Canon Camera Accessories 28 User Manual

ENGLISH

Software Starter Guide

(For the Canon Digital Camera Solution Disk Version 28)

You must install the software bundled on the Canon

Digital Camera Solution Disk before connecting the

camera to the computer.

Connect the camera

Install the software.

to the computer.

Windows

Macintosh

p. 11

p. 44

• This guide explains how to install the software programs and

briefly introduces their functions and operating procedures.

• Please read the software license agreement in this guide before

using the software. By using the software, you agree to be

bound by the terms of the agreement.

CDI-E233-010

xx04xxxx

PRINTED IN JAPAN

Download from Www.Somanuals.com. All Manuals Search And Download.

READ CAREFULLY BEFORE USING

Canon Software License Agreement

IMPORTANT - READ CAREFULLY BEFORE INSTALLING THE SOFTWARE! This document is a legal

agreement ("Agreement") between you and Canon Inc. ("Canon") and governing your use of this

software, and online manual or other electronic documentation, and sound data and image data,

if any (the "Software"). BY INSTALLING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE

TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT,

PROMPTLY STOP THE INSTALLATION PROCESS.

1. GRANT OF LICENSE

(1) Canon grants you a non-exclusive license to use ("use" shall mean storing, loading, installing,

executing, or displaying) the Software on your computers solely for use with Canon product. You may

allow other users of Canon's product to use the Software, provided that you shall impose on them on

the assurance that such users shall abide by the terms of this Agreement and shall be subject to

restrictions and obligations hereunder.

(2) With respect to the sound data and image data of the Software which is instructed to be used as

installed in a Canon's digital still camera or digital video camcorder product ("Product") under the

documentation for such Product, Canon grants you a non-exclusive license to install to and use them as

installed in such Product.

(3) You may make one copy of the Software solely for back-up purpose, provided that you shall reproduce

the copyright notice in the Software, on a medium of such back-up copy; provided, however, that you

may not make any back-up copy when the Software is provided to you as stored in a medium and you

use the Software as installed in permanent storage unit (e.g., hard disk drive) of a computer. Any other

copying of the Software is a violation of this Agreement.

2. RESTRICTIONS

You shall not use or copy the Software except as expressly granted or permitted herein, and shall not assign,

sublicense, sell, rent, lease, loan, convey or transfer to any third party the Software, and you also shall not

have any third party to do so. In addition, you shall not alter, translate, modify, convert to any other

programming languages, disassemble, decompile or otherwise reverse engineer the Software and you also

shall not have any third party to do so. You shall not modify, remove or delete any copyright notices

appearing on the Software or on a medium, if any, on which the Software is delivered.

3. OWNERSHIP

Canon and its licensor retain in all respects the title, ownership and intellectual property rights in and to

the Software. Except as expressly provided herein, no license or right, express or implied, is hereby

conveyed or granted by Canon to you for any intellectual property of Canon.

4. EXPORT RESTRICTIONS

You agree to comply with all export laws and regulations of the country involved, and not to export or

re-export, directly or indirectly, the Software in violation of any such laws and regulations, or without all

necessary approvals.

5. SUPPORT AND UPDATE

Canon, Canon's subsidiaries and affiliates, their distributors and dealers are not responsible for

maintaining the Software and helping you to use the Software, or providing you with any updates, bug-

fixes or support for the Software hereunder.

6. LIMITED WARRANTY AND DISCLAIMER

LIMITED WARRANTY. THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OR

CONDITION OF ANY KIND, EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT

LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF DESIGN, QUALITY,

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ALSO, THERE IS NO

WARRANTY OR CONDITION OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION,

CORRESPONDENCE TO DESCRIPTION OR OF NONINFRINGEMENT WITH RESPECT TO THE

SOFTWARE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS

WITH YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU (AND NOT CANON, CANON'S

SUBSIDIARIES AND AFFILIATES, THEIR DISTRIBUTORS AND DEALERS) ASSUME THE ENTIRE COST

OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME STATES OR LEGAL

JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE

EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS

AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR

JURISDICTION TO JURISDICTION.

Canon, Canon's subsidiaries and affiliates, their distributors and dealers do not warrant that the

functions contained in the Software will meet your requirements or that the operation of the Software

will be uninterrupted or error free.

Download from Www.Somanuals.com. All Manuals Search And Download.

However, if you are provided with the Software as stored in a medium, Canon warrants the medium to

be free from defects in materials and workmanship under normal use for a period of ninety (90) days

from the date of you obtained the same as evidenced by a receipt or otherwise.

CUSTOMER REMEDIES. Canon, Canon's subsidiaries and affiliates, their distributors and dealers' entire

liability and your exclusive remedy shall be the replacement of the medium not meeting the LIMITED

WARRANTY. The LIMITED WARRANTY does not apply if failure of the medium has resulted from

accident, abuse or misapplication of the Software and shall not extend to anyone other than you.

NO LIABILITY FOR DAMAGES. IN NO EVENT SHALL CANON, CANON'S SUBSIDIARIES AND

AFFILIATES, THEIR DISTRIBUTORS AND DEALERS BE LIABLE FOR ANY LOSS OR DAMAGES

WHATSOEVER (WHETHER KNOWN, FORESEEABLE OR OTHERWISE), INCLUDING WITHOUT

LIMITATION, ANY CONSEQUENTIAL, INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE, OR

OTHER DAMAGES WHATSOEVER (INCLUDING DAMAGES FOR LOSS OF PROFITS, BUSINESS

INTERRUPTION, LOSS OF DATA, LOSS OF CONFIDENTIAL OR OTHER BUSINESS INFORMATION, OR

OTHER COMPENSATORY, INCIDENTAL OR CONSEQUENTIAL DAMAGES) ARISING OUT OF OR IN

ANY WAY RELATED TO THE SOFTWARE, USE THEREOF OR INABILITY TO USE THE SOFTWARE

EVEN IF CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS OR DEALERS HAVE

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES OR LEGAL JURISDICTIONS

DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES, OR PERSONAL INJURY OR DEATH RESULTING FROM NEGLIGENCE

ON THE PART OF SELLER, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

DISCLAIMER OF INDEMNITY. CANON, ITS LICENSOR, CANON'S SUBSIDIARIES AND AFFILIATES, THEIR

DISTRIBUTORS AND DEALERS SHALL ASSUME NO OBLIGATION TO INDEMNIFY YOU AGAINST ANY

CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR USE THEREOF

INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY.

7. TERM

This Agreement is effective upon your acceptance hereof by installing the Software and remains in

effect until terminated. You may terminate this Agreement by destroying the Software including any

and all copies thereof. This Agreement shall also terminate if you fail to comply with any terms of this

Agreement. In the event that this Agreement terminates for your failure to comply with this

Agreement, in addition to Canon enforcing its respective legal rights, you must promptly destroy the

Software including any and all copies thereof. Notwithstanding the foregoing, Sections 3, 5 through 7

and 9 through 11 shall survive any termination hereof.

8. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE

The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting

of "commercial computer software" and "commercial computer software documentation," as such

terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R.

227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users shall acquire the Software

with only those rights set forth herein. Manufacturer is Canon Inc./30-2, Shimomaruko 3-chome, Ohta-

ku, Tokyo 146-8501, Japan.

9. SEVERABILITY

In the event that any provision of this Agreement is declared or found to be illegal by any court or tribunal

of competent jurisdiction, such provision shall be null and void with respect to the jurisdiction of that

court or tribunal and all the remaining provisions of this Agreement shall remain in full force and effect.

10.GOVERNING LAW

The terms and conditions of this Agreement, the performance hereunder and the interpretation hereof

shall in all respects be governed and construed in accordance with the laws of Japan.

11.ACKNOWLEDGMENT

BY INSTALLING THE SOFTWARE, YOU AGREE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD

IT, AND AGREED THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF

AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND

SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER

COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE SUBJECT MATTER HEREOF. NO

AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED

REPRESENTATIVE OF CANON.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of contents

Read This First

It’s so Simple! Make Prints Right at Home Like a Pro ......................4

Unbounded Possibilities with Entertaining Software .....................6

System Requirements ........................................................................8

Programs and Compatible Operating Systems ................................9

Before You Connect the Camera to the Computer .......................10

Using the Software on the Windows Platform

– Preparations

Installing the Software and USB Driver ..........................................11

Using the Software on the Windows Platform

– The Basics

Downloading Images to the Computer ..........................................16

Printing Images ................................................................................21

Using the Software on the Windows Platform

– Advanced Techniques

The ZoomBrowser EX Windows ......................................................24

ZoomBrowser EX Features ..............................................................30

Replaying Movies .............................................................................33

Editing Movies .................................................................................34

Operating the Shutter Remotely ....................................................35

Merging Panoramic Images - PhotoStitch ......................................38

Enjoy Customizing Your Camera with the My Camera Settings ...39

Using the Software on the Macintosh Platform

– Preparations

Installing the Software ....................................................................44

Using the Software on the Macintosh Platform

– The Basics

Downloading Images to the Computer ..........................................46

Printing Images ................................................................................50

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of contents

Using the Software on the Macintosh Platform

– Advanced Techniques

The ImageBrowser Windows ..........................................................52

ImageBrowser Features ...................................................................58

Replaying Movies .............................................................................61

Editing Movies .................................................................................62

Operating the Shutter Remotely ....................................................63

Merging Panoramic Images - PhotoStitch ......................................66

Enjoy Customizing Your Camera with the My Camera Settings ...67

Appendices

ArcSoft PhotoStudio ........................................................................72

Uninstalling the Software ...............................................................74

Memory Card Folder Structure .......................................................77

Troubleshooting ..............................................................................78

Information about Your Camera

Non-Supported Programs and Features .........................................87

Index .................................................................................................88

Using the PDF Manuals

The following PDF-format manuals (hereafter PDF manuals) are provided to

explain the features and procedures for using ZoomBrowser EX and

ImageBrowser.

•ZoomBrowser EX Software User Guide (Windows)

•ImageBrowser Software User Guide (Macintosh)

Adobe Reader or Adobe Acrobat Reader must be installed to read

the aforementioned PDF manuals. If one of these applications is

not already installed on your computer, download it from the

following website.

http://www.adobe.com/products/acrobat/readstep2.html

Viewing PDF Manuals

Viewing Manuals Downloaded from a Website

These PDF-format manuals are available on the Canon website. Use your

browser program to download these manuals from the following URL:

http://web.canon.jp/Imaging/information-e.html

Download from Www.Somanuals.com. All Manuals Search And Download.

Read This First

This chapter explains what you can accomplish using the camera with the software contained

on the Canon Digital Camera Solution Disk.

It also lists the computer system configurations required to use the software.

About this Guide

•The explanations in this guide are based on Windows XP and Mac OS X v10.3. If you are

using another version of these operating systems, the actual screen contents and

procedures may vary slightly from those shown.

•The following terms are used in this guide.

Mac OS X is used for Mac OS X (v10.2-v10.4)

Memory card is used for CF cards, SD cards, MultiMediaCards and PC cards.

Method for Downloading to a Computer without Additional Software

Your camera uses a standard image transfer protocol called Picture Transfer Protocol (PTP).

With PTP and Windows XP or MaC OS X, you can download images without having to install

additional software. However, there are some inconveniences and limitations to this

downloading method. See the For Windows^®XP and Mac OS X Users leaflet for details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Read This First

It’s so Simple! Make Prints Right at Home

Like a Pro

Shoot the images

See your Camera User Guide for shooting instructions.

Install the software on the

computer

Windows (p. 11)

Macintosh (p. 44)

Just install the software once at the beginning.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect the camera to the computer

Precautions for

Connecting the

Camera to the

Computer (p. 10)

See your Camera User Guide for connecting instructions.

Download images to the computer

Windows (p. 16)

Macintosh (p. 46)

Print the images

Windows (p. 21)

Macintosh (p. 50)

Download from Www.Somanuals.com. All Manuals Search And Download.

Read This First

Unbounded Possibilities with Entertaining

Software

Print a Variety of Layouts

Print with the diverse layouts available in ZoomBrowser EX (Windows) and ImageBrowser

(Macintosh). The examples shown are from ZoomBrowser EX (Windows).

