QUAD BLADE FOOD
PROCESSOR
OWNER’S MANUAL
Model BP101H2
120V., 60Hz., 800 Watts
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.: 1 (800) 798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING & MAINTENANCE
IMPORTANT SAFEGUARDS
CAUTION: Make sure that the unit is unplugged from power source and control
button is on “OFF” before inserting or removing any attachments and
before cleaning.
Read Instruction Manual Before Use
When using electrical appliances, basic safety precautions should always be
followed, including the following:
Re-settable Thermal Safety
Device
1. Read all instructions before using the
appliance. It is suggested that you
keep these instructions in a safe
place for future reference.
2. Your voltage must correspond to the
voltage printed on the bottom of the
appliance.
3. To protect against electrical shock,
do not immerse the motor housing
(base), cord, or plug in water or other
liquid.
4. Close supervision is necessary when
the appliance is used by or near
children.
5. Unplug appliance from outlet when
not in use, before putting on or taking
off parts and before cleaning.
6. Avoid touching moving parts at all
times.
7. Do not operate the appliance with a
damaged cord or plug, or after the
appliance malfunctions, has been
dropped or damaged in any manner.
Return the appliance to EURO-PRO
Operating LLC for examination,
repair, electrical or mechanical
adjustment.
9. Do not use outdoors.
1. Turn the “ON/OFF” speed control
10. Do not let cord hang over edge of table
or counter or touch hot surfaces.
11. Keep hands and utensils away from
moving blades or discs while
to the “OFF” position
2. Unplug the unit from the wall
receptacle.
3. Remove and empty the processor
bowl. Ensure that no food is
jamming the cutting blades or
attachments.
4. Allow the appliance to cool down
for a minimum of 30 minutes.
5. Re-install the processor bowl and
re-plug appliance in the wall outlet.
6. Proceed to use the appliance as
before. Should the appliance still
fail to operate, turn the “ON/OFF”
speed control to the “OFF” position
and unplug from the wall outlet.
Allow the appliance to cool down
for an additional 1 to 2 hours. After
this time has passed, repeat the
restart procedure, steps 5 and 6
above.
Your Bravetti Platinum Pro Food
Processing Center has been designed
with a unique safety system which
prevents damage to the unit’s motor
and drive system, should you
inadvertently overload your appliance.
The safety system will automatically cut
the electric power to the appliance
when the device senses an overload or
excessive temperature in the motor or
drive system. Should this occur during
use and the appliance stops
processing food to reduce the risk of
severe injury to persons or damage to
the food processor. A scraper may be
used but must be used only when the
food processor is not running.
12. Blades are sharp. Handle carefully.
When handling the chopper blades
always hold it by the plastic hub.
13. To reduce the risk of injury, never
place cutting blades or discs on the
base without first putting bowl properly
in place.
14. Be certain cover is securely locked in
place before operating appliance.
15. Never feed food by hand. Always use
food pusher.
16. Do not attempt to by-pass the cover
interlock mechanism.
functioning, following is the re-setting
procedure:
17. Always operate food processor with
the cover in place.
18. Always operate the blender with the
cover in place.
8. The use of attachments including
canning jars not recommended by
the manufacturer may cause fire,
electric shock or injury to persons.
19. When blending hot liquids, remove the
center piece of the two-piece blender
cover.
IMPORTANT NOTICE
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electrical shock, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify the plug in any way.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
REV. 01/05A
1
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations! As the owner of a new BRAVETTI PLATINUM PRO Quad Blade
Food Processor, you are about to use a very versatile and powerful kitchen appliance
that will quickly become an indispensable item in your kitchen. BRAVETTI
PLATINUM PRO products are engineered to meet the highest quality standards and
are designed to offer the ultimate in ease of operation and convenience.
CLEANING & MAINTENANCE
CAUTION: Make sure that the unit is unplugged from power source and control
button is on “OFF” before inserting or removing any attachments and
before cleaning.
IMPORTANT INFORMATION
• Never immerse the unit, cord or plug
in water or any other liquid.
