PUB.DIM-788
English
Digital Video Camcorder
Instruction Manual
Caméscope Numérique
Français
Español
Manuel d’instruction
Videocámara digital
Manual de Instrucciones
Digital
Video
Mini
Cassette
NTSC
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Important Usage Instructions
WARNING!
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
For Canada only:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO DRIPPING OR SPLASHING.
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING
INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
COPYRIGHT WARNING:
Unauthorized recording of copyrighted materials may infringe on the rights of
copyright owners and be contrary to copyright laws.
Digital Video Camcorder, ZR800 A systems
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and use in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
If such changes or modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
Important Warning
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure, that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
The exclamation point, within an equilateral
triangle, is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
QUALIFIED SERVICE PERSONNEL.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
IMPORTANT SAFETY INSTRUCTIONS
In these safety instructions the word
“apparatus” or “product” refers to the Canon
Digital Video Camcorder ZR800 A and all its
accessories.
17 Placing or Moving — Do not place on an
unstable cart, stand, tripod, bracket or
table. The product may fall, causing
serious injury to a child or adult, and
serious damage to the product. A product
and cart combination should be moved
with care. Quick stops, excessive force,
and uneven surfaces may cause the
product and cart combination to overturn.
1
2
3
4
5
6
7
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
18 Power Sources — The product should be
operated only from the type of power
source indicated on the marking label. If
you are not sure of the type of power
supply to your home, consult your product
dealer or local power company. Regarding
other power sources such as battery
Do not use this apparatus near water.
Clean only with dry cloth.
Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
power, refer to instructions in this manual.
19 Overloading — Do not overload wall outlets
and extension cords as this can result in a
risk of fire or electric shock.
8
9
Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
20 Objects and Liquid Entry — Never push
objects of any kind into this product
through openings as they may touch
dangerous voltage points or short out parts
that could result in a fire or electric shock.
Be careful not to spill liquid of any kind onto
the product.
Unplug this apparatus during lightning
storms or when unused for long periods of
time.
10 Read instructions — All the safety and
operating instructions should be read
before the product is operated.
21 Servicing — Do not attempt to service this
product yourself as opening or removing
covers may expose you to dangerous
voltage or other hazards. Refer all
11 Retain instructions — The safety and
operating instructions should be retained
for future reference.
12 Heed Warnings — All warnings on the
product and in the operating instructions
should be adhered to.
servicing to qualified service personnel.
22 Power Sources — The CA-590 Compact
Power Adapter should be operated only
from the type of power source indicated on
the marking label. If you are not sure of the
type of power supply to your home, consult
your product dealer or local power
13 Follow instructions — All operating and
maintenance instructions should be
followed.
14 Cleaning — Unplug this product from the
wall outlet before cleaning. Do not use
liquid or aerosol cleaners. The product
should be cleaned only as recommended
in this manual.
company. Regarding other power sources
such as battery power, refer to instructions
in this manual.
23 Lightning — For added protection of this
product during a lightning storm, or when it
is left unattended and unused for long
periods of time, disconnect it from the wall
outlet and disconnect the antenna. This will
prevent damage to the product due to
lightning and power-line surges.
15 Avoid magnetic or electric fields — Do not
use the camera close to TV transmitters,
portable communication devices or other
sources of electric or magnetic radiation.
They may cause picture interference, or
permanently damage the camera.
16 Water and Moisture — Hazard of electric
shock — Do not use this product near
water or in rainy/moist situations.
24 Overloading — Do not overload wall outlets
and extension cords as this can result in a
risk of fire or electric shock.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
25 Damage Requiring Service — Disconnect
this product from the wall outlet and all
power sources including battery, and refer
servicing to qualified service personnel
under the following conditions:
26 Replacement Parts — When replacement
parts are required, be sure the service
technician has used replacement parts that
are specified by Canon or that have the
same characteristics as the original part.
Unauthorized substitutions may result in
fire, electric shock or other hazards.
a. When the plug is damaged.
b. If any liquid has been spilled onto, or
objects have fallen into, the product.
c. If the product has been exposed to rain
or water.
d. If the product does not operate normally
even if you follow the operating
instructions. Adjust only those controls
that are covered by the operation
instructions. Improper adjustment of
other controls may result in damage and
will often require extensive work by a
qualified technician to restore the
product to its normal operation.
27 Safety Check — Upon completion of any
service or repairs to this product, ask the
service technician to perform safety
checks to determine that the product is in
safe operating order.
e. If the product has been dropped or the
cabinet has been damaged.
f. When the product exhibits a distinct
change in performance. This indicates a
need for service.
When replacement of the power supply is required, please return it to the responsible nearest
Canon Service Center and please replace it with the same type number CA-590.
This Class B digital apparatus complies with Canadian ICES-003.
The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to
disconnect the plug in case of an accident.
The adapter can be used with a power supply between 100 and 240 V AC. For areas where
120 V AC power is not used, you will need a special plug adapter. Contact your nearest Canon
Service Center for further information.
The adapter is not intended to be serviced. Should the product cease to function in its intended
manner, it should be returned to the manufacturer or be discarded.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Table of contents
Getting to Know the Camcorder
Supplied Accessories.................................................................................... 10
Components Guide....................................................................................... 11
Screen Displays............................................................................................ 13
Charging the Battery Pack............................................................................ 15
Inserting and Removing a Tape .................................................................... 17
Zooming........................................................................................................ 24
Magnifying the Playback Image.................................................................... 26
FUNC. Menu................................................................................................. 27
Setup menus................................................................................................. 27
Using the Recording Programs..................................................................... 32
Manual Exposure Adjustment....................................................................... 34
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Audio Recording Mode..................................................................................37
Audio Playback Modes..................................................................................38
Connection Diagrams....................................................................................42
Playback on a TV Screen..............................................................................43
Digital Video Dubbing....................................................................................44
PC Connection Diagrams..............................................................................45
Transferring Video Recordings......................................................................46
Troubleshooting.............................................................................................47
Using the Camcorder Abroad........................................................................55
System Diagram............................................................................................56
Download from Www.Somanuals.com. All Manuals Search And Download.
8
About this Manual
Thank you for purchasing the Canon ZR800. Please read this manual carefully before
you use the camcorder and retain it for future reference. Should your camcorder fail to
operate correctly, refer to the Troubleshooting table (
Conventions Used in the Manual
ꢀ
ꢀ
ꢀ
IMPORTANT: Precautions related to the camcorder’s operation.
NOTES: Additional topics that complement the basic operating procedures.
POINTS TO CHECK: Restrictions that apply if the function described is not
available in all operating modes (the operating mode to which the camcorder should be
set, etc.).
ꢀ
: Reference page number.
ꢀ“Screen” refers to the LCD and the viewfinder screen.
ꢀThe photos included in the manual are simulated pictures taken with a still camera.
First Time Settings
First Time Settings
Changing the Language
The language for on-screen and menu
displays can be changed. The list of
available languages depends on the
region where you purchased the
camcorder.
Menu item shown at its default position
Buttons and switches to be operated
Language Set
English, German, Spanish, French, Italian, Polish,
Russian, Simplified Chinese and Japanese.
A
Language Set
B
English, Simplified Chinese, Traditional Chinese
and Korean.
Default value
DISPLAY SETUP/
Brackets [ ] and capital letters are used to refer to menu
options as they are displayed on screen. Menu options in
boldface indicate the default setting (for example [ON],
[OFF]).
LANGUAGE ENGLISH
FUNC.
(
19)
1
2
Press
Select (
(
.
FUNC.
) the
) to open the setup menus.
icon and press
3
4
5
6
Select (
and press (
Select (
) [DISPLAY SETUP/
).
) [LANGUAGE] and press
) the desired option and
]
(
).
Select (
press (
Press
).
Names of buttons and switches are other than
the joystick indicated within a “button” frame
to close the menu.
FUNC.
NOTES
If you changed the language by mistake,
FUNC.
(for example
).
follow the mark next to the menu item to
About the Joystick and the Joystick Guide
The mini joystick allows you to control many of the camcorder’s operations and to
make selections and changes in the camcorder’s menus.
Push the joystick up, down, left or right (
item or change settings.
,
) to select an
Press the joystick itself (
) to save the settings or confirm an
action. On menu screens, this is indicated by the joystick icon
.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
The functions assigned to the joystick change according to the operation mode. You can
display the joystick guide to remind you of the joystick’s functions in each operating mode.
Recording:
Playback:
EXP
FOCUS
About the Operating Modes
The camcorder’s operating mode is determined by the position of the
switch. In the
manual,
indicates that a function is available in the operating mode shown and
indicates that the function is not available. When no operating mode icons are given, the
function is available in all operating modes.
Operating Mode
Switch
Icon Display
Operation
Recording movies on a tape
CAMERA
Playing movies from a tape
PLAY
Trademark Acknowledgements
•
is a trademark.
®
• Windows is a registered trademark of Microsoft Corporation in the United States and/or
other countries.
• Macintosh and Mac OS are trademarks of Apple Computer, Inc., registered in the United
States and other countries.
• Other names and products not mentioned above may be trademarks or registered
trademarks of their respective companies.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Getting to Know the Camcorder
Getting to Know the Camcorder
Supplied Accessories
CA-590 Compact Power BP-2L5 Battery Pack
Adapter
Lithium Button Battery
CR1616
STV-250N Stereo Video
Cable
Online product registration for U.S.A. Customers only.
Register your product online at www.registercanon.com
9 Protect your product
We will keep the model number and date of purchase of your new Canon product on
file to help you refer to this information in the event of an insurance claim such as loss
or theft.
9 Receive information on new products and promotions
Upon your request, we will send you information on Canon new products and
promotions.
The serial number of this product can be found at the battery attachment unit of the
camcorder. Write down the number and other information here and retain this book as a
permanent record of your purchase to aid identification in case of theft.
Date of Purchase:
Purchased From:
Dealer Address:
Dealer Phone No.:
Model Name: ZR800 A
Serial No.:
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Getting to Know the Camcorder
Components Guide
Left side view
Lens cover switch (
open, closed)
(
CHARGE indicator (
Speaker
AV terminal (
42)
MIC (microphone) terminal (
DV terminal (
Terminal cover
Grip belt (
Strap mount
Lock button
(
9)
switch (
Stereo microphone
Right Side View
Names of buttons and switches other than the
joystick are indicated within a “button” frame (for
FUNC.
example
).
Front view
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Getting to Know the Camcorder
Back view
Viewfinder (
Dioptric adjustment lever (
BATT. (battery release) switch (
Backup battery compartment (
Serial number, Battery attachment unit
DC IN terminal (
D.EFFECTS button (
18)
18)
(
15)
Joystick (
8)
Zoom lever (
24)
Mode switch (
Easy recording
Recording programs
Cassette compartment
OPEN/EJECT switch
Cassette compartment cover
(
Top view
(
(
(
Names of buttons and switches other than the
joystick are indicated within a “button” frame (for
FUNC.
example
).
