10 R - 02 0896
Download from Www.Somanuals.com. All Manuals Search And Download.
1. BUTTONS LOCATION AND FUNCTIONS
8
10
9
6
14
15
16
3
1
2
13
7
11
5
17
12
4
1. Panel Release Button
2. Power / Mute Button
3. CD Eject Button
4. Audio Button
1.Teclapararemoveropainelfrontal
2.TeclaLigar/desligar&TeclaMute
3.Teclaparaejetarodisco
4.Tecladeajustedeaudio
5.TeclaDisplay/informaçãoMP3-iD3
6.TeclaLocal/Distante
7.Teclasdememóriadeestações
8.FunçãoIX-BASS
9.TeclaSource
10.Controledevolume
5. Display Button / ID3 Information Button
6. Local / Distant Button
7. Preset Memory Buttons
8. iX-Bass Button
9. Source Button
10. Volume Knob
11. Automatically Store / Preset Scan Button
12. Band/Loudness Button / MP3 Enter Button
11.Memorizaçãoautomática(As)/PresetScan(Ps)
12.TeclaBanda/Loudness/MP3Enter
13.Teclasdesintonizaçãodeestações/mudançadefaixasdemúsica
14.TeclaEqualizadorpré-programado
15.Sensordocontroleremoto
13. Tuning Up/Down & Track Up / Down Buttons
14. Remote Control Receiver
15. Preset Equalizer Button
16. Aux In Jack
16.EntradaAuxiliar
17. USB Slot
17.EntradaUSB
1. Entriegel-Taste Bedienteil
2. Stumm-Taste / Einschalt-Taste
3. CD-Auswurftaste
1. Extracción del panel frontal
2. Silenciamiento rápido / Encendido/Apagado
3. Apertura del panel motorizado y expulsión del disco
4. Tecla Audio
4. Audio-Taste
5. Display-/ ID3-Taste
5. Selección información Display/ID3 TAG muestra
6. Botón Distancia/Local
7. Botones de estaciones memorizadas
8. Botón iX-Bass
9. Selección modos Radio/CD/Entrada auxiliar
10. Botón De Volumen
6. Local / Distant-Taste
7. Senderspeichertasten
8. iX-Bass-Taste
9. Source-Taste
10. Lautstärkenregler
11. AMS Taste / MP3 Suchlauf Taste
12. Frequenzband-Taste / MP3 Eingabe-Taste
13. Titel AUF / AB - Taste
14. Fernbedienungs-Taste
15. PEQ-Taste
16. Front-Audio-Anschluss
17. USB -Taste
11. Memorización Automática de emisoras
/ selección de memorias
12. Selector Bandas / Bajos/MP3
13. Botón de selección de emisoras & banda de música
14. Receptor de control remoto
15. Tecla de ecualización
16. Entrada de auxiliar
17.Entrada de USB
1. Tasto Rilascio Frontalino
2. Tasto Mute / Tasto Power
3. Tasto Eject
1. BoutonDeDéclenchementDuPanneau
2. BoutonD'assourdissement/BoutonD'alimentation
3. BoutonÉjectionD'unCd
4. BoutonDeSélectionAudio/EntréeDeMP3
5. BoutonD'écran/AffichageD'informationSurLesDisquesMP3
6. BoutonLocal/distant
7. BoutonsDesStationsPréréglées(m1~m6)
8. BoutonDeiX-Bass
9. BoutonDeRégime
10.BoutonDeVolume
4. Audio Controlla
5. Tasto Display/ID3 (informazioni)
6. Bottone Distante Locale
7. Tasti Stazioni Memorie Preimpostate
8. Bottone Bassi
9. Tasto Mode
10. Tasto Volume
11. Tasto Menu & AS/PS
12. Tasto Banda/Forte & Enter MP3
13. Tasto sintonizzazione su/gui & traccia su/gui
14. Destinatario di controllo remoto
15. Bottone di equilizzatore preprogrammato
16. Entrada Aux
11.BoutonDeStockageDesStationsDansLaMémoire
12.BoutonDeBande /EntréeDeMP3
13.BoutonDeRechercheDesStations/pistes:EnAvant/EnArrière
14.RécepteurDeLaCommandeÀDistance
15.BoutonDePEQ
16.AuxAJack
17. Entrada USB
17.USBSlot
Download from Www.Somanuals.com. All Manuals Search And Download.
This radio is equipped with the most advanced "TOUCH SENSE PANEL", so that it is easy and
convenient to use while driving.
Here are some tips to show you how easy it is to use this touch sense panel:
Tips
Using a very light touch on the radio panel will activate that feature. You will not need to
"PRESS"hardonthepaneltomakethisradiochangefeatures.
The power button along with some of the buttons that have dual functions, will need to be
"TOUCHED"from2to3secondstomakethechange.
The best area to "TOUCH" on the panel to make it activate is the illuminated or lighted area. For
example, just touch for 2 to 3 seconds the illuminated power symbol and the unit will turn on or
off.
Download from Www.Somanuals.com. All Manuals Search And Download.
2. HANDLING COMPACT DISCS
MOISTURE CONDENSATION
On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit.
Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for
aboutanhouruntilthemoisturehasevaporated.
NOTES ON DISCS
If you use the discs explained below, the
sticky residue can cause the CD to stop
spinning and may cause malfunction or
ruin your discs.
Do not use second-hand or rental CDs
that have a sticky residue on the surface
(for example, from peeled-off stickers or
from ink, or glue leaking from under the
stickers).
NOTES ON CDs
1.
A dirty or defective disc may cause sound
dropouts while playing. To enjoy optimum
sound, handle the disc as follows.
Handle the disc by its edge. To keep the
disc clean, do not touch the surface (P.1).
There are paste residue.
***
*******
*******
Ink is sticky (P.5).
*******
***
P. 5
P. 1
Do not use rental CDs with old labels that
are beginning to peel off.
Donotstickpaperortapeonthedisc(P.2).
2.
3.
Stickers that are beginning
**************
*******
*******
to peel away, leaving a
sticky residue (P.6).
*******
P. 6
P. 2
Do not use your CDs with labels or
stickers attached.
Do not expose the discs to direct sunlight or
heat sources such as hot air-ducts, or leave
them in a car parked in direct sunlight where
there can be a considerable rise in
*******
Labels are attached (P.7).
*******
*******
*******
*******
P. 7
temperature inside the car (P.3).
Do Not Use Special Shape CDs
Be sure to use round shape CDs only for
this unit and do not use any special shape
CDs. Use of special shape CDs may
cause the unit to malfunction.(P.8).
P. 3
4. Before playing, clean the discs with an
optional cleaning cloth. Wipe each disc from
the centre out (P.4).