• Clean the main unit with a damp
cloth only.
• Only the stainless steel blades can
be washed in the dishwasher.
• All other parts can be cleaned in
warm sudsy water using regular
dishwashing liquid.
• If food has spilled over onto the
main unit, use the pointy end of the
spatula to clean the cracks and
crevices of the base under the food
processor bowl. (Fig. 26)
• To clean the blender, fill the blender
jar with warm, sudsy water, place
the blender lid on the unit and run
the blender at speed level "2" (high)
for 30 seconds. Rinse and repeat if
necessary.
Storing the Blades
Your Bravetti Platinum Pro Food
Processing Center comes with a blade
storage compartment and a cover to
store your blades when they are not in
use. (Fig. 27)
Please read all the following instructions carefully.
IMPORTANT
For your protection, the BRAVETTI PLATINUM PRO Quad Blade Food Processor
has a double safety switch so that it cannot run unless the food processor lid is
locked in place and either the safety cover or the blender is also locked in place.
Storage
Compartment
Storage
Cover
PLEASE NOTE
A. To operate the food processor, the safety cover must be properly locked in place.
B. To operate the blender, processor lid must be locked in place.
C. When operating blender make sure that all attachments are first removed from the
food processor bowl.
D. Do not attempt to use both blender and food processor at the same time.
E. Do not attempt to by-pass the cover safety interlock mechanism or the main lid
interlock.
Fig. 27
Place the blade
storage compartment
over the food
processor lid.
(Fig. 28)
F. Always remove the chopping blade protective cover before using.
Fig. 28
WARNING: Always
remove the blender and
close the safety cover
when using the food
processor.
Carefully insert the
blades into the slots.
(Fig. 29)
Fig. 26
Hints & Tips:
• The double chopping blades can be
used for chopping meat, fish,
vegetables, cheese, etc. setting
the speed to maximum.
Fig. 29
• For finer chopping, increase the
length of time you process.
• For coarser chopping, use the pulse
button for a few seconds and monitor
food texture.
• Pre-cut larger pieces to make them fit
into the feed tube. When chopping
hard foods (e.g. meat, cheese) cut
into 1 “/2.4 cm cubes.
• For shredding, place food horizontally
into the feed tube, for slicing place the
food vertically.
Place the blade storage
cover over the blades.
(Fig. 30)
WARNING: The food processor
bowl must always be in place with
the food processor lid in place
when using the blender. Please
note that NO accessory
(i.e. blade or attachment) must be
inserted inside the food processor
bowl when the blender is being
used.
Fig. 30
No attachments
inside
You can also store
the blender with
the unit as shown
in Fig. 31.
• When blending, pour the liquids in
first and then add the solid food.
Begin blending at the lower speed
and increase when needed.
IMPORTANT: Remove chopping blade protective cover(s) before use.
Protective blade cover(s) to be used only for storage.
Fig. 31
2
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
GETTING TO KNOW YOUR QUAD BLADE FOOD
PROCESSOR
4. Insert the coffee grinder into the blender opening. (Fig. 20)
5. Place the ingredients to be ground in the coffee grinder.
6. Do Not fill above the max line of the coffee grinder bowl.
7. Place the coffee grinder lid onto the coffee grinder.
8. Turn the coffee grinder lid counter clockwise to lock lid in
place.
9. Recommended speed levels for grinding coffee are between
5 to MAX.
10. Always operate the coffee grinder with the coffee grinder lid
locked in place.
Fig. 20
WARNING: Never operate the coffee grinder without the food
processor bowl in place and without the coffee grinder lid on.
Do Not process hot ingredients in the coffee grinder.
IMPORTANT: Do NOT operate continuously for more than 20
seconds at one time.
Fig. 21
NOTE: The higher the speed setting, the finer the grind.
Operating the Blender
CAUTION: Make sure that the unit is unplugged from the power
source and the the Speed Control Dial is in the "Off" position
before inserting or removing any attachments and before
cleaning.
1. Place the food processor bowl onto the processor body.
(Fig. 21)
Fig. 22
2. When fitted correctly, the handle will fit into the slot at the
base of the unit.