Bottom view
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Getting to Know the Camcorder
Screen Displays
Recording
Zoom (
24), Exposure
(
34)
Recording program (
White balance (
Image effect (
Digital effects (
Condensation warning (
Exposure adjustment (
Manual focus (
Image stabilizer (
Recording mode (
Tape operation
Playback
Time code (hours : minutes : seconds)
Remaining tape
Remaining battery charge
Widescreen 16:9 mode (
Audio recording mode (
Backup battery warning
Level marker (
30)
Recording reminder
Operating mode (
9)
Audio playback mode (
Search function display
END SEARCH (
Playback time
(hours : minutes : seconds : frames)
Joystick guide (
Data code (
8)
39)
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Getting to Know the Camcorder
Tape operation
Remaining battery charge
Record,
Stop,
Record pause,
Eject,
Fast forward,
Playback,
Fast forward playback,
Rewind playback
Rewind,
Playback pause,
• When “
” starts flashing in red replace
the battery pack with a fully charged one.
• When you attach an empty battery pack,
the power may turn off without displaying
Remaining tape
Indicates the remaining time of the tape in
“
”.
• Depending on the conditions under which
the camcorder and the battery pack are
used, the actual battery charge may not be
indicated accurately.
minutes. “
When the tape reaches its end, the display
changes to “ END”.
” moves during recording.
• When the time left is less than 15
seconds, the remaining tape time may not
appear.
• Depending on the type of tape, the
remaining time displayed may not be
correct. In any case, you will be able to
record on the tape the number of minutes
that appears on the videocassette’s label
(for example, 85 minutes).
Backup battery warning
flashes in red when the lithium button
battery is not installed, or when it needs to
be replaced.
Recording reminder
The camcorder counts from 1 to 10
seconds when you start recording. This is
helpful to avoid scenes that are too short.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Getting Started
Preparations
Getting Started
1 Turn off the camcorder.
Getting Started
2 Attach the battery pack to the
camcorder.
• Press the battery pack lightly and
slide it down until it clicks.
Charging the Battery Pack
The camcorder can be powered with a
battery pack or directly using the compact
power adapter. Charge the battery pack
before use.
DC IN
terminal
CHARGE
indicator
Remove the battery
terminal cover before
attaching the battery
3 Plug the compact power adapter
into a power outlet.
4 Connect the compact power adapter
to the camcorder’s DC IN terminal.
BATT. switch
Charging, Recording and Playback Times
The times given in the table below are approximate and vary depending on the actual
charging, recording or playback conditions.
Battery Pack
BP-2L5
NB-2L
NB-2LH
BP-2L12
BP-2L14
Charging Time
145 min. 150 min. 160 min. 240 min. 285 min.
Maximum Recording Times
Viewfinder
105 min. 120 min. 145 min. 250 min. 305 min.
100 min. 120 min. 145 min. 245 min. 300 min.
LCD [NORMAL]
LCD [BRIGHT]
95 min.
110 min. 135 min. 230 min. 280 min.
Typical Recording Times*
Viewfinder
60 min.
55 min.
50 min.
65 min.
65 min.
60 min.
80 min.
80 min.
75 min.
135 min. 165 min.
130 min. 165 min.
125 min. 155 min.
LCD [NORMAL]
LCD [BRIGHT]
Playback Times
110 min. 125 min. 150 min. 265 min. 320 min.
* Approximate times for recording with repeated operations such as start/stop, zooming, power on/off.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Getting Started
Flashes approx. once per second: Battery less
than 50% charged.
• The CHARGE indicator starts
flashing. The indicator will stay on
when the charging is completed.
• You can also use the compact power
adapter without attaching a battery
pack.
ꢀThe charging time will vary depending on the
surrounding temperature and the battery pack’s
initial charge condition. In cold places, the
effective usage time of the battery will
decrease.
• When the compact power adapter is
connected, even if a battery is
attached its power will not be
consumed.
ꢀWe recommend that you prepare battery
packs 2 to 3 times longer than you think you
might need.
ꢀ
U.S.A. and Canada only: The lithium
ion/polymer battery that powers this
product is recyclable. Please call
1-800-8-BATTERY for information
on how to recycle this battery.
ONCE THE BATTERY IS FULLY CHARGED
1 Disconnect the compact power
adapter from the camcorder.
2 Unplug the compact power adapter
from the power outlet.
TO REMOVE THE BATTERY PACK
Installing the Backup Battery
The backup battery (lithium button battery
Press
to release the battery
BATT.
pack. Lift the battery pack and then
pull it out.
CR1616) allows the camcorder to retain the
date, time (
21) and other camcorder
settings while the power source is
disconnected. Connect a power source to
the camcorder when replacing the backup
battery to retain the settings.
IMPORTANT
ꢀYou may hear some noise from the compact
power adapter during use. This is not a
malfunction.
ꢀWe recommend charging the battery pack in
temperatures between 10 °C and 30 °C (50 °F
and 86 °F). Outside the temperature range of
0 °C to 40 °C (32 °F to 104 °F), the charging will
not start.
ꢀDo not connect to the camcorder’s DC IN
terminal or to the compact power adapter any
electrical equipment that is not expressly
recommended for use with this camcorder.
ꢀTo prevent equipment breakdowns and
excessive heating, do not connect the supplied
compact power adapter to voltage converters for
overseas travels or special power sources such
as those on aircraft and ships, DC-AC inverters,
etc.
NOTES
1 If a battery pack is attached, remove
it first.
2 Open the backup battery cover.
ꢀThe CHARGE indicator also serves as a
rough estimate of the battery charge status.
Continuously on: Battery fully charged.
Flashes approx. twice per second: Battery over
50% charged.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Getting Started
• To remove a cassette pull it straight
out.
3 Insert the backup battery with the
+ side facing out.
3 Press the
mark on the
cassette compartment until it clicks.
4 Close the cover.
NOTES
The backup battery has a life span of about a
year.
flashes in red to inform you that it
needs to be replaced.
4 Wait for the cassette compartment
to retract automatically and close
the cassette compartment cover.
Inserting and Removing a Tape
Use only videocassettes marked with the
logo.
IMPORTANT
ꢀDo not interfere with the cassette
compartment while it is opening or closing
automatically, or attempt to close the cover
before the cassette compartment has fully
retracted.
ꢀBe careful not to get your fingers caught in
the cassette compartment cover.
NOTES
If the camcorder is connected to a power
source, cassettes can be inserted/removed
even if the
switch is set to
.
OPEN/EJECT
1 Slide
fully in the
direction of the arrow and open the
cassette compartment cover.
The cassette compartment opens
automatically.
2 Insert the cassette.
• Insert the cassette with the window
facing the grip belt.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Getting Started
Preparing the Camcorder
Adjusting the LCD Screen
Rotating the LCD Panel
Open the LCD panel 90 degrees.
You can rotate the panel 90 degrees
downward.
180°
90°
You can rotate the panel 180 degrees
toward the lens (allowing the subject to
monitor the LCD screen while you use the
viewfinder). Rotating the panel 180
degrees is also useful if you wish to
include yourself when recording with the
self timer.
1 Turn on the camcorder.
2 Move the lens cover switch down to
to open the lens cover.
3 Adjust the viewfinder.
Keep the LCD panel closed to use the
viewfinder and adjust the dioptric
adjustment lever as necessary.
4 Fasten the grip belt.
Adjust the grip belt so that you can
reach the zoom lever with your index
finger, and the start/stop button with
your thumb.
Subject can monitor the
LCD screen
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Using the Menus
Using the Menus
LCD Backlight
You can set the brightness of the LCD
screen at normal or bright.
Using the Menus
Many of the camcorder’s functions can be
adjusted from the menus that open after
FUNC.
pressing the FUNC. button (
For details about the available menu
).
FUNC.
options and settings, refer to Menu
Options Lists (
FUNC.
1 Press
2 Select (
.
) the
icon and press
(
) to open the setup menus.
3 Select (
] and press (
) [
DISPLAY SETUP/
).
Selecting a FUNC. Menu Option
4 Select (
press (
) [BACKLIGHT] and
).
) the desired option and
).
5 Select (
press (
FUNC.
6 Press
to close the menu.
NOTES
ꢀThis setting does not affect the brightness of
the recording or the viewfinder screen.
ꢀUsing the [BRIGHT] setting will shorten the
effective usage time of the battery pack.
FUNC.
1 Press
.
2 Select (
) the icon of the function
you want to change from the left
side column.
3 Select (
) the desired setting from
the available options at the bottom
bar.
The selected option will be highlighted
in light blue. Menu items not available
will appear grayed out.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Using the Menus
FUNC.
4 Press
to save the settings
The title of the selected menu appears
on top of the screen and under it the
list of settings.
and close the menu.
FUNC.
• You can press
menu at any time.
• With some settings you will need to
press ( ) and make further
selections. Follow the additional
operation guides that will appear on
the screen (such as the joystick
icon , small arrows, etc.).
to close the
4 Select (
) the setting you want to
change and press (
).
• An orange frame will indicate the
menu item currently selected. Menu
items not available will appear grayed
out.
• To return to the menu selection
screen, select ( ) [ RETURN] and
press (
5 Select (
press (
).
) the desired option and
) to save the setting.
Selecting an Option from the Setup
Menus
6 Press
.
FUNC.
FUNC.
You can press
to close the
menu at any time.
FUNC.
1 Press
.
2 Select (
) the
icon and press
(
) to open the setup menus.
FUNC.
You can also hold
pressed
down for more than 2 seconds to open
directly the setup menus screen.
3 Select (
) the desired menu from
).
the left side column and press (
Download from Www.Somanuals.com. All Manuals Search And Download.
21
First Time Settings
First Time Settings
First Time Settings
Changing the Time Zone
Default value
Changing the Language
DATE/TIME SETUP
The language for on-screen and menu
displays can be changed. The list of
available languages depends on the
region where you purchased the
camcorder.
T.ZONE/DST NEW YORK
Language Set A
English, German, Spanish, French, Italian, Polish,
Russian, Simplified Chinese and Japanese.
FUNC.
Language Set B
English, Simplified Chinese, Traditional Chinese
and Korean.
FUNC.
1 Press
.
2 Select (
) the
icon and press
(
) to open the setup menus.
3 Select ( ) [DATE/TIME SETUP]
and press ( ).
Default value
DISPLAY SETUP/
4 Select (
press (
) [T.ZONE/DST] and
).
The time zone setting appears. The
default setting is New York or
Singapore, depending on the region of
purchase.
LANGUAGE ENGLISH
5 Select (
press (
To adjust for daylight saving time,
) your time zone and
).
FUNC.
1 Press
.
FUNC.
select the time zone with the
next to the area.
mark
2 Select (
) the
icon and press
(
) to open the setup menus.
6 Press
to close the menu.
FUNC.
3 Select (
and press (
4 Select (
).
) [DISPLAY SETUP/
]
Time Zones
).
) [LANGUAGE] and press
) the desired option and
Once you have set the time zone, date
and time, you do not need to reset the
clock every time you travel to another
time zone. Select the time zone referring
to the date and time displayed on the
screen.
(
5 Select (
press (
6 Press
).
to close the menu.
FUNC.
NOTES
ꢀIf you changed the language by mistake,
follow the mark next to the menu item to
change the setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
First Time Settings
Setting the Date and Time
DATE/TIME SETUP
DATE/TIME JAN. 1, 2007 12:00 AM
FUNC.