With One Photo per Page Print,

printing images is also easy.

Confirm all your images in one glance

with index (contact sheet) printing.

Stitch a Panorama Together

Create a panoramic image from a series of images with PhotoStitch.

Download from Www.Somanuals.com. All Manuals Search And Download.

Send an Image as an E-mail Attachment

Attach an image to an e-mail message by starting your mail software from within

ZoomBrowser EX (Windows) or ImageBrowser (Macintosh).

Operate the Camera Shutter from the Computer

You can use ZoomBrowser EX (Windows) or ImageBrowser (Macintosh) to operate the camera

shutter from the computer to shoot images (Remote Shooting). The recorded images are

downloaded directly to the computer.

The shutter is operated from the computer.

Edit a Movie

You can edit movies, linking movies and stills that have been downloaded to the computer,

adding text, such as titles, adding background music or applying various special effects.

Extract Stills from Movies

You can extract a still from the displayed movie and save it as a new image file. You can also

specify a range of frames and extract multiple stills.

Download from Www.Somanuals.com. All Manuals Search And Download.

Read This First

System Requirements

Please install the software on a computer meeting the following minimum requirements.

Windows

Windows 98 Second Edition (SE)

Windows Me

Windows 2000 Service Pack 4

Windows XP (including Service Pack 1 and Service Pack 2)

Computer Model

The above OS should be pre-installed on computers with built-in USB

ports.

CPU

Pentium 500 MHz or higher processor

RAM

Windows 98 SE/Windows Me: 128 MB or more

Windows 2000/Windows XP: 256 MB or more

Interface

USB

Free Hard Disk

Space

•Canon Utilities

- ZoomBrowser EX:

- PhotoStitch:

•Canon Camera TWAIN Driver:

•Canon Camera WIA Driver:

•ArcSoft PhotoStudio:

200 MB or more

40 MB or more

25 MB or more

50 MB or more

Display

1,024 x 768 pixels/High Color (16 bit) or better

Macintosh

Mac OS X (v10.2-v10.4)

Computer Model

The above OS should be pre-installed on computers with built-in USB

ports.

CPU

PowerPC G3/G4/G5

256 MB or more

USB

RAM

Interface

Free Hard Disk

Space

•Canon Utilities

- ImageBrowser:

- PhotoStitch:

200 MB or more

40 MB or more

50 MB or more

•ArcSoft PhotoStudio:

Display

1,024 x 768 pixels/32,000 Colors or better

Download from Www.Somanuals.com. All Manuals Search And Download.

•A CD-ROM drive is required to install the software.

•Even when system requirements are met, not all computer functions can be

guaranteed.

•A sound card is required to play movie file audio tracks under Windows.

•With Windows, QuickTime 6.5 is required to save images merged with

PhotoStitch as the QuickTime VR type. It is also required to play and edit

movies on the Windows 98 SE, Windows Me and Windows 2000 platforms.

QuickTime is included on the Canon Digital Camera Solution Disk.

•Macintosh software cannot be used on disks formatted in the UFS (Unix File

System) format.

Programs and Compatible Operating Systems

The CD-ROM labeled “Canon Digital Camera Solution Disk” is provided with all models. It

contains the following programs.

Windows Programs

Compatible OS

Windows Windows Windows Windows

Major Functions

2000

Program

Downloading, displaying,

organizing and editing images

ZoomBrowser EX

Driver for Canon brand cameras (for

Windows 98, Windows 2000)

TWAIN Driver

WIA Driver

PhotoStitch^*1

Driver (Windows Me)

Merging images to make panoramas

Advanced image editing

*1 *2

ArcSoft PhotoStudio

*1 Can be started from within ZoomBrowser EX.

*2 Image editing program manufactured by ArcSoft, Inc.

*3 Compatible with Windows 98 SE only.

*4 Driver not required because Windows XP supports PTP.

Macintosh Programs

Compatible OS

Mac OS X

Major Functions

Program

ImageBrowser

PhotoStitch^*1

ArcSoft PhotoStudio

Downloading, displaying, organizing and editing images

Merging images to make panoramas

Advanced image editing

*1 *2

*1 Can be started from within ImageBrowser.

*2 Image editing program manufactured by ArcSoft, Inc.

See ArcSoft PhotoStudio (p. 72) for information about this program.

Download from Www.Somanuals.com. All Manuals Search And Download.

Read This First

Before You Connect the Camera to the Computer

Ensure that you have installed the software from the supplied Canon Digital

Camera Solution Disk before you connect the camera to the computer.

Precautions for Connecting the Camera to the Computer

•The connection may not operate correctly if you attach the camera to the computer with an

interface cable via a USB hub.

•The connection may not operate correctly if you are using other USB devices, excluding USB

mice or keyboards, at the same time as the camera. If this occurs, disconnect the other

devices from the computer and try reconnecting the camera.

•Do not connect two or more cameras at the same time to the same computer. The

connections may not operate correctly.

•Never allow the computer to go into standby (sleep) mode while a camera is connected via

the USB interface cable. If it does happen, never disconnect the interface cable. Try to awaken

the computer with the camera in the connected state. Some computers will not awaken

properly if you disconnect the camera while they are in standby (sleep) mode. Please refer to

your computer manual for instructions regarding the standby (sleep) mode.

•You are recommended to power the camera from a household power source

(AC adapter) when connecting to a computer (if available for your camera

model). Ensure that you use fully charged batteries if you will not be using a

household power source.

•See the Camera User Guide for procedures connecting the camera to the

computer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows

Platform – Preparations

This chapter explains the basic procedures for installing the software and connecting the

camera to a computer. Read this material before you connect the camera to the computer.

Installing the Software and USB Driver

Start by installing the software from the Canon Digital Camera Solution Disk.

•You must install the software before you connect the camera to the

computer.

•Users of Windows XP and Windows 2000 must first log in as an Administrator

(computer system administrator) to install programs.

See ArcSoft PhotoStudio (p. 72) for details on how to install ArcSoft

PhotoStudio.

Items to Prepare

•Your camera and computer

•Canon Digital Camera Solution Disk

•Interface cable supplied with the camera

Installation Procedures

Confirm that the camera is NOT connected to

the computer.

If it is, disconnect the cable. The software cannot

be properly installed if the camera is connected to

the computer at the start.

Close any programs that are running.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows Platform – Preparations

Place the Canon Digital Camera Solution Disk in the

computer’s CD-ROM drive.

If the installer panel does not appear automatically, use the

following procedures.

How to Display the Installer Panel

Use the following procedures to display the installer panel if it does not appear

automatically.

Windows XP

1. Select [My Computer] from the [Start] menu.

2. Right-click the CD-ROM icon and select [Open].

3. Double-click the [SETUP.EXE]

icon.

Windows 2000, Windows Me, Windows 98 SE

1. Double-click the [My Computer] icon on the desktop.

2. Right-click the CD-ROM icon and select [Open].

3. Double-click the [SETUP.EXE]

icon.

Some computers may not display the [.EXE] file name extension as shown above.

Click the Digital Camera Software [Easy

Installation] button.

To individually select the software to install,

click [Custom Installation].

Installer Panel

Follow any instructions to restart your computer, if they appear. If the

following window appears, continue with the installation.

Download from Www.Somanuals.com. All Manuals Search And Download.

If other software is running, close each

program before clicking [OK].

Review the installation settings and

click [Install].

The items displayed here differ according to

the software installed.

When [Custom Installation] is Selected

The USB driver (the software for connecting) is required when the camera

is connected to the computer with an interface cable. Ensure that you

select a USB driver from below (the appropriate one for your operating

system).

•Windows 2000/Windows 98 SE: Canon Camera TWAIN Driver

•Windows Me: Canon Camera WIA Driver

With Windows XP, the USB driver supplied with the Windows operating

system is used so there is no need to install a USB driver.

Click [Yes] if you agree to all of the

terms of the software license

agreement.

The installation will start.

Follow the onscreen instructions to

proceed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows Platform – Preparations

When the installation is over, select

[Restart computer immediately

(Recommended)] and click [Restart].

At this stage, do NOT remove the Solution

Disk from the CD-ROM drive yet.

If there is no need to restart the computer, the [Finish] screen will display. Click [Finish],

remove the Solution Disk from the CD-ROM drive and proceed to Step 10.

Users of Windows XP and Windows 2000 must log in as an Administrator

(computer system administrator) after restarting to carry out the

subsequent procedures.

Remove the disk from the CD-ROM drive when your

normal desktop screen appears after restarting.

This concludes the software installation.

Continue by connecting the camera to the computer so

that the USB driver can be utilized.

If you installed a USB driver, so far the required files have only been

copied to your computer. You must now connect the camera to the

computer with the interface cable to complete the installation and

prepare the driver for use.

See Uninstalling the Software (p. 74) to delete the installed programs.

10 Attach the camera to the computer with the

interface cable and set the camera to the

correct mode for connecting.

Download from Www.Somanuals.com. All Manuals Search And Download.

Procedures for attaching the camera to the computer and placing the

camera in the correct mode for connecting vary between camera models.

See the Camera User Guide.

If the Digital Signature Not Found window

appears, click [Yes].

The USB driver will automatically finish installing onto the computer when you attach the

camera and open a connection.

Dialogs similar to the following will appear during this process (first time the camera is

connected to a computer only).

Windows XP

The dialog on the right will appear after a

few moments.

Windows 2000/Windows Me/Windows 98 SE

Restart the computer according to the instructions if you are prompted to do so by a

message.

A dialog allowing you to set the default settings will display after installation. See Using

the Software on the Windows Platform – The Basics (p. 16) for the subsequent

procedures.

•See USB driver installation not proceeding well in the Troubleshooting

section (p. 78) if you are having problems installing the USB driver.

•See Uninstalling the USB Driver (p. 75) to delete the USB driver installed

with these procedures.

•See If You Were Using ZoomBrowser EX Version 2 or 3 (p. 85) if you

were previously using either version.

This concludes the software and USB driver installation and the procedures for connecting the

camera to the computer.

You may now download camera images to the computer (p. 16).

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows

Platform – The Basics

This chapter explains the procedures for using ZoomBrowser EX to download the camera's

images to the computer and print them.

Read this chapter after completing the preparations in the Using the Software on the Windows

Platform – Preparations section.

Downloading Images to the Computer

Begin by downloading the images to your computer. The downloading procedure is slightly

different according to whether you are using a camera to computer connection (see below) or

a memory card reader (p. 19).

You may not be able to download images when the camera is connected to a

computer if there are a large number of images (approximately 1000) on the

memory card. Use a memory card reader to download in that case.

Camera to Computer Connection

Attach the supplied interface cable to the computer’s USB port and the camera’s

DIGITAL Terminal. Prepare the camera for communication with the computer.

Procedures for attaching the camera to the computer and placing it in

the correct mode for connecting vary between camera models. See the

Camera User Guide.

The Camera Control Window will appear.

Camera Control Window

Download from Www.Somanuals.com. All Manuals Search And Download.

First Time Camera is Connected to a Computer

Set the following settings the first time you connect the camera to the computer. These

procedures are not required from the second connection onward.

Select [Canon CameraWindow] when a

dialog (Events dialog) similar to that on

the right displays and click [OK].

Your camera model name or [Canon

Camera] will appear here.

Different programs may display

according to your computer setup.

If this Events dialog does not appear, click the [Start] menu and select

[All Programs] or [Programs], followed by [Canon Utilities],

[CameraWindow], [PowerShot - IXY - IXUS - DV 6] and

[CameraWindow].

Download the images.

Download the images using the camera or

the computer. By default, the downloaded

images are saved into the [My Pictures]

folder.

Placing a check mark here causes this

window to automatically open when the

camera and computer are connected.

You can adjust the settings, such as the type

of image downloaded and the destination

folder, by clicking [Preferences].

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows Platform – The Basics

Using the Camera to Download Images (Direct Transfer Function)

•If the conditions are right for the Direct Transfer function, the Direct

Transfer settings menu will appear in the LCD monitor. In addition, the

(Print/Share) button will light if your camera is equipped with one.

•See the Camera User Guide for instructions regarding Direct Transfer

settings and procedures.