3. Place the food processor lid on the bowl and lock in place by
turning counter clockwise. (Fig. 22) Make sure that NO
ATTACHMENTS are inside the food processor bowl when
you are using the blender.
4. Open the safety cover by pressing on the safety cover
release button. (Fig. 23)
5. Place the blender jar in the opening and turn counter
clockwise to lock in place. (Fig. 24)
WARNING: Never operate the blender without the blender lid in
place. When processing hot ingredients, remove the
measuring cap from the blender lid to allow steam to
escape. (Fig. 25)
6. Recommended speed level for blending are between 5 to
MAX. When blending soft vegetables or fruits start with level
“5" and then go to a higher level. For hard vegetables or fruit
always use MAX speed level.
IMPORTANT: Do NOT load the blender with more than 10 oz.
(300 gr.) of hard vegetables at one time. Do NOT operate
continuously for more than 20 seconds at one time.
NOTE: You can crush 16 oz. (500 ml) of ice cubes in the blender
using the PULSE/TURBO button.
Fig. 23
1.
2.
3.
4.
5.
6.
7.
8.
9.
Safety Cover
Safety Cover Release Button
Main Unit
Pulse/Turbo Button
On/Off Speed Control
Spindle
Blender Jar
Measuring Cap (1 oz.)
Blender Lid
18. Blade Storage Cover
19. Thin Shredding Blade
20. Thick Shredding Blade
21. Thin Slicing Blade
22. Thick Slicing Blade
23. Grating Blade
24. Blade Holder
25. French Fry Disc Assembly
26. Spatula
27. Citrus Juice Filter
28. Juice Reamer
29. Juice Extractor Pusher
30. Juice Extractor Filter
31. Juice Extractor Lid
32. Whisk Head
10. Food Pusher
11. Food Processor Lid
12. Food Processor Bowl
13. Main Chopping Blade
14. Double Chopping Blade
15. Chopping Blade Protective
Cover
Fig. 24
33. Whisk Beater
34. Whipper
35. Coffee Grinder Lid
36. Coffee Grinder
16. Dough Blade
17. Blade Storage
CAUTION: To prevent spilling (overflow) do NOT operate the
blender with than 4 cups (1000 ml) of soft liquid (i.e. soup)
at one time.
Fig. 25
Technical Specifications
Voltage:
Power:
Food Processor Capacity:
Blender Capacity:
*
*
Always operate the blender with the blender lid in place.
120V., 60Hz.
When blending hot liquids, always remove the small measuring cap in the blender
lid.
800 Watts
*
*
Avoid contact with moving parts at all times.
5 Cups (1.25 Liters)
6 Cups (1.5 Liters)
Keep hair, clothing as well as spatulas and other kitchen utensils out of the blender
jar while in operation to reduce the risk of severe injury to persons or damage to the
blender. A spatula may be used but ONLY when the unit is not in use.
10
3
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Using The Double Chopping Blade
Speed Control Dial
Using the Whisk Head & Whisk
Beater
Whipper Attachment
Always disconnect unit from power
source before cleaning or changing
accessories.
The food processor and blender
speed control dial has speeds settings
as follows: (Fig. 1)
CAUTION: Make sure that the unit is
unplugged from the power source
and the speed control dial is in the
“OFF” position before inserting or
removing attachments.
CAUTION: Make sure that the unit is
unplugged from the power source
and the operating button is “OFF”
before inserting or removing
attachments.
1. Make sure that the blade storage
cover is closed during use.
2. Fit the processor bowl and spindle as
described previously on page 4.
3. Click the whisk beater into the short
extension of the whisk head. (Fig. 15)
4. Place the long extension of the
whisking head onto the motor shaft.
(Fig. 16)
5. Add ingredients to the bowl.
6. Fit the lid and click into place as
detailed in the “Setting Up” section
(page 4). (Fig. 17)
WARNING: USE EXTREME CAUTION
WHEN HANDLING THE BLADES.
