash exposure compensation
When you press <0>, the flash exposure compensation setting screen
will appear. Set the flash exposure compensation, then press <0>.
3: LCD monitor On/Off
Assigns the same function as the <B> button.
4: Menu display
Press <0> to display the menu screen.
5: Depth-of-field preview
The lens will stop down to the apertuat waset, and you can see
the depth of field (range of accle cus) in the viewfinder or in the
Live View image.
C.Fn-9
Flash buton unction
0: Raise built-in flash
1: ISO speed
The ISO speed setting screen will appear. Press the <U> key or turn
the <6> dial to change the ISO speed. You can also refer to the
viewfinder to set the ISO speed.
Download from Www.Somanuals.com. All Manuals Search And Download.
222
3 Custom Function SettingsN
C.Fn-10 LCD display when power ON
0: Display on
When the power switch is turned on, the shooting settings will be
1: Previous display status
If you pressed the <B> button and turned off the camera while the
LCD monitor was off, the shooting settings will not be displayed when
you turn on the camera again. This helps to save battery power. The
menu screens and image playback will still be displayed when used.
If you press the <B> button to display the shooting settings and then
turn off the camera, the shooting settings will be displayed when you
turn on the camera again.
Download from Www.Somanuals.com. All Manuals Search And Download.
223
3 Registering My MenuN
Under the My Menu tab, you can register up to six menu options and
Custom Functions whose settings you change frequently.
Select [My Menu settings].
1
Under the [9] tab, select [My Menu
settings], then press <0>.
Select [Register to My Menu].
2
Select [Register to My Menu], then
press <0>.
Register the desired items.
3
Select the item to be registered, then
press <0>
On the confmation dialog, select
[OK] press <0> to register the
.
can register up to six items.
To return to the screen in step 2,
press the <M> button.
About My Menu settings
Sort
You can change the order of the registered items in My Menu. Select [Sort]
and select the item whose order you want to change. Then press <0>. With
[z] displayed, press the <V> key to change the order, then press <0>.
Delete item/items and Delete all items
You can delete any of the registered items. [Delete item/items] deletes one
item at a time, and [Delete all items] deletes all items.
Display from My Menu
When [Enable] is set, the [9] tab will be displayed first when you display the
menu screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
224
External Speedlites
EOS-dedicated, EX-series Speedlites
Basically operates like a built-in flash for easy operation.
When an EX-series Speedlite (sold separately) is attached to the
camera, almost all the autoflash control is done by the camera. In other
words, it is like a high-output flash attached externally in place of the
built-in flash.
For detailed instructions, see the EX-series Speedlite’s instruction
manual. This camera is a Type-A camera that can use all the features
of EX-series Speedlites.
Shoe-mount Speedlites
Macro Lites
With an EX-series Speedlite not compatible with flash function settings
[External flash func. setting]. (Certain EX-series Speedlites also
enable [Shutter sync.] to be set.)
If flash exposure compensation is set with the external Speedlite, the
flash exposure compensation icon displayed on the camera’s LCD
monitor will change from y to 0.
If the Speedlite’s Custom Function has the flash metering mode set to
TTL autoflash, the flash will fire at full output only.
Download from Www.Somanuals.com. All Manuals Search And Download.
226
External Speedlites
Canon Speedlites other than the EX-series
With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL
autoflash mode, the flash can be fired at full output only.
Set the camera’s shooting mode to <a> (manual exposure) or
<f> (aperture-priority AE) and adjust the aperture setting before
shooting.
If you are using a Speedlite which has manual flash mode, shoot in
the manual flash mode.
Using Non-Canon Flash Units
Sync Speed
The camera can synchronize with compact, non-Canon flash units at
1/200 sec. or slower shutter speeds. Use sync speed slower than
1/200 sec.
Be sure to test the flash unit borehd to make sure it synchronizes
properly with the camera.
If the camera is used with a flash unit or flash accessory dedicated to
another camera brand, the camera may not operate properly and
malfunction may result.
Do not attach a high-voltage flash unit on the camera’s hot shoe. It might
not fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
227
Using a Household Power Outlet
With the AC Adapter Kit ACK-E10 (sold separately), you can connect
the camera to a household power outlet and not worry about the
remaining battery level.
Connect the power cord.
1
Connect the power cord as shown in
the illustration.
After using the camera, unplug the
power plug from the power outlet.
Connect the DC Coupler.
2
Connect the cord’s plug to the DC
Coupler.
Insert DC Coupler.
3
n he card/battery compartment
r and insert the DC Coupler until
it locks in place.
Push in the DC cord.
4
Open the DC cord hole cover and
install the cord as shown.
Close the card/battery compartment
cover.
Do not connect or disconnect the power cord while the camera’s power
switch is set to <1>.
Download from Www.Somanuals.com. All Manuals Search And Download.
228
F Using the Remote Switch
Remote Switch RS-60E3 (sold separately) comes with an approx.
60cm/2.0ft cord. When connected to the camera’s remote control
terminal, Remote Switch RS-60E3 can be used to press the shutter
button halfway and completely.
Remote Controller RC-6, RC-1, and RC-5 (all sold separately) cannot be
used with the camera.
Using the Eyepiece Cover
When you use the self-timer, bulb, emote Switch and do not look
through the viewfinder, stray ntring the viewfinder can cause the
attached to the camera strap.
During Live View shooting and movie shooting, attaching the
eyepiece cover is unnecessary.
Remove the eyecup.
1
Push the bottom of the eyecup to
remove.
Attach the eyepiece cover.
2
Slide the eyepiece cover down into
the eyepiece groove to attach it.
After taking the picture, detach the
eyepiece cover and attach the
eyecup by sliding it down the
eyepiece groove.
Download from Www.Somanuals.com. All Manuals Search And Download.
229
Using Eye-Fi Cards
With a commercially-available Eye-Fi card already set up, you can
automatically transfer captured images to a personal computer or
upload them to an online service via a wireless LAN.
The image transfer is a function of the Eye-Fi card. For instructions on
how to set up and use the Eye-Fi card or to troubleshoot any image
transfer problems, refer to the Eye-Fi card’s instruction manual or
inquire the card’s manufacturer.
The camera is not guaranteed to support Eye-Fi card functions
(including wireless transfer). In case of an issue with an Eye-Fi
card, please check with the card manufacturer. Also note that
approval is required to use Eye-Fi cards in many countries or
regions. Without approval, use of the card is not permitted. If it
is unclear whether the card has been approved for use in your
area, please check with the card manufacturer.
1
S[Eye-Fi settings].
2
er the [5] tab, select [Eye-Fi
settings], then press <0>.
This menu is displayed only when an
Eye-Fi card has been inserted into
the camera.
Enable the Eye-Fi transmission.
3
Press <0>, set [Eye-Fi trans.] to
[Enable], then press <0>.
If you set [Disable], automatic
transmission will not occur even with
the Eye-Fi card inserted
(Transmission status icon I).
Display the connection
4 information.
Select [Connection info.], then press
<0>.
Download from Www.Somanuals.com. All Manuals Search And Download.
230
Using Eye-Fi Cards
Check the [Access point SSID:].
5
Check that an access point is
displayed for [Access point SSID:].
You can also check the Eye-Fi card’s
MAC address and firmware version.
Press the <M> button three
times to exit the menu.
Take the picture.
6
X The picture is transferred and the
<H> icon switches from gray (Not
connected) to one of the icons below.
For transferred images, O is
displayed in the shooting information
Transmission status icon
H (Gray) Not connected : No nection with access point.
H (Blinking) Connecting necting with access point.
H (Displayed) Conected : nnection to access point established.
H ( ꢂ ) Transferring
: Image transfer to access point in
progress.
Cautions for Using Eye-Fi Cards
If “J” is displayed, an error occurred while retrieving the card
information. Turn the camera off and on again.
Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal. In
hospitals, airports, and other places where wireless transmissions are
prohibited, remove the Eye-Fi card from the camera.
If the image transfer does not function, check the Eye-Fi card and
personal computer settings. For details, see the card’s instruction
manual.
Depending on the wireless LAN’s connection conditions, the image
transfer may take longer or it might be interrupted.
Because of the transmission function, the Eye-Fi card may become hot.
The battery power will be consumed faster.
During the image transfer, auto power off will not take effect.
Download from Www.Somanuals.com. All Manuals Search And Download.
231
Function Availability Table According to Shooting Modes
o: Set automatically k: User selectable
: Not selectable
Basic Zone Creative Zone
k*1
Mode Dial
8
k
1 7 C
2
k
o
3
k
4
k
o
5
k
6
k
o
d
k
k
k
k
s f a
All recording quality
settings selectable
k
o
k
o
k
o
k
k
k
k
k
k
k
k
k
k
k
k
Auto / ISO Auto
o
o
o
k
ISO
Manual
k
speed
Settable maximum
k
ISO speed limit
Automatic setting
Manual selection
P P P Q R P P P
Picture
Style
k
k
k
k
k
k
Shoot by ambience selection
Shoot by lighting or scene type
Auto
k
o
k
k
o
k
k
o
k
k
o
k
k
o
k
o
o
o
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
Preset
White
balance
Custom
Correction /
Bracketing
Auto Lighting Optimizer
k
k
o
k
o
k
o
k
o
k
k
k
o
k
o
k
Lens peripheral illumination
correction
Long exposure noise
reduction
High ISO speed noise reduction
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Highlight tone priority
k
sRGB
Color
space
Adobe RGB
One-Shot AF
AI Servo AF
d
c
o
o
2
*
f
o
o
o
k
o
o
o
o
o
k
AI Focus AF
Focusing
o
o
k
o
k
o
o
k
o
o
k
f
AF point selection
AF-assist beam
Manual (MF)
3
*
k
k
k
Download from Www.Somanuals.com. All Manuals Search And Download.
232
Function Availability Table According to Shooting Modes
Basic Zone
Creative Zone
k*1
Mode Dial
8
k
1 7 C 2 3 4 5 6 d sf a
Evaluative
o
o
o
o
o
o
o
o
k
k
k
k
k
k
k
k
k
k
k
k
Metering
Metering mode
mode
k
selection
Program shift
Exposure
k
k
k
k
k
k
k
k
k
k
k
compensation
Exposure AEB
AE lock
k
Depth-of-field
k (C.Fn-8-5)
preview
Single shooting
Continuous shooting
j(10 sec.)
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
Drive
l(2 sec.)
q
(Continuous)
k
o
k
k
k
k
k
k
o
k
o
k
o
Fires automatically
Flash on
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
Built-in Flash off
o
o
o
flash
Red-eye reduction
k
k
k
k
FE lock
Flash exposure
compensation
Function setting
External
flash
Custom Function
setting
Live View shooting
Quick Control
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
Feature guide
*1: Still photos cannot be taken in the <k> movie shooting mode.
*2: If used during movie shooting, it will switch to <d>.
*3: If the AF mode is <f> during Live View shooting, the external Speedlite will
emit the AF-assist beam when necessary.
Download from Www.Somanuals.com. All Manuals Search And Download.
233
3 Menu Settings
For Viewfinder Shooting and Live View Shooting
1 Shooting 1 (Red)
Page
73 / 83 / 74 / 84 / 7a / 8a / b / c /
1+73 / 1
Quality
Beep
Enable / Disable
Release shutter
without card
Enable / Disable
Image review
Off / 2 sec. / 4 sec. / 8 sec. / Hold
Enable / Disable
Peripheral illumination
correction
Red-eye reduction
Disable / Enable
Flash firing / Built-in flash function setting /
External flash function setting / External flash
C.Fn setting / Clear externl flash C.Fn setting
Flash control
2 Shooting 2 (Red)
1/3-stop or p crements, ±5 stops
(AEB±2 st
Exposure
compensation/AEB
Auto Lighting
Optimizer
Disabe / Lw / Standard / Strong
Evaluative metering / Partial metering /
Center-weighted average metering
Metering mode
Custom White Balance Manual setting of white balance
WB correction: White balance correction
WB Shift/BKT
BKT setting: White balance bracketing
Color space
Picture Style
sRGB / Adobe RGB
PStandard / QPortrait / RLandscape /
SNeutral / UFaithful / VMonochrome /
WUser Def. 1, 2, 3
The [2] Shooting 2, [y] Shooting 3, [7] Set-up 3, and [9] My Menu
screens (tabs) are not displayed in Basic Zone modes.
The [z] Shooting 4 tab is displayed in Basic Zone modes as the [2]
Shooting 2 tab.
Shaded menu options are not displayed in Basic Zone modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
234
3 Menu Settings
y Shooting 3 (Red)
Page
Dust Delete Data
Obtains data to be used to erase dust spots
Max. 400 / Max. 800 / Max. 1600 / Max. 3200 /
Max. 6400
ISO Auto
z Shooting 4 (Red)
Live View shooting
AF mode
Enable / Disable
Live mode / u Live mode / Quick mode
Off / Grid 1l / Grid 2m
Grid display
4 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. /
30 min.
Metering timer
3 Playback 1 (Blue)
Select images / All images in folder / Unprotect
all images in folder / Al images on card /
Unprotect all images card
Protect images
Rotate
Rotate verticges
Select rasimages / All images in folder /
All imacard
Erase images
Print order
pecify images to be printed (DPOF)
4 Playback 2 (Blue)
Histogram
Brightness / RGB
1 image / 10 images / 100 images / Date /
Folder / Movies / Stills / Rating
Image jump w/6
Playback description / Display time / Repeat /
Transition effect
Slide show
Rating
[OFF] / l / m / n / o / p
Control over HDMI
Disable / Enable
Download from Www.Somanuals.com. All Manuals Search And Download.
235
3 Menu Settings
5 Set-up 1 (Yellow)
Page
30 sec. / 1 min. / 2 min. / 4 min. / 8 min. /
15 min. / Off
Auto power off
Auto rotate
Format
OnPD / OnD / Off
Initialize and erase data on the card
Continuous / Auto reset / Manual reset
Create and select a folder
File numbering
Select folder
Screen color
Select the shooting settings screen color
Eye-Fi transmission: Disable / Enable
Connection information
Eye-Fi settings*
* Displayed only when an Eye-Fi card is used.
6 Set-up 2 (Yellow)
LCD brightness
Seven brightness levels povided
LCD off/on button
Shutter btn. / Shutter/DI/ Remains on
Set the date (yeanth, day) and time (hour,
min., sec.)
Date/Time
Select the e language
Clen image sensor manually
Enable / Disable
LanguageK
Clean manually
Feature guide
7 Set-up 3 (Yellow)
Custom Functions
(C.Fn)
Customize camera functions as desired
Display copyright information / Enter author’s
Copyright information name / Enter copyright details / Delete
copyright information
Clear all camera settings / Clear all Custom
Func. (C.Fn)
Clear settings
-
Firmware Ver.
For updating the firmware
9 My Menu (Green)
Register frequently-used menu items and
Custom Functions
My Menu settings
Download from Www.Somanuals.com. All Manuals Search And Download.
236
3 Menu Settings
k For Movie Shooting
w Movie 1 (Red)
AF mode
Page
Live mode / u Live mode / Quick mode
Disable / Enable
AF with shutter button
during k
AF/AE lock / AE lock/AF /
AF/AF lock, no AE lock /
AE/AF, no AE lock
kShutter/AE lock
button
kHighlight tone
priority
Disable / Enable
x Movie 2 (Red)
Movie recording size
Sound recording
1280x720 6 / 1280720 5
On / Off
4 sec. se30 sec. / 1 min. / 10 min. /
30 mi
Metering timer
Grid display
Off / Gril / Grid 2m
y Movie 3 (Red)
Exposure
compensation
1/3-stop increments, ±3 stops
Auto Lighting
Optimizer
Disable / Low / Standard / Strong
Custom White Balance Manual setting of white balance
PStandard / QPortrait / RLandscape /
Picture Style
SNeutral / UFaithful / VMonochrome
WUser Def. 1, 2, 3
/
Download from Www.Somanuals.com. All Manuals Search And Download.
