Automatic
washing machine
WM 6111 W
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
1 Your washing machine
4
5 Operating the product
18
Overview . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical specifications . . . . . . . . . . . . . 5
Control panel. . . . . . . . . . . . . . . . . . . . 18
Preparing the machine. . . . . . . . . . . . . 19
Programme selection. . . . . . . . . . . . . . 19
Main programmes . . . . . . . . . . . . . . . 19
Temperature selection . . . . . . . . . . . . . 20
Spin speed selection . . . . . . . . . . . . . . 20
Programme selection and consumption
table . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Auxiliary function selection. . . . . . . . . . 22
Starting the programme. . . . . . . . . . . . 22
Child Lock. . . . . . . . . . . . . . . . . . . . . . 22
Progress of programme. . . . . . . . . . . . 23
Loading door lock . . . . . . . . . . . . . . . . 23
Changing the selections after programme
has started . . . . . . . . . . . . . . . . . . . . . 23
Canceling the programme . . . . . . . . . . 24
End of programme . . . . . . . . . . . . . . . 24
2 Important safety
instructions
6
General safety . . . . . . . . . . . . . . . . . . . . 6
Intended use . . . . . . . . . . . . . . . . . . . . . 6
Children's safety . . . . . . . . . . . . . . . . . . 6
3 Installation
8
Appropriate installation location . . . . . . . 8
Removing packaging reinforcement. . . . 8
Removing the transportation locks. . . . . 8
Connecting water supply. . . . . . . . . . . . 9
Connecting to the drain . . . . . . . . . . . . . 9
Adjusting the feet. . . . . . . . . . . . . . . . . 10
Electrical connection . . . . . . . . . . . . . . 10
First use . . . . . . . . . . . . . . . . . . . . . . . 11
Disposing of packaging material . . . . . 12
Transportation of the product. . . . . . . . 12
Disposing of the old product . . . . . . . . 12
6 Maintenance and cleaning25
Cleaning the detergent drawer. . . . . . . 25
Cleaning the loading door and the
drum . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Cleaning the body and control panel . . 25
Cleaning the water intake filters . . . . . . 25
Draining remaining water and cleaning the
pump filter . . . . . . . . . . . . . . . . . . . . . . 26
4 Preparation
13
Things to be done for energy saving . . 13
Sorting the laundry . . . . . . . . . . . . . . . 13
Preparing laundry for washing . . . . . . . 13
Correct load capacity . . . . . . . . . . . . . 14
Loading the laundry. . . . . . . . . . . . . . . 14
Using detergent and softener . . . . . . . 15
Tips for efficient washing . . . . . . . . . . . 17
7 Troubleshooting
8 Guarantee
9 Service
28
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
3
EN
1 Your washing machine
Overview
8
1
2
3
7
6
4
5
1- Power cable
2- Top panel
3- Control panel
4- Filter cap
5- Adjustable feet
6- Loading door
7- Detergent drawer
8- Drain hose
Download from Www.Somanuals.com. All Manuals Search And Download.
4
EN
Technical specifications
Models
WM6111W
Maximum dry laundry capacity (kg)
Height (cm)
6
84
Width (cm)
60
Depth (cm)
45
Net weight ( 4 kg.)
Electrical input (V/Hz)
Total current (A)
62
230 V / 50Hz
10
Total power (W)
2200
1200
1.00
0.25
Spin speed (rpm max.)
Stand-by mode power (W)
Off-mode power (W)
Technical specifications may be changed without prior notice to improve the quality of
the product.
C
Figures in this manual are schematic and may not match the product exactly.
Values stated on the product labels or in the documentation accompanying it
are obtained in laboratory conditions in accordance with the relevant standards.
Depending on operational and environmental conditions of the product, these values
may vary.
C
C
Download from Www.Somanuals.com. All Manuals Search And Download.
5
EN
2 Important safety instructions
This section contains safety instructions
injury from hot water will occur.
Do not force open the locked loading
door. The loading door will be ready
to open just a few minutes after the
washing cycle comes to an end.
In case of forcing the loading door
to open, the door and the lock
mechanism may get damaged.
Unplug the product when not in use.
Never wash the product by spreading
or pouring water onto it! There is the
risk of electric shock!
Never touch the plug with wet hands!
Never unplug by pulling on the cable,
always pull out by grabbing the plug.
Use detergents, softeners and
supplements suitable for automatic
washing machines only.
Follow the instructions on the textile
that will help protect from risk of personal
injury or property damage. Failure to follow
these instructions shall void any warranty.
•
General safety
•
This product should not be used
by persons with physical, sensory
or mental disorders or unlearned
or inexperienced people (including
children) unless they are attended by
a person who will be responsible for
their safety or who will instruct them
accordingly for use of the product.
Never place the product on a carpet-
covered floor; otherwise, lack of
airflow beneath the machine will cause
electrical parts to overheat. This will
cause problems with your product.
Do not operate the product if the
power cable / plug is damaged. Call
the Authorized Service Agent.
•
•
•
•
•
•
•
•
•
•
tags and on the detergent package.
The product must be unplugged during
installation, maintenance, cleaning and
repairing procedures.
Always have the installation and
repairing procedures carried out
by the Authorized Service Agent.
Manufacturer shall not be held liable
for damages that may arise from
procedures carried out by unauthorized
persons.
Have a qualified electrician connect
a 16-Ampere fuse to the installation
location of the product.
If the product has a failure, it should not
be operated unless it is repaired by the
Authorized Service Agent. There is the
•
risk of electric shock!
•
•
This product is designed to resume
operating in the event of powering on
after a power interruption. If you wish to
cancel the programme, see "Cancelling
the programme" section.
Intended use
•
This product has been designed for
domestic use. It is not suitable for
commercial use and it must not be
used out of its intended use.
Connect the product to a grounded
outlet protected by a fuse complying
with the values in the "Technical
specifications" table. Do not neglect to
have the grounding installation made
by a qualified electrician. Our company
shall not be liable for any damages
that will arise when the product is used
without grounding in accordance with
the local regulations.
•
•
•
The product must only be used for
washing and rinsing of laundry that are
marked accordingly.
The manufacturer waives any
responsibility arisen from incorrect
usage or transportation.
The service life of your product is 10
years. During this period, original spare
parts will be available to operate the
appliance properly.
•
•
The water supply and draining hoses
must be securely fastened and remain
undamaged. Otherwise, there is the
risk of water leakage.
Never open the loading door or remove
the filter while there is still water in the
drum. Otherwise, risk of flooding and
Children's safety
•
Electrical products are dangerous for
the children. Keep children away from
the product when it is in use. Do not
Download from Www.Somanuals.com. All Manuals Search And Download.
6
EN
let them to tamper with the product.
Use child lock to prevent children from
intervening with the product.
Do not forget to close the loading
door when leaving the room where the
product is located.
Store all detergents and additives in a
safe place away from the reach of the
children.
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
7
EN
3 Installation
Refer to the nearest Authorised Service
Agent for installation of the product. To
make the product ready for use, review
the information in the user manual and
make sure that the electricity, tap water
supply and water drainage systems are
appropriate before calling the Authorized
Service Agent. If they are not, call a
Removing packaging
reinforcement
Tilt the machine backwards to remove
the packaging reinforcement. Remove the
packaging reinforcement by pulling the
ribbon.
qualified technician and plumber to have
any necessary arrangements carried out.
Preparation of the location and
C
electrical, tap water and waste water
installations at the place of installation
is under customer's responsibility.
