FOOD PROCESSING CENTER
OWNER’S MANUAL
Model BP101H
120V., 60Hz., 800 Watts
For information or assistance:
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.: 800-798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING & MAINTENANCE
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
Read Instruction Manual Before Use
CAUTION: Make sure that the unit is unplugged from power source and control
button is on “OFF” before inserting or removing any attachments and
before cleaning.
1. Read all instructions before using
the appliance. It is suggested
that you keep these instructions
in a safe place for future
9. Do not use outdoors.
10. Do not let cord hang over edge of
table or counter or touch hot
surfaces.
11. Keep hands and utensils away
from moving blades or discs
while processing food to reduce
the risk of severe injury to
persons or damage to the food
processor. A scraper may be
used but must be used only when
the food processor is not running.
12. Blades are sharp. Handle
carefully. When handling the
chopper blade always hold it by
the plastic hub.
13. To reduce the risk of injury, never
place cutting blades or discs on
the base without first putting bowl
properly in place.
14. Be certain cover is securely
locked in place before operating
appliance.
15. Never feed food by hand. Always
use food pusher.
16. Do not attempt to by-pass the
cover interlock mechanism.
17. Always operate food processor
with the cover in place.
Re-settable Thermal Safety
1. Turn the “ON/OFF” speed control
Device
to the “OFF” position
Your Bravetti Platinum Pro Food
2. Unplug the unit from the wall
Processing Center has been designed
receptacle.
reference.
2. Your voltage must correspond to
the voltage printed on the bottom
of the appliance.
3. To protect against electrical
shock, do not immerse the motor
housing (base), cord, or plug in
water or other liquid.
4. Close supervision is necessary
when the appliance is used by or
near children.
5. Unplug appliance from outlet
when not in use, before putting
on or taking off parts and before
cleaning.
with a unique safety system which
3. Remove and empty the processor
prevents damage to the unit’s motor
bowl. Ensure that no food is
and drive system, should you
jamming the cutting blades or
inadvertently overload your appliance.
attachments.
The safety system will automatically cut
4. Allow the appliance to cool down
the electric power to the appliance
for a minimum of 30 minutes.
when the device senses an overload or
5. Re-install the processor bowl and
excessive temperature in the motor or
re-plug appliance in the wall outlet.
drive system. Should this occur during
6. Proceed to use the appliance as
use and the appliance stops
before. Should the appliance still
functioning, following is the re-setting
fail to operate, turn the “ON/OFF”
procedure:
speed control to the “OFF” position
and unplug from the wall outlet.
Allow the appliance to cool down
for an additional 1 to 2 hours. After
this time has passed, repeat the
restart procedure, steps 5 and 6
above.
6. Avoid touching moving parts at
all times.
7. Do not operate the appliance with
a damaged cord or plug, or after
the appliance malfunctions, has
been dropped or damaged in any
manner. Return the appliance to
EURO-PRO Operating LLC for
examination, repair, electrical or
mechanical adjustment.
8. The use of attachments including
canning jars not recommended
by the manufacturer may cause
fire, electric shock or injury to
persons.
18. Always operate the blender with
the cover in place.
19. When blending hot liquids, remove
the center piece of the two-piece
blender cover.
IMPORTANT NOTICE
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electrical shock, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify the plug in any way.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
REV. 06/03C
1
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations! As the owner of a new BRAVETTI PLATINUM PRO Food
Processing Center, you are about to use a very versatile and powerful kitchen
appliance that will quickly become an indispensable item in your kitchen. BRAVETTI
PLATINUM PRO products are engineered to meet the highest quality standards and
are designed to offer the ultimate in ease of operation and convenience.
CLEANING & MAINTENANCE
CAUTION: Make sure that the unit is unplugged from power source and control
button is on “OFF” before inserting or removing any attachments and
before cleaning.
IMPORTANT INFORMATION
•
•
•
•
Never immerse the unit, cord or plug
in water or any other liquid.
Clean the main unit with a damp
cloth only.
Only the stainless steel blades can
be washed in the dishwasher.
All other parts can be cleaned in
warm sudsy water using regular
dishwashing liquid.
If food has spilled over on to the
main unit, use the pointy end of the
spatula to clean the cracks and
crevices of the base under the food
processor bowl. (Fig. 24)
To clean the blender, fill the blender
jar with warm, sudsy water, place
the blender lid on the unit and run
the blender at speed level "2" (high)
for 30 seconds. Rinse and repeat if
necessary.
