Download from Www.Somanuals.com. All Manuals Search And Download.
00
Contents
Screen Adjustment 19
System 19
1
Before You Start
Important Safeguards
About this manual
4
4
5
DISC/VCD/MP4
Precautions
Maintenance
5
DISC/VCD/MP4 Setup
DISC/VCD/MP4 Operation 23
Selecting Tracks 23
23
6
Location & function of the controls
7
Remote control
Specifications 11
9
Number Buttons 23
Pause the Playback 23
Stop the Playback 23
Play tracks at Random 24
Repeat Playing 24
Skip backward/forward/F.F/F.REW the
Playback 24
System Switch 24
Slow Motion Playback 24
Increase Picture Size 24
On Screen Display 24
Setting the Playback Time 25
Changing Audio Language 25
Changing the Subtitle Language 25
Changing the Viewing Angle 26
Selecting Channel 26
2
3
Installation
Wiring Connections 12
Installing the Unit 13
Detach the Unit 14
Installing the Front Panel 15
Detach the Front Panel 15
Common Operations
To Select Source by Menu 16
Reset the Unit 16
Turning the Unit On/Off 16
Volume Control 16
Setting the Sound Characteristics 16
Adjust the Angle
EQ Setting 17
Turning Loudness On/Off 17
Insert a SD Card 17
Program Playing
Playing PBC(Menu)
Selecting Menu
26
26
16
27
DISC Setup Menu 27
6
Eject a Dise
17
CD/MP3/SD/USB
CD/MP3/SD/USB Setup 34
Mute Function 17
Mode Selector 17
Infrared Sensor 17
Double Function
CD/MP3/SD/USB Operation 34
Selecting Tracks
35
17
Repeat Playing 35
Number Buttons 35
Selecting Track 35
Stop Play 35
Playing Tracks at Random 35
Pause the Playback 36
Skip backwafd/forward/F.F/F.REW
the Playback 36
54
Main Menu
Main Menu Setup 18
Video Adjustment 18
Audio Adjustment 18
Time Adjustment 19
2
Download from Www.Somanuals.com. All Manuals Search And Download.
00
11
Additional Information
Contents
Common Symptoms
There is no power.
Cause
Solution
If the power supply is properly connected to
the car accessory, switch the ignition key to
ON or ACC.
The car ignition is
switched off
Replace with same amperatge fuse rate.
Remove the disc from the player
The fuse has blown.
There is another disc inside
the player
The disc cannot
be loaded.
On Screen Display 35
Program Playing 35
Eject a SD Card 35
Eject an USB 35
10
IPOD
IPOD Operation 44
Insert the compact disc with the label facing
upward
Inserted disc is upside down
The device does not
work correctly
(EJECT, LOAD,
PLAY)
The surface of disc is extre-
mely dirty,Scrached or
damaged.
Selecting Tracks
44
Clean the disc or try another disc,if the new
disc works correctly,the first disc is damaged.
Fast Forward/Fast Reverse
Repeat Playing 44
Playing Tracks at Random 44
Pause the Playback 45
44
7
Tuner
Cool off untilthe ambient temperaturereturns
to normal.
Temperatureinside the caris
too high.
Listening to the Radio
Band Selector 37
37
File Selector
Eject IPOD 45
45
The volume controlis set too
low.
Turn up thevolume properly.
Selecting The stored Station 37
Manual/Automatic Tuning 37
DX/LOC Selector 37
MO/ST Selector 38
Goto FREQ 38
There is nosound.
Check the connections according to
the wiring diagram.
The device hasnot been wired
correctly.
11 Additional Information
Simple Troubleshooting Guide
46
AMS
38
1. The built-inmicroprocessor
is not operating properly.
2. Front panel is not properly
attached into its place
1. Switch the device off andon again or press
the RESET button.
2. Remove and reinstall the front panel.
The operation keys
do not work
Number Buttons 38
RDS Setup 39
Alternative Frequencies 39
Adjust the installation angle to less than 30
degrees
The installation angleis more
than30 degrees
Traffic Alarm
Program Type
39
36
Wait until theroad becomes smoother before
playing the disc.
The sound ofthe
disc player skips
The surface ofthe road is
uneven.
The surface ofdisc is extremely
dirty,scrached ordamaged.
Clean the discor try anotherdisc, if thenew
disc works correctly, the firstdisc is damaged.
8
9
AUX
AUX Touch Screen Menu 40
Insert the antennacable firmly intothe antenna
socket of theunit.
The antenna cableis not
connected.
No radio reception.
Bluetooth Mode
Bluetooth Operational Interface 41
Using a Bluetooth Wireless connection 41
Pairing Your Unit and Bluetooth Phone 41
Pairing in Handsfree Mode 41
In automatic search
mode the radio does
not stop ata trans-
mitting station.
The transmission signals are
too weak.
Tune in toa radio station manually.
Cellphone Pairing Mode 41
Bluetooth Connection and DVDonnection 42
Using the Unit as a Handsfree Device 42
Last Number Dialing 42
To Dial by Cellphone 42
To Dial by the Unit
43
Using the Unit as Bluetooth Music 43
Audio Transfer between The Unit and
Phone 43
46
3
Download from Www.Somanuals.com. All Manuals Search And Download.
10
IPOD
Before You Start
Eject IPOD
File Selector
IMPORTANT SAFEGUARDS About this manual
MENU
If the iPod is removed during iPod mode, the
unit will automatically switch to radio mode.
During IPOD mode, press
to go back to the previous catalog.
on the monitor
Be sure to connect the color coded wires
according to the diagram. Incorrect con-
nections may cause the unit to malfunct-
ion or damage the vehicle, s electrical sy-
stem.
This unit features a number of sophisti-
cated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
DISC/VCD/CD/MP3/MP4/SD operation
that can only be operated by the remote
control, but there are also functions that
can be operated by the buttons provided
for the main unit.
1
Press
5 tracks, press
(show as in the right of the picture).
on the monitor to select the previous
to select the next 5 tracks
2
Be sure to connect the speaker (-) wires
to the speaker (-) terminal. Never conn-
ect the left and right channel speaker c-
ables each other or to the vehicle body.
Playlist
Artist
Album
Genre
Track
3
4
Make sure all the connections are comp-
letely correct before turning on your unit.
When replacing the fuse(s), the replace-
ment must be of the same amperage as
shown on the fuse holder.
Note:
This function is operated by using the touch
screen only.
*
Do not block vents or radiator panels.
Blocking them will cause heat to build up
inside and may result in fire.
5
Video or Picture Mode
6
7
To lessen the driver's distraction, install
the unit in an appropriate place.
VIDEO
During IPOD mode, press
to select
video or audio. Video and picture can be
played at this time.
The unit and the remote control can not be
operated in this mode, you can just operate
IPOD to select video and picture.
Power the unit on after starting the engine
otherwise it will shut off due to lack of
power.
8
9
Do not place the remote control in a place
susceptible to high temperature or direct
sunlight. Doing so will damage the remote.
Note:
*
*
This function is operated by using the touch
screen only.
The IPOD TV should be set ON in this
function.
Do not use the unit in extremely high or
low temperatures. Also avoid high humidity
and direct sunlight.
*
Video playback requires Gen 5.5 or earlier
Photo or Video iPod. iPod Touch, iPod Cl-
assic, and iPod Nano with video will only
play music files.
10
11
Take care of the magnetism of the unit.