237
3 Menu Settings
1 Shooting 1 (Red)
Page
Beep
Enable / Disable
Enable / Disable
Peripheral illumination
correction
3 Playback 1 (Blue)
Select images / All images in folder / Unprotect
all images in folder / All images on card /
Unprotect all images on card
Protect images
Rotate
Rotate vertical images
Select and erase images / All images in folder
/ All images on card
Erase images
Print order
Specify images to be printed (DPOF)
4 Playback 2 (Blue)
Histogram
Brightness / RGB
1 image / ge/ 100 images / Date /
Foder / MoStills / Rating
Image jump w/6
Playack description / Display time / Repeat /
Transition effect
Slide show
Rating
[OFF] / l / m / n / o / p
Control over HDMI
Disable / Enable
Download from Www.Somanuals.com. All Manuals Search And Download.
238
3 Menu Settings
5 Set-up 1 (Yellow)
Page
30 sec. / 1 min. / 2 min. / 4 min. / 8 min. /
15 min. / Off
Auto power off
Auto rotate
Format
OnPD / OnD / Off
Initialize and erase data on the card
Continuous / Auto reset / Manual reset
Create and select a folder
File numbering
Select folder
Eye-Fi transmission: Disable / Enable
Connection information
Eye-Fi settings*
* Displayed only when an Eye-Fi card is used.
6 Set-up 2 (Yellow)
LCD brightness
Seven brightness levls provided
Set the date , moth, day) and time (hour,
min., se.)
Date/Time
LanguageK
Selecerface language
Enable / Disable
Feature guide
The menu tabs and options displayed will differ for viewfinder shooting,
Live View shooting, and movie shooting.
The [w] Movie 1, [x] Movie 2, and [y] Movie 3 screens (tabs) are
displayed only in the movie shooting mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
239
System Map
Macro Ring Lite Macro Twin Lite
ST-E2
270EX II
320EX
430EX II 580EX II
MR-14EX
MT-24EX
Bundled
Accessories
Eyepiece Extender
EP-EX15ll
Eyecup Ef
Rubber Frame Ef
Wide Strap
EW-200D
E-series Dioptric
Adjustment Lenses
Angle Finder C
Hand Strap E2
AC Adapter Kit
ACK-E10
Battery Pack
LP-E10
Battery Charger
LC-E10 or LC-E10E
DC Coupler
DR-E10
Compact Power
Adapter
CA-PS700
Semi Hard Case
EH19-L
Download from Www.Somanuals.com. All Manuals Search And Download.
240
System Map
Remote Switch
RS-60E3
EF lenses
EF-S lenses
HDMI Cable
HTC-100 (2.9 m/95 ft.)
TV/Video
Camera Instruction
Manual
EOS DIITAL
Solution Disk
SInstruction
Manual
PictBridge-compatible printer
Interface Cable
(1.3 m/4.3 ft.)
Interface Cable IFC-200U/500U
(1.9 m/6.2 ft.) / (4.7 m/15.4 ft.)
Computer
USB port
Windows 7
Windows Vista
Windows XP
Mac OS X
SD/SDHC/SDXC
memory card
Card slot
Card reader
* The length of all cables is approx. **m/**ft.
Download from Www.Somanuals.com. All Manuals Search And Download.
241
Troubleshooting Guide
If a problem occurs with the camera, first refer to this Troubleshooting
Guide. If this Troubleshooting Guide does not resolve the problem,
contact your dealer or nearest Canon Service Center.
Power-Related Problems
The battery pack does not recharge.
Do not recharge any battery pack other than a genuine Canon Battery
Pack LP-E10.
The battery charger’s lamp blinks.
If there is a problem with the battery charger, the protective circuit will stop
the charging operation and the charge lamp will blink in orange. If this
happens, disconnect the charger’s power plufrom the power outlet and
remove the battery pack. Attach the battery ck to the charger again and
wait a while before connecting the cr to a power outlet again.
The camera does not operate even the power switch is set to <
1>.
The access lamp still blinks even when the power switch is set to <
2>.
If the power is turned off while an image is being recorded to the card,
the access lamp will still continue to light/blink for a few seconds.
When the image recording is completed, the power will turn off
automatically.
The battery becomes exhausted quickly.
The rechargeable battery pack performance will degrade over
repeated use. Purchase a new one.
Download from Www.Somanuals.com. All Manuals Search And Download.
242
Troubleshooting Guide
If you use Live View shooting or shoot movies for a prolonged period
(p.121, 139), the number of possible shots will decrease.
If you hold down the shutter button for a long time or often use only the
AF without taking pictures, the number of possible shots will decrease.
If you often use the LCD monitor, the number of possible shots will
decrease.
If you use the lens Image Stabilizer, the number of possible shots will
decrease.
The camera turns off by itself.
Auto power off is in effect. If you do not want auto power off to take
Even if [5 Auto power off] has been set to [Off], the LCD monitor will
still turn off after the camera is idle for 30 min. Press the <B>
button to turn on the LCD monito
Shooting-Related Probs
No images can be shot nor recorded.
If the card is full, replace the card or delete unnecessary images to
If you try to focus in the One-Shot AF mode while the focus
confirmation light <o> in the viewfinder blinks, a picture cannot be
taken. Press the shutter button halfway again to focus, or focus
The card cannot be used.
Download from Www.Somanuals.com. All Manuals Search And Download.
243
Troubleshooting Guide
The file numbering does not start from 0001.
If the card already contains recorded images, the image number might
not start from 0001 (p.158).
The image is out of focus.
If the lens has an Image Stabilizer, set the IS switch to <1>.
In low light, the shutter speed may become slow. Use a faster shutter speed
Horizontal stripes appear, or the exposure or color tone look
strange.
Horizontal stripes or irregular exposs cabe caused by fluorescent
light, LED bulbs, or other artificial ling during viewfinder or Live
View shooting. Also, the expor color tone might not come out
right. A slow shutter seed mve the problem.
The continuous shooting speed is slower./
The maximum burst during continuous shooting is lower.
Under [7 Custom Functions (C.Fn)], if [3: Long exposure noise
reduction] is set to [0: Off] and [4: High ISO speed noise reduction]
to any setting other than [2: Strong], the continuous shooting speed
will return to normal. The maximum burst during continuous shooting
will also return to normal.
If you shoot something that has fine detail (field of grass, etc.), the file
size will be larger and the actual maximum burst might be lower than
the number mentioned on page 74.
ISO 100 cannot be set.
Under [7 Custom Functions (C.Fn)], if [5: Highlight tone priority]
is set to [1: Enable], ISO 100 cannot be set. If [0: Disable] is set, ISO
Download from Www.Somanuals.com. All Manuals Search And Download.
244
Troubleshooting Guide
The Auto Lighting Optimizer cannot be set.
Under the [7 Custom Functions (C.Fn)] menu, if [5: Highlight tone
priority] is set to [1: Enable], the Auto Lighting Optimizer cannot be
set. If [0: Disable] is set, the Auto Lighting Optimizer can be set
When I use the <
f> mode with flash, the shutter speed becomes slow.
If you shoot at night when the background is dark, the shutter speed
becomes slow automatically (slow-sync shooting) so that both the
subject and background are properly exposed. If you do not want a
slow shutter speed to be set, set [2: Flash sync. speed in Av mode]
The built-in flash pops up by itself.
In the 1, 2, 4, and 6 modee built-in flash will pop-up
automatically when flash esary.