THEY ARE EXTREMELY SHARP
Off/Slow Start - 9 +
Max
Pulse/Turbo
The speed can be
adjusted while the
1. Fit the processor bowl on the unit.
2. Insert the whipper attachment and
press firmly into place. (Fig. 18)
3. Place the ingredients into the bowl.
4. Fit the lid and click into place as
described in the “Setting Up” section
(page 4).
5. Insert the food pusher and then plug
in the food processor.
6. Turn the food processor on selecting
high speed.
Note: The double chopping blades are
stainless steel TiN coated.
Always remove the chopping blade
protective cover(s) before using.
The double chopping
blade may be
food processor is
in use.
Fig. 1
Use of the Pulse/Turbo button allows
greater control over the texture of the
food being processed. Use "Pulse"
when the unit is in the "Off" position.
Use "Turbo" when the unit is in the
"On" position and you need a burst of
power. Please note that the "Pulse"
and "Turbo" is only intended to be
used for short "bursts" of processing.
used with one
blade or with
two blades.
Fig. 3
7. Recommended speed
for whipping is high.
8. Remove the whipper
1. To use as
a double
blade, carefully
slip the separate
blade over the
shaft of the
Double
Blade
attachment from
the bowl before
removing the
whipped ingredients.
7. Plug the processor into the wall outlet.
8. Turn the processor on selecting
maximum speed.
Operating the Food Processor
Setting up:
Main Blade
main blade.
(Fig. 3 & Fig. 4)
1. CAUTION: Make sure that the unit is
unplugged from the power source and
the the Speed control dial is in the
"Off" position before inserting or
removing any attachments and before
cleaning.
For your safety, the pusher must stay
in its place while operating the
appliance. Keep hands, hair, clothing
as well as spatulas and other utensils
away from beaters during operation to
reduce the risk of injury and/or
damage to the appliance.
FOR SAFETY, ALWAYS
LEAVE THE PUSHER IN
PLACE WHILE OPERATING THE
PROCESSOR.
Fig. 18
Fig. 4
Operating the Coffee Grinder
CAUTION: Make sure that the unit is
unplugged from the power source
and the Speed Control Dial is in
the "Off" position before inserting
or removing any attachments and
before cleaning.
1. Place the food processor bowl onto
the processor body. When fitted
correctly, the handle will fit into the
slot at the base of the unit.
2. Place the food processor bowl onto
the processor body. There is no need
to turn the bowl. (Fig. 2)
3. When fitted correctly, the handle will
fit into the slot at the base of the unit.
IMPORTANT WARNING: NEVER USE
THE WHISK ATTACHMENT FOR
DOUGH KNEADING.
Two Blades
Together
DO NOT IMMERSE THE WHISK
HEAD IN ANY LIQUID.
To clean the whisk beater, remove it
from the whisk head and wash.
Wipe the whisk head clean with a
damp cloth.
2. Then insert onto the shaft of the
processor bowl. Always hold the
chopping blade by the upper plastic
part. (Fig. 5)
2. Place the food processor lid on the
bowl and lock into place by turning
counter clockwise. Make sure that
no attachments are inside the food
processor bowl when you are using
the coffee grinder.
3. Open the safety cover by pressing
on the safety cover release button.
(Fig. 19)
Fig. 2
4. Now you are ready to use any of the
attachments that come with the unit;
i.e. the double chopping blade, dough
blade, etc.
Fig. 15
Fig. 16
Fig. 5
Fig. 17
Fig. 19
4
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Juice Extractor
3. Place ingredients to be processed in
the bowl.
7. Keep hands and utensils away from
the cutting blades while chopping
food to reduce the risk of severe
injury to persons or damage to the
food processor. A scraper may be
used, but ONLY when the food
processor is NOT running and has
been unplugged. Never feed food by
hand. Always use the food pusher.
(Fig. 8)
CAUTION: Make sure that the unit is unplugged from the power
source and the operating button is “OFF” before inserting or
removing attachments.
4. Then holding the processor lid by the
feeding tube, place the processor lid
onto the bowl and turn counter
clockwise to lock the lid in place.