FUNC.
1 Press
2 Select (
.
) the
icon and press
(
) to open the setup menus.
3 Select (
and press (
4 Select (
).
) [DATE/TIME SETUP]
).
) [DATE/TIME] and press
(
Blinking arrows will be displayed
around the first field of the date.
5 Change each field of the date and
time with the joystick’s (
move ( ) to the next field.
) and
6 Press ( ) to start the clock.
7 Press
to close the menu.
FUNC.
NOTES
You can also change the date format (
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Recording
Basic Functions
Recording
TO REVIEW THE LAST SCENE RECORDED
Recording
Recording Movies
Before You Begin Recording
Make a test recording first to check if the
camcorder operates correctly. If
necessary, clean the video heads (
2).
(
9)
EXP
FOCUS
1 Set the mode switch to
.
2 If the joystick guide does not appear
on screen, press (
3 Push the joystick ( ) momentarily
towards and release it.
) to display it.
• The camcorder will play back a few
seconds of the last recording made
and return to record pause mode.
• You can also hold the joystick
pressed ( ) towards
towards to play back the tape
(reverse or forward respectively) to
locate the point where you want to start
recording.
or (
)
1 Move the lens cover switch down to
to open the lens cover.
2 Holding the lock button pressed
down, set the
CAMERA.
Start/Stop
switch to
WHEN YOU HAVE FINISHED RECORDING
Close the lens cover and the LCD
3 Press
to begin recording.
again to pause the
1
Start/Stop
Press
recording.
panel
.
2 Turn off the camcorder.
3 Remove the tape.
4 Disconnect the power source and
remove the battery pack.
NOTES
ꢀ
About the recording time: By changing the
recording mode you can change the video
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Recording
quality and as a result, also the available
ꢀPrevious recordings overwritten by a new
recording cannot be recovered. Before you start
recording, search for the end of the last
Zooming
POINTS TO CHECK
recording (
ꢀTo protect the tape and video heads, the
camcorder will enter the stop mode ( ) if left in
(
9)
: In addition to the 35x optical
zoom, the digital zoom (up to 1000x) is
record pause (
) mode for 4 minutes 30
seconds. To resume recording press Start/Stop
ꢀWhen recording in very loud places (such as
fireworks shows or concerts), sound may
become distorted or it may not be recorded at
the actual levels. This is not a malfunction.
.
Zoom out
ꢀ
About the Power Save mode: To save power
when the camcorder is powered by a battery
pack, the camcorder will automatically shut off if
left without any operations for 5 minutes
(
camcorder off and then on again.
ꢀ
About the LCD and viewfinder screen: The
screens are produced using extremely high-
precision manufacturing techniques, with more
than 99.99% of the pixels operating to
specification. Less than 0.01% of the pixels
may occasionally misfire or appear as black,
red, blue or green dots. This has no effect on
the recorded image and does not constitute a
malfunction.
Zoom in
35x Optical Zoom
Move the zoom lever toward W to
zoom out (wide-angle). Move it toward
T to zoom in (telephoto).
ꢀ
When using a tripod: Do not
leave the viewfinder exposed to
direct sunlight as it may melt
(due to concentration of the light
by the lens). Do not use tripods
with fastening screws longer
than 5.5 mm (0.2 inch). Doing
so may damage the camcorder.
You can also change the zoom speed
(
zoom speeds or a variable speed that
depends on how you operate the zoom
lever: Press gently for a slow zoom; press
harder for faster zooms.
ꢀ
When recording movies, try to get a calm, stable
picture.
Excessive camcorder movement while shooting
and extensive use of fast zooms and panning
can result in fidgety, jittery scenes. In extreme
cases the playback of such scenes may result
in visually induced motion sickness. If you
experience such a reaction, immediately stop
the playback and take a rest break as
necessary.
NOTES
ꢀWhen set to [VARIABLE], the zoom speed will
be faster in the record pause mode.
ꢀKeep at least 1 m (3.3 ft.) to the subject. At
wide-angle, you can focus on a subject as close
as 1 cm (0.39 in.).
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Playback
Playback
DURING PLAYBACK
Playback
5 Push the joystick ( ) towards
/
again to pause the playback.
6 Push the joystick ( ) towards
stop the playback.
to
Playing Back Movies
Play back the tape on the LCD display or
close the LCD panel to use the
viewfinder. You can also turn the LCD
panel and close it with the screen facing
out.
TO ADJUST THE VOLUME
FUNC.
1 Press
.
2 Select (
) [
SPEAKER
VOLUME] and adjust (
volume.
) the
(
9)
• The sound from the built-in speaker
will be muted when you close the LCD
panel or while the STV-250N Stereo
Video Cable is connected to the AV
terminal.
• If you turn off the volume completely,
the icon will change to
.
FUNC.
3 Press
to close the menu.
SPECIAL PLAYBACK MODES
There is no sound during the special
playback modes.
ꢀ
Fast Playback: Push the joystick (
)
towards or ( ) towards
. Hold
the joystick pressed down to rewind/fast
forward the tape while continuing the
playback.
1 Holding the lock button pressed
NOTES
down, set the
PLAY.
switch to
ꢀYou can display the date and time of the
2 If the joystick guide does not
appear on screen, press ( ) to
display it.
3 Locate the point where you want to
begin the playback.
recording (
ꢀDuring some special playback modes, you
may notice some video problems (blocky video
artifacts, banding, etc.) in the playback picture.
ꢀTo protect the tape and video heads, the
camcorder will enter the stop mode ( ) if left in
playback pause (
seconds. To resume the playback push the
joystick ( ) towards
Push the joystick ( ) towards
rewind the tape or ( ) towards
to fast forward.
to
) mode for 4 minutes 30
/
.
4 Push the joystick ( ) towards
to begin the playback.
/
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Playback
Locating the End of the Last Scene
Magnifying the Playback Image
After playing back a tape, use this
function to locate the end of the last
scene recorded in order to continue
recording from that point.
During playback, movies and still images
can be magnified up to 5 times. You can
also select the area to be magnified.
(
9)
POINTS TO CHECK
Stop the playback before using this
function.
FUNC.
FUNC.
1 Press
.
2 Select (
) [
).
END SEARCH] and
press (
3 Select (
) [EXECUTE] and press
(
).
• “END SEARCH” appears.
• The camcorder rewinds/fast forwards
the tape, plays back the last few
seconds of the recording and stops the
tape.
1 Move the zoom lever toward T.
• The image is magnified by 2 times
and a frame appears indicating the
position of the magnified area.
• To further enlarge the image, move
the zoom lever toward T. To reduce the
magnification, move the zoom lever
toward W.
• To cancel the search push the
joystick ( ) towards
.
NOTES
ꢀEnd search cannot be used once you remove
the cassette.
ꢀIf there are blank sections between
recordings, the end search may not work
correctly.
•
will appear for images that cannot
be enlarged.
2 Select (
,
) the enlarged area
of the picture with the joystick.
To cancel the magnification, move the
zoom lever toward W until the frame
disappears.
IMPORTANT
While the magnification position frame is
displayed, it will replace the joystick guide. Cancel
the magnification to return to normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Menu Options Lists
(
Advanced Functions
Menu Options Lists
SPEAKER VOLUME
Menu Options Lists
Menu items not available appear grayed
out. For details about how to select an
item, refer to Using the Menus (
19).
Adjust (
) the volume with the joystick.
(
REC PAUSE
FUNC. Menu
(
Recording programs
Press (
mode.
) to enter the record pause
(
END SEARCH
Mode switch:
[
[
[
[
PROGRAM AE],[ PORTRAIT],
SPORTS], [ NIGHT], [ SNOW],
BEACH], [ SUNSET],
Press (
) to search.
SPOTLIGHT], [ FIREWORKS]
(
White balance
Setup menus
Camera Setup (Digital Zoom, Image Stabilizer, etc.)
CAMERA SETUP
Mode switch:
(
[
[
AUTO], [ DAYLIGHT],
TUNGSTEN], [ SET]
SHUTTER
(
Image effect
Mode switch:
Recording program: [ PROGRAM AE]
[
AUTO], [1/60], [1/100], [1/250],
Mode switch:
[1/500], [1/1000] [1/2000]
[
[
[
IMAGE EFFECT OFF], [ VIVID],
NEUTRAL],
SOFT SKIN DETAIL]
A.SL SHUTTER
(
Digital effects
[
ON], [
OFF]
The camcorder automatically uses slow
shutter speeds to obtain brighter
recordings in places with insufficient
lighting.
ꢀThe camcorder uses shutter speeds
down to 1/30.
Mode switch:
[
D.EFFECT OFF], [ FADER],
[
EFFECT]
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Menu Options Lists
ꢀIf a trailing afterimage appears, set the
IMG STAB
slow shutter to [
OFF].
D.ZOOM
Mode switch:
[
ON], [
OFF]
The image stabilizer compensates for
camcorder shake even at full telephoto.
ꢀThe image stabilizer is designed to
compensate for a normal degree of
camcorder shake.
[
OFF], [
105X], [
1000X]
Determines the operation of the digital
zoom.
ꢀWhen activated, the camcorder will
switch automatically to the digital zoom
when you zoom in beyond the optical
zoom range.
ꢀWith the digital zoom the image is
digitally processed, so the image
resolution will deteriorate the more you
zoom in.
ꢀThe digital zoom indicator will appear in
light blue from 35x up to 105x and dark
blue from 105x up to 1000x.
ꢀThe image stabilizer may not be
effective when recording in dark places
using the [
NIGHT] recording program.
ꢀThe image stabilizer cannot be turned
off when the mode switch is set to
.
ꢀWe recommend setting the image
stabilizer to [
tripod.
OFF] when using a
WIDESCREEN
ꢀThe digital zoom cannot be used with
the [
NIGHT] recording program.
ZOOM SPEED
[
ON], [
OFF]
The camcorder uses the full width of the
CCD providing high-resolution 16:9
recording.
ꢀSince the displays on the camcorder
have an aspect ratio of 16:9, recordings
with a 4:3 aspect ratio will appear in the
center of the screen with black sidebars.
[
[
VARIABLE], [
SPEED 2], [
SPEED 3],
SPEED 1]
VARIABLE] the zoom
ꢀWhen set to [
speed depends on how you operate the
zoom lever: Press lightly for a slow zoom;
press harder for faster zooms.
ꢀThe fastest zoom speed can be
achieved with [
the fixed zoom speeds, [
the fastest and [
slowest.
ꢀ
Playing back a widescreen recording: TV
sets compatible with the Video ID-1
system will automatically switch to wide
(16:9) mode. Otherwise, change the
aspect ratio of the TV manually. To play
back on a TV with normal aspect ratio
(4:3) change the [TV TYPE] setting
VARIABLE]. Among
SPEED 3] is
SPEED 1] the
accordingly (
(
SELF TIMER
[
ON], [
OFF]
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Menu Options Lists
VCR Setup (Recording Mode, TV Type, etc.)