The built-in flash does not fire.
If you shoot continuously with the built-in flash at short intervals, the
flash might stop operating to protect the flash unit.
I cannot set flash exposure compensation with [External
flash func. setting].
If flash exposure compensation has been set on an external Speedlite,
setting] screen. Also, if you set flash exposure compensation with the
camera and then set flash exposure compensation with the external
Speedlite, the Speedlite’s flash exposure compensation setting will
override the camera’s. When the Speedlite’s flash exposure
compensation is canceled, flash exposure compensation can be set
with the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
245
Troubleshooting Guide
High-speed sync cannot be set in the <f> mode.
Under [7 Custom Functions (C.Fn)], set [2: Flash sync. speed in
The camera makes a noise when it is shaken.
The built-in flash’s pop-up mechanism moves slightly. This is normal.
The shutter makes two shooting sounds during Live View shooting.
If you use flash, the shutter will make two sounds each time you shoot
During Live View shooting and movie shooting, the
E
icon appears.
It indicates that the camera’s internal temprature is high. If the <s>
icon is white, the still photo’s imaglity might deteriorate. If the
<E> icon is red, it indicates the ive View or movie shooting will
Movie shooting terminates by itself.
If the card’s writing speed is slow, movie shooting may stop
automatically. Use an SD Speed Class 6 “
” or faster card. To
find out the card’s read/write speed, see the card manufacturer’s Web
site, etc.
If a movie clip’s file size reaches 4 GB or the shooting length reaches
29 min. 59 sec., the movie shooting will stop automatically.
The image flickers or horizontal stripes appear during movie
shooting.
Flickering, horizontal stripes (noise), or irregular exposures can be
caused by fluorescent light, LED bulbs, or other artificial lighting during
movie shooting. Also, changes in the exposure (brightness) or color
tone might also be recorded.
Download from Www.Somanuals.com. All Manuals Search And Download.
246
Troubleshooting Guide
Playback Problems
The LCD monitor does not display a clear image.
If the LCD monitor is dirty, use a soft cloth to clean it.
In low or high temperatures, the LCD monitor display may seem slow
or might look black. It will return to normal at room temperature.
Part of the image blinks in black.
of highlight detail will blink.
The image cannot be erased.
The movie cannot play.
Movies edited with a persomputer using the provided
ZoomBrowser EX/ImageBrowser (p.270) or other software cannot be
played with the camera.
When the movie is played, camera operation noise can be heard.
If you operate the camera’s dials or lens during movie shooting, the
operation noise will also be recorded.
The movie has still moments.
If there is a drastic change in the exposure during movie shooting, the
autoexposure stops the recording momentarily until the exposure
stabilizes.
The subject looks distorted during movie shooting.
If you move the camera to the left or right quickly (high-speed panning)
or shoot a moving subject, the image may look distorted.
Download from Www.Somanuals.com. All Manuals Search And Download.
247
Troubleshooting Guide
I cannot connect the camera to my TV set.
An HDMI cable (sold separately) is necessary to connect the camera
to a TV set. Using the HDMI Cable HTC-100 (sold separately) is
Also check that your TV set has an HDMI IN terminal. If the TV set
does not have an HDMI IN terminal and has only an A/V IN jack, the
camera cannot be connected.
No image appears on the TV screen.
Using HDMI Cable HTC-100 (sold separately) is recommended
My card reader does not recognize the ard.
Depending on the card readend mputer OS used, SDXC cards
might not be correctly recogIn uch a case, connect your
camera to the computr with trovided interface cable, then
transfer the images to our omputer using EOS Utility (provided
software, p.270).
Display Problems
The menu screen shows few tabs and options.
In Basic Zone modes and in movie shooting mode, certain tabs and
menu options are not displayed. Set the shooting mode to a Creative
The file name’s first character is an underscore (“_MG_”).
Set the color space to sRGB. If Adobe RGB is set, the first character
Download from Www.Somanuals.com. All Manuals Search And Download.
248
Troubleshooting Guide
The file name starts with “MVI_”.
The shooting date and time displayed is incorrect.
The date and time is not in the picture.
The shooting date and time does not appear in the picture. The date
and time is instead recorded in the image data as shooting
information. When printing, you can imprint the date and time in the
picture by using the date and time recorded in the shooting information
[###] is displayed.
If the card has recorded mbof images greater than the camera
[Eye-Fi settings] does nt appear.
[Eye-Fi settings] will appear only when an Eye-Fi card is inserted into
the camera. If the Eye-Fi card has a write-protect tab set to the LOCK
position, you will not be able to check the card’s connection status or
Printing-Related Problems
There are fewer printing effects than listed in the instruction
manual.
What is displayed on the screen differs depending on the printer. This
instruction manual lists all the printing effects available (p.206).
Download from Www.Somanuals.com. All Manuals Search And Download.
249
Error Codes
If there is a problem with the camera, an
error message will appear. Follow the on-
screen instructions.
Error No.
Countermeasures
No.
Error Message & Solution
Communications between the camera and lens is faulty. Clean the
lens contacts.
01
Î Clean the electrical contacts on the caera and lens and use a
Canon lens (p.15, 18).
Card cannot be accessedinst/change card or format card
with camera.
02
Î Remove and insrt the cargain, replace the card, or format the
Cannot save images because card is full. Replace card.
04
05
Î Replace the card, erase unnecessary images, or format the card
The built-in flash could not be raised. Turn the camera off and on
again.
Shooting is not possible due to an error. Turn the camera off and
on again or re-install the battery.
10, 20,
30, 40,
50, 60,
70, 80
Î Operate the power switch, remove and install the battery pack
again, or use a Canon lens (p.31, 28).
* If the error still persists, write down the error No. and contact your nearest
Canon Service Center.
Download from Www.Somanuals.com. All Manuals Search And Download.
250
Specifications
• Type
Type:
Digital, single-lens reflex, AF/AE camera with built-in flash
Recording media:
SD memory card, SDHC memory card, SDXC memory
card
Image sensor size:
Compatible lenses:
Approx. 22.0 x 14.7mm
Canon EF lenses (including EF-S lenses)
(35mm-equivalent focal length is approx. 1.6 times the
lens focal length)
Lens mount:
Canon EF mount
• Image Sensor
Type:
CMOS sensor
Effective pixels:
Aspect ratio:
Approx. 12.20 megapixels
3:2
Dust delete function:
Manual, Dust Delete Data appended
• Recording system
Recording format:
Image type:
Design rule for Camea ile System 2.0
JPEG, RAW (1Cann original)
RAW+JPELasimultaneous recording possible
Recorded pixels:
L (Large
ppox. 12.20 megapixels (4272 x 2848)
M (Mediupprox. 6.30 megapixels (3088 x 2056)
S(Small 1) : Approx. 3.40 megapixels (2256 x 1504)
S2 (Small 2) : Approx. 2.50 megapixels (1920 x 1280)
S3 (Small 3) : Approx. 350,000 pixels (720 x 480)
RAW
: Approx. 12.20 megapixels (4272 x 2848)
Create/select a folder: Possible
• Image Processing
Picture Style:
Standard, Portrait, Landscape, Neutral, Faithful,
Monochrome, User Def. 1 - 3
Basic+:
Shoot by ambience selection, Shoot by lighting or scene
type
White balance:
Auto, Preset (Daylight, Shade, Cloudy, Tungsten light,
White fluorescent light, Flash), Custom
White balance correction and white balance bracketing
features provided
* Flash color temperature information communication
provided
Noise reduction:
Applicable to long exposures and high ISO speed shots
Download from Www.Somanuals.com. All Manuals Search And Download.