Ensure that the lid tab has "clicked"
into place and that the arrow on the
lid is aligned with the dot on the unit.
(Fig. 6 & Fig. 7)
1. Fit the processor bowl as detailed in the manual (page 4).
2. Fit the juice extractor/filter into the processor bowl.
3. Fit the juice extractor lid over the extractor and rotate counter
clockwise ensuring that the lid tab has clicked into place.
4. Plug in the food processor.
5. Turn speed control to low (use only on low speed).
6. Use the juice extractor pusher to add fruit into the food tube.
7. If the juice extractor becomes clogged during use, turn the
processor off and remove the juice extractor. The excess pulp
can now easily be removed using the spatula.
Fig. 8
Be sure to switch the appliance to “OFF” position after each use.
Make sure the motor stops completely and unplug the unit before
disassembling.
Fig. 7
8. When finished processing the
ingredients, remove the processor lid
by turning clockwise.
9. Remove the chopping blade first
before removing the processed food.
FOR SAFETY, ALWAYS USE THE
FOOD PUSHER WHEN PUTTING
FOOD INTO THE THE FEEDER TUBE.
NEVER FEED BY HAND.
10. Do NOT leave the appliance
unsupervised when it is in the "ON"
position.
Fig. 6
FOR SAFETY, ALWAYS USE THE PUSHER WHEN PUTTING
FRUIT INTO THE FEEDER TUBE - NEVER FEED BY HAND.
Do not put your fingers or other objects into the juicer opening
while it is operation. If food becomes lodged in the opening, use
food pusher or another piece of fruit or vegetable to push it down.
When this method of removing food lodged in the opening is not
possible, turn the motor off, unplug unit and disassemble juicer to
remove the remaining food.
5. Plug the food processor into a wall
outlet.
6. Turn the speed control dial to the
desired speed setting.
Citrus Juice Filter
WARNING: ALWAYS OPERATE THE JUICER AT LOWEST SPEED ONLY. DO
NOT OPERATE THE CITRUS JUICER AT HIGHER SPEEDS.
CAUTION: Make sure that the unit is unplugged from the power source and the
operating button is “OFF” before inserting or removing attachments.
PROCESSING EXAMPLES WITH THE DOUBLE CHOPPING BLADES
The processing times indicated below are approximate and also depend on the
quantity of the food to be processed and the degree of fineness you require.
1. Fit the processor bowl
as detailed in manual
(page 4).
2. Fit the citrus juice filter
into the processor bowl
4. Insert the juice reamer into the
center of the citrus juice filter
with its shaft inside the central
column of the bowl.
RECOMMENDED
SPEED
OPERATION
TIMES
PRODUCT
Meat*
QUANTITY
24.5 oz / 700 gr.
24.5 oz / 700 gr.
21 oz / 600 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
4 slices
Max.
5-6
15 - 30 seconds
15 - 30 seconds
15 - 30 seconds
15 - 30 seconds
15 - 30 seconds
20 seconds
Onions
Nuts
8-Max.
Slow Start-8
Slow Start-8
Slow Start-8
6-8
3. Rotate counter
clockwise. Ensure that
the citrus juice filter tab
has clicked into place.
Fish*
Cheese
Liquids (soups)
Carrots
Bread
5. Plug in processor.
6. Place fruit on juice reamer and hold
with a cupped hand.
40-50 seconds
40 - 50 seconds
10 - 30 seconds
10 seconds
7. Operate at lowest speed.
WARNING: ALWAYS OPERATE THE
JUICER AT LOWEST SPEED
ONLY. DO NOT OPERATE THE
CITRUS JUICER AT HIGHER
SPEEDS.
6-8
Apples
24.5 oz / 700 gr.
Max 4 bundles
Max 4 cups/1 liter
8-Max.
Max.
Parsley
Mayonnaise
8-Max.
30 seconds
* Always allow food to cool before placing in the bowl.
* Remove all bones before processing.
* Always remove the chopping blades protective covers before using.
