| 	
		 Download from Www.Somanuals.com. All Manuals Search And Download.   
				Contents   
					Declaration   
					of Conformity   
					We, the offerer:   
					Bose® Corporation, The Mountain   
					Framingham, MA 01701-9168 USA   
					acknowledge our sole responsibility, that the product:   
					Kind of equipment:   
					Type designation:   
					Loudspeakers   
					201® and 301® Series V Direct   
					Reflecting® speakers   
					in accordance with EMC Directive 89/336/EEC and Article 10(1) of the Direc-   
					tive, is in compliance with the following norm(s) or document(s):   
					Technical regulations: EN50081-1, EN50082-1   
					Accredited by Bose Corporation   
					22 March 2002   
					Bose B.V., Nijverheidstraat 8   
					Nick Merks   
					2 
					 
				Setting Up   
					Before you begin   
					Unpack the carton   
					® 
					® 
					® 
					Your 201 or 301 Series V Direct/Reflecting speakers recreate a natural balance of reflected   
					® 
					and direct sound energy for an open, spacious performance. They are designed by Bose to   
					bring you high-quality listening pleasure.   
					These speakers are significantly different from conventional speakers, so be sure to read this   
					owner’s guide. It will help you set up and use your speakers properly, for the greatest enjoy-   
					ment.   
					Carefully unpack the carton and save all packing materials for possible future use. Check the   
					
					If either speaker appears damaged, do not use them. Instead, repack both speakers in the   
					original carton and notify your authorized Bose dealer immediately.   
					Note: Now is a good time to record the speaker serial numbers below and on your warranty   
					card.   
					CAUTION: To avoid danger of suffocation, keep the plastic bags that wrap these speakers out   
					of the reach of children.   
					Figure 1   
					What comes in the carton   
					201® series V speakers   
					301® series V speakers   
					For your records   
					Serial numbers are located on the back of each speaker.   
					Serial number: ____________________ and______________________________   
					Dealer name: _________________________________________________________   
					Dealer phone: ____________________ Purchase date ____________________   
					We suggest you keep your sales slip and warranty card together with this owner’s   
					guide.   
					3 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					 
					 
					 
				Setting Up   
					Select the locations for your 201® or 301® speakers   
					Bose® 201 and 301 speakers are designed to fit horizontally on a stable and level table or   
					
					Place the left and right speakers (marked on the back of each one) on the left and right sides   
					of your room, as you face them. Exactly where you put them depends on the size and style of   
					your room and where you think they sound best. Feel free to experiment to find a location   
					that is both convenient and provides the sound you prefer.   
					Note: Because the grilles on the front of each speaker protect the drivers inside, we recom-   
					mend that you do not remove them.   
					CAUTION: 201 and 301 speakers are designed specifically for placement on a stationary   
					shelf, table, or stand. On smooth surfaces like marble, glass or highly polished wood, vibra-   
					tions may cause the speakers to slide. So be sure to attach the self-adhesive rubber feet to   
					the bottom surface of each speaker for added stability and protection. The feet go in the cor-   
					ners of the flat surface, 1” back from the center of the curved front panel. Do not use these   
					speakers in a moving vehicle. To mount the speakers on a wall, use only the Bose WB-3 wall   
					4 
					 
					 
				Setting Up   
					Choose the cord   
					It is important to use the proper gauge (thickness) of speaker cord.   
					Wire recommendations   
					Based on a maximum frequency response deviation of ± 0.5 dB   
					Gauge   
					Length   
					18 (0.82 mm2)   
					20 ft (6 m)   
					16 (1.3 mm2)   
					14 (2.1 mm2)   
					30 ft (9 m)   
					50 ft (15 m)   
					Note: Before running the speaker cord through a wall or under a floor, check your local build-   
					ing code requirements and safety regulations. If necessary, contact an electrical installer for   
					this information.   
					Prepare the cord   
					Speaker cord consists of two insulated wires. The insulation around one wire is marked   
					(striped, collared, or ribbed).   
					At the ends of each cord, strip approximately 1⁄2 inch (12 mm) of insulation from both wires.   
					Twist the bare end of each wire so loose strands will not touch across terminals. Be sure to   
					connect each wire to the proper terminal (positive to positive and negative to negative).   
					Note: It is sometimes difficult to distinguish wire markings. Inspect both wires carefully.   
					5 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					 
					 