Storing the Blades
Your Bravetti Platinum Pro Food
Processing Center comes with a blade
storage compartment and a cover to
store your blades when they are not in
use. (Fig. 25)
Please read all the following instructions carefully.
IMPORTANT
For your protection, the BRAVETTI PLATINUM PRO Food Processing Center has a
double safety switch so that it cannot run unless the food processor lid is locked in
place and either the safety cover or the blender is also locked in place.
Storage
Compartment
Storage
Cover
•
PLEASE NOTE
•
A. To operate the food processor, the safety cover must be properly locked in place.
B. To operate the blender, processor lid must be locked in place.
C. When operating blender make sure that all attachments are first removed from the
food processor bowl.
D. Do not attempt to use both blender and food processor at the same time.
E. Do not attempt to by-pass the cover safety interlock mechanism or the main lid
interlock.
Fig. 25
Place the blade
storage compartment
over the food
processor lid.
(Fig. 26)
Fig. 26
WARNING: Always
remove the blender and
close the safety cover
when using the food
processor.
Carefully insert the
blades into the slots.
(Fig. 27)
Fig. 24
Hints & Tips:
•
The double chopping blade can be
used for chopping meat, fish,
vegetables, cheese, etc. setting
the speed to maximum.
Fig. 27
•
•
For finer chopping, increase the
length of time you process.
For coarser chopping, use the pulse
button for a few seconds and monitor
food texture.
Pre-cut larger pieces to make them fit
into the feed tube. When chopping
hard foods (e.g. meat, cheese) cut
into 1 “/2.4 cm cubes.
For shredding, place food horizontally
into the feed tube, for slicing place the
food vertically.
Place the blade storage
cover over the blades.
(Fig. 28)
WARNING: The food
processor bowl must always be in
place with the food processor lid in
place when using the blender.
Please note that NO accessory
(i.e. blade or attachment) must be
•
Fig. 28
inserted inside the food processor
bowl when the blender is being
used.
No attachments
•
•
You can also store
the blender with
the unit as shown
in Fig. 29.
inside
When blending, pour the liquids in
first and then add the solid food.
Begin blending at the lower speed
and increase when needed.
IMPORTANT: Remove chopping blade protective
cover(s) before use. Protective blade cover(s) to be
Fig. 29
used only for storage.
2
11
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING TO KNOW YOUR FOOD PROCESSING
CENTER
OPERATING INSTRUCTIONS
Operating the Blender
Setting up:
1. CAUTION: Make sure that the unit is unplugged
from the power source and the the Speed
Control Dial is in the "Off" position before
inserting or removing any attachments and
before cleaning.
2. Place the food processor bowl onto the
processor body. (Fig. 19)
Fig. 19
3. When fitted correctly, the handle will fit into the
slot at the base of the unit.
4. Place the food processor lid on the bowl and
lock in place by turning counter clockwise.
(Fig. 20) Make sure that NO ATTACHMENTS
are inside the food processor bowl when you
are using the blender.
Fig. 20
5. Open the safety cover by pressing on the safety
cover release button. (Fig. 21)
6. Place the blender jar in the opening and turn
counter clockwise to lock in place. (Fig. 22)
7. WARNING: Never operate the blender without
the blender lid in place. When processing hot
ingredients, remove the measuring cap from the
blender lid to allow steam to escape. (Fig. 23)
8. Recommended speed level for blending is "2"
(high). When blending soft vegetables or fruits
start with level "1" (low) and then go to level "2"
(high). For hard vegetables or fruit always use
speed level "2" (high).
IMPORTANT: Do NOT load the blender with more
than 10 oz. (300 gr.) of hard vegetables at one
time. Do NOT operate continuously for more than
20 seconds at one time.
NOTE: You can crush 16 oz. (500 ml) of ice cubes
in the blender using the PULSE/TURBO button.
CAUTION: To prevent spilling (overflow) do NOT
operate the blender with than 4 cups (1000 ml) of
soft liquid (i.e. soup) at one time.
Fig. 21
1. Safety Cover
2. Safety Cover Release Button
3. Main Unit
4. Pulse/Turbo Button
5. On/Off Speed Control
6. Spindle
7. Blender Jar
8. Measuring Cap (1 oz.)
9. Blender Lid
18. Blade Storage Cover
19. Thin Shredding Blade
20. Thick Shredding Blade
21. Thin Slicing Blade
22. Thick Slicing Blade
23. Grating Blade
24. Blade Holder
25. French Fry Disc Assembly
26. Spatula
27. Citrus Juice Filter
28. Juice Reamer
29. Juice Extractor Pusher
30. Juice Extractor Filter
31. Juice Extractor Lid
32. Whisk Head
Fig. 22
10. Food Pusher
*
Always operate the blender with the blender lid
in place.