AUDIO SETUP
OUTPUT CH
VCR SETUP
REC MODE
(
[
L/R], [
L/L], [
R/R]
[
STD PLAY], [
LONG PLAY]
ꢀRecording in LP mode extends the
available recording time on the tape 1.5
times.
WIND SCREEN
ꢀDepending on the condition of the tape
(long usage, imperfections, etc.) you may
notice some video problems (blocky video
artifacts, banding, etc.) in the playback
picture when playing back recordings
made in LP mode. We recommend using
the SP mode for important recordings.
ꢀIf you make recordings in both SP and
LP modes on the same tape, during
playback you may notice some video
problems in the picture at the point where
the recording mode changes.
Mode switch:
AUTO], [
The camcorder automatically reduces the
background sound of wind when
recording outdoors.
[
OFF
]
ꢀThe wind screen cannot be turned off
when the mode switch is set to
.
(
12bit AUDIO
ꢀWhen playing back in this camcorder
tapes recorded in LP mode with other
devices or vice versa, you may notice
some problems in the playback picture or
the sound may stop briefly.
[
[
STEREO1], [
MIX/FIXED], [
STEREO2],
MIX/VAR.]
(
MIX BALANCE
TV TYPE
When [12bit AUDIO] is set to [
MIX/
[
NORMAL TV], [
WIDE TV]
VAR.], adjust (
) the sound balance
In order to display the picture in full and in
the correct aspect ratio, select the setting
according to the type of television to
which you will connect the camcorder.
[NORMAL TV]: TV sets with 4:3 aspect
ratio.
with the joystick.
ꢀThe camcorder will retain the audio
balance adjustment, however if you turn
off the camcorder, [12bit AUDIO] will be
reset to [
STEREO1].
[WIDE TV]: TV sets with 16:9 aspect
ratio.
AUDIO MODE
Audio Setup (Audio Mode, Wind Screen, etc.)
[
16bit], [
12bit]
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Menu Options Lists
Display Setup (LCD Brightness, Language, etc.)
MARKERS
DISPLAY SETUP
BRIGHTNESS
[
[
[
OFF], [
LEVEL(GRY)], [
GRID(GRY)]
LEVEL(WHT)],
GRID(WHT)],
Adjust (
) the brightness of the LCD
You can display a grid or a horizontal line
at the center of the screen. The markers
are available in white or gray. Use the
markers as a reference to make sure your
subject is framed correctly (vertically and/
or horizontally).
display with the joystick.
ꢀChanging the brightness of the LCD
display does not affect that of the
viewfinder or the recordings.
(
BACKLIGHT
ꢀUsing the markers will not affect the
recordings on the tape.
DISPLAYS
[
NORMAL]*, [
BRIGHT]
BRIGHT]
* The default setting is [
when you power the camcorder using the
compact power adapter.
[
ON], [
OFF<PLAYBK>]
You can hide the on-screen displays to
show only the playback picture on the full
screen.
TV SCREEN
ꢀTape operation displays appear for 2
seconds.
ꢀWarning messages and the data code
(if activated) will appear, even when set to
[
ON], [
ON], [
OFF]
[
OFF<PLAYBK>].
ꢀAll on-screen displays will appear while
the playback image is magnified or a
digital effect is activated.
[
OFF]
When set to [
ON], the camcorder’s
on-screen displays will appear also on the
screen of a connected TV or monitor.
When the date and time are displayed on
the camcorder’s screen they will also
appear on a connected TV regardless of
the [TV SCREEN] setting. Turn off the
date/time display with the [DATA CODE]
6SEC.DATE
[
ON], [
OFF]
When you start playing back a tape or
when the date of the recording changes,
the date and time will be displayed for 6
seconds.
setting (
31).
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Menu Options Lists
System Setup (Beep, etc.)
(
(
DATA CODE
SYSTEM SETUP
BEEP
[
[
OFF], [ DATE], [ TIME],
DATE & TIME]
[
[
HIGH VOLUME],
LOW VOLUME], [
LANGUAGE
OFF]
A beep will accompany some operations
like turning on the camcorder, the self-
timer countdown, etc. It also serves as a
warning beep under unusual conditions.
The list of available languages depends
on the region where you purchased the
camcorder.
POWER SAVE
Language Set A:
[DEUTSCH], [ENGLISH], [ESPAÑOL],
[FRANÇAIS], [ITALIANO], [POLSKI],
[
], [
], [
]
[
ON], [
OFF]
Language Set B:
[ENGLISH], [
In order to save power when the
], [
], [
]
camcorder is powered by a battery pack,
it will automatically shut off if left without
any operation for five minutes.
Approximately 30 seconds before the
camcorder shuts off, the message
DEMO MODE
“
AUTO POWER OFF” will appear.
[
ON], [
OFF]
Date/Time Setup
The demonstration mode displays the
camcorder’s main features. It starts
automatically when the camcorder is
powered with the power adapter if you
leave it turned on without loading a
recording media for more than 5 minutes.
ꢀTo cancel the demo mode once it
started, press any button, turn off the
camcorder or insert a videocassette.
DATE/TIME SETUP
(
(
T.ZONE/DST
DATE/TIME
DATE FORMAT
[Y.M.D (2007.1.1 AM 12:00)],
[M.D,Y (JAN. 1, 2007 12:00 AM)],
[D.M.Y (1.JAN.2007 12:00 AM)]
Changes the date format for on-screen
displays.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Recording Programs
Recording Programs
Using the Recording Programs
Easy Recording
The camcorder adjusts the focus,
exposure and other settings
automatically, allowing you to just
point and shoot.
:
Recording Programs (
[
PROGRAM AE]
[
NIGHT]
[
SUNSET]
The camcorder sets the
Use this mode to record
Use this mode to record
sunsets in vibrant colors.
aperture and shutter speed. in low-light conditions.
[
PORTRAIT]
[
SNOW]
[
SPOTLIGHT]
The camcorder uses a
Use this mode to record
Use this mode to record
spotlit scenes.
large aperture, achieving a in bright ski resorts. It
focus on the subject while
blurring other distracting
details.
prevents the subject from
being underexposed.
[
SPORTS]
[
BEACH]
[
FIREWORKS]
Use this mode to record
sports scenes such as
tennis or golf.
Use this mode to record
on a sunny beach. It
Use this mode to record
fireworks.
prevents the subject from
being underexposed.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Recording Programs
Shutter speed guidelines
: Changing the Shutter Speed and
Special Scene Programs
Use the automatic exposure (AE)
program to set the shutter speed or select
one of the special scene recording
programs.
1/60
For general recordings.
1/100
For recording indoor sports scenes.
1/250, 1/500, 1/1000
For recording from within a car or train, or
for recording moving subjects such as
roller coasters.
POINTS TO CHECK
(
9)
1/2000
Mode switch:
For recording outdoor sports such as golf
or tennis on sunny days.
Note that on screen only the denominator
is displayed – “ 250” indicates a shutter
speed of 1/250, etc.
FUNC.
Icon of the currently selected
Recording Program
NOTES
FUNC.
ꢀDo not change the position of the mode
switch while recording as the brightness of the
image may change abruptly.
FUNC.
Desired option
ꢀ[ PROGRAM AE]
- When setting the shutter speed, the number
displayed will flash if the value selected is not
appropriate for the recording conditions. In such
case, select a different value.
- If you use a slow shutter speed in dark places,
you can obtain a brighter image, but the image
quality may be lower, and the autofocus may
not work well.
TO SET THE SHUTTER SPEED IN THE
[
PROGRAM AE] RECORDING PROGRAM
FUNC.
MENU
CAMERA SETUP
SHUTTER
- The image may flicker when recording with
high shutter speeds.
-
Recording movies under fluorescent lights: If the
screen starts to flicker, select [ PROGRAM
AE] and set the shutter speed to 1/100.
FUNC.
Desired option
- The shutter speed resets to [
you set the mode switch to
recording program.
AUTO] when
or change the
ꢀ[
[
PORTRAIT]/[
SNOW]
SPORTS]/[
BEACH]/
- The picture may not appear smooth during
playback.
ꢀ[ PORTRAIT]
- The blur effect of the background increases
the more you zoom in (T).
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Adjusting the Picture: Exposure, Focus and Color
Adjusting the Picture: Exposure, Focus and Color
ꢀ[
NIGHT]
Adjusting the Picture:
- Moving subjects may leave a trailing
afterimage.
- Picture quality may not be as good as in other
modes.
Exposure, Focus and Color
- White points may appear on the screen.
- Autofocus may not work as well as in other
modes. In such case, adjust the focus manually.
Manual Exposure Adjustment
At times, backlit subjects may appear too
dark (underexposed) or subjects under
very strong lights may appear too bright
or glaring (overexposed). To correct this,
you can manually adjust the exposure.
ꢀ[ SNOW]/[ BEACH]
- The subject may become overexposed on
cloudy days or in shaded places. Check the
image on the screen.
ꢀ[ FIREWORKS]
To avoid camcorder shake, we recommend
using a tripod.
POINTS TO CHECK
(
9)
(except for the
FIREWORKS] recording program).
Mode switch:
[
EXP
BACK
1 If the joystick guide does not appear
on screen, press ( ) to display it.
2 Push the joystick ( ) towards
[EXP].
• [EXP] on the joystick guide changes
to light blue and the exposure
adjustment indicator
and the
neutral value “±0” appear on the
screen.
• If you operate the zoom during
exposure lock, the brightness of the
image may change.
3 Adjust (
) the brightness of the
image as required.
• The adjustment range and the length
of the exposure adjustment indicator
will vary depending on the initial
brightness of the picture.
• Pushing the joystick ( ) towards
[EXP] again will return the camcorder
to automatic exposure.
4
Push the joystick ( ) towards
[BACK] to save the exposure setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Adjusting the Picture: Exposure, Focus and Color
4 Adjust (
necessary.
• Push the joystick ( ) towards
a farther focal distance or push it (
) the focus as
Manual Focus Adjustment
for
)
Autofocus may not work well on the
following subjects. In such case, focus
manually.
towards
for a closer focal distance.
• Pushing the joystick ( ) towards
[FOCUS] again will return the
camcorder to autofocus.
Reflective surfaces
5 Push the joystick ( ) towards
[BACK] to save the focus
adjustment.
Subjects with low contrast or
without vertical lines
NOTES
Fast moving subjects
The camcorder will automatically return to
autofocus when you set the mode switch to
.
Through wet windows
Night scenes
Infinity Focus
Use this function when you wish to focus
on faraway subjects such as mountains or
fireworks.
BACK
POINTS TO CHECK
FOCUS
(
9)
1 Adjust the zoom.
2 Keep the joystick pushed (
)
Mode switch:
towards [FOCUS] for more than 2
seconds.
BACK
•
appears.
• Pushing the joystick ( ) towards
[FOCUS] again will return the
camcorder to autofocus.
FOCUS
1 Adjust the zoom.
2 If the joystick guide does not appear
on screen, press ( ) to display it.
3 Push the joystick ( ) towards
[FOCUS] to activate the manual
focus.
• Operating the zoom or the joystick
(
) will return the camcorder to
manual focus adjustment.
3 Push the joystick ( ) towards
[BACK] to save the focus
adjustment.