					 
				Setting Up   
					Make the connections   
					Just press the terminal tab on the back of each speaker to insert the appropriate wire (Figure   
					3).   
					CAUTION: Before making any connections, turn off your receiver and unplug it from the AC   
					power (mains) outlet. Not doing so may result in damage to your system.   
					CAUTION: Never use broken or frayed wiring, which can result in electrical shock or damage.   
					1. Connect one speaker cord to your right speaker.   
					• Attach each marked wire (+) to the appropriate (+) terminal.   
					6 
					 
					 
					 
				Using and Maintaining Your Speakers   
					Enjoying sound in a variety of ways   
					Your 201® or 301® speakers are designed to work with a variety of stereo receivers and ampli-   
					fiers as either front or rear channel speakers. The open, spacious performance of these   
					speakers makes them an ideal choice for home theater, or for listening to CD’s, tapes, or   
					
					Figure 4   
					301 and 201 series V   
					speaker sound path   
					301® series V   
					201® series V   
					Cleaning the speakers   
					Clean the surface of your speakers with a soft damp cloth. Do not use any sprays near the   
					system or allow liquids to spill into any openings. Also, do not use any solvents, chemicals, or   
					cleaning solutions containing alcohol, ammonia, or abrasives.   
					The speaker grille panels require no special care. You may vacuum them carefully to remove   
					dust.   
					7 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					 
					 
					 
				Reference   
					Troubleshooting   
					Problem   
					What to do   
					No sound   
					• 
					• 
					• 
					• 
					• 
					• 
					Make sure the receiver is plugged in and turned on.   
					Check to be sure the AC power (mains) outlet is working.   
					Disconnect any headphones plugged into the headphone jack.   
					Make sure the receiver is not set to MUTE.   
					Refer to the owner’s guide that came with your receiver.   
					
					tions” on page 6. Correct any connection errors.   
					No sound from one   
					speaker   
					• 
					• 
					Disconnect the working speaker from the receiver.   
					Switch the cord of the “faulty” speaker from its original receiver jacks to the other set of   
					jacks (the working speaker was originally attached to those jacks).   
					– If the speaker now works, the problem is in your receiver.   
					– If the speaker does not work, continue below.   
					• 
					• 
					Remove the cord from the working speaker and connect it to the “faulty” speaker and   
					either set of receiver jacks.   
					– If the speaker now works, the problem was in the original speaker cord.   
					– If the speaker does not work, the problem is in the speaker.   
					One speaker sounds dis-   
					torted   
					Follow the same procedure for the problem of no sound from one speaker, as outlined   
					above.   
					Not enough bass or treble   
					Customer service   
					Warranty period   
					If the troubleshooting guidelines above do not solve your problem, contact your authorized   
					Bose® dealer to arrange for service. To obtain information or service directly from Bose, see   
					the list of telephone numbers included with your speakers. Bose Corporation will make every   
					effort to correct any problem within the terms of your warranty.   
					Bose 201® and 301® series V Direct/Reflecting® speakers are covered by a limited transferable   
					warranty. Details of the coverage are provided on the warranty card that came with your   
					speakers. Please fill out the information section on your card, detach, and mail to Bose.   
					8 
					 