Do no put the credit card, cassette or w-
atch around the unit.
To minimize disturbance of the video
frequency, keep far away from the unit
when using your phone.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
01
10
IPOD
Before You Start
Note:
IPOD Operation
PRECAUTIONS
*
Pressing and holding
/
on the monitor
also performs the same function
During IPOD playback, connect the IPOD
wire (5V) to the one in backside of the main
unit. When the iPod is loaded, the unit will
play a track. To go back to the source status,
press iPod to enter into iPod setup:
This unit can play the following DISCs only:
Type of disc
Recorded material
Size of disc
Switch
VIDEO
Sound and moving pictures
During playback, press
to turn to
DISC
IPOD, the screen shows: Play video on your
iPod. Then touch screen to return. Then
VIDEO
Sound and moving pictures
Sound only
VCD
CD
you can operate your iPod. Press
to return to main unit operation.
again
8/97
Note:
DISCo-yeye
*
This function is operated by using the touch
screen only.
Sound only
MP3
00:02:47
Repeat Playing
Sound and moving pictures
MPEG-4
15
During playback, press
RPT to track
MENU
Back to the previous menu
repeat, DISC repeat, off. Press it again to
cancel this function.
NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.
Briefly press to play previous track,
press and hold to fast forward.
When driving, do not attempt to
modify the unit. Modifying the
unit may cause an accident.
Note:
*
This function is operated by using the remote
control only.
Briefly press to play next track,
press and hold to fast rewind.
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
Play/ pause
Playing Tracks at Random
VIDEO
Mode switch between IPOD and
main unit
16
During IPOD playback, when pressing
RDM button, Shuffle off, Shuffle Track,
Shuffle Album will be activated.
BLUET
Press the button to enter into bluetooth
mode
Do not turn the unit on in extre-
mely high or low temperature.
Be sure the temperature inside
the vehicle is between +60 C
and -10 C before turning on your
unit .
SRC
Mode switch
Note:
*
This function is operated by using the remote
control only.
Selecting Tracks
21
returntothebeginningofthecurrenttrack,
DuringIPODplayback, press
to
Pause the Playback
To enjoy optimum sound and
images while playing, handle the
DISCs as follows:
21
press
previoustrack,press 21
againwithin3secondstoplay
toplaynexttrack.
27
During IPOD mode, press
button to
pause the playback, Press it again to return
to normal playback.
Note:
*
Pressing
/
on the monitor to performs
the same function
Note:
Press
on the monitor or briefly press
*
Playing Track F.F/F.REW
SEARCH+/- on the head unit also performs
the same function.
20
Press and hold
or
to play the track
fast forward or fast rewind . Do it again or
press ENTER to resume to play normally.
44
5
Download from Www.Somanuals.com. All Manuals Search And Download.
09
01
Before You Start
Bluetooth
To Dial by the Unit
Audio Transfer between the Unit
and Phone
Maintenance
23
When cellphone is connected, press
input the call number, then press
30
to dial. DIAL OK will appear. When the call
is picked up, PICKED UP appears.
to
6
Press
the unit to the cellphone.
to change the conversation from
Replacing the Fuse
Note:
Note:
Makesuretheamperagematchesthe
specifiedvaluewhenreplacingthefu-
ses.Ifthefuseisblown,replaceitwith
anewone.Besureyouareusingone
withthecorrectrating.Ifthesame
problemoccurs,itwouldbesubjected
tothemalfunction.Insuchcases,
pleaseconsulttothenearestservice
dealer.
* The function might cause the bluetooth to be
disconnected for some phones. If this happens,
press the
paired back automatically.
*
*
Press
8
CLEAR on the remote control or
22
in the monitor to delete wrong inputs.
6
button while on the call to be
Insert the Battery Holder into the Remote
Control.
Pressing
same function.
in the monitor also performs the
Using the Unit as Bluetooth
Music
During bluetooth mode, the music on the
cellphone will play through the unit.
To select music fast: press21
the previous track, press
one.
Pause play: press 17
Stop play: press 18
!
Warning
to play
to play the next
Neverusethefusewiththerated
amperagemorethanthatsuppliedto
yourunit,otherwiseitwilldamagethe
unit.
PrecautionsonUsingLithium
Battery
to pause play.
to stop play, and
Alwayskeepthelithiumbatterybeyond
children sreach.Incase
swallowed,seeadoctorimmediately.
press the PLAYto return to the beginning
of the current track.
Replacing the Remote Battery
Note:
Cleaningthebatterywithadrycloth,
toensureitsperfectconnected.
Whentherangeoftheoperationof
the remotecontrolbecomesshort
orstopsoperating,Replacethebattery.
BesuertousealithiumBatterybutton
CellCr2025.
*
This function is only valid on the remote control.
Installthebatterywiththeproperpolarity.
Topreventshortcircuit,donotuse
metaltweezertohandlythebattery.
!
Warning!
Gently pull out the Battery Holder while
pressing the Stopper.
Improperhandlewiththebatterymay
leadtoexplosion.
Itcannotbecharged,disassembledor
thrownintoafire.
Putthebutton-typebatterywithmark(+)
upwardintotheBatteryHolder.
6
43
Download from Www.Somanuals.com. All Manuals Search And Download.
01
09
Bluetooth
Before You Start
Location of the Controls
Open
*
*
Pressing
same function.
5
in the monitor also performs the
Cellphone Pairing Mode
1. Browse your cellphone menu and find
the connectivity or Bluetooth connection
section.
2. Select search for a new handsfree device
function and allow the phone to find the
mobile.
Press in the monitor to turn off the
bluetooth function.
7
Using the Unit as a Handsfree
Device
(Different cell phones have different blue-
tooth menus, please refer to your phone
manual.)
3. When CAR A/V DEVICE appears, select
this item.
( if it can not be connected, please refer
to mobile manual, and connect it again.)
4. To input the password, the password is:
1234.
5. Press the connect with the Handsfree
option on your cellphone, CONNECT
appears.
When the unit is ringing, the display will
show CALL FROM and the phone number
********** .
To accept call: Press
the display will show PICK UP.
to answer a call,
30
31
To reject call: Press
the display will show REJECT.
To end call: Press to end call,
to reject a call,
the display will show HANG UP.
Note:
13
5
*
*
Some of cellphones do not support reject
call during bluetooth mode.
11
Pressing
performs the same function.
and
in the monitor also
Bluetooth Connection and
Disconnection
When you established a bluetooth connection
between this unit and the cellphone, the blue-
tooth icon on the display appears in red.
Closed
Last Number Dialing
30
Press
apear, press
OK appears on the display during
button, last call number will
again, and then REDIAL
29
Press
tion, and
29
Press
PAIR to turn off bluetooth connec-
appears in blue.
, PAIR SUCCESS will appear on
conversation.
the display. When the bluetooth is connected,
the display will show CONNECT. When the
Bluetooth is disconnected, the display will
show PAIRINGTIME OUT.
Note:
17
15
*
Pressing in the monitor also performs
the same function.
16
14
20
To Dial by Cellphone
Note:
1. When you make a call by cell phone, the
unit will automatically be activated. DIAL
OK will appear on the display.
2. When you receive a call, PICK UP appears
on the display.
*
*
Make sure the phone battery has good power.
If not, the connection quality may be affected.
To ensure connection succeed
----Please selete menus of cellphone with bluetooth.
----Please reset the unit and cellphone.
----Please reset every step of pairing.