Installation and electrical connections
B
of the product must be carried out
by the Authorized Service Agent.
Manufacturer shall not be held liable
for damages that may arise from
procedures carried out by unauthorized
persons.
Prior to installation, visually check if
A
the product has any defects on it. If
so, do not have it installed. Damaged
products cause risks for your safety.
Removing the
transportation locks
Do not remove the transportation
Make sure that the water inlet and
A
C
locks before taking out the packaging
reinforcement.
discharge hoses as well as the power
cable are not folded, pinched or
crushed while pushing the product into
its place after installation or cleaning
procedures.
Remove the transportation safety
A
bolts before operating the washing
machine, otherwise, the product will be
damaged.
Appropriate installation location
1. Loosen all the bolts with a spanner until
they rotate freely (C).
•
Place the machine on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.
Total weight of the washing machine
and the dryer -with full load- when
they are placed on top of each other
reaches to approx. 180 kilograms.
Place the product on a solid and flat
floor that has sufficient load carrying
capacity!
•
2. Remove transportation safety bolts by
turning them gently.
•
•
•
Do not place the product on the power
cable.
Do not install the product at places
where temperature may fall below 0ºC.
Place the product at least 1 cm away
from the edges of other furniture.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
EN
3. Attach the plastic covers supplied in
the User Manual bag into the holes on
the rear panel. (P)
Keep the transportation safety bolts in
C
a safe place to reuse when the washing
machine needs to be moved again in
the future.
Ensure that the cold and hot water
connections are made correctly when
installing the product. Otherwise, your
laundry will come out hot at the end of
the washing process and wear out.
A
Never move the product without the
transportation safety bolts properly
fixed in place!
C
2. Tighten all hose nuts by hand. Never
use a wrench when tightening the nuts.
Connecting water supply
The water supply pressure required
C
to run the product is between 1 to 10
bars (0.1 – 10 MPa). It is necessary
to have 10 – 80 liters of water flowing
from the fully open tap in one minute
to have your machine run smoothly.
Attach a pressure reducing valve if
water pressure is higher.
If you are going to use the double
C
3. Open the taps completely after making
the hose connection to check for
water leaks at the connection points.
If any leaks occur, turn off the tap and
remove the nut. Retighten the nut
carefully after checking the seal. To
prevent water leakages and damages
caused by them, keep the taps closed
when the machine is not in use.
water-inlet product as a single (cold)
water-inlet unit, you must install the
supplied stopper to the hot water valve
before operating the product. (Applies
for the products supplied with a blind
stopper group.)
If you want to use both water inlets
C
of the product, connect the hot water
hose after removing the stopper and
gasket group from the hot water valve.
(Applies for the products supplied with
a blind stopper group.)
Connecting to the drain
•
The end of the drain hose must be
directly connected to the wastewater
drain or to the washbasin.
Models with a single water inlet should
A
Your house will be flooded if the
hose comes out of its housing during
water discharge. Moreover, there is
risk of scalding due to high washing
temperatures! To prevent such
situations and to ensure smooth water
intake and discharge of the machine,
fix the end of the discharge hose tightly
so that it cannot come out.
not be connected to the hot water
tap. In such a case the laundry will get
damaged or the product will switch to
protection mode and will not operate.
A
Do not use old or used water inlet
A
hoses on the new product. It may
cause stains on your laundry.
1. Connect the special hoses supplied
with the product to the water inlets
on the product. Red hose (left) (max.
90 ºC) is for hot water inlet, blue hose
(right) (max. 25 ºC) is for cold water
inlet.
•
The hose should be attached to a
height of at least 40 cm, and 100 cm at
most.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
EN
•
In case the hose is elevated after
laying it on the floor level or close to
the ground (less than 40 cm above the
ground), water discharge becomes
more difficult and the laundry may
come out excessively wet. Therefore,
follow the heights described in the
figure.
•
To prevent flowing of dirty water back
into the machine and to allow for easy
discharge, do not immerse the hose
end into the dirty water or drive it in the
drain more than 15 cm. If it is too long,
cut it short.
The end of the hose should not be
bent, it should not be stepped on and
the hose must not be pinched between
the drain and the machine.
If the length of the hose is too short,
use it by adding an original extension
hose. Length of the hose may not be
longer than 3.2 m. To avoid water leak
failures, the connection between the
extension hose and the drain hose of
the product must be fitted well with an
appropriate clamp as not to come off
and leak.
1. Loosen the lock nuts on the feet by
hand.
2. Adjust the feet until the product stands
level and balanced.
3. Tighten all lock nuts again by hand.
•
•
Do not use any tools to loosen the lock
nuts. Otherwise, they will get damaged.
A
Electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the
values in the "Technical specifications"
table. Our company shall not be liable
for any damages that will arise when the
product is used without grounding in
accordance with the local regulations.
Adjusting the feet
A
In order to ensure that the product
operates more silent and vibration-free,
it must stand level and balanced on its
feet. Balance the machine by adjusting
the feet. Otherwise, the product
•
•
•
Connection must comply with national
regulations.
Power cable plug must be within easy
reach after installation.
The voltage and allowed fuse or
breaker protection are specified in the
“Technical specifications” section. If the
current value of the fuse or breaker in
the house is less than 13 Amps, have
a qualified electrician install a 13 Amp
may move from its place and cause
crushing and vibration problems.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
EN
fuse.
1
Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol f or
coloured green and yellow or green.
Connect the blue (neutral) wire to the
terminal in the plug marked ‘N’ or
coloured black.
Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or
coloured red.
•
•
The specified voltage must be equal to
your mains voltage.
Do not make connections via extension
cables or multi-plugs.
2
3
Damaged power cables must be
replaced by the Authorized Service
Agents.
B
Electrical requirements
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket in a
readily accessible position.
With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or in the
main fuse box. If in doubt contact a qualified
electrician.
Should the mains lead of the appliance
become damaged or need replacing at
any time, it must be replaced by a special
purpose made mains lead which can only
be obtained from a Authorised Service
Agent.
BThis appliance must be earthed
If the fitted moulded plug is not suitable for
your socket, then the plug should be cut off
and an appropriate plug fitted.
Destroy the old plug, which is cut off as
a plug with a bared cord could cause a
shock hazard if inserted into a socket
elsewhere in the house.
The moulded plug on this appliance
incorporates a 13A fuse. Should the fuse
need to be replaced an ASTA approved
BS1362 fuse of the same rating must be
used. Do not forget to refit the fuse cover.
In the event of losing the fuse cover, the
plug must not be used until a replacement
fuse cover has been fitted. Colour of the
replacement fuse cover must be the same
colour as that visible on the pin face of the
plug. Fuse covers are available from any
good electrical store.
First use
Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in
sections "Important safety instructions" and
"Installation".
To prepare the product for washing laundry,
perform first operation in Drum Cleaning
programme. If your machine is not
featured with Drum Cleaning programme,
use Cottons-90 programme and select
Additional Water or Extra Rinse auxiliary
functions as well. Before starting the
programme, put max. 100 g of powder
Important
Fitting a different plug
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals on your plug, proceed as follows:
Download from Www.Somanuals.com. All Manuals Search And Download.
11
EN
anti-limescale into the main wash
detergent compartment (compartment nr.
II). If the anti-limescale is in tablet form,
put only one tablet into compartment nr.
II. Dry the inside of the bellow with a clean
piece of cloth after the programme has
come to an end.