					 
				Reference   
					Technical information   
					Features   
					Direct/Reflecting® speaker technology   
					Stereo Targeting® tweeters   
					Tuned port enclosure   
					Syncom® computer quality control   
					Driver complement   
					201®: One 6.5-inch (16.5 cm) woofer. One 2-inch (5 cm) tweeter.   
					301®: One 8-inch (20 cm) woofer. Two 2-inch (5 cm) high-sensitivity tweeters.   
					Compatibility/impedance   
					201: Compatible with amplifiers and receivers rated from 10 to 120 watts per channel.   
					Rated 4 - 8 ohms   
					301: Compatible with amplifiers and receivers rated from 10 to 150 watts per channel.   
					Rated 4 - 8 ohms   
					Enclosure   
					Polymer and vinyl veneer over wood construction with black or light cherry finish.   
					Size/Weight   
					201: 8"H x 13 3⁄4"W x 8 5⁄8"D (20 cm x 35 cm x 22 cm).   
					Each speaker, unpacked: 11 lb (5 kg).   
					Speaker pair in shipping carton: 25.2 lb (11.4 kg).   
					301: 9 3⁄4"H x 14 1⁄4"W x 9 3⁄4"D (25 cm x 36 cm x 25 cm).   
					Each speaker, unpacked: 12.5 lb (5.7 kg).   
					Speaker pair in shipping carton: 28.7 lb (13 kg).   
					Optional accessories   
					Bose® FS-01 speaker stands and WB-3 wall mounting brackets are designed for use with 201   
					and 301 Series V Direct/Reflecting speakers. For information, or to order accessories, con-   
					tact your authorized Bose dealer. To contact Bose directly, see the list of telephone numbers   
					included with your speakers.   
					Figure 5   
					A. Bose FS-01 speaker   
					stand   
					B. WB-3 wall mounting   
					brackets   
					A.   
					B.   
					9 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					 
					 
				©2004 Bose Corporation   
					The Mountain, Framingham, MA 01701-9168 USA   
					264981-ENGvo AM Rev.02   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				® 
					® 
					® 
					® 
					Bose 201 and 301 Series V Direct/Reflecting Speakers   
					Notice d’utilisation   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Table des matières   
					Pour trouver…   
					Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					3 
					3 
					3 
					3 
					4 
					5 
					5 
					6 
					6 
					Avant de commencer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Déballage du carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Renseignements à conserver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Sélection de l'emplacement de vos enceintes 201® ou 301® . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Choix des câbles d’enceinte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Préparation des câbles d’enceinte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Raccordement des enceintes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Test des enceintes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Utilisation et entretien de vos enceintes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Différentes manières de profiter de ses enceintes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Nettoyage des enceintes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					7 
					7 
					7 
					Référence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Recherche de défaut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Service clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Durée de la garantie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Caractéristiques techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					Accessoires optionnels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
					8 
					8 
					8 
					8 
					9 
					9 
					©2002 Bose Corporation. Toute reproduction, modification, distribution ou autre utilisation, même partielle, de ce document est interdite sans autorisation écrite   
					préalable.   
					2 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Installation   
					Avant de commencer   
					® 
					® 
					® 
					Vos enceintes 201 ou 301 Direct/Reflecting série V recréent un équilibre naturel entre les   
					énergies sonores directes et réfléchies, afin d’obtenir une restitution large et ample. Elles ont   
					® 
					été conçues par Bose pour que vous profitiez pleinement d’un plaisir d’écoute de très haute   
					qualité.   
					Ces enceintes étant relativement différentes des enceintes conventionnelles, lisez   
					3 
					 
				Installation   
					Sélection de l’emplacement de vos enceintes 201® ou 301®   
					Les enceintes 201 et 301 Bose® sont conçues pour être positionnées horizontalement sur une   
					