7
10
1
4
19
3
2
12 18
8
* Disconnect after paring
----Please pair the phone manually.
For example: pairing fixture cellphone connect.
42
7
Download from Www.Somanuals.com. All Manuals Search And Download.
09
01
Bluetooth
Before You Start
Bluetooth Operational Interface Using a Bluetooth Wireless
The Base
Connection
28
Press
BT on the remote control or BT on
the monitorr to open the bluetooth operational
interface:
Thedevicecanbedialedwirelesslyinbluetooth
status.Beforeusingthebluetoothfunction,
pleaseturnonyourcellphonebluetoothfunc-
tion.
Note:
*
To provide the best sound without or little
distorted sound(Some reverberation or
sidetone is caused by cellphone or network
itself.).
6
9
*
*
*
Perfect bidirectional conversation.
Bluetooth ver2.0 compliant.
Please well connect microphone to the unit
before connecting bluetooth.
1
SRC/PWR
11
MENU Button
1
NumberButtons
To input the phone number.
Briefly press to select radio mode or playback
mode, press and hold it to turn the unit on or
off.
During playback mode, press this button to
enter the DISC setup menu;
during radio mode, press it to enter the radio
setup menu, press and hold it to enter the
main menu.
Pairing Your Unit and Bluetooth
Phone
2
3
Diallastcall,answeracall
Hangup,refuseacall.
NumberShow
2
3
Eject Button
The device supports handsfree profile, head-
set profile, A2DP( Audio Advanced Distri-
bution profile)and AVRCP(Audio Video
Remote Control profile). Follow the pairing
instruction for the first time use, after that
the unit will connect automatically.
Press it to eject a DISC.
12
USB Socket
BND/ /[
pair) Button
](band selector/play/pause/
4
5
6
(Back Space) Button
13
14
During radio mode, press it to select the bands;
During playback mode, press it to play or
pause.
DISC Loading Slot
PAIR
15
16
17
18
19
OPEN Button
ACH(audiochange)
During bluetooth, press it to pair.
MUTE Button
Note:
Some phones can switch the audio from the unit
to the phone.
[
/
/
]/[
/
/
]([Search frequency
4
5
Pairing in Handsfree Mode
*
LCD Screen
backward/Previous/The last phone, Answer a
telephone]/[Search frequency forward/Next
Track/Hangup, reject a call])
5
1. Press
PAIR, PAIRING shows on
REL (release the front panel) Button
7
POWER
Press it to turn on or turn off the bluetooth
function.
the screen.
LOU/TA(loudness/traffic alarm) Button
ANGEL
Press it to changes the angle of the monitor.
/
Button
2. CELLPHONE CONNECTION to search
fixtures;
20 BLUETOOTH Microphone
6
7
Common SD Card Slot
3. If the cellphone has connected, PAIR
SUCCESS appears, then CONNECT ,
will change from blue to red.
8
9
C(clear)
BACK
VOL+/ VOL-/SEL
REMOTE Infrared Sensor
RESET Button
8
9
Note:
A/V IN
10
*
Pressing on the monitor also performs
the same function.
8
41
Download from Www.Somanuals.com. All Manuals Search And Download.
01
08
Before You Start
AUX
AUX Touch Screen Menu
Remote Control
Press SRC to switch to the AUX mode:
VOL-
VOL+
AV SET
BLUET
SRC
In AUX mode, select AV SET:
20
AUDIO ADJUST
VIDEO ADJUST
VIDEO FORMAT
EXIT
30
AV SET
For more details to adjust AUDIO, VIDEO
and SYSTEM (Auto 1: PAL, NTSC, SECAM),
(Auto 2: P-M, P-N). Please refer to pages 19 to 20.
To decrease the volume
To increase the volume
Press it to enter into bluetooth mode.
Mode selector
Tips:
For more information on replacing battery, please refer to Replacing the Battery
on page 6.
40
9
Download from Www.Somanuals.com. All Manuals Search And Download.
07
01
Tuner
Before You Start
1
2
3
4
5
6
SOURCE/PWR
(Pause/Play)
17
18
19
20
21
22
23
24
25
26
Alternative Frequencies
RDS Setup
26
Briefly press AF to activate the auto
(Stop Playing)
3
2
1
GOTO (playing time/track)
BAND/TITLE
searching station function. When AF is on,
the unit will skip to the RDS Frequency
with good signal.
RDS
87.50MHz
SETUP
:
SCH
OFF
NONE
OFF
7
4
5
(F.R/F.F)
Note:
AMS/MENU
NONE
9
10
1
It is also performed by pressing
monitor.
in the
*
(Previous/Next Track)
LOC/SUB -T
CLEAR
Traffic Alarm
8
6
ST/AUDIO (mono or stereo/language or
channel selector)
0~9 (Number) Buttons
(Eject Button)
25
Briefly press TAto activate the traffic
alarm function. When AF is on, there is TA
displayed on the LCD. If there is no TP, the
mode will search TP stations automatically.
1
2
3
4
AF(Alternative Frequencies)
Press it to activate AF function.
7
8
PTY/ANGLE
TA/LOUD (TrafficAlarm/Loudness)
TA (Traffic Alarm)
Press it to activate TAfunction.
OSD
The TA is green when it is played by a sta-
tion, if not, it is yellow.
AF/EQ (Alternative Frequency/Equalizer)
Button
Press it toshow the currentinformation.
When TAis playing, the volume will be ad-
justed to a TAlevel automatically When in
other modes (such as DISC,AUX), if a TA
program is played, the mode will skip to the
RDS status automatically. It will resume to
the primary mode after the TAis over.
Press it to select PTY code.
(Left/Right/Up/Down
ENTER
ENTER)
27
PTY(Program Type)
Press it to activate PTY function.
9
ZOOM (zoom in or zoom out)
Slow Forward/Rewind)
During PTY ON, press this button to
search the playing track s type.
BACK
5
6
7
BT (bluetooth mode)Button
28
29
PAIR/VIDEO
During bluetooth mode, press it to pair.
P/N( system adjusting)
Mute
Press it to turn to return to the radio.
Note:
PS:
To display the current RDS station's
programs information.
2
It is also performed by pressing
monitor.
2
in the
*
*
30
/BACK
12
13
During bluetooth mode, press to dial, re-dial
or answer a phone.
During IPOD mode, press it to back to
previous mode.
When TA is off, the LCD will not display TA.
PROG(Program playing)
SEEK+/-
Press it to tune automatically.
8
9
30
14
VOL+/VOL-/SEL
Program Type
TP(Traffic Program)
31
/ROOT
TP the current station doesn't have any
trafic programs TP Search Search
for stations with traffic programs
TP On the current staion is broadcasting
trafic program
RPT(Repeat Playing)
7
15
16
Briefly pressing
function.
PTY to activate PTY
During bluetooth mode, press to hang up or
refuse a phone.
During IPOD mode, press it to back to the
first catalog.
RDM (Playing Tracks at Random)
When PTY is on, PTY ON appears in the
monitor. You can press UP/DOWN
to select the program type, and then press
PTY CODE to search the special program.
The monitor displays PTY SEARCH.
10 EON ON(Enhanced Other Networks
information)
EON:No station has TP; EON ON:RDS
signal finds that another station is broad-
casting trafic program and reminds the user
of searching this station.
If PTY is off, PTY OFF appears in the
monitor and the searching is disabled.