251
Specifications
Automatic image
brightness correction: Auto Lighting Optimizer
Highlight tone priority: Provided
Lens peripheral
illumination correction: Provided
• Viewfinder
Type:
Eye-level pentamirror
Coverage:
Magnification:
Eye point:
Built-in dioptric adjustment
Focusing screen:
Mirror:
Vertical/Horizontal approx. 95% (with Eye point approx. 21 mm)
Approx. 0.8x (-1 m-1 with 50mm lens at infinity)
Approx. 21 mm (From eyepiece lens center at -1 m-1
Approx. -2.5 - +0.5 m-1 (dpt)
Fixed, Precision Matte
)
:
Quick-return type
Depth-of-field preview: Enabled with Custom Function setting
• Autofocus
Type:
TTL secondary image-regisration, phase detection
AF points:
9 AF points
Metering range:
Focus modes:
AF-assist beam:
EV 0 - 18 (at 23°C/, ISO 100)
One-Shot AFvo F, AI Focus AF, Manual focusing (MF)
Smalseries hes fired by built-in flash
• Exposure Control
Metering modes:
63-zone TTL full-aperture metering
• Evaluative metering (linked to all AF points)
• Partial metering (approx. 10% of viewfinder at center)
• Center-weighted average metering
Metering range:
EV 1 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens,
ISO 100)
Exposure control:
Program AE (Full Auto, Flash Off, Creative Auto, Portrait,
Landscape, Close-up, Sports, Night Portrait, Program),
shutter-priority AE, aperture-priority AE, manual
exposure, automatic depth-of-field AE
ISO speed:
(Recommended
exposure index)
Basic Zone modes: ISO 100 - 3200 set automatically
Creative Zone modes: Set manually within ISO 100 - 6400
(whole-stop increments), set automatically within ISO
100 - 6400, maximum ISO speed settable with ISO Auto
Exposure compensation: Manual: ±5 stops in 1/3- or 1/2-stop increments
AEB:±2 stops in 1/3- or 1/2-stop increments (Can be
combined with manual exposure compensation)
Download from Www.Somanuals.com. All Manuals Search And Download.
252
Specifications
AE lock:
Auto:Applied in One-Shot AF mode with evaluative
metering when focus is achieved
Manual: By AE lock button
• Shutter
Type:
Shutter speeds:
Electronically-controlled, focal-plane shutter
1/4000 sec. to 1/60 sec. (Full Auto mode),
X-sync at 1/200 sec.
1/4000 sec. to 30 sec., bulb (Total shutter speed range.
Available range varies by shooting mode.)
• Flash
Built-in flash:
Retractable, auto pop-up flash
Guide No. approx. 9.2/30 (at ISO 100 in meters/feet) or
approx. 13/43 (at ISO 200 in meters/feet)
Flash coverage: Approx. 17mm lens angle of view
Recycling time approx. 2 sec.
External flash:
Flash metering:
Flash exposure
compensation:
FE lock:
EX-series Speedlite (Flsunctions settable with the camera)
E-TTL II autofla
±2 stops - o1/2-stop increments
Povided
Nne
PC terminal:
• Drive System
Drive mode:
Single shooting, continuous shooting, self-timer with 10-sec. or
2-sec. delay and 10-sec. delay with continuous shooting
Continuous shooting speed: JPEG: Max. approx. 3.0 fps
RAW: Max. approx. 2.0 fps
RAW+JPEG Large/Fine: Approx. 0.8 fps (averaged value)
* With RAW+JPEG Large/Fine, the continuous shooting
speed will be slower after the third shot.
* Based on Canon’s standard 4GB card
JPEG Large/Fine: Approx. 830 shots
RAW: Approx. 5 shots
Max. burst:
RAW+JPEG Large/Fine: Approx. 1 shot
* With RAW+JPEG Large/Fine, “busy” will be displayed.
Continuous shooting at approx. 0.8 fps (averaged
value) is possible.
*
Based on Canon’s standard 4GB card and Canon’s testing
conditions (with ISO 100 and Standard Picture Style).
Download from Www.Somanuals.com. All Manuals Search And Download.
253
Specifications
• Live View Shooting
Focusing:
Live mode, Face detection Live mode (Contrast detection)
Quick mode (Phase-difference detection), Manual focusing
(Approx. 5x / 10x magnification possible)
Evaluative metering with the image sensor
EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens,
ISO 100)
Metering modes:
Metering range:
Grid display:
Two types
• Movie Shooting
Movie compression:
MPEG-4 AVC/H.264
Variable (average) bit rate
Audio recording format: Linear PCM
Recording format:
Recording size:
Frame rate:
MOV
1280x720 (HD)
30p (29.97 fps), 25p (25.00 fps)
Approx. 222.6 MB/min.
File size:
Focusing:
Metering modes:
Same as focusing wLive View shooting
Center-weighted ae and evaluative metering with
the image s
* Automaticby the focusing mode
EV 0 20 (at 2C/73°F with EF50mm f/1.4 USM lens,
ISO 100)
Metering range:
Exposure control:
ISO speed:
Program AE for movie shooting
Automatically set within ISO 100 - 6400
Exposure compensation: ±3 stops in 1/3-stop increments
AE lock:
Provided
Sound recording:
Grid display:
Movie editing:
Built-in monaural microphone
Two types
Editing out first and last scenes possible (1-sec.
increments)
• LCD Monitor
Type:
TFT color, liquid-crystal monitor
Monitor size and dots: 2.7-in. with approx. 230,000 dots
Brightness adjustment: Manual (7 levels)
Interface languages:
Feature guide:
25
Displayable
Download from Www.Somanuals.com. All Manuals Search And Download.
254
Specifications
• Playback
Image display formats: Basic info, basic info + image quality/playback number,
shooting info. display, histogram, 4-image index, 9-image
index, image rotate possible
Zoom magnification:
Approx. 1.5x - 10x
Image browsing methods: Single image, jump by 10 or 100 images, by shooting
date, by folder, by movies, by stills, by rating
Highlight alert:
Movie playback:
Overexposed highlights blink
Enabled (LCD monitor, HDMI OUT)
Built-in speaker
• Direct Printing
Compatible printers:
Printable images:
Print ordering:
PictBridge-compatible printers
JPEG and RAW images
DPOF Version 1.1 compatible
• Custom Functions
Custom Functions:
10
My Menu registration: Possible
Copyright information: Entry and incluspossible
• Interface
Digital terminal:
Fr persomputer communication and direct printing
(HSped USB equivalent)
HDMI mini OUT terminal: Type C (Auto switching of resolution), CEC-compatible
Remote control terminal: For Remote Switch RS-60E3
Eye-Fi card:
Compatible
• Power
Battery:
Battery Pack LP-E10 (Quantity 1)
* AC power can be supplied via AC Adapter Kit ACK-E10
With viewfinder shooting:
Battery life:
(Based on CIPA
testing standards)
Approx. 700 shots at 23°C/73°F, approx. 650 shots at 0°C/32°F
With Live View shooting:
Approx. 220 shots at 23°C/73°F, approx. 210 shots at 0°C/32°F
Total approx. 1 hr. 50 min. at 23°C/73°F
Total approx. 1 hr. 30 min. at 0°C/32°F
(With a fully-charged Battery Pack LP-E10)
Movie shooting time:
• Dimensions and Weight
Dimensions (W x H x D): Approx. 129.9 x 99.7 x 77.9 mm / 5.1 x 3.9 x 3.1 in.
Weight:
Approx. 495 g / 17.5 oz. (CIPA Guidelines),
Approx. 450 g / 15.9 oz. (Body only)
Download from Www.Somanuals.com. All Manuals Search And Download.
255
Specifications
• Operation Environment
Working temperature range: 0°C - 40°C / 32°F - 104°F
Working humidity:
85% or less
• Battery Pack LP-E10
Type:
Rechargeable lithium-ion battery
Rated voltage:
Battery capacity:
7.4 V DC
860 mAh
Working temperature range: During charging: 6°C - 40°C / 43°F - 104°F
During shooting: 0°C - 40°C / 32°F - 104°F
Working humidity:
Dimensions (W x H x D): Approx. 36.2 x 14.7 x 49.0 mm / 1.4 x 0.6 x 1.9 in.