					Placez les enceintes gauche/droite (LEFT/RIGHT) (repère à l’arrière de chacune d’elles) sur la   
					gauche et la droite de votre pièce, lorsqu’elle vous font face. Leur position exacte dépend   
					des dimensions et du style de votre pièce, ainsi que de l’endroit où vous pensez que le son   
					sera le meilleur. N’hésitez pas à procéder par essais successifs pour trouver la combinaison   
					adéquate entre la position des enceintes et le rendu sonore que vous préférez.   
					Remarque : Les grilles présentes en façade de chaque enceinte protégeant les haut-   
					parleurs, nous recommandons de ne pas les retirer.   
					ATTENTION : Les enceintes 201 et 301 sont conçues spécifiquement pour être placées sur   
					une étagère, une table ou un support fixe. Sur des surfaces lisses comme le marbre, le verre   
					ou le bois poli, les vibrations peuvent provoquer un glissement des enceintes. Afin de   
					renforcer la stabilité et la sécurité, fixer sous la base de chaque enceinte les patins   
					caoutchouc auto-adhésifs. Les patins s’installent dans les angles de la surface plane. Ne pas   
					utiliser ces enceintes dans un véhicule en mouvement. Pour fixer les enceintes sur un mur,   
					utiliser uniquement les supports muraux WB-3. Veuillez vous conformer aux instructions de   
					montage qui sont fournies avec ces supports. Des enceintes fixées de manière incorrecte   
					peuvent chuter, en provoquant des dommages et des blessures graves.   
					Voici quelques conseils de base :   
					• Laissez au moins 60 cm entre les enceintes et l’écran d’un téléviseur ou d’un moniteur.   
					• Laissez un espace d’au moins 45 cm entre l’arrière des enceintes et le mur devant lequel   
					elles sont placées.   
					Figure 2   
					Conseils de positionnement   
					45 cm   
					ou plus   
					Enceinte droite   
					30 cm   
					ou plus   
					Enceinte gauche   
					(LEFT)   
					1 à 4 m   
					ATTENTION : Pour que l’image sonore soit la plus réaliste possible, assurez-vous que   
					l’enceinte gauche est bien placée à gauche et que l’enceinte droite est bien placée à droite,   
					lorsqu’elles vous font face.   
					4 
					 
				Installation   
					Choix des câbles d’enceinte   
					Assurez-vous d’utiliser des câbles d’enceinte dont la section des conducteurs est   
					appropriée.   
					Recommandations relatives aux câbles   
					Basées sur une variation maximale de la réponse en fréquence de ± 0,5 dB.   
					Remarque : Avant de faire cheminer le câble d’enceinte dans un mur ou sous un plancher,   
					vérifiez les règles en vigueur concernant les travaux dans les bâtiments et la sécurité. Si   
					nécessaire, contactez un électricien à ce sujet.   
					Préparation des câbles d’enceinte   
					Le câble d’enceinte se compose de deux conducteurs isolés. La gaine de l’un d’eux est   
					rayée, annelée ou striée.   
					Pour chaque fil, dénudez environ 12 mm de gaine isolante à chaque extrémité des deux   
					câbles. Torsadez l’extrémité dénudée de chaque conducteur, de manière à ce qu’aucun brin   
					libre ne puisse provoquer un court-circuit entre les bornes de raccordement. Assurez-vous   
					de connecter chaque fil à la borne appropriée (positif au positif, négatif au négatif).   
					Remarque :   
					5 
				Installation   
					Raccordements des enceintes   
					Pressez simplement le poussoir des bornes de connexion présentes à l’arrière de chaque   
					
					ATTENTION : Avant d’effectuer une quelconque connexion, débranchez l’ampli/tuner de la   
					prise secteur murale. Dans le cas contraire, vous pouvez endommager votre système.   
					ATTENTION : Ne jamais utiliser de câbles détériorés ou dénudés, des risques de choc   
					électrique ou d’endommagement de votre système pouvant en résulter.   
					1. Raccordez un câble à votre enceinte droite.   
					• Branchez le conducteur repéré (+) sur la borne (+) adéquate.   
					• Branchez le conducteur repéré (–) sur la borne (–) adéquate.   
					2. Raccordez l’autre extrémité du même câble sur la sortie « RIGHT SPEAKER OUTPUT »   
					(sortie HP droite) de votre ampli/tuner.   
					• Branchez le conducteur repéré (+) sur la borne (+) adéquate.   
					• Branchez le conducteur repéré (–) sur la borne (–) adéquate.   
					3. Raccordez le second câble sur l’enceinte gauche et sur la sortie « LEFT SPEAKER   
					OUTPUT » (sortie HP gauche). Suivre les étapes 1 et 2 ci-dessus.   
					6 
					 