Note:
4
It is also performed by pressing
monitor.
in the
*
10
39
Download from Www.Somanuals.com. All Manuals Search And Download.
01
07
Tuner
Before You Start
MO/ST Selector
Number Buttons
Specifications
During radio status, press Number Buttons
to receive the stored stations.
During radio status, you can press ST
6
button on the remote control to select MO-
NO mode or STEREO mode.
General
AM Tuner Section
During radio status, Number Buttons
Frequency Range
(Optional)
Power Requirement
522-1620(KHz)
14.4V DC
(11-16V allowable)
23
(from 1 to 6)
can help you store yo-
Stereo reception is on when Stereo
appears.
(Europe)
530-1710(KHz)
(U.S.A.)
ur favorite station. You can follow the steps
as below:
Load Impedance
Max.Power Output
Tone Controls
It is switched to MONO mode when Mono
appears.
1
2
When turned to a station,press and hold
IF Range
85W x 4
450KHz
any one of the Number Buttons
Usable Sensitivity 32dBuV
(-20dB)
7dB
Note:
(from 1 to 6) until the number app-
ears on the LCD, which indicates that
station is already stored in the corresp-
onding number button.
Bass100Hz
Treble10KHz
It is only valid on remote control.
*
Switch to MONO compulsively to improve
the listening quality when week signal.
*
VCD/CD Player Section
Approx.197x178x50
mm
(d/w/h)
Dimensions
Weight
It is only valid in FM.
*
VCDSignalSystem
Signal-to-noise Ratio
Separation
AUTO/PAL/NTSC
60dB
Press and hold another number button
more than 2 seconds when listening in
a station in one number button s, the
station will be stored in that number
button.
Approx.2.7kg
AMS
55dB(1KHz)
0.3%
During radio status, briefly press 4 AMS
button on the remote control to scan each
stored station 6 seconds respectively which
Distortion
FM Section
Resolution
1440X234plxels
600NITS
Note:
23
are stored in Number Buttons (from 1
5
Pressing
function.
in the monitor performs the same
*
Brightness
87.5-108(MHz)
(Europe)
Tuning Range
(Optional)
to 6). When you can press the corresponding
Number Buttons or AMS button when your
desired station is on, it will stop on that
station.
DISC Player Section
87.5-107.9(MHz)
(U.S.A.)
On Screen Display
DISCSignalSystem
AUTO/PAL/NTSC
8
During radio status, briefly press
OSD
4
When you press and hold AMS button for
Channels
2
to display the edition information. The preset
frequency displays as the default setting.
IF Range
10.7MHz
10dBuV
more than 2 seconds, it will automatically
activate the memory storing function. The
radio automatically selects a station and
Frequency Response
Signal-to-noise Ratio
Separation
40Hz to 16KHz
60dB
Usable Sensitivity
(-30dB)
has it stored in any one of the Number
23
Goto FREQ
60dB
Buttons (from1 to 6).
Signal-to-noise Ratio
Stereo Separation
50dB
2
Press
GOTO, and the monitor shows FREQ.
Then press the number to input the valid
frequency as 100.00,. The program will then
be played.
30dB 1KHz
40Hz-12KHz
Note:
Note:
*
*
The unit can store up to 6 stations for
Due to continuous product improve-
ment, specifications and design are
subject to change without notice.
Frequency Response
each band.
Note:
7
Pressing
in the monitor also performs
It is only valid on remote control.
*
*
the same function.
It is only valid when GOTO FREQ is ON in
main menu.
38
11
Download from Www.Somanuals.com. All Manuals Search And Download.
07
02
Tuner
Installation
Wiring Connection
Band Selector
Listening to the radio
3
1
2
3
During radio status, repeatedly press
BAND button to select bands in the
following order:
(black line with red
& white head)
(black line with
yellow head)
AUX Audio input
AUX Video input
SUB-W RCA
Rear View
Radio1 P . CH:1
87.50MHz
(Grey line with
yellow head)
(Brown line with
brown head)
4
Video Out 2
FM1
FM2
FM3
(Grey line with
yellow head)
(Brown line with
yellow head)
Video Out 1
Camera Input
87.50M
90.10M
98.10M
87.50M
107.90M
106.10M
AM2
AM1
FRONT RCA Line
OUT R/L
(Dark Grey line with
red & white head)
REAR RCA Line
OUT R/L
(Light Grey line with
red & white head)
5
(For Two Bands)
Note:
Pressing
3
*
on the monitor or BND on the
Ipod Wire Conection
Antenna
(White)
(+5V)
main unit also performs the same function.
6
7
8
9
10
Manual/Automatic Tuning
1
4
5
6
3
Manual Tuning: Press
on the remote control continuously to select
a station downward or upward respectively.
(
or ) button
1
Band Indicator
Shows which band the radio is tuned
to.
2
Automatic Tuning: Press and hold
(
or
2
3
Preset Number Indicator
Shows what preset has been selected.
) button for more than 3 seconds, the ra-
dio automatically searches a station down-
ward or upward respectively and plays when
it finds a station.
Frequency Indicator
Shows which frequency the tuner is
tuned.
Rear View Camera
Input Trigger
Note:
Orange
4
Pressing
function.
on the monitor performs the same
Brown
Pink
*
SEEK+/SEEK-
4
5
Parking Brake
Red
Yellow
Black
Ignition Key
Briefly press to tune by the presettable
range, press and hold to tune automatically.
Front Illumination
Control(+12V)
FILTER
&FUSE
BOX
Battery +
DX/LOC Selector
Blue
Antenna
Power +
The6stationsofthecurrentband.
Briefly press to select station, hold and
press to save the current station to one
of the 6 stations.
Ground
5
During radio status, press
LOC button
Violet/Black
Violet
Rear R
Speaker
to select strong or weak station reception.
LOC appears on the display and only
local station is available. when it disappears
both distance and local stations can be
received.
Green/Black
Rear L
Speaker
Green
6
7
BAND(AM/FM)
To select the bands.
Grey/Black
Grey
Front L
Speaker
White/Black
Front R
Speaker
White
Note:
MENU
Press it to enter the MAIN MENU.
The function is only valid on remote control.
The function is invalid in AM band.
*
*
8
9
BLUET
Press it to enter the Bluetooth MENU.
Antenna Receptacle
Output Plug(Male)
1
2
3
4
5
6
Screw Hole
Wire Clip
Selecting the Stored Station
RDS
Press it to enter the RDS MENU.
27
During radio status, press
button to
Output Socket(Female)
Fan Window
select the stored station upward, press 27
to select the stored station downward.
10
SRC
Press this button to select the signal
source.
Note:
The function is only valid on remote control.
*
12
37
Download from Www.Somanuals.com. All Manuals Search And Download.
02
06
CD/MP3/SD/USB
Installation
Pause the Playback
Program Playing
Installing the unit
13
During CD mode, press PROG, the TFT
displays the program menu. Press NUMBER
BUTTONS to select the track Number and
During CD/MP3/SD/USB playback, Press
to switch between play and pause.
Note:
27
MainPartsList
then press
to move the cursor to START.
*
Pressing
in the monitor also performs the
Press ENTER to start program playing.
Move the cursor to EXIT and press ENTER
to exit the program playing. Move the cursor
same function.
to
move the cursor to
the next page. During this process, press
to cancel the program playing.
and press ENTER to the previous page;
Skip backward/forward/F.F
/F.REW the playback
and press ENTER to
M4x3 &M5x5
4 Screws Each
18
Press
(
or ) on remote control to
perform fast rewind or fast forward.
20
Mounting Sleeve x1
Rear Mounting Bolt x1 Harness Rubber x1
Note:
The function is only valid on remote control.
*
*
2 X
4 X
8 X
16X
6
7
22
Press
CLEAR to clear the mistake input.
Note:
Eject SD Card
*
This function is operated by using the remote
control.
Push SD card to eject it.
Connecting Wire x1
Outer Trim Frame x 1
Steel Bar x 1
During SD Mode:,ejecting the SD card will
switch the unit to DISC mode. If there is
no disc, the unit will switch to USB Mode.
If no USB, the unit will switch to Radio mode.
On Screen Display
Installation Method
DIN Front-Mount
During CD status, press OSD button the
display shows:
Panel
Install twor M5x6 screws on both sides (left and right)
of the lock hook brackets
Eject USB
Single elapsed
Single remain
Pull out the USB to eject it.
Total
elapsed
Total
remain
During USB Mode, removing the USB will
switch the unit to Disc. If there is no DISC,
it will switch to Radio mode.
Note:
*
This function is operated by using the remote
control.
Bend these claws
outward for a tight fit,
if necessary.
Install the unit with four M2 2 screws
To support the unit
Install Outer Trim Frame
36
13
Download from Www.Somanuals.com. All Manuals Search And Download.
06
02
CD/MP3/SD/USB
Installation
Selecting Tracks
Selecting Track
Installing the unit
21
DuringMP3/SD/USBplayback,press
21
2
During CD playback, first press GOTO,
and TFT shows : DISC go to:--:--,press your
desired time of the playback by using num-
ber buttons.
toplayprevioustrack,press
nexttrack.
DuringCDplayback,firstpress
toplay
2
Installation Method
Installation using the screw holes at
the sides of the unit.
21
to
returntothebeginningofthecurrenttrack,
Then press GOTO button, track go to:--:--
appears on TFT, now input your desired
numbers to play the current time of your
selection.
press 21
previoustrack,press
againwithin3secondstoplay
21
toplaynexttrack.
Select a position where the screw holes of
the mounting bracket supplied with the car and
the screw holes of the main unit become aligned
(are fitted), and tighten the screws (see 4 at 2
places on each side). And then fasten them to
the car.
Note:
Bracketsupplied
toyourcar
2
During MP3/SD/USB mode, first press
*
*
Pressing
the same function.
and
on the monitor perform
GOTO and the TFT shows:---. Then press
NUMBER BUTTONS to input the MP3/SD
track's Number to play it; then press GOTO
button, and the TFT shows : --:--, now input
the desired time to play the current track at
this point.
In CD/MP3/SD/USB mode, you can press
track's Number or name to play.
Note:
5
Outer Trim Frame and Mounting Sleeve
Repeat Playing
1 are not used for installation method.
Note:
During CD/MP3/SD/USB playback , press
15
Dashboard
orConsole
*
This function is operated by using the remote
control.
RPT to replay the current track, press
it again to cancel this function.
22
CLEAR to clear the mistake input.
*
Press
Note:
*
*
This function is operated by using the remote
control.
The default setting is DISC Repeat.
Stop Play
During CD/MP3/SD/USB playback, Press
to stop the playback.
18
Number Buttons
Note:
Pressing
function.
Detach the Unit
*
on the monitor performs the same
23
Press one of Number Buttons(0~9) to
select a track to play automatically.
2. Unscrew the 4 screws, pull the main
unit out.
1. Remove the outer trim frame.
Note:
Playing Tracks at Random
*
*
Press track region and the screen shows the
number keys, touch the number to select tracks.
During CD/MP3/SD/USB playback, press
22
Press
CLEAR to clear the mistake input.
16
RDM button on the remote control to
play any track at random under the directory
which you select. Press it again to return to
normal playing.
Note:
*
This function is operated by using the remote
control.
14
35
Download from Www.Somanuals.com. All Manuals Search And Download.
02
06
CD/MP3/SD/USB
Installation
Track Region:
Press this region and the screen
shows the following menu:
number keys appears, touch the
number to select tracks.
CD/MP3/SD/USB Setup
Install the Front Panel
A
Detach the Front Panel
Press REL button in the upper right corner,
and then the front panel will be released.
During CD playback, touching the screen
shows the following menu:
Put notch
B
(shown as picture) onto shaft
.And then slightly press into the right side.
Track region
Touch the " X " to exit this menu.
00:00 00:00
001/105
01:18
Track 03/16
MP3
B
CD
CD
CD
CD
CD
CD
01 Track
02 Track
03 Track
04 Track
05 Track
06 Track
MP3
Demo
amour
1
4
2
5
8
0
3
6
9
X
MP3
MP3
Automatic
MP3
MP3
MP3
Be natural_s_e
Can you celebr
clon_bing bing
A
7
--
During MP3/SD/USB playback, touching
the screen shows the following menu:
Track region
CD/MP3/SD/USB Operation
00:00 00:00
001/105
Insert a CD/MP3 disc into the slot, the unit
will play automatically.
Press REL after turning the unit on, then
insert a SD card when the TFT is slanted and
the programs in the card will be played.
From the back of the main unit insert the
USB and programs in the USB will be pl-
ayed.
MP3
Demo
amour
MP3
MP3
Automatic
MP3
MP3
MP3
Be natural_s_e
Can you celebr
clon_bing bing
If you have loaded a disc, USB and SD Card,
press source to toggle thru and choose which
media source you would like to choose.
Scan the tracks
Note:
CARD
CARD appears in the SD mode and USB
appears in the USB mode.
*
Press SRC on the main unit to switch to DISC
mode. With SD and USB inserted, press this key
repeatedly to switch between USB, SD and disc.
SEL
Sound characteristics
MODE
*
*
*
Press
to turn to mode switch.
Decrease volume level, adjust some items
Bit rate not more than 320kbps.
Supports ID3V1.
Increase volume level, adjust some items
Play/pause
Stop
Previous track
Next track
DISC setup menu
MODE
Mode selector
34
15
Download from Www.Somanuals.com. All Manuals Search And Download.
05
03
Common Operations
DISC/VCD/MP4
Note:
---Preferencespage--
To Select Source by Menu
*
Pressing PWR button on the main unit also
performs the same function.
In any mode, press SRC on the monitor, the
following menu will appear:
Default
Exampleshowinghowtosetloadfactorysetting:
Volume Control
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
Press 14 VOL+ button to increase the
RADIO
--PreferencePage--
14
sound level and press VOL- button to
decrease the sound level.
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
Note:
Subtitle
DISCMenu
Parental
Password
Default
Subtitle
DISCMenu
Parental
Password
Default
Eng
Eng
* Rotating VOL+/- on the main unit or VOL+/-
on the monitor performs the same function.
Reset
Setting the Sound Characteristics
Press it to select your desired item: FM,
DISC, IPOD ,SD Card, USB, BT,AUX, and
press SET to enter into the main menu. If
you want to enter into bluetooth, press
BT; if it does not enter into, that means the
unit does not include the function. In any
mode, press SRC to return to the previous
mode. Press BACK to return to previous
mode.
GoToPreferencePage
LoadFactorySetting
Repeatedly press 14 SEL button to select
the desired mode in the following order:
After selecting the desired mode, you can
adjust the current level by pressing VOL
14
buttons.
Notes:
Note:
* If the font display in cyan, that means this does
not have this function.