Set the Direct Transfer settings on the

camera and press the

button or the SET button.

(Print/Share)

Using the Computer to Download Images

Click [Starts to download images].

•By default, all the images that have yet to be downloaded will download.

•To download images that have had their transfer settings set with the

camera, click [Preferences] and select [Images whose transfer settings

were specified with the camera] as the image type to be downloaded.

•Click [Lets you select and download images] to show the camera images

in a list, check the images before downloading and download only

selected images.

The downloaded images will be saved into folders according to their shooting date.

Download from Www.Somanuals.com. All Manuals Search And Download.

By default, when downloading is complete,

the thumbnails (tiny versions) of the

downloaded images display in

ZoomBrowser EX’s Main Window.

Thumbnail

The downloaded symbol displays on

downloaded folders (the symbol will

disappear when you exit ZoomBrowser EX).

Next, print out the images (p. 21).

Memory Card Reader Connection

Insert the memory card into the reader.

Use a separately sold card adapter if required.

See the manual for the memory card reader for its connection and handling instructions.

Select [View/Download Images using

Canon CameraWindow] when the

dialog to the right appears and click

[OK].

The Camera Control Window will display.

If the dialog above fails to appear, click the [Start] menu and select [All

Programs] or [Programs], followed by [Canon Utilities], [CameraWindow],

[PowerShot - IXY - IXUS - DV 6] and [CameraWindow], and proceed to

Step 3.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows Platform – The Basics

Click [Starts to download images].

You can adjust the settings, such as the type

of image downloaded and the destination

folder, by clicking [Preferences].

•By default, all the images that have yet to be downloaded will

download to the [My Pictures] folder.

•To download images that have had their transfer settings set with the

camera, click [Preferences] and select [Images whose transfer settings

were specified with the camera] as the image type to be downloaded.

•Click [Lets you select and download images] to show the memory card

images in a list, check the images before downloading and download

only selected images.

•See Memory Card Folder Structure (p. 77) for information about

memory card folder structures and file names.

The downloaded images are saved into folders according to the shooting date.

By default, when the download is complete, the thumbnails (tiny versions) of the

downloaded images display in ZoomBrowser EX’s main window.

Next, print out the images (p. 21).

Download from Www.Somanuals.com. All Manuals Search And Download.

Printing Images

There are two ways in which images may be printed: One Photo per Page Print and Index Print.

This section explains the One Photo per Page Print method.

•Movies cannot be printed, but you can print stills after they have been

extracted from movies and saved to files.

•To use the Index Print option, click [Print] in the Main Window, followed by

[Index Print].

One Photo per Page Print

This option prints one image per page in a standard "photo" format. If you select multiple

images, it will print them on the corresponding number of pages.

Click [Print] in ZoomBrowser EX's Main Window, followed by [One Photo Per Page

Print].

•If you have installed the Easy-

PhotoPrint program that

accompanied a Canon-brand

printer, you will proceed to the

Easy-PhotoPrint printing window

shown at the right when you

select [One Photo per Page Print]

according to the default settings.

If a window similar to it opens,

read the Help menu for Easy-

PhotoPrint for instructions to proceed.

•To proceed to the ZoomBrowser EX printing window as shown in Step 2

when you select [One Photo per Page Print], click the [Tools] menu and

select [Preferences], followed by the [Printing] tab. Select [Use the Print

Function in ZoomBrowser EX].

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows Platform – The Basics

After confirming that [1. Select Images] is selected, select images.

You can select multiple images by holding the [Ctrl] down while clicking on successive

images.

The background of

selected images

changes to blue.

Click [2. Printer and Layout Settings] and adjust the categories as you feel

necessary.

Selects the printer

and the paper size

etc.

Sets printing to

"borderless," etc.

Place a check mark

here to print

shooting date/time

information with

images.

Sets the number

of print copies

This button switches between images if

multiple images were selected.

Click [3. Print].

Printing will start.

Download from Www.Somanuals.com. All Manuals Search And Download.

This chapter explained the ZoomBrowser EX basics. Once you have mastered them, try the

advanced techniques.

Using the Software on the Windows Platform – Advanced Techniques (p. 24).

•A PDF-format manual for ZoomBrowser EX is also available. It provides

further information about the program's features and procedures. See Using

the PDF Manuals (p. 2).

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows

Platform – Advanced Techniques

This chapter explains various ZoomBrowser EX features.

Proceed to this chapter once you have mastered the basic ZoomBrowser EX procedures in the

Using the Software on the Windows Platform – The Basics chapter.

To confirm whether your camera supports these functions, please refer to

Information about Your Camera (p. 87).

The ZoomBrowser EX Windows

This section describes the principal ZoomBrowser EX windows: the Main Window, Viewer

Window and Properties Window.

Main Window

This window is for displaying and organizing images downloaded to the computer.

Task Area (p. 25)

Function Buttons (p. 27)

Display Mode

(p. 26)

Display Control

Panel (p. 27)

Browser Area (p. 25)

Switches between showing and hiding

the Task Area and Folders Area.

Folders Area (p. 25)

Download from Www.Somanuals.com. All Manuals Search And Download.

Task Area

•ZoomBrowser EX's tasks are arranged here like

an index.

•Click a Task button to carry out the desired

task.

These features are described in ZoomBrowser

EX Features (p. 30)

Folders Area

•Use this area to select folders. The images in the selected folder display in the Browser Area.

If you select a network drive in advance with Windows Explorer, you can display network

folders, but you cannot add, change or delete those folders in the Browser Area.

•If you selected Favorite Folders, only the folders registered in advance as Favorite Folders will

display. You are recommended to register a folder that you use frequently as one of the

Favorite Folders. If you selected All Folders, all the folders will display.

Methods for Registering a Favorite Folder

•If [Favorite Folders] is displayed: click [Add] and select a folder.

•If [All Folders] is displayed: select a folder and click [Add to Favorites].

•

To delete a folder in the Favorite Folders area, select a folder and click the [Delete] button.

Browser Area

•The images in the folder selected in the Folders Area will display here.

The display style will vary according to your Display Mode selection.

Methods for Selecting Images in the Browser Area

•Selecting a single image: click on an image.

•Selecting multiple images: click on the first image and then hold the [Ctrl] key down

while clicking on additional images.

•Selecting consecutive images: click on the first image and then hold the [Shift] key down

while clicking on the last image.

•You can sort the image order in the Browser Area by file name, shooting date or other

characteristics by clicking the [Tools] menu and selecting [View] and [Sort by].

•The following icons will display around images according to their attributes.

Images shot with the camera's Stitch Assist mode

RAW images

Movies

Images with sound memo attachments

Protected images

Images shot with the camera's AEB function

Images shot with the camera on end that are rotated in the display only

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows Platform – Advanced Techniques

Display Mode

•Selects the display style for the Browser Area.

Zoom Mode

Displays all the images in a folder as thumbnail

images. This mode is convenient for searching

for images since many can be displayed at

once.

If additional folders are nested within a

folder, their images are displayed as

thumbnails as well.

If you move the mouse cursor over a folder,

will display on the upper right. Clicking

here displays that folder zoomed in.

Scroll Mode

This mode is convenient for checking the

images in multiple folders at once. If the

displayed folder is at the highest level, then all

thumbnails in the lower-level folders also

display. You can change the folder level (folder

depth) by clicking the [Tools] menu and

selecting [Preferences].

The images within nested folders also

display.

Preview Mode

This mode displays the image at a larger size as

well as the image information.

Positioning the mouse pointer over a thumbnail causes the image to appear

at a higher magnification in a Mouse Over Window. You can turn off this

function by clicking the

[Show Information], and removing the check

mark from the [Show Mouse Over Windows] option.

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Control Panel

•This panel adjusts the display settings for the Browser Area.

Selection Menu

Fit to Window

Display Size

Use this to select or deselect all Changes the thumbnail size to Changes the size of the

the images in the Browser Area. fit them into the window.

thumbnail in the Browser Area.

Show/Hide Image Information Menu

Use this to display or hide image

information beneath the thumbnails,

such as the file name, shooting date

or Star Rating.

Filter Images

This feature filters your images by

their Star Ratings, displaying only

those images in the Browser Area.

One of three Star Ratings can be

assigned to an image in the Viewer

Window, the Properties Window, or

in the information column in the

Preview Mode.

Select Button

Use this to select images

in Zoom mode.

Function Buttons

•These buttons are available for executing various functions.

Rotate Button

Rotates the selected

image.

Slide Show Button

Starts a slide show of the

selected images.

View Image Button

Displays the selected image

or movie in the Viewer

Window.

Properties Button

Displays information about

the selected image in the

Properties Window.

Search Button

Delete Button

Searches for images

Deletes selected

using such criteria as the images or folders.

Star Rating,

modification date,

shooting date,

comments or keywords.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows Platform – Advanced Techniques

Viewer Window

Double-click an image in the Browser Area to display it in the Viewer Window.

Edit Menu

Display AF Frame

Displaysthe AF Frame

(area used to focus).

You can edit, eliminating red eyes,

adjusting colors, cropping and

inputting titles. You can also use it to

start up other programs for editing.

Shooting

Synchronize Button

Synchronizes the

display settings when

multiple images are

displayed.

Information

Display Button

Displays image

shooting

Print Button

Prints the displayed image.

information.

Split Screen

Button

Displays

Image Selector

Button

Switches between

images.

multiple

images at

once. This is

handy for

comparing

images.

Displays images in

the Viewer

Window at their

actual size.

Sets the image

display size to the

size in the Viewer

Window.

Star Rating

Zoom

Sets the Star Rating for an image.

Changes the image

zoom setting.

Full Screen Button

Displays the image in the full screen mode. Click the

image or press any key on the keyboard to restore the

normal display mode.

•If a RAW image is displayed, the [Display Original Image] button displays

beneath it. Clicking this button displays the converted image in the Viewer

Window.

•If you are using Windows XP and display a movie file, the

(Capture Still

Frame) button will display beside the Star Ratings. Clicking this button

extracts still images from movies.

Download from Www.Somanuals.com. All Manuals Search And Download.

Properties Window

The Properties Window displays when you select an image in the Browser Area and click the

Properties button. The Properties Window does not display in the Preview Mode.

Shows or hides

categories.

Star Rating

Sets the Star Rating

for an image.

Plays a sound memo attached

to an image.

Protect

Prevents an image from being

overwritten or deleted.

Comment

You can type a comment here.

Keywords

Sets the keywords used in

searches.

Brightness Histogram

A graph of the highlights and

shadows distribution in an

image.

Shooting Information

Displays detailed

information about the

shooting settings when the

image was captured, such

as the shutter speed or

exposure setting. The

camera model will

determine what

Image Selector Buttons

Switches between images.

information is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows Platform – Advanced Techniques

ZoomBrowser EX Features

This section briefly introduces the Task Area functions.

To confirm whether your camera supports these functions, please refer to

Information about Your Camera (p. 87).

Acquire & Camera Settings

Connect to Camera

Clicking this connects to your camera and

opens the Camera Control Window, which lets

you perform the following operations.

•Acquire Images

Downloads images from the camera/memory card (p. 16, 19).

Additionally, you can download sound files recorded with the Sound Recorder function on

the camera.

•Print Images

Selects and prints the images in a camera. You can print numerous ways, using DPOF

settings, the Index Print option, One Photo per Page Print option, or by selecting images

before printing.

•Set to Camera

Sets camera settings, such as the My Camera settings (p. 39). It also uploads images from

the computer to the camera.

•Remote Shooting

Allows you to operate the camera shutter from the computer (p. 35).

Connect to EOS Camera

This can only be used with EOS series cameras. For details on this function, see the user guide

for your camera.

Acquire Images from Memory Card

Download images from a memory card (p. 19).

You can also download sound files recorded with the Sound Recorder function, or select

images on the memory card and print them.

View & Classify

View as a Slide Show

Starts a slide show of the images selected in the

Browser Area.

Rename Multiple Files

Changes the file names of the selected images in a single pass.

Classify into Folder

Classifies images and saves them into a specified folder.

Performs image searches using criteria such as the Star Rating, modification date, shooting

date, comments or keywords. Star Ratings, comments and keywords can be set in the image

information column in the Preview Mode or in the Properties Window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Edit

Edit Image

Allows you to perform image editing, such as

cropping, image correction and red-eye

correction. You can also use it to start other image editing programs.