[FOCUS] on the joystick guide will be
displayed in light blue and “MF”
appears on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Adjusting the Picture: Exposure, Focus and Color
TO SET THE CUSTOM WHITE BALANCE
White Balance
1 Point the camcorder at a white
The white balance function helps you
accurately reproduce colors under
different lighting conditions so that white
objects will always look truly white in your
recordings.
object, zoom in until it fills the
whole screen and press (
).
When the adjustment is completed,
stops flashing and stays on. The
camcorder retains the custom setting
even if you turn off the camcorder.
FUNC.
POINTS TO CHECK
2 Press
to save the setting and
close the menu.
(
9)
NOTES
Mode switch:
ꢀWhen you select the custom white balance
Options
Default value
[
SET]:
- Make the white balance adjustment in a place
with sufficient light.
[
AUTO]
Settings are automatically set by the
camcorder. Use this setting for outdoor
scenes.
- Set [D.ZOOM] to [
OFF] (
- Readjust the white balance if the lighting
conditions change.
- Very rarely and depending on the light source,
may keep on flashing instead of staying on.
Even in that case, the white balance would be
properly adjusted and the results should be
[
DAYLIGHT]
For recording outdoors on a bright day.
TUNGSTEN]
[
better than with [
AUTO].
For recording under tungsten and tungsten
type (3-wavelength) fluorescent lighting.
ꢀCustom white balance may provide better
results in the following cases:
- Changing lighting conditions
- Close-ups
[
SET]
Use the custom white balance for special
situations not covered by the other options.
The custom white balance will ensure that
white subjects appear white under various
lighting conditions.
- Subjects in a single color (sky, sea or forest)
- Under mercury lamps and certain types of
fluorescent lights
FUNC.
Icon of the currently selected
White Balance
FUNC.
FUNC.
Desired option*
* When you select [ SET], do not press
FUNC.
and continue instead with the
procedure below.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Audio Recording and Playback
Audio Recording and Playback
Audio Recording and
Playback
Image Effects
You can use the image effects to change
the color saturation and contrast to obtain
different results.
Audio Recording Mode
You can change the quality of the audio
recording.
POINTS TO CHECK
(
9)
POINTS TO CHECK
Mode switch:
(
9)
Options
Default value
Options
[
IMAGE EFFECT OFF]
Default value
Records with no image enhancing effects.
VIVID]
[
16bit]
[
Records audio at the highest quality.
Emphasizes the contrast and color
saturation.
[
12bit]
Records audio on 2 channels (Stereo 1)
leaving 2 channels free (Stereo 2) for
audio dubbing or for adding a sound
track with an external device. Audio
dubbing cannot be performed with this
camcorder.
[
NEUTRAL]
Tones down the contrast and color
saturation.
[
SOFT SKIN DETAIL]
Softens the details in the skin tone area for
a more complimentary appearance.
FUNC.
FUNC.
FUNC.
MENU
Icon of the currently selected
Image Effect
FUNC.
AUDIO SETUP
AUDIO MODE
Desired option
FUNC.
Desired option
FUNC.
ABOUT THE WIND SCREEN
When using the built-in microphone, the
camcorder automatically reduces the
background sound of wind, but you can
turn the wind screen off when you want
the microphone to be as sensitive as
possible (
29).
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Audio Recording and Playback
TO USE AN EXTERNAL MICROPHONE
[
R/R]
Right channel only (stereo) / Sub signal
only (bilingual).
FUNC.
FUNC.
MENU
AUDIO SETUP
OUTPUT CH
Desired option
Connect the external microphone to the
MIC terminal. Use commercially available
condenser microphones with their own
power supply and a cable no longer than
3 m. You can connect almost any stereo
microphone with a ∅ 3.5 mm plug but the
audio recording levels may vary.
FUNC.
Selecting the Audio Track on a Tape with
Dubbed Audio
You can select the audio track to play
back when playing back a tape that has a
dubbed audio track (Stereo 2) in addition
to the original recorded audio (Stereo 1).
Audio Playback Modes
POINTS TO CHECK
Selecting the Audio Channel
You can select the audio channel to play
back when playing back a tape with audio
recorded on two channels (either stereo
sound or bilingual audio signals).
(
9)
Options
Default value
[
STEREO1]
Original sound only.
STEREO2]
Dubbed audio only.
MIX/FIXED]
POINTS TO CHECK
[
(
9)
Options
Default value
[
[
L/R]
Mixed audio with the original sound and
the dubbed audio at the same level.
Left and Right channels (stereo) / Main +
Sub signals (bilingual).
[
MIX/VAR.]
Mixed audio where the balance between
the original sound ( ) and the dubbed
audio ( ) can be adjusted.
[
L/L]
Left channel only (stereo) / Main signal
only (bilingual).
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Other Functions
Other Functions
Other Functions
Data Code
The camcorder keeps a data code
FUNC.
MENU
containing the date and time of recording.
You can select the data to be displayed.
AUDIO SETUP
12bit AUDIO
Desired option*
Options
Default value
FUNC.
[
OFF]
* When you select [
mix balance with the [MIX BALANCE] setting
MIX/VAR.], adjust the
No data code display.
DATE], [ TIME]
(
[
Displays the date or time when the scene
or still image was recorded.
[
DATE & TIME]
Displays both the date and time of the
recording.
FUNC.
FUNC.
MENU
DISPLAY SETUP/
DATA CODE
FUNC.
Desired option
Self Timer
POINTS TO CHECK
(
9)
Set the camcorder in record pause mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Other Functions
[
EFFECT] Effects
Add flavor to your recordings. Sound will
be recorded normally. You can preview
the effect on the display.
FUNC.
MENU
CAMERA SETUP
SELF TIMER
ON
[BLK&WHT]
(black and white)
[SEPIA]
[ART]
[MOSAIC]
[CUBE]
[BALL]
[WAVE]
[COLOR M.]
(color mask)
[MIRROR]
FUNC.
•
appears.
POINTS TO CHECK
• Set [SELF TIMER] to [
cancel the self timer.
OFF] to
(
9)
Start/Stop
Press
.
Mode switch:
The camcorder starts recording after a
10-second countdown. The countdown
appears on the screen.
Default value
D.EFFECT OFF
NOTES
FUNC.
Once the countdown has begun, you can also
Start/Stop
press
to cancel the self timer. The
self timer will also be canceled if you turn off the
camcorder.
Setting
Icon of the currently selected
Digital Effect
FUNC.
Digital Effects
FADER
or
[
FADER] Faders
Begin or end scenes with a fade to or
from black. You can preview the effect on
the display.
EFFECT
FUNC.
**
Desired fader/effect*
[FADE-T]
(fade trigger)
[WIPE]
[JUMP]
* You can preview the effect on the screen
before pressing ( ).
** The icon of the selected effect appears.
[CORNER]
(corner wipe)
[FLIP]
[PUZZLE]
[BEAM]
[ZIGZAG]
[TIDE]
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Other Functions
Applying
NOTES
ꢀWhen you are not using the digital effect,
select [ D.EFFECT OFF].
ꢀThe camcorder retains the setting last used
even if you turn off the digital effects or change
the recording program.
ꢀThe digital effects are not available when [TV
TYPE] is set to [NORMAL TV] and the stereo
video cable is connected to the AV terminal.
D.EFFECTS
1 Press
to activate the
fader/effect.
• The icon of the selected effect turns
green.
D.EFFECTS
• Press
again to deactivate
the fader/effect.
T
O
FADE
IN
D.EFFECTS
Press
...
: ...in record pause mode, then
Start/Stop
press
to start recording with a
fade in.
: ...in playback pause mode,
then push the joystick ( ) towards
to fade in and start the playback.
/
T
O
FADE OUT
D.EFFECTS
Press
...
: ...while recording, then press
to fade out and pause the
Start/Stop
recording.
: ...during playback, then push
the joystick ( ) towards
and pause the playback.
/
to fade out
T
O
ACTIVATE AN EFFECT
D.EFFECTS
Press
...
: ...while recording or in record
pause mode.
: ...during playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Connecting to a TV or VCR
External Connections
Connecting to
a
TV or VCR
Connecting to a TV or VCR
Connection Diagrams
Turn off all the devices when making the connections and refer also to the instruction
manual of the connected device.
AV Terminal
DV Terminal
Check the type and orientation
of the terminal and make sure
you connect the DV cable
properly.
Open the terminal
cover to access.
Terminal on the Connected
Terminal on the Camcorder
Connecting Cable
Device
1
Output connection (Signal Flow ) to a TV or VCR with AV Terminals.
Yellow
VIDEO
AUDIO
L
White
STV-250N Stereo Video Cable
(Supplied)
Red
R
2
Output connection (Signal Flow ) to an HDTV with a DV (IEEE1394) terminal.
Input connection (Signal Flow ) from a TV or other digital video source with a DV
(IEEE1394) output.
4-pin
DV Cable
(Commercially available)
6-pin*
* Be careful to correctly insert the 6-pin plug into the DV terminal. Inserting it in the wrong direction
can result in damage to the camcorder.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Connecting to a TV or VCR
virtually no generation loss in video and
sound quality.
Playback on a TV Screen
Connect the camcorder to the external
device following one of the connection
diagrams shown in the previous section
The quality of the playback picture will
vary depending on the connected TV and
the type of connection used.
Connection Diagrams (
(
9)
(
9)
Before making the connections, select the
[TV TYPE] setting according to the TV set
to which you will connect the camcorder
Connecting
Connect the camcorder to a VCR or other
analog device using connection type
or to a DVD recorder or other digital
recording device using connection type
(
1
,
Connecting
Connect the camcorder to the TV
2
, as shown in the previous section
following one of the connection diagrams
shown in the previous section Connection
Recording
Diagrams (
1 This camcorder: Load the recorded
cassette.
Playback
1 Turn on the camcorder and the
connected TV or VCR.
2 Connected device: Load a blank
cassette or disc and set the device
to record pause mode.
3 This camcorder: Locate the scene
you wish to copy and pause the
playback shortly before the scene.
4 This camcorder: Resume the movie
playback.
On a TV: Set the input selector to
VIDEO. On a VCR: Set the input
selector to LINE (IN).
2 Start the playback of the movies
(
When using an analog connection you
can include in the copy also the date/
5 Connected device: Begin recording
when the scene you wish to copy
appears. Stop recording when
copying is complete.
NOTES
ꢀTurn off all the devices before starting the
connections.
ꢀWe recommend powering the camcorder
using the compact power adapter.
6 This camcorder: Stop playback.
Recording to a VCR or Digital Video
Recorder
NOTES
ꢀWe recommend powering the camcorder
using the compact power adapter.
ꢀWhen recording to a VCR using an analog
connection –connection type
quality of the edited tape will be lower than the
original.
You can copy your recordings by
connecting the camcorder to a VCR or a
digital video device. When recording to a
digital video recorder using the DV
terminal, you can copy recordings with
1
(
42)–, the
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Connecting to a TV or VCR
ꢀWhen recording to a digital video recorder
2
using the DV terminal –connection type
(
- If the picture does not appear, disconnect the
DV cable and restore the connection after a
short while or turn the camcorder off and then
on again.
