Bosch Appliances Digital Camera LTC 0495 User Manual

DinionXF  
LTC 0620 & LTC 0495 series Day/Night cameras  
Installation Instructions  
Installatiehandleiding  
15-bit digital day/night  
EN camera  
15-bits digitale dag/nacht-  
NL camera  
Manuale d’installation  
Manuale di installazione  
Caméra numérique jour/nuit  
15 bits  
Telecamera giorno/notte  
digitale 15 bit  
FR  
IT  
Installationshandbuch  
Manual de Instalação  
15-Bit digitale Tag-/Nacht-  
DE Kamera  
Câmara digital dia/noite  
de 15 bits  
PT  
Manual de instalación  
安装说明  
Cámara día/noche digital  
de 15 bits  
ZH  
15 位数码日夜两用型摄像机  
ES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 3  
9. Do not defeat the safety purpose of the polarized or grounding-type  
plug. A polarized plug has two blades with one wider than the other. A  
grounding type plug has two blades and a third grounding prong. Both  
the wide blade and the third prong are provided for your safety. If the  
supplied plug does not fit into your outlet, consult an electrician for  
advice.  
10. Protect the power cord from being walked on or pinched particularly at  
plugs, convenience receptacles, and the point where they exit from the  
equipment.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Unplug this equipment during lightning storms or when unused for  
long periods of time.  
13. Refer all servicing to qualified service personnel. Servicing is required  
when the equipment has been damaged in any way, such as when  
power supply cord or plug is damaged, liquid has been spilled or  
objects have fallen into the equipment, the equipment has been  
exposed to rain or moisture, does not operate normally, or has been  
dropped.  
14. An all-pole mains switch with a contact separation of at least 3mm in  
each pole shall be incorporated in the electrical installation of the  
building.  
Warning  
To reduce the risk of fire or electric shock, this apparatus should  
not be exposed to rain or moisture and objects filled with liquids,  
such as vases, should not be placed on this apparatus.  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 4  
FCC Information  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected.  
Consult the dealer or an experienced radio/ TV technician for help.  
Note  
Any change or modification of the equipment not expressly approved by  
Bosch could void the user's authority to operate the equipment. For  
additional information or to speak to a representative, please contact the  
Bosch Security Systems location nearest to you or visit our web site at  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 5  
Introduction  
The DinionXF Day/Night is a high-performance smart surveillance color  
camera. It incorporates 15-bit digital signal processing for outstanding  
picture performance under all lighting conditions. The DinionXF Day/Night  
is easy to install and ready to use, and offers the best solution for  
demanding scene conditions. Features include:  
Day/Night camera with mechanically switching IR filter  
Three pre-programmed operation modes  
Noise elimination, true color reproduction  
Adaptive dynamic range optimization  
Bilinx™ bi-directional coaxial communications  
Genlock including sub-carrier locking  
Enhanced video motion detection  
Type number overview  
Type number  
LTC  
0620/11  
LTC  
0620/21  
LTC  
0620/51  
LTC  
0620/61  
Standard  
Supply voltage  
CCD type  
PAL  
NTSC  
PAL  
NTSC  
24 VAC or 12 VDC  
230 VAC 50Hz 110 VAC 60Hz  
1/2"  
Type number  
LTC  
0495/11  
LTC  
0495/21  
LTC  
0495/51  
LTC  
0495/61  
Standard  
Supply voltage  
CCD type  
PAL  
NTSC  
PAL  
NTSC  
24 VAC or 12 VDC  
230 VAC 50Hz 110 VAC 60Hz  
1/3"  
Caution  
Ensure that your power supply matches the rated voltage of your  
camera before installing.  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 6  
Unpacking  
Unpack carefully and handle the equipment with care. The packaging  
contains:  
DinionXF Day/Night camera  
CS to C lens mount adapter  
CCD protection cap  
Spare lens connector (male)  
These instructions  
Note  
If equipment appears to have been damaged during shipment, repack it in  
the original packaging and notify the shipping agent or supplier.  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 7  
Connections  
Power  
Low voltage versions  
High voltage versions  
10mm  
For low voltage cameras:  
push in the tabs to open the quick-connectors (these connections are  
not polarity sensitive).  
use AWG16 to 22 stranded wire or AWG16 to 26 solid wire; cut back  
10mm (0.4") of insulation.  
Composite video  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 8  
Sync  
Y/C  
Pin  
Y/C socket  
1
3
4
1
2
3
4
GND Y  
GND C  
Y
2
C
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 9  
Alarm connector  
Alarm  
Pin  
Alarm socket  
1
2
3
4
Alarm in Ground  
Alarm in  
Relay out contact 1  
Relay out contact 2  
Pin 1  
Pin 4  
Max. wire diameter AWG 22-28 for both stranded and solid  
Default relay position n.o. (normally open), no alarm  
Alarm output relay switching capability: Max voltage 30VAC or  
+40VDC. Max 0.5 A continuous, 10VA.  
Alarm in: TTL logic, +5V nominal, +40VDC max, DC coupled with  
22kpull-up to +3.3V  
Alarm in: configurable as active low or active high  
Max. 42V allowed between camera ground and each of the relay pins.  
Lens mounting  
The camera accepts CS-mount lenses. C-mount lenses can be mounted  
using the lens adapter ring. DC-iris lenses are recommended for the best  
picture performance. The camera automatically detects the type of lens  
used and optimizes performance accordingly. A spare male lens connector  
is provided.  
Caution  
To avoid damaging the CCD sensor when using a C-mount lens,  
make sure the supplied lens adapter ring is mounted onto the  
camera before mounting the lens.  
Lenses weighing more than 0.5 kg (1.1lbs) must be separately  
supported.  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 10  
Bosch  
Bosch  
Pin  
Video iris lens  
DC iris lens  
1
2
3
4
Supply (11.5V 0.5, 50mA max.)  
Not used  
Damp -  
Damp +  
Drive +  
Drive -  
Video signal 1Vpp 1kOhm  
Ground  
Note  
If a short circuit is detected on the lens connector, the on-screen display  
(OSD) failure message LENS SHORT CIRCUIT is shown. The lens circuit  
is automatically disabled to avoid internal damage. Remove the lens  
connector and check the pin connections.  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 11  
Back focus adjustment  
To optimize picture sharpness in both bright and low-level lighting, adjust  
the back focus. Use the camera's unique Lens Wizard (see Advanced Set-  
up). This ensures that the object of interest always remains in focus even  
when focusing at the maximum lens opening.  
When back focusing vari-focus lenses, adjust to obtain a sharp picture in  
both wide-angle and tele positions for both far and near focus.  
When back focusing zoom lenses, ensure the object of interest remains in  
focus throughout the entire zoom range of the lens.  
To adjust back focus:  
1. Open the slide door at the side of the camera  
2. Unlock the back focus locking button.  
3. Turn the back focus adjustment as required.  
4. Lock the back focus locking button.  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 12  
Mounting the camera  
The camera can be mounted from the top or bottom. The bottom  
mounting is isolated from ground. With outdoor scenes, a DC-iris lens is  
recommended.  
Caution  
Do not point the camera/lens into direct sunlight.  
Day/Night switching  
The DinionXF Day/Night Camera is equipped with a motorized IR filter.  
The IR filter can be removed in low-light or IR illuminated applications.  
If Auto switching mode is selected, the camera automatically switches the  
filter depending on the observed light level. The switching level is  
programmable. In Auto switching mode the camera prioritizes motion (the  
camera gives sharp images without motion blur as long as the light level  
permits) or color (the camera gives color pictures as long as the light level  
permits). The camera recognizes IR illuminated scenes to prevent  
unwanted switching to color mode.  