11. Food Processor Lid
12. Food Processor Bowl
13. Main Chopping Blade
14. Double Chopping Blade
15. Chopping Blade Protective
Cover
*
When blending hot liquids, always remove the
small measuring cap in the blender lid.
Avoid contact with moving parts at all times.
Keep hair, clothing as well as spatulas and
other kitchen utensils out of the blender jar while
in operation to reduce the risk of severe injury to
persons or damage to the blender. A spatula
may be used but ONLY when the unit is not in
use.
*
*
33. Whisk Beater
34. Whipper
16. Dough Blade
17. Blade Storage
Fig. 23
Technical Specifications
Voltage:
Power:
120V., 60Hz.
800 Watts
Food Processor Capacity:
Blender Capacity:
5 Cups (1.25 Liters)
6 Cups (1.5 Liters)
3
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Using The Double Chopping Blade
Speed Control Dial
Using the Whisk Head & Whisk
Whipper Attachment
Beater
Always disconnect unit from power
source before cleaning or changing
accessories.
WARNING: USE EXTREME CAUTION
WHEN HANDLING THE BLADES.
THEY ARE EXTREMELY SHARP
CAUTION: Make sure that the unit is
unplugged from the power source and
the speed control dial is in the “OFF”
position before inserting or removing
attachments.
The food processor and blender
speed control dial has speeds settings
as follows:. (Fig. 1)
Off/1-9 + Max
Pulse/Turbo
CAUTION: Make sure that the unit is
unplugged from the power source and
the operating button is “OFF” before
inserting or removing attachments.
1. Make sure that the blade storage
cover is closed during use.
2. Fit the processor bowl and spindle as
described previously on page 4.
3. Click the whisk beater into the short
extension of the whisk head. (Fig. 15)
4. Place the long extension of the
whisking head onto the motor shaft.
(Fig. 16)
5. Add ingredients to the bowl.
6. Fit the lid and click into place as
detailed in the “Setting Up” section
(page 4). (Fig. 17)
1. Fit the processor bowl on the unit.
2. Insert the whipper and press firmly into
place. (Fig. 18)
3. Place the ingredients into the bowl.
4. Fit the lid and click into place as
described in the “Setting Up” section
(page 4).
5. Insert the food pusher and then plug in
the food processor.
6. Turn the food processor on selecting
high speed.
7. Recommended speed for whipping
is high.
8. Remove the whipper from the bowl
before removing the whipped
ingredients.
FOR SAFETY, ALWAYS LEAVE THE
PUSHER IN PLACE WHILE OPERATING
THE PROCESSOR.
The speed can be
adjusted while the
food processor is
Always remove the chopping blade
protective cover(s) before using.
The double chopping
blade may be
used with one
Fig. 1
in use.
Use of the Pulse/Turbo button allows
greater control over the texture of the
food being processed. Use "Pulse"
when the unit is in the "Off" position.
Use "Turbo" when the unit is in the
"On" position and you need a burst of
power. Please note that the "Pulse"
and "Turbo" is only intended to be
used for short "bursts" of processing.
blade or with
two blades.
Fig. 3
1. To use as
a double
Double
Blade
blade, carefully
slip the separate
blade over the
shaft of the
Main Blade
7. Plug the processor into the wall outlet.
8. Turn the processor on selecting
maximum speed.
Operating the Food Processor
main blade.
(Fig. 3 & Fig. 4)
Setting up:
For your safety, the pusher must stay
in its place while operating the
appliance. Keep hands, hair, clothing
as well as spatulas and other utensils
away from beaters during operation to
reduce the risk of injury and/or
damage to the appliance.
1. CAUTION: Make sure that the unit is
unplugged from the power source and
the the Speed control dial is in the
"Off" position before inserting or
removing any attachments and before
cleaning.
2. Place the food processor bowl onto
the processor body. There is no need
to turn the bowl. (Fig. 2)
Fig. 4
Two Blades
Together
IMPORTANT WARNING: NEVER USE
THE WHISK ATTACHMENT FOR
DOUGH KNEADING.
DO NOT IMMERSE THE WHISK HEAD IN
ANY LIQUID.
3. When fitted correctly, the handle will
fit into the slot at the base of the unit.
2. Then insert onto the shaft of the
processor bowl. Always hold the
chopping blade by the upper plastic
part. (Fig. 5)
To clean the whisk beater, remove it
from the whisk head and wash.
Wipe the whisk head clean with a
damp cloth.
Fig. 18
Fig. 2
Fig. 15
4. Now you are ready to use any of the
attachments that come with the unit;
i.e. the double chopping blade, dough
blade, etc.
Fig. 16
Fig. 5
Fig. 17
4
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Using The Double Chopping Blade
7. Keep hands and utensils away from
the cutting blade while chopping
food., to reduce the risk of severe
injury to persons or damage to the
food processor. A scraper may be
used, but ONLY when the food
processor is NOT running and has
been unplugged. Never feed food by
hand. Always use the food pusher.
(Fig. 8)
Juice Extractor
CAUTION: Make sure that the unit is unplugged from the power
source and the operating button is “OFF” before inserting or
removing attachments.
(Cont.)
3. Place ingredients to be processed in
the bowl.
4. Then holding the processor lid by the
feeding tube, place the processor lid
onto the bowl and turn counter
clockwise to lock the lid in place.
Ensure that the lid tab has "clicked"
into place and that the arrow on the
lid is aligned with the dot on the unit.
(Fig. 6 & Fig. 7)
1. Fit the processor bowl as detailed in the manual (page 4).
2. Fit the juice extractor/filter into the processor bowl.
3. Fit the juice extractor lid over the extractor and rotate counter
clockwise ensuring that the lid tab has clicked into place.
4. Plug in processor.
5. Turn speed control to low (use only on low speed).
6. Use the juice extractor pusher to add fruit into the food tube.
7. If the juice extractor becomes clogged during use, turn the
processor off and remove the juice extractor. The excess pulp
can now easily be removed using the spatula.
Fig. 8
Be sure to switch the appliance to “OFF” position after each use.
Make sure the motor stops completely and unplug the unit before
disassembling.
Fig. 7
8. When finished processing the
ingredients, remove the processor lid
by turning clockwise.
9. Remove the chopping blade first
before removing the processed food.
FOR SAFETY, ALWAYS USE THE
FOOD PUSHER WHEN PUTTING
FOOD INTO THE THE FEEDER TUBE.
NEVER FEED BY HAND.
10. Do NOT leave the appliance
unsupervised when it is in the "ON"
position.
FOR SAFETY, ALWAYS USE THE PUSHER WHEN PUTTING
FRUIT INTO THE FEEDER TUBE - NEVER FEED BY HAND.
Do not put your fingers or other objects into the juicer opening
while it is operation. If food becomes lodged in the opening, use
food pusher or another piece of fruit or vegetable to push it down.
When this method of removing food lodged in the opening is not
possible, turn the motor off, unplug unit and disassemble juicer to
remove the remaining food.
Fig. 6
5. Plug the processor into a wall outlet.
6. Turn the speed control dial to the
desired speed setting.
Citrus Juice Filter
WARNING: ALWAYS OPERATE THE JUICER AT LOWEST SPEED ONLY. DO
NOT OPERATE THE CITRUS JUICER AT HIGHER SPEEDS.
CAUTION: Make sure that the unit is unplugged from the power source and the
operating button is “OFF” before inserting or removing attachments.
PROCESSING EXAMPLES WITH THE DOUBLE CHOPPING BLADE
The processing times indicated below are approximate and also depend on the
quantity of the food to be processed and the degree of fineness you require.
1. Fit the processor bowl
as detailed in manual
(page 4).
2. Fit the citrus juice filter
into the processor bowl.
4. Insert the juice reamer into the
center of the citrus juice filter
with its shaft inside the central
column of the bowl.
RECOMMENDED
SPEED
OPERATION
TIMES
PRODUCT
Meat*
QUANTITY
24.5 oz / 700 gr.
24.5 oz / 700 gr.
21 oz / 600 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
4 slices
Max.
5-6
15 - 30 seconds
15 - 30 seconds
15 - 30 seconds
15 - 30 seconds
15 - 30 seconds
20 seconds
Onions
Nuts
8-Max.
1-8
Fish*
3. Rotate counter
Cheese
Liquids (soups)
Carrots
Bread
1-8
clockwise. Ensure that
the citrus juice filter tab
has clicked into place.
5. Plug in processor.
6. Place fruit on juice reamer and hold
with a cupped hand.
1-8
6-8
40-50 seconds
40 - 50 seconds
10 - 30 seconds
10 seconds
7. Operate at lowest speed.
WARNING: ALWAYS OPERATE
THE JUICER AT LOWEST SPEED
ONLY. DO NOT OPERATE THE
CITRUS JUICER AT HIGHER
SPEEDS.
6-8
Apples
24.5 oz / 700 gr.
Max 4 bundles
Max 4 cups/1 liter
8-Max.
Max.
8-Max.
Parsley
Mayonnaise
30 seconds
* Always allow food to cool before placing in the bowl.
* Remove all bones before processing.
8
5
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Dough Blade
Slicing, Shredding & Grating
Blades
CAUTION: Make sure that the unit is
unplugged from the power source and
the operating button is “OFF” before
inserting or removing attachments.
4. Fit the lid and click into place as
French Fry Blade Assembly
CAUTION: Make sure that the unit is
unplugged from the power source and the
operating button is “OFF” before
inserting or removing attachments.
1. Make sure that the blade storage cover
is closed during use.
indicated in Setting Up section
(page 4).
5. Plug in the processor.
6. WARNING: USE THE FOOD
PUSHER TO ADD FOOD INTO THE
PROCESSOR BOWL THROUGH
THE FEEDER TUBE.
CAUTION: Make sure that the unit is
unplugged from the power source and
the operating button is “OFF” before
inserting or removing attachments.
Note: The French Fry Blade is already
assembled to the blade holder. Do not try
to remove it. (Fig. 13)
1. Make sure that the blade storage
cover is closed during use.
2. Fit the processor bowl and spindle
as detailed previously.
3. Using the finger holes in the French Fry
blade holder, fit it over the spindle and
press firmly into place as indicated.
(Fig. 14)
1. Make sure that the blade storage
cover is closed during use.
2. Place the blade of your choice on
the blade holder. Inserting the longer
tab on the side of the blade first.
(Fig. 10)
3. Press the other end of the blade until
it clicks into place. (Fig. 11)
4. Fit the processor bowl and spindle
as detailed on the page 4.
5. Using the finger holes in the blade
holder, fit it over the spindle and
press firmly into place as indicated.
(Fig. 12)
WARNING: USE EXTREME
CAUTION WHEN HANDLING
BLADES. BLADES ARE SHARP.
6. Fit the lid and click into place as
described in the Setting Up section
(page 4).
2. Fit the processor bowl and spindle as
described previously on page 4.
3. Fit the dough blade over the spindle and
press firmly into place. (Fig. 9)
4. Place the ingredients into the bowl.
5. Fit the lid and click into place as
described in the “Setting Up” section
(page 4).
6. Plug in the food processor.
7. Turn the food processor on selecting
high speed. Maximum capacity for
processing dough is based on the
mixture of 21 oz. (600 g.) of flour and
14 oz. (400 g.) of water in order to
obtain 2.2 Lbs. (1 kg.) of dough.
8. Recommended speed for making dough
is high.
9. When it is time to knead the dough,
place speed control dial in the "Off"
position and pulse until the dough it is
ready.
Do not overload the bowl. In one
operation, you can process a
maximum 5 cups (1250 ml) of food.
WARNING: USE EXTREME CAUTION
WHEN HANDLING BLADES. BLADES
ARE SHARP.
Fig. 13
Fig. 14
Processing Examples
10. Remove the blade from the bowl before
removing the dough.
Blade A
Blade B
Blade C
Blade D
Blade E
7. Plug in the processor.
8. WARNING: USE THE FOOD
PUSHER TO ADD FOOD INTO
THE PROCESSOR BOWL
THROUGH THE FEEDER TUBE.
Do not overload the food processor bowl.
In one operation, you can process a
maximum of 5 cups (1250 ml) of food.
WHEN KNEADING DOUGH, DO NOT
OPERATE THE MACHINE LONGER THAN
20 SECONDS. AFTERWARDS WAIT AT
LEAST 2 MINUTES BEFORE OPERATING
THE MACHINE AGAIN.
FOR SAFETY, ALWAYS LEAVE THE
PUSHER IN PLACE WHILE OPERATING
THE PROCESSOR.
For fine slicing:
Blade A - Recommended speed level is High
(Cucumbers, raw potatoes, lettuce, carrots)
For coarse slicing:
For fine shredding:
Blade B - Recommended speed level is High
(Cabbage, carrots, onions)
Blade C - Recommended speed level is High
(Carrots, cucumbers, cabbage)
For coarse shredding: Blade D - Recommended speed level is High
(Lettuce, carrots, apples)
For Grating:
Blade E - Recommended speed level is High
Fig. 9
Fig. 10
Fig. 11
Fig. 12
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|