- Proper operation cannot be guaranteed for all
digital devices equipped with a DV terminal. If
the operation does not work, use the AV
terminal.
6 When the scene you wish to record
appears, push the joystick (
towards to begin recording.
)
/
Recording starts.
7 While recording, push the joystick
(
) towards
recording.
In record pause, push the joystick (
/
to pause the
)
towards
recording.
/
again to resume
Digital Video Dubbing
You can input video from other digital
video devices and record the input video
on the tape in the camcorder.
8 Push the joystick ( ) towards
stop recording.
to
9
Connected device: Stop the playback.
(
9)
IMPORTANT
Connecting
Connect the camcorder to the video input
source using the digital connection
–connection type
the previous section Connection
Diagrams.
ꢀBlank sections may be recorded as
anomalous picture.
ꢀ
If the picture does not appear, disconnect the
DV cable and restore the connection after a short
while or turn the camcorder off and then on again.
ꢀYou can only record video signals in DV
standard (standard definition, SP or LP mode)
2
(
42)– shown in
from devices carrying the
logo. Note that
signals from identically shaped DV (IEEE1394)
terminals may be in different video standards.
Dubbing
FUNC.
NOTES
We recommend powering the camcorder using
the compact power adapter.
1 Load a blank cassette in this
camcorder.
2 Connected device: Load the
recorded cassette or disc.
FUNC.
Copyright Signal
Certain software tapes are copyright
protected. If you attempt to play back such
tape, “COPYRIGHT PROTECTED
PLAYBACK IS RESTRICTED” appears and
you will not be able to view the contents of
the tape. If you attempt to record from such
tape via the HDV/DV terminal,
“COPYRIGHT PROTECTED DUBBING
RESTRICTED” appears and you will not be
able to record the contents of the tape.
3 Press
[
, select (
)
REC PAUSE] and press (
).
4 Select (
).
) [EXECUTE] and press
(
5 Connected device: Start the
playback.
In record pause mode and while
recording you can check the picture on
the camcorder’s screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Connecting to a Computer
Connecting to
a
Computer
Connecting to a Computer
PC Connection Diagrams
DV Terminal
Check the type and orientation
of the terminal and make sure
you connect the DV cable
properly.
Terminal on the Connected
Device
Terminal on the Camcorder
Connecting Cable
1
Output connection (Signal Flow ) to a computer with a DV (IEEE1394) terminal or a
DV capture board.
DV Cable
(Commercially available)
4-pin
6-pin*
* Be careful to correctly insert the 6-pin plug into the DV terminal. Inserting it in the wrong direction
can result in damage to the camcorder.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Connecting to a Computer
IMPORTANT
Transferring Video Recordings
ꢀThe video transfer may not work correctly
depending on the software and the
You can transfer recordings to a computer
using the DV terminal.
specifications/settings of your computer.
ꢀIf the computer freezes while the camcorder
is connected to it, disconnect the DV cable and
turn off the camcorder and the computer. After a
short while, turn them on again, set the
Equipment and System Requirements
ꢀA computer equipped with an
IEEE1394 (DV) terminal or an IEEE1394
(DV) capturing board.
ꢀA DV cable (commercially available).
ꢀVideo Editing Software.
ꢀThe appropriate driver
A driver is preinstalled on Windows
operating systems later than Windows 98
Second Edition and Mac operating
systems later than Mac OS 9, and will be
installed automatically.
camcorder to
connection.
mode and restore the
ꢀBefore connecting the camcorder to the
computer using a DV cable, make sure that no
other IEEE1394 device is connected to the
computer.
ꢀDepending on the video editing software, you
may need to set the
switch on the
camcorder to a mode other than PLAY. Refer to
the instruction manual of the editing software.
Connecting
NOTES
ꢀWe recommend powering the camcorder
using the compact power adapter.
ꢀRefer also to the instruction manual of the
computer.
1 Start the computer.
2 Set the camcorder to
mode.
3 Connect the camcorder to the
computer using the digital
connection –connection type
1
(
45)– shown in the previous
section PC Connection Diagrams.
4 Start the video editing software.
Refer to the instruction manual of the
editing software.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Trouble?
Additional Information
Trouble?
Troubleshooting
If you have a problem with your camcorder, refer to this checklist. Consult your dealer
or a Canon Service Center if the problem persists.
Power Source
Problem
Solution
• Camcorder will not turn on.
• The camcorder switches off
by itself.
Battery pack is exhausted. Replace or charge the battery pack.
• The cassette compartment
cover will not open.
Attach the battery pack correctly.
Use the compact power adapter.
• The cassette compartment
stopped half way while
inserting/removing a tape.
• The LCD/viewfinder switches
on and off.
Battery pack will not charge.
Charge the battery pack in temperatures between 0 °C and
40 °C (32 °F and 104 °F).
–
–
Battery packs become hot with use and may not charge. When
the battery pack is outside the charging temperature range, the
CHG (charge) indicator will flash irregularly. The charging will
start once the battery pack temperature is below 40 °C (104 °F).
The battery pack is damaged. Use a different battery pack.
–
If you connect a faulty power adapter or battery pack, the
CHARGE indicator flashes approx. twice per second and the
charging stops.
Check that the compact power adapter is correctly connected to
the camcorder.
Recording/Playback
Problem
Solution
Turn on the camcorder.
Load a cassette.
Buttons will not work.
–
–
Abnormal characters appear on Disconnect the power source and reconnect it after a short time.
the screen. The camcorder
does not operate properly.
If the problem still persists, disconnect all power sources
(including the battery pack and the backup battery). This will
reset all the camcorder's settings.
“
“
“
” flashes on the screen.
” flashes on the screen.
” flashes on the screen.
Load a cassette.
Battery pack is exhausted. Replace or charge the battery pack.
Condensation is detected. See reference page.
Remove the cassette and reinsert it.
“REMOVE THE CASSETTE”
appears on the screen.
Video noise appears on screen. When using the camcorder in a room where a plasma TV is
located, keep a distance between the camcorder and the
plasma TV.
–
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Trouble?
Problem
Solution
Video noise appears on the TV When using the camcorder in a room where a TV is located,
–
–
screen.
keep a distance between the compact power adapter and the
power or antenna cables of the TV.
The tape stops during record
pause or playback pause.
To protect the tape and video heads, the camcorder will enter
the stop mode ( ) if left in playback pause (
) or record
pause (
) mode for 4 minutes 30 seconds. To resume the
Start/Stop
operation press
(when recording) or push the joystick
(during playback).
(
) towards
/
Recording
Problem
Solution
Image will not appear on the
screen.
Set the camcorder to
.
“SET THE TIME ZONE, DATE Set the time zone, date and time.
AND TIME” appears on the
Replace the backup lithium battery and set the time zone, date
screen.
and time.
Pressing the start/stop button
will not start recording.
Set the camcorder to
Load a cassette.
Tape reached the end (“
.
END” appears on the screen).
Rewind the tape or replace the cassette.
Cassette is protected (“
” flashes on the screen). Change the
position of the protect switch.
Camcorder will not focus.
Autofocus does not work on that subject. Focus manually.
If you are using the viewfinder, adjust it with the dioptric
adjustment lever.
Lens is dirty. Clean the lens with a soft lens-cleaning cloth.
Never use tissue paper to clean the lens.
–
Sound is distorted.
When recording near loud sounds (such as fireworks or
concerts), sound may become distorted.
Viewfinder picture is blurred.
Adjust the viewfinder with the dioptric adjustment lever.
Playback
Problem
Solution
During playback there is video Video heads are dirty. Clean the video heads.
noise.
Pressing the playback button
does not start playback.
Load a cassette.
Set the camcorder to
.
Tape reached the end (“
Rewind the tape.
END” appears on the screen).
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Trouble?
Problem
Solution
No sound from the built-in
speaker.
Open the LCD panel.
–
Speaker volume is turned off. Adjust the volume with the
[SPEAKER VOLUME] setting.
Image will not appear on the
TV screen.
Tape is running, but image will TV/VIDEO selector on the TV is not set to VIDEO. Set the
not appear on the TV screen.
selector to VIDEO.
Video heads are dirty. Clean the video heads.
You attempted to play back or dub copyright a protected tape.
Stop playback/dubbing.
Editing
Problem
Solution
Cannot record with this
Wrong signal standard. Refer also to the instruction manual of
–
camcorder video input from an the connected device.
external video device
connected using a DV cable.
List of Messages
Message
Explanation/Solution
SET THE TIME ZONE,
DATE AND TIME
You have not set the time zone, date and time. This message
appears each time you turn the power on until you set the time
zone, date and time.
CHANGE THE BATTERY
PACK
Battery pack is exhausted. Replace or charge the battery pack.
–
THE TAPE IS SET FOR
ERASURE PREVENTION
Cassette is protected. Replace the cassette or change the position
of the protect switch.
REMOVE THE CASSETTE Camcorder stopped operating to protect the tape. Remove the
cassette and reinsert it.
CHECK THE INPUT
The DV cable is not correctly connected to the DV terminal, or the
connected digital device is turned off.
The video input signal is in a different television system (PAL or
SECAM).
CONDENSATION HAS
BEEN DETECTED
Condensation has been detected in the camcorder.
CONDENSATION HAS
BEEN DETECTED
Condensation has been detected in the camcorder. Remove the
cassette.
REMOVE THE CASSETTE
TAPE END
Tape reached the end. Rewind the tape or replace the cassette.
–
–
INCORRECT TAPE
SPECIFICATION
You attempted to play back a tape recorded in a different television
system (PAL or SECAM) or in a recording standard not supported
by this camcorder.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Trouble?
Message
Explanation/Solution
INPUT SIGNAL NOT
SUPPORTED
The digital device connected with the DV cable is incompatible with
the camcorder.
–
HEADS DIRTY, USE
Video heads are dirty. Clean the video heads.
CLEANING CASSETTE
COPYRIGHT PROTECTED You attempted to play back a copyright protected tape.
PLAYBACK IS
RESTRICTED
COPYRIGHT PROTECTED You attempted to dub a copyright protected tape. May also appear
DUBBING RESTRICTED
when an anomalous signal is received during analog line-in
recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Do’s and Don’ts
Do’s and Don’ts
Handling Precautions
Battery Pack
DANGER!
Treat the battery pack with care.
• Keep it away from fire (or it might
explode).
Camcorder
ꢀDo not carry the camcorder by the LCD
panel. Be careful when closing the LCD
panel.
• Do not expose the battery pack to
temperature higher than 60 °C (140 °F).
Do not leave it near a heater or inside a
car in hot weather.
• Do not try to disassemble or modify it.
• Do not drop or knock it.
ꢀDo not leave the camcorder in places
subject to high temperatures (like the
inside of a car under direct sunlight), or
high humidity.
ꢀDo not use the camcorder near strong
electric or magnetic fields such as above
TVs, near plasma TVs or mobile phones.
ꢀDo not point the lens or viewfinder at
strong light sources. Do not leave the
camcorder pointed at a bright subject.
ꢀDo not use or store the camcorder in
dusty or sandy places. The camcorder is
not waterproof – avoid also water, mud or
salt. If any of the above should get into
the camcorder it may damage the
camcorder and/or the lens.