There are four different methods of switching:  
via the alarm input,  
via Bilinx™ communication,  
as part of the programmable mode profile, or  
automatically, based on the observed light levels.  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 13  
Advanced Set-up  
The DinionXF Day/Night normally provides an optimal picture without the  
need for further adjustments. However, advanced set-up options are  
available for getting the best results from the camera under special  
circumstances. There are two main menus; a Mode menu and an Installer  
menu.  
The camera has three pre-programmed operating modes that can be  
selected in the Mode menu. These modes are pre-programmed by default  
but you can adjust them according to your preferences. The Mode menu  
allows you to select and set-up the picture enhancement functions for each  
mode. If you are not happy with your changes, you can always recall the  
default values for the mode.  
The camera also has an Installer menu in which the installation settings  
can be set.  
The Mode and Installer menus have functions that can be selected  
directly or submenus for more detailed set-up.  
Accessing and navigating menus  
Five keys, located behind the side panel, are used for navigating through  
the various menus.  
To access the set-up menus, press the menu/select key (center).  
The main menu appears on the OSD. Use the arrow keys for navigation.  
When the Bilinx™ communications link is active, the buttons on the  
camera are disabled. You can also set up Bilinx™ so that the camera  
buttons remain disabled even when Bilinx™ is not actively controlling the  
camera. This prevents unauthorized change of the camera settings.  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 14  
Menu Structure  
Mode  
Mode  
ALC  
Enhance  
Color  
BLC  
ALC  
ALC level  
Shut/Gain  
Peak / average  
ALC speed  
Shut/Gain  
Shutter  
Defshut  
Sens up  
Gain  
Max. gain  
Day/Night  
VMD  
Mode ID  
Defaults  
Exit  
ENHANCE  
Autoblack  
Blacklevel  
Contour  
Day/Night  
Switch level  
Priority  
IR Contrast  
Mono burst  
DNR  
XF-dynamic  
COLOR  
White balance  
WB speed  
R-gain  
G-gain  
B-gain  
Saturation  
BLC  
Area  
Area  
BLC  
BLC level  
BLC area  
VMD  
VMD  
Area  
Active  
Motion  
Sensitivity  
DEFAULTS  
Confirm  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 15  
Installer  
Lens Wizard  
I/O  
Sync  
Camera ID  
Defaults  
Exit  
Lens wizard  
Lens type  
Detected  
Set back focus  
Set level  
I/O  
Alarm  
Sync input  
Communication  
Cable comp  
Comp level  
Alarm  
Alarm in  
Active  
Action  
Alarm out  
Sync  
Sync  
Detected sync  
V phase  
H phase  
Subphase  
Camera ID  
Camera ID  
ID position  
MAC address  
All Defaults  
Confirm  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 16  
Hints for menu navigation  
How to use the 5 keys  
Up key  
Menu/select key  
Right key  
Left key  
Lock  
Down key  
Press the menu/select key to access the menus or to move to the next  
or previous menu.  
Press the menu/select key for approximately 1.5 seconds to open the  
Installer menu.  
Use the up or down keys to scroll up or down through a menu.  
Use the left or right keys to move through options or to set parameters.  
When in a menu, quickly pressing the menu/select key twice restores  
the selected item to its factory default.  
To close all menus at once from any menu, select the Exit item and  
hold down the menu/select key until the menu display disappears.  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 17  
Mode menu  
Function  
MODE  
ALC  
Selection  
Description  
1, 2, 3  
Select operating mode  
Select submenu  
Select to access the video level control menu  
Select to access the picture enhancement menu  
Select to access the color control menu  
ENHANCE Select submenu  
COLOR  
BLC  
Select submenu  
ON, OFF,  
Select submenu  
To enable Back Light Compensation (BLC)  
operation set to ON  
Select to access the BLC menu  
VMD  
OFF, SIL, OSD  
Select submenu  
To enable Video Motion Detection (VMD)  
operation set to SIL (silent) or OSD (monitor  
alarm generates on-screen message)  
Select to access the VMD menu  
MODE ID  
10 character string Editable name for the selected mode  
DEFAULTS Select submenu  
Return all settings for the selected mode to  
factory defaults  
EXIT  
Exit the menu  
ALC submenu  
Function  
Selection  
Description  
ALC LEVEL -15 - 0 - +15  
Adjusts the video output level  
SHUTGAIN Select submenu  
Select to access the Shutter and Gain control  
menu  
PEAK  
AVERAGE  
-15 - 0 - +15  
Adjust the balance between peak and average  
video control  
ALC SPEED Slow, Medium, Fast Adjust the speed of the video level control loop.  