P. 8
Be sure to use CDs with disc mark
CD-Rs and CD-RWs which have not
undergone finalization processing cannot
be played. (For more information on
finalization processing, refer to the manual
for your CD-R/CD-RW writing software or
CD-R/CD-RW recorder.) Additionally,
depending on the recording status, it may
prove impossible to play certain CDs
record on CD-R or CD-RW.
P. 4
5. Do not use solvents such as benzine,
thinner,commercially available cleaners, or
antistatic spray intended for analog discs.
E - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
3. INSTALLATION
Before finally installing the unit, connect the wiring temporarily and make sure it is all connected
upproperlyandtheunitandsystemworkproperly.
Use only the parts included with the unit to ensure proper installation. The use of unauthorized
partscancausemalfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or other
modificationsofthevehicle.
Installtheunitwhereit does notget in thedriver's way and cannotinjurethepassenger if thereis
asuddenstop, likeanemergencystop.
If installation angle exceeds 30° from horizontal, the unit might not give its optimum
performance.
30°
Avoid installing the unit where it would be subject to high temperature, such as from direct
sunlight, or from hot air, from heater, or where it would be subject to dust dirt or excessive
vibration.
Besuretoremovethefrontpanelbeforeinstallingtheunit.
DIN FRONT/REAR-MOUNT
Thisunitcanbepropertyinstalledeitherfrom“Front”(conventionalDINFront-mount)or“Rear”(DIN
Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details,
refertothefollowingillustratedinstallationmethodsAandB.
DIN FRONT-MOUNT (Method A)
Installation the unit
1
1. Dashboard
2. Holder
2
3
182
After inserting the half sleeve into the
dashboard, select the appropriate tab
according to the thickness of the
dashboard material and bend them
inwards to secure the holder in place.
3. Screw
53
1
7
6
1. Dashboard
2. Nut (5mm)
3. Spring washer
4. Screw (4x12mm)
4
5. Screw
6. Support Strap
5
2
Be sure to use the support strap to secure
the back of the unit in place. The strap can
be bent by hand to the desired angle.
7. Plain washer
3
E - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the unit
a
a. Frame
b. Insert fingers into the groove in the
front of frame and pull out to remove
the frame. (When re-attaching the
frame, point the side with a groove
down wards and attach it.)
c. Insert the levers supplied with the
unit into the grooves at both sides of
the unit as shown in figure until they
click. Pulling the levers makes it
possible to remove the unit from the
dashboard.
b
c
Trim Plate Installation:
Push the trim plate against the chassis until it is fitted.
You must do this before you install the front panel, otherwise it can't be attached.
DIN REAR-MOUNT (METHOD B)
Installationusingthescrewholesonthesides oftheunit.
Fasteningtheunittothefactoryradiomountingbracket.
1. Select a position where the screw
holes of the bracket and the screw
holes of the main unit become
aligned (are fitted) and tighten the
screws at 2 places on each side.
2. Screw
2
4
3. Factoryradiomountingbracket.
4. DashboardorConsole
5
5. Hook(Removethispart)
3
Note: the mounting box, outer trim ring,
and half-sleeve are not used for method
B installation.
2
5
E - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
4. DETACHABLE CONTROL PANEL (D.C.P.)
Removing The Detachable Control Panel (D.C.P.).
1. Turn the power off
2. Press the D.C.P. release button
3. Remove the D.C.P.
PANEL RELEASE
BUTTON
AttachingtheDCP
1. Attach the panel at the right side first, with
point B on the main unit touching point A on the
D.C.P. (Asshownonthedigram).
2
A
2. Then press the left side of D.C.P. onto the main
unituntila“click”soundisheard.
B
CAUTION
DONOTinserttheD.C.Pfromtheleftside. Doingsomaydamageit.
TheD.C.Pcaneasilybedamagedbyshocks. Afterremovingit, placeitinaprotectivecaseandbecarefulnot
todropitorsubjectittostrongshocks.
When the release button is pressed and the D.C.P is unlocked, the car's vibrations may cause it to fall. To
preventdamagetotheD.C.P, alwaysstoreitinaprotectivecaseafterdetachingit.
The rear connector that connects the main unit and the D.C.P is an extremely important part. Be careful not to
damageitbypressingonitwithfingernails, pens, screwdrivers, etc.
Note:
If the D.C.P is dirty, wipe off the dirt with soft,
dry cloth only. And use a cotton swab soaked
in isopropyl alcohol to clean the socket on the
back of the D.C.P.
Socket
E - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
ANTENNA CABLE INPUT
ANTENNENVERLÄNGERUNGSKABEL
CÂBLE D'EXTENSION D' ANTENNE
ENTRADA PARA CABO DE ANTENA
5. WIRING DIAGRAM (20 PIN HARNESS PLUG)
CABLE DE ANTENA
CAVO ANTENNA ESTENDIBILE
688A
FUSE
SICHERUNG
FUSIBLE
FUSíVEL
FUSIBLE
FUSIBILE
20-PIN AUDIO/POWER HARNESS (See Figure 1)
20-PIN AUDIO/STROM-KABELGESCHIRR
PLAQUE 20 FICHES AUDIO/ALIMENTATION
CONECTOR DE 20 PINOS PARA AUDIO
E
ALIMENTACAO
CONECTOR DE AUDIO POTENCIA DE 20 PIN
/
CONNETTORE ISO ( vedi figura 1)
RCA-TO-RCA CABLES
(not supplied)
RCA-TO-RCA-KABEL
(nicht geliefert)
CABLES RCA-TO-RCA
(non fournis.)
CABOS RCA RCA
A
WHITE
(não fornecidos)
WEISS
CABLES RCA RCA
(no incluidos)
CAVO RCA RCA
non fornito)
A
BLANC
BRANCO
BLANCO
BIANCO
A
(
AMP
RED/ROT/ROUGE/VERMELHO/ROJO/ROSSO
RCA-TO-RCA CABLES
(not supplied)
RCA-TO-RCA-KABEL
(nicht geliefert)
CABLES RCA-TO-RCA
(non fournis.)
Memory/Battery
Connect to constant 12 volt source. The radio will not work if this wire is not connected.
a
Geds/Batterie
CABOS RCA RCA
A
WHITE
(não fornecidos)
Verbinden Sie sich mit einer Konstanten 12 Voltquelle. Das Radio wird nicht funktionieren, wenn
diese Leitung nicht verbunden ist.
WEISS
CABLES RCA RCA
(no incluidos)
CAVO RCA RCA
non fornito)
A
BLANC
BRANCO
BLANCO
BIANCO
Mémoire/Pile
A
Connectez-vous à une source constante du volt 12. La radio ne fonctionnera pas si ce fil n'est pas
connecté.
(
Memória/Bateria
Conecte a uma fonte constante de 12V. O radio nao funcionara se este fio nao estiver conectado.
AMP
Memoria/Batería
Conecteaunorigenconstantede12volt.Laradionofuncionarásiestealambrenoestáconectado.