• Do not get it wet.
ꢀCharged battery packs continue to
discharge naturally. Therefore, charge
them on the day of use, or the day before,
to ensure a full charge.
ꢀAttach the terminal cover whenever a
battery pack is not in use. Contact with
metallic objects may cause a short circuit
and damage the battery pack.
ꢀDirty terminals may cause a poor
contact between the battery pack and the
camcorder. Wipe the terminals with a soft
cloth.
ꢀSince storing a charged battery pack for
a long time (about 1 year) can shorten its
lifecycle or affect performance, we
recommend to discharge the battery pack
fully and to store it in a dry place at
temperatures no higher than 30 °C
(86 °F). If you do not use the battery pack
for long periods, charge and discharge it
fully at least once a year. If you have
more than one battery pack, perform
these precautions at the same time for all
battery packs.
ꢀBe careful of heat generated by lighting
equipment.
ꢀDo not disassemble the camcorder. If
the camcorder does not function properly,
consult qualified service personnel.
ꢀHandle the camcorder with care. Do not
subject the camcorder to shocks or
vibration as this may cause damage.
ꢀAlthough the battery pack’s operating
temperature range is from 0 °C to 40 °C
(32 °F to 104 °F), the optimal range is
from 10 °C to 30 °C (50 °F to 86 °F). At
cold temperatures, performance will
temporarily decline. Warm it in your
pocket before use.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
Do’s and Don’ts
ꢀReplace the battery pack if the usable
time after full charge diminishes
substantially at normal temperatures.
ꢀWith cassettes equipped with a memory
function, metal plated terminals may
become dirty with use. Clean the
terminals with a cotton swab after about
10 times of removing and reinserting the
cassette. The memory function is not
supported by the camcorder.
About the battery terminal cover
The battery terminal cover has a [
shaped hole. This is useful when you
]-
wish to differentiate between charged and
uncharged battery packs.
Protecting Tapes from Accidental Erasure
To protect your recordings from accidental
erasure, slide the tab on the cassette to
SAVE or ERASE OFF.
Back side of the battery pack
Terminal cover attached
Charged
REC
SAVE
REC
SAVE
Uncharged
Lithium Button Battery
WARNING!
• The battery used in this device may
present a fire or chemical burn hazard if
mishandled. Do not recharge,
Cassette
ꢀRewind tapes after use. A slack or
damaged tape may cause video problems
and/or audio distortions during playback.
ꢀReturn cassettes to the case and store
them upright. Rewind tapes from time to
time if they are stored for a long time.
ꢀDo not leave the cassette in the
camcorder after use.
ꢀDo not use spliced tapes or
nonstandard cassettes as they may
damage the camcorder.
ꢀDo not use tapes that have been
jammed as video heads may become
dirty.
ꢀDo not insert anything into the small
holes of the cassette, or cover them with
cellophane tape.
disassemble, heat above 100 °C (212 °F)
or incinerate the battery.
• Replace the battery with a CR1616 made
by Panasonic, Hitachi Maxell, Sony,
Toshiba, Varta or Renata. Use of other
batteries may present a risk of fire or
explosion.
• Dispose of the used battery according to
applicable recycling regulations.
ꢀDo not pick up the battery using
tweezers or other metal tools as this will
cause a short circuit.
ꢀWipe the battery with a clean dry cloth
to ensure proper contact.
ꢀHandle cassettes with care. Do not
drop or subject them to severe impact as
this may damage the cassettes.
ꢀKeep the battery out of the reach of
children. If swallowed, seek medical
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Do’s and Don’ts
assistance immediately. The battery case
may break and the battery fluids may
cause internal damage.
Maintenance/Others
ꢀDo not disassemble, heat or immerse
the battery in water to avoid the risk of
explosion.
Cleaning the Camcorder
Camcorder Body
ꢀ
For California, USA only: Included lithium
ꢀUse a soft, dry cloth to clean the
battery contains Perchlorate Material –
special handling may apply. See
perchlorate for details.
camcorder body. Never use chemically
treated cloth or volatile solvents such as
paint thinner.
Lens and Viewfinder
ꢀIf the lens surface is dirty, the autofocus
may not work properly.
ꢀRemove any dust or dirt particles using
a non-aerosol type blower brush.
ꢀUse a clean, soft lens-cleaning cloth to
gently wipe the lens or viewfinder. Never
use tissue paper.
LCD Screen
ꢀClean the LCD screen using a clean,
soft lens-cleaning cloth.
ꢀCondensation may form on the surface
of the screen when the temperature
changes suddenly. Wipe it with a soft dry
cloth.
Storage
ꢀIf you do not intend to use the
camcorder for a long time, store it in a
place free of dust, in low humidity, and at
temperatures not higher than 30 °C
(86 °F).
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Do’s and Don’ts
TO AVOID CONDENSATION
ꢀDo not expose the camcorder to
sudden or extreme changes in
temperature.
ꢀRemove the cassette, place the
camcorder in an airtight plastic bag and
let it adjust to temperature changes
slowly before removing it from the bag.
Condensation
Moving the camcorder rapidly between
hot and cold temperatures may cause
condensation (water droplets) to form on
its internal surfaces. Stop using the
camcorder if condensation is detected.
Continued use may damage the
camcorder.
WHEN CONDENSATION IS DETECTED
ꢀThe camcorder automatically shuts off,
the warning message “CONDENSATION
HAS BEEN DETECTED” appears for
approx. 4 seconds and
ꢀIf a cassette is loaded, the warning
Condensation may form in the following
cases:
When the camcorder is moved from an
air-conditioned room to a warm, humid
place
starts flashing.
message “REMOVE THE CASSETTE”
appears and
starts flashing. Remove
the cassette immediately and leave the
cassette compartment open. Leaving the
cassette in the camcorder may damage
the tape.
ꢀA cassette cannot be loaded when
condensation is detected.
When the camcorder is moved from a
cold place to a warm room
RESUMING USE
ꢀThe precise time required for water
droplets to evaporate will vary depending
on the location and weather conditions.
After the condensation warning stops
flashing, wait for 1 more hour before
resuming use.
When the camcorder is left in a humid
room
When a cold room is heated rapidly
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Do’s and Don’ts
Using the Camcorder Abroad
Power Sources
You can use the compact power adapter
to operate the camcorder and to charge
battery packs in any country with power
supply between 100 and 240 V AC, 50/60
Hz. Consult the Canon Service Center for
information on plug adapters for overseas
use.
Playback on a TV Screen
You can only play back your recordings
on TVs compatible with the NTSC
system. The NTSC system is used in the
following countries/areas:
American Samoa, Antigua, Aruba,
Bahamas, Barbados, Bermuda, Bolivia,
Canada, Chile, Colombia, Costa Rica,
Cuba, Ecuador, El Salvador, Guam,
Guatemala, Greenland, Haiti, Honduras,
Jamaica, Japan, Korea, Mexico,
Micronesia, Myanmar, Nicaragua,
Panama, Peru, Philippines, Puerto Rico,
Saint Kitts and Nevis, Saint Lucia, Saint
Vincent and the Grenadines, Surinam,
Taiwan, Trinidad and Tobago, USA,
Venezuela, Virgin Islands.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
General Information
General Information
System Diagram (Availability differs from area to area)
WS-20 Wrist Strap
SS600/SS650
CBC-NB2
CB-2LW
Shoulder Strap
Car Battery Charger
Battery Charger
MiniDV
Video Cassette
NB-2L, NB-2LH,
BP-2L5*, BP-2L12,
BP-2L14 Battery Pack
CA-590 Compact
Power Adapter
NB-2L, NB-2LH,
BP-2L5, BP-2L12,
BP-2L14 Battery Pack
TV
STV-250N
Stereo Video Cable
VCR
Commercially available
DV Cable
DVD Recorder/Digital
Device with DV Terminal
SC-2000 Soft
Carrying Case
* The BP-2L5 is not available as a separate optional accessory.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
General Information
Optional Accessories
Call or visit your local retailer/dealer for genuine Canon video accessories. You can
also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-
4040, Canon U.S.A. Information Center.
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine Canon
accessories. Canon shall not be liable for any damage to this product and/or accidents
such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a
leakage and/or explosion of a battery pack). Please note that this warranty does not apply
to repairs arising out of the malfunction of non-genuine Canon accessories, although you
may request such repairs on a chargeable basis.
Battery Packs
When you need extra battery packs, select
one of the following models: NB-2L, NB-2LH,
BP-2L12, BP-2L14.
CB-2LW Battery Charger
Use the battery charger for charging the
battery packs. It plugs directly into a power
outlet without a cable.
Battery Pack
BP-2L5
Charging Time*
70 min.
NB-2L
80 min.
NB-2LH
BP-2L12
BP-2L14
90 min.
150 min.
170 min.
* Charging time varies according to the charging condition.
CBC-NB2 Car Battery Charger
Use the car battery charger to charge battery
packs on the move. The car battery cable plugs
into your car’s cigarette lighter and runs off a
12-24 V DC negative ground battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
General Information
Shoulder Strap
You can attach a shoulder strap for more
security and portability.
Pass the ends through the strap mount and
adjust the length of the strap.
WS-20 Wrist Strap
Use this for extra additional protection for
active shooting.
SC-2000 Soft Carrying Case
A handy camcorder bag with padded
compartments and plenty of space for
accessories.
This mark identifies genuine Canon video accessories. When you use
Canon video equipment, we recommend Canon-brand accessories or
products bearing the same mark.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
General Information
Product Codes
Provided Accessories
CA-590 Compact Power Adapter
STV-250N Stereo Video Cable
D85-1671-000
3067A002AA (D82-0590-201)
Optional Accessories
BP-2L12 Battery Pack
7871A002AA
BP-2L14 Battery Pack
9582A002AA
NB-2L Battery Pack
7302A001AA
CB-2LW Battery Charger
CBC-NB2 Car Battery Charger
WS-20 Wrist Strap
SC-2000 Soft Carrying Case
DVM-CL DV Cleaning Cassette
0763B001AA
7873A002AA
3118A002AA (D81-0190-202)
9389A001AA
3134A002AA (D36-0032-201)
Download from Www.Somanuals.com. All Manuals Search And Download.
60
General Information
Specifications
ZR800
System
Video Recording System
2 rotary heads, helical scanning DV system (consumer digital VCR SD
system), digital component recording
Audio Recording System
Television System
Image Sensor
PCM digital sound: 16 bit (48 kHz/2 channels); 12 bit (32 kHz)
EIA standard (525 lines, 60 fields) NTSC color signal
1/6-inch CCD, approx. 680,000 pixels
Effective pixels
16:9 Movies (Image stabilizer [ON]) approx. 360,000 pixels
16:9 Movies (Image stabilizer [OFF]) approx. 450,000 pixels
4:3 Movies
approx. 340,000 pixels
Compatible Tapes
Tape Speed
Videocassettes bearing the
mark
SP: 18.81 mm/s (0.74 ips); LP: 12.56 mm/s (0.49 ips)
SP: 60 minutes; LP: 90 minutes
Maximum Recording Time
(60 min. tape)
LCD Screen
Viewfinder
Microphone
Lens
2.7 in., wide, TFT color, approx. 112,000 pixels
0.35 in., wide, TFT color, approx. 114,000 pixels
Stereo electret condenser microphone
f=2.6–91 mm, F/2.0–5.0, 35x power zoom
35 mm equivalent:
16:9 Movies (Image stabilizer [ON])
45.8–1,603
16:9 Movies (Image stabilizer [OFF]) 41.0–1,435
4:3 Movies
49.8–1,743
Lens Configuration
AF system
10 elements in 8 groups
TTL autofocus, manual focus available
Minimum Focusing Distance
White Balance
1 m (3.3 ft.); 1 cm (0.39 in.) on maximum wide angle
Auto white balance, preset white balance (DAYLIGHT, TUNGSTEN) or
custom white balance
Minimum Illumination
2 lx ([NIGHT] recording program, Shutter speed at 1/8)
8 lx (Easy recording mode, Auto slow shutter [ON], Shutter speed at 1/30)
Recommended Illumination
Image Stabilization
More than 100 lx
Electronic
Input/Output Terminals
AV Terminal
∅3.5 mm minijack, output only
Video: 1 Vp-p/75 ohms unbalanced
Audio: -10 dBV (47 kohms load/3 kohms or less)
DV Terminal
MIC Terminal
4 pin (IEEE1394 standard), input/output
∅3.5 mm stereo mini-jack
–57 dBV (with 600 ohm mic)/5 kohms or more
Power/Others
Power supply (rated)
7.4 V DC (battery pack), 8.4 V DC (compact power adapter)
2.1 W
Power consumption
(AF on)
Operating temperature
0 – 40 °C (32 – 104 °F)
Dimensions (W x H x D)
Weight (camcorder body only)
57 x 92 x 119 mm (2.2 x 3.6 x 4.7 in.) excluding the grip belt
375 g (13.2 oz.)
Download from Www.Somanuals.com. All Manuals Search And Download.
61
General Information
CA-590 Compact Power Adapter
Power input
100 – 240 V AC, 50/60 Hz, 0.14 – 0.08 A
Rated output
Operating temperature
Dimensions
8.4 V DC, 0.6 A
0 – 40 °C (32 – 104 °F)
46 x 26 x 70 mm (1.8 x 1.0 x 2.8 in.)
95 g (3.4 oz.)
Weight
BP-2L5 Battery Pack
Battery type
Rechargeable Lithium Ion Battery
7.4 V DC
Rated voltage
Operating temperature
Battery capacity
Dimensions
0 – 40 °C (32 – 104 °F)
530 mAh
33.3 x 16.2 x 45.2 mm (1.3 x 0.64 x 1.8 in.)
40 g (1.4 oz.)
Weight
Weight and dimensions are approximate. Errors and omissions excepted. Subject to
change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
General Information
V
W
T
Z
Download from Www.Somanuals.com. All Manuals Search And Download.
64
U.S.A.
CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY FOR
THE UNITED STATES
The warranty set forward below is given by Canon U.S.A., Inc. with respect to equipment purchased in the
United States. The limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
Canon consumer digital video equipment is warranted under normal, non-commercial, personal use, against
defective materials or workmanship as follows:
Parts: Defective parts will be exchanged for new parts or comparable rebuilt parts for a period of ONE YEAR from
the date of original purchase, except for a defective Video Head, which will be exchanged for a period of three
months from the date of purchase.
Labor: For a period of ONE YEAR from the date of original purchase, labor will be provided free of charge by our
factory service centers or designated service facilities located in the United States.
When returning equipment under this warranty, you must pre-pay the shipping charges, and you must enclose the
Bill of Sale or other proof of purchase with a complete explanation of the problem. During your ONE-YEAR warranty
period, repairs will be made and the equipment return-shipped to you free of charge. After your warranty period is
over, you will be given an estimate of the cost of repair and an opportunity to approve or disapprove of the repair
expense before it is incurred. If you approve, repairs will be made and the equipment return-shipped to you.
(shipping charges apply). If you disapprove, we will return-ship the equipment at no charge to you.
Non-Canon brand peripheral equipment and software which may be distributed with Canon DV camcorders
are sold “AS IS” without warranty of any kind by CUSA, including any implied warranty regarding
merchantability or fitness for a particular purpose. The sole warranty with respect to such non-Canon
brand items is given by the manufacturer or producer thereof.
CUSA shall have no responsibility under this limited warranty for use of Canon DV Camcorders in conjunction with
incompatible peripheral equipment and incompatible software.
In order to obtain warranty service, contact the authorized Canon retail dealer from whom you purchased the DV
Camcorder or call the CANON INFORMATION CENTER AT 1-800-828-4040). You will be directed to the nearest
service facility for your product.
This Limited Warranty covers all defects encountered in normal use of the equipment and does not apply in the
following cases:
A) Loss or damage to the equipment due to abuse, mishandling, accident, improper maintenance, or failure to
follow operating instructions;
B) If the equipment is defective as a result of leaking batteries, sand, dirt or water damage;
C)If defects or damages are caused by the use of unauthorized parts or by service other than our authorized
agent;
D)If the equipment is used for commercial or industrial use.
This Limited Warranty does not cover cabinet (exterior finish), video cassette tape, head cleanings, nor does it apply
to equipment purchased outside the United States. This warranty does not cover units sold to rental firms, military
operations, hotels, schools, hospitals or for other commercial, industrial, or institutional applications. These uses are
covered only by such specific warranty as Canon may issue with such sales.
This Limited Warranty does not apply to accessories or consumables for the DV Camcorder, which are sold “AS IS”,
without warranty of any kind by CUSA.
Please retain this warranty card and your Bill of Sale as a permanent record of your purchase. This card is most
important in order to be sure you are contacted right away should there be a safety inspection, modification or
product recall under applicable laws or regulations.
NO IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
APPLIES TO THIS EQUIPMENT AFTER THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR
GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH
RESPECT TO THIS EQUIPMENT SHALL BIND THE UNDERSIGNED. (SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION
MAY NOT APPLY TO YOU). CUSA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE
FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OF DATA, OR ANY OTHER
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO
USE THE DV CAMCORDER, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND
EVEN IF CUSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF
ANY KIND AGAINST CUSA BE GREATER THAN THE PURCHASE PRICE OF THE DV CAMCORDER SOLD BY
CUSA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL
RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS
AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE DV CAMCORDER NOT
CAUSED DIRECTLY BY THE NEGLIGENCE OF CUSA. (SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU).THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER
OF THIS EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
CANON U.S.A., INC.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
CANADA
CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY
The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon digital video
equipment purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of
purchase for this Canon digital video equipment to a Canon Service Facility when repairs are required.
Canon consumer video digital equipment is warranted under normal, non-commercial, personal use, against defective
materials or workmanship as follows:
Parts: Defective parts will be exchanged for new parts or, at Canon Canada’s option, comparable rebuilt parts for a period of
one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from the
date of purchase.
Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon
Service Facilities in Canada.
This limited warranty covers all defects except where:
(a) The loss or damage to the product results from:
i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow
instructions contained in the instruction manual;
ii) the use of accessories, attachments, products, supplies, parts or devices with this Canon product that do not conform
to Canon specifications or that cause abnormally frequent service problems;
iii) repairs or services performed by any party other than a Canon Service Facility;
iv) defective batteries or any exposure to water, sand or dirt;
v) shipping (claim must be presented to the shipper);
(b) Any serial number on the video equipment is altered or removed.
(c) The digital video equipment is used for commercial, professional or industrial purposes.
This limited warranty does not cover the cabinet (exterior finish) of the digital video equipment, video cassette tapes, head
cleanings, nor does it apply to digital video equipment purchased outside Canada.
TO OBTAIN WARRANTY SERVICE
Ship your Canon digital video equipment in its original carton, box or equivalent, properly packed, fully insured with shipping
charges prepaid, together with a copy of your bill of sale or other proof of purchase and a description of the problem to any of
the Canon Service Facilities in Canada.
LIMITATIONS
Except as otherwise required by applicable legislation, this warranty is in lieu of all other warranties, conditions, guarantees or
representations, express or implied, statutory or otherwise, relative to this Canon product, including implied warranties or
conditions of merchantability or fitness for a particular purpose.
Canon Canada assumes no liability for special, consequential or incidental damages or loss that may arise, whether on
account of negligence or otherwise, from the use, misuse or inability to use this Canon product (including loss of profit,
revenue, video tapes or enjoyment) or from failure to conform to any express or implied warranties, conditions, guarantees or
representations. Any recovery under this limited warranty shall not exceed the purchase price of the product. Canon Canada
does not assume or authorize any other person to assume for Canon Canada any other liability with respect to this Canon
product.
This warranty does not extend to any person other than the original purchaser of this Canon product or the person for whom it
was purchased as a gift and states your exclusive remedy.
NOTICE TO CONSUMER
If you plan to take important videos or if the product has not been used for some time, please check all functions with the
instruction book before using it.
Download from Www.Somanuals.com. All Manuals Search And Download.
CANON INC.
U.S.A.
CANON U.S.A., INC. NEW JERSEY OFFICE
100 Jamesburg Road, Jamesburg, NJ 08831 USA
CANON U.S.A., INC. CHICAGO OFFICE
100 Park Blvd., Itasca, IL 60143 USA
CANON U.S.A., INC. LOS ANGELES OFFICE
15955 Alton Parkway, Irvine, CA 92618 USA
CANON U.S.A., INC. HONOLULU OFFICE
210 Ward Avenue, Suite 200, Honolulu, Hl 96814 USA
ꢁ If you have any questions, call the Canon U.S.A. Information Center
toll-free at 1-800-828-4040 (U.S.A. only).
CANADA
CANON CANADA INC. NATIONAL HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7
CANON CANADA INC. CALGARY
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7
CANON CANADA INC. MONTREAL
5990 Côte de Liesse, Quebec H4T 1V7
ꢁ If you have any questions, call the Canon Canada Information Center
toll-free at 1-800-828-4040 (CANADA only).
ꢁ Si vous avez des questions, veuillez téléphoner sand frais au Canada
1-800-828-4040 (CANADA seulement).
MEXICO
CANON MEXICANA, S. DE R.L. DE C.V.
Periferico Sur No. 4124 Col. Ex-Rancho de Anzaldo C.P. 01900
México, D.F., México
CANON U.S.A., INC. NEW JERSEY OFFICE
100 Jamesburg Road, Jamesburg, NJ 08831 USA
CENTRO Y
CANON LATIN AMERICA, INC.
SURAMÉRICA
703 Waterford Way Suite 400 Miami, FL 33126 USA
ASIA
CANON HONGKONG COMPANY LTD.
19/F, The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon,
Hong Kong
The information on this manual is verified as of January 1st, 2007.
Les informations contenues dans ce manuel ont été vérifiées le 1er janvier 2007.
La información de este manual fue verificada el 1 de enero de 2007.
Printed on 100% reused paper.
Document réalisé avec du papier recyclé à 100%.
El papel aqui utilizado es 100% reciclado.
PUB.DIM-788
0000Ni0.0
© CANON INC. 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
|