EXIT Return to MODE menu  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 18  
ALC --> Shutter/Gain submenu  
Function  
Selection  
Description  
SHUTTER  
AES, FL, FIXED  
AES - auto-shutter - the camera automatically  
sets the optimum shutter speed for manual iris  
lenses  
FL - flickerless mode avoids interference from  
light sources (recommended for use with video  
iris or DC iris lenses only)  
FIXED - allows a user defined shutter speed  
DEFSHUT  
FIX SHUT  
1/60 (1/50), 1/100,  
1/120, 1/250,  
1/500, 1/1000,  
1/2000, 1/5000,  
1/10K  
Only available if SHUTTER is AES. The camera  
tries to maintain the selected shutter speed as  
long as the light level of the scene permits.  
1/60 (1/50), 1/100,  
1/120, 1/250,  
1/500, 1/1000,  
1/2000, 1/5000,  
1/10K  
Only available if SHUTTER is FIXED. Selects  
shutter speed.  
SENSUP  
GAIN  
OFF, 2x, 3x, …,10x  
Selects the factor by which the sensitivity of the  
camera is increased.  
AGC, FIXED  
In AGC mode the camera automatically sets the  
gain to the lowest possible value needed to  
maintain a good picture  
In FIXED mode the gain is set at a predefined  
not scene dependent value  
MAXGAIN  
FIXGAIN  
0, 1, ... 26  
0, 1, ... 26  
Available in AGC mode only. Selects the  
maximum value the gain can have during AGC  
operation.  
Available in FIXED gain operation only. Selects  
the gain setting.  
DAY/NIGHT Select submenu  
EXIT  
Select to access the day/night control menu  
Return to the ALC menu  
Note  
If SENS UP is active, some noise or spots may appear in the picture. This  
is normal camera behavior. SENS UP may cause some motion blur on  
moving objects.  
If the camera is in monochrome mode, all color related menu items are  
disabled and cannot be accessed.  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 19  
Day/Night submenu  
Function  
Selection  
Description  
DAY/NIGHT COLOR,  
MONO,  
• In COLOR mode the camera will always give a color image.  
In MONO mode the IR filter is removed, giving full IR  
sensitivity in a monochrome image.  
AUTO  
In AUTO mode the camera switches the filter depending  
on the scene illumination level.  
LEVEL  
-15 - 0 - +15 To set the video level at which the camera switches to  
monochrome operation in AUTO DAY/NIGHT mode.  
PRIORITY  
COLOR,  
MOTION  
In AUTO mode:  
COLOR: the camera gives a color image as long as the  
light level permits.  
MOTION: the camera avoids motion blur as long as the  
light level permits.  
IR  
NORMAL,  
In ENHANCED mode the camera will optimize contrast  
CONTRAST ENHANCED in applications with high IR illumination levels.  
In NORMAL mode the camera will optimize contrast in  
mono application with visible light illumination.  
MONO  
BURST  
ON, OFF  
If selected OFF The Color Burst in the video signal is  
switched OFF in monochrome mode of the camera.  
If selected ON the Color Burst remains active even in  
Monochrome mode of the camera.  
EXIT  
Return to Shutter/Gain submenu.  
Enhance submenu  
Function  
Selection  
ON, OFF  
Description  
AUTO BLACK  
Autoblack ON automatically increases the  
visibility of details  
BLK LEVEL  
-50, ... 0, ...+50 Adjusts the black level between 0 and approx  
110mV. Zero position of slider corresponds to the  
factory default black level  
CONTOUR  
-15 - 0 - +15  
Adjusts the sharpness of the picture. 0  
corresponds to the default position.  
DNR (dynamic  
noise reduction)  
AUTO, OFF  
In AUTO mode the camera automatically reduces  
the noise in the picture. This may cause some  
motion blur on moving objects.  
XF-DYN (dynamic  
range enhancement)  
OFF, LOW,  
MID, HIGH  
In XF-DYN mode the camera automatically  
optimizes the contrast in the picture.  
EXIT  
Return to Mode menu  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 20  
Color submenu  
Function  
Selection  
Description  
WHITE  
BALANCE  
ATW, MANUAL,  
AWB HOLD  
ATW: Auto tracking white balance allows the  
camera to constantly adjust for optimal color  
reproduction.  
AWB HOLD: Puts the ATW on hold and saves  
the color settings.  
In MANUAL mode the Red, Green and Blue gain  
can be manually set to a desired position  
WB SPEED Slow, Medium, Fast Adjust the speed of the white balance control  
loop.  
RED gain  
-5 - 0 - +5  
ATW mode and AWB hold mode: adjusts the  
Red gain to optimize the white point.  
BLUE gain -5 - 0 - +5  
ATW mode and AWB hold mode: adjusts the B  
gain to optimize around the white point.  
RED  
GREEN  
BLUE  
-50 - 0 - +50  
Controls all the colors individually for manual  
white balance only.  
SAT  
+15, … 0, … +5  
Adjusts the color saturation. -15 will lead to a  
monochrome image  
EXIT  
Return to Mode menu  
Back Light Compensation (BLC) submenu  
Function  
Selection  
Description  
BLC  
ON, OFF  
When ON, the video level is optimized for the  
selected area of the image. Parts outside this area  
may be underexposed or overexposed (this is  
normal).  
BLC LVL  
AREA  
EXIT  
-15,..0,..+15  
BLC LEVEL adjust the balance between the  
selected BLC area and its surrounding.  
Select submenu  
Select to access the Back Light Compensation  
area menu (see selecting an area).  
Return to Mode menu  
Selecting an area  
To set-up an area for BLC (or VMD), access the area menu by selecting the  
AREA option from the BLC (or VMD) menu. Upon entering the AREA  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 21  
menu, the current area is displayed with the upper left corner flashing. The  
flashing corner of the image can be moved with the Up, Down, Left, Right  
arrow keys. Pressing the Select key moves the flashing cursor to the  
opposite corner, which can now be moved. Pressing Select again freezes  
the area and exits the area menu.  
Video Motion Detection (VMD) submenu  
Function  
Selection  
Description  
VMD  
OFF, SIL, OSD  
When VMD is enabled and the camera can  
generate SIL (silent) or OSD (monitor alarm  
generates on-screen message) motion alarms.  
AREA  
1, 2, 3, 4,  
Select submenu  
It is possible to set 4 motion sensitive areas (per  
MODE).  
Press SELECT to enter the area set-up menu.  
ACTIVE  
MOTION  
SENS  
ON, OFF  
Every area can be enabled individually by  
selecting YES.  
Press SELECT to  
reset indicator  
Indicates the peak of measured motion in the  
selected area  
Use the LEFT/RIGHT keys to set the SENSitivity  
for motion to the desired level. Motion above this  
level triggers alarm.  
EXIT  
Return to Mode menu  
Note  
If VMD areas overlap, motion is only detected in the area with the lowest  
sequence number.  
Defaults submenu  
Function  
Selection  
Description  
MODE  
DEFAULTS  
Select to restore the factory defaults. A  
confirmation screen appears. Allow 5 seconds for  
the camera to optimize the picture after a mode  
reset.  
EXIT  
Return to Mode menu  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 22  
Installer Settings  
Install menu  
Function  
Selection  
Description  
LENS  
Select submenu  
Select to optimize camera lens combination  
WIZARD  
I/O  
Select submenu  
Select submenu  
Select to access the I/O functions  
Select to access the synchronization functions  
Select to access ID menu  
SYNC  
CAMERA ID Select submenu  
DEFAULTS Select submenu  
EXIT  
Return all settings for all modes to factory defaults  
Exit the menu  
Install lens wizard submenu  
Function  
Selection  
Description  
LENS TYPE AUTO, MANUAL,  
DCIRIS, VIDEO  
In AUTO mode the camera auto detects the type  
of lens used or force the camera into a mode.  
DETECTED  
If the LENS TYPE detection is in AUTO, the  
detected lens type will be shown.  
SET BACK  
FOCUS  
NOW  
Select to force lens to its maximum opening. After  
focusing the lens the object of interest remains in  
focus in bright and low light conditions.  
SET LVL  
(Video iris lenses only). The level detector  
indicator must be set to the center by adjusting  
the level potentiometer on the lens, to obtain the  
best picture performance.  
EXIT  
Return to the INSTALL menu  
Adjustment procedure DC-iris Lens:  
1. Unlock the back focus locking button.  
2. Access the Lens Wizard menu.  
3. SET BACK FOCUS NOW is highlighted in the menu.  
4. Turn the back focus adjustment as required.  
5. Lock the back focus locking button.  
6. Exit the menu.  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 23  
Adjustment procedure Manual-iris Lens:  
1. Unlock the back focus locking button.  
2. Adjust the lens to the maximum lens opening.  
3. Turn the back focus adjustment as required.  
4. Lock the back focus locking button.  
Adjustment procedure Video-iris Lens:  
1. Unlock the back focus locking button.  
2. Access the Lens Wizard menu.  
3. SET BACK FOCUS NOW is highlighted in the menu.  
4. Turn the back focus adjustment as required.  
5. Lock the back focus locking button.  
6. Select SET LVL in the menu; the LEVEL bar appears.  
7. Point the camera at the scene it will be mostly viewing.  
8. Adjust the level potentiometer located on the lens until the  
LEVEL bar is in the central position.  
9. Exit the menu.  
Note  
The best performance with video iris lenses is obtained when the peak/  
average potentiometer of the lens is set to either full average or full peak  
matching the position of the peak/average balance in the MODE x ALC  
menu.  
Install I/O submenu  
Function  
Selection  
Description  
SYNC IN  
75 Ohm, HIGH  
Select 75 Ohm if the external sync input is not  
terminated elsewhere.  
COMM  
ON, OFF  
If OFF, Bilinx communication is disabled.  
CABLE  
COMP  
OFF, DEFAULT,  
RG59, COAX12,  
COAX6  
Cable compensation is used to avoid the need for  
amplifiers in long distance coax connections up to  
1000m (3000ft). For optimum results select the  
coaxial cable type used or if unknown, DEFAULT.  
COMP  
LEVEL  
0, 1, .. +15  
Sets the level of cable compensation.  
ALARM  
EXIT  
Select submenu  
Return to the INSTALL menu  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 24  
Install I/O --> Alarm submenu  
Function  
Selection  
Description  
ACTIVE  
NONE, HIGH,  
LOW  
Selects active_HIGH or active_LOW for the alarm  
input connector. Select NONE to disable alarm  
switching.  
ACTION  
NONE, MONO,  
MODE1,MODE2,  
MODE3  
Selects the operating mode of the camera upon  
switching the alarm input.  
ALARM  
OUT  
VMD, REMOTE, Select VMD to close the output relay upon VMD  
alarms.  
DAY/NIGHT,  
Select REMOTE to make the output relay available  
to remote communication devices.  