Memoria/ Batteria
RED/ROT/ROUGE/VERMELHO/ROJO/ROSSO
Collegatevi a una 12 sorgente di volt costante. La radio non lavorerà se questo filo non è collegato
YELLOW/YELLOW/YELLOW/AMARELO/AMARILLO/GIALLO
RED/RED/RED/VERMELHO/ROJO/ROSSO
Power antenna wire and remote turn on lead.
Treiben Sie Antennenleitung und entfernte Drehungsführung an.
Le fil de l'antenne de la puissance et l'éloignement mettent la conduite sous tension.
Fio Para Antena Eletrica.
BLUE/BLUE/BLUE/AZUL/AZUL/BLU
Impulse alambre de antena
y
turno remoto en liderazgo.
Il filo di potenza di antenna e il remoto accendono comando.
Accessory/Ignition
Zubehr/ Zündung
Accessoire/ Allumage
Acessorio Ignicao
Accesorio/ Ignición
L'accessorio/ L'accensione
-
Connect to
verbindet sich mit einer umgeschalteten 12 Voltquelle.
se Connecte une source commutée du volt 12.
Conecte uma fonte de 12V chaveada.
Conecta un origen conmutado de 12 volt.
si Collega una 12 sorgente di volt commutata.
a
switched 12 volt source.
-
Ground Connect to ground terminal or Clean unpainted metal part of chassis
Ground verbindet sich mit Bodenendstation oder reinigt nichtgestrichenen Metallteil von Chassis
Le Ground se Connecte au terminal de la terre ou Lave la partie non peinte du métal du chssis
BLACK/BLACK/BLACK/PRETO/NEGRO/NERO
-
à
/
-
a
Terra- Conecte Ao Terminal Negativo Ou
El Ground Conecta terminal de tierra
Il Ground si collega
A
Uma Superficie Metalica (sem Pintura) Do Chassi.
-
a
a
o
Completamente despintó parte metálica de chasis
-
a
a
terminale terrestre di parte di metallo non verniciare pulita di telaio
LEFTFRONT
LINKEVORDERSEITE
FACEAVANTGAUCHE
DIANTEIROESQUERDO
PARTEfrontalIZQUIERDA
PARTEanterioreSINISTRA
GREY-BLACK/GRAU-SCHWARZ/GRIS-NOIR/CINZA-PRETO
/GRIS-NEGRO/GRIGIO-NERO
RIGHTFRONT
WHITE-BLACK/WEISS-SCHWARZ/NOIR-BLANC/BRANCO-PRETO/BLANCO -NEGRO/BIANCO-NERO
WHITE/WEISS/BLAC/BRANCO/BLANCO/BLANCO
RICHTIGEVORDERSEITE
FACEAVANTDROITE
DIANTEIRODIREITO
PARTEFRONTALADECUADA
PARTEANTERIOREGIUSTA
GREY/GRAU/GRIS/CINZA/GRIS/GRIGIO
LEFT REAR
LINKE RÜCKSEITE
ARRIERE GAUCHE
VIOLET-BLACK/VIOLETT-SCHWARZ/VIOLET-NOIR/VIOLETA-PRETO
/VIOLETA-NEGRO/VIOLA-NERO
RIGHTREAR
RICHTIGERÜCKSEITE
ARRIEREDROIT
TRASEIRODIREITO
PARTEPOSTERIORADECUADA
RETROGIUSTO
GREEN-BLACK/GRÜN-SCHWARZ/VERT-NOIR/VERDE-PRETO/VERDE-NEGRO/VERDE-NERO
GREEN/GRÜN/VERT/VERDE/VERDE/VERDE
TRASEIRO ESQUERDO
PARTE POSTERIOR IZQUIERDA
RETRO SINISTRO
VIOLET/VIOLETT/VIOLET/VIOLETA/VIOLETA/VIOLA
CONECTOR DE AUDIO
/
POTENCIA 20 PIN
20-PIN AUDIO/POWER HARNESS
PLAQUE 20 FICHES AUDIO/ALIMENTATION
1
2
3
4
5
6
7
8
9
10
20
1
2
3
4
5
6
7
8
9
10
20
1
2
3
4
5
6
7
8
9
10
20
11
12
13
14
15
16
17
18
19
11
12
13
14
15
16
17
18
19
11
12
13
14
15
16
17
18
19
Figure
1
Pin View
Imagen
1
Vista de los Pin
Schéma
1
Vue des fiches
FONCTION MARQUE
/
FUNCI
FUNCTION/LABEL
FICHE COULEUR DU CABLE
PIN COLOR DE CABLE
PIN
WIRE COLOR
GREY/BLACK
GREY
RIGHT FRONT SPEAKER (-)
RIGHT FRONT SPEAKER (+)
RIGHT REAR SPEAKER (+)
RIGHT REAR SPEAKER (-)
1
2
3
4
5
6
7
8
GRIS/NOIR
GRIS
ENCEINTE AVANT DROIT (-)
1
2
3
4
5
6
7
8
GRIS/ NEGRO
ALTAVOZ FRONTAL DERECHO (-)
1
2
3
4
5
6
ENCEINTE AVANT DROIT (+)
ENCEINTE ARRIERE DROIT (+)
ENCEINTE ARRIERE DROIT (-)
GRIS
ALTAVOZ FRONTAL DERECHO (+)
ALTAVOZ TRASERO DERECHO (+)
VIOLETA
VIOLET
VIOLET
VIOLETA
/
NEGRO ALTAVOZ TRASERO DERECHO (-)
VIOLET
/
NOIR
VIOLET/BLACK
VERT
ENCEINTE ARRIERE GAUCHE (+)
ENCEINTE ARRIERE GAUCHE (-)
ALLUMAGE (ACC)
ALTAVOZ TRASERO IZQUIERDO (+)
GREEN
LEFT REAR SPEAKER (+)
LEFT REAR SPEAKER (-)
IGNITION(ACC)
VERDE
VERT/NOIR
ALTAVOZ TRASERO IZQUIERDO (-)
IGNICIÓN (ACC)
VERDE
ROJO
/
NEGRO
7
8
9
GREEN/BLACK
RED
ROUGE
NOIR
9
10
11
SORTIE COMMUNE ARRIERE PRE-AMP
SORTIE PRE-AMP ARRIERE DROITE
ENCEINTE AVANT GAUCHE (+)
ENCEINTE AVANT GAUCHE (-)
9
10
11
NEGRO
ROJO
LINEA DE SALIDA PRE-AMP TRASERA
LINEA DE SALIDA PRE-AMP TRASERA DERECHA
ALTAVOZ FRONTAL IZQUIERDO (+)
BLACK
REAR PRE-AMP LINE OUT COMMON
ROUGE
BLANC
10
11
RED
WHITE
RIGHT REAR PRE-AMP LINE OUT
LEFT FRONT SPEAKER (+)
BLANCO
BLANCO
LEFT FRONT SPEAKER (-)
NOIR/BLANC
12
13