Disposing of the old product
Dispose of the old product in an
environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn how
to dispose of your product.
For children's safety, cut the power
cable and break the locking mechanism
of the loading door so that it will be
nonfunctional before disposing of the
product.
Use an anti-limescale suitable for the
C
washing machines.
Some water might have remained in
C
the product due to the quality control
processes in the production. It is not
harmful for the product.
Disposing of packaging material
Packaging materials are dangerous to
children. Keep packaging materials in
a safe place away from reach of the
children.
Packaging materials of the product are
manufactured from recyclable materials.
Dispose of them properly and sort
in accordance with recycled waste
instructions. Do not dispose of them with
normal domestic waste.
Transportation of the product
1. Unplug the product before
transporting it.
2. Remove water drain and water supply
connections.
3. Drain the remaining water in the
product completely; see, "Draining
remaining water and cleaning the
pump filter".
4. Install transportation safety bolts
in the reverse order of removal
procedure; see, "Removing the
transportation locks".
Never move the product without the
transportation safety bolts properly
fixed in place!
C
Download from Www.Somanuals.com. All Manuals Search And Download.
12
EN
4 Preparation
Things to be done for
energy saving
Following information will help you use
the product in an ecological and energy-
efficient manner.
Wash with sensitive,
.short programmes
Washing water
temperature
•
Operate the product in the highest
capacity allowed by the programme
you have selected, but do not overload;
see, “Programme and consumption
table”.
Do not use bleach
Bleach can be
used
•
•
•
•
Always follow the instructions on the
detergent packaging.
Wash slightly soiled laundry at low
temperatures.
Use faster programmes for small
quantities of lightly soiled laundry.
Do not use prewash and high
temperatures for laundry that is not
heavily soiled or stained.
Suitable for drier
Do not dry with drier
Hang without
spinning
Can be ironed with
hot iron
•
•
If you plan to dry your laundry in a
dryer, select the highest spin speed
recommended during washing
process.
Do not use detergent in excess of
the amount recommended on the
detergent package.
Non machine-washable
Do not wash
Do not dry-clean
Dry on a hanger
Dry-cleanable
Sorting the laundry
•
Sort laundry according to type of
fabric, colour, and degree of soiling and
allowable water temperature.
Always obey the instructions given on
the garment tags.
Dry horizontally
•
Can be ironed
with warm iron
Do not iron
Preparing laundry for washing
•
Laundry items with metal attachments
such as, underwired bras, belt buckles
or metal buttons will damage the
machine. Remove the metal pieces or
wash the clothes by putting them in a
laundry bag or pillow case.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
EN
and the washing programme desired.
The machine automatically adjusts the
amount of water according to the weight of
the loaded laundry.
Follow the information in the
A
“Programme and consumption table”.
When overloaded, machine’s washing
performance will drop. Moreover, noise
and vibration problems may occur.
Laundry types and their average weights in
the following table are given as examples.
•
Take out all substances in the pockets
such as coins, pens and paper clips,
and turn pockets inside out and brush.
Such objects may damage the product
or cause noise problem.
Put small size clothes such as infant’s
socks and nylon stockings in a laundry
bag or pillow case.
Place curtains in without compressing
them. Remove curtain attachment
items.
Fasten zippers, sew loose buttons and
mend rips and tears.
Wash “machine washable” or “hand
washable” labeled products only with
an appropriate programme.
Do not wash colours and whites
together. New, dark coloured cottons
release a lot of dye. Wash them
separately.
Tough stains must be treated properly
before washing. If unsure, check with a
dry cleaner.
Use only dyes/colour changers
and limescale removers suitable for
machine wash. Always follow the
instructions on the package.
Laundry type
Bathrobe
Napkin
Weight (g)
1200
100
•
•
Duvet cover
Bed Sheet
Pillowcase
Tablecloth
Towel
700
500
200
250
200
•
•
Hand towel
Evening gown
Underclothing
Men’s overalls
Men’s shirt
Men’s pajamas
Blouses
100
200
100
600
200
500
100
•
Loading the laundry
•
•
•
•
Open the loading door.
Place laundry items loosely into the
machine.
•
Push the loading door to close until you
hear a locking sound. Ensure that no
items are caught in the door.
The loading door is locked while a
programme is running. The door
can only be opened a while after the
programme comes to an end.
In case of misplacing the laundry, noise
and vibration problems may occur in
the machine.
•
•
Wash trousers and delicate laundry
turned inside out.
C
Keep laundry items made of Angora
wool in the freezer for a few hours
before washing. This will reduce pilling.
Laundry that are subjected to materials
such as flour, lime dust, milk powder,
etc. intensely must be shaken off
before placing into the machine. Such
dusts and powders on the laundry
may build up on the inner parts of
the machine in time and can cause
damage.
A
•
Correct load capacity
The maximum load capacity depends on
the type of laundry, the degree of soiling
Download from Www.Somanuals.com. All Manuals Search And Download.
14
EN
•
When washing dark coloured clothes
and quilts, it is recommended to use
liquid detergent.
Wash woolens with special detergent
made specifically for woolens.
Use only detergents manufactured
specifically for washing machines.
Using detergent and softener
Detergent Drawer
The detergent drawer is composed of three
compartments:
•
- (I) for prewash
A
- (II) for main wash
– (III) for softener
ADo not use soap powder.
– (*) in addition, there is siphon piece in the
softener compartment.
Adjusting detergent amount
The amount of washing detergent to be
used depends on the amount of laundry,
the degree of soiling and water hardness.
Read the manufacturer’s instructions on
the detergent package carefully and follow
the dosage values.
•
Do not use amounts exceeding the
dosage quantities recommended
on the detergent package to avoid
problems of excessive foam, poor
rinsing, financial savings and finally,
environmental protection.
Use lesser detergent for small amounts
or lightly soiled clothes.
Use concentrated detergents in the
recommended dosage.
The detergent dispenser may be in two
C
different types according to the model
of your machine as seen above.
Detergent, softener and other cleaning
agents
•
•
•
•
•
Add detergent and softener before
starting the washing programme.
Never open the detergent drawer while
the washing programme is running!
When using a programme without
prewash, do not put any detergent
into the prewash compartment
(compartment nr. I).
Using softeners
Pour the softener into the softener
compartment of the detergent drawer.
•
•
•
Use the dosages recommended on the
package.
Do not exceed the (>max<) level
marking in the softener compartment.
If the softener has lost its fluidity, dilute
it with water before putting it in the
detergent drawer.
•
•
In a programme with prewash, do not
put liquid detergent into the prewash
compartment (compartment nr. I).
Do not select a programme with
prewash if you are using a detergent
bag or dispensing ball. Place the
detergent bag or the dispensing ball
directly among the laundry in the
machine.
If you are using liquid detergent, do
not forget to place the liquid detergent
cup into the main wash compartment
(compartment nr. II).
Using liquid detergents
If the product contains a liquid
detergent cup:
•
Make sure that you have placed the
liquid detergent cup in compartment nr.
“II”.
Use the detergent manufacturer’s
measuring cup and follow the
instructions on the package.
Use the dosages recommended on the
package.
•
•
Choosing the detergent type
The type of detergent to be used depends
on the type and colour of the fabric.
•
•
•
Use different detergents for coloured
and white laundry.
Wash your delicate clothes only with
special detergents (liquid detergent,
wool shampoo, etc.) used solely for
delicate clothes.