					 
					 
				Utilisation et entretien de vos enceintes   
					Différentes manières de profiter de ses enceintes   
					Vos enceintes 201® ou 301® sont conçues pour fonctionner avec un grand nombre d’ampli/   
					tuners et d’amplificateurs stéréo, soit comme enceintes avant, soit comme enceintes   
					arrières. Le rendu sonore large et ample de ces enceintes les rend idéales pour le Home   
					Cinema, ainsi que pour l’écoute de CD, de cassettes ou d’émissions de radio.   
					Figure 4   
					Diffusion sonore des   
					enceintes 301 et 201   
					série V   
					Enceintes 301® série V   
					Enceintes 201® série V   
					Nettoyage des enceintes   
					Nettoyez la surface des enceintes avec un chiffon doux et humide. N’utilisez aucun aérosol à   
					proximité du système et ne laissez aucun liquide pénétrer par une des ouvertures. De même,   
					n’utilisez pas de solvants, de produits chimiques ou de liquides de nettoyage contenant de   
					l’alcool, de l’ammoniac ou des abrasifs.   
					Les grilles d’enceintes ne nécessitent aucun entretien particulier. Vous pouvez les aspirer   
					avec précaution, afin d’en retirer la poussière.   
					7 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Référence   
					Recherche de défaut   
					Service clients   
					8 
				Référence   
					Caractéristiques techniques   
					Caractéristiques   
					Technologie d’enceinte Direct/Reflecting®   
					Tweeters Stereo Targeting®   
					Enceinte avec évent accordé   
					Contrôle qualité sur banc informatisé Syncom®   
					Informations complémentaires sur les haut-parleurs   
					201® : 1 woofer 16,5 cm / 1 tweeter 5 cm.   
					301® : 1 woofer 20 cm / 2 tweeters haute sensibilité 5 cm.   
					Compatibilité / Impédance   
					201 : compatible avec les amplificateurs et ampli/tuner dont la puissance est comprise entre   
					10 et 120 W par canal. Impédance 4 à 8 Ohms.   
					301 : compatible avec les amplificateurs et ampli/tuner dont la puissance est comprise entre   
					10 et 150 W par canal. Impédance 4 à 8 Ohms.   
					Coffret d’enceinte   
					Coffret en bois revêtu polymère et vinyle avec finition noir ou merisier clair.   
					Dimensions / Poids   
					201 : H 20 cm x L 35 cm x P 22 cm   
					Chaque enceinte, non emballée : 5 kg.   
					Paire d’enceintes en carton : 11,4 kg.   
					301 : H 25 cm x L 36 cm x P 25 cm   
					Chaque enceinte, non emballée : 5,7 kg.   
					Paire d’enceintes en carton : 13 kg.   
					Accessoires optionnels   
					Les pieds Bose® FS-01 et supports muraux WB-3 sont conçus pour être utilisés avec les   
					enceintes Direct/Reflecting 201 et 301 série V. Pour toute information complémentaire ou   
					commande d’accessoires, contactez votre revendeur Bose agréé. Pour contacter Bose   
					directement, reportez-vous à la liste des numéros de téléphone fournie avec vos enceintes.   
					Figure 5   
					A. Pied d’enceinte Bose   
					FS-01   
					B. Supports muraux WB-3   
					A.   
					B.   
					9 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				©2004 Bose Corporation   
					The Mountain, Framingham, MA 01701-9168 USA   
					264981-FRAvo AM Rev.02   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |