LTC 0335 & LTC 0355
Installation Manual
Installatiehandleiding
Digital Monochrome
Cameras
MCaanumeléd’rinastaNllautiomnérique Noir et
Blanc
Installationsanleitung
Digitale Schwarz-Weiß-
Kamera
MCaánumaladerainsDtaliagciiótnales de
Blanco y Negro
Digitale Zwart/Wit Camera
EN
FR
DE
ES
NL
IT
Manuale d’installazione
Videocamera Digitale in
Blanco e Nero
MCaânumaladeraInsDtruigçõietsal
Monocromática
PT
ZH
Download from Www.Somanuals.com. All Manuals Search And Download.
LTC 0335 & LTC 0355 | Installation Manual
EN | 2
7. Do not defeat the purpose of a polarized or grounded mains plug.
A polarized plug has dissimilar prongs (one wider than the other)
to ensure correct polarity, while a grounded plug has an
additional 'ground' prong provided for your safety. If the plug
supplied with the apparatus does not fit into your outlet, consult
an electrician for advice.
8. Protect the power-supply cord from being walked on or pinched,
particularly close to plugs, receptacles and the point where it exits
from the apparatus.
9. Only use attachments and accessories (including stands, tripods,
mounting brackets and housings) specified or recommended by
the manufacturer.
10. Unplug the apparatus during lightning storms and when unused
for extended periods.
11. Do not attempt to service this unit yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
12. Servicing is required when the apparatus does not function in the
normal way, has been dropped, if liquid has been spilled on it, or
if it has been exposed to rain or water. Unplug the unit from the
outlet and refer servicing to qualified service personnel.
13. An all-pole mains switch with contact separation of at least 3 mm
in each pole shall be incorporated in the electrical installation of
the building.
EN
WARNING
To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
Bosch Security Systems | 2003-08 | Version 2
Download from Www.Somanuals.com. All Manuals Search And Download.
LTC 0335 & LTC 0355 | Installation Manual
EN | 3
FCC INFORMATION
CAUTION
Any changes or modifications to construction of this
device that are not expressly approved by the party
responsible for compliance could void the userfs authority
to operate the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
•
•
•
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for
help.
Bosch Security Systems | 2003-08 | Version 2
Download from Www.Somanuals.com. All Manuals Search And Download.
LTC 0335 & LTC 0355 | Installation Manual
EN | 4
SPECIFICATIONS
LTC 0335/x0
LTC 0355/x0
Standard resolution
High resolution
Standard
CCIR
EIA
CCIR
752 x 582
EIA
768 x 494
Active pixels (H x V)
Imager
512 x 582
512 x 492
1/3" interline CCD
Resolution
380 TVL
<0.12 lux
570 TVL
<0.09 lux
Minimum illumination
Signal-to-noise ratio
Video output
Synchronization
Shutter
> 50 dB
1 Vpp, 75Ω
Internal or Line-Lock (selectable)
Auto / Flickerless / Off (selectable)
CCIR: 1/50 - 1/500000 - EIA: 1/60 - 1/600000
Autoblack
AGC
On / Off (selectable)
On (0-21 dB)/ Off (0 dB) (selectable)
On / Off (selectable)
BLC
Lens mount
ALC
C and CS compatible
Video-iris or DC-iris (auto detect)
Power supply
LTC 03x5/10 & /20: 12 to 28 VAC or 11 to 36 VDC
LTC 03x5/50 & /60: 100 to 230 VAC
Power consumption
Dimensions (HxWxL)
Weight
<4 W
58 x 66 x 122 mm (2.28 x 2.6 x 4.8 inch without lens)
450 g (0.99 lbs) (without lens)
Camera mount
Two 1/4" 20 UNC - isolated (bottom) and non-isolated
(top)
Operating temperature
Controls
-20ºC to +50ºC (-4ºF to +122ºF)
On-screen display (OSD) with softkey controls
Bosch Security Systems | 2003-08 | Version 2
Download from Www.Somanuals.com. All Manuals Search And Download.
LTC 0335 & LTC 0355 | Installation Manual
EN | 5
Type number overview
Low voltage
High voltage
CCIR (Eur.) EIA (USA)
CCIR (Eur.) EIA (USA)
Standard resolution LTC 0335/10 LTC 0335/20 LTC 0335/50 LTC 0335/60
High resolution LTC 0355/10 LTC 0355/20 LTC 0355/50 LTC 0355/60
UNPACKING
Unpack carefully and handle the equipment with care. The
packaging contains:
•
•
•
•
Camera
CCD protection cap
Spare lens connector (male)
These Instructions
Note:
If equipment appears to have been damaged during shipment, repack
it in the original packaging and notify the shipping agent or supplier.
