Bushnell Binoculars 11 0512 User Manual

Model: 11-0512  
LIT. #: 98-0330/10-03  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Congratulations on your purchase of a Bushnell ImageView binocular. Before using the product, please  
read the instructions contained in this manual and take time to familiarize yourelf with the different  
parts and features of the product.  
LCD DISPLAY  
1.  
2.  
3.  
High Resolution Mode = 1280x1024 Pixels  
Low Resolution Mode = 1024x768 Pixels  
Select the timer to take a delayed picture. This gives you  
approximately a 10-second delay.  
CAMERA OPERATION INSTRUCTIONS  
BUTTON DESCRIPTIONS  
4.  
This mode allows you to take short movie clips, saved as “.avi”  
files.  
Mode  
Snap  
The MODE button has three functions:  
5.  
Selects different modes.  
1. Power on: Press and hold button until the camera turns on. When  
the camera is connected to your PC via the USB cable provided,  
the camera will power on automatically.  
6.  
Deletes all the pictures in the memory.  
7.  
Deletes the last picture taken.  
8.  
9.  
10.  
USB mark appears when USB cord is connected between the camera and the PC.  
Battery mark keeps track of the battery life left.  
a. Picture Number-- This area will show the number of pictures in the memory.  
b. SET-- select Hq (high quality)/Lq (low quality) mode, STO (Mass Storage)/ PCC (PC  
2. Power off: While the camera is on, press and hold the button until  
camera turns off. If camera has not been used or if a button has  
not been pressed for over 2 minutes, the camera will automatically  
power off to save battery life. If the camera is connected via the  
USB cable, it will not power off except when PC is turned off.  
3. Mode change: Press this button rapidly to change modes.  
Cam)  
mode, 50Hz/60Hz frequency  
c. FUL--When the memory is full, the display will show “FUL” and alarm will sound.  
OPERATION GUIDE  
1. The camera is powered by two AAA batteries (included) or USB power (included).  
2. Insert the battery into battery compartment.  
The SNAP button has two functions:  
1. Take a picture: Press this button to take a picture when the camera  
is on. (But not in the PC mode or mode change.  
3. Press and hold the MODE button until camera turns on.  
2. Select: In “Mode Change”, press this button to confirm the function.  
4. Press SNAP to take a picture, or press the MODE button quickly to change mode settings as described  
above. The camera is set at infinity and will not be focused on an object closer than 49 feet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2
5. The mode setting operation is a cycle loop, so press the MODE button to switch to another mode.  
The loop order of the different modes is shown here:  
10. Low Resolution mode, will cause your pictures to be of a lower resolution, but will allow you  
to store many more pictures in the camera’s memory. The default setting is Hi. To change the  
resolution, press the MODE button until you see the “mode” icon appears. Press the SNAP button,  
and Lo will appear. The camera is changed from high resolution to low resolution. Repeat the same  
steps to change the camera back to Hi resolution mode.  
6. To change settings, toggle through the different modes by pressing the MODE button. When a  
mode is selected, the indicator symbol on the LCD will appear. You can then select that mode by  
pressing the SNAP button.  
7. When in “Normal” mode, press SNAP to take a picture.  
CAPTURED PICTURES WITH BUILT-IN MEMORY:  
Press SNAP->  
Pixels (Resolution)  
1280X1024(Hi)  
Image Quality  
High quality (HQ)  
Low quality (LQ)  
High quality (HQ)  
Low quality (LQ)  
Captured Picture Quantity  
Up to 40 pictures  
Up to 55 pictures  
Up to 55 pictures  
Up to 85 pictures  
8. By pressing the MODE button the camera will enter “Mode Change”.  
9. To select “Self-Timer” mode, press MODE and the self -timer mark appears, then press SNAP  
and the camera will take a picture after a 10 second delay. The camera exits self-timer mode  
automatically after capture is done and the self-timer mark disappears on the LCD at the same  
time.  
1024X768(Lo)  
11. When in “Normal” mode press the MODE button 3 times to enter the “AVI” mode.  
The icon will appear. Press the SNAP button to start AVI capturing, and  
counting. The resolution for AVI is 320X240 pixies. The memory of the camera can  
hold from 40-70 seconds of live action. It depends on what objects you are capturing  
Press MODE->  
press SNAP to capture.  
and the lighting conditions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
4
12. To delete all pictures in the camera’s memory, select the “Delete All” mode. This  
represented by the trash can icon. Press the SNAP button to confirm. The picture  
number will then blink. You will hear a tone that becomes higher as the pictures are  
deleted. Once complete, the picture number will reset to possible captured numbers.  
c. Select 50 Hz or 60 Hz settings for the camera output by pressing the SNAP button. Then press  
MODE button to confirm and enter next setting. The camera’s default mode is the “60” mode,  
which matches the power frequency for the United States. To change to the “50” mode, press the  
SNAP button until the “60” changes to “50”. Confirm the selection by pressing the SNAP  
button. To avoid any flickering on the picture, the correct power frequency (either 50 or 60) for  
your country must be selected.  
13. If the “delete Last” icon appears, the display will show the following: Press SNAP  
to delete the last picture in the camera’s memory. The picture number will be  
automatically increased after deletion is done.  
14. Press the MODE button until SET mode appears on the LCD. Press SNAP to enter  
Setting mode. To change the setting of image quality (default setting is High), Storage/PC  
Cam (default setting is Storage), 50 Hz/60 Hz frequency (default setting is 60 Hz).  
a. Select the image quality at Hq (High quality) or Lq (Low quality) by pressing the  
SNAP button. Then press the MODE button to confirm and enter next setting.  
d. Escape the Setting mode by pressing the SNAP button.  
15. The battery mark keeps tracking the battery life. If the battery indicator is blinking, it is necessary  
to replace the batteries soon.  
b. Select the STO (Mass Storage) or PCC (PC CAM) mode by pressing the SNAP button. Then  
press MODE button to confirm and enter next setting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
6
To load software insert CD into your CD-ROW drive and it will self-start. The CD contains the Roxio  
Photo Suite software as well as the drivers that will allow your computer to recognize your camera.  
DOWNLOADING THE PICTURES TO YOUR COMPUTER  
1. The camera has a mass storage function. When connected to the PC without changing any setting,  
Follow the “On Screen” instructions. If your computer does not have an auto play function and will not  
automatically run CDs, open the CD in the “My Computer” window and click on the “autorun.exe”.  
After driver are successfully installed, click on “Roxio Photo Suite ”to install the photo imaging  
software.  
a new disc icon will appear in the computer interface. Click the icon, the captured pictures will be  
seen directly.  
2. The captured pictures can also be downloaded and saved in the PC via the photo imaging  
software.  
CONNECTING TO THE COMPUTER  
System Requirements:  
Pentium 166MMX minimum  
WARNING: Make sure you download any picture from your camera before  
you remove the batteries from the camera.  
(Recommended Pentium 266)  
Follow the instructions on the software to successfully download and save the pictures on your computer.  
An installation screen will automatically guide you through the installation process.  
Windows 98 / Me / Windows 2000 / XP  
Minimum 32MB of RAM  
USB port  
Minimum 200MB of Hard Drive space with additional 65 MB space for IE and DirectX  
CD-ROM driver  
Super VGA Monitor and video card  
SOFTWARE INSTALLATION  
For OS Windows Me/2000/XP, no need to install software, just plug in and use.  
Load software prior to connecting your camera to your computer if your OS is Windows 98.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
8
WARRANTY / REPAIR  
NOTES  
TWO-YEAR LIMITED WARRANTY  
Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the  
event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage  
prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone  
other than a Bushnell Authorized Service Department.  
Any return made under this warranty must be accompanied by the items listed below:  
1) A check/money order in the amount of $10.00 to cover the cost of postage and handling  
2) Name and address for product return  
3) An explanation of the defect  
4) Proof of Date Purchased  
5) Product should be well packed in a sturdy outside shipping carton, to prevent  
damage in transit, with return postage prepaid to the address listed below:  
IN U.S.A. SEND TO:  
Bushnell Performance Optics  
Attn.: Repairs  
8500 Marshall Drive  
Lenexa, Kansas 66214  
IN CANADA SEND TO:  
Bushnell Performance Optics  
Attn.: Repairs  
25A East Pearce Street, Unit 1  
Richmond Hill, Ontario L4B 2M9  
For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information. In Europe  
you may also contact Bushnell at:  
BUSHNELL Performance Optics Gmbh  
European Service Centre  
MORSESTRASSE 4  
D- 50769 KÖLN  
GERMANY  
Tél: +49 (0) 221 709 939 3  
Fax: +49 (0) 221 709 939 8  
This warranty gives you specific legal rights.  
You may have other rights which vary from country to country.  
©2003 Bushnell Performance Optics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
10  

Broan Door C305 User Manual
Bryant Furnace 396JAZ User Manual
Bushnell Film Camera 20 3031 User Manual
Carrier Heat Pump 50JZ A User Manual
Carver Stereo Amplifier PM 200 User Manual
Casio Cell Phone C721 User Manual
Chauvet Surge Protector DMX 4 LED User Manual
Chicago Electric Mixer 65760 User Manual
Chicco Stroller 431 User Manual
Cisco Systems Network Card 2600 User Manual