Weight: Approx. 45 g / 1.6 oz.
85% or less
• Battery Charger LC-E10
Compatible battery:
Recharging time:
Rated input:
Battery Pack LP-E10
Approx. 2 hours (at 23°C / 3°F)
100 - 240 V AC (50/60 H)
8.3 V DC / 580 mA
Rated output:
Working temperature range: 6°C - 40°C / F - °F
Working humidity: 85% or less
Dimensions (W x H x D): Apprx. 67.0 x 87.5 mm / 2.6 x 1.2 x 3.4 in.
Weight: Approx. 85 g / 3.0 oz.
• Battery Charger LC-E10E
Compatible battery:
Power cord length:
Recharging time:
Rated input:
Battery Pack LP-E10
Approx. 1 m / 3.3 ft.
Approx. 2 hours (at 23°C / 73°F)
100 - 240 V AC (50/60 Hz)
8.3 V DC / 580 mA
Rated output:
Working temperature range: 6°C - 40°C / 43°F - 104°F
Working humidity: 85% or less
Dimensions (W x H x D): Approx. 67.0 x 30.5 x 87.5 mm / 2.6 x 1.2 x 3.4 in.
Weight: Approx. 82 g / 2.9 oz. (excluding power cord)
• EF-S18-55mm f/3.5-5.6 IS II
Angle of view:
Diagonal extent: 74°20’ - 27°50’
Horizontal extent: 64°30’ - 23°20’
Vertical extent: 45°30’ - 15°40’
11 elements in 9 groups
f/22 - 36
Lens construction:
Minimum aperture:
Closest focusing distance: 0.25 m / 0.82 ft. (From image sensor plane)
Download from Www.Somanuals.com. All Manuals Search And Download.
256
Specifications
Max. magnification:
Field of view:
0.34x (at 55 mm)
207 x 134 - 67 x 45 mm / 8.1 x 5.3 - 2.6 x 1.8 in. (at 0.25
m / 0.82 ft.)
Lens shift type
58 mm
Image Stabilizer:
Filter size:
Lens cap:
E-58
Max. diameter x length: Approx. 68.5 x 70.0 mm / 2.7 x 2.8 in.
Weight:
Hood:
Case:
Approx. 200 g / 7.1 oz.
EW-60C (sold separately)
LP814 (sold separately)
• EF-S18-55mm f/3.5-5.6 III
Angle of view:
Diagonal extent: 74°20’ - 27°50’
Horizontal extent: 64°30’ - 23°20’
Vertical extent: 45°30’ - 15°40’
11 elements in 9 groups
f/22 - 36
Lens construction:
Minimum aperture:
Closest focusing distance: 0.25 m / 0.82 ft. (From age sensor plane)
Max. magnification:
Field of view:
0.34x (at 55m
207 x 137 x 5 mm / 8.1 x 5.3 - 2.6 x 1.8 in. (at
0.25 m / )
5mm
E-8
Filter size:
Lens cap:
Max. diameter x length: Approx. 68.5 x 70.0 mm / 2.7 x 2.8 in.
Weight:
Hood:
Case:
Approx. 195 g / 6.9 oz.
EW-60C (sold separately)
LP814 (sold separately)
All the data above is based on Canon’s testing standards and CIPA (Camera &
Imaging Products Association) testing standards and guidelines.
Dimensions, maximum diameter, length and weight listed above are based on
CIPA Guidelines (except weight for camera body only).
Product specifications and the exterior are subject to change without notice.
If a problem occurs with a non-Canon lens attached to the camera, consult the
respective lens maker.
Download from Www.Somanuals.com. All Manuals Search And Download.
257
Trademarks
Adobe is a trademark of Adobe Systems Incorporated.
Windows is a trademark or registered trademark of Microsoft Corporation in the
United States and other countries.
Macintosh and Mac OS are trademarks or registered trademarks of Apple Inc.
in the United States and other countries.
SDXC logo is a trademark of SD-3C, LLC.
HDMI, HDMI logo, and High-Definition Multimedia Interface are a trademark or
registered trademark of HDMI Licensing LLC.
All other corporate and product names and trademarks mentioned in this
manual are the property of their respective owners.
About MPEG-4 Licensing
“This product is licensed under AT&T patents for the MPEG-4 standard and may be
used for encoding MPEG-4 compliant video anor deding MPEG-4 compliant video
that was encoded only (1) for a personal and commrcial purpose or (2) by a
video provider licensed under the AT&ento provide MPEG-4 compliant video.
No license is granted or implied for anuse for MPEG-4 standard.”
* Notice displayed in English arequire
Use of genuine Canon accessories is recommended
This product is designed to achieve excellent performance when used with
genuine Canon accessories. Canon shall not be liable for any damage to this
product and/or accidents such as fire, etc., caused by the malfunction of non-
genuine Canon accessories (e.g., a leakage and/or explosion of a battery
pack). Please note that this warranty does not apply to repairs arising out of the
malfunction of non-genuine Canon accessories, although you may request
such repairs on a chargeable basis.
Download from Www.Somanuals.com. All Manuals Search And Download.
258
Safety Warnings
Follow these safeguards and use the equipment properly to prevent injury, death,
and material damage.
Preventing Serious Injury or Death
• To prevent fire, excessive heat, chemical leakage, and explosions, follow the
safeguards below:
- Do not use any batteries, power sources, and accessories not specified in this
booklet. Do not use any home-made or modified batteries.
- Do not short-circuit, disassemble, or modify the battery pack or back-up battery. Do
not apply heat or apply solder to the battery pack or back-up battery. Do not expose
the battery pack or back-up battery to fire or water. And do not subject the battery
pack or back-up battery to strong physical shock.
- Do not install the battery pack or back-up battery in reversed polarity (+ –). Do not
mix new and old or different types of batteries.
- Do not recharge the battery pack outside the allowable ambient temperature range
of 0°C - 40°C (32°F - 104°F). Also, do not exceed the recharging time.
- Do not insert any foreign metallic objects into the electrical contacts of the camera,
accessories, connecting cables, etc.
• Keep the back-up battery away from children. If ild swallows the battery, consult a
physician immediately. (Battery chemicaharthe stomach and intestines.)
• When disposing of a battery pack ack-battery, insulate the electrical contacts
with tape to prevent contact with etaic objects or batteries. This is to prevent
fire or an explosion.
• If excessive heat, smoke, r fumes are emitted during battery pack recharging,
immediately unplug the battry carger from the power outlet to stop the recharging
and prevent a fire.
• If the battery pack or back-up battery leaks, changes color, deforms, or emits smoke or
fumes, remove it immediately. Be careful not to get burned in the process.
• Prevent any battery leakage from contacting your eyes, skin, and clothing. It can
cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or
clothing, flush the affected area with lots of clean water without rubbing it. See a
physician immediately.
• During the recharging, keep the equipment away from the reach of children. The cord
can accidentally choke the child or give an electrical shock.
• Do not leave any cords near a heat source. It can deform the cord or melt the
insulation and cause a fire or electrical shock.
• Do not fire the flash at someone driving a car. It may cause an accident.
• Do not fire the flash near a person’s eyes. It may impair the person’s vision. When
using flash to photograph an infant, keep at least 1 meter away.
• Before storing the camera or accessory when not in use, remove the battery pack and
disconnect the power plug. This is to prevent electrical shock, heat generation, and
fire.
• Do not use the equipment where there is flammable gas. This is to prevent an
explosion or fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
259
• If you drop the equipment and the casing breaks open to expose the internal parts, do
not touch the internal parts due to the possibility of electrical shock.
• Do not disassemble or modify the equipment. High-voltage internal parts can cause
electrical shock.
• Do not look at the sun or an extremely bright light source through the camera or lens.
Doing so may damage your vision.