14
15
16
17
18
19
20
WHITE/BLACK
12
13
/
NEGRO
ALTAVOZ FRONTAL IZQUIERDO (-)
12
13
POWER ANTENNA
14
15
16
17
18
19
BLEU
PUISSANCE ANTENNE
BLUE
14
15
16
AZUL
ALIMENTACIÓN DE ANTENA
BATTERY(+)
BATTERIE (+)
YELLOW
BLACK
WHITE
RED
JAUNE
NOIR
AMARILLO
NEGRO
BATERÍA(+)
CHASSIS GROUND
CHASSIS TERRE
CHASIS DE TIERRA
LEFT FRONT PRE-AMP LINE OUT
RIGHT FRONT PRE-AMP LINE OUT
FRONT PRE-AMP LINE OUT COMMON
BLANC
ROUGE
NOIR
SORTIE AVANT GAUCHE PRE-AMPLI
SORTIE AVANT DROITE PRE-AMPLI
SORTIE AVANT COMMUNE PRE-AMPLI
SORTIE PRE-AMP ARRIERE GAUCHE
17 BLANCO
ROJO
SALIDA L. PREAMP FRONTAL IZQUIERD
SALIDA L. PREAMP FRONTAL DERECHA
SALIDA L. PREAMP FRONTAL COMUN
LINEA DE SALIDA PRE-AMP TRASERA IZQUIERDA
18
19
BLACK
WHITE
NEGRO
BLANC
LEFT REAR PRE-AMP LINE OUT
20
BLANCO
20
Conector de 20 pinos para audio
e
alimentação
20-PIN AUDIO/STROM-KABELGESCHIRR
IDENTIFICAZIONE PIN
1
2
3
4
5
6
7
8
9
10
20
1
2
3
4
5
6
7
8
9
10
20
1
2
3
4
5
6
7
8
9
10
20
11
12
13
14
15
16
17
18
19
11
12
13
14
15
16
17
18
19
11
12
13
14
15
16
17
18
19
Figure
1
Pin View
FIGURA
1
VISUALE PIN
COLORE CAVO
GRIGIO/NERO
GRIGIO
FUNZIONE
PIN
1
2
3
4
5
6
7
8
KABELFARBE
GRAU/SCHWARZ
GRAU
FUNKTION ETIKETT
/
PIN
ALTO-FALANTE DIANTEIRO DIREITO (-)
ALTO-FALANTE DIANTEIRO DIREITO (+)
CASSA ANTERIORE DESTRA (-)
CASSA ANTERIORE DESTRA(+)
CASSA POSTER. DESTRA (+)
CASSA POSTER. DESTRA (-)
1
2
3
4
5
6
7
8
9
RECHTER VORDERLAUTSPRECHER (-)
RECHTER VORDERLAUTSPRECHER (+)
RECHTER RÜCKLAUTSPRECHER (+)
RECHTER RÜCKLAUTSPRECHER (-)
VIOLA
VIOLETT
VIOLA/NERO
(-)
VIOLETT/SCHWARZ
VERDE
CASSA POSTER. SINISTRA (+)
CASSA POSTER. SINISTRA (-)
ACCENSIONE (TAKE OUT NIEZIONE)
MESSA A TERRA
GRÜN
LINKER RÜCKLAUTSPRECHER (+)
LINKER RÜCKLAUTSPRECHER (-)
ZÜNDUNG (ACC)
VERDE/NERO
ROSSO
GRÜN/SCHWARZ
ROT
IGNIÇÃO (ACC)
9
NERO
SCHWARZ
RÜCK-PRE-AMP-ANSCHLUSS -AUS
RECHTER RÜCK-PRE-AMP-ANSCHLUSS-AUS
LINKER VORDERLAUTSPRECHER (+)
LINKER VORDERLAUTSPRECHER (-)
SAÍDAPRE-AMPTRASEIRA(FIOCOMUM)
SAÍDA PRE-AMP TRASEIRA DIREITA
ALTO-FALANTE DIANTEIRO ESQUERDO (+)
ALTO-FALANTE DIANTEIRO ESQUERDO (-)
10 ROSSO
11 BIANCO
AMPLIFICATORE CASSA POST. DESTRA
CASSA ANTERIORE SINISTRA (+)
CASSA ANTERIORE SINISTRA (-)
10 ROT
11 WEISS
12 BIANCO/NERO
13
14 BLU
12 WEISS/SCHWARZ
13
14 BLAU
13
ANTENNA
MOTORISIERTE ANTENNE
BATTERIE (+)
ANTENA ELÉTRICA
BATTERIA(+)
15 GIALLO
NERO
15 GELB
SCHWARZ
16
MESSA A TERRA
16
GEHÄUSEERDUNG
MASSA (FIO TERRA)
17 BIANCO
ROSSO
USCITA FRONTALE SINISTRO PRE-AMP
USCITA FRONTALE DESTRO PRE-AMP
USCITA FRONTALE COMUNE PRE-AMP
17 WEISS
18 ROT
19 SCHWARZ
HINTERER VORVERSTÄRKERAUSGANG
RECHTERVORDERERVORVERSTÄRKERAUSGANG
VORDERERVORVERSTÄRKERAUSGANGNORMAL
BRANCO
VERMELHO
PRETO
SAIDA PRE-AMP FRENTE ESQ
SAIDA PRE-AMP FRENTE DIR.
SAIDA PRE-AMP FRENTE (FIO COMUM)
SAÍDA PRE-AMP TRASEIRA ESQUERDA
18
19
BLACK
BIANCO
AMPLIFICATORE CASSA POST. SX
20
20 WEISS
LINKER RÜCK-PRE-AMP-ANSCHLUSS
E - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
6. BASIC OPERATIONS
1) PANEL RELEASE BUTTON (REL)
Pressthisbuttontoremovethecontrolpanel.
13) POWER ON/OFF BUTTON (
)
Press the POWER button on the front of the unit to turn on the unit. Long press the POWER
button to turnOff theunit.
13) MUTE BUTTON (MUTE)
Short Press the MUTE button to mute the audio output, and “Mute” will appear on the
display. Press the mute button again to restore the audio output to the previous level.
11) DISP BUTTON(DISP)
Press this button briefly, the LCD will display the clock for about 5 seconds, then return to previous
displaymode.
2) ENCODER VOLUME KNOB
Turnthisknobtoadjustdesiredvolumelevel.
ꢀ
12) SOURCE BUTTON (SOURCE)
Press this button to select different mode , sequence as follow:
A) Tuner mode (Radio)
B) CDP / MP3 (only if a CD or MP3 disc is inserted)
C) USB (only if a USB drive is inserted)
D) SD / MMC (Only if a SD or MMC card is inserted)
E) AUX IN (optional, only if this unit with this features)
SOURCE PRIORITY
Whenever a USB or SD/MMC is being inserted, unit will automatically switch to USB or
SD/MMC mode, does not matter the unit is currently in what mode.
