OWNER’S MANUAL
Model BB301
120V~, 60Hz., 550 Watts
Electronic Blender
EURO-PRO Operating LLC
Boston, MA, 02465
1 (800) 798-7398
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT © EURO-PRO OPERATING LLC 2008
ASSEMBLING YOUR BLENDER
BLENDER PARTS AND CARE
BLENDER PARTS AND CARE
CAUTION: Follow these important steps to assemble, tighten, and
mount blender container quickly and correctly. INJURY MAY
RESULT IF MOVING BLADES ARE EXPOSED.
COVER
The cover for your blender consists of two parts, the plastic feeder
cap and the vinyl cover. The cover is self-sealing, and is made of
vinyl which is resistant to absorption of odors and stains. The
feeder cap is removable for use as a measuring cup and provides an
opening for the addition of other ingredients.
1. Turn container up-side down so the small opening is at the top.
2. Make sure that the sealed ring on container opening is tight.
HOW YOUR BRAVETTI BLENDER WORKS
Your blender is a multi-speed appliance which operates on a wide
range of speeds from very slow to very fast. This range of speeds
makes food preparation easy, interesting and also saves time because
your blender processes foods in seconds.
ALWAYS HOLD CONTAINER WITH ONE HAND WHILE
PROCESSING!
CONTAINER
The container for the blender is graduated for easy measurement
and is made of glass. The convenient handle and pouring lip permit
easy removal of liquid mixtures while thicker mixtures are more
easily removed through the bottom opening. The glass jar is
marked with indicators for convenient measuring.
LOW SPEED MODES includes PUREE, WHIP and MIX functions.
HIGH SPEED MODES include GRATE, BLEND and LIQUEFY
functions. By touching the control buttons, you can get the speed
mode you need.
PROCESSING ASSEMBLY
The processing assembly consists of three parts: a sealing ring used
as a cushion between the container and the agitator; agitator of
high-grade stainless steel; a threaded container bottom.
Another choice is PULSE to crush ice.
MOTOR AND MOTOR BASE
The powerful multi-speed motor is the heart of the appliance and is
designed just for this unit. It is completely enclosed within the
housing.
1. Follow assembly steps as described above.
2. Fill container with 2 cups of ice cubes.
3. Place lid assembly on container.
4. Spin the knob to the ICE CRUSH/PULSE position.
5. Ice can be crushed by continuously spinning the knob until
desired consistency is reached.
6. Let go of the knob and let it revert to the OFF position
automatically. Unplug appliance.
7. Remove container from blender base.
4
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DO'S AND DON'TS
DO:
DON'T:
• DON’T expect your blender to replace all of your kitchen
appliances. It will not: mash potatoes, whip egg whites or
substitutes for dairy toppings, grind raw meat, knead or mix stiff
dough, or extract juices from fruits and vegetables.
• Use only the line voltage and frequency as specified on the bottom
of the blender.
• Always operate blender on a clean, dry surface to prevent air from
carrying foreign material or water into the motor.
• DON’T process mixtures too long. Remember, the blender
performs its tasks in seconds, not minutes. It is better to stop and
check the consistency after a few seconds than to overblend and
have a mushy or too finely ground product.
• DON’T overload the motor with extra-heavy or extra-large loads.
If the motor stalls, turn off immediately, unplug cord from outlet
and remove a portion of the load before beginning again.
• DON’T attempt to remove blender container from motor base or
replace it until the motor has coasted to a complete stop. Blender
parts can be damaged.
• DON’T remove container cover while processing, as food
spillage can occur. Use feeder cap opening to add ingredients.
• DON’T place or store processing assembly on motor base
without first correctly assembling to blender container. Severe
injury can result if blender is accidentally turned on.
• DON’T use any utensil, including spatulas, in the container while
the motor is running. They can catch in the moving blades, break
the container and cause severe injury.
• Put liquid portions of recipes into blender container first unless the
instructions in recipes specify otherwise.
• Cut all firm fruits and vegetables, cooked meats, fish and seafoods
into pieces no larger, than 3/4" (1.8 cm) to 1" (2.5 cm). Cut all
kinds of cheeses into pieces no larger than 3/4" (1.8 cm).
• Use rubber spatula to push ingredients to be chopped into liquid
portion of recipe ONLY when motor is OFF.
• Place cover firmly on blender container before starting, and rest
hand on the container cover when starting and running motor.
• Remove heavy dips and spreads, nut butters, mayonnaise and
products of similar consistency by removing the processing
assembly and pushing the mixture out through the bottom opening
into serving dishes or storage container.
• Pour mixture if liquid or semi-liquid consistency, such as muffin
and cake batter,from blender container.
•
Allow cooked vegetables and broth to cool before pouring into
blender container for processing.
• DON’T use ANY container not recommended by manufacturer
for processing foods.
Switch to the next higher speed if the motor seems to labor when
processing at one of the lower speeds to prevent overloading of the
motor.
Other containers may break or loosen during processing and cause
severe injury.
•
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND CLEANING STEPS
CARE AND CLEANING OF YOUR BLENDER
1. Push the OFF button and unplug the appliance.
2. Grasp container handle and lift container from the
blender motor base. Rinse with water to remove any
large food particles that may have accumulated in the
container.
3. Reposition the container into the blender motor base.
4. Add 1 1/2 cups warm, soapy water to the container and
cover with the lid assembly.