• Keep the camera from the reach of small children. The neck strap can accidentally
choke the child.
• Do not store the equipment in dusty or humid places. This is to prevent fire and
electrical shock.
• Before using the camera inside an airplane or hospital, check if it is allowed.
Electromagnetic waves emitted by the camera may interfere with the plane’s
instruments or the hospital’s medical equipment.
• To prevent fire and electrical shock, follow the safeguards below:
- Always insert the power plug all the way in.
- Do not handle a power plug with wet hands.
- When unplugging a power plug, grasp and pull the plug instead of the cord.
- Do not scratch, cut, or excessively bend the cord or ut a heavy object on the cord.
Also do not twist or tie the cords.
- Do not connect too many power plugs to the me pwer outlet.
- Do not use a cord whose insulation has bemage.
• Occasionally unplug the power plug ae a y cloth to clean off the dust around
the power outlet. If the surrounding is umi, or oily, the dust on the power outlet
may become moist and short-rcuit thto cause a fire.
Preventing Injury or Equipment Damage
• Do not leave equipment inside a car under the hot sun or near a heat source. The
equipment may become hot and cause skin burns.
• Do not carry the camera around while it is attached to a tripod. Doing so may cause
injury. Also make sure the tripod is sturdy enough to support the camera and lens.
• Do not leave a lens or lens-attached camera under the sun without the lens cap
attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may trap
heat within and cause the casing to deform or catch fire.
• If you drop the camera in water or if water or metal fragments enter inside the camera,
promptly remove the battery pack and back-up battery. This is to prevent fire and
electrical shock.
• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so
may cause battery leakage or a shorter battery life. The battery pack or back-up
battery can also become hot and cause skin burns.
• Do not use paint thinner, benzene, or other organic solvents to clean the equipment.
Doing so may cause fire or a health hazard.
If the product does not work properly or requires repair, contact
your dealer or your nearest Canon Service Center.
Download from Www.Somanuals.com. All Manuals Search And Download.
260
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
261
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
262
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
263
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
264
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
265
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
266
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
267
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
268
Software Start Guide
This chapter gives an overview the oftware in the
EOS DIGITAL Solution Disk (COM) provided with
the camera and explains o install the software in a
personal computer. Ialso ains how to view the pdf
files in the Software Instruction Manual CD-ROM.
EOS DIGITAL Solution Disk
Software Instruction Manual
(Software)
Download from Www.Somanuals.com. All Manuals Search And Download.
269
Software Start Guide
EOS DIGITAL Solution Disk
This disk contains various software for EOS DIGITAL
cameras.
EOS Utility
With the camera connected to a personal computer, EOS Utility enables
you to transfer still photos and movies shot with the camera to the
computer. You can also use the personal computer to set various
camera settings and shoot remotely with the computer connected to the
camera.
Digital Photo Professional
This software is recommended fouserwho mainly shoot RAW
images. You can view, edit, procnd print RAW images at high
speed. You can also edit JPEG ims while retaining the original
images.
ZoomBrowser EX (Win) / ImageBrowser (Mac)
This software is recommended for users who mainly shoot JPEG
images. You can easily view, edit, organize, and print JPEG images.
You can also play and edit MOV movies and extract still photos from
movies.
Picture Style Editor
You can edit Picture Styles and create and save original Picture Style
files. This software is aimed at advanced users who are experienced in
processing images.
Download from Www.Somanuals.com. All Manuals Search And Download.
270
Software Start Guide
Installing the Software
Do not connect the camera to your computer before you install the
software. The software will not be installed correctly.
Even if a previous version of the software is installed, install the software
by following the steps below (the newer version will overwrite the
previous version).
1
Insert EOS DIGITAL Solution Disk (CD-ROM).
For Macintosh, double-click to open the CD-ROM icon displayed
on the desktop, then double-click on [Canon EOS Digital
Installer].
2 Click [Easy Installation] and follow the on-screen
instructions to install.
For Macintosh, click [Install].
3 Click [Restart] and remove the CD-ROM after the
computer restarts.
When the computer has restarted, the installation is complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
271
Software Start Guide
Software Instruction Manual
Contains the Software Instruction Manuals.
Copying and Viewing the Instruction Manual PDFs
1 Insert the [Software INSTRUCTION MANUAL] CD-ROM
into your computer.
2 Double-click the CD-ROM icon.
For Windows, the icon is displayed in [(My) Computer].
For Macintosh, the icon is displayed on the desktop.
3 Copy the [English] folder to your cmputer.
Instruction Manual PDFs with the nambelow are copied.
Winows
Macintosh
EOS Utility
xW_E_xx
DPPx.xW_E_xx
EUx.xM_E_xx
DPPx.xM_E_xx
Digital Photo Professiona
ZoomBrowser EX /
ImageBrowser
ZBx.xW_E_xx
IBx.xM_E_xx
Picture Style Editor
PSEx.xW_E_xx
PSEx.xM_E_xx
4 Double-click the copied PDF file.
Adobe Reader (Version 6.0 or later) must be installed in your
computer.
Adobe Reader can be downloaded free from the Internet.
Download from Www.Somanuals.com. All Manuals Search And Download.
272
Quick Reference Guide
Menu Operations
<0> button
LCD
monitor
<S>
Cross keys
<M>
button
1. Press the <M> button to display the menu.
2. Press the <U> key to select a tab, then press the <V>
key to select the desired item.
3. Press <0> to display the setting.
4. After setting the item, press <0
Basic Zone Modes
ovie Shooting Mode
Tabs
Creative Zone
Modes
Menu items Menu settings
Download from Www.Somanuals.com. All Manuals Search And Download.
274
Quick Reference Guide
Image-recording Quality
ꢀ Select [1Quality], then press <0>.
ꢀ Press the <U> key to select the quality, then press <0>.
Image-recording quality
Recorded pixels
Possible shots
APicture StyleN
lect [2Picture Style], then
ss <0>.
ꢀ Press the <V> key to select
the Picture Style, then press
<0>.
Style
Description
PStandard
QPortrait
Vivid colors and sharp images.
Nice skin tones and slightly sharp images.
RLandscape Vivid blue skies and greenery and very sharp images.
V
Monochrome Black-and-white images.
Download from Www.Somanuals.com. All Manuals Search And Download.
275
Quick Reference Guide
Q Quick Control
ꢀ Press the <Q> button.
ꢀ The Quick Control screen will
appear.
Basic Zone Modes
Creative Zone Modes
Shutter speed
Shooting mode
Aerture
Highlight tone priority
ISO speed
Exposure
Flash exposure
compensation/
AEB setting
compensation
Auto Lighting
Optimizer
Picture Style
AF mode
Raise built-in flash
Image-recording
White
quality
balance
Drive mode
Metering mode
ꢀ In Basic Zone modes, the settable functions differ depending
on the shooting mode.
ꢀ
Press the <S> key to select a function, then turn the <6> dial to set it.
ꢀ To raise the built-in flash, select <s>, then press <0>.
Download from Www.Somanuals.com. All Manuals Search And Download.
276
Quick Reference Guide
Nomenclature
Power switch
Mode Dial
<D> Flash button
<6>
Main Dial
Shutter
button
Focus mode switch
<O> Aperture/Exposure
<A> AE lock button
compensation button
<S> AF point
selection button
<S>
Cross keys
Access lamp
<A> Live View shooting/
Movie shooting button
<0> Setting button
Download from Www.Somanuals.com. All Manuals Search And Download.
277
Quick Reference Guide
Shooting Settings Display
Shutter speed
Shooting mode
Aperture
ISO speed
Exposure level
indicator
Auto Lighting
Optimizer
White balance
Raise
Picture Style
built-in flash
AF mode
Image-recording
quality
Quick Control
icon
Possible shots
Meteing mode
Drode
Battery check
zxcn
OK
NG
Viewfinder Information
AF point activation indicator <•>
AF points
Focus
confirmation light
AE lock
Flash-ready
Flash exposure
compensation
Max. burst
Monochrome shooting
ISO speed
Shutter speed
Aperture
Exposure level indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
278
Quick Reference Guide
Basic Zone Modes
All the settings necessary for
shooting are set automatically. You
just press the shutter button, and
the camera does the rest.