8
5
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Slicing, Shredding & Grating
Blades
4. Fit the lid and click into place as
Dough Blade
French Fry Blade Assembly
CAUTION: Make sure that the unit is
unplugged from the power source and
the operating button is “OFF” before
inserting or removing attachments.
Note: The French Fry Blade is already
assembled to the blade holder. Do not
try to remove it. (Fig. 13)
1. Make sure that the blade storage
cover is closed during use.
2. Fit the processor bowl and spindle
as detailed previously.
3. Using the finger holes in the French Fry
blade holder, fit it over the spindle and
press firmly into place as indicated.
(Fig. 14)
WARNING: USE EXTREME CAUTION
WHEN HANDLING BLADES. BLADES
ARE SHARP.
indicated in Setting Up section
(page 4).
5. Plug in the processor.
6. WARNING: USE THE FOOD
PUSHER TO ADD FOOD INTO THE
PROCESSOR BOWL THROUGH
THE FEEDER TUBE.
CAUTION: Make sure that the unit is
unplugged from the power source and the
operating button is “OFF” before
inserting or removing attachments.
1. Make sure that the blade storage cover
is closed during use.
CAUTION: Make sure that the unit is
unplugged from the power source and
the operating button is “OFF” before
inserting or removing attachments.
1. Make sure that the blade storage
cover is closed during use.
2. Fit the processor bowl and spindle as
described previously on page 4.
3. Fit the dough blade over the spindle and
press firmly into place. (Fig. 9)
4. Place the ingredients into the bowl.
5. Fit the lid and click into place as
described in the “Setting Up” section
(page 4).
6. Plug in the food processor.
7. Turn the food processor on selecting
high speed. Maximum capacity for
processing dough is based on the
mixture of 21 oz. (600 g.) of flour and
14 oz. (400 g.) of water in order to
obtain 2.2 Lbs. (1 kg.) of dough.
8. Recommended speed for making dough
is high.
9. When it is time to knead the dough,
place speed control dial in the "Off"
position and pulse until the dough it is
ready.
2. Place the blade of your choice on
the blade holder. Inserting the longer
tab on the side of the blade first.
(Fig. 10)
3. Press the other end of the blade until
it clicks into place. (Fig. 11)
4. Fit the processor bowl and spindle
as detailed on the page 4.
5. Using the finger holes in the blade
holder, fit it over the spindle and
press firmly into place as indicated.
(Fig. 12)
Do not overload the bowl. In one
operation, you can process a
maximum 5 cups (1250 ml) of food.
Fig. 13
WARNING: USE EXTREME
CAUTION WHEN HANDLING
BLADES. BLADES ARE SHARP.
6. Fit the lid and click into place as
described in the Setting Up section
(page 4).
7. Plug in the food processor.
8. WARNING: USE THE FOOD
PUSHER TO ADD FOOD INTO
THE PROCESSOR BOWL
Fig. 14
Processing Examples
10. Remove the blade from the bowl before
removing the dough.
Blade A
Blade B
Blade C
Blade D
Blade E
THROUGH THE FEEDER TUBE.
Do not overload the food processor bowl.
In one operation, you can process a
maximum of 5 cups (1250 ml) of food.
WHEN KNEADING DOUGH, DO NOT
OPERATE THE MACHINE LONGER THAN
20 SECONDS. AFTERWARDS WAIT AT
LEAST 2 MINUTES BEFORE OPERATING
THE MACHINE AGAIN.
FOR SAFETY, ALWAYS LEAVE THE
PUSHER IN PLACE WHILE OPERATING
THE PROCESSOR.
For fine slicing:
Blade A - Recommended speed level is MAX
(Cucumbers, raw potatoes, lettuce, carrots)
For coarse slicing:
For fine shredding:
Blade B - Recommended speed level is MAX
(Cabbage, carrots, onions)
Blade C - Recommended speed level is MAX
(Carrots, cucumbers, cabbage)
For coarse shredding: Blade D - Recommended speed level is MAX
(Lettuce, carrots, apples)
For Grating:
Blade E - Recommended speed level is MAX
Fig. 10
Fig. 11
Fig. 9
Fig. 12
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|