* Pressing SEL with rotating VOL on the main
unit also performs the same function.
Reset the Unit
Operating the unit for the first time or after
replacing the car battery, you must reset
the unit.
EQ Setting
While listening to the popular music, classic
music or rock music, you can select the co-
rresponding preset modes to adjust the sou-
nd quality perfectly by using 26 EQ button.
9
Remove the front panel, then press
RESET
button in the panel with a pointed object,
(such as a ballpoint pen) to set the unit to
initial status.
Notes:
26
Repeatedly pressing 3 EQ button to choose
the following modes in turn:
* When some errors occur on the display, you can
also press RESET button to resume to normal.
It will erase the clock setting and some me-
morized functions.
This function can only be operated by the
main unit.
POP
CLAS
ROCK
OFF
*
The default setting is OFF.
Note:
Turning the Unit On/Off
*
This function is operated by using the remote
control only.
1
Briefly press PWR button to turn on the
unit, during working status, press and hold
it to turn off or turn on the unit.
16
33
Download from Www.Somanuals.com. All Manuals Search And Download.
03
05
Common Operations
DISC/VCD/MP4
Turning Loudness On/Off
---Preferencespage--
Mute Function
12
output, and
Press it again to resume to previous volume
level.
25
Press
button to shut off the sound
appears on the LCD.
Press and hold
LOUD button to activate
the loud function. Pressing the button will
increase the low frequency. Press it again
to quit this function.
DISCMenu
ExampleshowinghowtosetDISCMenuLanguage:
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
Note:
Note:
--PreferencePage--
Briefly pressing MUTE on the main unit also
performs the same function.
*
*
Pressing LOU on the main unit also performs
the same function.
TVType
Audio
Auto
Eng
Eng
Eng
English
French
TVType
Audio
Auto
Eng
Subtitle
DISCMenu
Parental
Password
Default
Subtitle
DISCMenu
Parental
Password
Default
Eng
Eng
Spanish
Chinese
Japanese
Korean
Russian
Others
Night Mode
Eject a DISC
3
Press and hold
the night mode, press it again to switch to
the normal mode.
MUTE button to enter
Briefly press while the TFT is slanted to
eject a disc or the TFT will return to the
initial status.
GoToPreferencePage
PreferredMenuLanguage
Note:
Note:
* This function is operated by the main unit only.
*
Pressing on the remote control also performs
the same function.
Parental
Exampleshowinghowtosetparentalcontrol:
(Press
Mode Selector
,
or ,thenpressENTER)
--PreferencePage--
(Press
Insert a SD Card
--PreferencePage--
1
Repeatedly briefly press SOURCE button
to select the different modes available.
Briefly press REL after turning the unit on,
then insert a common SD card into SD slot.
Then reinstall the front panel.
2
3
4
5
6
7
8
Off
G
PG
PG 13
PGR
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
Note:
Subtitle
DISCMenu
Parental
Password
Default
Subtitle
DISCMenu
Parental
Password
Default
Eng
Eng
*
Briefly pressing SRC on the main unit also
performs the same function.
R
NC 17
Adult
Angle Adjustment
18
Press and hold
on the monitor, the press
REL till ANGLE appears
5
GoToPreferencePage
SetParentalControl
Infrared Sensor:
to adjust
monitor backward by definite angle, press
8
Receptor
on the main unit for the wireless
5
to adjust it forward.
remote control.
Notes:
Password
Exampleshowinghowtosetpassword,and thedefaultpasswordis8888.
* When adjusting the monitor angle, use this
method! Otherwise the unit will be damaged.
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
* This function is operated by the main unit only.
--PreferencePage--
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
Subtitle
DISCMenu
Parental
Password
Default
Subtitle
DISCMenu
Parental
Password
Default
Eng
Eng
Change
GoToPreferencePage
ChangePassword
32
17
Download from Www.Somanuals.com. All Manuals Search And Download.
06
04
Main Menu
CD/MP3/SD/USB
Main Menu Setup
1.Video Adjustment
After selecting VIDEO, the sub menu will
appear as follows:
Subtitle
Exampleshowinghowtosetsubtitlelanguage:
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
--PreferencePage--
VIDEO
AUDIO
TVType
Audio
Auto
Eng
Eng
Eng
English
French
TVType
Audio
Auto
Eng
Subtitle
DISCMenu
Parental
Password
Default
Subtitle
DISCMenu
Parental
Password
Default
Eng
Eng
Spanish
Chinese
Japanese
Korean
Russian
Others
SOURCE
SYSTEM
EXIT
EXIT
This menu includes VIDEO, AUDIO,
SOURCE, SYSTEM, EXIT. Press them on
the monitor to set the desired status.
GoToPreferencePage
PreferredsubtitleLanguage
In this menu you can adjust CONTRAST,
COLOR, TINT, BRIGHT, PICTURE.
Note:
* Press and hold SETUP or press MENU on
the main unit to set up this menu; press them
on the monitor to select the option.
Picture Adjustment
Press PICTURE in this menu, it will appear
as follows:
SHARP
EXIT
Press
and
to adjust the size, then
press SAVE to save the setup, press EXIT
to exit this menu.
Note:
* Adjusting the other options perform the same
operation.
18
31
Download from Www.Somanuals.com. All Manuals Search And Download.
04
05
DISC/VCD/MP4
Main Menu
2.Audio Adjustment
3.Source Adjustment
---Preferencepage---
After selecting AUDIO, the sub menu will
appear as follows:
In the main menu, press SOURCE on the
monitorr, the sub menu will appear as follows:
TVType
ExampleshowinghowtosetTVtype:
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
VOLUME
SUBWOOF
FAD
--PreferencePage--
BALANCE
IPOD ON
AUX1 ON
DISC ON
AUX2 ON
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
PAL
TREBLE
BASS
Auto
NTSC
Subtitle
DISCMenu
Parental
Password
Default
Subtitle
DISCMenu
Parental
Password
Default
Eng
Eng
EXIT
You can adjustVOLUME, SUBWOOF,
BALANCE, FAD, BASS, TREBLE, For
example, press FAD, the setting menu
will appear as follow:
You can switch all of the items to ON or
OFF, press the corresponding button to set.
GoToPreferencePage
SetTVStandard
If one of them was set OFF, that function
is null.
Audio
ExampleshowinghowtosetAudiolanguage:
(Press
Note:
* If the font display is in red, this model does
not contain this function.
,
or ,thenpressENTER)
--PreferencePage--
(Press
--PreferencePage--
SUBWOOF
TVType
Audio
Auto
Eng
Eng
Eng
English
French
TVType
Audio
Auto
Eng
4.System Adjustment
Subtitle
DISCMenu
Parental
Password
Default
Subtitle
DISCMenu
Parental
Password
Default
Eng
Eng
Spanish
Chinese
Japanese
Korean
Russian
Others
After selecting SYSTEM, the sub menu
will appear as follows:
FADE F4
EXIT
GoToPreferencePage
PreferredAudioLanguage
CLOCK SYS
Press
level, press EXIT to exit this menu.
and
to adjust the desired FAD
KEY BEEP
MONI FLEX
Note:
* Adjusting the other options perform the same
operation.
EXIT
EXIT
In this menu you can adjust CLOCK SYS,
KEY BEEP and so on.
Note:
* If the item display in sky-blue, then it can not be
set up.
30
19
Download from Www.Somanuals.com. All Manuals Search And Download.