1
7
C
2
Full Auto
Flash Off
Creative Auto
Portrait
3
4
5
6
Landscape
Close-up
Sports
Night Portrait
ꢀ
Pressing the <Q> button will display he Quick Control screen.
In the C/2/3/4/5/6shooting mode, press the <V>
key to select the function, theess the <U> key or turn
the <6> dial to set it asired.
D Using the Built-in Flash
Basic Zone Modes
If necessary, the built-in flash will pop-up automatically in
low-light or backlit conditions (except in the <7> <3> <5>
modes).
Creative Zone Modes
ꢀ Press the <D> button to raise the
built-in flash, then shoot.
Download from Www.Somanuals.com. All Manuals Search And Download.
279
Quick Reference Guide
Creative Zone Modes
You can change the camera
settings as desired to shoot in
various ways.
d: Program AE
The camera automatically sets the shutter speed and
aperture in the same way as the <1> mode.
ꢀ Set the Mode Dial to <d>.
s: Shutter-priority AE
ꢀ
ꢀ
Set the de Dial to <s>.
Te <6> dial to set the desired
shspeed, then focus the subject.
he aperture will be set automatically.
If the aperture display blinks, turn the
<6> dial until it stops blinking.
ꢀ
ꢀ
f: Aperture-priority AE
ꢀ
ꢀ
Set the Mode Dial to <f>.
Turn the <6> dial to set the desired
aperture, then focus the subject.
ꢀ The shutter speed will be set
automatically.
ꢀ If the shutter speed display blinks,
turn the <6> dial until it stops
blinking.
Download from Www.Somanuals.com. All Manuals Search And Download.
280
Quick Reference Guide
E: AF ModeN
ꢀ Set the lens focus mode switch
to <f>.
ꢀ Press the <ZE> button.
ꢀ Press the <U> key or turn the
<6> dial to select the AF
mode, then press <0>.
X(One-Shot AF):
For still subjects
9(AI Focus AF):
Switches the AF mode
automatically
Z(I Servo AF):
Foving subjects
S AF PointN
ss the <S> button.
ꢀ Press the <S> key to select the
AF point.
ꢀ While looking through the
viewfinder, you can select the
AF point by turning the <6>
dial until the desired AF point
flashes in red.
ꢀ Pressing <0> toggles the AF
point selection between the
center AF point and automatic
AF point selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
281
Quick Reference Guide
Z: ISO SpeedN
ꢀ Press the <WZ> button.
ꢀ Press the <U> key or turn the
<6> dial to select the ISO
speed, then press <0>.
ꢀ When [AUTO] is selected, the
ISO speed is set automatically.
When you press the shutter
button halfway, the ISO speed
setting will be displayed.
iDrive ModeN
ꢀ the <Yij> button.
ꢀ Press the <U> key or turn the
<6> dial to select the drive
mode, then press <0>.
u : Single shooting
i : Continuous shooting
j : Self-timer:10 sec*
l: Self-timer:2 sec
q: Self-timer:Continuous*
* The <j> and <q> drive
modes can be selected in all
shooting modes (except <k>).
Download from Www.Somanuals.com. All Manuals Search And Download.
282
Quick Reference Guide
A Live View Shooting
ꢀ Press the <A> button to display
the Live View image.
ꢀ Press the shutter button halfway
to focus.
resthe shutter button
mpletely to take the picture.
ꢀ Live View shooting settings will appear under the [2] menu
tab in Basic Zone modes and under the [z] menu tab in
Creative Zone modes.
ꢀ Battery Life with Live View Shooting
Temperature
No Flash
50% Flash Use
At 23°C / 73°F
Approx. 240 shots
Approx. 220 shots
Download from Www.Somanuals.com. All Manuals Search And Download.
283
Quick Reference Guide
k Shooting Movies
ꢀ Set the Mode Dial to <k>.
ꢀ Press the shutter button
halfway to focus.
(In the <k> mode, you cannot
take still photos even if you
press the shutter button
completely.)
ꢀ Press the <A> button to start
shooting a mvie.
ꢀ To stomovie shooting, press
A> button again.
Recording movie
Microphone
Download from Www.Somanuals.com. All Manuals Search And Download.
284
Index
Adjust
(exposure compensation) ........ 101
A
Measurement method
(Metering mode) ...................... 100
A-DEP
(Automatic depth-of-field AE)..........99
C
Camera
Center-weighted average
metering ....................................... 100
B
Download from Www.Somanuals.com. All Manuals Search And Download.
286
Index
F
D
E
Focusing
Download from Www.Somanuals.com. All Manuals Search And Download.
287
Index
G
H
Maximum ISO speed
with IO Auto............................. 78
L
I
Image
Jump display
(Image browsing)......................177
Peripheral illumination
correction................................. 108
Download from Www.Somanuals.com. All Manuals Search And Download.
288
Index
Editing out first and
last scenes............................... 188
M
N
Noise reduction
O
P
Download from Www.Somanuals.com. All Manuals Search And Download.
289
Index
S
A-DEP (Automatic depth-of-field
AE)............................................. 99
Q
R
Download from Www.Somanuals.com. All Manuals Search And Download.
290
Index
W
T
U
V
Download from Www.Somanuals.com. All Manuals Search And Download.
291
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
U.S.A.
CANON U.S.A. INC.
One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.
For all inquires concerning this product, call toll free in the U.S.
1-800-OK-CANON
CANADA
CANON CANADA INC. HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada
CANON CANADA INC. MONTREAL BRANCH
5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada
CANON CANADA INC. CALGARY OFFICE
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada
For all inquiries concerning this product, call toll free in Canada
1-800-OK-CANON
EUROPE,
CANON EUROPA N.V.
AFRICA &
Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands
CANON FRANCE S.A.S.
MIDDLE EAST
17,Quai du Président Paul Doumer, 92414 Courbevoie Cedex, France
CANON UK LTD.
Woodhatch Reigate,Surrey RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano 8, 20097 San Donato Milanese, (MI), Ily
CANON Schweiz A.G.
Industriestrasse 12, 8305 Dietlikon, and
Canon GmbH
Zetschegasse 11, A-1230 Vustr
CANON España,S.A.
Av. De Europa,6 Alobendas adrid, Spain
CANON Portugal .A.
Rua Alfredo da Silv14 Alfgide 2610-016 Amadora, Portugal
CENTRAL &
CANON LATIN AMERICA, INC.
SOUTH AMERICA 703 Waterford Way, Suite 400 Miami, FL 33126,U.S.A.
ASIA
CANON (China) Co., LTD.
15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632
CANON KOREA CONSUMER IMAGING INC.
Canon BS Tower 5F, #168-12 Samseong-dong, Gangnam-gu, Seoul, Korea
OCEANIA
JAPAN
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
CANON MARKETING JAPAN INC.
16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan
This Instruction Manual booklet is current as of January 2011. For information on
the camera’s compatibility with any accessories and lenses introduced after this
date, contact any Canon Service Center.
CT1-7194HE-002
© CANON INC. 2012
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Black Box Surge Protector In Line Surge Protector User Manual
Black Decker Pole Saw NPP2018 User Manual
Black Decker Sander 4044 09 User Manual
Bosch Appliances Car Amplifier PLE 2MA120 US User Manual
Bosch Appliances Dishwasher SHU53E User Manual
Boston Acoustics Switch PV350 User Manual
Bushnell Hunting Equipment 743333 User Manual
Capresso Hot Beverage Maker 260 User Manual
Carrier Fan 38AK007 User Manual
Celestron Binoculars C5 S User Manual