FILTER MOVE  
Day/night: the alarm output relay closes if the  
camera operates in monochrome mode.  
Filter move: the alarm output relay closes before the  
filter starts moving (in either direction) and opens  
when the video level has stabilized (2 - 3 seconds).  
EXIT  
Return to the I/O menu  
Install sync submenu  
Function  
Selection  
Description  
SYNC  
INTERNAL, LINE Select INTERNAL for free running camera operation,  
LOCK, HV  
LOCK,  
select LINE LOCK to lock to the power supply  
frequency, select HV LOCK to lock to the signal  
supplied to the external sync input, select  
GENLOCK to lock the subcarrier as well.  
GENLOCK  
DETECTED  
SYNC  
Shows the actual sync mode used by the camera.  
VPHASE  
0, 2, … 358  
Adjusts the vertical phase offset (when in LINE  
LOCK mode and a valid power supply frequency is  
detected).  
HPHASE  
-25, …, 0, …  
+125  
Adjust the horizontal phase offset (when in EXT lock  
mode and a valid input signal is detected)  
SUB  
PHASE  
0, 2, … 358  
Adjusts the sub-carrier phase offset (when in EXT  
LOCK mode and a valid sub-carrier is detected).  
EXIT  
Return to the INSTALL menu  
Note  
VPHASE, HPHASE and SUB-PHASE cannot be accessed if there is no  
valid locking signal.  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 25  
Install ID submenu  
Function  
Selection  
Description  
CAMERA ID  
Enter a 16 character camera name string. Use  
LEFT/RIGHT to change position in the string, use  
UP/DOWN to select the character. Use SELECT  
to exit the string edit screen.  
ID POS  
EXIT  
OFF, TOP, BOT  
Select TOP to display the camera ID in the upper  
left corner; select BOT for the lower left corner.  
The ID string is not displayed when the OSD  
menus are open.  
Return to the INSTALL menu  
Defaults submenu  
Function  
Selection  
Description  
ALL  
DEFAULTS  
Select to restore the factory defaults. A  
confirmation screen appears. Allow 5 seconds for  
the camera to optimize the picture after a mode  
reset.  
EXIT  
Return to Mode menu  
Camera Control Communication  
This camera is equipped with a coaxial communications transceiver. In  
combination with VP-CFGSFT, the camera can be adjusted from the head-  
end side of the coaxial cable. All menus can be accessed remotely giving  
full control of the camera. With this communication it is also possible to  
disable the local keys on the camera.  
To avoid loss of communication on an installed camera, the  
COMMUNICATION ON/OFF selection is NOT available while using  
remote control. This function can only be accessed with the camera  
buttons.  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 26  
Technical specification  
1/2" CCD versions  
Type number  
LTC  
0620/11  
LTC  
0620/21  
LTC  
0620/51  
LTC  
0620/61  
Standard  
PAL  
NTSC  
PAL  
NTSC  
Active pixels  
752x582  
768x492  
752x582  
768x492  
Rated supply  
voltage  
24 VAC or 12 VDC  
12-28 VAC (50/60 Hz)  
11-36 VDC  
230 VAC 50Hz, (/50)  
110 VAC 60Hz, (/60)  
Range: 100-240 VAC 10%  
50/60Hz  
Min illumination  
< 0.18 lux  
< 0.024 lux (in monochrome mode)  
1/3" CCD versions  
Type number  
LTC  
0495/11  
LTC  
0495/21  
LTC  
0495/51  
LTC  
0495/61  
Standard  
PAL  
NTSC  
PAL  