05
04
Main Menu
DISC/VCD/MP4
--GeneralSetupPage--
Clock System
Reverse Pola
Captions
Exampleshowinghowtosetcaptionson/off:
(Press
CLOCK SYS
KEY BEEP
LAMPSEL
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
MONI FLEX
--GeneralSetupPage--
TVDisplay
TVDisplay
AngleMark
Wide
On
Eng
Wide
On
Eng
AngleMark
OSDLang
Captions
EXIT
EXIT
OSDLang
Captions
Off
On
Off
On
On
Press CLOCK SYSTEM on the monitor to
set 12 HOUR or 24 HOUR in this menu.
Setting REVERSE POLA in this menu.
If the signal is +12V , please press
BATTERY in the monitor. If the signal is
0V, please press GROUND.
ScreenSaver
ScreenSaver
Off
GoToGeneralSetupPage
ClosedCaptions
Key Beep
Subwoofer
ScreenSaver
ExampleshowinghowtosetScreenSaveron/off:
CLOCK SYS
KEY BEEP
(Press
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
MONI FLEX
--GeneralSetupPage--
SUBWOOFER
TVDisplay
AngleMark
TVDisplay
AngleMark
Wide
On
Wide
On
EXIT
OSDLang
Captions
Eng
Off
On
OSDLang
Captions
Eng
Off
On
In this menu you can adjust KEY BEEP,
press it on the monitor and select ON or OFF,
the default setting is ON, it means when you
press the keys, they sounded.
EXIT
ScreenSaver
ScreenSaver
On
Off
GoToGeneralSetupPage
ScreenSaver
In this menu you can adjust SUBWOOFER,
press it on the monitor and select ON or OFF,
the default setting is ON.
MONI FLEX
AMS Fullup
CLOCK SYS
KEY BEEP
MANUAL
AUTO
MONI FLEX
LAMPSEL
EXIT
EXIT
In this menu you can adjust MONI FLEX,
The display screen is flexed automatically
when set AUTO, automatics closes when
set MANUAL.
In this menu you can adjust AMS FULLUP.
If the setup is ON, when the presettable
stations are full, no new station is allowed to
store.When you select OFF, it will search
continually.
20
29
Download from Www.Somanuals.com. All Manuals Search And Download.
05
05
DISC/VCD/MP4
Main Menu
--GeneralSetupPage--
RT Scroll
Local Area
TVDisplay
ExampleshowinghowtosetTVDisplaymode:
(Press
LOCAL AREA
EUROPE
LOCAL
SLOW
NORMAL
FAST
U.S.A
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
GOTO FREQ
--GeneralSetupPage--
TVDisplay
AngleMark
TVDisplay
AngleMark
Normal/PS
Normal/LB
Wide
On
Wide
On
EXIT
EXIT
Eng
Off
On
Eng
Off
On
OSDLang
Captions
OSDLang
Captions
Wide
You can select EUROPE or USAor ORIENT
to search the stations quickly by your
current area.
To select your desired speed, SLOW,
NORMAL, FAST. The default settingis
NORMAL.
ScreenSaver
ScreenSaver
GoToGeneralSetupPage
SetTVDisplaymode
Local
TA Volume
AngleMark
Exampleshowinghowtosetpicturemode:
(Press
LOCAL AREA
LOCAL
LOW
,
or ,thenpressENTER)
--GeneralSetupPage--
NORMAL
HIGH
(Press
GOTO FREQ
--GeneralSetupPage--
TVDisplay
AngleMark
TVDisplay
AngleMark
Wide
On
Wide
On
On
Off
EXIT
EXIT
OSDLang
Captions
Eng
Off
On
OSDLang
Captions
Eng
Off
On
In this menu, you may choose to search Local
Stations. When ON is selected, only strong
signaled local stations may be received. When
this is OFF, weak signal out-of-town stations
may be received.
To select your desired volume, LOW,
NORMAL, HIGH. The default setting is
NORMAL.
ScreenSaver
ScreenSaver
GoToGeneralSetupPage
SetAngleMark
Regional Switch
Goto FREQ
OSDLang
Exampleshowinghowtosetlanguagemode:
(Press
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
REG OFF
REG ON
--GeneralSetupPage--
LOCAL AREA
LOCAL
English
TVDisplay
AngleMark
TVDisplay
AngleMark
Wide
On
Wide
On
French
GOTO FREQ
Eng
Off
On
German
Spanish
Italian
OSDLang
Captions
Eng
Off
On
OSDLang
Captions
EXIT
ScreenSaver
ScreenSaver
To set theAF searching region, the default
setting is ON.
Dutch
EXIT
GoToGeneralSetupPage
SetOSDLanguage
Portuguese
To select ON, you can use the GOTO button
on the remote control to select a station s
frequency directly by using the numbers.
28
21
Download from Www.Somanuals.com. All Manuals Search And Download.
05
05
Main Menu
DISC/VCD/MP4
DISC SETUP MENU
Selecting MENU
Adjust Screen
Press
in the monitor, main menu and sub-menu
SETUP on remote control or
1
Selecting Menu: During DISC status,
press MENU to return to the root
4
menu, all of the chapters will appear on
CLOCK SYS
KEY BEEP
7
2
will appear on the TFT. Press
][ ] on the remote control to select
your desired item, then press ENTER.
Press to the pervious one, press SETUP
or press [ ][ ][ ][ ] to move the cursor
on , then press ENTER to exit the
[
][
]
MONI FLEX
[
23
monitor. You can press 27 or button to
select your desired chapter.
EXIT
2 Selecting Title: During DISC status,
SAVE
3
press TITLE to return the title menu,
(Picture 1)
all of the titles will appear on monitor.
You also can press 27 or 23 button to
select your desired chapter.
menu setup.
Press ADJ SCREEN to display the above
menu. Press the square button at the top left
,then the button will move to place
press it at place , it will move to place
then place , press SAVE.
Notes:
*
The selections are the preferred options that
,
will be chosen if they are available on a disc.
If the disc that is inserted does not have the
preferred option then the discs own prefer-
ence will be used.
Note:
RT SCROLL
TA VOLUME
REGION
,
Under DISC menu, touch the screen to select
items.
*
*
If the touch menu options are invalid or the
*
*
*
Regarding SETUP MENU, please refer to
the following pages for more details.
disc does not support touch-TITLE,
27
that is
Some functions vary depending on the types
of models or formats of the disc.
Touch the screen to select menu, touch it
again to select the item.
Clock Adjustment
the same as bottons on the remote control
EXIT
will display on the screen. Press
press to right, press to up, press to
down and press to ENTER.
to left,
(Picture 2)
CLOCK
Press in picture 1 or press in picture 2
to enter the following menu:
00:00:00
EXIT
CLOCK
Press CLOCK ADJ on the monitor to
adjust the clock.
EXIT
22
27
Download from Www.Somanuals.com. All Manuals Search And Download.
05
05
DISC/VCD/MP4
DISC/VCD/MP4
Number Buttons
Program Playing
DISC/VCD/MP4 Setup
Changing the viewing angle
(Multi-angle)
23
Press one of
Number Buttons(0~9)
During VCD mode, press 13 PROG, the
TFT displays the program menu. Press
NUMBER BUTTONS to select the track
During DISC/VCD/MP4 playback, touch
the screen. The bottom will display the
following menu:
to select a track, it will be played auto-
matically.