When in USB or SD / MMC mode, if the USB or SD / MMC is being removed, unit will
automatically switch to radio mode.
17) FRONT PANEL AUX-IN JACK
Connect the external signal to AUX in jack located at the front of the panel , then press Mode
button to select Aux mode. Press Mode Button again to cancel Aux Mode and return to previous
mode.
FRONT CABINET
2
AUX IN
LEFT TRACK
RIGHT TRACK
GROUND
AUX IN
RESET BUTTON
The RESET button is located on the main unit (as shown on the diagram). To press it vertically
with a ballpoint pen or metal object will activate it. The reset button is to be activated for the
following reasons:
Initialinstallationoftheunitwhenallwiringiscompleted.
Allthefunctionbuttonsdonotoperate.
Errorsymbolonthedisplay.
Note: If press RESET button, the unit still cannot function normally, please use a cotton swab
soakedinisopropyl alcoholtocleanthesocketonthebackofthecontrolpanel.
E - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
7. MENU OPERATIONS
To use this function keep press short AUDIO/MENU Button for few seconds, each time you press
this button the mode will move and the functions will shown on the display, turn the encoder volume
knob up/ down to set the desires functions ,the function states as following:
BASS ( Bass level )
Turn the encoder volume knob to adjust the desired Bass level range from -10 to +10, the
default is “0”.
TREBLE ( Treble level )
Turn the encoder volume knob to adjust the desired Treble level range from -10 to +10, the
default is “0”.
BALANCE
Rotate the encoder volume knob to adjust the Balance between the right and left speakers
from R10 to L10, the “C00” is default.
FADER
Rotate the encoder volume knob to adjust the Fader between the front and rear speakers
from F10 to R10, the “C00” is default.
TIME SET (CLK)
The time on the clock is set to “12:00” by default, Rotate the encoder volume knob to
adjust the minutes and hours.Press AUDIO/MENU button to select the hour or minute.
Note: Time format can not to set up, it should be follow the tunner area to change, when is
in U.S.A Latin then the time in 12H by default, when is in Europe Latin then the time in 24H
by default.
Programmable Turn-on Volume (P-VOL )
This option allows selection of the volume level the radio will automatically assume when
first turned on. " P - VOL 40 " is the default setting, which will turn the radio on at the volume
level selected when the unit was last turned off. To program a specific volume level for the
radio to turn on at, rotate the volume control to select "VOLUME LEVEL”. Within 5 seconds.
BEEP ON / OFF
Rotate the encoder volume knob to select Beep On / Off option.
Beep Off: disable audible beep tone when any function is accessed.
Beep On: enable audible deep tone.
16) PRESET EQUALIZER BUTTON (EQ)
PressthisbuttontotogglethefollowingEQsetting:
POP -> JAZZ -> CLAS -> BEAT ->ROCK ->DSP OFF
AtDSPOFFmode, EQwillbecontrolledbyBass/Treblesetting.
15) iX-BASS BUTTON
Press the iX-BASS button to switch the loudness on or off. When Loudness is on,display will
show ‘LoudOn’forafewseconds.
E - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
8. RADIO OPERATIONS
9) RADIO SIGNAL STRENGTH METER (RSLM)
This is use to indicate the signal strength of current radio station broadcast. When you
choose RADIO mode, it will show on the display.
Best reception
Worst reception
7) STATION PRESET BUTTONS (M1-M6)
1.Press these buttons briefly to recall the stored stations in the selected band.
2.Presetting stations manually, Press the BAND button to select the band for the station to
be preset. Use Tuning Up/Down to tune in the stations to be preset. Press the Preset
button at which you want to store the station for at least 2 second. The preset number will
appear on the display accompanied by a beep, this indicate that the station has been
stored into memory.
8) TUNING / SEEK UP AND TUNING / SEEK DOWN BUTTONS
1.Press these buttons briefly will operate AUTO SEARCH tuning mode, the radio will tune up or
downtothenextstationandremainonthefrequency.
2.Press these buttons more than 2 seconds, operate as MANUAL SEARCH buttons, under this
mode the tuning frequency will advance up or down rapidly when the button is pressed. If the
buttonsarenotpressedwithin 3seconds, theywillreturntoautosearchmode.
5) LOCAL/DISTANT BUTTON (LO/DX)
During station tuning, this button allows you prior to access strong local station only (Local
mode), or to access a wider range of using distant mode (DX). When power up DX mode
will be selected automatically; Press LOC button briefly to select Local mode and “LOCAL”
symbol on the LCD will light up for a few seconds.
10) AUTO MEMORY STORE/PRESET SCAN BUTTON (AMS)
1.PRESET SCAN: Press AMS button briefly enter Preset Scan mode, it will scan all the
preset stations in the memories, you can hear that will stay on each station for about 5
seconds.
2.AUTO MEMORY STORE: Press AMS button long to enter Auto Store mode, this feature
will automatically scan the current band and enter up to 6 strongest stations into the 6
preset memories. To stop Auto Store & Scan, press the AMS button again.
14) BAND BUTTON (BAND)
Press BAND button to change between Fm1, FM2, FM3 & AM/MWbands.
ꢀ
DUAL FREQUENCY SWITCH
Unit is defaulted in U.S.A frequency, if EURO frequency is required, a sharp pen is needed to
switch the button on the left side of the chassis to EURO frequency.
US EU
E - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
9.CD OPERATIONS
4) CD SLOT
InsertthediscintoCDslot. TheCDwillbegintoplay.
M1) PAUSE BUTTON (PAU)
PressthisbuttontopauseCDplay, pressagaintoreleasepause.
M2) SCAN BUTTON (INT)
Press this button, the first 10 seconds of each track will be played sequentially until this button
ispressedagain, thennormalplaywillresumeatthecurrenttrack.
M3) REPEAT BUTTON (RPT)
Pressthisbutton, thecurrenttrackwillbeplayedrepeatedlyuntilthisbuttonispressedagain.
M4) RANDOM PLAY BUTTON(RDM)
PressthisbuttontoplayalltracksonCDinrandom. Pressagaintodeactivateit.
6) EJECT BUTTON (
)
Press this button to eject the CD from the unit. The receiver will switches to radio mode
automatically.
8) TRACK UP AND TRACK DOWN BUTTON
Press the Track Up Button to skip to the next track or previous track. Press the Track Down
button during play will return to the beginning of the current track, press it one more time to
skip to previous skip. Press and hold Track Up/Down Button to fast forward or fast reverse. CD
playerstartswhenyoureleasethebutton.
E - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
PLEASE READ THIS INSTRUCTION CAREFULLY
BEFORE OPERATING THE UNIT
10. USB DRIVE OPERATIONS
COMPATIBILITY
Due to the fast changing technology world, this unit may or may not
be compatible to all the USB drive / device available with all the future
technology, especially those USB drive / device which require to
install a driver. Always choose a compatible USB drive / device which
is compatible with this unit.