If the liquid detergent has lost its fluidity,
dilute it with water before putting in the
detergent cup.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
15
EN
detergent between the laundry, close
to the lower part of the drum in future
washings.
Use the tablet or gel detergent without
selecting the prewash function.
C
Using starch
•
Add liquid starch, powder starch or the
dyestuff into the softener compartment
as instructed on the package.
Do not use softener and starch
together in a washing cycle.
Wipe the inside of the machine with
a damp and clean cloth after using
starch.
•
•
Using bleaches
•
If the product does not contain a liquid
detergent cup:
Select a programme with prewash
and add the bleaching agent at the
beginning of the prewash. Do not put
detergent in the prewash compartment.
As an alternative application, select a
programme with extra rinse and add
the bleaching agent while the machine
is taking water from the detergent
compartment during first rinsing step.
Do not use bleaching agent and
detergent by mixing them.
Use just a little amount (approx. 50
ml) of bleaching agent and rinse the
clothes very well as it causes skin
irritation. Do not pour the bleaching
agent onto the clothes and do not use
it for coloured clothes.
•
Do not use liquid detergent for the
prewash in a programme with prewash.
Use the detergent manufacturer’s
measuring cup and follow the
instructions on the package.
Liquid detergent stains your clothes
when used with Delayed Start function.
If you are going to use the Delayed
Start function, do not use liquid
detergent.
•
•
•
•
Using gel and tablet detergent
When using tablet, gel, etc. detergents,
read the manufacturer’s instructions on
the detergent package carefully and
follow the dosage values. If there is not
any instruction on the package, apply the
following.
•
•
When using oxygen based bleaches,
follow the instructions on the package
and select a programme that washes
at a lower temperature.
Oxygen based bleaches can be used
together with detergents; however,
if its thickness is not the same with
the detergent, put the detergent first
into the compartment nr. “II” in the
detergent drawer and wait until the
detergent flows while the machine
is taking in water. Add the bleaching
agent from the same compartment
while the machine is still taking in water.
•
If the gel detergent thickness is fluidal
and your machine does not contain
a special liquid detergent cup, put
the gel detergent into the main wash
detergent compartment during first
water intake. If your machine contains
a liquid detergent cup, fill the detergent
into this cup before starting the
programme.
If the gel detergent thickness is not
fluidal or in the shape of capsule liquid
tablet, put it directly into the drum
before washing.
•
•
Using limescale remover
•
Put tablet detergents into the main
wash compartment (compartment
nr. II) or directly into the drum before
washing.
When required, use limescale removers
manufactured specifically for washing
machines only.
Always follow instructions on the
package.
•
Tablet detergents may leave residues
in the detergent compartment. If you
encounter such a case, place the tablet
C
Download from Www.Somanuals.com. All Manuals Search And Download.
16
EN
Tips for efficient washing
Clothes
Colors
(Recommended
Light colours and
whites
Delicates/
Woolens/Silks
Dark colors
(Recommended (Recommended
(Recommended
temperature
range based
temperature
range based
temperature range temperature range
based on soiling
level: 40-90C)
based on soiling level:
cold-40C)
on soiling level: on soiling level:
cold-40C)
cold-30C)
It may be
necessary to pre-
treat the stains of
perform prewash.
Powder and
Powder and
liquid detergents
recommended for
colours can be
used at dosages
recommended for
liquid detergents
recommended
for whites can be
used at dosages
recommended
for heavily soiled
clothes. It is
Liquid
Prefer liquid
detergents
produced for
detergents
suitable for
Heavily Soiled
heavily soiled clothes. colours and dark delicate clothes.
(difficult stains
such as grass,
coffee, fruits
and blood.)
It is recommended
to use powder
colours can be Woollen and silk
used at dosages clothes must
recommended be washed with
for heavily soiled special woollen
detergents to clean
clay and soil stains
recommended
to use powder
and the stains that are clothes.
detergents.
detergents to clean sensitive to bleaches.
clay and soil stains Use detergents
and the stains that without bleach.
are sensitive to
bleaches.
Powder and
Liquid
Prefer liquid
detergents
produced for
Powder and
liquid detergents
recommended for
colours can be
used at dosages
recommended for
normally soiled
clothes. Use
Normally Soiled
detergents
suitable for
liquid detergents
recommended
for whites can be
used at dosages
recommended for
normally soiled
clothes.
colours and dark delicate clothes.
colours can be Woollen and silk
used at dosages clothes must
recommended be washed with
for normally
soiled clothes.
(For example,
stains caused
by body on
collars and
cuffs)
special woollen
detergents.
detergents without
bleach.
Powder and
Liquid
Prefer liquid
detergents
produced for
Powder and
liquid detergents
recommended for
colours can be
used at dosages
recommended for
detergents
suitable for
liquid detergents
recommended
for whites can be
used at dosages
recommended for
Lightly Soiled
colours and dark delicate clothes.
colours can be Woollen and silk
used at dosages clothes must
(No visible
stains exist.)
lightly soiled clothes. recommended be washed with
lightly soiled clothes. Use detergents
without bleach.
for lightly soiled special woollen
clothes. detergents.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
EN
5 Operating the product
Control panel
2
1
4
6
5
8
7
1 - Programme Selection knob
2 - Spin Speed Adjustment button*
3 - Temperature Adjustment button*
4 - Start / Pause / Cancel button
5 - Auxiliary Function buttons
6 - On / Off button
7 - Programme Follow-up indicator
8 - Loading Door light*
* Varies depending on the model of your machine.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
EN
water temperature may differ from the
declared cycle temperature. Programme
duration may automatically be shortened
during later stages of the programme if you
wash less amount (e.g. ½ capacity or less)
of laundry. In this case energy and water
consumption will be further decreased
giving you the opportunity for a more
economical wash. This feature is available
for certain models having remaining time
display.
Preparing the machine
1. Make sure that the hoses are
connected tightly.
2. Plug in your machine.
3. Turn the tap on completely.
4. Place the laundry in the machine.
5. Add detergent and fabric softener.
Programme selection
1. Select the programme suitable for
the type, quantity and soiling degree
of the laundry in accordance with the
"Programme and consumption table"
and the temperature table below.
• Synthetics
Use this programme to wash your synthetic
clothes (shirts, blouses, synthetic/cotton
blends, etc.). It washes with a gentle action
and has a shorter washing cycle compared
to the Cottons programme.
For curtains and tulle, use the Synthetic
40˚C programme with prewash function
selected. As their meshed texture causes
excessive foaming, wash the veils/tulle
by putting little amount of detergent into
the main wash compartment. Do not put
detergent in the prewash compartment.
• Woollens
Use this programme to wash your woolen
clothes. Select the appropriate temperature
complying with the tags of your clothes.
Use appropriate detergents for woolens.
Additional programmes
For special cases, additional programmes
are available in the machine.
Heavily soiled white cottons
90˚C
and linens. (coffee table
covers, tableclothes, towels,
bed sheets, etc.)
Normally soiled, coloured,
fade proof cottons or
synthetic clothes (shirt,
nightgown, pajamas, etc.)
and lightly soiled white
linens (underwear, etc.)
60˚C
Blended laundry including
delicate textile (veil curtains,
etc.), synthetics and
woolens.
40˚C-
30˚C-
Cold
2. Select the desired programme with the
Programme Selection button.
Programmes are limited with the
Additional programmes may differ
C
C
highest spin speed appropriate for that
particular type of fabric.
according to the model of the machine.