With DISCs featuring multi-angle (scenes
shot from multiple angles) recordings, you
can press 7 ANGLE to switch among vie-
wing angles during playback.
Number and then press
27
to move the cursor
Note:
to START, press ENTER to start program
playing; move the cursor to EXIT and press
ENTER to exit the program playing. Move
Press this region and the screen shows the
following menu: number keys appears, touch
the number to select tracks.
*
Play/pause
Stop
Selection options switch as follows:
Touch the " X " to exit this menu.
the cursor to
previous page; move the cursor to
and press ENTER to the
and
ANGLE 1
ANGLE 2
ANGLE 3......
Decrease volume level
Increase volume level
DISC setup menu
Track region
Notes:
press ENTER to the next page.
During this process, press
the program playing.
to cancel
18
*
This function is operated by using the remote
control.
Mode selector
1
4
7
2
5
8
0
3
6
9
X
*
*
This function only operates with DISCs featu-
ring multi-angle recordings.
Note:
Note:
This function is only valid on the remote control.
*
*
*
Press the right corner repeatedly to play the
next track( shows), press the left corner to
play the previous track( shows).
The
ates it features multi-angle scenes.
The number in the mark indicates the
mark on a DISC's package indic-
3
22
Press CLEAR to clear the input.
--
3
number of angles from which scenes were shot.
It is invalid to press ANGLE during fast
forward/fast reverse or pause.
DISC/VCD/MP4 Operation
*
Playing PBC (Menu)
22
*
Press
CLEAR to clear the input.
14
Insert a disc into the slot , the unit will
automatically switch on. If a disc is loaded,
press SOURCE on the remote control to start
the playback. If the unit is in other menu,
press DISC in the monitor to switch to disc
play.
3
During VCD status, press
TITLE, PCB.
Pause the Playback
Playback starts and the menu of entire
disc appears on the monitor. Then you
can select your favorite track by using 23
Number Buttons. When a track is playing,
Selecting Audio Output
During DISC/VCD/MP4 playback, press
17
6
to switch between play and pause;
During stop mode, press this button to
resume playback mode.
To change audio output, press
button to select the following channel:
AUDIO
Note:
4
you can press
MENU to return to the
Stereo
Mono Right
Mono Left
Press SRC on the main unit to switch to DISC
*
menu if you would like to end the track and
select others. To cancel PBC playing, press
Note:
mode. If an SD card and USB is plugged into
the unit, press this key over again to toggle
between USB, SD and disc.
*
Pressing
same function.
in the monitor also performs the
3
TITLE button again.
Pressing
in the monitor performs the same
*
Selecting the corresponding output to set
the different sound characters.
Note:
This function is operated by using the remote
control.
function.
Stop the playback
*
*
Note:
During DISC/VCD playback, first press,
, then press or on the remote
Selecting Tracks
PBC playing confirms to version 2.0 of VCD
This function is operated by using the remote
control only.
*
21
DuringDISC/MP4playback,press
21
control to replay. Press
twice to stop
disc and SVVD disc only.
toplayprevioustrack,press
nexttrack.
DuringVCDplayback, press
toplay
playing completely, then press to return
to the beginning of the current track.
During MP4 playback, press first, then
21
press
current track.
to return to the beginning of the
toreturntothebeginningofthecurrent
21
track,press
toplayprevioustrack,press
againwithin3seconds
21
toplay
Note:
Pressing
function.
nexttrack.
Note:
*
in the monitor performs the same
*
Pressing left/right twice continuously in the
monitor also performs the same function.
26
23
Download from Www.Somanuals.com. All Manuals Search And Download.
05
05
DISC/VCD/MP4
DISC/VCD/MP4
During VCD status, press OSD button the
display shows:
Playing Tracks at Random
Note:
Changing audio language
(Multi-audio)
The function can be operated by selecting the
DISC MENU SETUP.
*
16
During DISC/VCD/MP4 playback, press
Single elapsed
Display off
Single remain
DISCs can provide audio playback with
different language. With DISCs featuring
6
multi-audio recordings, you can press
AUDIO to switch between language and
audio systems during playback.
RDM button on the remote control to play
any track at random under the directory
which you select. Press it again to return to
normal playing.
Total
elapsed
Total
remain
Slow motion playback
During MP4 status, press OSD button the
display shows:
During DISC mode, press
play. There are speeds as follow:
to slow
Note:
Selection options switch as follows:
Single
Single
*
This function is operated by using the remote
control.
elapsed
remain
AUDIO 1
AUDIO 2
AUDIO 3......
Display off
Note:
Repeat Playing
Note:
*
This function is operated by using the remote
control.
This function only operates with DISCs fea-
During VCD mode, press
play. There are speeds as follow:
to slow
*
This function is operated by using the remote
control.
15
During DISC playback, press
the remote control to perform replaying
function as followings:
RPT on
*
turing multi-audio recordings.
2
*
The number in the
mark on a DISC's
Title
Chapter
Setting the Playback Time
package indicates the number of recorded
languages/audio systems.
Off
2
During DISC mode, press GOTO button
Note:
During VCD/MP4 playback , press RPT
on the remote control to TRACK REPEAT.
to set the playing time, when the TFT dis-
play : Title/Chapter/Audio/Subtitle/Angle
/TT time/CH time/Repeat/Time Disp.
The function is only valid on remote control.
*
Note:
Changing the subtitle language
(Multi-subtitle)
Press
ENTER to set the status. Then press NU-
7
2
[
][ ] to select the options, press
*
This function is only valid on remote control.
Increase the size of picture
MBER BUTTONS or
the current status.
7
2
[
][ ] to set
With DISCs featuring multi-subtitle recor-
dings. You can press SUB-T to switch
9
During DISC/VCD/MP4 mode, Press
Skip backward/forward/F.F
/F.REW the playback
5
ZOOM to increase the picture in size. There
are sizes as follow, Each pressing increases
the size until the maximum size is reached.
2
between subtitle languages during playback.
Selection options switch as follows:
During VCD mode, press
to set the playing time, when the TFT dis-
GOTO button
20
Press
(
or ) on remote control to
perform fast rewind or fast forward.
Each pressing will change as follow:
play : track/DISC time/track time/repeat
......
Subtitles 1
Subtitles 2
Subtitles OFF
2X
3X
4X
/time disp. Press
options, press ENTER to set the status.
23
[
][ ] to select the
No Change
Note:
2X
4X
8 X
16X
Then press
NUMBER BUTTONS or
*
This function is operated by using the remote
control.
Note:
[
][ ] to set the current status.
Note:
The function is only valid on remote control.
*
2
27
During MP4 playback, first press
GOTO,
*
This function only operates with DISCs fea-
turing multi-subtitle recordings.
*
This function is only valid on remote control.
and monitor shows : ---, press your desired
track by using number buttons and press EN-
TER to set the status. Second press GOTO
button, and the monitor shows: -:--:--, input
your desired time, then press ENTER.
2
*
The number in the
mark on a DISC's
System Switch
package indicates the number of recorded
subtitle languages.
On Screen Display
During DISC/VCD mode, Press
remote control to set the TV standard to PAL
or NTSC or AUTO system.
P/N on
8
During DISC status, press
the display shows:
OSD button
Note:
*
*
This function is operated by using the remote
control.
Title elapsed
Display off
Title remaining
AUTO
NTSC
Chapter
remaining
Chapter
elapsed
22
Press
CLEAR to clear the mistake input.
PAL
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
|