P. 1
NOTE:
This unit is not compatible with portable Hard-Disk.
START THE USB DEVICE MODE
1.The USB socket is covered by the USB plastic cover as indicated in
picture 1 (P.1). Flip open the USB plastic cover, and the USB
socket will become accessible.
2. Plug in the USB drive / device completely as indicated in picture 2(P.2)
and display will show “USB PLAY” to indicate that the USB drive /
deviceisbeingpluggedincorrectly&thedownloadhasbegun.
NOTE:
The unit may take a while to detect or download the USB files, detect &
downloadtimemayvarydependsonthetypeof USBdrive/device.
3.Does not matter the unit is in what mode (TUNER, CD, SD/MMC,
etc), once a USB drive / device is being plugged into the unit, unit
will automatically switch to USB mode.
P. 2
4.All the USB files playback function is same as normal CD or MP3
disc playback.(Please refer to section CD operations & MP3
operations)
TO STOP USB PLAYBACK
1.The USB drive / device is unplugged, the unit automatically switch
to radio mode. Or user can use mode button to switch to other
mode.
P. 3
2.User can use the mode button to choose USB mode (only if USB
drive / device is inserted in the unit ) or any other modes, when they
are in any mode.
USB 1.1 > 320KBPS
FILE MANAGE: FAT12 / FAT16/ FAT 32
WARNING
1. Always unplugged the USB gently from the unit, excessive force
used will cause permanent & serious damage to the unit & the
USB drive / device.(P.3)
2. Please never intentionally or accidentally hit on the USB drive /
device when it is plugged in. This will cause permanent & serious
damage to the unit & USB drive / device.(P4)
P. 4
3. Please never try to plug in any USB drive / device with excessive
weight or excessive size into the unit. Please always use USB drive /
device with reasonable weight & size which will not overload the unit,
which will not make performing normal operation on the front panel
impossible. Excessive weight or size USB drive / device may cause
permanent & serious damage to the unit. And may cause access to
thebuttons/knobsonthefrontpanelimpossible.
E - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
11. SD/MMC OPERATIONS
1.Press panel release button to release the front panel.(P.1)
2.The SD/MMC card slot is located on the unit as indicated in (P.2).
3. Insert the SD/MMC card into the card slot in the correct direction until a “CLICK” sound
is heard.(P.3)
4.Close the front panel.(P.4)
P. 2
P. 1
P. 3
P. 4
Face
Up
Click
Detach the
Front Panel
Insert the SD/MMC Card
with Label up side
Push in till heard a “click”
Close the front Panel
5. The display will show “SD PLAY” to indicate that the SD or MMC card is correctly inserted.
Once the SD or MMC card is inserted, the MP3 file will automatically loaded & playback will
also start.
6. Does not matter the unit is in what mode (Tuner, CD, USB,etc), once a SD or MMC card
is being inserted in the unit, unit will automatically switch to SD / MMC mode.
7. All the SD / MMC files playback function is same as normal CD or MP3 disc playback.
(Please refer to section CD operations & MP3 operations)
TO STOP SD/MMC CARD PLAYBACK
1.Push on the end of the SD or MMC card to eject the sd or MMC card. Once the SD or MMC
card is taken out, the unit will automatically switch to previous mode.(P.5-P.6)
2.User can use the mode button to choose SD / MMC mode (only if SD or MMC is inserted in the
unit ) or any other modes, when they are in any mode.
P. 6
P. 5
Click
Push in till heard a “click”
Remove the Memory Card
WARNING
1.Please make sure to insert the SD or MMC card in the correct direction / orientation as
indicated in picture (P.7). Wrong insert will cause permanent & serious damage to the unit &
the SD or MMC card.
2. AlwaysmakesuretheSDorMMCcardiscompletelyinsertedbeforere-attachingthefrontpanel.
P. 7
Front side
Back side
E - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
12.MP3/WMA OPERATIONS(ENCODER VERSION)
Notes :
This unit support :
MPEG1/2/2.5/ Layer 2/3
WMA Version 7/8/9
Sampling frequency
- MPEG1
- MPEG2
- MPEG2.5
- WMA
: 32/44.1/48 KHz
:16/22.05/24 KHz
: 8/11.025/12KHz
: 22/32/44/48KHz
Sampling But rate
- MP3/WMA
: 32~320Kbps & VBR
CDROM Mode 1 / 2
ISO9660 Level 1 / 2 & Joliet(unicode)
Max File/DIR. Count : 255
Max DIR. Depth : 255
Sorting Method : Tree sorting
Max File/DIR. Name : 64Byte
ID3 V1.0/1.1/2.0/2.3(Max 32Byte)
- An MP3 directory is shown in this manual as “Directory”, and an MP3 file is shown as “Track”.
- Maximum length of file name : 28 characters.
- Maximum length of directory : 16 characters.
- Supports Multi-Session recording.
- Supports CD, CDR and CDRW.
- Disc written by Packet Write (UDF) is not supported.
LOADING DISC
Insert the CD as usual, if it is an MP3 CD, the display will show “MP3 T01” then the message
“READING” will appear, when disc scanning completed, the first track on the first directory will play.
NOTE: 1)
2)
ICON turns on when a MP3 disc is playing.
ICON is blinking when under directory/Files search mode.
NAVIGATING THROUGH DIRECTORIES AND TRACKS
NOTE: MP3 Directory / Track selection can be done by Encoder Volume Knob or Tune Up / Down
Buttons Both operations will be described. But Encoder Volume Knob is available on some
models only. Please skip this description if your model is not equipped with this feature.
THERE ARE FOUR WAYS TO SELECT YOUR FAVORITE TRACK / DIRECTORY
A) SEARCHING TRACK DIRECTLY
Under MP3 play mode, press MP3 MENU BUTTON once, the display shows “MP3 T*”, enter the
desired track number directly, then press MP3 ENTER BUTTON to confirm.
SEARCH TRACK NUMBER BY USING ENCODER VOLUME KNOB
Rotate the ENCODER VOLUME KNOB to scroll through the numbers, then press MP3 ENTER BUTTON
to confirm.