• Delicates 30
When selecting a programme, always
C
Use this programme to wash your delicate
clothes. It washes with a gentle action
without any interim spin compared to the
Synthetics programme.
consider the type of fabric, colour,
degree of soiling and permissible water
temperature.
Always select the lowest required
temperature. Higher temperature
means higher power consumption.
For further programme details, see
"Programme and consumption table".
C
• Hand Wash
Use this programme to wash your woolen/
delicate clothes that bear “not machine-
washable” tags and for which hand wash
is recommended. It washes laundry with
a very gentle washing action to not to
damage clothes.
C
Main programmes
Depending on the type of fabric, use the
following main programmes.
• Mini 30
Use this programme to wash your little
amount of lightly soiled cotton clothes in a
short time (30 minutes).
• Cottons
You may wash your normally soiled
durable cotton and linen laundry in this
programme with the highest energy and
water saving compared to all other wash
programmes suitable for cottons. Actual
• A Class 40
Use this programme to wash your laundry
for which you cannot use Cottons 60 °C
Download from Www.Somanuals.com. All Manuals Search And Download.
19
EN
programme. It gives the same result with
the Cottons 60 °C programme by washing
for a longer time at 40 °C, thus enabling
energy saving.
laundry at the desired speed by using this
button.
In models not equipped with Spin Speed
Adjustment button, spin will be performed
at the recommended speed for the
selected programme.
Special programmes
For specific applications, select any of the
following programmes.
• Rinse
Use this programme when you want to
rinse or starch separately.
• Spin+Drain
If you wish to take out your laundry
C
without spinning, switch the Spin
Speed Adjustment button to No Spin
position.
Use this programme to apply an additional
spin cycle for your laundry or to drain the
water in the machine.
Before selecting this programme, select the
desired spin speed and press Start / Pause
/ Cancel button. First, the machine will
drain the water inside of it. Then, it will spin
the laundry with the set spin speed and
drain the water coming out of them.
If you wish to drain water only without
spinning your laundry, select the
Pump+Spin programme and then select
the "No Spin" function with the help of Spin
Speed Adjustment button depending on
the model of your machine and press Start
/ Pause button.
If your machine is not equipped
C
with Spin Speed Adjustment button and
No Spin auxiliary function and if you wish to
drain the water only without spinning your
laundry, select the Pump+Spin programme
and press Start / Pause button. Machine
will switch to spin step once it completes
pump step. Press Start / Pause / Cancel
button to stop the machine as soon as you
see the drum rotating.
Use a lower spin speed for delicate
laundries.
C
Temperature selection
In models equipped with Temperature
Adjustment button, you can wash your
clothes at the desired temperature by using
this button.
To prevent damage on your laundry, do
A
not select a temperature that exceeds
the one recommended for your laundry
in the “Programme and consumption
table".
Spin speed selection
In models equipped with Spin Speed
Adjustment button, you can spin your
Download from Www.Somanuals.com. All Manuals Search And Download.
20
EN
Programme selection and consumption table
EN
2
Programme
Cottons
Cottons
Cottons
Cottons
Cottons
Cottons
90
60**
60**
40**
40
6
6
125
148
148
132
105
95
53
52
48
48
53
53
53
52
52
52
52
45
1.65
1.01
0.86
0.62
1.33
0.16
0.81
0.92
0.56
0.30
0.15
0.36
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3
3
6
Cold
40
6
A Class 40
Synthetics
Synthetics
Synthetics
Synthetics
Delicates 30
6
160
113
125
95
60
2.5
2.5
2.5
2.5
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
40
30
Cold
30
90
65
Woollens
Woollens
Hand Wash
Mini 30
40
Cold
30
1.5
1.5
1
60
50
45
30
45
45
32
43
0.36
0.02
0.21
0.17
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
30
2.5
• : Selectable
* : Automatically selected, no canceling.
**: Energy Label programme (EN 60456 Ed.3)
- : See the programme description for maximum load.
Water and power consumption may vary subject to the changes in water pressure,
water hardness and temperature, ambient temperature, type and amount of laundry,
selection of auxiliary functions and spin speed, and changes in electric voltage.
C
CThe auxiliary functions in the table may vary according to the model of your machine.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
EN
In models equipped with Spin Speed
Adjustment button, select the Spin Speed
and press Start / Pause / Cancel button if
you want to spin the laundry held in water.
In models not equipped with Spin Speed
Adjustment button, select Spin+Pump
programme if you want to spin your laundry
held in water.
Auxiliary function selection
Select the desired auxiliary functions before
starting the programme. Furthermore, you
can also select or cancel auxiliary functions
that are suitable to the running programme
without pressing the Start / Pause / Cancel
button when the machine is operating. For
this, the machine must be in a step before
the auxiliary function you are going to
select or cancel.
In these models, you need to stop the
C
machine by pressing Start / Pause /
Cancel button before switching to spin
step and after pump step is completed
and the water in the machine is
drained. Thus, water inside the
machine is drained and your laundry is
not spun.
If the auxiliary function cannot be selected
or canceled, light of the relevant auxiliary
function will blink 3 times to warn the user.
Some functions cannot be selected
C
together. If a second auxiliary function
conflicting with the first one is selected
before starting the machine, the
function selected first will be canceled
and the second auxiliary function
selection will remain active.
• No Heat
Use this function if you want to wash your
laundry in cold water.
• No Spin
Use this function if you do not want
your clothes be spun at the end of the
programme.
An auxiliary function that is not
C
compatible with the programme cannot
be selected. (See "Programme and
consumption table")
• Spin speed reduction
Auxiliary Function buttons may vary
This function allows spinning of laundry at a
speed lower than the maximum spin speed
of the machine.
C
according to the model of the machine.
• Prewash
When Spin Reduction button is pressed,
spin speed will be limited to the minimum
speed specified on the control panel.
Starting the programme
1. Press Start / Pause / Cancel button to
start the programme.
2. Start / Pause / Cancel button lights up
to indicate that the programme has
started.
3. Loading door is locked and Loading
Door light turns off.
A Prewash is only worthwhile for heavily
soiled laundry. Not using the Prewash will
save energy, water, detergent and time.
As their meshed texture causes
C
excessive foaming, wash the veils/tulle
by putting little amount of detergent
into the main wash compartment.
Do not put detergent in the prewash
compartment.
• Extra Rinse
This function enables the machine to
make another rinsing in addition to the one
already made after the main wash. Thus,
the risk for sensitive skins (babies, allergic
skins, etc.) to be effected by the minimal
detergent remnants on the laundry can be
reduced.
Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
• Rinse Hold
You can switch on and off the machine
C
with On / Off button when the Child
Lock is active. When you switch on the
machine again, programme will resume
from where it has stopped with the
child lock enabled.
If you are not going to unload your
clothes immediately after the programme
completes, you can use rinse hold function
to keep your laundry in the final rinsing
water in order to prevent them from getting
wrinkled when there is no water in the
machine.
To activate the Child Lock:
Press and hold 1st and 2nd Auxiliary
Function buttons for 3 seconds
Download from Www.Somanuals.com. All Manuals Search And Download.
22
EN
simultaneously after washing programme
has started. 1. The 1st Auxiliary Function
light flashes continuously.
Even if you select a new program
by changing the position of the
Programme Selection knob while the
machine is running or in Pause mode,
the programme selected first will
continue. You must cancel the current
programme to change the washing
programme. See "Canceling the
programme".
C
To deactivate the Child Lock:
Child lock must be deactivated to start a
new programme after the programme has
finished or to interrupt a running program.