CONNECTION
Power
LTC 03x5/10 and /20
LTC 03x5/50 and /60.
Bosch Security Systems | 2003-08 | Version 2
Download from Www.Somanuals.com. All Manuals Search And Download.
LTC 0335 & LTC 0355 | Installation Manual
EN | 6
To open the quick-connect, push in on the tabs.
Connections are not polarity sensitive
Use stranded or solid wire AWG16 to AWG22, cut back 10mm (0.4")
of insulation.
Composite Video
LENS MOUNTING
Pin Video iris lens
DC iris lens
Damp-
1
2
3
4
Supply (11 V, 50 mA max.)
Not used
Damp+
Drive+
Video signal 1 Vpp, 1 kΩ
Ground
Drive-
•
Video-iris and DC-iris lenses are recommended for the best
picture performance.
•
•
The camera automatically detects the type of lens used, and
optimizes performance accordingly.
A spare male lens connector is provided if required.
Bosch Security Systems | 2003-08 | Version 2
Download from Www.Somanuals.com. All Manuals Search And Download.
LTC 0335 & LTC 0355 | Installation Manual
EN | 7
CAUTION
•
To avoid damaging the CCD sensor when using a C-
mount lens, turn the 'green' back-focus ring counter
clockwise until it stops ('Back focus adjustment')
before mounting the lens.
•
Lenses weighing more than 0.5 kg (1.1lbs) must be
separately supported.
Note:
If a short circuit is detected on the lens connector, the on-screen
display (OSD) failure message 'LENS SHORT CIRCUIT' is shown.
The lens circuit is automatically disabled to avoid internal damage.
Remove the lens connector and check the pin connections.
Back focus adjustment
•
Camera accepts both C and CS-mount lenses.
1. Unlock the back focus locking
button.
2. Turn the back focus adjustment as
required. (See Note 1).
3. Lock the back focus locking button.
Notes:
1. The camera's unique "Lens Wizard"
allows focusing to optimize picture
sharpness in both bright and low
level lighting. The lens wizard can
be found in the Installer menu.
Bosch Security Systems | 2003-08 | Version 2
Download from Www.Somanuals.com. All Manuals Search And Download.
LTC 0335 & LTC 0355 | Installation Manual
EN | 8
2. When back focusing vari-focus lenses, it must be possible to
obtain a sharp picture in both wide-angle and tele positions, and
for both far and near focus.
3. When back focusing zoom lenses, ensure the object of interest
remains in focus throughout the entire zoom range of the lens.
(See Advanced Set up).
CAUTION
Do not point the camera/lens into direct sunlight. When
viewing an outdoor scene, a video- or DC-iris lens is
recommended.
MOUNTING THE CAMERA
The camera can be mounted from the top or bottom.
Note:
The BOTTOM mounting is
isolated from ground.
ADVANCED SET-UP
The camera will normally give an optimal picture without the need
for further adjustments. However for special circumstances advanced
set up options are available.
Bosch Security Systems | 2003-08 | Version 2
Download from Www.Somanuals.com. All Manuals Search And Download.
LTC 0335 & LTC 0355 | Installation Manual
EN | 9
Hints for menu navigation
How to use the 5 keys
Up key
Menu/select key
Right key
Left key
Lock
Down key
•
Press the menu/select key to access the menus or to move to the next or
previous menu.
•
Press the menu/select key for approximately 1.5 seconds to open
the Installer menu.
•
•
Use the up or down keys to scroll up or down through a menu.
Use the left or right keys to move through options or to set
parameters.
•
•
When in a menu, quickly pressing the menu/select key twice
restores the selected item to its factory default.
To close all menus at once from any menu, select the Exit item and hold
down the menu/select key until the menu display disappears.
Bosch Security Systems | 2003-08 | Version 2
Download from Www.Somanuals.com. All Manuals Search And Download.
LTC 0335 & LTC 0355 | Installation Manual
EN | 10
Menu Navigation
Press the menu button
MAIN MENU
SHUT/AGC MENU
LEVEL
0
SHUTTER
AGC
AES
ON
ON
SHUT/AGC
BLC
OFF
AUTOBLACK
SYNC
VPHASE
LINE LOCK
0¡
EXIT
EXIT
Main Menu
Shutter/AGC Menu
Press the menu button
for more than 5sec.