NTSC  
Active pixels  
752x582  
768x492  
752x582  
768x492  
Rated supply  
voltage  
24 VAC or 12 VDC  
12-28 VAC (50/60 Hz)  
11-36 VDC  
230 VAC 50Hz, (/50)  
110 VAC 60Hz, (/60)  
Range: 100-240 VAC 10%  
50/60Hz  
Min illumination  
< 0.24 lux  
< 0.038 lux (in monochrome mode)  
All versions  
Imager  
Interline CCD  
540 TVL  
Resolution  
SNR  
> 50 dB  
Video output  
Y/C output  
1 Vpp, 75 Ohm  
Y: 1 Vpp  
C: 0.3 Vpp  
Synchronization Internal, HV-lock, Genlock or Line Lock selectable  
Shutter AES (1/60 (1/50) to 1/100000), Flickerless, Fixed selectable  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 27  
All versions  
Day/Night  
Sens Up  
Auto black  
AGC  
Color, Mono, Auto  
Adjustable from OFF to 10x  
On, Off selectable (maximum level selectable up to 28dB)  
AGC on or off (0 dB) selectable  
XF-DYN  
DNR  
Automatic dynamic range enhancement level selectable  
Automatic noise filtering ON/OFF selectable  
Sharpness enhancement level selectable  
BLC On or Off selectable, with programmable area  
Contour  
BLC  
White balance  
Automatic 2500 - 9000K (with AWB hold mode and manual mode)  
Color saturation Adjustable from monochrome (0%) to 133% color  
Lens Mount  
ALC lens  
CS compatible, C-mount compatible with supplied adapter ring  
Video or DC iris auto detect  
< 5 W  
Power  
consumption  
Dimensions  
Weight  
58 x 66 x 122 mm (HxWxL) without lens  
450g without lens  
Tripod Mount  
Bottom (isolated) and Top ¼" 20 UNC  
-20° to 50° C  
Operating  
temperature  
Controls  
OSD with softkey operation  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DinionXF | Installation Manual  
EN | 28  
Accessories  
Power transformers  
TC1334  
120VAC, 60Hz  
120VAC, 60Hz  
- 24VAC, 30VA  
- 15VDC, 9VA  
TC120PS  
TC220PSX-24  
TC220PS  
220-240VAC, 50/60Hz - 24VAC, 30VA  
220-240VAC, 50/60Hz - 15VDC, 9VA  
Interface box:  
VP-CFGSFT  
Bilinx™ communication interface box and software  
Recommended lenses  
Varifocal lenses:  
LTC 3264/30  
LTC 3274/40  
LTC 3364/21  
LTC 3364/31  
LTC 3364/40  
LTC 3374/20  
1/2" DC-iris, 4.5-10mm F1.6-360  
1/2" DC-iris, 7.5-75mm F2.2-360  
1/3" DC-iris, 2.8-6mm F1.4-300 - IR  
1/3" DC-iris, 3.5-8mm F1.4-300 - IR  
1/3" DC-iris, 2.8-12mm F1.4-360  
1/3" DC-iris, 5-50mm F1.4-185  
Zoom lenses:  
LTC 3283/20  
LTC 3384/21  
1/2" Video iris, 8-48mm F1.4-360  
1/3" DC-iris, 6-60mm F1.4-360  
Bosch Security Systems | 2004-01 | V1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bosch Sicherheitssysteme GmbH  
Ludwig-Bölkow-Allee  
85521 Ottobrunn  
Bosch Security Systems B.V.  
P.O. Box 80002  
5600 JB Eindhoven  
Germany  
The Netherlands  
© 2004 Bosch Security Systems B.V.  
Subject to change. Printed in Portugal.  
3122 165 23061  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Bloomfield Food Warmer 8708 User Manual
Boss Audio Systems Car Stereo System BV9564BI User Manual
Breckwell Stove P23FS User Manual
BRK electronic Fire Extinguisher FE3A40GR 6 User Manual
Brother Typewriter PT 1880 User Manual
Bushnell Binoculars 26 1020 User Manual
Canon Webcam 5d User Manual
Char Broil Gas Grill 463251012 User Manual
Christie Digital Systems Projector 103 002001 User Manual
Cisco Systems IP Phone OL 20862 01 User Manual