Press and hold 1st and 2nd Auxiliary
Function buttons for 3 seconds
simultaneously to disable child lock.
Progress of programme
Changing the auxiliary function, speed
and temperature
Depending on the step the programme has
reached, you may cancel or activate the
auxiliary functions; see, "Auxiliary function
selection".
Progress of a running programme can
be followed from the Programme Follow-
up indicator. At the beginning of every
programme step, the relevant indicator light
will turn on and light of the completed step
will turn off.
To change the auxiliary function, speed and
temperature settings while a program is
running, you need to switch the machine to
Pause mode. Press Start / Pause / Cancel
button to switch the machine into Pause
mode. In this case, Start / Pause / Cancel
light flashes.
You can also change the speed and
temperature settings; see, "Spin speed
selection" and "Temperature selection".
Adding or taking out laundry
1. Press Start / Pause / Cancel button to
switch the machine to pause mode.
2. Wait until the Loading Door can be
opened.
If the machine does not pass to the
If the Loading Door light does not
C
C
spinning step, Rinse Hold function
might be active or the automatic
unbalanced load detection system
might be activated due to the
unbalanced distribution of the laundry
in the machine.
turn on in 1-2 minutes, it means that
the water level in the machine is not
suitable and laundry cannot be added.
You can resume the programme by
pressing Start / Pause / Cancel button.
3. Open the Loading Door and add or
take out the laundry.
Loading door lock
4. Close the Loading Door.
There is a locking system on the loading
door of the machine that prevents opening
of the door in cases when the water level is
unsuitable.
5. Make changes in auxiliary functions,
temperature and speed settings if
necessary.
6. Press Start / Pause / Cancel button to
start the machine.
When machine is switched to Pause mode,
it checks the level of the water inside. If
the level is suitable, Loading Door light
illuminates steadily within 1-2 minutes and
the loading door can be opened.
If the Loading Door light is not on, Loading
Door cannot be opened. If you are obliged
to open the Loading Door while the
Loading Door light is off, you must cancel
the current programme; see "Canceling the
programme".
Changing the selections after
programme has started
To change your settings after the program
has started, you have to switch the
machine to Pause mode first.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
EN
Canceling the programme
Press and hold Start / Pause / Cancel
button for 3 seconds to cancel the current
programme. At the end of this period,
machine can drain the water inside it or
can take in and drain water up to 3 times
to cool down the laundry. Washing and End
lights turn on.
Once draining is complete, Start / Pause
/ Cancel and Washing lights turn off, and
Loading Door light starts flashing.
When the Loading Door is openable,
Loading Door light turns on and remains lit.
In this case, you can select and start the
new programme.
End of programme
End light in the programme follow-up
indicator will light up once the programme
comes to an end.
1. Press On / Off button to switch off the
machine.
2. Take out your laundry and close the
loading door. Your machine is ready for
the next washing cycle.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
EN
6 Maintenance and cleaning
inside of the bellow with a clean piece of
cloth after the programme has come to an
end.
Service life of the product extends and
frequently faced problems decrease if
cleaned at regular intervals.
Cleaning the detergent drawer
Clean the detergent drawer at regular
intervals (every 4-5 washing cycles)
as shown below in order to prevent
accumulation of powder detergent in time.
Repeat Drum Cleaning process in every
C
2 months.
Use an anti-limescale suitable for the
washing machines.
C
After every washing make sure that no
foreign substance is left in the drum.
1. Press the dotted point on the siphon
in the softener compartment and pull
towards you until the compartment is
removed from the machine.
If the holes on the bellow shown in the
figure is blocked, open the holes using a
toothpick.
If more than normal amount of water
C
Foreign metal substances in your
and softener mixture starts to gather in
the softener compartment, the siphon
must be cleaned.
C
machine will cause rust stains. Clean
the stains on the drum surface by using
cleaning agents for stainless steel.
Never use steel wool or wire wool.
2. Wash the detergent drawer and the
siphon with plenty of lukewarm water
in a washbasin. Wear protective gloves
or use an appropriate brush to avoid
touching of the residues in the drawer
with your skin when cleaning.
3. Insert the drawer back into its place
after cleaning and make sure that it is
seated well.
Cleaning the body and
control panel
Wipe the body of the machine with soapy
water or non-corrosive mild gel detergents
as necessary, and dry with a soft cloth.
Use only a soft and damp cloth to clean
the control panel.
Cleaning the loading
door and the drum
Never use sponge or scrub materials.
These will damage the painted and
plastic surfaces.
A
Residues of softener, detergent and dirt
may accumulate in your machine in time
and may cause unpleasant odours and
washing complaints. To avoid this, use
the Drum Cleaning programme. If your
machine is not featured with Drum Cleaning
programme, use Cottons-90 programme
and select Additional Water or Extra Rinse
auxiliary functions as well. Before starting
the programme, put max. 100 g of powder
anti-limescale into the main wash detergent
compartment (compartment nr. II). If the
anti-limescale is in tablet form, put only
one tablet into compartment nr. II. Dry the
Cleaning the water intake filters
There is a filter at the end of each water
intake valve at the rear of the machine
and also at the end of each water intake
hose where they are connected to the tap.
These filters prevent foreign substances
and dirt in the water to enter the washing
machine. Filters should be cleaned as they
do get dirty.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
EN
the water in the machine cools down.
2. Open the filter cap.
If the filter cap is composed of two
pieces, press the tab on the filter cap
downwards and pull the piece out
towards yourself.
1. Close the taps.
2. Remove the nuts of the water intake
hoses to access the filters on the water
intake valves. Clean them with an
appropriate brush. If the filters are too
dirty, take them out by means of pliers
and clean them.
If the filter cap is one piece, pull the cap
from both sides at the top to open.
3. Take out the filters on the flat ends of
the water intake hoses together with
the gaskets and clean thoroughly under
running water.
4. Replace the gaskets and filters carefully
in their places and tighten the hose
nuts by hand.
You can remove the filter cover by
Draining remaining water and
C
slightly pushing downwards with a thin
plastic tipped tool, through the gap
above the filter cover. Do not use metal
tipped tools to remove the cover.
3. Some of our products have emergency
draining hose and some does not have.
Follow the steps below to discharge
the water.
cleaning the pump filter
The filter system in your machine prevents
solid items such as buttons, coins and
fabric fibers clogging the pump impeller
during discharge of washing water. Thus,
the water will be discharged without any
problem and the service life of the pump
will extend.
If the machine fails to drain water, the
pump filter is clogged. Filter must be
cleaned whenever it is clogged or in every
3 months. Water must be drained off first
to clean the pump filter.
Discharging the water when the product
has an emergency draining hose:
In addition, prior to transporting the
machine (eg., when moving to another
house) and in case of freezing of the water,
water may have to be drained completely.
Foreign substances left in the pump
filter may damage your machine or may
cause noise problem.
A
a. Pull the emergency draining hose out
from its seat
In order to clean the dirty filter and
discharge the water:
1. Unplug the machine to cut off the
supply power.
b. Place a large container at the end
of the hose. Drain the water into the
container by pulling out the plug at the
end of the hose. When the container
is full, block the inlet of the hose by
replacing the plug. After the container
Temperature of the water inside the
machine may rise up to 90 ºC. To avoid
burning risk, filter must be cleaned after
A
Download from Www.Somanuals.com. All Manuals Search And Download.
26
EN
is emptied, repeat the above procedure
to drain the water in the machine
completely.
c. When draining of water is finished,
close the end by the plug again and fix
the hose in its place.
d. Turn the pump filter to take it out.
Discharging the water when the product
does not have an emergency draining
hose:
a. Place a large container in front of the
filter to catch water from the filter.
b. Loosen pump filter (anticlockwise) until
water starts to flow. Fill the flowing
water into the container you have
placed in front of the filter. Always keep
a piece of cloth handy to absorb any
spilled water.
c. When the water inside the machine is
finished, take out the filter completely
by turning it.
4. Clean any residues inside the filter as
well as fibers, if any, around the pump
impeller region.
5. Install the filter.
If your product has a water jet feature,
A
be sure to fit the filter into its housing
in the pump. Never force the filter
while installing it into its housing. Seat
the filter into its place completely.
Otherwise, water may leak from the
filter cap.
6. If the filter cap is composed of two
pieces, close the filter cap by pressing
on the tab. If it is one piece, seat the
tabs in the lower part into their places
first, and then press the upper part to
close.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
EN
7 Troubleshooting
Programme cannot be started or selected.
•
Washing machine has switched to self protection mode due to a supply problem
(line voltage, water pressure, etc.). >>> Press and hold Start / Pause / Cancel
button for 3 seconds to reset the machine to factory settings. (See "Canceling the
programme")
Water in the machine.
•
Some water might have remained in the product due to the quality control
processes in the production. >>> This is not a failure; water is not harmful to the
machine.
There is water leaking from the bottom of the washing machine.
•
Likely problems with hoses or the pump filter. >>> Be sure the seals of the water
inlet hoses are securely fitted. Attach the hose to the tap tightly.
Pump filter might not be closed fully. >>> Make sure that the pump filter is
completely closed.
•
Machine does not fill with water.
•
•
•
•
Tap is turned off. >>> Open the inlet water taps fully.
Water inlet hose is bent. >>> Flatten the water inlet hose.
Water inlet filter is clogged. >>> Clean the water inlet filter.
The loading door is ajar. >>> Close the Loading Door.
Machine does not drain water.
•
•
Water drain hose might be clogged or twisted. >>> Clean or flatten the hose.
Pump filter is clogged. >>> Clean the pump filter.
Machine vibrates or makes noise.
•
Machine might be standing unbalanced. >>> Adjust the feet to level the machine.
•
A hard substance might have entered into the pump filter. >>> Clean the pump
filter.
•
•
•
Transportation safety bolts are not removed. >>> Remove the transportation
safety bolts.
Laundry quantity in the machine might be too little. >>> Add more laundry to the
machine.
Machine might be overloaded with laundry. >>> Take out some of the laundry
from the machine or distribute the load by hand to balance it homogenously in the
machine.
•
Machine might be leaning on a rigid item. >>> Make sure that the machine is not
leaning on anything.
Machine stopped shortly after the programme started.
•
Machine might have stopped temporarily due to low voltage. >>> It will resume
running when the voltage restores to the normal level.
Machine directly discharges the water it takes in.
•
Draining hose might not be at adequate height. >>> Connect the water draining
hose as described in the operation manual.
No water can be seen in the machine during washing.
The water level is not visible from outside of the washing machine. This is not a
failure.
C
Download from Www.Somanuals.com. All Manuals Search And Download.
28
EN
Loading door cannot be opened.
•
•
•
Door lock is activated because of the water level in the machine. >>> Drain the
water by running the Pump or Spin programme.
Machine is heating up the water or it is at the spinning cycle. >>> Wait until the
programme completes.
Child lock is engaged. Door lock will be deactivated a couple of minutes after
the programme has come to an end. >>> Wait for a couple of minutes for
deactivation of the door lock.
Washing takes longer time than the one specified in the manual.
•
Water pressure is low. >>> Machine waits until taking in adequate amount of
water to prevent poor washing quality due to the decreased amount of water.
Therefore, the washing time extends.
•
•
Voltage might be low. >>> Washing time is prolonged to avoid poor washing
results when the supply voltage is low.
Input temperature of water might be low. >>> Required time to heat up the water
extends in cold seasons. Also, washing time can be lengthened to avoid poor
washing results.
•
•
Number of rinses and/or amount of rinse water might have increased. >>>
Machine increases the amount of rinse water when good rinsing is needed and
adds an extra rinsing step if necessary.
Excessive foam might have occurred and automatic foam absorption system
might have been activated due to too much detergent usage. >>> Use
recommended amount of detergent.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
C
Programme time does not countdown. (On models with display)
•
Timer may stop during water intake. >>> Timer indicator will not countdown until
the machine takes in adequate amount of water. The machine will wait until there
is sufficient amount of water to avoid poor washing results due to lack of water.
Timer indicator will resume countdown after this.
•
•
Timer may stop during heating step. >>> Timer indicator will not countdown until
the machine reaches the selected temperature.
Timer may stop during spinning step. >>> Automatic unbalanced load detection
system might be activated due to the unbalanced distribution of the laundry in the
drum.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
C
Programme time does not countdown.
•
There might be an imbalance of laundry in the machine. >>> Automatic
unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the drum.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
C
Download from Www.Somanuals.com. All Manuals Search And Download.
29
EN
Machine does not switch to spinning step.
•
There might be an imbalance of laundry in the machine. >>> Automatic
unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the drum.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
The machine will not spin if water is not drained completely. >>> Check the filter
and the draining hose.
Excessive foam might have occurred and automatic foam absorption system
might have been activated due to too much detergent usage. >>> Use
recommended amount of detergent.
C
•
•
Washing performance is poor: Laundry turns gray.
•
Insufficient amount of detergent was used over a long period of time. >>> Use
the recommended amount of detergent appropriate for water hardness and the
laundry.
•
•
Washing was made at low temperatures for a long time over a long period of time.
>>> Select the proper temperature for the laundry to be washed.
Insufficient amount of detergent is used with hard waters. >>> Using insufficient
amount of detergent with hard water causes the soil to stick on the cloth and this
turns the cloth into gray in time. It is difficult to eliminate graying once it happens.
Use the recommended amount of detergent appropriate for water hardness and
the laundry.
•
•
Too much detergent is used. >>> Use the recommended amount of detergent
appropriate for water hardness and the laundry.
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Stains persist or the laundry is not whitened.
•
•
•
•
•
•
Insufficient amount of detergent is used. >>> Use recommended amount of
detergent appropriate for the laundry.
Excessive laundry was loaded in. >>> Do not load the machine in excess. Load
with amounts recommended in the "Programme and consumption table".
Wrong programme and temperature were selected. >>> Select the proper
programme and temperature for the laundry to be washed.
Wrong type of detergent is used. >>> Use original detergent appropriate for the
machine.
Detergent is put in the wrong compartment. >>> Put the detergent in the correct
compartment. Do not mix the bleaching agent and the detergent with each other.
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Oily stains appeared on the laundry.
•
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Clothes smell unpleasantly.
•
Odours and bacteria layers are formed on the drum as a result of continuous
washing at lower temperatures and/or in short programmes. >>> Leave the
detergent drawer as well as the loading door of the machine ajar after each
washing. Thus, a humid environment favorable for bacteria cannot occur in the
machine.
•
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Download from Www.Somanuals.com. All Manuals Search And Download.
30
EN
Colour of the clothes faded.
•
•
Excessive laundry was loaded in. >>> Do not load the machine in excess.