Stitch Photos

Merges multiple images and creates a single large panoramic image (p. 38).

Edit Movie

Edits movies or still images strung together. You can add text as titles, or background music,

and apply various effects (p. 34).

Process RAW Images

Converts RAW images into standard images. You can adjust the image brightness, contrast

and color balance among other attributes during conversion.

Export

Export Still Images

Allows you to change the image size or type,

and export it as a new image.

Export Movies

Allows you to change the movie size or type, and export it as a new movie.

Extract frames from a movie

Extracts still images from movies over a specified interval and saves them as image files

(Windows XP only).

Export Shooting Properties

Allows you to select the necessary data from the shooting information and export it as a text

file.

Export as a Screen Saver

Exports the image as a screen saver file.

Export as a Wallpaper

Exports the image as a wallpaper file.

Backup to CD

Copies images to a CD-R/RW disk for backup.

The Backup to CD function can only be used on computers satisfying the

following requirements.

•Windows XP is preinstalled

•A CD-R/RW drive is included as standard equipment

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows Platform – Advanced Techniques

One Photo per Page Print

Prints one image per page (p. 21).

You can print "photo" prints easily.

Index Print

Lines up small versions of the images in rows and prints.

Print Using Other Software

Select the software to use and then print.

Internet

Email Images

Converts the selected images to the

appropriate size for transmission by e-mail. You

can also use it to automatically start an e-mail program after conversion.

•To return to the previous screen after selecting a task, click [Return to Main

Menu] at the bottom of the task screen.

•Various Help functions are available in ZoomBrowser EX. Click the [Help]

menu, [?] button or [Help] button to display topics about operational

procedures or the functions available.

Download from Www.Somanuals.com. All Manuals Search And Download.

Replaying Movies

Double-click an image with a movie icon in ZoomBrowser EX’s Browser Area.

The Viewer Window will open and play the movie.

You can save the displayed

scene as a still image by

clicking here.

You can control the

movie's playback and

sound volume.

Windows 2000, Windows Me and Windows 98 SE

QuickTime is required to play and edit movies. To install QuickTime, please follow these

procedures.

1. Place the Canon Digital Camera Solution Disk in the CD-ROM drive.

If the installer panel fails to appear automatically, display it using the procedures in the

How to Display the Installer Panel section (p. 12).

2 Click the QuickTime [Install] button.

Follow the onscreen instructions to proceed with the installation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows Platform – Advanced Techniques

Editing Movies

You can create and edit movies: link movies and stills that have been downloaded to your

computer, add background music, superimpose titles and other text, and apply various effects

to the movies.

•The QuickTime program is required to replay or edit movies on the Windows

2000, Windows Me or Windows 98 SE platform. Install it during procedures

in the "Replaying Movies" topic in the Windows 2000, Windows Me and

Windows 98 SE section (p. 33).

•Movies are saved as Motion JPEG AVI movies.

Click [Edit] in ZoomBrowser EX’s Main Window, followed by [Edit Movie].

Click [1. Add Images] and select the image (movie or still) you wish to edit.

You can select multiple movies or stills.

Follow the steps at the left of the window to edit the movie and save it.

Click this button for detailed

operational instructions.

Follow these steps

to proceed.

Instructions

Click this button to

play the movie

being edited.

Storyboard Area

Displays thumbnails of the selected

images.

Transition Effects Box

Appears between adjacent images

and displays the symbols of the

transition effects linking images.

Links images in order from left to right.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating the Shutter Remotely

You can record still images by using a computer to control the shutter of a connected camera.

This is particularly useful for checking images on the larger display of the computer as you

record them and for high volume photography without worrying about filling the camera’s

memory card.

Preparing for Remote Shooting

Attach the supplied interface cable to the computer's USB port and the camera's

DIGITAL terminal and place the camera in the correct mode for connecting.

•Methods for connecting the camera to the computer and placing it in

the correct mode for connecting vary between camera models. Please

refer to the Camera User Guide.

•Perform the settings described in First Time Camera is Connected to a

Computer (p. 17) the first time you connect the camera to the

computer.

The Camera Control Window will display.

Open the lens cover or remove the lens cap on models equipped with them.

Proceed to the next step if your model does not have one.

Click the [Remote shooting] tab.

Click [Starts Remote Shooting].

Select a destination for the captured images and click [OK].

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows Platform – Advanced Techniques

RemoteCapture Task Window

The RemoteCapture Task window has the following features.

Shows/Hides the

viewfinder or detailed

settings area.

Size and Resolution Selector

Selects the size and resolution at which images are captured.

Rotation Settings

Sets the rotation

parameters for

images after they are

captured.

You can add

Release Button

Releases the

shutter.

comments to images

by placing a check

mark here and

typing text in the

boxes below.

Slide this to zoom

the camera in or out.

Viewfinder Display

Click the [Start/Stop

Viewfinder] button

while a connection to

the camera is open to

display the image

Start/Stop Viewfinder

Button

Starts or stops the

viewfinder display.

Refresh Button

Resets the exposure,

focus and white

balance.

appearing in the

camera’s viewfinder.

Set the basic camera settings here.

•The settings available in the RemoteCapture Task window vary between

camera models.

•RemoteCapture Task locks the exposure and focus settings for the subject

matter in the Viewfinder section. If the lighting or distance to the subject

changes, click

to reset these settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Shooting

Ensure that you turn off your computer’s standby mode before you begin

remote shooting. The device performance cannot be guaranteed if the

computer enters the standby mode.

Click

and check the subject in the viewfinder.

Change the image size or resolution, the rotation settings and the settings at the

bottom of the window as required.

If you intend to hold the camera vertically to photograph a subject, you can save the

image to the computer with the correct orientation if you set the rotation settings in

advance.

If your camera’s shooting mode is equipped with the Auto Rotate

function and you set it to On, the image will automatically be rotated

and appear in the correct viewing orientation in the RemoteCapture Task

window.

Click the [Release] button.

•You can release the shutter by pressing the camera’s shutter button or

the keyboard’s space key.

•Other than the shutter button, the camera's buttons and switches,

including the zoom, cannot be operated while the camera is being

controlled with the Remote Shooting function.

•You may notice that the interval between the shutter release and

activation is slightly longer for remote shooting than when the camera

is used independently.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows Platform – Advanced Techniques

Merging Panoramic Images - PhotoStitch

You can create a wide panoramic image by merging several images. It is easier to merge

images if they are shot with the camera's Stitch Assist mode because PhotoStitch can

automatically detect the image order and orientation.

Images Shot in Stitch Assist Mode

A sequence of images shot in Stitch Assist mode is saved into a single folder when it is

downloaded from the camera. In addition, the symbol below displays by the image in the

Browser Area.

Symbol displayed by images shot in Stitch

Assist mode.

•See the Camera User Guide for information about shooting in Stitch

Assist mode.

•Images shot in Stitch Assist mode with a wide converter, teleconverter

or close-up lens cannot be merged accurately.

Starting PhotoStitch

Click [Edit] in the ZoomBrowser EX’s Main Window and click [Stitch Photos].

Click [1. Select Images] and select several images in the Browser Area.

Click [2. Open PhotoStitch].

Instructions

Merge the images following the instructions in the guidance panel at the top of

the PhotoStitch window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoy Customizing Your Camera with the My

Camera Settings

The start-up image, start-up sound, shutter sound, operation sound, and self-timer sound are

called the My Camera settings. You can add your favorite images and sounds from your

computer to the My Camera settings. This topic explains how to upload the My Camera

settings saved onto your computer to the camera and vice versa.

Displaying the My Camera Window

Attach the supplied interface cable to the computer's USB port and the camera's

DIGITAL terminal and place the camera in the correct mode for connecting.

•Methods for connecting the camera to the computer and placing it in

the correct mode for connecting vary between camera models. Please

refer to the Camera User Guide.

•Perform the settings described in First Time Camera is Connected to a

Computer (p. 17) the first time you connect the camera to the

computer.

The Camera Control Window will display.

Click the [Set to Camera] tab.

Click [Set My Camera].

The My Camera window will display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows Platform – Advanced Techniques

The My Camera Window Features

ZoomBrowser EX already contains several pre-recorded My Camera settings. You can check

these items with the My Camera window.

Tabs

Click here to switch between adjusting the settings individually or in themed sets.

Play Button

Plays the audio from the

settings file in the

camera.

Displays the list of

settings files saved

onto the computer.

Displays the settings in

the camera.

Delete Button

Deletes a settings file

from the camera.

Save to Camera Button

Saves a computer

settings file onto the

camera.

Play Button

Plays the audio from

the selected settings

file.

Delete Button

Deletes a settings file from

the computer.

Save to PC Button

Saves a camera settings

file onto the computer.

For cameras that can only register one My

Camera setting, the [Return to factory default

settings] button will display. Clicking this

button will return the My Camera setting to

the factory default setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

Saving the My Camera Settings to the Camera

•My Camera settings can be selected and saved in either of two ways to the

camera: individually or in theme sets.

•The “Animal” theme, for example, features an animal in the start-up image

and animal calls in each of the sound files. The names of the prepared files

for the various My Camera settings themes all begin with the same root

name. The start-up image and sound files in the "Animal" theme, for

example, all begin with "Animal~".

Do not detach the interface cable, turn the camera power off or disconnect

the camera from the computer while the My Camera settings are being saved

to the camera or the settings from the camera are being saved to the

computer.

Select the [Setup as a theme] tab in the My Camera window.

To set the start-up image or sound individually, click the [Set individually] tab and select it.

Select the settings file you wish to save to the camera from the My Computer list.

Select the setting from the Camera list that you would like to change and click

[Save to Camera].

This concludes the process of saving the My Camera settings to the camera.

The Camera list setting will change to the selected file. If a setting for this category has

previously been saved to the camera, it will be overwritten.

Repeat steps 1-3 as required.

To use this data on the camera, change the start-up image and sound settings on the

camera itself. Please see the Camera User Guide for these instructions.

Saving the Camera’s My Camera Settings to the Computer

Select the [Setup as a theme] tab in the My Camera window.

To set the start-up image or sound individually, click the [Set individually] tab and select it.

Select the settings files from the Camera list that you wish to save to the

computer.

Click [Save to PC].

Add a name to the settings file you are saving and click [OK].

This concludes the process of saving the My Camera settings to the computer.

Repeat steps 1-4 as required.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Windows Platform – Advanced Techniques

Adding New Data to the My Camera Window

Create a new image or sound file and add it to the My Camera window.

•Adding Image and Sound Files After Creating Them

Adding Original Start-up Images and Sounds After Creating Them

You can effortlessly create start-up image and sound files using the My Camera Maker

program (Windows XP or Windows 2000 only).

Click the [Edit] menu in the ZoomBrowser EX Main Window and select [Manage

My Camera].

The My Camera window will display.

Click the [Set individually] tab in the My Camera window, followed by the [Create

My Camera Data] button.

Add File Button

Adds images and sound files for use

as settings files. Added files display

in the list.

Connect to camera Button

Connects to the camera.

My Camera Maker will start.

Follow the instructions at the top part

of the My Camera Maker window and

create image or sound files.

Instructions

Download from Www.Somanuals.com. All Manuals Search And Download.

Once you have saved the file, click

You have now succeeded in adding the file as a settings file to the computer.

and close the My Camera Maker window.

To connect to the camera, click

[Connect to Camera].

You can add the settings files you just

added to the computer to the camera using

the same procedures as in "Saving the My

Camera Settings to the Camera" (p. 41).

•Use settings like those below when creating an image file for the start-

up image using an image editing program other than My Camera

Maker.

Compression Method

Data Sampling

Pixels (w x h)

: JPEG (Baseline JPEG)

: 4:2:0 or 4:2:2

: 320 x 240 pixels

•Use settings like those below when creating a sound file using a sound

recording program other than My Camera Maker.

Compression Method

Quantifying Bits

Sampling Frequency

: WAV (Monaural)

: 8 bit

: 11.025 kHz or 8.000 kHz

Use the following lengths as guidelines for the length of sound file that

can be saved to the camera.

Duration in Seconds

Type

11.025 kHz

1.0 sec. or less

0.3 sec. or less

2.0 sec. or less

8.000 kHz

Start-Up Sound

Shutter Sound

1.2 sec. or less

0.4 sec. or less

2.0 sec. or less

Operation Sound

Self-Timer Sound

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Macintosh

Platform – Preparations

This chapter explains the basic procedures for installing the software. Read this material before

you connect the camera to the computer for the first time.

Installing the Software

Start by installing the software from the Canon Digital Camera Solution Disk.

See ArcSoft PhotoStudio (p. 72) for details on how to install ArcSoft

PhotoStudio.

Items to Prepare

•Your camera and computer

•Canon Digital Camera Solution Disk

•Interface cable supplied with the camera

Installation Procedures

Close any programs that are running.

Place the Canon Digital Camera Solution Disk in the

computer’s CD-ROM drive.

Double-click the [Canon Digital Camera Installer] icon

in the CD-ROM window.

Click the Digital Camera Software

[Install] button.

Installer Panel

Download from Www.Somanuals.com. All Manuals Search And Download.

Select [Easy Installation] and click

[Next].

Select [Custom Installation] to select

programs individually for installation.

Click [Agree] if you agree to all of the

terms of the software license

agreement.

Review the installation settings and

click [Next].

Follow the onscreen instructions to

proceed.

When the installation is over, click [OK].

Click [Exit] in the installer panel and

remove the disk from the CD-ROM drive.

This concludes the software installation.

See Uninstalling the Software (p. 74) to delete the software installed

with these procedures.

Continue by downloading images to the computer (p. 46).

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Macintosh

Platform – The Basics

This chapter explains the procedures for using ImageBrowser to download the camera's images

to the computer and print them.

Read this chapter after completing the preparations in the Using the Software on the

Macintosh Platform – Preparations section.

Downloading Images to the Computer

Begin by downloading the images to your computer. The downloading procedure is slightly

different according to whether you are using a camera to computer connection (see below) or

a memory card reader (p. 48).

You may not be able to download images when the camera is connected to a

computer if there are a large number of images (approximately 1000) on the

memory card. Use a memory card reader to download in that case.

Camera to Computer Connection

Attach the supplied interface cable to the computer’s USB port and the camera’s

DIGITAL Terminal. Prepare the camera for communication with the computer.

Procedures for attaching the camera to the computer and placing it in

the correct mode for connecting vary between camera models. See the

Camera User Guide.

The Camera Control Window will appear.

If it does not open, click the [CameraWindow] icon in the Dock (the bar at the bottom of

the desktop). To set whether this window automatically opens when you connect the

camera to the computer, remove the check mark from the [Start when a camera is

connected] in the [File] menu in the Camera Control window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Download images.

Download the images using the camera or

the computer. By default, the downloaded

images are saved into the [Pictures] folder.

Camera Control Window

You can adjust the settings, such as the type

of image downloaded and the destination

folder, by clicking [Preferences].

Using the Camera to Download Images (Direct Transfer Function)

•If the conditions are right for the Direct Transfer function, the Direct

Transfer settings menu will appear in the LCD monitor. In addition, the

(Print/Share) button will light if your camera is equipped with one.

•See the Camera User Guide for instructions regarding Direct Transfer

settings and procedures.

Set the Direct Transfer settings on the

camera and press the

button or the [SET] button.

(Print/Share)

Using the Computer to Download Images

Click [Starts to download images].

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Macintosh Platform – The Basics

•By default, all the images that have yet to be downloaded will download.

•To download images that have had their transfer settings set with the

camera, click [Preferences] and select [Images whose transfer settings

were specified with the camera] as the image type to be downloaded.

•Click [Lets you select and download images] to show the camera images

in a list, check the images before downloading and download only

selected images.

By default, when the download is complete, the thumbnails (tiny versions) of the

downloaded images display in ImageBrowser’s Browser Window.

The downloaded symbol

displays on downloaded

folders (the symbol will

disappear when you exit

ImageBrowser).

Thumbnail

Continue by printing out an image (p. 50).

Memory Card Reader Connection

Insert the memory card into the reader.

Use a separately sold card adapter if required.

See the manual for the memory card reader for details on how to connect and use the

reader.

The Camera Control Window will appear.

If it does not open, click the [CameraWindow] icon in the Dock (the bar at the bottom of

the desktop). To set whether this window automatically opens when you connect the

camera to the computer, remove the check mark from the [Start when a camera is

connected] in the [File] menu in the Camera Control window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Click [Starts to download images].

You can set the type of image to download

and the destination folder by clicking

[Preferences].

•By the default settings, all images are downloaded to the [Pictures]

folder.

•To download images that have had their transfer settings set with the

camera, click [Preferences] and select [Images whose transfer settings

were specified with the camera] as the type of image for downloading.

•Click [Lets you select and download images] to show the memory card

images in a list, check the images before downloading and download

only selected images.

•See Memory Card Folder Structure (p. 77) for information about

memory card folder structures and file names.

By default, when the download is complete, the thumbnails (tiny versions) of the

downloaded images will display in ImageBrowser's Browser Window when downloading

is complete.

Continue by printing out an image (p. 50).

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Macintosh Platform – The Basics

Printing Images

There are three ways in which images may be printed: One Photo per page Print, Index Print

and Layout Print. This section explains the One Photo per page Print method.

Movies cannot be printed, but you can print stills after they have been

extracted from movies and saved to files.

One Photo per page Print

This option prints one image per page in a standard "photo" format. If you select multiple

images, it will print them on the corresponding number of pages.

Select the images to print.

Clicking on an image selects it and displays a blue frame around it. To select multiple

images, hold down the [shift] or [ ] (command) key while clicking on images.

A blue frame

displays around

selected images.

Click [Print] and select [One Photo per

page Print].

Selecting [Index Print] allows you to print the thumbnails and shooting

information in a chart.

Selecting [Layout Print] allows you to layout and print multiple images on

a single sheet of paper.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set the categories as you feel necessary.

Selects a printer.

Selects options such as the paper size

and orientation when you click

[Page Setup].

Configures the auto trimming

function.

Place a check mark here to print the

shooting dates/times with the

images.

Sets the number of copies printed.

Click this button to switch between

images if you selected multiple

images.

Click [Print].

The Print window will now open.

After setting the number of copies, and other settings, click [Print].

After the printing finishes, click to close the window.

This chapter explained the ImageBrowser basics.

Once you have mastered them, try the advanced techniques.

Using the Software on the Macintosh Platform – Advanced Techniques (p. 52).

A PDF-format manual for ImageBrowser is also available. It provides further

information about the program's features and procedures. See Using the PDF

Manuals (p. 2).

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Macintosh

Platform – Advanced Techniques

This chapter explains various ImageBrowser features.

Proceed to this chapter once you have mastered the basic ImageBrowser procedures in the

Using the Software on the Macintosh Platform – The Basics chapter.

To confirm whether your camera supports these functions, please refer to

Information about Your Camera (p. 87).

The ImageBrowser Windows

This section describes the principal ImageBrowser windows: the Browser Window, Viewer

Window and File Information Window.

Browser Window

This window is for displaying and organizing images downloaded to the computer.

Browser Area (p. 53)

Display Mode (p. 54)

Explorer Panel (p. 53) Display Control Panel (p. 55) Control Panel (p. 55)

Download from Www.Somanuals.com. All Manuals Search And Download.

Explorer Panel

•Use this area to select folders. The images in the selected folder display in the Browser Area.

•If you selected Favorite Folders, only the folders registered in advance as Favorite Folders will

display. You are recommended to register a folder that you use frequently as one of the

Favorite Folders. If you selected All Folders, all the folders will display.

Methods for Registering a Favorite Folder

•If [Favorite Folders] is displayed: click [Add] and select a folder.

•If [All Folders] is displayed: select a folder and click [Add to Favorites].

Browser Area

•The images in the folder selected in the Explorer Panel will display here.

The display style will vary according to your Display Mode selection.

Methods for Selecting Images in the Browser Area

•Selecting a single image: click on an image.

•Selecting multiple images: click on the first image and then hold the [shift] or [

(command) key down while clicking on additional images.

]

•Selecting consecutive images: click on the first image and then hold the [shift] and

[option] keys down while clicking on the last image.

•The following types of icon will display around images according to their attributes.

Images shot with the camera's Stitch Assist mode

RAW images

Movies

Images with sound memo attachments

Protected images

Images shot with the camera's AEB function

Images shot with the camera on end that are rotated in the display only

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Macintosh Platform – Advanced Techniques

Display Mode

•Selects the display style for the Browser Area.

Preview

This mode displays the image at a larger size as

well as the image information.

List

Displays the images in the folder selected in the

Explorer Panel section in rows and columns.

TimeTunnel

Displays images in chronological order in a

simulated time tunnel. You can move along a

timeline from the past to the present using the

slider that appears at the window's right.

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Control Panel

•This panel adjusts the display settings for the Browser Area.

Display Size

Changes the size of the thumbnail in

the Browser Area.

Selection Menu

Use this to select or deselect all

the images in the Browser Area.

Hide Buttons

Filter Images

Left:

Hides the Explorer Panel.

This feature filters your images by their Star

Ratings, displaying only those images in the

Browser Area.

One of three Star Ratings can be assigned to

an image in the Viewer Window, the File

Information Window, or in the information

column in the Preview display mode.

Middle: Hides the control panel.

Right: Hides the image

information in the Preview

display mode.

Control Panel

•The control panel contains buttons for executing various functions.

The functions displayed here are explained in the Control Panel Features section (p. 58).

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Macintosh Platform – Advanced Techniques

Viewer Window

Double-click an image in the Browser Area to display it in the Viewer Window.

Zoom

Changes the

image zoom

setting.

Star Ratings

Sets the Star

Rating for an

image.

Image Selector Button

Switches between

images.

Show Information Button

Displays the AF frame

(focal point frame) and

the shooting information.

Save Button

Saves the edited image.

Print Button

Prints the displayed image.

Edit Menu

You can edit, performing such things as

cropping, adjusting colors and brightness,

eliminating red eyes and inserting texts.

You can also use it to start up other

programs for editing.

Full Screen Button

Displays the image in the full screen

mode. (You can also double-click an

image to display it in full screen mode).

Click the image or press any key on the

keyboard to restore the normal display

mode.

Number of Displays Menu

Displays multiple images at

once. This is handy for

comparing images.

Synchronize Button

Synchronizes the display

settings when multiple

images are displayed.

•If a RAW image is displayed, the [Show Original Image] button displays

beneath it. Clicking this button displays the converted image in the Viewer

Window.

•If a movie file is displayed, the [Save as Still Image] button will display

beside the Star Ratings.

Download from Www.Somanuals.com. All Manuals Search And Download.

File Information Window

The File Information Window displays when you select an image in the Browser Area, click the

[File] menu and select [Get Info]. The File Information Window does not display in the Preview

display mode.

Star Rating Menu

Sets the Star Rating for an image.

Shows or hides

categories.

Comment

You can type a comment

here.

Plays a sound

memo attached

to an image.

Keyword

Sets the keywords used in

searches.

Brightness Histogram

A graph of the highlights

and shadows distribution

in an image.

Lock

Prevents an image

from being

overwritten or

deleted.

Shooting Information

Image Selector Buttons

Switches between images.

Displays detailed information

about the shooting settings when

the image was captured, such as

the shutter speed or exposure

setting. The camera model will

determine what information is

displayed.

File Name

You can change

file names.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Macintosh Platform – Advanced Techniques

ImageBrowser Features

This section provides a brief introduction to ImageBrowser features.

To confirm whether your camera supports these functions, please refer to

Information about Your Camera (p. 87).

Control Panel Features

Canon Camera

Opens the Camera Control Window, which lets you perform the following operations.

Acquire Images

Downloads images from the camera/memory card (p. 46, 48).

Additionally, you can download sound files recorded with the Sound Recorder function on

the camera. Refer to the ImageBrowser PDF manual or Help for download instructions.

Selects and prints the images in a camera or memory card. You can print numerous ways:

print all images, print a contact sheet (index) of all images, print using DPOF settings, or by

selecting images before printing.