5. Push one of the low settings for a few seconds.
6. Touch the OFF position and unplug the appliance.
7. Grasp container handle and lift container off of the
blender motor base. Remove lid and assembly and rinse
container with water. Repeat steps 1-7 as necessary.
8. Unscrew collar from container and remove cutting
assembly.
Blender container parts are corrosion resistant, sanitary and easily
cleaned. Before first use and after every use, separate container
parts and clean thoroughly in warm, soapy water, then rinse and
dry well. DO NOT WASH ANY PARTS IN AN AUTOMATIC
DISHWASHER.
Periodically check all parts before re-assembly. If the processing
blades are stuck or difficult to turn, DO NOT USE BLENDER.
Check by carefully turning the blades in a counter clockwise
direction (opposite edges are sharp). Blades should turn freely. If
the glass container is chipped or cracked DO NOT USE
BLENDER. Further use could result in the container breaking
during use. Use only Bravetti recommended replacement parts
available at an authorized service facility or the factory. USE OF
DAMAGED OR NON-RECOMMENDED PARTS COULD
RESULT IN SEVERE PERSONAL INJURY AND/OR
DAMAGE TO THE BLENDER.
CAUTION: BLADES ARE SHARP. HANDLE
CAREFULLY.
NEVER IMMERSE THE MOTOR BASE IN WATER. The
housing can be cleaned with a damp cloth (unplug first). The motor
is permanently lubricated and does not require any additional
lubrication. ANY SERVICING SHOULD BE PERFORMED
BY AN AUTHORIZED SERVICE FACILITY.
CAUTION: NEVER PLACE BLENDER MOTOR
BASE OF APPLIANCE IN WATER OR
OTHER LIQUIDS.
1. Immediately after each use, disassemble lid and cutting
assembly. Carefully wash all parts in warm soapy water.
Rinse and dry thoroughly. Do not wash parts in
dishwasher.
2. Do not use a harsh abrasive on any part of the blender.
3. Clean the exterior of blender motor base with a soft
damp cloth and dry.
4. Reassemble cutting assembly onto container. Place onto
blender motor base with lid assembly. Spin dry on
HIGH for 10 seconds.
Any servicing requiring disassembly other than the above cleaning
must be performed by an authorized service center. Failure to
follow this instruction may result in a fire, electric shock or injury
to persons.
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR NOTES AND RECIPES
BLENDING GUIDE
Your blender features a variable speed control. While you may select
any speed, the following list will help you determine where to set the
control for various items.
TO PROCESS FOOD
1. Assemble container.
2. Put ingredients into blender container, cover firmly, and place
container into ring on motor base.
SPEED SETTINGS
SPEED
ICE CRUSH
PUREE
FOODS
MIXING PROCEDURES
Slush, Margaritas
Crush ice cubes and add liquid
Baby Foods
Whipping Cream
Cream Soups
Cook Food, cool, add to blender
Add sugar gradually to desired taste
Add liquid, then soups, mix
WHIP
MIX
GRATE
BLEND
LIQUIFY
Cheese
Cut in cubes and grate
Add fresh fruit mixture
Yogurt and Fresh Fruit
Fresh Fruits
Liquefy fruits, add ice cream
10
9
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR NOTES AND RECIPES
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO OPERATING LLC warrants this product to be free from defects in material
and workmanship for a period of one (1) year from the date of purchase when utilized for
normal household use.
If your appliance fails to operate properly while in use under normal household
conditions within the warranty period, return the complete appliance and accessories,
freight prepaid. For Customer Service support, call 1 (800) 798-7398 or visit our website
or workmanship, EURO-PRO will repair or replace it free of charge. Proof of purchase
date and $9.95 to cover the cost of return shipping and handling must be included.*
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or
replacement of the unit at our option. This warranty does not cover normal wear of parts
and does not apply to any unit that has been tampered with or used for commercial
purposes. This limited warranty does not cover damage caused by misuse, abuse,
negligent handling or damage due to faulty packaging or mishandling in transit.
This warranty is extended to the original purchaser of the unit and excludes all other
legal and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if
any, is limited to the specific obligations expressly assumed by it under the terms of the
limited warranty. In no event is EURO-PRO Operating LLC liable for incidental or
consequential damages of any nature whatsoever. Some states do not permit the
exclusion or limitation of incidental or consequential damages, so the above may not
apply to you.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include
proof of purchase date and to attach tag to item before packing with your name,
complete address and phone number with a note giving purchase information,
model number and what you believe is the problem with item. We recommend you
insure the package (as damage in shipping is not covered by your warranty). Mark
the outside of your package “ATTENTION CUSTOMER SERVICE”.
yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
OWNERSHIP REGISTRATION CARD
FOR CANADIAN CONSUMERS ONLY
Please fill out and mail the product registration card within ten (10) days of purchase in
order to validate the foregoing Limited Warranty. The registration will enable us to
contact you in the unlikely event of a product safety notification. By returning this card
you acknowledge to have read and understood the instructions for use, and warnings set
forth in the accompanying instructions.
RETURN TO EURO-PRO Operating LLC, 4400 Bois Franc, St-Laurent, QC, H4S 1A7
BB301
______________________________________________________________________
Appliance model
______________________________________________________________________
Date purchased
Name of store
______________________________________________________________________
Owner’s name
______________________________________________________________________
11
Address
City
Province
Postal Code
Download from Www.Somanuals.com. All Manuals Search And Download.
|