Detergent in use is damp. >>> Keep detergents closed in an environment free of
humidity and do not expose them to excessive temperatures.
•
•
A higher temperature is selected. >>> Select the proper programme and
temperature according to the type and soiling degree of the laundry.
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
It does not rinse well.
•
The amount, brand and storage conditions of the detergent used are
inappropriate. >>> Use a detergent appropriate for the washing machine and
your laundry. Keep detergents closed in an environment free of humidity and do
not expose them to excessive temperatures.
Detergent is put in the wrong compartment. >>> If detergent is put in the
prewash compartment although prewash cycle is not selected, machine can take
this detergent during rinsing or softener step. Put the detergent in the correct
compartment.
•
•
•
Pump filter is clogged. >>> Check the filter.
Drain hose is folded. >>> Check the drain hose.
Laundry became stiff after washing.
•
Insufficient amount of detergent is used. >>> Using insufficient amount of
detergent for the water hardness can cause the laundry to become stiff in time.
Use appropriate amount of detergent according to the water hardness.
Detergent is put in the wrong compartment. >>> If detergent is put in the
prewash compartment although prewash cycle is not selected, machine can take
this detergent during rinsing or softener step. Put the detergent in the correct
compartment.
•
•
•
Detergent might be mixed with the softener. >>> Do not mix the softener with
detergent. Wash and clean the dispenser with hot water.
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Laundry does not smell like the softener.
•
Detergent is put in the wrong compartment. >>> If detergent is put in the
prewash compartment although prewash cycle is not selected, machine can take
this detergent during rinsing or softener step. Wash and clean the dispenser with
hot water. Put the detergent in the correct compartment.
•
•
Detergent might be mixed with the softener. >>> Do not mix the softener with
detergent. Wash and clean the dispenser with hot water.
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Download from Www.Somanuals.com. All Manuals Search And Download.
31
EN
Detergent residue in the detergent drawer.
•
Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in
detergent.
•
Detergent has gotten damp. >>> Keep detergents closed in an environment free
of humidity and do not expose them to excessive temperatures.
Water pressure is low. >>> Check the water pressure.
The detergent in the main wash compartment got wet while taking in the prewash
water. Holes of the detergent compartment are blocked. >>> Check the holes
and clean if they are clogged.
There is a problem with the detergent drawer valves. >>> Call the Authorized
Service Agent.
Detergent might be mixed with the softener. >>> Do not mix the softener with
detergent. Wash and clean the dispenser with hot water.
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
•
•
•
•
•
There is detergent left on the laundry.
•
Excessive laundry was loaded in. >>> Do not load the machine in excess.
Wrong programme and temperature were selected. >>> Select the proper
programme and temperature for the laundry to be washed.
Wrong detergent was used. >>> Select the proper detergent for the laundry to be
washed.
•
•
•
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Too much foam forms in the machine.
•
•
•
•
•
•
•
Improper detergents for the washing machine are being used. >>> Use
detergents appropriate for the washing machine.
Excessive amount of detergent is used. >>> Use only sufficient amount of
detergent.
Detergent was stored under improper conditions. >>> Store detergent in a closed
and dry location. Do not store in excessively hot places.
Some meshed laundry such as tulle may foam too much because of their texture.
>>> Use smaller amounts of detergent for this type of item.
Detergent is put in the wrong compartment. >>> Put the detergent in the correct
compartment.
Softener is being taken early. >>> There may be problem in the valves or in the
detergent dispenser. Call the Authorized Service Agent.
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Download from Www.Somanuals.com. All Manuals Search And Download.
Foam is overflowing from the detergent drawer.
•
Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and
pour into the main wash compartment of the detergent drawer.
Put detergent into the machine suitable for the programmes and maximum loads
indicated in the “Programme and consumption table”. When you use additional
chemicals (stain removers, bleaches and etc), reduce the amount of detergent.
C
Laundry remains wet at the end of the programme
•
Excessive foam might have occurred and automatic foam absorption system might
have been activated due to too much detergent usage. >>> Use recommended
amount of detergent.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
C
If you cannot eliminate the problem although you follow the instructions in this section,
consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional
product yourself.
A
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Guarantee
Your new Beko product is guaranteed
against the cost of breakdown repairs
for twelve months from the date of the
original purchase.
Booklet provided.
•
Professional installation by a qualified
Electrical Domestic Appliance Installer
is recommended for all Washing
Machines, Dishwashers and Electric
Cookers
What is covered?
•
•
•
Gas Cookers must only be installed by
a CORGI (or BORD GAIS) registered
Gas Installer.
The guarantee is given only within the
boundaries of the United Kingdom
and the Republic of Ireland.
The guarantee is applicable only to
new products and is not transferable if
the product is resold.
•
•
•
Repairs necessary as a result of faulty
materials, defective components or
manufacturing defect.
The cost of functional replacement
parts, but excluding consumable
items.
The labour costs of a Beko approved
repairer to carry out the repair.
•
•
Beko disclaims any liability for
incidental or consequential damages.
The guarantee does not in anyway
diminish your statutory or legal rights.
What is not covered?
•
Transit, delivery or accidental damage
or misuse and abuse.
Cabinet or appearance parts,
including knobs, flaps, handles or
container lids.
•
Should you experience any difficulty in
obtaining service please contact the Beko
Customer Help-Line.
Tel: 0845 600 4911
e-mail:[email protected]
•
•
Accessories or consumable items
including but not limited to, ice trays,
scrapers, cutlery baskets, filters and
light bulbs.
Repairs required as a result of
unauthorised repair or inexpert
installation that fails to meet the
requirements contained in the user
instruction book.
•
•
Repairs to products used on
commercial or non-residential
household premises.
Loss of frozen food in freezers or
fridge/freezers. (Food loss insurance is
often included within your household
contents insurance policy, or may be
available separately from your retailer).
Important notes.
•
Your Beko product is designed and
built for domestic household use only.
The guarantee will be void if the
product is installed or used in
•
commercial or non-residential
domestic household premises.
The product must be correctly
installed, located and operated in
accordance with the instructions
contained in the User Instructions
•
Download from Www.Somanuals.com. All Manuals Search And Download.
34
EN
9 Service
Please keep your purchase receipt or
other proof of purchase in a safe place;
you will need to have it should the product
require attention under guarantee.
service can be obtained at a charge.
Should you experience any difficulty in
obtaining service please contact the Beko
Customer Help-Line.
Tel: 0845 600 4911
e-mail:[email protected]
You should also complete the details
below; it will help us assist you when
requesting service. (The model number
is printed on the Instruction Booklet and
the serial number is printed on the Rating
Label affixed to the appliance)
Model No:
Serial No:
Retailer:
Date of purchase:
For service under guarantee simply
telephone the appropriate number below
UK Mainland & Northern Ireland
Fridges & Freezers
Electric Cookers
Gas &
0845 600 4903
0845 600 4902
0845 600 4905
Dual Fuel Cookers
Washing Machines &
Dishwashers
0845 600 4906
Republic of Ireland
All Refrigeration,
All Cookers
01 862 3411
Washing Machines & Dishwashers
Before requesting service please
check the trouble-shooting guide in the
Operating Instructions as a charge may be
levied where no fault is found even though
your product may still be under guarantee.
Service once the manufacturers
guarantee has expired.
If you have purchased an extended
guarantee please refer to the instructions
contained within the extended guarantee
agreement document. Otherwise please
call the appropriate number above where
Download from Www.Somanuals.com. All Manuals Search And Download.
35
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
|