B) SEACRCHING BY DIRECTORY OR TRACK NAME
(1) SEARCH DIRECTORY / TRACK NAME BY USING TUNE UP / DOWN BUTTON
Under MP3 Play Mode, press MP3 MENU BUTTON twice, the display shows “ * “ , enter the character
directly. The unit searches files and directories which have the same character which is inputted by the
user. The unit shows these sorted files and directories by TUNE UP / DOWN Button (TUNE DOWN
First). If the selected name is directory, the user can go into the selected directory by press Mp3
E - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTER BUTTON and continue to search the directory or file name in the directory by
TUNE UP / DOWN Button (TUNE DOWN First). The selected file can be played by pressing MP3 Enter
Button
The distribution of alphabetical characters are listed as follow :
Button
DISP
TUNE UP
SEL
M1
M2
M3
M4
M5
M6 MODE
TUNE DN
VOL UP/DN
Next/Previous Character
Move Cursor
J,K,L M,N,O P, Q , R
V,W,X Y,Z, Space _,-,+
A,B,C D,E,F G,H,I
S,T,U
Character
(2) SEARCH DIRECTORY / TRACK NAME BY USING ENCODER VOLUME KNOB
Under MP3 Play Mode, press MP3 MENU BUTTON twice, the display shows “ * “. Rotate the
ENCODER VOLUME KNOB for selecting the character. In this Encoder Search mode, SELECT button
use as move cursor. Press BAND button use as MP3 CONFIRM BUTTON. The unit searches files and
directories which have the same character which is inputted by the user. The unit shows these sorted
files and directories by ENCODER VOLUME KNOB (ROTATE ANTI-CLOCKWISE First). If the selected
name is directory, the user can go into the selected directory by press MP3 CONFIRM BUTTON and
continue to search the directory or file name in the directory by ENCODER VOLUME KNOB (ROTATE
ANTI-CLOCKWISE First ) The selected file can be played by pressing MP3 ONFIRM BUTTON.
(C) SEARCHING FROM DIRECTORY
(1) SEARCH DIRECTORY BY USING TUNE UP / DOWN BUTTON.
Under MP3 play mode, press MP3 MENU BUTTON three times, Then the first Directory name is
shown. Press TUNE UP/DOWN (TUNE DOWN FIRST ) to navigate through the directory list, press
MP3 ENTER BUTTON to select the desired directory. The display will show “ \\ “. To select the tracks
under the selected directory, by pressing TUNE UP/DOWN Buttons (TUNE DOWN FIRST) then press
MP3 ENTER BUTTON to confirm when desired track is found.
(2) SEARCH DIRECTORY BY USING ENCODER VOLUME KNOB
Under MP3 play mode, press MP3 MENU BUTTON three times, Then the first Directory name is
shown. Rotate ENCODER VOLUME KNOB (ROTATE ANTI-CLOCKWISE First ) to navigate through
the directory list, press MP3 ENTER BUTTON to select the desired directory. The display will show “ \\
“. To select the tracks under the selected directory, by Rotate ENCODER VOLUME KNOB (ROTATE
ANTI-CLOCKWISE First ) then press MP3 ENTER BUTTON to confirm when desired track is found.
(D) NAVIGATING THROUGH DIRECTORY BY USING M5/M6 BUTTON
Press directory up (M6) or directory down (M5) buttons to skip the current directory forward or
backward by one position.
In a multi-level directories disc, the movement will take place at the current level until the last directory
is reached. At this point press directory down (M5) again , it will move to the next level of directory.
ID3 TAG
Press DISPLAY button repeatedly to Display ID3 TAG information.
If the MP3 file is available with ID3 TAG, pressing the display button repeatedly will show information in
the following sequence:
SONG TITLE > ARTIST> ALBUM TITLE
If any of the ID3-TAG information is not available, pressing the DISPLAY button repeatedly will show
information in the following sequence:
UNKNOWN SONGNAME> UNKNOWN ARTIST> NO ALBUM TITLE
If the MP3 file is without ID3 TAG, pressing the DISPLAY button, & “NO ID3 TAG” will be displayed.
The file name & track number of the MP3 file will scroll repeatedly through the display during the
playing of the MP3 file.
E - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
13.REMOTE CONTROL
8
9
1
2
3
10
11
12
4
5
6
7
13
14
OPERATIONS:
Key
Radio Mode
Power On/Off
CD Player Mode
Power On/Off
MP3/USB/SD Mode
Power On/Off
(
)
1. Power
Adjust Vol,Bas,
Tre,Fad,Bal
Adjust Vol,Bas,
Tre,Fad,Bal
Adjust Vol,Bas,
Tre,Fad,Bal
2. Volume Up/Down
Display Clock
Display Clock
ID3 tag information
Display Clock,
3. ID3/DISP
Numeric key 0*
4.Stereo/Mono
Stereo/FM Mono
No Function
No Function
Track Up/Down/ Numeric key 8*9*
No Function
Tuning/Seek Up/Down
Local/Distant
Track Up/Down
No Function
No Function
Mute
5. Tuning Up/Down
6. LOC
Sation Scan
No Function
7. Scan
Mute
Mute
8. Mute
Bas,TreꢁBalꢁ
Fad,P-vol,Beep
Bas,TreꢁBalꢁ
Fad,P-vol,Beep
Bas,TreꢁBalꢁ
Fad,P-vol,Beep
9. Audio
Change to CD/MP3 or
AUX IN
Change to Radio or AUX IN
Change to Radio or AUX IN/
Numeric key 7*
10. Source
Band
11. Band/Enter
MP3 Enter
No function
Auto Store/Preset Scan
Preset EQ
No function
Preset EQ
Pause
12. AS/PS
13. EQ
14. Numeric Key(1)
Preset EQ
Pause
Preset station 1
Preset station 2
Preset station 3
Preset station 4
Preset station 5
Preset station 6
(2)
(3)
(4)
(5)
(6)
CD scan
CD scan
Repeat
Repeat
Shuffle
Shuffle
No Function
No Function
Folder Down
Folder Up
E - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
14.SPECIFICATIONS
CD PLAYER
System
Usable disc
CD Player
Compact disc audio system
Sistema:
Sistema áudio CD
CD
Compact disc
44.1KHz
1bit
Tipo de disco:
Frequência de Amostragem:
Conversor D/A:
44.1KHz
1bit
Sampling frequency
No of quantization bits
Frequency
5-20,000Hz
2 channels
70dB
Resposta de frequencia
Número de canais:
Relação sinal/ruído:
5-20,000Hz
2 canais
70dB
Number of channels
S/N Ratio
RADIO SECTION
FM
Rádio FM
87.5-107.9MHz
87.5-108MHz
10.7 MHZ
melhor que 15dB a S/N 30dB
25 dB at 1KHz
50 dB
Faixa de Frequencia:
Frequency Range
87.5-107.9MHz
87.5-108MHz
10.7 MHz
Frequência Intermediária:
Sensibilidade útil:
Separação estéreo
Relação Sinal/Ruído
AM/MW
Intermediate Frequency
Usable Sensitivity
Stereo Separation
S/N Ratio
AM/MW
Frequency Range
Better than 15dB at S/N 30 dB
25 dB at 1KHz
50 dB
Faixa de frequencia:
530-1710KHz
522-1620KHz
450KHz
Melhor do que 45dB
40dB
530-1710KHz
522-1620KHz
450KHz
Better than 45dB
40 dB
Frequencia intermediária:
Sensibilidade útil:
Relação Sinal/Ruído:
Geral:
Alimentação:
Polaridade:
Intermediate Frequency
Usable Sensitivity
S/N Ratio
GENERAL
DC 11-14V
Terra negativo
4ohms
DC 11 -14V
Negative Ground
4 ohms
Power Supply
Polarity
Speaker impedance
Power Output
Impedancia alto-falantes:
Potência de saída:
Nota:
4x 80 Watts
80w x 4
REMARK :
Specifications subject to change without notice.