Set to Camera

Sets camera settings, such as the My Camera settings (p. 67). It also uploads images from the

computer to the camera.

Remote Shooting

Allows you to operate the camera shutter from the computer (p. 63).

View Image

Displays the selected image or movie in the Viewer Window.

SlideShow

Starts a slide show of the selected images. Click the [View] menu and select [Slide Show

Options] to set the slide show settings.

Internet

Create Images for Email

Converts the selected images to the appropriate size for transmission by e-mail. You can also

use it to automatically start an e-mail program after conversion.

Download from Www.Somanuals.com. All Manuals Search And Download.

One Photo per page Print

Prints one image per page (p. 50).

You can print "photo" prints easily.

Index Print

Lines up small versions of the images in rows and prints.

Layout Print

Allows you to freely arrange multiple images on a single page and print. You can also insert

captions and titles.

Send to Trash

Sends the selected images or folders to the Trash.

Functions Selected from Menus

Search Images: [File] menu, [Search]

Searches for images based on such criteria as Star Ratings, dates, keywords or captions.

Export Images: [File] menu, [Export Images]

•Edit and Save: allows you to change the file type or size and export the file.

•Export Shooting Properties: allows you to export the shooting properties as a text file.

•Export as a Screensaver: Exports the image as a screen saver file.

•Export an Image as Wallpaper: Exports the image as a wallpaper file.

Organize Images: [File] menu, [Organize Image]

•Sort Images: sorts images according to criteria such as the shooting date or Star Rating and

saves them into a specified folder.

•Rename: changes the files names of multiple images in a single pass.

Convert RAW Images: [File] menu, [RAW image processing]

Converts RAW images. You can adjust the image brightness, contrast and color balance

among other attributes during conversion.

Merge Panoramas: [Edit] menu, [PhotoStitch]

Merges multiple images and creates a single large panoramic image (p. 66).

Edit Movies: [Edit] menu, [Movie Edit]

Edits movies or still images strung together. You can add titles or background music and

apply various effects (p. 62).

Extracting Stills from Movies: [Edit] menu, [Extract frames from a movie]

Extracts still images from movies over a specified interval and saves them as image files.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Macintosh Platform – Advanced Techniques

Display Settings: [View] menu, [View Settings]

Hides or shows image information beneath the thumbnail, such as the file name or the

shooting date and time.

Sort Images: [View] menu, [Sort]

Arranges image order in the Browser Area according to criteria such as the filename, file

modification date, file size or shooting date.

Download from Www.Somanuals.com. All Manuals Search And Download.

Replaying Movies

Double-click an image with a movie icon in ImageBrowser’s Browser Area.

The movie will appear in the Viewer

Window.

Movie icon

Click the

button.

You can control the

movie's playback and

sound volume.

You can save the displayed scene

as a still image by clicking here.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Macintosh Platform – Advanced Techniques

Editing Movies

You can create and edit movies: link movies and stills that have been downloaded to your

computer, add background music, superimpose titles and other text, and apply various effects

to the movies.

Select the image(s) to edit in ImageBrowser’s Browser Area (movies or stills).

You can select multiple movies or stills.

Click the [Edit] menu and select [Movie Edit].

Follow the steps displayed in the middle of the window to edit the movie and save

it.

Follow these steps

to proceed.

Instructions

Click this button

for detailed

operational

instructions.

Click this button

to play the movie

being edited.

Storyboard Area

Displays thumbnails of the

selected images.

Links images in order from

left to right.

Transition Effect Box

Appears between adjacent

images and displays the

symbols of the transition

effects linking images.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating the Shutter Remotely

You can record still images by using a computer to control the shutter of a connected camera.

This is particularly useful for checking images on the larger display of the computer as you

record them and for high volume photography without worrying about filling the camera’s

memory card.

Preparing for Remote Shooting

Attach the supplied interface cable to the computer's USB port and the camera's

DIGITAL terminal and place the camera in the correct mode for connecting.

•Methods for connecting the camera to the computer and placing it in

the correct mode for connecting vary between camera models. Please

refer to the Camera User Guide.

•If the Camera Control Window does not automatically appear, click the

[CameraWindow] icon in the Dock (the bar at the bottom of the

desktop).

The Camera Control Window will display.

Open the lens cover or remove the lens cap on models equipped with them.

Proceed to the next step if your model does not have one.

Click the [Remote shooting] tab.

Click [Starts Remote Shooting].

Select a destination for the captured images and click [Choose].

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Macintosh Platform – Advanced Techniques

RemoteCapture Task Window

The RemoteCapture Task window has the following features.

Size and Resolution Selector

Selects the size and resolution at which

images are captured.

Shows/Hides the

viewfinder or

detailed settings

area.

Rotation Settings

Sets the rotation

parameters for

images after they are

captured.

You can add

comments to images

by placing a check

mark here and

typing text in the

boxes below.

Release Button

Releases the

shutter.

Slide this to zoom

the camera in or out.

Viewfinder Display

Click the [Start/Stop

Viewfinder] button

while a connection to

the camera is open to

display the image

Start/Stop Viewfinder

Button

Starts or stops the

viewfinder display.

appearing in the

camera’s viewfinder.

Refresh Button

Resets the exposure,

focus and white

balance.

Set the camera shooting settings here.

•The settings available in the RemoteCapture Task window vary between

camera models.

•RemoteCapture Task locks the exposure and focus settings for the subject

matter in the Viewfinder section. If the lighting or distance to the subject

changes, click

to reset these settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Shooting

Ensure that you turn off your computer’s sleep mode before you begin remote

shooting. The device performance cannot be guaranteed if the computer

enters the sleep mode.

Click

and check the subject in the viewfinder.

Change the image size or resolution, the rotation settings and the settings at the

bottom of the window as required.

If you intend to hold the camera vertically to photograph a subject, you can save the

image to the computer with the correct orientation if you set the rotation settings in

advance.

If your camera’s shooting mode is equipped with the Auto Rotate

function and you set it to On, the image will automatically be rotated

and appear in the correct viewing orientation in the RemoteCapture Task

window.

Click the [Release] button.

•You can also release the shutter by pressing the camera’s shutter button

or the keyboard’s space key.

•Other than the shutter button, the camera's buttons and switches,

including the zoom, cannot be operated while the camera is being

controlled with the Remote Shooting function.

•You may notice that the interval between the shutter release and

activation is slightly longer for remote shooting than when the camera

is used independently.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Macintosh Platform – Advanced Techniques

Merging Panoramic Images - PhotoStitch

You can create a wide panoramic image by merging several images. It is easier to merge

images if they are shot with the camera's Stitch Assist mode because PhotoStitch can

automatically detect the image order and orientation.

Images Shot in Stitch Assist Mode

A sequence of images shot in Stitch Assist mode is saved into a single folder when it is

downloaded from the camera. In addition, the symbol below displays by the image in the

Browser Area.

Symbol displayed by images shot in Stitch Assist

mode.

•See the Camera User Guide for information about shooting in

Stitch Assist mode.

•Images shot in Stitch Assist mode with a wide converter,

teleconverter or close-up lens cannot be merged accurately.

Starting PhotoStitch

Select a series of images in the ImageBrowser’s Browser Area.

Click the [Edit] menu and select

[PhotoStitch].

Instructions

Merge the images following the

instructions in the guidance panel at the top of the PhotoStitch window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoy Customizing Your Camera with the My

Camera Settings

The start-up image, start-up sound, shutter sound, operation sound, and self-timer sound are

called the My Camera settings. You can add your favorite images and sounds from your

computer to the My Camera settings. This topic explains how to upload the My Camera

settings saved onto your computer to the camera and vice versa.

Displaying the My Camera Window

Attach the supplied interface cable to the computer's USB port and the camera's

DIGITAL terminal and place the camera in the correct mode for connecting.

•Procedures for attaching the camera to the computer and placing it in

the correct mode for connecting vary between camera models. See the

Camera User Guide.

•If the Camera Control Window does not automatically appear, click the

[CameraWindow] icon in the Dock (the bar at the bottom of the

desktop).

The Camera Control Window will display.

Click the [Set to Camera] tab.

Click [Set My Camera].

The My Camera window will display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Macintosh Platform – Advanced Techniques

The My Camera Window

ImageBrowser already contains several pre-recorded My Camera settings items. You can check

these items with the My Camera window.

Type

Save to Camera

Save to Computer

Play Button

Select the settings type.

Plays the audio from

the settings file in the

camera.

Displays the list

of settings files

saved onto the

computer.

Displays the

settings in the

camera.

Delete Button

Deletes a settings

file from the

camera.

Send to Trash Button

Deletes a settings file

from the computer.

Save to Camera Button

Play Button

Plays the audio from the

selected settings file.

Click here to save the

settings onto the

camera.

For cameras that can only register one

My Camera setting, the [Return to

factory default settings] button will

display. Clicking this button will return

the My Camera setting to the factory

default setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

Saving the My Camera Settings to the Camera

•My Camera settings can be selected and saved in either of two ways to the

camera: individually or in theme sets.

•The “Animal” theme, for example, features an animal in the start-up image

and animal calls in each of the sound files. The names of the prepared files

for the various My Camera settings themes all begin with the same root

name. The start-up image and sound files in the "Animal" theme, for

example, all begin with “Animal~”.

Do not detach the interface cable, turn the camera power off or disconnect

the camera from the computer while the My Camera settings are being saved

to the camera or the settings from the camera are being saved to the

computer.

Select the type of setting in the Type list box that you wish to save to the camera.

Select the setting from the Computer list that you would like to add.

Select the setting in the Camera list that you would like to change and click the

button.

The Camera list setting will change to the selected file. If a setting for this category has

previously been saved to the camera, it will be overwritten.

Repeat steps 1-3 as required.

Click the [Save to Camera] button.

This concludes the process of saving the My Camera settings to the camera.

To use this data on the camera, change the start-up image and sound settings on the

camera itself. Please see the Camera User Guide for these instructions.

Saving the Camera’s My Camera Settings to the Computer

Select the type of setting you wish to save to the computer from the Type list box.

Select the setting in the Camera list that you wish to save to the computer.

Click the

button.

Input a file name to the selected setting and click the [OK] button.

This concludes the process of saving the My Camera settings to the computer.

Repeat steps 1-4 as required.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Software on the Macintosh Platform – Advanced Techniques

Adding New Data to the My Camera Window

Create a new image or sound file and add it to the My Camera window.

•Adding Image and Sound Files After Creating Them

Create an Original Start-up Image File and then Add It

Start by using an image editing program to create the image file that will become the start-up

image and save it to the computer.

Click the [File] menu in the ImageBrowser Main Window and select [Canon

Camera] and [My camera].

The My Camera window will display.

Select the [Start-up Image] in Type.

Click [Add].

Add Button

Adds images and

sound files for use as

settings files. Added

files display in the list.

Connect to Camera Button

Connects to the camera.

Select the file you created and click [Open].

This concludes the process for adding new data.

To connect to the camera, click [Connect to Camera].

You can add the settings files you just added to the computer to the camera using the

same procedures as in "Saving the My Camera Settings to the Camera" (p. 69).

Download from Www.Somanuals.com. All Manuals Search And Download.

Add an Original Sound File

Change the file to a WAV sound file after you have copied the sound file to the computer.

Then proceed with the steps as described in Create an Original Start-up Image File and then

Add It.

•Use settings like those below when creating an image file for the start-

up image with an image editing program.

Compression Method

Data Sampling

Pixels (w x h)

: JPEG (Baseline JPEG)

: 4:2:0 or 4:2:2

: 320 x 240 pixels

•Use settings like those below when creating a sound file with a sound

recording program.

Compression Method

Quantifying Bits

Sampling Frequency

: WAV (Monaural)

: 8 bit

: 11.025 kHz or 8.000 kHz

Use the following lengths as guidelines for the length of sound file that

can be saved to the camera.

Duration in Seconds

Type

11.025 kHz

1.0 sec. or less

0.3 sec. or less

2.0 sec. or less

8.000 kHz

Start-Up Sound

Shutter Sound

1.2 sec. or less

0.4 sec. or less

2.0 sec. or less

Operation Sound

Self-Timer Sound

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

This chapter introduces and explains how to install ArcSoft PhotoStudio, which is on the CD-

ROM supplied with your camera. It also explains how to uninstall the programs.