LENS WIZARD
DETECTED LENS
DCIRIS
INSTALLER
SET BACK FOCUS NOW
VERSION
00.0010.XX
LENS
AUTO
FAST
SPEED
LENS WIZARD
EXIT
WIZARD
COAX COMM
ON
DETECTED LENS
VIDEO
DEFAULTS
SET BACK FOCUS NOW
EXIT
SET LVL
Lens Wizard Menus
Installer Menu
EXIT
Bosch Security Systems | 2003-08 | Version 2
Download from Www.Somanuals.com. All Manuals Search And Download.
LTC 0335 & LTC 0355 | Installation Manual
EN | 11
Main menu
Function
LEVEL
Selection
Description
-15 - 0 - +15
Adjusts video level.
SHUT/AGC
BLC ON
Select next menu Shutter / Automatic Gain Control menu.
ON
When 'ON', the level is optimized at the center
of OFF the screen. Parts outside the center
may be under- or over-exposed (this is normal).
OFF
SYNC
LINE LOCK
0-358º
Select 'LINE LOCK' to synchronize with the
power INTERNAL supply frequency. Select
'INTERNAL' for use with internal
synchronization (automatically selected with
DC supply).
V PHASE
EXIT
Adjusts the vertical phase offset (when in
'LINE LOCK' mode).
Exit the menu.
Shutter/AGC menu
Function
Selection
AES
Description
SHUTTER
(AES) Auto-shutter sets the optimum shutter
speed FL for manual iris lenses. (FL)
Flickerless mode avoids OFF interference from
light sources (recommended for use with
video-iris or DC-iris lenses only).
AGC
ON/OFF
ON/OFF
Automatic gain control
AUTOBLACK
Autoblack automatically increases the visibility
of details.
EXIT
Exit the menu.
Accessing installer menu
•
To access the installer menu, press and hold the menu/select key
for five seconds.
Bosch Security Systems | 2003-08 | Version 2
Download from Www.Somanuals.com. All Manuals Search And Download.
LTC 0335 & LTC 0355 | Installation Manual
EN | 12
Installer menu
Function
Selection
Description
VERSION
Read-only firmware release number (for
service purposes).
LENS
AUTO
FAST
Automatically detect lens type.
A different lens type can be selected.
SPEED
Selects the response time of DC-iris lenses.
Some lenses require slow lens control to avoid
overshoots.
WIZARD
Access the lens wizard menu.
COAX COM
DEFAULTS
ON/OFF
If OFF Bilinx™ communication is disabled
Select next menu Return all set-up settings to
factory defaults.
EXIT
Exit the menu.
Lens wizard menu
Function
Description
SET BACK FOCUS NOW Back focus the lens (see 'Back focus adjustment'). The
scene is focused at maximum lens opening to ensure
that the object of interest remains in focus in bright and
low-light conditions.
SET LVL
When a Video-iris lens is detected, a level
potentiometer is displayed to obtain the best picture
performance. The lens wizard includes a level detector
meter that must be set to the center using the
potentiometer for best results.
EXIT
Exit the menu.
Bosch Security Systems | 2003-08 | Version 2
Download from Www.Somanuals.com. All Manuals Search And Download.
LTC 0335 & LTC 0355 | Installation Manual
EN | 13
Adjustment procedure DC-iris Lens:
1. Unlock the back focus locking button.
2. Access the "Lens Wizard" menu.
3. The "SET BACK FOCUS NOW" option is highlighted in the
menu.
4. Turn the back focus adjustment as required.
5. Lock the back focus locking button.
6. Exit the menu.
Adjustment procedure Manual-iris Lens:
1. Unlock the back focus locking button.
2. Adjust the lens to the maximum lens opening.
3. Turn the back focus adjustment as required.
4. Lock the back focus locking button.
Adjustment procedure Video-iris Lens:
1. Unlock the back focus locking button.
2. Access the "Lens Wizard" menu.
3. The "SET BACK FOCUS NOW" option is highlighted in the
menu.
4. Turn the back focus adjustment as required.
5. Select the "SETLVL" option in the menu, and the LEVEL bar
appears.
6. Adjust the level potentiometer located on the lens until the
LEVEL bar is in the central position.
7. Lock the back focus locking button.
8. Exit the menu.
Bosch Security Systems | 2003-08 | Version 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Bosch Sicherheitssysteme GmbH
Ludwig-Bölkow-Allee
Bosch Security Systems B.V.
P.O. Box 80002
85521 Ottobrunn
5600 JB Eindhoven
Germany
The Netherlands
3122 165 22651 03-40
© 2003 Bosch Security Systems B.V.
Subject to change Printed in Portugal
Download from Www.Somanuals.com. All Manuals Search And Download.
|