As especificações estão sujeitas a alterações sem prévio aviso.
CD PLAYER
CD PLAYER
Compact disc audio system.
Sistema:
System
Compact Disc Audio System
Compact Disc.
Disco:
Abspielbare Discs
Sampling-Frequenz
Anzahl Quantisierungsbits
Frequenz
Anzahl Kanäle
Signalrauschabstand
Compact Disc
44,1 kHz
1 bit
44.1KHz.
1bit.
Frecuencia Muestreo:
Cuantificación:
5-20,000Hz.
Frecuencia:
5-20.000Hz
2 Kanäle
70 dB
2 canales.
70dB
Número de canales:
Relación señal/Ruido S/N Ratio
RADIOTEIL
RADIO SECCIÓN
FM
FM
Frequenzbereich
87.5-107.9MHz
87.5-108MHz
Rango Frecuencia:
87.5-107.9MHz
87.5-108MHz
10.7Mhz.
Zwischenfrequenz
Nutzbare Empfindlichkeit
10.7 MHz
Frecuencia Intermedia:
Sensibilidad Útil:
Separación estereo:
S/N Ratio:
AM/MW
Rango Frecuencia:
Besser als 15 dB bei einem
Signalrauschabstand von 30 dB
25 dB bei 1 kHz
50 dB
Mejor que 15dB a S/N 30dB.
25dB a 1Khz.
50dB.
Stereotrennung
Signalrauschabstand
AM/MW
530-1710KHz
522-1620KHz
450KHz.
Mejor que 45dB.
40dB.
Frequenzbereich
530-1710KHz
522-1620KHz
450KHz
Besser als 45 dB
40 dB
Frecuencia Intermedia:
Sensibilidad útil:
S/N Ratio:
Zwischenfrequenz
Nutzbare Empfindlichkeit
Signalrauschabstand
GENERAL
ALLGEMEINES
Stromversorgung
Polarität
Lautsprecherimpedanz
Ausgangsleistung
DC 11-14V.
Negativo a masa.
4 Ohms.
Alimentación:
Polaridad:
DC 11 -14 V
Erde negativ
4 Ohm
Impedancia altavoces:
Potencia de salida:
4x80W.
80 W x 4
Nota:
Debido al rápido avance tecnológico, estas especificaciones están
sujetas a cambios sin previo aviso.
ANMERKUNG:
Technische Änderungen ohne Meldepflicht vorbehalten.
LECTEUR CD
Système
LETTORE CD
Compact disc audio system
Compact disc
44.1KHz
Sistema
Sistema di Audio CD
CD
Disques utilisables
Fréquence échantillonnage
Nbre de quantisation bits
Fréquence
Tipo di disco
Frequenza di campionatura
N° quantizzazioni Bit
Frequenza
44.1KHz
1 bit
1bit
5-20,000Hz
2 canaux
70dB
5-20,000 Hz
2 Canali
70db
Nombre de canaux
Ratio S/B
Numero di Canali
Rapporto S/N
SECTION RADIO
FM
Gamme de fréquences
SEZIONE RADIO
FM
87.5-107.9MHz
87.5-108MHz
10.7 MHz
Plus de 15dB à S/B 30 dB
25 dB à 1KHz
50 dB
Raggio di Frequenza
87.5-107.9MHz
87.5-108MHz
10.7 Mhz
migliore di 15dB a S/N 30 dB
25dB a 1KHz
50dB
Frequenza intermedia
Sensibilità
Separazione Stereo
Rapporto S/N
Fréquence intermédiaire
Sensibilité utilisable
Séparation stéréo
Ratio S/B
AM/MW
Plage de fréquences
AM/MW
530-1710KHz
522-1620KHz
450KHz
Raggio di Frequenza
530-1710KHz
522-1620KHz
450Khz
Frequenza intermedia
Sensibilità
Rapporto S/N
Fréquence intermédiaire
Sensibilité utilisable
Rapport Signal/Bruit
GENERAL
Alimentation
Polarité
Résistance des enceintes
Puissance de sortie
Supérieure à 45 dB
40 dB
migliore di 45dB
40dB
GENERALE
11 -14V DC
Masse / négative
4 ohms
Alimentazione
Polarità
Dc11 14V
Terra negativo
4 ohms
Impedenza altoparlanti
Potenza d'uscita
80W x 4
4x 80 Watts
REMARQUE :
Le specifiche sono soggette a cambiamenti senza
alcun preavviso.
Les spécifications sont susceptibles d'être modifiées sans
préavis.
E - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
15.TROUBLE SHOOTING
Before going through the check list, check wiring connection. If any of the problems persist after
checklisthasbeenmade, consultyournearestservicedealer.
Symptom
No power
Cause
Solution
If the power supply is properly connected
to the car accessory terminal, switch the
ignition key to “ACC”
The car ignition is not on.
The fuse is blown.
Replace the fuse.
Remove the disc in the player, then put a
new one.
Disc cannot be loaded Presence of CD disc inside
or ejected
the player.
Inserting the disc in reverse
direction.
Insert the compact disc with the label
facing upward.
Clean the disc or try to play a new one.
Compact disc is extremely
dirty or defective disc.
Cool off or until the ambient temperature
returns to normal.
Temperature inside the car is
too high.
Leave the player to off for an hour or so,
then try again.
Condensation.
Adjust volume to a desired level.
Check wiring connection.
Volume is in minimum.
No sound
Wiring is not properly
connected.
The built-in microcomputer is
not operating properly due to
noise.
The operation keys do
not work
Press the RESET button.
Front panel is not properly fixed into its
place
The installation angle is
more than 30 degrees.
Adjust the installation angle to less than
30 degrees.
Sound skips.
The disc is extremely dirt or
defective disc.
Clean the compact disc. Then try to play a
new one.
The antenna cable is not
connected.
The radio does not
work.
The radio station
automatic selection
does not work.
Insert the antenna cable firmly.
Select a station manually.
The signals are too weak.
Mechanism Error
Servo Error
Press the reset button if the error code
does not disappear, consult your nearest
service dealer.
ERROR 1
Press the reset button if the error code
does not disappear, consult your nearest
service dealer.
ERROR 2
If at any time in the future you should need to dispose of this product, please noted that:
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your local Authority or retailer for recycling
advice. (Waste Electrical and Electronic Equipment Directive).
E - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
|