Read the Troubleshooting section in this chapter if you experience a problem using the

programs.

ArcSoft PhotoStudio

ArcSoft PhotoStudio is a high-performance yet easy-to-use image editing program from

ArcSoft, Inc. It can process, edit and print images. It includes color corrections, brightness

adjustments and special effects. Install it from the supplied CD-ROM, the Canon Digital Camera

Solution Disk, as required.

Installing ArcSoft PhotoStudio

Windows

Close all programs that are running.

Place the Canon Digital Camera Solution Disk in the CD-ROM drive.

If the installer panel displays, click [Exit] to close it.

Click the [Start] menu, and select [My Computer].

Windows 2000, Windows Me and Windows 98 SE users, double-click the [My Computer]

icon on the desktop.

Right-click the CD-ROM icon and select [Open].

Double-click the [ARCSOFT] folder or right-click it and select [Open], and double-

click the [SETUP.EXE] icon

Follow the onscreen messages to proceed with the installation.

Macintosh

Close all programs that are running.

Place the Canon Digital Camera Solution Disk in the CD-ROM drive.

Open the CD-ROM and double-click [ARCSOFT], followed by the [PhotoStudio

Installer] icon

Follow the onscreen messages to proceed with the installation.

Click [OK] when a message appears stating that the installation is complete.

Download from Www.Somanuals.com. All Manuals Search And Download.

Starting ArcSoft PhotoStudio

You can start ArcSoft PhotoStudio from within ZoomBrowser EX (Windows) or ImageBrowser

(Macintosh).

ZoomBrowser EX

Click [Edit] in the Task Area of the Main Window, followed by [Edit Image].

Confirm that [1. Select Images] is selected and select an image to edit.

Click [2. Select Editing Tool] and select [Edit with external image editor].

Select ArcSoft PhotoStudio from the program list and click [3. Finish].

If you cannot select ArcSoft PhotoStudio, register the program using the

following procedures.

1.In Step 3 above, select [Edit with external image editor] and click

[Manage List].

2.Click [Add] and select [ArcSoft PhotoStudio].

ImageBrowser

Select an image to edit, click the [Edit] menu and select [ArcSoft PhotoStudio].

Manual for ArcSoft PhotoStudio

You can obtain the ArcSoft PhotoStudio manual from the ArcSoft, Inc., website. Use your

browser program to download the manual from the following URL:

http://www.arcsoft.com/support

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

Uninstalling the Software

The procedures for uninstalling the software are only required when you wish to delete the

programs from your computer or when reinstallation is required to fix corrupted files.

Uninstalling the Software (Windows)

Software Installed from the Canon Digital Camera Solution Disk (excluding

ArcSoft PhotoStudio)

This explanation uses ZoomBrowser EX to demonstrate how to uninstall a program. You can

remove other programs with the same procedures.

Click the Windows [Start] menu and

select [All Programs] or [Programs],

followed by [Canon Utilities],

[ZoomBrowser EX] and [ZoomBrowser

EX Uninstall].

The uninstall utility will start and remove

ZoomBrowser EX.

Uninstalling ArcSoft PhotoStudio

•Uninstall the program by clicking the [Start] menu and selecting [Control Panel] and [Add or

Remove Programs].

•With Windows 2000/Me/98, uninstall the program by clicking the [Start] menu and selecting

[Settings] followed by [Control Panel] and [Add/Remove Programs].

Download from Www.Somanuals.com. All Manuals Search And Download.

Uninstalling the USB Driver (Windows)

Uninstall the USB Driver using the following procedures if you are using Windows 2000,

Windows Me or Windows 98 SE.

It is essential to note that you will not be able to download images if you

uninstall the USB driver.

You do not need to uninstall the USB driver with Windows XP.

Attach the supplied interface cable to the computer’s USB port and the camera’s

DIGITAL Terminal. Prepare the camera for communication with the computer.

For interface cable connection instructions, see the Camera User Guide.

Click the [Finish] button if the Camera Control Window displays.

Click the [Start] menu and select

[Settings], followed by [Control Panel].

Double-click the [Scanners and

Cameras] icon or folder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

Delete your camera model name or

[Canon Camera] in the [Scanners and

Cameras Properties] dialog.

Windows Me users should delete their

camera model or [Canon Camera] in the

[Scanners and Cameras] folder.

Windows 2000

Select your camera model name or [Canon Camera] and click [Remove].

Windows Me

Select your camera model name or [Canon Camera], right-click the mouse and select

[Delete].

Windows 98 SE

Select your camera model name or [Canon Camera] and click [Remove]. Then turn off the

camera and remove the interface cable from the computer's USB port.

If your camera model name does not appear here, see the Camera not

detected, Events dialog won’t display or images will not download to the

computer (p. 79) of the Troubleshooting section.

Click the Windows [Start] menu and select [Programs], followed by [Canon

Utilities], [Camera TWAIN Driver x.x] and [Uninstall TWAIN Driver]. A version

number appears in place of the “x.x”.

• Windows 2000, Windows 98 SE: Perform Step 6 with no substitutions.

• Windows Me: Substitute the following for the underlined portions of Step 6.

[Camera WIA Driver x.x], [Uninstall WIA Driver]

The uninstall process will start.

To connect the camera to the computer and download after this point, use the following

procedures.

1. Reinstall the driver.

2. Connect the camera to the computer with the interface cable.

Uninstalling the Software (Macintosh)

Uninstall the programs by dragging the application’s folder (the folder in which it was installed)

into the Trash, and then empty the Trash.

Please be careful not to accidentally delete any folders with downloaded

images that may be contained within the application folder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Memory Card Folder Structure

The images on a memory card are placed in the [DCIM] folder in subfolders labeled

[xxxCANON], where the “xxx” represents a number in the range 100 - 999.

IMG_xxxx.JPG (JPEG images)

_MG_xxxx.JPG (JPEG images recorded in the

Adobe RGB color space)

DCIM

xxxCANON

CRW_xxxx.CRW (RAW images)

_RW_xxxx.CRW (RAW images recorded in the

Adobe RGB color space)

CRW_xxxx.THM*

STx_xxxx.JPG** (Stitch Assist mode images)

MVI_xxxx.AVI (Movies)

MVI_xxxx.THM*

SND_xxxx.WAV (Sound annotation)

The folder that holds the settings files for

images in the DCIM folder.

CANONMSC

The folder created when DPOF settings are set.

It holds the DPOF settings files.

MISC

SNDR

SDR_xxxx.WAV (Files recorded with Sound Recorder)

xxxCANON

•*Files with the THM extension are the thumbnail image files for the camera’s index replay

mode.

•The “xxxx” in file names represent four-digit numbers.

•**Each successive file shot in Stitch Assist mode is assigned a letter starting from “A,” which

is inserted as the third digit in the name. i.e. [STA_0001.JPG], [STB_0002.JPG],

[STC_0003.JPG]...

•All folders except the “xxxCANON” folders contain image settings files. Do not open or delete

them.

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

Troubleshooting

Please read this section if you encounter a problem using the software.

Start by Checking This

Investigate the following points first if you encounter a problem.

Does your computer satisfy the requirements listed in the System

Requirements section (p. 8)?

Is the camera correctly connected to the computer?

See the Camera User Guide for the correct connection procedures. Also

check to ensure that you are using the correct cable and that it is securely

attached at both ends.

Is the camera set to the playback mode? (some models only)

Some models require the camera to be set to the playback mode to

transfer data. See the Camera User Guide for details.

Is the battery sufficiently charged?

Check the battery charge if you are powering the camera with a battery.

You are recommended to use a household power source (AC adapter) to

power the camera when it is connected to a computer (if available for

your camera model).

Problems

Try the suggested solutions to the common problems listed below.

USB driver installation not proceeding well (Windows)

Uninstall the driver (p. 75) before reinstalling it with the procedures in Installing

the Software and USB Driver (p. 11).

Download from Www.Somanuals.com. All Manuals Search And Download.

Add New Hardware Wizard or New Hardware Found (Windows 2000)

Wizard displays when the camera is connected to the computer with an

interface cable.

Click [Cancel] to close the window. Temporarily disconnect the camera from the

computer. Next, read Start by Checking This on the previous page and resolve

the problem.

Images won’t download into a TWAIN-compliant program (Camera and

computer connected via interface cable (Windows 2000, Windows 98 SE)).

Click the [Finish] button in the Camera Control Window to close it.

Cannot download images or shoot remotely. (For cameras connected to

the computer via an interface cable: only cameras supporting Hi-Speed

USB 2.0).

The problem may be resolved by lowering the transmission speed for data by

following the procedures below.

Solution:

Hold the MENU button on the camera down and press the

(Print/Share)

button and FUNC./SET button simultaneously. In the displayed screen, select [B]

and press the FUNC./SET button.

Camera not detected, Events dialog won’t display or images will not

download to the computer (when camera is connected to the computer

via an interface cable).

Cause 1:

There is a problem with one of the items in the Start by Checking This

section (p. 78).

Solution:

Resolve the problem.

Cause 2:

The USB driver is not installed (Windows only).

Solution:

Install it with the procedures in Installing the Software and USB Driver (p. 10).

Cause 3:

The USB driver is not correctly installed (Windows only).

Solution:

Uninstall the driver (p. 75) before reinstalling it with the procedures in Installing

the Software and USB Driver (p. 11).

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

Cause 4:

The camera may have been recognized as another device under the

following circumstances (Windows only).

• The camera was connected to the computer before the USB driver was

installed.

• The [Scanners and Cameras] icon or the [Scanners and Cameras] folder cannot

be found in the [Control Panel] or the [Printers and Other Hardware] window.

• Your camera model name, [Canon Camera] or a camera icon does not display

in the [Scanners and Cameras Properties] dialog or the [Scanners and

Cameras] folder.

Solution 1:

Start with the following procedures.

Install the USB driver with the procedures in Installing the Software and USB

Driver (p. 11). Then connect the camera to the computer with the interface

cable and prepare it to transfer data. If the USB driver is already installed,

uninstall it first and then reinstall it.

Solution 2:

If the problem is not resolved with the procedures in Solution 1, continue by

implementing the following procedures. The specific steps are explained below.

1. Check to see if the camera is being recognized as an “other” device.

2. Delete the driver and the setup information files if it is being recognized as an

“other” device.

3. Reinstall the driver.

This section explains the specific steps for each operating system.

Windows XP and Windows 2000

Users of Windows XP and Windows 2000 must first log in as an

Administrator (computer system administrator) to delete a driver.

Check to see if the camera is being recognized as an “other” device and

delete the driver if it is.

1. Windows XP: Click the [Start] menu, followed by [Control Panel],

[Performance and Maintenance] and [System].

Windows 2000: Click the [Start] menu and select [Settings] and [Control

Panel]. Double-click the [System] icon.

2. Click the [Hardware] tab, followed by [Device Manager].

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Click the

symbol beside the [Other devices] and/or [Imaging devices]

category. Your camera model name or [Canon Camera] will display in these

categories if it is being recognized as an “other” device.

There are other potential reasons for the problem if the “Other devices”

or “Imaging devices” categories do not appear or your camera model

name or [Canon Camera] does not appear. Proceed to Step 6,

temporarily quit the procedures and investigate the other potential

causes.

4. Select your camera model name or [Canon Camera], right-click and select

[Delete].

5. Click [OK] in the confirmation dialog.

Delete all instances of your camera model name or [Canon Camera] if it

appears in one or more places in the [Other devices] or [Imaging devices]

categories.

6. Close the System Properties window.

Step 7 and above are not required for Windows XP.

Delete the setup information files

7. Double-click the [My Computer] icon on the desktop, followed by the [C:]

drive, [WINNT] folder and [inf] folder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

If the [inf] Folder Is Not Visible in the [WINNT] Folder

Use the following procedures to show all files and folders.

1. Open the [WINNT] folder.

2. Click the [Tools] menu and select [Folder Options].

3. Click the [View] tab.

4. In the [Files and Folders] category in the Advanced Settings section, set [Hidden files

and folders] to [Show hidden files and folders]. Remove the check marks from [Hide

file extensions for known file types] if it is present.

5. Click [OK] to close the dialog.

This will make the hidden files and folders visible.

8. Look for files for Canon digital cameras that start with [CAP*].

The “*” represents a number, such as 0 or 1.

[CAP*] files come in pairs of [CAP*.inf] and [CAP*.pnf] files (For example,

[CAP0.inf] and [CAP0.pnf]).

9. Double-click the [CAP*] files to check their contents.

Double-clicking a [CAP*.inf] file will open it in the Windows Notepad

program. Look for [;****Canon Camera Driver Setup File****] in the first

line. Note down the names of these files.

Several sets of [CAP*] files may be present in the [inf] folder. Open up

each file to confirm that it is an [CAP*] file for Canon digital cameras

before you do anything with the file.

10.Delete the [CAP*] file set.

Delete the [CAP*.inf] and [CAP*.pnf] file for Canon digital cameras that you

noted down in Step 9.

The [inf] folder contains numerous files critical to the computer’s

operation. Be extremely careful to delete the correct files. If you delete

the wrong files, you may be unable to restart Windows.

Download from Www.Somanuals.com. All Manuals Search And Download.

Reinstall the driver.

11.Reinstall the driver with the procedures in Installing the Software and USB

Driver (p. 11).

Windows Me/Windows 98 SE

Check to see if the camera is being recognized as an “other” device and

delete the driver if it is.

1. Click the [Start] menu and select [Settings], followed by [Control Panel].

Double-click the [System] icon.

This will display the System Properties window.

2. Click the [Device Manager] tab.

3. Click the

symbol beside the [Other devices] and/or [Imaging devices]

category. Your camera model name or [Canon Camera] will display in these

categories if it is being recognized as an “other” device.

There are other potential reasons for the problem if the “Other devices”

or “Imaging devices” categories do not appear or your camera model

name or [Canon Camera] does not appear. Proceed to Step 6,

temporarily quit the procedures and investigate the other potential

causes.

4. Select your camera model name or [Canon Camera] and click [Remove].

5. Click [OK] in the confirmation dialog.

Delete all instances of your camera model name or [Canon Camera] if it

appears in one or more places in the [Other devices] or [Imaging devices]

categories.

6. Click [OK] to close the System Properties window.

Delete the setup information files.

7. Double-click the [My Computer] icon on the desktop, followed by the [C:]

drive, [WINDOWS] or [Windows] folder and [INF] or [Inf] folder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

If the [INF] Folder Is Not Visible in the [WINDOWS] Folder

Use the following procedures to show all files and folders.

1. Windows 98 SE: Click the [View] menu and select [Folder Options].

Windows Me: Click the [Tools] menu and select [Folder Options].

2. Click the [View] tab.

3. Windows 98 SE: Set the [Hide files] section to [Show all files].

Windows Me: Set the [Hidden files and folders] section to [Show hidden files and

folders].

4. Click [OK] to close the dialog.

This will make the hidden files and folders visible.

8. Find and delete the [DRVDATA.BIN] (or [Drvdata.bin]) and [DRVIDX.BIN] (or

[Drvidx.bin]) files.

9. In the [INF] or [Inf] folder, double-click the [OTHER] or [Other] folder to open

it.

10. Find and delete the [Canon.IncCAP xxx.Inf] file (The xxx

represents numerals.).

You do not need to delete anything if none of the above files are

contained in the [OTHER] folder.

The [INF] folder contains numerous files critical to the computer’s

operation. Be extremely careful to delete the correct files. If you delete

the wrong files, you may be unable to restart Windows.

Download from Www.Somanuals.com. All Manuals Search And Download.

Reinstall the driver

11.Reinstall the driver with the procedures in Installing the Software and USB

Driver (p. 11).

Zooming Images in ZoomBrowser EX is Slow or Not Working

Some graphics cards or settings may cause the display of zoomed images in ZoomBrowser EX

to slow down or malfunction. If this occurs, set your computer display's Hardware acceleration

setting to a lower setting.

1. Click the Windows [Start] menu, followed by [Control Panel] and

[Appearance and Themes].

With Windows 2000, Windows Me, or Windows 98 SE, click the [Start] menu

and select [Settings], followed by [Control Panel].

2. Click the [Display] icon, followed by the [Settings] tab, [Advanced] button and

[Troubleshoot] tab.

With Windows 2000, click the [Display] icon, followed by the [Settings] tab,

[Advanced] button and [Troubleshoot] tab.

With Windows Me or Windows 98 SE, click the [Display] icon, followed by

the [Settings] tab, [Advanced] button and [Performance] tab.

3. Set the [Hardware acceleration] to a setting below [Full] and click [OK].

4. Restart the computer if prompted.

If You Were Using ZoomBrowser EX Version 2 or 3

Take the following steps if you were using ZoomBrowser EX version 2 or 3 with Windows.

If Titles and Comments Were Attached to Your Images.

Take the following steps to display in version 5 the titles and comments you

input in version 2/3.

1. Use Windows Explorer to open the [Program] folder within the folder in

which you installed ZoomBrowser EX 5.

(e.g. C:\Program Files\Canon\ZoomBrowser EX\Program)

2. Double-click [dbconverter.exe] found in this folder to start this utility.

3. Select the database file you were using up to this point and click the [Start]

button.

(e.g. C:\Program Files\Canon\ZoomBrowser EX\Database\My Database.zbd)

This will display the titles and comments input in the earlier versions in the

comments section of ZoomBrowser EX 5.

If You Had Images in a Folder Below the Program Files Folder

Image files in the [Program Files] folder or a subfolder cannot be displayed in

ZoomBrowser EX 5 from that location. To display these files, first perform steps

1-3 above and then carry on with Step 4.

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendices

4. Use Windows Explorer to copy the folder and the images it contains from the

[Program Files] folder to another folder.

(e.g. Copy the image folders in C:\Program Files\Canon\ZoomBrowser

EX\Library One to another location.)

The moved folder images can now be selected and displayed with

ZoomBrowser EX 5.

Download from Www.Somanuals.com. All Manuals Search And Download.

Information about Your Camera

The software package and the procedures for connecting to a computer and preparing for data

transfers vary between camera models. Certain software functions may also not be supported

by some camera models.

Non-Supported Programs and Features

Applicable Camera Models

PowerShot SD700 IS DIGITAL ELPH/DIGITAL IXUS 800 IS

PowerShot SD630 DIGITAL ELPH/DIGITAL IXUS 65

PowerShot SD600 DIGITAL ELPH/DIGITAL IXUS 60

PowerShot A700

PowerShot A540

PowerShot A530

PowerShot A430

PowerShot A420

Non-Supported Functions

•The camera does not record RAW images.

•The camera does not support the Display AF Frame function in the View

Window.

•The camera shutter cannot be controlled from a computer.

•The camera does not support the Sound Recorder function.

Applicable Camera Models

PowerShot S3 IS

Non-Supported Functions

•The camera does not record RAW images.

•The camera does not support the Display AF Frame function in the View

Window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Favorite Folder

Macintosh...................................... 53

Windows ....................................... 25

File Information Window ....................... 57

Folders Area .................................. 24, 25

Function Buttons ............................ 24, 27

Adobe Reader (Adobe Acrobat Reader)...... 2

ArcSoft PhotoStudio ............................. 72

Image Icon Attribute

Browser Area

Macintosh...................................... 53

Windows ....................................... 25

ImageBrowser................................6, 7, 9

Index Print

Windows ....................................... 21

Information about Your Camera ............. 87

Installer Panel

Macintosh................................ 52, 53

Windows ................................. 24, 25

Browser Window.................................. 52

Camera Control Window

Macintosh...................................... 44

Windows ....................................... 12

Installing Software

Macintosh................................ 46, 48

Windows ................................. 16, 19

Canon Digital Camera Solution Disk.......... 9

Macintosh...................................... 44

Windows ....................................... 11

Comment

Macintosh...................................... 44

USB Driver...................................... 11

Windows ....................................... 11

Macintosh...................................... 57

Windows ....................................... 29

Computer ............................................. 8

Connecting to a computer..................... 10

Macintosh...................................... 46

Windows ................................. 14, 16

Control Panel........................... 52, 55, 58

Keyword

Macintosh...................................... 57

Windows ....................................... 29

Layout Print

Macintosh...................................... 50

DIGITAL IXUS 60 .................................. 87

DIGITAL IXUS 65 .................................. 87

DIGITAL IXUS 800 IS ............................. 87

Direct Transfer Function .................. 18, 47

Display Control Panel

Macintosh................................ 52, 55

Windows ................................. 24, 27

Display Mode

Main Window...................................... 24

Memory Card Folder Structure................ 77

Memory Card Reader

Macintosh...................................... 48

Windows ....................................... 19

Merging Panoramic Images

Macintosh...................................... 66

Windows ....................................... 38

My Camera Maker................................ 42

My Camera Settings

Macintosh................................ 52, 54

Windows ................................. 24, 26

Downloading Images

Macintosh...................................... 46

Windows ....................................... 16

Macintosh...................................... 67

Windows ....................................... 39

Easy-PhotoPrint.................................... 21

E-mail................................................... 7

Events Dialog................................. 17, 79

Extract Stills from Movies......................... 7

Download from Www.Somanuals.com. All Manuals Search And Download.

Star Rating

Macintosh..........................55, 56, 57

Windows ...........................27, 28, 29

One Photo per Page Print

Stitch Assist Mode

Macintosh...................................... 50

Windows ....................................... 21

Operating the Shutter Remotely ............... 7

Macintosh...................................... 63

Windows ....................................... 35

Macintosh...................................... 66

Windows ....................................... 38

System Requirements.............................. 8

Task Area................................24, 25, 30

Troubleshooting................................... 78

Start by Checking This...................... 78

PDF Manuals.......................................... 2

PhotoStitch ........................................... 6

Macintosh...................................... 66

Windows ....................................... 38

PhotoStudio ........................................ 72

PowerShot A420.................................. 87

PowerShot A430.................................. 87

PowerShot A530.................................. 87

PowerShot A540.................................. 87

PowerShot A700.................................. 87

PowerShot S3 IS................................... 87

PowerShot SD600 DIGITAL ELPH............. 87

PowerShot SD630 DIGITAL ELPH............. 87

PowerShot SD700 IS DIGITAL ELPH ......... 87

Print/Share button .......................... 18, 47

Printing Images

Uninstalling Software

Macintosh...................................... 76

Windows ....................................... 74

USB Driver

Uninstalling .................................... 75

USB Driver (TWAIN/WIA Driver)...........9, 13

Viewer Window

Macintosh................................ 56, 61

Windows ....................................... 28

Macintosh...................................... 50

Windows ....................................... 21

Programs and Compatible Operating Systems ...... 9

Properties Window ............................... 29

ZoomBrowser EX................................ 7, 9

Version 2/3..................................... 85

QuickTime

Windows ....................................... 33

Remote Shooting

Macintosh...................................... 63

Windows ....................................... 35

Replaying Movies

Macintosh...................................... 61

Windows ....................................... 33

Searching Images

Macintosh...................................... 59

Windows ....................................... 30

Shooting Information

Macintosh...................................... 57

Windows ....................................... 29

Download from Www.Somanuals.com. All Manuals Search And Download.

MEMO

Download from Www.Somanuals.com. All Manuals Search And Download.

MEMO

Download from Www.Somanuals.com. All Manuals Search And Download.

MEMO

Download from Www.Somanuals.com. All Manuals Search And Download.

MEMO

Download from Www.Somanuals.com. All Manuals Search And Download.

MEMO

Download from Www.Somanuals.com. All Manuals Search And Download.

Bosch Power Tools Grinder 0 601 375 039 User Manual
Bowers Wilkins Speaker CCM6 User Manual
Bravetti Food Processor FP86H User Manual
Briggs Stratton Automobile Parts 100200 User Manual
Broilmaster Gas Grill SSG 36 User Manual
Brother Sewing Machine ES 2000 User Manual
Carson Stereo Amplifier SA 500 16 14V User Manual
Casio Calculator fx 80 User Manual
Casio Cash Register QT 6000 User Manual
Chrysler Automobile 2006 Sebring Sedan User Manual